LDK Solar Cell

8/13/2019 LDK Solar Cell

1/36

ENGLISH

FROM POLYSILICONTO PV SYSTEMS


2/362

CORPORATE

2 GW VERTICAL INTEGRATION

GRID PARITY FORMULA

POLYSILICON

INGOTS

WAFERS

CELLS

MODULES

SYSTEMS

PROJECTS AND PRODUCTS

LDK PROJECTS AND SYSTEMS CASES

LDK MODULES: QUALITY AND GUARANTEES

FULL-BLACK MODULE

FRAMELESS MODULE

MONOCRYSTALLINE MODULES

POLYCRYSTALLINE MODULES

LDK SYSTEMS: RESIDENTIAL KITS

LDK SYSTEMS: FINANCIAL SOLUTIONS

ADVERTISING

4

7

8

9

10

11

1213

14

19

20

21

22

26

32

34

35

CONTENTS


3/363

LDK SOLAR IS

THE WORLDS LARGEST AND MOST COSTEFFECTIVE VERTICALLY INTEGRATEDMANUFACTURER,BEST IN CLASS TECHNOLOGY

Vertically integrated solar manufacturerCost leaderLeadership in PV modules and technologyStrong and diversified customer baseAttractive growth strategies


4/364

POLYSILICON

12.000 MT TODAY

25.000 MT BY END OF 2011

TRULY VERTICA LLY INTEGRATED LEADER IN THE

INGOT/WAFER

IN HOUSE

3.6 GW TODAY

4.2 GW BY END OF 2011

SILICON RECYCLING

IN HOUSE

6.000 / 8.000 MT PER YEAR

IN HOUSE & THIRD PARTY


5/365

SOLAR INDUSTRY

MODULE

IN HOUSE

2 GW TODAY

3.2 GW BY END OF 2011

PV FINANCINGSOLUTIONS

GLOBAL PRESENCE

CELL

IN HOUSE & THIRD PARTY

1 GW TODAY

2 GW BY END OF 2011


6/366

PROVEN COST REDUCTIONROADMAP

VERTICAL INTEGRATION


7/367

GRID PARITY FORMULA

LDK Solar manufactures polysilicon, mono and multi crystalline ingots, wafers, cells and modules under one roof.An incredibly competitive cost structure with high quality and efficiency products that means the best formula to the real

grid parity.

2 GWTHE BIGGEST

FULLYINTEGRATEDPRODUCTIONIN THE WORLD

ECONOMIES

OF SCALE & RAPID

GROWTH+

COMPETITIVE

COST STRUCTURE+

HIGH QUALITY

HIGH EFFICIENCY

PRODUCTS

+

GRID PARITYLDK SOLAR=


8/368

THE GLOBAL LEADINGPOLYSILICON PLANT SITE

LDK POLYSILICON 12.0

00

MTtoda

y

As a part of its vertical integration strategy, in 2008 LDK

Solar constructed a polysilicon plant with two production

facilities, near its wafer production facilities. With a total yearly

production capacity of 12000 MT, this is the largest single

polysilicon manufacturing plant site in the world.

The installation of a closed loop polysilicon production process

allows LDK Solar to produce and use on site many of the key

chemicals and gases required to make silicon, while also

recycling residual STC.

TECHNICAL SPECIFICATION 11N

SiliconGrade

Semi-conductorGrade

Solar Grade

N-TypeResistivity (.cm)

>300

>50

P-TypeResistivity (.cm)

>3000

>500

Carbon Content(atoms/cm3)

>1,5 x 1 E16

>2,5 x 1 E16


9/369

LARGER INGOT PRODUCTIONMEANS COST REDUCTION

LDK INGOTS 3.6

GWtoda

y

At LDK Solar, we produce larger monocrystalline and multicrystalline

ingots. This innovation enables us to increase our yield of ingots and

improve the utilization rates of our facilities thus reducing costs by

reaching large scale economies. For example, LDK Solar produces

800-kg multicrystalline ingots which increase throughput production

efficiencies by reducing manufacturing bottlenecks.

LARGER INGOT SIZE FURTHER LOWERS COST

G4 250-270 kg

G5 400-450 kg

G6 650-800 kg

G6 800 kg

LDK CURRENTPRODUCTION


10/3610

THE LARGESTMULTICRYSTALLINE WAFERPROVIDER IN THE WORLD

LDK WAFERS3.6GWtoda

y

As the largest multicrystalline wafer provider in the world, LDK

Solar has an established track record of consistently delivering

high quality solar wafers to our valued customers. We take pride

in providing technologically advanced and reliable solar wafers.

