LAYHER SPEEDYSCAFCATALOGUE
®
Edition 04.2015Ref. No. 8102.256
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
EN_Katalog_Blitz_2015.indd 1 09.03.2015 13:22:50
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
2
Layher
QUALITY MADE BY LAYHER
ead arter in i en ac
Plant 2 in Gueglingen
HERE IS THE BEATING HEART OF LAYHER.
Quality made by Layher comes from Gueglingen-Eibensbach. Our company
has set down deep local roots since it was established. Right up until today,
development, production, logistics and management are all in one place, where
the conditions are best for achieving quality made by Layher: in Gueglingen-
Eibensbach. The two locations together cover a surface area of 318,000 m².
This includes more than 142,000 m² of covered production and storage areas.
This is where our scaffolding systems are created by highly automated
production. Short distances and short reaction times mean we can adapt
production to uit our cu to er re uire ent , exi ly and at any ti e
MORE POSSIBILITIES. THE SCAFFOLDING SYSTEM.
i rand pro i e ade y ay er i t e expre ion of a rand p ilo op y t at
e ve een living y for over 7 year ore peed, ore afety, ore proxi ity,
more simplicity and more future: values with which we strengthen our customers’
competitiveness in the long term. With our innovative systems and solutions,
we’re working all the time on making scaffolding construction even simpler, even
more economical and, above all, even safer. With comprehensive services, a
permanent range of training courses and an ethos of customer focus, more than
1,500 dedicated Layher employees are creating more possibilities for our
customers every single day. In more than 30 countries all over the world.
EN_Katalog_Blitz_2015.indd 2 09.03.2015 13:22:56
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
3
More Possibilities. The Scaffolding System.
MORE SPEEDWe can supply any required quantity of the right products at the right time – to anywhere in
t e orld ay er a u idiarie in ore t an 3 countrie in all five continent , it a
tight-knit network of national service centers. Speed is also the motto of our logistics
concept. Customers have the choice of picking up their material at a Layher service center or
having it delivered either to a warehouse or “just in time” directly to the site.
MORE EXPERIENCEradition a gro n into experience and experti e ur expert pa on t i no ledge all
over t e orld xi ting cu to er ig t ant to try a different approac , ile ne
customers might need support when assembling a Layher scaffolding structure. Layher’s
peciali t get to grip it t e pecific ta and re uire ent , devi ing for our cu to er
per ua ive olution t at are ot profita le and efficient ood advice fro ay er i
guaranteed. We take care of our customers at every level, because cooperation with them on
the basis of mutual trust as well as their success are important to us.
MORE KNOWLEDGEFurther training is the key to success. For this reason, Layher organizes regular training
e inar t at prepare our cu to er for current and future c allenge pecifically in
caffolding i training c e e i ac ed up y any ot er option , for exa ple practical
product training cour e and regular eeting for caffolding erector to pro ote t e o of
infor ation et een expert and colleague nd la t ut not lea t, ay er offer
comprehensive publications on all topics to do with scaffolding construction.
MORE CLARITYSaving ti e, u ing aterial in t e e t ay, i proving logi tic ll t at can e done it
ay er planning oft are, ay , or t e pecial ay er tool for uto ay er
software means greater reliability when budgeting and planning scaffolding construction
projects. Optimization of inventory management and complete cost transparency for the
material used in a project. Once the dimensions and the required assembly variant have been
entered, the Layher software supplies a scaffolding proposal with matching material list
within seconds.
MORE QUALITYPeople talk a lot about quality. We just produce it. Quality from Layher means state-of-the-art
production proce e , carefully elected aterial , art auto ation and a ig ly ualified
or force ur product co ply it t e very late t ecurity tandard and po e I IS
certification, er an approval, and any ot er er an and international uality la el
20,000 kilometres of steel tubing in high-quality workmanship are convincing testimony to
Layher’s quality standards.
EN_Katalog_Blitz_2015.indd 3 09.03.2015 13:23:09
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
4
Lightweight
Layher has been the driving force behind game-changing innovation in scaffolding for more than 70 years. In 1965, Layher SpeedyScaf revolutionised the industry; and 1 7 a t e launc of ay er llround Scaffolding, a odular product portfolio t at too t e orld ar et y tor nd t e uni ue llround connector ept a ay conventional scaffolding technology.
But the time is now ripe for a new dimension in scaffolding: Layher Lightweight. Our mission has always been to lighten your load. In this case, we have taken our mission literally. By working hand-in-glove with our steel suppliers, Layher engineers have ucceeded in developing pecial ig ten ile teel a teel t at ignificantly
lo er t e eig t of co ponent e pite reduced all t ic ne and lo er eig t, these new Layher products deliver higher load-bearing capacity than the proven llround y te e ne connector create con idera ly tronger tran ition e innovative ledger uto oc ean fa ter caffolding erection and i proved afety
nd e t of all t e ig t eig t line i co pati le it conventional ay er caffolding So you can continue to u e your exi ting ay er co ponent ll of t e
LIGHTWEIGHTBUT BETTER AND STRONGER.
I I I S I I I S
Enhanced load-bearing capacity.
Lower weight.
ully co pati le it all llround co ponent
ay er i a out ore po i ilitie nd t e ig t eig t line underline our pioneering role, y ar ing a ne ile tone It i t e re ult of a a or, ulti year pro ect it a clearly defined o ective to a e caffolding ea ier, afer and a ove all ore co t effective for you, our customers.
The modular Layher Lightweight line will revolutionise the erection and dismantling of challenging scaffolding structures. The use of high-tensile steel allows reduced wall t ic ne , delivering a ignificant eig t aving and ig er load earing capacity The result is lighter components, easier and faster erection, and lower shipment costs.
Higher productivity and lower shipment costs mean that an investment in Layher Lightweight pays for itself within less than one year.
I S I I S S
THE NEW LIGHTNESSOF BEING LAYHER.
I S
EN_Katalog_Blitz_2015.indd 4 09.03.2015 13:23:10
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
5
LLLAAAYYYAYAAYAAYA HHHEEER
L IG H T W EEIIGG
HHTTTTTTTTTTTTTT
S S SS
it t e a e ly fra e x 1 , t e tile all t ic ne a cut and t e profile rede igned, delivering a total eig t aving of 3 g
With the gantry frame LW 1.50 m, the wall thickness was also cut. Combined with the rede igned profile, t i deliver a total eig t aving of g
Scaffolding can be erected more quickly; working conditions are improved; each truck can carry more material.
Fully compatible with all SpeedyScaf components.
pproval applied for
To view video of SpeedyScaf Lightweight, simply scan QR code.
S S SS S S
LAYHER
L IG H T W EIG
HT
R
GHT
WEIGHT
S I
4.2 KG
SPEEDYSCAF LIGHTWEIGHT
EN_Katalog_Blitz_2015.indd 5 09.03.2015 13:23:12
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
6
e ly fra e , tra dec , o u t dec , Stalu dec , teel dec can be stamped individually. Wooden toe boards can be printed according to your preferences. Anti-theft protection and advertising in one.
your ay er partner and order t e ro c ure ay er Individual for free
I I I
Contents
LAYHER SPEEDYSCAF®
IND
Speedyscaf System
ef o 81 6
Allround Scaffolding System
ef o 8116
Scaffolding Accessories
ef o 81 3
Protective Systems
ef o 81 1 3
Event Systems
ef o 8111 7
Rolling Towers Ladders and Stairs
ef o 8118
LAYHER SPEEDYSCAF SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8102.256
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Edition 04.2015Ref. No. 8111.227
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER EVENT SYSTEMSCATALOGUE
LAYHER PROTECTIVE SYSTEMSCATALOGUE
Edition 04.2015Ref. No. 8121.253
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
LAYHER SCAFFOLDING ACCESSORIESCATALOGUE
Edition 04.2015Ref. No. 8103.254
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Rolling Towers
LAYHER LADDERS & STAIRSLAYHER ROLLING TOWERS
CATALOGUE
Edition 04.2015Ref. No. 8118.225
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
S
2 Brackets Page 22
2 Stairway access Page 28
2 Scaffolding decks Page 14
2 Assembly frames Page 12
EN_Katalog_Blitz_2015.indd 6 09.03.2015 13:23:20
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
7
etailed tec nical infor ation can e found in our SpeedyScaf Technical Brochure.
CONTENTS2 S S S S 8
2 S S I S I 10
2 S S 10
2 SS S, SS I 12
2 S I S 14
2 SS S 16
2 SI I 18
2 I I 20
2 S 22
2 I 24
2 S I , S I I , I S 26
2 S I SS, S I 28
2 S S I , SS S, SS I S 30
2 SS I S 32
2 I , I I 34
2 SS I S, S 36
2 I , S I S 38
2 I 40
ll di en ion and eig t are guideline value Su ect to tec nical odification
Steel part are galvani ed according to IS and 1 811
ur deliverie all e ade exclu ively in accordance it our currently valid eneral er of Sale. These include the following provisions: The place of performance is Gueglingen-Eibens-bach. Title to the delivered goods shall be retained until full payment has been made.
lea e re ue t t e pecific in truction for a e ly and u e en ordering rotected y copyrig t ot to e reproduced, eit er in ole or in part i print and error excepted
Rolling Towers Ladders and Stairs
ef o 8118
2 Side protection Page 18
2 System lattice beams Page 30
EN_Katalog_Blitz_2015.indd 7 09.03.2015 13:23:20
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
8
Guardrail
Toe board
Scaffolding deck
Diagonal brace
Base plate
Assembly frame
SpeedyScaf System
This catalogue provides you with an overview of all the basic elements and accessories for the following scaffolding variants:
SpeedyScaf 0.73 m wide, hot-dip galvanized steel,up to load cla 3 a per I 1 811
SpeedyScaf 0.73 m wide, aluminium,up to load cla 3 a per I 1 811
SpeedyScaf 1.09 m wide, hot-dip galvanized steel,for load cla e 6 a per I 1 811 (depending on deck design and bay length).
Layher SpeedyScaf has general building authority approval from the eut c e In titut f r autec ni er an ivil ngineering In titute in
Berlin under the approval numbers Z-8.1-16.2 SpeedyScaf 70 in steel,Z-8.1-840 SpeedyScaf 100 in steel and Z-8.1-844 SpeedyScaf 70 in aluminium for regular version up to 24 m, plus possible spindle adjustment.
ype te t y 6 y t e In pection ffice for Structural ngineering Statics in Stuttgart relates to 10 standard versions of Layher SpeedyScaf 70 Steel with platform heights of up to 80 m. Structural calculations are availa le for ot er pecial exten ion ver ion
Simple frame scaffolding
it u t ix a ic ele ent and a fe anual operation , this logically and safely erected scaffolding is “speedy” because it is assembled without bolts. Established on the market for several decades as the frame scaffolding e uip ent t at lead t e field, you can cater for al o t every requirement with this unbeatably lightweight yet sturdy and stable system: Standard assembly is achieved with the following 6 basic components:2 Base plates 2 assembly frames 2 scaffolding decks 2 guardrails 2 diagonal braces 2 toe boards
epending on t e roof pro ection, opti u ad u t ent i achieved using brackets.
With Layher you choose between different scaffolding widths and between hot-dip galvanized steel or lightweight aluminium. Guardrails, diagonal braces and scaffolding decks are only needed once, a t ey fit into every SpeedyScaf structure.
EN_Katalog_Blitz_2015.indd 8 09.03.2015 13:23:23
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
9
Unbeatably quick and easy. Speedy assembly thanks to simple insertion technology, lightweight a e ly fra e and ergono ic andling e led fro ix a ic elements in a few easy operations.
Safe from the word go. nco pro i ing afety during a e ly too ir ly edged co -
ponent , po itively and non po itively connected, en ure axi u stability while work is in progress.
Extremely flexible. The comprehensive range of parts is suitable for every trade. Combinable with other Layher systems and products.
Extremely economical. Simplicity and fitting precision mean a saving in time and enor ou co t aving too xe plary and long ervice life plu availability for purchase to come.
I S
EN_Katalog_Blitz_2015.indd 9 09.03.2015 13:23:33
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
10
Software for scaffolding construction
Software for scaffolding construction Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 SINGLE LICENCELayPLAN SpeedyScaf system incl. material manager
6345.200 W
2 FOLLOW-UP LICENCELayPLAN SpeedyScaf system incl. material manager
6345.201 W
Base plates Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
3 3 Scaffolding plankfor load distribution 45 mm high, freshly sawn, sorting category S 10
1 x 5.2 3816.100 P
1 x 7.8 3816.150 P
4 5 6 7 8 4 Base plate 60 ax pindle travel 1 c
0.60 3.6 200 4001.060
5 Base plate 80, reinforced ax pindle travel c
0.80 4.9 200 4002.080
6 Base plate 150, reinforced ax pindle travel 1 c , en ure ufficient tructural trengt
1.50 10.0 25 4002.130
7 Swivelling base plate 60, reinforcedax pindle travel 3 c , en ure ufficient tructural trengt
0.60 6.1 250 4003.000
8 Wedge spindle swivel coupler 1.8 25 4735.000 W
Base plates
Possibility of directly connecting 48.30 mm dia. scaffolding tubes to the threaded tube of a base plate at any angle.
To adjust to the ground, choose between different height-adjustable base plates with sturdy and self-cleaning round threads, with colour and notch markings to provide protection against overwinding.
a e ure t at t ere are ufficient load di tri uting surfaces.
The round threads of all Layher scaffolding spindles have an out ide dia eter of 38 and a pitc of 8 1
e ing external di en ion of t e pindle nut i e di en ion of t e foot plate are 1 x 1
urt er infor ation can e found in our cce orie Catalogue.
130 cm
41 cm 55 cm32 cm
30 cm
e clearly tructured interface of ay i elfexplanatory i o viate t e need for u er cour e or t e tudy of t ic anual co pact et of in truction i provided on t e progra
Planning of façade scaffolding using a computer is now even ea ier e ne ay oft are i ply a e proposals for scaffolding, calculates the effort for assembly and dismantling, and provides printed out plans for more safety at the site. The completed drawing can e exported to uto , ic can e u ed to do further editings. Complete scaffolding in just three steps:
2 Step 1: Plan out the scaffolding with the clearly tructured ay oft are
2 Step 2: The printed-out plan provides you with the legal afeguard re uired y etrSic and a i t you in your logistics.
2 Step 3: Planning saves you time when assembling the scaffolding – all the material needed is at the site.
EN_Katalog_Blitz_2015.indd 10 09.03.2015 13:23:35
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
11
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Software for scaffolding construction Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 SINGLE LICENCELayPLAN SpeedyScaf system incl. material manager
6345.200 W
2 FOLLOW-UP LICENCELayPLAN SpeedyScaf system incl. material manager
6345.201 W
Base plates Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
3 3 Scaffolding plankfor load distribution 45 mm high, freshly sawn, sorting category S 10
1 x 5.2 3816.100 P
1 x 7.8 3816.150 P
4 5 6 7 8 4 Base plate 60 ax pindle travel 1 c
0.60 3.6 200 4001.060
5 Base plate 80, reinforced ax pindle travel c
0.80 4.9 200 4002.080
6 Base plate 150, reinforced ax pindle travel 1 c , en ure ufficient tructural trengt
1.50 10.0 25 4002.130
7 Swivelling base plate 60, reinforcedax pindle travel 3 c , en ure ufficient tructural trengt
0.60 6.1 250 4003.000
8 Wedge spindle swivel coupler 1.8 25 4735.000 W
IND
2 Material manager: Processing, managing and printing out of material lists
EN_Katalog_Blitz_2015.indd 11 09.03.2015 13:23:36
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
12
Euro assembly frames Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 3 4 1 Euro assembly frame, steel, Standard fra e x 73 it 2 guardrail wedge housings only external guardrail
x 73 18.8 24 1700.200
2 Euro assembly frame, steel, Standard fra e x 73 it 4 guardrail wedge housings external and internal guardrail
x 73 19.6 24 1710.200 W
3 Euro assembly frame LW, steel, z Standard fra e x 1 , with 2 guardrail wedge housingsonly external guardrail
x 1 21.5 24 1780.200
5a 5b 5c 4 Euro assembly frame LW, steel, zStandard fra e x 1 , with 4 guardrail wedge housings external and internal guardrail
x 1 22.3 24 1785.200 P
5 Euro assembly frame, steel,a d u t ent fra e 66 x 73
d u t ent fra e 1 x 73 c d u t ent fra e 1 x 73
it 1 guardrail edge ou ing and toe oard pin
66 x 73 9.3 75 1700.0661 x 73 11.9 50 1700.1011 x 73 15.8 24 1700.150
6a 6b 6c 6 Euro assembly frame LW, steel, za d u t ent fra e 66 x 1
d u t ent fra e 1 x 1 c d u t ent fra e 1 x 1
it guardrail edge ou ing and toe oard pin
66 x 1 11.5 75 1780.066 W1 x 1 13.8 50 1780.100 W1 x 1 14.9 24 1780.150 W
7 8a 8b 8c 7 Euro assembly frame, aluminium,Standard fra e x 73
x 73 8.6 24 1714.200
8 Euro assembly frame, aluminium,a d u t ent fra e 66 x 73
d u t ent fra e 1 x 73 c d u t ent fra e 1 x 73
it 1 guardrail edge ou ing and toe oard pin
66 x 73 4.1 75 1714.0661 x 73 5.2 50 1714.1011 x 73 6.7 24 1714.150 W
Euro assembly frames
Gantry frames and assembly frames for special applications, please see page 30.
Euro assembly framesThe construction principle of the assembly frames ensures speedy, and stable assembly: The upper crosspiece is designed as a channel section into which the decks slide easily during assembly. The corner plate for receiving the diagonal braces and the guardrail wedge housings for dropping in t e guardrail re uire no direct fitting or “aiming”; striking with a hammer blow ensures positive stable connections. The lower rectangular tube secures t e dec auto atically for furt er exten ion and t e toe board pin accommodates the toe boards.
Advantages of the Euro assembly frame:2 Low weight2 ery rapid a e ly of internal guardrail2 er atile po i ilitie for anc oring2 Fast vertical assembly without a spirit level2 axi u eig t clearance
ll all t ic ne e are approved for t e connection of couplers. The handy Layher assembly frame has no outwardly projecting parts – it runs smoothly through the hands, and i t erefore ergono ic ery lo external di en ion ave on transportation and storage space.
Adjustment frames
Scaffolding pallets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
9 9 Assembly frame pin pallet0.73 m1.09 m
1 x 77 34.0 10 5113.0731 x 1 13 36.2 10 5113.109 W
10 10 Retaining rod 1.20 2.1 5113.120
11 11 Retaining bar 1.12 3.1 5110.112
Scaffolding pallets
10
The assembly frame pin pallet 9 is an optimised and low-cost solution for vertical palletising. It holds up to 20 assembly frames and is dimensioned such that 3 of them can be placed side by side on the truck loading surface. Fork guides and a central rung ensure absolute safety against tilting during fork-lift transport.
Further information and further pallets see chapter scaffolding pallets on page 38.
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
The scaffolding can be adapted to the lie of the land with 66 , 1 and 1 ad u t ent fra e e ly
al ay egin at t e ig e t point e 1 x 1 assembly frame has two guardrail wedge housings, making it suitable for use in bricklayer’s scaffolding.
EN_Katalog_Blitz_2015.indd 12 09.03.2015 13:23:42
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
13
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Euro assembly frames Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 3 4 1 Euro assembly frame, steel, Standard fra e x 73 it 2 guardrail wedge housings only external guardrail
x 73 18.8 24 1700.200
2 Euro assembly frame, steel, Standard fra e x 73 it 4 guardrail wedge housings external and internal guardrail
x 73 19.6 24 1710.200 W
3 Euro assembly frame LW, steel, z Standard fra e x 1 , with 2 guardrail wedge housingsonly external guardrail
x 1 21.5 24 1780.200
5a 5b 5c 4 Euro assembly frame LW, steel, zStandard fra e x 1 , with 4 guardrail wedge housings external and internal guardrail
x 1 22.3 24 1785.200 P
5 Euro assembly frame, steel,a d u t ent fra e 66 x 73
d u t ent fra e 1 x 73 c d u t ent fra e 1 x 73
it 1 guardrail edge ou ing and toe oard pin
66 x 73 9.3 75 1700.0661 x 73 11.9 50 1700.1011 x 73 15.8 24 1700.150
6a 6b 6c 6 Euro assembly frame LW, steel, za d u t ent fra e 66 x 1
d u t ent fra e 1 x 1 c d u t ent fra e 1 x 1
it guardrail edge ou ing and toe oard pin
66 x 1 11.5 75 1780.066 W1 x 1 13.8 50 1780.100 W1 x 1 14.9 24 1780.150 W
7 8a 8b 8c 7 Euro assembly frame, aluminium,Standard fra e x 73
x 73 8.6 24 1714.200
8 Euro assembly frame, aluminium,a d u t ent fra e 66 x 73
d u t ent fra e 1 x 73 c d u t ent fra e 1 x 73
it 1 guardrail edge ou ing and toe oard pin
66 x 73 4.1 75 1714.0661 x 73 5.2 50 1714.1011 x 73 6.7 24 1714.150 W
IND
Scaffolding pallets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
9 9 Assembly frame pin pallet0.73 m1.09 m
1 x 77 34.0 10 5113.0731 x 1 13 36.2 10 5113.109 W
10 10 Retaining rod 1.20 2.1 5113.120
11 11 Retaining bar 1.12 3.1 5110.112
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
IND
IND
IND
IND
IND
IND
EN_Katalog_Blitz_2015.indd 13 09.03.2015 13:23:42
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
14
Scaffolding decks
Scaffolding decks Pos. Description up to load cla DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 U-steel deck T4, 0.32 m widesteel, hot-dip galvanizedperforated, non-slip working surface
6 73 x 3 6.0 60 3812.0736 1 x 3 8.4 60 3812.1096 1 7 x 3 11.9 60 3812.1576 7 x 3 15.0 60 3812.2075 7 x 3 18.2 60 3812.2574 3 7 x 3 21.5 60 3812.3073 1 x 3 29.8 60 3812.414
2 2 Steel tube, 33.70 mm, hot-dip galvanized it t roug t e edge ole of ef o 381
1.50 3.0 100 4603.150 W
3 3 U-steel deck, 0.19 m wideconstructed as 3812as equalizing deck, e.g. for birdcage scaffolding
6 73 x 1 5.1 50 3801.073 W6 1 x 1 6.4 50 3801.109 W6 1 7 x 1 8.5 50 3801.1576 7 x 1 10.2 50 3801.2075 7 x 1 13.2 50 3801.2574 3 7 x 1 15.3 50 3801.307
4 4 U-Xtra-N deck, 0.61 m widelu iniu tile ection, gla fi re reinforced pla tic plate
extre ely dura le, lig t eig t, non lip or ing urface
3 73 x 61 7.0 60 3866.0733 1 x 61 9.5 60 3866.1093 1 7 x 61 13.0 40 3866.1573 7 x 61 16.2 40 3866.2073 7 x 61 19.0 40 3866.2573 3 7 x 61 23.5 40 3866.307
5 5 U-stalu deck T9, 0.61 m wideextre ely lig t eig t alu iniu dec it turdy,riveted steel caps, stacking height only 54 mm
6 73 x 61 6.6 40 3867.073 W6 1 x 61 8.8 40 3867.109 W6 1 7 x 61 11.7 40 3867.1575 7 x 61 14.8 40 3867.2075 7 x 61 17.9 40 3867.2574 3 7 x 61 21.0 40 3867.307
6 6 U-stalu deck T9, 0.32 m wideconstructed as 3867as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 3 7.4 30 3856.157 W6 7 x 3 9.2 30 3856.207 W5 7 x 3 11.0 30 3856.257 W4 3 7 x 3 13.3 30 3856.307 W
7 7 U-stalu deck T9, 0.19 m wideconstructed as 3867as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 1 5.6 50 3857.1576 7 x 1 7.2 50 3857.2075 7 x 1 8.7 50 3857.2574 3 7 x 1 10.2 50 3857.307
8 8 Connecting clamp for Stalu deck 0.1 10 3856.000 W
9 9 U-alu deck, perforated, 0.32 m wideec and cap of alu iniu it ro u t teel cla
perforated, non-slip working surface
6 1 7 x 3 6.5 60 3803.157 W5 7 x 3 8.0 60 3803.207 W4 7 x 3 10.0 60 3803.257 W3 3 7 x 3 11.5 60 3803.307 W
10 10 U-robust deck, 0.61 m widelu iniu tile ection, ply ood panel 1
phenolic resin coating and rot protection;lightweight, non-slip, easily stackable
3 73 x 61 7.2 60 3835.073 W3 1 x 61 9.7 60 3835.109 W3 1 7 x 61 13.1 40 3835.1573 7 x 61 16.4 40 3835.2073 7 x 61 19.3 40 3835.2573 3 7 x 61 24.2 40 3835.307
11 11 U-robust deck, 0.32 m wideconstructed as 3835as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 3 9.9 30 3836.157 W5 7 x 3 11.5 30 3836.207 W4 7 x 3 14.7 30 3836.257 W3 3 7 x 3 16.0 30 3836.307 W
Our scaffolding decks comply with the requirements of I 1 811
In the Layher system, depending on the type of application and scaffolding group but also in accordance with your working requirements and priorities, choose from decks made of hot-dip galvanized steel, aluminium, wood or an aluminium frame with plywood board. The load-bearing capacity of the overall system must be observed. The claws of the Layher scaffolding decks slide ea ily during a e ly into t e ection of t e assembly frame, ensuring unbeatable speed of assembly.
The U-Xtra-N deck 4 is identical in construction with t e ro u t dec , ut i e uipped it a gla fi rereinforced plastic plate. It is very weather-resistant:
o rotting, no fungu gro t , no plit open rivet ole The breaking load of the plastic plate is about 3 times that of dry plywood. The surface has a proven anti-slip structure, which is very easy to clean. Plaster and dirt can be easily removed by using a high-pressure cleaner or a scraper.
The U-stalu deck 5-7 is a lightweightand durable aluminium deck with sturdy, riveted steel caps.
With the Connecting clamp for Stalu deck 8, several stalu decks can be connected to avoid pedestals in the case of load.