At LDK Solar, we utilize state-of-the-art wafer processing

equipment combined with proprietary know-how that enables us

to make efficient use of polysilicon and therefore lower the costs.

Mono

Multi


11/3611

PV CELL IN-HOUSEMANUFACTURING

LDK CELLS1GWtoda

y

Manufacturing in-house PV cells and increasing the efficiency of

solar cells is one of the most effective ways to reduce the cost

of PV modules. We completed our 1 GW manufacturing line and

can now produce our own cells in-house. We also developed

new high-efficiency monocrystalline and multicrystalline cell

technology. Manufacturing our own cells in-house enables us to

reduce the cost of modules and increase quality management.

Mono

Multi


12/3612

MAKING SOLARMODULES ACCESSIBLEFOR EVERYONE

LDK MODULES2GWtoda

y

Vertically integrated manufacturing

Large scale production facilities

Proven low-cost manufacturing

High-quality, high-efciency products

Leading global wafer supplier

Diversied global customer base

CAPACITY:

600 MWApril 2010

2 GWToday

3.2 GWBy the end of 2011

Mono

Multi


13/3613

THE FINAL DOWNSTREAMINTEGRATION

LDK SYSTEMS / PROJECTS

LDK Solar has reached our goal to become the most vertically

integrated PV company by also providing system

integration. With proven experience, know-how and passion to

help our clients, LDK Solar can provide engineering and design

support, ensure the quality of the products and monitor the

efficiency of the system.

We can also offer financing solutions, thanks to a strategic

agreement with China Development Bank that will provide up

to $ 8.9 billion of credit facilities to LDK Solar over a five-yearperiod.

Financia

l

solution

service

NEW


14/3614

LDK SYSTEMS AND PROJECTS


15/3615

LDK SYSTEM CASES IN 2010

Country: ItalySite: Altamura (BA)Peak power: 1 MWTechnology: Ground mono axisModules: LDK 220WMonths since connection: 12PRODUCTION: 1.700.000 kWh

PR: 81% (+ 6% COMPARED TO JRC)

Country: ItalySite: Palo del Colle (BA)Peak power: 1 MWTechnology: Ground fixModules: LDK 220WMonths since connection: 4

PRODUCTION: 372.492 kWhPR: 86% (+ 11% COMPARED TO JRC)

SOLD

SOLD


16/3616


Country: ItalySite: Roccaforzata (TA)Peak power: 1 MWTechnology: Ground fixModules: LDK 220WMonths since connection: 7PRODUCTION: 695.523 kWh

PR: 83% (+8% COMPARED TO JRC)

Country: ItalySite: PugliaPeak power: 3 MWTechnology: Ground mono axisModules: LDK 220W

SOLD

FINANCE

D

BYCDB


17/3617


Country: ItalySite: San Gregorio nelle Alpi (BL)Peak power: 857 kWTechnology: Greenhouses and parkingModules: LDK 240W

Country: ItalySite: Loria (TV)Peak power: 309 kWTechnology: GreenhousesModules: LDK 230W

CONNEC

TED

CONNEC

TED


18/3618


42 MW PV project in Germany co-financedby LDK Solar and Q-Cells

Site: Finsterwalde, Germany


19/3619

OUR MODULE QUALITY IS RELIABLEAND GUARANTEED

LDK SOLAR MODULES

MODULEQUALITY

MODULEWARRANTY

MODULERECYCLING

MANUFACTURED UNDER STRINGENT QUALITY CONTRACT STANDARDS:

0/+5 Wp power classication

high conversion efciency

ability to withstand wind and snow load, and extreme temperature variations

rigorous quality control meeting the highest international standards industry leading 25 year power warranty

ONE OF THE MOST COMPREHENSIVE WARRANTIES IN THE SOLAR

INDUSTRY:

materials and workmanship - covered for 10 years

power rating - tight power tolerances within +/- 3% of the module nameplate

rating

start date - from the date of sale, not the date of manufacture

transferability - transferable to future system owners unlike other standard

warranties

SINCE THE BEGINING OF 2010 LDK SOLAR IS A PROUD MEMBER OF PV

CYCLE

LDK Solar is committed to finding new ways to make our solar modules even

more environmentally friendly, from increasing both cell and production

efficiencies, to proactively adopting recycling programs for end-of-life PVmodules


20/3620

185D-190D-195D-200D-24 (S)FULL-BLACK DESIGN

FULL-BLACK MODULE

PRODUCT HIGHLIGHTS

IV CURVE AT DIFFERENT IRRADIANCE LEVELS

Current[A]