EN_Katalog_Blitz_2015.indd 14 09.03.2015 13:23:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
15
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6IND
Scaffolding decks Pos. Description up to load cla DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 U-steel deck T4, 0.32 m widesteel, hot-dip galvanizedperforated, non-slip working surface
6 73 x 3 6.0 60 3812.0736 1 x 3 8.4 60 3812.1096 1 7 x 3 11.9 60 3812.1576 7 x 3 15.0 60 3812.2075 7 x 3 18.2 60 3812.2574 3 7 x 3 21.5 60 3812.3073 1 x 3 29.8 60 3812.414
2 2 Steel tube, 33.70 mm, hot-dip galvanized it t roug t e edge ole of ef o 381
1.50 3.0 100 4603.150 W
3 3 U-steel deck, 0.19 m wideconstructed as 3812as equalizing deck, e.g. for birdcage scaffolding
6 73 x 1 5.1 50 3801.073 W6 1 x 1 6.4 50 3801.109 W6 1 7 x 1 8.5 50 3801.1576 7 x 1 10.2 50 3801.2075 7 x 1 13.2 50 3801.2574 3 7 x 1 15.3 50 3801.307
4 4 U-Xtra-N deck, 0.61 m widelu iniu tile ection, gla fi re reinforced pla tic plate
extre ely dura le, lig t eig t, non lip or ing urface
3 73 x 61 7.0 60 3866.0733 1 x 61 9.5 60 3866.1093 1 7 x 61 13.0 40 3866.1573 7 x 61 16.2 40 3866.2073 7 x 61 19.0 40 3866.2573 3 7 x 61 23.5 40 3866.307
5 5 U-stalu deck T9, 0.61 m wideextre ely lig t eig t alu iniu dec it turdy,riveted steel caps, stacking height only 54 mm
6 73 x 61 6.6 40 3867.073 W6 1 x 61 8.8 40 3867.109 W6 1 7 x 61 11.7 40 3867.1575 7 x 61 14.8 40 3867.2075 7 x 61 17.9 40 3867.2574 3 7 x 61 21.0 40 3867.307
6 6 U-stalu deck T9, 0.32 m wideconstructed as 3867as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 3 7.4 30 3856.157 W6 7 x 3 9.2 30 3856.207 W5 7 x 3 11.0 30 3856.257 W4 3 7 x 3 13.3 30 3856.307 W
7 7 U-stalu deck T9, 0.19 m wideconstructed as 3867as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 1 5.6 50 3857.1576 7 x 1 7.2 50 3857.2075 7 x 1 8.7 50 3857.2574 3 7 x 1 10.2 50 3857.307
8 8 Connecting clamp for Stalu deck 0.1 10 3856.000 W
9 9 U-alu deck, perforated, 0.32 m wideec and cap of alu iniu it ro u t teel cla
perforated, non-slip working surface
6 1 7 x 3 6.5 60 3803.157 W5 7 x 3 8.0 60 3803.207 W4 7 x 3 10.0 60 3803.257 W3 3 7 x 3 11.5 60 3803.307 W
10 10 U-robust deck, 0.61 m widelu iniu tile ection, ply ood panel 1
phenolic resin coating and rot protection;lightweight, non-slip, easily stackable
3 73 x 61 7.2 60 3835.073 W3 1 x 61 9.7 60 3835.109 W3 1 7 x 61 13.1 40 3835.1573 7 x 61 16.4 40 3835.2073 7 x 61 19.3 40 3835.2573 3 7 x 61 24.2 40 3835.307
11 11 U-robust deck, 0.32 m wideconstructed as 3835as equalizing deck, e.g. for birdcage scaffolding
6 1 7 x 3 9.9 30 3836.157 W5 7 x 3 11.5 30 3836.207 W4 7 x 3 14.7 30 3836.257 W3 3 7 x 3 16.0 30 3836.307 W
IND
IND
IND
IND
IND
IND
IND
EN_Katalog_Blitz_2015.indd 15 09.03.2015 13:23:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
16
Access decks, steel planks, gap decks
Access decks, steel planks, gap decks Pos. Description up to load cla DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 U-Xtra-N deck, 0.61 m wide, with integrated access ladder
ec urface of gla fi re reinforced pla tic, aluminium access hatch
3 7 x 61 25.4 40 3869.2573 3 7 x 61 29.5 40 3869.307
2 U-aluminium hatch-type access deck,0.61 m wide, with integrated access laddereasy access with aluminium deck surfaceand aluminium access hatch
3 7 x 61 24.0 40 3852.2573 3 7 x 61 28.0 40 3852.307
4 3 3 U-robust hatch-type access deck, 0.61 m wide, with integrated access ladder
3 7 x 61 24.0 40 3838.2573 3 7 x 61 27.4 40 3838.307
4 U-aluminium access deck, 0.61 m wideeasy access with aluminium deck surfaceand aluminium access hatch
3 1 7 x 61 15.1 40 3851.157 W3 7 x 61 17.0 40 3851.2073 7 x 61 20.0 40 3851.2573 3 7 x 61 24.5 40 3851.307
5 6 5 U-hatch-type steel access deck, 0.64 m widealuminium access hatch
4 7 x 6 28.9 30 3813.207 W4 7 x 6 38.0 30 3813.257 W
6 Corner deck, adjustablefor angles from 45° – 90°, with toe boardin steelin aluminium
3 0.61 21.5 50 3819.000 W3 0.61 14.4 25 3826.000 P
8 7a + b 7a Access ladder T15, steel, 7 rungs B for llround Scaffolding Sy te and SpeedyScaf Sy te
1 x 3 7.6 70 4008.007
7b Access ladder, steel, 7 rungs for SpeedyScaf System
1 x 3 7.8 70 4005.007
8 U-robust hatch-type access, 0.61 m, hatch offsetwithout ladder. For use with 4005.007
3 1 7 x 61 14.2 40 3858.157 W3 7 x 61 17.2 40 3858.207 W
9 U-robust hatch-type access, 0.61 m, hatch offset, with integrated access ladder
3 7 x 61 25.2 40 3859.257 W3 3 7 x 61 28.4 40 3859.307 W
9 10 10 Steel-gap cover, 0.32 m wide Construction height only 10 mm
e up to load cla 6 it axi iu gap idt of c
6 73 x 3 2.6 150 3881.000 W6 1 x 3 4.0 150 3881.001 W6 1 7 x 3 6.0 100 3881.002 W6 7 x 3 8.0 100 3881.003 W6 7 x 3 10.0 100 3881.004 W6 3 7 x 3 10.7 100 3881.005 W
11 11 Steel plank, 0.30 msystem-free, completely made of hot-dip galvanized steel
6 1 x 3 6.5 60 3880.100 W6 1 x 3 10.3 60 3880.150 W5 x 3 12.8 60 3880.200 W3 x 3 15.3 60 3880.250 W
12 14a + b Steel plank, 0.20 mconstructed as 3880
6 1 x 4.8 100 3878.100 W6 1 x 7.2 100 3878.150 W5 x 9.5 100 3878.200 W3 x 11.8 100 3878.250 W
13 12 Locking pin, plastic, dia. 11 mm 0.08 1.0 100 v 3800.006
13 Steel bolt, self-securing, dia 11 x 7 0.08 4.5 50 v 3800.007 W
15 14a Securing screw, long, steel hot-dip galvanized 19 WS 8 x 3 4.0 50 v 3800.009 W22 WS 8 x 3 3.9 50 v 3800.010 W
14b Securing screw, short, steel hot-dip galvanized B 19 WS x 2.3 50 v 3800.011 W22 WS x 2.3 50 v 3800.012 W
15 Telescopic U-gap deck z closes gaps between 40 and 255 mm
6 0.73 5.2 40 3881.073 W6 1.09 7.8 40 3881.109 W6 1.40 10.1 40 3881.140 W6 1.57 11.4 40 3881.157 W6 2.07 14.9 40 3881.207 W5 2.57 18.6 40 3881.257 W4 3.07 22.3 40 3881.307 WFurther information here
6
4
Internal scaffolding access Our hatch-type access decks conform to the requirements of I 1 811, it a eparate or an integrated torey ladder for internal access.
dec u t e fitted u ing U-start ledgers ee page 8 or SpeedyScaf transoms ee page 3 a t e erection surface for the lowest ladders.
External scaffolding access lu iniu landing type tair ay it guardrail for
convenient external acce allo ing t e tran portation of aterial ee page 8
Corner deck, adjustable 6 In t e ca e of ad oining fra e ay in 73 ide caffolding, the corners are covered with corner decks. System-conforming covers are therefore no longer a problem and you have a continuous deck surface with no risks of tripping or stumbling.
Hatch-type access with offset hatch 8/9 The offset hatch can be opened and closed even when bridging decks are placed on top.
The steel plank 11 is a safe bridging element capable of bearing high loads for all scaffolding systems. It is preferred to wooden planks for use in areas with tringent fire protection re uire ent
2 Long service life, reusable 2 Lower weight compared with wood plank 2 on lip and non in a a le 2 If at least 2 steel planks are adjacent to one another,
they may also be used in brick guards
e upport lengt u t e at lea t 1 c at every support. For scaffolding decks of wood, please see our catalogue Scaffolding Accessories.
For closing of system-caused gaps, gap covers 10 or the telescopic gap deck 15 can be used.
Secure the planks with locking pins, 2 self securing steel bolts or 1 securing screw for each end.
Further information here
EN_Katalog_Blitz_2015.indd 16 09.03.2015 13:23:53
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
17
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Access decks, steel planks, gap decks Pos. Description up to load cla DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 U-Xtra-N deck, 0.61 m wide, with integrated access ladder
ec urface of gla fi re reinforced pla tic, aluminium access hatch
3 7 x 61 25.4 40 3869.2573 3 7 x 61 29.5 40 3869.307
2 U-aluminium hatch-type access deck,0.61 m wide, with integrated access laddereasy access with aluminium deck surfaceand aluminium access hatch
3 7 x 61 24.0 40 3852.2573 3 7 x 61 28.0 40 3852.307
4 3 3 U-robust hatch-type access deck, 0.61 m wide, with integrated access ladder
3 7 x 61 24.0 40 3838.2573 3 7 x 61 27.4 40 3838.307
4 U-aluminium access deck, 0.61 m wideeasy access with aluminium deck surfaceand aluminium access hatch
3 1 7 x 61 15.1 40 3851.157 W3 7 x 61 17.0 40 3851.2073 7 x 61 20.0 40 3851.2573 3 7 x 61 24.5 40 3851.307
5 6 5 U-hatch-type steel access deck, 0.64 m widealuminium access hatch
4 7 x 6 28.9 30 3813.207 W4 7 x 6 38.0 30 3813.257 W
6 Corner deck, adjustablefor angles from 45° – 90°, with toe boardin steelin aluminium
3 0.61 21.5 50 3819.000 W3 0.61 14.4 25 3826.000 P
8 7a + b 7a Access ladder T15, steel, 7 rungs B for llround Scaffolding Sy te and SpeedyScaf Sy te
1 x 3 7.6 70 4008.007
7b Access ladder, steel, 7 rungs for SpeedyScaf System
1 x 3 7.8 70 4005.007
8 U-robust hatch-type access, 0.61 m, hatch offsetwithout ladder. For use with 4005.007
3 1 7 x 61 14.2 40 3858.157 W3 7 x 61 17.2 40 3858.207 W
9 U-robust hatch-type access, 0.61 m, hatch offset, with integrated access ladder
3 7 x 61 25.2 40 3859.257 W3 3 7 x 61 28.4 40 3859.307 W
9 10 10 Steel-gap cover, 0.32 m wide Construction height only 10 mm
e up to load cla 6 it axi iu gap idt of c
6 73 x 3 2.6 150 3881.000 W6 1 x 3 4.0 150 3881.001 W6 1 7 x 3 6.0 100 3881.002 W6 7 x 3 8.0 100 3881.003 W6 7 x 3 10.0 100 3881.004 W6 3 7 x 3 10.7 100 3881.005 W
11 11 Steel plank, 0.30 msystem-free, completely made of hot-dip galvanized steel
6 1 x 3 6.5 60 3880.100 W6 1 x 3 10.3 60 3880.150 W5 x 3 12.8 60 3880.200 W3 x 3 15.3 60 3880.250 W
12 14a + b Steel plank, 0.20 mconstructed as 3880
6 1 x 4.8 100 3878.100 W6 1 x 7.2 100 3878.150 W5 x 9.5 100 3878.200 W3 x 11.8 100 3878.250 W
13 12 Locking pin, plastic, dia. 11 mm 0.08 1.0 100 v 3800.006
13 Steel bolt, self-securing, dia 11 x 7 0.08 4.5 50 v 3800.007 W
15 14a Securing screw, long, steel hot-dip galvanized 19 WS 8 x 3 4.0 50 v 3800.009 W22 WS 8 x 3 3.9 50 v 3800.010 W
14b Securing screw, short, steel hot-dip galvanized B 19 WS x 2.3 50 v 3800.011 W22 WS x 2.3 50 v 3800.012 W
15 Telescopic U-gap deck z closes gaps between 40 and 255 mm
6 0.73 5.2 40 3881.073 W6 1.09 7.8 40 3881.109 W6 1.40 10.1 40 3881.140 W6 1.57 11.4 40 3881.157 W6 2.07 14.9 40 3881.207 W5 2.57 18.6 40 3881.257 W4 3.07 22.3 40 3881.307 W
IND
IND
IND
IND
IND
IND
IND
EN_Katalog_Blitz_2015.indd 17 09.03.2015 13:23:53
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
18
Side protection
Side protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Single guardrailsteel
0.73 1.6 50 1724.0731.09 2.0 50 1724.1091.57 2.9 140 1725.1572.07 3.8 140 1725.2072.57 4.7 140 1725.2573.07 5.6 140 1725.307
2 2 Double guardrailsteel
1 7 x 7.9 70 1728.1577 x 9.8 70 1728.2077 x 11.7 70 1728.257
3 7 x 14.1 70 1728.3071 x 21.0 70 1728.414
3 3 Double guardrailaluminium
1 7 x 3.5 50 1732.1577 x 4.6 50 1732.2077 x 5.8 50 1732.257
3 7 x 6.7 50 1732.307
4 4 Single end guardrail, 0.73 m 0.73 2.2 200 1725.073
5 5 Single end guardrail, 1.09 m 1.09 3.5 250 1725.109 W
6 6 Double end guardrail, 0.73 m 19 WS 0.73 4.4 100 1728.71922 WS 0.73 4.4 100 1728.722
7 7 Double end guardrail, 1.09 m 19 WS 1.09 5.6 120 1728.11922 WS 1.09 5.6 120 1728.122
8 8 Guardrail, adjustable zd u t ent range 1 7 7
6.9 50 1726.000 W
9 10 9 Guardrail box for Euro frame 0.5 450 1735.100
10 Speedy Internal guardrail fixing device without toe board pin z 1.00 3.1 160 1716.300
Speedy Internal guardrail fixing device with toe board pin z 1.00 3.3 160 1716.301 W
11 11 Guardrail coupler with box 1.3 25 1735.000
You can choose between single 1 and double guard rails 2/3 in steel or double guardrails in aluminium.
ll guardrail are dropped into t e guardrail edge housings of the assembly frames and engaged on the wedge with a hammer blow to provide a positive and stable connection.
The end guardrails 4/5 are wedged to the vertical tube with the half-coupler.
The double end guardrails 6/7 are wedged to the guardrail oxe
The adjustable guardrail 8 is suitable for inner and outer corner and for non y te ay pivoted guardrail connecting lug is provided.
Internal guardrail fixing device 9uic fixing of internal guardrail al o on older a e ly
fra e y edging t e profile to t e a e ly fra e standard.
Guardrail box for Euro frame 10Speedy fitting of internal guardrail to t e uro a e ly fra e uardrail oxe are attac ed i ply y in erting and then turning them.
Guardrail coupler 11For connecting guardrails outside the standard di en ion , and al o for fitting all ide guardrail to older assembly frames.
EN_Katalog_Blitz_2015.indd 18 09.03.2015 13:23:58
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
19
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Side protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Single guardrailsteel
0.73 1.6 50 1724.0731.09 2.0 50 1724.1091.57 2.9 140 1725.1572.07 3.8 140 1725.2072.57 4.7 140 1725.2573.07 5.6 140 1725.307
2 2 Double guardrailsteel
1 7 x 7.9 70 1728.1577 x 9.8 70 1728.2077 x 11.7 70 1728.257
3 7 x 14.1 70 1728.3071 x 21.0 70 1728.414
3 3 Double guardrailaluminium
1 7 x 3.5 50 1732.1577 x 4.6 50 1732.2077 x 5.8 50 1732.257
3 7 x 6.7 50 1732.307
4 4 Single end guardrail, 0.73 m 0.73 2.2 200 1725.073
5 5 Single end guardrail, 1.09 m 1.09 3.5 250 1725.109 W
6 6 Double end guardrail, 0.73 m 19 WS 0.73 4.4 100 1728.71922 WS 0.73 4.4 100 1728.722
7 7 Double end guardrail, 1.09 m 19 WS 1.09 5.6 120 1728.11922 WS 1.09 5.6 120 1728.122
8 8 Guardrail, adjustable zd u t ent range 1 7 7
6.9 50 1726.000 W
9 10 9 Guardrail box for Euro frame 0.5 450 1735.100
10 Speedy Internal guardrail fixing device without toe board pin z 1.00 3.1 160 1716.300
Speedy Internal guardrail fixing device with toe board pin z 1.00 3.3 160 1716.301 W
11 11 Guardrail coupler with box 1.3 25 1735.000
IND
EN_Katalog_Blitz_2015.indd 19 09.03.2015 13:23:58
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
20
Side protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Toe boardfor longitudinal side
73 x 1 1.6 140 1756.0731 x 1 2.4 140 1756.1091 7 x 1 3.1 140 1757.157
7 x 1 4.7 140 1757.2077 x 1 5.6 140 1757.257
3 7 x 1 6.8 140 1757.3071 x 1 10.3 140 1757.414
2 2 End toe boardfor end side
73 x 1 1.8 250 1757.0731 x 1 2.3 140 1757.109 W
3 3 Half-coupler with toe board pin 19 WS 1.0 25 4708.01922 WS 1.0 25 4708.022
Side protection
Toe boards 1 a y fitting into t e toe oard pin , for co plete
three-part side protection. Wood, reddish-brown in colour.
Individual toe boards 3 The toe boards can be individually designed in printing and painting.
Half-coupler with toe board pin 4 Toe board connection to inner corners and SpeedyScaf rolling to er , for exa ple
Diagonal bracing Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
5 5 Diagonal brace with wedge half-couplerfor 2.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 2.00 m bay heightfor 3.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 1.50 m bay height
2.80 7.0 50 1736.2073.20 7.8 50 1736.2573.60 8.3 50 1736.3072.97 7.3 50 1737.257 W
6 6 Diagonal brace with 2 half-couplersfor 1.57 m bay length, 2.00 m bay height
19 WS 2.20 6.5 50 1736.157
7 7 Base ledger with 2 wedge half-couplersfor 2.07 m bay lengthfor 2.57 m bay lengthfor 3.07 m bay length
2.07 6.9 50 1727.2072.57 8.6 50 1727.2573.07 10.4 50 1727.307
8 8 Section brace with 2 half-couplersfor supporting the bracket 0.73 mand in assembly frame 0.73 m
19 WS 1.80 6.0 50 1740.17722 WS 1.80 6.0 50 1741.177
for supporting the bracket 1.09 mand in assembly frame 1.09 m
19 WS 1.90 6.4 50 1740.195 22 WS 1.90 6.4 50 1741.195
Diagonal bracing
When the cover of the wedge half-coupler is directly underneath the hole marking, the scaffolding bay is vertically aligned.
Diagonal braces 5for vertically bracing the scaffolding parallel and vertical to the façade, tube diamtetre 42.40 mm.
iagonal guidance for regular a e ly i pecified in t e approval notification e diagonal race are inserted into the corner plate at the top end of the assembly frame. Wedged to the lower diagonal point with the approved wedge half-coupler, they provide an absolutely positive and stable bracing with easy correctability during assembly.
The horizontal strut must be installed in the foot area of the diagonal bay.
8 8
5
7
EN_Katalog_Blitz_2015.indd 20 09.03.2015 13:24:01
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
21
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Side protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Toe boardfor longitudinal side
73 x 1 1.6 140 1756.0731 x 1 2.4 140 1756.1091 7 x 1 3.1 140 1757.157
7 x 1 4.7 140 1757.2077 x 1 5.6 140 1757.257
3 7 x 1 6.8 140 1757.3071 x 1 10.3 140 1757.414
2 2 End toe boardfor end side
73 x 1 1.8 250 1757.0731 x 1 2.3 140 1757.109 W
3 3 Half-coupler with toe board pin 19 WS 1.0 25 4708.01922 WS 1.0 25 4708.022
Diagonal bracing Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
5 5 Diagonal brace with wedge half-couplerfor 2.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 2.00 m bay heightfor 3.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 1.50 m bay height
2.80 7.0 50 1736.2073.20 7.8 50 1736.2573.60 8.3 50 1736.3072.97 7.3 50 1737.257 W
6 6 Diagonal brace with 2 half-couplersfor 1.57 m bay length, 2.00 m bay height
19 WS 2.20 6.5 50 1736.157
7 7 Base ledger with 2 wedge half-couplersfor 2.07 m bay lengthfor 2.57 m bay lengthfor 3.07 m bay length
2.07 6.9 50 1727.2072.57 8.6 50 1727.2573.07 10.4 50 1727.307
8 8 Section brace with 2 half-couplersfor supporting the bracket 0.73 mand in assembly frame 0.73 m
19 WS 1.80 6.0 50 1740.17722 WS 1.80 6.0 50 1741.177
for supporting the bracket 1.09 mand in assembly frame 1.09 m
19 WS 1.90 6.4 50 1740.195 22 WS 1.90 6.4 50 1741.195
IND
IND
IND
EN_Katalog_Blitz_2015.indd 21 09.03.2015 13:24:01
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
22
Brackets
Brackets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 Console bracket, 0.22 mwithout spigotwith integrated lift-off preventer
19 WS 0.22 2.8 100 1744.01922 WS 0.22 2.8 100 1744.022
4 3 2 Console bracket, 0.36 mwithout spigotwith integrated lift-off preventer
19 WS 0.36 3.3 125 1743.31922 WS 0.36 3.3 125 1743.322
3 Console bracket, 0.36 m with integrated lift-off preventer
19 WS 0.36 3.5 125 1745.31922 WS 0.36 3.5 125 1745.322
5 6 4 Plug-in console bracket, 0.22 mwithout spigot
0.22 1.3 250 1746.022
5 Plug-in console bracket, 0.36 mwithout spigot
0.36 1.6 250 1746.036
8 7 6 Console bracket, 0.50 m 19 WS 0.50 5.8 130 1744.51922 WS 0.50 5.8 130 1744.522
7 Console bracket, 0.73 m 19 WS 0.73 6.4 100 1744.71922 WS 0.73 6.4 100 1744.722
9 10 8 Console bracket, 0.73 m, swivelling 0.73 7.0 80 1744.073 W
9 Console bracket, 0.73 m, reinforced 19 WS 0.73 8.8 40 1745.71922 WS 0.73 8.8 40 1745.722
10 Console bracket, 1.09 m 19 WS 1.09 9.6 30 1745.11922 WS 1.09 9.6 30 1745.122
1111 Lock against lift-off
for bracket 0.36 m widefor bracket 0.50 m widefor bracket 0.73 m widefor bracket 1.09 m wide
0.36 0.9 250 1743.036 W0.50 1.3 250 1743.050 W0.73 1.5 250 1743.0731.09 2.3 50 1743.109 W
12 12 Section brace with 2 half-couplersfor supporting the bracket 0.73 m 19 WS 1.80 6.0 50 1740.177
22 WS 1.80 6.0 50 1741.177
for supporting the bracket 1.09 m 19 WS 1.90 6.4 50 1740.19522 WS 1.90 6.4 50 1741.195
The console bracket, 0.22 m for decks,
1
The Console bracket, 0.36 m for decks,
3
SpeedyScaf can be quickly widened inwards or outwards: the console brackets are secured with the welded-on half-coupler in the corner plate of the assembly frame to form a deck level with the main scaffolding.
The plug-in console bracket 0.22 m 4 and 0.36 m 5 is u ed for uic odification ile uilding con truction,
en external t er al in ulation co pound y te ill e fitted to t e fa ade u t e re uired axi u
distance between scaffolding and façade is ensured any ti e, it out u ing internal guardrail It i only fitted into the locking pin hole. There’s no need for alignment or screwing. The plug-in console bracket cannot be used in combination with roof guard supports.
The console bracket, 0.50 m 6 is used to lengthen or shorten scaffolding bays. When used for widening on the 0.73 m assembly frame, two decks, 0.61 m can be installed without gaps.
The console bracket, 0.73 m 7 may only be installed with a bracket support (section brace) 12.
The console bracket, 0.73 m, swivelling 8 is placed on the spigot of the assembly frame and can be swung clear after re oval of t e dec furt er advantage i its use for corner solutions, since a 0.73 m bracket can
e fitted at t e a e eig t It ay al o only e u ed with a bracket support.
The console bracket, 0.73 m, reinforced 9 can be used in SpeedyScaf 7 in teel up to 3 7 ay lengt (up to load class 3) and in brick guards. In this case, it is possible to dispense with the bracket support with SpeedyScaf 70 in steel. The advantages of the console bracket, 0.73 m, reinforced 9:2 o need for ection race2 Less material needed2 Lower overall costs2 Coupler connection to frame possible at bracket level
The console bracket, 1.09 m 10 may only be installed with a bracket support (section brace) 12.
Bracket decks too must be secured against inadvertent lifting off, therefore either the single guardrail support or the lock against lift-off 11 is essential. The lift-off preventer is secured by means of locking pins.
10
EN_Katalog_Blitz_2015.indd 22 09.03.2015 13:24:05
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
23
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Brackets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 Console bracket, 0.22 mwithout spigotwith integrated lift-off preventer
19 WS 0.22 2.8 100 1744.01922 WS 0.22 2.8 100 1744.022
4 3 2 Console bracket, 0.36 mwithout spigotwith integrated lift-off preventer
19 WS 0.36 3.3 125 1743.31922 WS 0.36 3.3 125 1743.322
3 Console bracket, 0.36 m with integrated lift-off preventer
19 WS 0.36 3.5 125 1745.31922 WS 0.36 3.5 125 1745.322
5 6 4 Plug-in console bracket, 0.22 mwithout spigot
0.22 1.3 250 1746.022
5 Plug-in console bracket, 0.36 mwithout spigot
0.36 1.6 250 1746.036
8 7 6 Console bracket, 0.50 m 19 WS 0.50 5.8 130 1744.51922 WS 0.50 5.8 130 1744.522
7 Console bracket, 0.73 m 19 WS 0.73 6.4 100 1744.71922 WS 0.73 6.4 100 1744.722
9 10 8 Console bracket, 0.73 m, swivelling 0.73 7.0 80 1744.073 W
9 Console bracket, 0.73 m, reinforced 19 WS 0.73 8.8 40 1745.71922 WS 0.73 8.8 40 1745.722
10 Console bracket, 1.09 m 19 WS 1.09 9.6 30 1745.11922 WS 1.09 9.6 30 1745.122
1111 Lock against lift-off
for bracket 0.36 m widefor bracket 0.50 m widefor bracket 0.73 m widefor bracket 1.09 m wide
0.36 0.9 250 1743.036 W0.50 1.3 250 1743.050 W0.73 1.5 250 1743.0731.09 2.3 50 1743.109 W
12 12 Section brace with 2 half-couplersfor supporting the bracket 0.73 m 19 WS 1.80 6.0 50 1740.177
22 WS 1.80 6.0 50 1741.177
for supporting the bracket 1.09 m 19 WS 1.90 6.4 50 1740.19522 WS 1.90 6.4 50 1741.195
IND
e axi u a e ly eig t on brackets is dependent on the decks, bay lengths and assembly frames used. The appropriate structural trengt pecification u t e
observed. Further information can be found in our SpeedyScaf Technical Brochure page 27.
EN_Katalog_Blitz_2015.indd 23 09.03.2015 13:24:06
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
24
Anchoring
Anchoring Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 SpeedyScaf wall tie 0.69 2.8 100 1755.069
2 2 Wall tie 0.38 1.6 250 1754.0380.95 3.7 50 1754.0951.45 5.7 50 1754.1451.75 5.8 50 1754.175
3 4 5 3 Gusset coupler 19 WS 0.9 25 1735.01922 WS 0.9 25 1735.022
7 4 Plastic wall insert, plasticdrilled hole dia. 14 mm
7 0.3 25 v 4008.071100 mm 0.3 25 v 4008.101135 mm 0.3 25 v 4008.136
5 Ring screw, steel, galvanized,dia 1 , for expanding plug
1.6 10 v 4009.096120 mm 1.8 10 v 4009.121190 mm 2.5 10 v 4009.191230 mm 3.0 10 v 4009.231300 mm 3.5 10 v 4009.301350 mm 5.0 10 v 4009.351
6 Cap, 12 mm, white,for expanding plug ef o 8
12 mm 1.0 100 v 4007.006
7 Telescopic stabilizer, steel, 3.30 – 6.00 m z 3.30 28.4 20 4032.600
8 Peg solid, dia. 24 mm 470 mm 1.8 4032.100
6 9 9 Peg extraction device 8.0 4032.200 W
10 ETICS-tie 600 complete, up to approx in ulationETICS-tie 800 complete, up to approx 3 in ulationco pri ing ite , 1 x , 11 x and 1 x
0.68 5.5 120 4000.6000.88 6.9 120 4000.800
11 ETICS-tie 600ETICS-tie 800
0.68 2.5 4000.200 W0.88 3.3 4000.300 W8
10 12 ETICS hanger bolt, 1 x 1 125 mm 2.0 25 V 4000.126
13 ETICS-tie rod 380, up to approx in ulationETICS-tie rod 480, up to approx 3 in ulation
0.38 10.0 10 V 4000.121 W0.48 13.0 10 V 4000.481 W
14 Plastic pipe, 50 m 5.0 4000.050 W
15 Cap for plastic pipe 0.5 50 V 4000.103 W
16 Lock nut, S 36 x 3 4.0 20 V 2671.131 W
17 Open ended wrench, WS 36 0.5 2671.135 W
11
17 15
16
14
12
13
SpeedyScaf wall tie with double coupler
2 wall ties connected in a
ape it one double coupler each to the inner standard.