Voltage [V]

0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50

DIMENSIONS

Tolerance of length and width dimensions is 2 mm

40

950

808

770

800

50

5030

30

140

390

808

1580

4-1010Drainage holes

4 places

8-8x3Drainage holes

8 placesJunction box

8-14x9Mounting slots

8 places

2-4Ground holes

2 places

1300

1580

Best efciency and reliability with a

modern and attractive black look

Designed to be the perfect module for

roof-top and residential roof

Based on strict demands to reach

architectural appearance requirements

Highlights: elegant, modern and

attractiveELECTRIC CHARACTERISTICS (STC*)

MECHANICAL CHARACTERISTICS

Nominal Output (Pmax) [W]

Voltage at Pmax (Vmp) [V]

Current at Pmax (Imp) [A]

Open Circuit Voltage (Voc) [V]

Short Circuit Current (Isc)

The power tolerance is +/- 3% referred to the Nominal Output

Maximum System Voltage

Cell EfficiencyModule Efficiency

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

ConnectorCables

Dimension

Weight

Max. Load








Cell Efficiency

Module Efficiency

185

36.9

5.02

45.1

5.48

17.7714.49

72 (6x12) monocryst. silicon solar cells 125 x 125 mm

3.2 mm thick, tempered glass / AR coating glass

TPT (Tedlar-PET-Tedlar) / BBF

EVA (ethylene vinyl acetate)

Anodized aluminium alloy, double wall

6 Bypass diodes serviceable

IP65 rated

MC4 or compatible connectorLentgh: 950 mm / Section: 4.0 mm2

1580 x 808 x 40 mm / 62,2 x 31,8 x 1,6 (new dim.)

15.6 kg / 34.4 lbs

Wind Load: 2400Pa / Snow Load: 5400 Pa

195

37.9

5.16

45.3

5.54

18.73

15.27

190

37.7

5.05

45.2

5.51

18.25

14.88

200

38.1

5.27

45.4

5.57

19.21

16.67

TYPE

TYPE

TYPE

185D-24(s)

185D-190D-195D-200D-24(s)

195D-24(s)

190D-24(s)

200D-24(s)

IEC: 1000V / UL: 600 V

IEC: 1000V / UL: 600 V

NEW

STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25C, Air Mass 1.5

LDK Solar reserves the right to make specifications changes without any prior notice.This data sheet complies with the EN 50380 requirement. May 2011/V3/ LDK Solar Limited.All rights reserved. E.&O.E.


21/3621

185D-190D-195D-200D-24 (S)FRAMELESS FOR BIPV AND ARCHITECTURE

FRAMELESS MODULE


PRODUCT HIGHLIGHTS

Current[

A]

Voltage [V]

0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50

DIMENSIONS


950

802

1574

104,

24

Junction box

Specially designed for BIPV and

architectural applications

Suitable for all standard building-

integrated mounting systems

Allows easy and exible installation on

roof-top use

Options: standard or black appearance

available

ELECTRIC CHARACTERISTICS (STC*)









Cell EfficiencyModule Efficiency

Solar Cells

Front Cover

Back Cover

Encapsulant

Diodes

Junction Box

Connector

Cables

Dimension

Weight








Cell Efficiency

Module Efficiency

185

36.9

5.02

45.1

5.48

17.7714.49

72 (6x12) monocryst. silicon solar cells 125 x 125 mm





IP65 rated

MC4 or compatible connector

Lentgh: 950 mm / Section: 4.0 mm2

1574 x 802 x 4,5 mm / 62 x 31.6 x 0,2 inches (new dim.)

12.4 kg / 26,4 lbs

195

37.9

5.16

45.3

5.54

18.73

15.27

190

37.7

5.05

45.2

5.51

18.25

14.88

200

38.1

5.27

45.4

5.57

19.21

16.67

TYPE

TYPE

TYPE

185D-24(s)

185D-190D-195D-200D-24(s)

195D-24(s)

190D-24(s)

200D-24(s)

IEC: 1000V / UL: 600 V

IEC: 1000V / UL: 600 V

NEW


LDK Solar reserves the right to make specifications changes without any prior notice.This data sheet complies with the EN 50380 requirement. May 2011/V3/ LDK Solar Limited.All rights reserved. E.&O.E.