The scaffolding must be anchored vertically to and parallel with the façade with resistance to both tensile and compressive stress. Layher offers speedy and safe solutions:
2 The SpeedyScaf wall tie 1, which is fastened with a double coupler in the corner plate of the assembly frame and is supported with the fork plate on the channel section of the assembly frame.
2 The wall tie 2, which is connected with two double or corner plate couplers to both upright tubes.
2 SpeedyScaf corner plate coupler 3 For outside and inside brackets too, continuous anchoring directly on the corner plate of the Euro assembly frame is possible and ensures a greater height clearance.
The anchoring forces in accordance with the approval or individual verification of tructural trengt can vary widely. The loading capacity of the anchoring, in particular of the anchoring foundation, must be carefully c ec ed and verified ee in truction for a e ly and use).
For double couplers see page 36. For insert testing instrument see catalogue scaffolding accessories.
The ETICS-tie is constructed for carrying high loads, parallel to t e fa ade, in u e toget er it external thermal insulation compound systems.
Wall tie with two plate couplers
Allround ledger as wall tie with two corner plate couplers
EN_Katalog_Blitz_2015.indd 24 09.03.2015 13:24:13
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
25
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Anchoring Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 SpeedyScaf wall tie 0.69 2.8 100 1755.069
2 2 Wall tie 0.38 1.6 250 1754.0380.95 3.7 50 1754.0951.45 5.7 50 1754.1451.75 5.8 50 1754.175
3 4 5 3 Gusset coupler 19 WS 0.9 25 1735.01922 WS 0.9 25 1735.022
7 4 Plastic wall insert, plasticdrilled hole dia. 14 mm
7 0.3 25 v 4008.071100 mm 0.3 25 v 4008.101135 mm 0.3 25 v 4008.136
5 Ring screw, steel, galvanized,dia 1 , for expanding plug
1.6 10 v 4009.096120 mm 1.8 10 v 4009.121190 mm 2.5 10 v 4009.191230 mm 3.0 10 v 4009.231300 mm 3.5 10 v 4009.301350 mm 5.0 10 v 4009.351
6 Cap, 12 mm, white,for expanding plug ef o 8
12 mm 1.0 100 v 4007.006
7 Telescopic stabilizer, steel, 3.30 – 6.00 m z 3.30 28.4 20 4032.600
8 Peg solid, dia. 24 mm 470 mm 1.8 4032.100
6 9 9 Peg extraction device 8.0 4032.200 W
10 ETICS-tie 600 complete, up to approx in ulationETICS-tie 800 complete, up to approx 3 in ulationco pri ing ite , 1 x , 11 x and 1 x
0.68 5.5 120 4000.6000.88 6.9 120 4000.800
11 ETICS-tie 600ETICS-tie 800
0.68 2.5 4000.200 W0.88 3.3 4000.300 W8
10 12 ETICS hanger bolt, 1 x 1 125 mm 2.0 25 V 4000.126
13 ETICS-tie rod 380, up to approx in ulationETICS-tie rod 480, up to approx 3 in ulation
0.38 10.0 10 V 4000.121 W0.48 13.0 10 V 4000.481 W
14 Plastic pipe, 50 m 5.0 4000.050 W
15 Cap for plastic pipe 0.5 50 V 4000.103 W
16 Lock nut, S 36 x 3 4.0 20 V 2671.131 W
17 Open ended wrench, WS 36 0.5 2671.135 W
IND
EN_Katalog_Blitz_2015.indd 25 09.03.2015 13:24:13
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
26
Standard brick guard, pedestrian protection, guardrail closure
Standard brick guard, pedestrian protection, guardrail closure Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 SpeedyScaf roof guard support, 0.36 / 0.50 / 0.73 m(used on assembly frame 0.73 m and brackets 0.36 m, 0.50 m, and 0.73 m)
x 73 12.1 20 1748.000
SpeedyScaf roof guard support, 1.09 m(used on assembly frame 1.09 m)
x 1 13.6 20 1778.109 W
2 SpeedyScaf roof guard 1 x 1 7 15.5 1749.157 P1 x 7 17.7 1749.207 P1 x 7 21.1 30 1749.257 W1 x 3 7 24.4 30 1749.307 W
3 4 5 3 Protection netwithout quick belt
1 x 4.5 100 6232.000
4 Protection netwith quick belt
1 x 5.9 100 6232.002
5 Quick belt 0.50 1.5 50 v 6235.001
6 6 Fan support 2.10 18.9 20 1773.019 W
7 8 7 For the scaffolding bay Euro intermediate frame, 0.73 m, steelEuro intermediate frame, 0.73 m, aluminium, without spigot
1 x 73 6.5 50 1719.0731 x 73 2.7 50 1769.073
8 Euro intermediate frame, 1.09 m, steel 1 x 1 8.5 50 1719.109 W
10 9 9 For the end sideEuro top end frame, 0.73 m, steelEuro top end frame, 0.73 m, aluminium, without spigot
1 x 73 13.3 50 1722.0731 x 73 4.6 25 1770.073
10 Euro top end frame, 1.09 m, steel 1 x 1 14.9 50 1722.109 W
11 11 Euro guardrail post, single, with guardrail wedge head housing, for bracket 0.36 m wide in steelin aluminium
1.00 5.5 100 1716.0001.00 2.4 100 1768.000
Two brick guards must be dropped into the brick guard support for each bay.
Roofer’s guard systeme eig tened ide protection pecified for roofing or
is swiftly assembled in SpeedyScaf scaffolding: at the top level, attach the brick guard support 1 instead of a guardrail support, drop in two brick guards for each bay (locking element determines how they are installed), knock in wedges, insert toe boards and locking pins – done!
Euro assembly frames are used to close off roofer’s guard system levels at the ends.
1242900
Guardrail closure, topEuro intermediate frames 7/8 with welded-on wedge housings secure the top work deck. Guardrails are dropped in and wedged as on the assembly frame.
The Euro top end frames 9/10 for securing the scaffolding end sides are already provided using end guardrail nly t e toe oard till a to e fitted
lternatively, it i po i le to u e 1 ig a e ly frames with guardrail wedge housings on the end side.
n end guardrail acting a a nee rail i al o re uired here. For fastening reasons, only double guard rails can then be installed on the longitudinal side. One guardrail lug of the hand rail is inserted into the channel section of the assembly frame on the end side. The other three guardrail lugs are wedged as usual.Securing of the top scaffolding level with locking pins i reco ended ee page 3
The Euro guardrail post is used for 0.36 m brackets. The guardrail is closed at the end sides
it tu e and coupler n end toe oard u t e fitted y t e customer.
Fan support 6Protection against falling objects. The surfaces must be covered with system decks. Two decks 0.61 m wide are dropped in horizontally, and one deck 0.61 m and one deck 0.32 m at an angle.
Side protection net 3The nets are attached at the bottom (at scaffolding deckheight) and at the top (2 m above the scaffolding deck)to a tube.
Without a quick strap fastener, the protectionnet is threaded with each loop of its mesh into the tubes.With quick strap fasteners, the protection net is attachedto t e tu e at every 7 toe oard and a andrailare required in any event.
rotection net 1 x , pecificationMesh width 100 mm, blue, made of PPM 4.50 mm,notle , a per I 1 63 1, type
EN_Katalog_Blitz_2015.indd 26 09.03.2015 13:24:18
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
27
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Standard brick guard, pedestrian protection, guardrail closure Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 1 SpeedyScaf roof guard support, 0.36/0.50/0.73 m(used on assembly frame 0.73 m and brackets 0.36 m, 0.50 m, and 0.73 m)
2.00 x 0.73 12.1 20 1748.000
SpeedyScaf roof guard support, 1.09 m(used on assembly frame 1.09 m)
2.00 x 1.09 13.6 20 1778.109 W
2 SpeedyScaf roof guard 1.00 x 1.57 15.5 1749.157 P1.00 x 2.07 17.7 1749.207 P1.00 x 2.57 21.1 30 1749.257 W1.00 x 3.07 24.4 30 1749.307 W
3 4 5 3 Protection netwithout quick belt
10.00 x 2.00 4.5 100 6232.000
4 Protection netwith quick belt
10.00 x 2.00 5.9 100 6232.002
5 Quick belt 0.50 1.5 50 v 6235.001
6 6 Fan support 2.10 18.9 20 1773.019 W
7 8 7 For the scaffolding bay Euro intermediate frame, 0.73 m, steelEuro intermediate frame, 0.73 m, aluminium, without spigot
1.00 x 0.73 6.5 50 1719.0731.00 x 0.73 2.7 50 1769.073
8 Euro intermediate frame, 1.09 m, steel 1.00 x 1.09 8.5 50 1719.109 W
10 9 9 For the end sideEuro top end frame, 0.73 m, steelEuro top end frame, 0.73 m, aluminium, without spigot
1.00 x 0.73 13.3 50 1722.0731.00 x 0.73 4.6 25 1770.073
10 Euro top end frame, 1.09 m, steel 1.00 x 1.09 14.9 50 1722.109 W
11 11 Euro guardrail post, single, with guardrail wedge head housing, for bracket 0.36 m wide in steelin aluminium
1.00 5.5 100 1716.0001.00 2.4 100 1768.000
IND
EN_Katalog_Blitz_2015.indd 27 09.03.2015 14:40:15
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
28
Stairway access
Modular stairway Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
11 12 13 11 Stair foot section, 0.60 mStair foot section, 0.95 m
0.60 6.8 15 2639.0600.95 7.8 50 2639.095 W
12 Stair middle section, 0.60 mStair middle section, 0.95 m
0.60 9.2 15 2638.0600.95 10.2 50 2638.095 W
13 Stair head section, 0.60 mStair head section, 0.95 m
0.60 10.7 15 2637.0600.95 11.7 50 2637.095 W
Stairway access Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 3 1 U-starting stairway, 0.64 m wide, aluminium1 ig , oad earing cap Step eig t 1 ig , oad earing cap Step eig t
1 x 6 11.5 10 1753.003 W1 x 6 13.5 10 1753.002 W
2 U-platform stairway, 0.64 m wide, aluminiumoad earing cap , Stair cla acc to 1 811 1
for 2.57 m bay length, Step height 0.20 m, 2.00 m highfor 3.07 m bay length, Step height 0.20 m, 2.00 m highfor 2.57 m bay length, Step height 0.20 m, 1.50 m high
7 x 6 21.9 10 1753.2573 7 x 6 26.3 10 1753.307
7 x 6 21.5 10 1753.251 W3 U-comfort stairway, 0.64 m wide, aluminium z
oad earing cap , Stair cla acc to 1 811 1for 2.57 m bay length, Step height 0.22 m, 2.00 m highfor 3.07 m bay length, Step height 0.22 m, 2.00 m high
7 x 6 27.0 10 1755.257 W3 7 x 6 32.0 10 1755.307 W
4 5 6 4 Starter U-transom 0.73 3.8 42 1751.0731.09 5.1 42 1751.109 W
5 Stairway-guardrail postfor stairwell at the top level
19 WS 1.10 5.1 50 1752.006
6 U-distance couplerfor connecting stairway tower to the work scaffolding
19 WS 2.0 250 1752.01922 WS 2.0 250 1752.022
7 8 7 Stairwell guardrail 19 WS 6.2 40 1752.00422 WS 6.2 40 1752.014 W
8 Stair guardrailfor 2.57 m bay length, 2.00 m bay heightfor 3.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 1.50 m bay height
7 x 16.1 70 1752.2573 7 x 17.6 70 1752.307
7 x 1 14.6 70 1752.003 P
9 Internal guardrail T12for 7 x ay and 3 7 x ayfor 7 x ay and 3 7 x ayfor 7 x 1 ayMandatory for opposite-direction stairways
19 WS 2.00 13.5 20 1752.00722 WS 2.00 13.5 20 1752.008 W19 WS 1.50 11.5 20 1752.012 W
Internal guardrailfor tarting tair ay 19 WS 1.00 7.8 20 1752.011 W
10 9 10 Initial stairway guardrail 19 WS x 1 7 9.9 20 1752.009 W
Modular stairway
1753.003 1753.002
11 13
Scaffolding access, outsideThe Aluminium platform stairs 2 offers increased safety, convenience and speed when ascending the tower. Material transport is facilitated by the additional use of the work decks as allround walkways. The external landing type tair ay i covered y t e approval in it regular ver ion up to t i ean t at it a load capacity of no furt er verification i needed axi u con truction eig t depending on structural analysis.
The platform stairway tower will be connected to the work scaffolding using the U-distance coupler 6. The
1 ide gap dec ear in t e profile of t e coupler lternatively t e tair ay to er can e connected directly to work scaffolding. The gap will be closed using the telescopic gap deck (see page 16).
Starter U-transom for 4:2 Scaffolding access with platform stairs, at the entrance
for dropping into the stairway;2 Ladder access to the 0.73 m wide scaffolding,
accommodates at the lowest level of an access bay the deck that may be required for setting up the ladder.
The Comfort stairway 3 bases on the platform stairway and has reinforced stringers and step sections. The 175 mm wide grooved steps guarantee more comfort when ascending the stairs, especially for high stairway heights. Guardrails, internal guardrails and stairwell guardrail can be used from the platform stairway.
Outer landing-type stairway access (stairs in identical direction)
With the modular stairway, accesses that al ay fit and t at atc t e y te can e con tructed ny inter ediate di en ion can e ac ieved i ply y fitting toget er the individual stairway parts. The stairway ri e c fro tep to tep, and t e bottom element with spindles is used for preci e levelling ide variety of applications thanks to modular design. Little space needed for transport and assembly. Height differences from 0.60 m to 1.60 m can be bridged. Load-bearing capacity:
3 e ign teel, ot dip galvani ed onnection of ele ent it olt, dia 1 x and afety clip 8 per oint ey are already included in t e scope of delivery.
EN_Katalog_Blitz_2015.indd 28 09.03.2015 13:24:22
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
29
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Modular stairway Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
11 12 13 11 Stair foot section, 0.60 mStair foot section, 0.95 m
0.60 6.8 15 2639.0600.95 7.8 50 2639.095 W
12 Stair middle section, 0.60 mStair middle section, 0.95 m
0.60 9.2 15 2638.0600.95 10.2 50 2638.095 W
13 Stair head section, 0.60 mStair head section, 0.95 m
0.60 10.7 15 2637.0600.95 11.7 50 2637.095 W
Stairway access Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 2 3 1 U-starting stairway, 0.64 m wide, aluminium1 ig , oad earing cap Step eig t 1 ig , oad earing cap Step eig t
1 x 6 11.5 10 1753.003 W1 x 6 13.5 10 1753.002 W
2 U-platform stairway, 0.64 m wide, aluminiumoad earing cap , Stair cla acc to 1 811 1
for 2.57 m bay length, Step height 0.20 m, 2.00 m highfor 3.07 m bay length, Step height 0.20 m, 2.00 m highfor 2.57 m bay length, Step height 0.20 m, 1.50 m high
7 x 6 21.9 10 1753.2573 7 x 6 26.3 10 1753.307
7 x 6 21.5 10 1753.251 W3 U-comfort stairway, 0.64 m wide, aluminium z
oad earing cap , Stair cla acc to 1 811 1for 2.57 m bay length, Step height 0.22 m, 2.00 m highfor 3.07 m bay length, Step height 0.22 m, 2.00 m high
7 x 6 27.0 10 1755.257 W3 7 x 6 32.0 10 1755.307 W
4 5 6 4 Starter U-transom 0.73 3.8 42 1751.0731.09 5.1 42 1751.109 W
5 Stairway-guardrail postfor stairwell at the top level
19 WS 1.10 5.1 50 1752.006
6 U-distance couplerfor connecting stairway tower to the work scaffolding
19 WS 2.0 250 1752.01922 WS 2.0 250 1752.022
7 8 7 Stairwell guardrail 19 WS 6.2 40 1752.00422 WS 6.2 40 1752.014 W
8 Stair guardrailfor 2.57 m bay length, 2.00 m bay heightfor 3.07 m bay length, 2.00 m bay heightfor 2.57 m bay length, 1.50 m bay height
7 x 16.1 70 1752.2573 7 x 17.6 70 1752.307
7 x 1 14.6 70 1752.003 P
9 Internal guardrail T12for 7 x ay and 3 7 x ayfor 7 x ay and 3 7 x ayfor 7 x 1 ayMandatory for opposite-direction stairways
19 WS 2.00 13.5 20 1752.00722 WS 2.00 13.5 20 1752.008 W19 WS 1.50 11.5 20 1752.012 W
Internal guardrailfor tarting tair ay 19 WS 1.00 7.8 20 1752.011 W
10 9 10 Initial stairway guardrail 19 WS x 1 7 9.9 20 1752.009 W
LAYHER ALLROUND SCAFFOLDING SYSTEMCATALOGUE
®
Edition 04.2015Ref. No. 8116.252
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
IND
The stairway tower 500 is intended for temporary stairway structures with higher live loads. It is preferably used as a construction stairway tower, e.g. for access to the site or as a road crossing not open to the public during construction work, and furthermore at buildings as an additional e cape tair ay to er nder certain circu tance , t e tair ay to er can also be used for public access during construction work or as a mandatory escape stairway tower. U-stairway stringer 500: 2 Permissible load-bearing
capacity for a tair ig t idt of 7
These and further stairway olution you ll find in t e
Catalogue AllroundScaffolding – for size and public applications.
2 Stair ay di en ion i er , c read a 7, c ndercut u , c
EN_Katalog_Blitz_2015.indd 29 09.03.2015 13:24:24
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
30
System lattice beam
System lattice beam Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 SpeedyScaf lattice beam LW, steel1 x 7 ay
6 1 x 3 7 ay7 71 3 x 7 ay
1 x 46.4 20 1781.5146 1 x 53.9 20 1781.6147 71 x 67.2 20 1781.771
SpeedyScaf lattice beam, aluminium1 x 7 ay
6 1 x 3 7 ay1 x 22.5 50 1767.514 W
6 1 x 26.4 50 1767.614 W
2 2 Lattice beam couplerfor SpeedyScaf lattice beam
19 WS 1.6 25 4720.01922 WS 1.6 25 4720.022
3a+b 3 U-ledger for lattice beam for accommodating scaffolding decks when bridging with SpeedyScaf lattice beamsa) 0.73 mb) 1.09 m
0.73 3.1 42 4923.0731.09 4.3 42 4923.109 W
4 4 Intermediate transom for lattice beam, 0.73 mincl. 4 bolts, for lattice beams 4912 and 4922
6.5 50 4924.073
5 5 Steel lattice beam 450, 45 cm high, system free2.00 m long3.00 m long, with type approval4.00 m long, with type approval5.00 m long, with type approval6.00 m long, with type approval
x 20.7 40 4912.2003 x 29.6 40 4922.300
x 40.5 40 4922.400 x 49.3 40 4922.500
6 x 58.2 40 4922.600
Steel lattice beam, system free 5with type calculation:2 Permissible spans ranging from 3 m to 12 m2 ifferent type of upport and load2 ll value in ta le for , ence no need for
tructural trengt verification for t e lattice ea2 Calculation reliability.
urt er lattice ea you ll find in t e catalogue Scaffolding Accessories.
Assembly frames for special applications Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
6 7 6 Gantry frame LW steel, hot-dip galvanized
x 1 31.2 24 1779.150
7 Guardrail wedge housing coverPolypropylene
0.6 10 V 1710.003 W
8 Euro assembly frame, 2.00 x 0.36 m steel, hot-dip galvanized
x 36 18.3 50 1717.200
9 Euro assembly frame, 2.00 m, for balustrade steel, hot-dip galvanized
x 73 22.7 25 1718.200
8 9 10 Euro eaves bracket, 1.00 m steel, hot-dip galvanized
1 x 73 14.8 50 1718.100
10
Assembly frames for special applications
1500
2200
The gantry frame LW 6 for safe protection of pedestrians underneath the scaffolding, by rebolting the central pigot for 73 or 1 caffolding idt
The Euro assembly frame, 2.00 x 0.36 m 8 for assembly in narrow areas, e.g. between house walls, where a normal assembly frame is too wide. Possibilities for connection of locking wedge housings to both side rails.
The Euro assembly frame, 2.00 m, for balustrade 9is used where a roof projection projects into the caffolding ove it, a axi u of four furt er level
can be constructed using standard assembly frames.
The Euro eaves bracket, 1.00 m 10 meets workplace requirements for painters, plasterers, plumbers and roofers. It obviates the need for structures requiring much time and material. The deck in the main scaffolding must
e ecured u ing t e lift off preventer ef o 17 3 e toe board can be suspended in the eaves bracket.
Outside 450
dia. 48.30
xi
e of t e lattice beam coupler
For accommodating scaffolding decks when bridging with SpeedyScaf lattice beams
4When placed on non-system lattice beams for bridging, it is also possible to continue construction in the standard system dimensions with 0.73 m wide assembly frames.
SpeedyScaf lattice beam LW 1The top chord with engagement lugs at both ends and spigots for further con struction in the standard dimension is dropped into the spigots of the assembly frame, while the bottom chord must be connected with lattice beam couplers 2 to the upright tube. The use of the SpeedyScaf lattice ea i governed y t e approval notification, which must be complied with. If the aluminium SpeedyScaf lattice beam is used, bear in mind the reduced load-bearing capacitie or ridging of up to 1 di tance it teel or aluminium decks in the standard SpeedyScaf assembly.
xa ple SpeedyScaf lattice ea 1 , covered scaffolding (special diagonal guidance)
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
EN_Katalog_Blitz_2015.indd 30 09.03.2015 13:24:28
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
31
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
System lattice beam Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 SpeedyScaf lattice beam LW, steel1 x 7 ay
6 1 x 3 7 ay7 71 3 x 7 ay
1 x 46.4 20 1781.5146 1 x 53.9 20 1781.6147 71 x 67.2 20 1781.771
SpeedyScaf lattice beam, aluminium1 x 7 ay
6 1 x 3 7 ay1 x 22.5 50 1767.514 W
6 1 x 26.4 50 1767.614 W
2 2 Lattice beam couplerfor SpeedyScaf lattice beam
19 WS 1.6 25 4720.01922 WS 1.6 25 4720.022
3a+b 3 U-ledger for lattice beam for accommodating scaffolding decks when bridging with SpeedyScaf lattice beamsa) 0.73 mb) 1.09 m
0.73 3.1 42 4923.0731.09 4.3 42 4923.109 W
4 4 Intermediate transom for lattice beam, 0.73 mincl. 4 bolts, for lattice beams 4912 and 4922
6.5 50 4924.073
5 5 Steel lattice beam 450, 45 cm high, system free2.00 m long3.00 m long, with type approval4.00 m long, with type approval5.00 m long, with type approval6.00 m long, with type approval
x 20.7 40 4912.2003 x 29.6 40 4922.300
x 40.5 40 4922.400 x 49.3 40 4922.500
6 x 58.2 40 4922.600
Assembly frames for special applications Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
6 7 6 Gantry frame LW steel, hot-dip galvanized
x 1 31.2 24 1779.150
7 Guardrail wedge housing coverPolypropylene
0.6 10 V 1710.003 W
8 Euro assembly frame, 2.00 x 0.36 m steel, hot-dip galvanized
x 36 18.3 50 1717.200
9 Euro assembly frame, 2.00 m, for balustrade steel, hot-dip galvanized
x 73 22.7 25 1718.200
8 9 10 Euro eaves bracket, 1.00 m steel, hot-dip galvanized
1 x 73 14.8 50 1718.100
1010
If further construction is planned on Euro assembly frame 2.00 x 0.36 m with Euro assembly frame 0.73 m, a bracket 0.36 m
u t e connected e ly fra e 73 can then be fitted without a lower cross rung.
IND
LAYHER
L IG H T W EIG HT
LAYHER
L IG H T W EIG HT
EN_Katalog_Blitz_2015.indd 31 09.03.2015 13:24:29
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
32
Accessories
Accessories Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Intermediate transom, 0.73 mwith half-coupler, for intermediate layers 19 WS 0.73 3.9 100 1742.719
22 WS 0.73 4.0 100 1742.7222 2 Intermediate transom, 1.09 m
with half-coupler, for intermediate layers 19 WS 1.09 5.1 250 1742.119 W22 WS 1.09 5.1 250 1742.122 W
3 3 Aluminium bridging ledger, 2.57 mAluminium bridging ledger, 3.07 mfor mounting on spigot,for reduction of bay length.
2.57 8.5 90 1775.257 W3.07 9.7 90 1775.307 W
4 4 Spigotincl. 2 boltsfor furt er con truction on alu iniu ridging ledger ef o 177
0.20 1.8 250 1775.000 W
5 5 Reducer from 1.09 m to 0.73 mwith welded-on channel section
1.09 8.3 20 4027.000 W
6 6 Locking pin, red, dia. 11 mm 0.2 100 4000.001
7 7 Castor 700Plastic wheel, dia. 200 mm. With base plate, adjustment range 0.30 – 0.60 m, spindle nut with lock, castor with twinbrake lever and load centering when braked. Wheel and slewing ring can be locked.
er i i le load 7
dia. 0.20 6.8 70 5218.201
8 8 Mobile beam with bar, 3.20 m, adjustableSteel rectangular tube, hot-dip galvanized. For base widening in special rolling tower structures.
3.20 42.6 20 4106.032
9 9 Spigot, adjustableSteel, hot-dip galvanized. For use with mobile beam
ef o 1338 3
0.46 2.1 200 4106.005
The SpeedyScaf transom 1 is used for constructing intermediate levels.
Many other parts for non-standard scaffolding applications are available on request.
For large roof overhangs, use the installation of aluminium bridging ledgers 3. Spigots 4 on aluminium bridging ledgers hold the assembly frames above them and permit a 0.50 m or 1.00 m reduction of the bay width.
With the reducer from 1.09 m to 0.73 m 5, it is possible to reduce the scaffolding width from 1.09 m to 0.73 m.
i can e nece ary for exa ple at great eig t for structural reasons. This makes it possible to use assembly frames 70 on a substructure of meter-wide scaffolding.
The assembly frame joints are secured with locking pins 6 in special cases against unintentional lifting off, for exa ple en caffolding unit are oved with a crane, when brick guard supports are used or in particular wind conditions.
0.73 m
1.09 m
Castors 7The mobile solution for birdcage, bridge or suspended scaffolding is often the best alternative in terms of tec nical uita ility, c eduling and price In t i field too, the choice, the delivery capability and not least the experience of t e anufacturer point to ay er If caffolding i ade o ile u ing ca tor , I 3
applie or t e e rolling to er , verification of tructural strength is required.
Robust castors 7 with twin brake (it brakes wheel and slewing ring) for various loads, offer a safer mobility of the scaffolding – without high effort.
Further castors with higher load capacitiy or for en itive ooring you ll find in t e catalogue Scaffolding cce orie
e tele copic device idt ax 3 , in 3 e o ile ea can be used for all scaffolding systems (rolling towers, frame, modular and other scaffolding, tube-and-coupler) with a tube diameter of 48.30 mm.
EN_Katalog_Blitz_2015.indd 32 09.03.2015 13:24:33
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
33
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Accessories Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Intermediate transom, 0.73 mwith half-coupler, for intermediate layers 19 WS 0.73 3.9 100 1742.719
22 WS 0.73 4.0 100 1742.7222 2 Intermediate transom, 1.09 m
with half-coupler, for intermediate layers 19 WS 1.09 5.1 250 1742.119 W22 WS 1.09 5.1 250 1742.122 W
3 3 Aluminium bridging ledger, 2.57 mAluminium bridging ledger, 3.07 mfor mounting on spigot,for reduction of bay length.
2.57 8.5 90 1775.257 W3.07 9.7 90 1775.307 W
4 4 Spigotincl. 2 boltsfor furt er con truction on alu iniu ridging ledger ef o 177
0.20 1.8 250 1775.000 W
5 5 Reducer from 1.09 m to 0.73 mwith welded-on channel section
1.09 8.3 20 4027.000 W
6 6 Locking pin, red, dia. 11 mm 0.2 100 4000.001
7 7 Castor 700Plastic wheel, dia. 200 mm. With base plate, adjustment range 0.30 – 0.60 m, spindle nut with lock, castor with twinbrake lever and load centering when braked. Wheel and slewing ring can be locked.
er i i le load 7
dia. 0.20 6.8 70 5218.201
8 8 Mobile beam with bar, 3.20 m, adjustableSteel rectangular tube, hot-dip galvanized. For base widening in special rolling tower structures.
3.20 42.6 20 4106.032
9 9 Spigot, adjustableSteel, hot-dip galvanized. For use with mobile beam
ef o 1338 3
0.46 2.1 200 4106.005
IND
EN_Katalog_Blitz_2015.indd 33 09.03.2015 13:24:33
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
34
LAYHER PROTECTIVE SYSTEMSCATALOGUE
Edition 04.2015Ref. No. 8121.253
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
Railing clamp Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
3 4 3 Railing clamp 0.58 7.0 50 4015.100 W
4 Guardrail standard 0.88 4.7 50 4015.101 W
Railing clamp
Railing clamp 3ccording to er an regulation relating to
construction work, a fall protection system must be provided for work areas and walkways on roofs and intermediate levels where the height of the fall is more t an e ay er railing cla p ati fie t e e re uire ent for ecuring concrete oor la or fa cia of 16 33 c in eig t and at roof
The brick guard must be built in accordance with applicable regulations. The bay widths can be freely elected, ax 3 7 long e guardrail standard 4 is
attached to the railing clamp and receives the guardrail. en in talling on oor la , toe oard u t e
provided; these can be omitted in installation on fascias.
BAU/TB.......1)
Sicherheit geprüfttested safety
Weather protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Weather protection supportOn the outside, tilting pins for suspension of the tarpaulin, at the top there are two guardrail wedge housings for bracing using guardrails
2.00 13.2 100 1746.000 W
2 2 Tarpaulin for temporary intermediate roof7 x 73 7 x 1 6 4.5 5990.207 P7 x 73 7 x 1 6 5.6 5990.257 W
3 7 x 73 3 7 x 1 6 6.7 5990.307 W7 x 1 2.07 x 1.95 4.7 5991.207 P7 x 1 2.57 x 1.95 5.9 5991.257 W
3 7 x 1 3.07 x 1.95 7.0 5991.307 W
Weather protection
The weather protection support 1 is used for tarpaulin covering again t expo ure to t e eat er at t e top level of SpeedyScaf structures.
t t e top caffolding level, all a e ly fra e to ic the weather protection support is attached must be anchored to the building for resistance to tension and compression. The weather protection support must be attached to the guardrail support and to the assembly frame using two
ivel coupler , ef o 7 , and additionally raced a shown in the sketch using a steel scaffolding tube lengt 1 n t e out ide, tilting pin are u ed for
suspension of the tarpaulins, and at the top there are two guardrail wedge housings for bracing using guardrails.
Layher couplers and further tarpaulins can be found in our cce orie atalogue
Temporary intermediate roofThe roof tarpaulin 2 is secured to the horizontal or longitudinal ledgers or guardrails of the scaffolding bay. The inner and outer ledgers must be connected vertically offset from one another depending on the roof pitch. The roof tarpaulin ill e fixed it ela tic trap fa tener in only a few minutes. Quick belts on the wall side allow a tensioning against the building wall and ensure a good connection to the building.The projecting may be between 0.40 and 0.70 m.
ece ed fi ergla rod offer ta ility in t e tran ver e direction. The installation of the roof plan is scaffolding bay by bay. The tarpaulin ends will be easily closed with a hook and loop fastener. Structures outside of the rule require a proof in individual cases.
it t i innovative olution, for exa ple, paint er and plasterers are protected from precipitation and can per-for t eir or regardle of t e eat er t t e a e ti e t e roofing en ure protection of t e fre a ony
More solutions for weather, environment and pedestrian protection, please see the catalogue Protective System.
1950
Installation on oor la
Installation on fascia
EN_Katalog_Blitz_2015.indd 34 09.03.2015 13:24:37
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
35
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6IND
Railing clamp Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
3 4 3 Railing clamp 0.58 7.0 50 4015.100 W
4 Guardrail standard 0.88 4.7 50 4015.101 W
xa ple for u e of t e railing cla p on oor la xa ple for u e of t e railing cla p on fa cia
Weather protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 1 Weather protection supportOn the outside, tilting pins for suspension of the tarpaulin, at the top there are two guardrail wedge housings for bracing using guardrails
2.00 13.2 100 1746.000 W
2 2 Tarpaulin for temporary intermediate roof7 x 73 7 x 1 6 4.5 5990.207 P7 x 73 7 x 1 6 5.6 5990.257 W
3 7 x 73 3 7 x 1 6 6.7 5990.307 W7 x 1 2.07 x 1.95 4.7 5991.207 P7 x 1 2.57 x 1.95 5.9 5991.257 W
3 7 x 1 3.07 x 1.95 7.0 5991.307 W
EN_Katalog_Blitz_2015.indd 35 09.03.2015 13:24:38
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
36
Accessories
Accessories Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1a + b 2a + b 1a Double couplerla , 7 1 3
quality-monitored, for use in class B and BB on steel and aluminium tube
19 WS 1.3 25 4700.019
22 WS 1.3 25 4700.022
1b Double coupler with coarse thread Ze cription a o 1a
19 WS 1.3 25 4777.019
22 WS 1.3 25 4777.022
2a Swivel couplerla , 7 1 S 3 ,
quality-monitored, for use in class B on steel and aluminium tube
19 WS 1.5 25 4702.019
22 WS 1.5 25 4702.022
2b Swivel coupler with coarse thread Ze cription a o a
19 WS 1.5 25 4778.019
22 WS 1.5 25 4778.022
3 3 Scaffolding tube, steel, hot-dip galvanizedScaffolding tu e dia 8 3 x , a per I
1.00 4.5 61 4600.1002.00 9.0 61 4600.2003.00 13.5 61 4600.3004.00 16.7 61 4600.4005.00 22.7 61 4600.5006.00 25.0 61 4600.600
Identification and pro i ition ign for or caffolding a per I 1 811 1 Suita le see-through pocket 9 made of transparent plastic for weather protection. The three-piece scaffolding identification pad 6 with carbon copy developed to tag work scaffolding. The right part i t e in pection record for your file our client get the carbon. On the back side of the carbon, important application notes are listed.
Scaffolding couplers 1/2 connections, in steel, drop forged a per I 7 and general uilding aut ority approval fro t e I t er an ivil nginee-ring In titute ig tening tor ue of collar nut
Standardised scaffolding tubes 3 in steel (hot-dip galvanized) or aluminium permit, in conjunction with caffolding coupler , pecial a e ly and exten ion
outside the regular version.
Tools Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
4 5 4 Ratchet spannerwith reinforced head
19 WS 0.32 0.7 4740.019
22 WS 0.32 0.7 4740.022
5 Magnetic spirit level 0.4 4006.666
7 6 6 Scaffolding identification padPad with 50 + 50 pieces (Original + Carbon) with centre perforation and foldover as carbon-block
I 0.5 6344.500 W
8 9 7 Scabbling pick, 600 g, with steel tube handleand rubber safety grip
0.32 0.9 4421.050 W
8 Prohibition sign 18 x 1 0.2 20 v 6344.201
9 See-through pocketfor ef o 63 1 and 63
x 16 0.1 10 v 6344.001
Tools
Kennzeichnung und Freigabe Prüfprotokollfür Gerüste DIN EN 12811/ DIN 4420 nach §10/ §11 BetrSichV
Gerüstersteller:(ggf. mit Stempel)
Erstellungsort:
Gerüstart:
Nutzungsbeschränkungen (Hinweise für den Nutzer siehe Rückseite) :____________________________________________________________________________________________________________________________
Bemerkungen, Hinweise:__________________________________________________________________________________________________________________________
Regelausführung Typenprüfung AuV Einzelnachweis/Montageplan
Bekleidung:
Lastklasse:
Breitenklasse:
Die Summe der Verkehrslasten aller übereinanderliegenden Gerüstlagen in einem Gerüstfeld darf den vorgenannten Wert nicht überschreiten.
Auftraggeber:
befähigte Person beim Aufbau:
Aufbauzeitraum:
befähigte Person zur Prüfung:
Prüfungszeitraum:Telefonnummer:
Gerüst-Nr.:
Gerüstbauteile augenscheinlich unbeschädigt Maße – Belagbohlen, Rohrwanddicke Kennzeichnung – Rohre, Kupplungen, Bauteile
Standsicherheit Tragfähigkeit des Untergrunds Fußspindeln – Auszugslänge, Auflagerung Verstrebungen/Diagonalen (mindestens 1 pro 5 Felder in jeder Achse), Längsriegel Gitterträger – Druckgurtaussteifung, Auflagerung Verankerungen – Anzahl, Ankergrund, Ankerraster, Abstand, Prüfung
Beläge Gerüstlagen – voll ausgelegt oder Horizontalaussteifung Gerüstbohlen – Querschnitt, Auflagerung Abhubsicherung – bei auftretenden Abhubkräften Eckausbildung – in voller Breite, Seitenschutz
Arbeits und dreiteiliger Seitenschutz – Stirnseitenschutz Betriebs- Öffnungen – Spalte geschlossen, volle Breitenklasse sicherheit Aufstiege, Zugänge – Anzahl, Eignung, Höhe (Leitern < 5 m), Verkehrssicherung – Beleuchtung, Absperrung Konsolen, Auskragungen – Abstrebung, Verankerung freistehende Türme – Breite zu Höhe, Ballast Abstand Bauwerk und Belag – innenliegender Seitenschutz Schutzwand im Dachfanggerüst
Fahrgerüste Fahrrollen, Belastung, Untergrund, Ballast, Verbreiterung
Kennzeichnung nicht fertiger Bereich abgegrenzt und gekennzeichnet Kennzeichnungsschild an den Zugängen
Keine Planen Netze _______________
Arbeitsgerüst nach EN 12811 Fassadengerüst Raumgerüst Schutzdach Schutzgerüst nach DIN 4420 Fanggerüst Dachfanggerüst Sondergerüst: __________ Treppenturm Fahrgerüst
2 (150 kg/m²) 3 (200 kg/m²) 4 (300 kg/m²) ___ (______kg/m²)
W06 W09 W_____ SW_____
Telefonnummer:
6344
.500
09
/201
0
Konstruktion:
Geprüft und freigegebenbefähigte Person des Gerüsterstellers:
Datum, Unterschrift Datum, Unterschrift
befähigte Person des Nutzers:
Eigenmächtige Änderungen am Gerüst sind ohne vorige Rücksprache mit dem Gerüstersteller untersagt! Die Anweisungen der Aufbau- und Verwendungsanleitung sind sorgfältig zu befolgen!
Wilhelm Layher GmbH & Co. KGGerüste Tribünen LeiternOchsenbacher Straße 56D-74363 Güglingen-Eibensbach
Gerüst-Nr.: ____________________________
Geprüft und freigegebenbefähigte Person des Gerüsterstellers:
Datum, Unterschrift Datum, Unterschrift
befähigte Person des Nutzers:
Ja Nein nicht zu-treffend
In Ordnung?
Zutritt verbotenWilhelm Layher GmbH & Co. KGGerüste Tribünen Leitern Ochsenbacher Straße 56D-74363 Güglingen-Eibensbach
Postfach 40D-74361 Güglingen-EibensbachTelefon (0 71 35) 70-0Telefax (0 71 35) 70-2 65E-Mail: [email protected]
For right-angled connection of tubes with dia. 48.30 mm
1a + b
For connection at any angle of tubes with dia. 48.30 mm
EN_Katalog_Blitz_2015.indd 36 09.03.2015 13:24:40
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
37
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Accessories Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1a + b 2a + b 1a Double couplerla , 7 1 3
quality-monitored, for use in class B and BB on steel and aluminium tube
19 WS 1.3 25 4700.019
22 WS 1.3 25 4700.022
1b Double coupler with coarse thread Ze cription a o 1a
19 WS 1.3 25 4777.019
22 WS 1.3 25 4777.022
2a Swivel couplerla , 7 1 S 3 ,
quality-monitored, for use in class B on steel and aluminium tube
19 WS 1.5 25 4702.019
22 WS 1.5 25 4702.022
2b Swivel coupler with coarse thread Ze cription a o a
19 WS 1.5 25 4778.019
22 WS 1.5 25 4778.022
3 3 Scaffolding tube, steel, hot-dip galvanizedScaffolding tu e dia 8 3 x , a per I
1.00 4.5 61 4600.1002.00 9.0 61 4600.2003.00 13.5 61 4600.3004.00 16.7 61 4600.4005.00 22.7 61 4600.5006.00 25.0 61 4600.600
Tools Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
4 5 4 Ratchet spannerwith reinforced head
19 WS 0.32 0.7 4740.019
22 WS 0.32 0.7 4740.022
5 Magnetic spirit level 0.4 4006.666
7 6 6 Scaffolding identification padPad with 50 + 50 pieces (Original + Carbon) with centre perforation and foldover as carbon-block
I 0.5 6344.500 W
8 9 7 Scabbling pick, 600 g, with steel tube handleand rubber safety grip
0.32 0.9 4421.050 W
8 Prohibition sign 18 x 1 0.2 20 v 6344.201
9 See-through pocketfor ef o 63 1 and 63
x 16 0.1 10 v 6344.001
IND
EN_Katalog_Blitz_2015.indd 37 09.03.2015 13:24:41
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
38
Fall protection
Scaffolding pallets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
8 10 8 Assembly frame pin pallet0.73 m1.09 m
1 x 77 34.0 10 5113.0731 x 1 13 36.2 10 5113.109 W
9 9 Retaining rod 1.20 2.1 5113.12010 Retaining bar 1.12 3.1 5110.112
11 12 11 Tube pallet 125 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1500 kg
1 37 x 7 35.0 10 5105.125
12 Tube pallet 85 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1500 kg
7 x 7 30.8 10 5105.085
14 13 13 Modular palletSteel, hot-dip galvanized, fill eig t 7 , load g, external di en ion 1 6 x 86
1 6 x 86 45.0 5 5101.061 W
14 Modular skeleton boxSteel, hot-dip galvanized, fill eig t at front 3 , fill eig t at rear 7 ,load g, external di en ion 1 6 x 86 con i ting of 113 odular eleton ox and 6 1 ti er a e plate
1 6 x 86 85.8 5113.002
Fall protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 3 2 1 PSA-safety harness AX 60 C with extension, 0.50 mconfor 361
1.8 5969.160 P
2 PSA-Flex safety rope, 2.00 mwith fall arrester and snap hook FS 90;a per 3 3self-shortening to reduce tripping hazards
2.00 m 1.1 5969.501 W
4 5 3 PSA scaffolding construction setPos. 1 and 2safety harness, safety rope 2.00 m, backpack
e only in caffolding con truction
3.5 5969.170 W
7 4 Advance guardrail postlu iniu
for one advance guardrail (1.00 m high); rapid attachment of guardrails with tilting pins
4.2 50 4031.001 W
5 Advance guardrail postlu iniu
for two advance guardrails (0.50 m and 1.00 m high); rapid attachment of guardrails with tilting pins
4.3 50 4031.002 W
6 6 Assembly guardrail, 1.57 / 2.07 m, lu iniuAssembly guardrail, 2.57 / 3.07 m, lu iniu
1.70 3.2 50 4031.207 W
2.30 4.0 50 4031.307 W7 Advance guardrail system (AGS)
for scaffolding endlu iniu , ingle part
x 7 9.8 6 4031.000 W
Scaffolding pallets
Tube palletsin square shape (85) or in rectangular shape (125). The pallets are open on all sides. Tubes, standards, guardrails, diagonal braces, toe boards are transported and stored with this pallet. The empty pallets, stored permanently in the base frame using pallet posts, can be transported and stored in a space-saving way.
Tube pallet 125 11 e follo ing can e tran ported, for exa ple
13 Frames, 0.73 m or 11 Robust decks 0.61 m or 15 Stalu decks 0.61 m or 24 Steel decks 0.32 m.
Modular pallet and skeleton box 13/14 e palette or t e eleton ox can e tac ed it uro
pallets. Crane eyelets at top; an opening allows stacked material to be removed even if several pallets are stacked one above the other. The integrated timber base plate is 3 t ic and it nailed onto x uare timbers.
80 cm
120 cm71 cm 71 cm
80 cm
80 cm
ore pallet you ll find in t e catalogue Scaffolding Accessories.
LAYHER SCAFFOLDING ACCESSORIESCATALOGUE
Edition 04.2015Ref. No. 8103.254
Quality management certified accordingto ISO 9001:2008 by German TÜV-CERT
8
ccording to er an regulation , e uip ent to prevent falls by personnel must be provided for work areas and al ay ere t e eig t of t e fall i ore t an
The PSA-safety harness AX 60 C 1 has impressive features:2 Comfortable, padded and ergonomic back support2 Convenient tool holders and click-locks for easy fastening2 High operational dependability and absolute freedom
from maintenance, plus very simple fastening2 Operating errors are not possible, as the equipment
operates in any position2 xcellent running even under gruelling or ing
conditions2 Enormous distribution of forces in the event of a fall.
Before use, visual checks must be performed regularly to ensure correct working order. In accordance with German
1 8 regulation , all per onal afety e uip ent u t e in pected at lea t once a year y an expert e axi u per i i le period of u e for t e e uip ent u t not e exceeded
The advance guardrail post 4/5, the advance telescopic guardrail 1.57/2.07 m, the advance telescopic guardrail 2.57/3.07 m 6 and the End-AGS 7 are used for temporary protection against falls during assembly of scaffolding parts on the uppermost, unsecured scaffolding level.
Extension lengthsArticle L min. L max.
e ly guardrail 1.57/2.07 m 1.57 m 2.90 m
e ly guardrail 2.57/3.07 m 2.20 m 3.70 m
EN_Katalog_Blitz_2015.indd 38 09.03.2015 13:24:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
39
WS = wrench size PU = packaging unit W = available ex works P = delivery time on request V = only available in this packaging unit Z = the approval process is not yet completed
= Layher Individual possible – see page 6
Scaffolding pallets Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
8 10 8 Assembly frame pin pallet0.73 m1.09 m
1 x 77 34.0 10 5113.0731 x 1 13 36.2 10 5113.109 W
9 9 Retaining rod 1.20 2.1 5113.12010 Retaining bar 1.12 3.1 5110.112
11 12 11 Tube pallet 125 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1500 kg
1 37 x 7 35.0 10 5105.125
12 Tube pallet 85 Steel, hot-dip galvanized, length of pallet posts: 0.86 m,load 1500 kg
7 x 7 30.8 10 5105.085
14 13 13 Modular palletSteel, hot-dip galvanized, fill eig t 7 , load g, external di en ion 1 6 x 86
1 6 x 86 45.0 5 5101.061 W
14 Modular skeleton boxSteel, hot-dip galvanized, fill eig t at front 3 , fill eig t at rear 7 ,load g, external di en ion 1 6 x 86 con i ting of 113 odular eleton ox and 6 1 ti er a e plate
1 6 x 86 85.8 5113.002
Fall protection Pos. Description DimensionsL/H x W [m]
Weight approx. [kg]
PU[pcs.]
Ref. No.
1 3 2 1 PSA-safety harness AX 60 C with extension, 0.50 mconfor 361
1.8 5969.160 P
2 PSA-Flex safety rope, 2.00 mwith fall arrester and snap hook FS 90;a per 3 3self-shortening to reduce tripping hazards
2.00 m 1.1 5969.501 W
4 5 3 PSA scaffolding construction setPos. 1 and 2safety harness, safety rope 2.00 m, backpack
e only in caffolding con truction
3.5 5969.170 W
7 4 Advance guardrail postlu iniu
for one advance guardrail (1.00 m high); rapid attachment of guardrails with tilting pins
4.2 50 4031.001 W
5 Advance guardrail postlu iniu
for two advance guardrails (0.50 m and 1.00 m high); rapid attachment of guardrails with tilting pins
4.3 50 4031.002 W
6 6 Assembly guardrail, 1.57 / 2.07 m, lu iniuAssembly guardrail, 2.57 / 3.07 m, lu iniu
1.70 3.2 50 4031.207 W
2.30 4.0 50 4031.307 W7 Advance guardrail system (AGS)
for scaffolding endlu iniu , ingle part
x 7 9.8 6 4031.000 W
IND
EN_Katalog_Blitz_2015.indd 39 09.03.2015 13:24:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
40
Index
AAccess deck 16
Access ladder 17T15 17
Accessories 32, 36
Adjustable guardrail 18
Adjustment frames 12
Advance guardrail post 38, 39
Advance guardrail system (AGS) 39
Advance telescopic guardrail1.57/2.07 m 382.57/3.07 m 38
Allround ledger 24
Aluminium bridging ledger 322.57 m 333.07 m 33
Aluminium platform stair 28
Anchoring 24
Assembly frame 12
Assembly frame pin pallet 12, 13, 39
Assembly frames for special applications 30
Assembly guardrail1.57/2.07 m 392.57/3.07 m 39
BBase ledger 21
Base plate 1060 1180, reinforced 11150, reinforced 11
Bracket 22
Brick guard support 26
CCap 25
Castor 32700 33
Comfort stairway 28
Connecting clamp for Stalu deck 14, 15
Console bracket 220.22 m 22, 230.36 m 22, 230.50 m 22, 230.73 m 22, 230.73 m, reinforced 22, 230.73 m, swivelling 22, 231.09 m 22, 23
Corner deck, adjustable 16, 17
DDeck, 0.61 m 22
Diagonal brace 20with 2 half-couplers 21with wedge half-coupler 21
Diagonal bracing 20
Double coupler 24, 37with coarse thread 37
Double end guardrail 180.73 m 191.09 m 19
Double guardrail 18, 26aluminium 19steel 19
EEnd-AGS 38
End guardrail 18
End toe board 21
ETICS hanger bolt 25
ETICS-tie 24600 25600 complete 25800 25800 complete 25
ETICS-tie rod380 25480 25
Euro assembly frame 12, 24, 262.00 m, for balustrade 30, 312.00 x 0.36 m 30, 31aluminium 13steel 13
2 guardrail wedge housings 133 guardrail wedge housings 13
Euro assembly frame LWsteel 13
2 guardrail wedge housings 134 guardrail wedge housings 13
Euro eaves bracket1.00 m 30, 31
Euro guardrail post 26, 27
Euro intermediate frame 26aluminium, without spigot
0.73 m 27steel
0.73 m 271.09 m 27
Euro top end frame 26aluminium, without spigot
0.73 m 27steel
0.73 m 271.09 m 27
Extension lengths 38
External scaffolding access 16
FFall protection 38
Fan support 26, 27
GGantry frame 12
Gantry frame LW 30, 31
Gap covers 16
Gap deck 16
Guardrail, adjustable 19
Guardrail box for Euro frame 18, 19
Guardrail closure 26
Guardrail closure, top 26
Guardrail coupler 18with box 19
Guardrail standard 34, 35
Guardrail wedge housing cover 31
Gusset coupler 25
HHalf-coupler with toe board pin 20, 21
Hatch-type access with offset hatch 16
IIndividual toe board 20
Initial stairway guardrail 29
Intermediate transom0.73 m 331.09 m 33for lattice beam 31
Internal guardrail 29T12 29
Internal guardrail fixing device 18
Internal scaffolding access 16
LLattice beam coupler 30, 31
LayPLAN SpeedyScaf system 11
Lock against lift-off 22, 23
Locking pin 17, 26, 32, 33
Lock nut 25
MMagnetic spirit level 37
Mobile beam with bar 33
Modular pallet 38, 39
Modular skeleton box 38, 39
Modular stairway 28
OOpen ended wrench 25
Outer landing-type stairway access 28
PPedestrian protection 26
Peg extraction device 25
Peg solid 25
Plastic pipe 25
Plastic wall insert 25
Plug-in console bracket0.22 m 22, 230.36 m 22, 23
Prohibition sign 37
Protection netwithout quick belt 27with quick belt 27
EN_Katalog_Blitz_2015.indd 40 09.03.2015 14:41:40
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
41
PSA-Flex safety rope 39
PSA-safety harness AX 60 C 38, 39
PSA scaffolding construction set 39
QQuick belt 27
RRailing clamp 34, 35
Ratchet spanner 37
Reducer 32, 33
Retaining bar 13, 39
Retaining rod 13, 39
Ring screw 25
Roofer’s guard system 26
Roof tarpaulin 34
SScabbling pick 37
Scaffolding access, outside 28
Scaffolding couplers 36
Scaffolding deck 14
Scaffolding identification pad 36, 37
Scaffolding pallet 12, 38
Scaffolding plank 11
Scaffolding tube 36, 37
Section brace 21, 22, 23
Securing screw 17
See-through pocket 36, 37
Side protection 18, 20
Side protection net 26
Single end guardrail0.73 m 191.09 m 19
Single guardrail 18, 19
Software for scaffolding construction 10
Speedy Internal guardrail fixing devicewithout toe board pin 19with toe board pin 19
SpeedyScaf corner plate coupler 24
SpeedyScaf lattice beamaluminium 31LW 30
SpeedyScaf lattice beam LWsteel 31
SpeedyScaf roof guard 27
SpeedyScaf roof guard support0.36/0.50/0.73 m 271.09 m 27
SpeedyScaf transom 16, 32
SpeedyScaf wall tie 24, 25
Spigot 32, 33adjustable 33
Stair foot section0.60 m 290.95 m 29
Stair guardrail 29
Stair head section0.60 m 290.95 m 29
Stair middle section0.60 m 290.95 m 29
Stairway access 28
Stairway-guardrail post 29
Stairwell guardrail 29
Standard brick guard 26
Starter U-transom 28, 29
Steel bolt, self-securing 17
Steel-gap cover, 0.32 m wide 17
Steel lattice beam450 31system free 30
Steel plank 160.20 m 170.30 m 17
Steel tube, 33.70 mm 15
Swivel coupler 37with coarse thread 37
Swivelling base plate 60, reinforced 11
System lattice beam 30
TTarpaulin for temporary intermediate roof 35
Telescopic gap deck 16, 28
Telescopic stabilizer, steel 25
Telescopic U-gap deck 17
Temporary intermediate roof 34
Toe board 20, 21
Tools 36
Tube pallet 3885 39125 38, 39
UU-alu deck, perforated, 0.32 m wide 15
U-aluminium access deck, 0.61 m wide 17
U-aluminium hatch-type access deck 17
U-comfort stairwayaluminium
0.64 m wide 29
U-distance coupler 28, 29
U-hatch-type steel access deck, 0.64 m wide 17
U-ledger for lattice beam 31
U-platform stairwayaluminium
0.64 m wide 29
U-robust deck0.32 m wide 150.61 m wide 15
U-robust hatch-type access0.61 m, hatch offset 17
U-robust hatch-type access deck0.61 m wide 17
U-stairway stringer 500 29
U-stalu deck 14
U-stalu deck T90.19 m wide 150.32 m wide 150.61 m wide 15
U-starting stairwayaluminium
0.64 m wide 29
U-start ledgers 16
U-steel deck, 0.19 m wide 15
U-steel deck T4, 0.32 m wide 15
U-Xtra-N deck 140.61 m wide 15, 17
WWall tie 24, 25
Weather protection 34
Weather protection support 34, 35
Wedge spindle swivel coupler 11
EN_Katalog_Blitz_2015.indd 41 09.03.2015 14:41:40
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
42
Notes
EN_Katalog_Blitz_2015.indd 42 09.03.2015 13:24:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
43
EN_Katalog_Blitz_2015.indd 43 09.03.2015 13:24:46
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf
ef
o 8
16
ditio
n
1
Wilhelm Layher GmbH & Co. KGScaffolding Grandstands Ladders
Ochsenbacher Strasse 5674363 Gueglingen-EibensbachGermany
o t ox 74361 Gueglingen-EibensbachGermanyTelephone +49 (0) 71 35 70-0elefax 71 3 7 6
ail export lay er cowww.layher.com
roxi ity to t e cu to er i a central factor e ind ay er ucce geograp ically pea-king too. Wherever our customers need us, we will be there – with our advice, assistance and solutions.
Layher is your dependable partner it ore t an 7 year of experience
”Made by Layher“ always means ”Made in Germany“ too – and that goes for the entire product range. Superb quality – and all from one source.
ead arter in i en ac
Plant 2 in Gueglingen
SpeedyScaf
Allround Scaffolding
Event Systems
Accessories
Protective Systems
Shoring
Rolling Towers
Ladders
EN_Katalog_Blitz_2015.indd 44 09.03.2015 13:24:54
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA
0101
7416
_Kat
_Blit
z_E
N.p
df
PA01017416_Kat_Blitz_EN.pdf
PA01017416_Kat_Blitz_EN.pdf