22/3622

180

36.2

4.98

44.9

5.46

17.28

14.10

130

32.8

3.96

41.3

4.42

452C

-0.47% / C-0.34% / C

0.06% / C

20 A

-40 to +85C

-40 to +60C

25 pcs. / box

50 pcs. / pallet

700 pcs. / 40 ft (H)

72 (6x12) monocrystalline silicon solar cells 125 x 125 mm






IP65 rated



1580 x 808 x 40 mm / 62,2 x 31,8 x 1,6 inches (new dimensions)

15.6 kg / 34.4 lbs


185

36.9

5.02

45.1

5.48

17.77

14.49

134

33.6

3.98

41.5

4.44

190

37.7

5.05

45.2

5.51

18.25

14.88

138

34.6

3.99

41.6

4.46

195

37.9

5.16

45.3

5.54

18.73

15.27

142

35.5

4.01

41.8

4.48

200

38.1

5.27

45.4

5.57

19.21

16.67

146

36.4

4.03

42

4.50


ELECTRICAL PERFORMANCE AT NOCT

TEMPERATURE CHARACTERISTICS

PACKING CONFIGURATION


TYPE

TYPE

TYPE

TYPE

TYPE








Cell Efficiency

Module Efficiency

Nominal Output (Pmax)

Voltage at Pmax (Vmp)

Current at Pmax (Imp)

Open Circuit Voltage (Voc)


NOCT**

Temperature Coefficient of PmaxTemperature Coefficient of Voc

Temperature Coefficient of Isc

Maximum Series Fuse Rating

Operating Temperature

Storage Temperature

Packing Configuration

Quantity/Pallet

Loading Capacity

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

Connector

Cables

Dimension

Weight

Max. Load


NOCT: Irradiance 800 W/m2, Module Temperature 45 2C, Air Mass 1.5

NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20C; wind speed 1m/s

LDK Solar reserves the right to make specifications changes without any prior notice.This data sheet complies with the EN 50380 requirement. May 2011/V3/ LDK Solar Limited. All rights reserved. E.&O.E.

180D-24(s)

180D-24(s)

LDK-D-24 Series (s)

LDK-D-24 Series (s)

LDK-D-24 Series (s)

185D-24(s)

185D-24(s)

190D-24(s)

190D-24(s)

195D-24(s)

195D-24(s)

200D-24(s)

200D-24(s)

IEC: 1000V / UL: 600 V



23/3623

180D-185D-190D-195D-200D-24 (S)NEW DIMENSIONS

WHY LDK SOLAR MODULES

WARRANTIES

CERTIFICATES

Industry leading module power output warranty International quality, safety and performance certications

Modules manufactured in ISO 9001 certied factories

High-reliability with guaranteed 0/+5W peak power

classification

10 years for product defects in materials & workmanship

12 years for 90% of warranted minimum power


IEC: IEC 61215, IEC 61730 (1&2), conformity to CE

UL1703 2002/03/15 Ed:3 Rev: 2004/06/30

ULC/ORD-C1703-01 second edition 2001/01/01

UL and Canadian standard for safety at-plate

ISO9001:2008 Quality Management System

CEC Listed: modules are eligible for California rebates

PV Cycle: voluntary module take back and recycling program

PERFORMANCE AT LOW IRRADIANCE


DIMENSIONS

1.05

1

0.95

0.9

0.85

0.8200 300 400 500 600 700 800 900 1000

R

elativeEfciency

Current

[A]

Irradiance [W/m2]

Voltage [V]

The typical relative change in module efficiency at an irradiance of 200W/min relation to 1000W/m (both at 25C and AM 1.5 spectrum) is less than 6%

Above graphics according to LDK-180D-24(s)


0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50

40

950

808

770

800

50

5030

30

140

390

808

1580


4 places

8-8x3Drainage holes


8-14x9

Mounting slots8 places

2-4Ground holes

2 places

1300

1580


24/3624

225

31.5

7.15

37.0

8.11

16.18

13.79

220

31.2

7.05

36.9

8.01

15.81

13.48

163

26.8

6.09

34.1

6.57

159

26.5

6.01

34.0

6.48

452C

-0.47% / C-0.34% / C

0.06% / C

20

-40 to +85C

-40 to +60C

25 pcs. / box

50 pcs. / pallet

700 pcs. / 40 ft (H)

60 (6x10) monocrystalline silicon solar cells 156 x 156 mm






IP65 rated



1642 x 994 x 40 mm / 64.2 x 39.1 x 1.6 inches

20 kg / 44.1 lbs


230

31.8

7.23

37.2

8.21

16.56

14.09

167

27.1

6.16

34.3

6.65

235

32.0

7.35

37.2

8.30

16.90

14.40

170

27.3

6.23

34.3

6.72

240

32.2

7.45

37.3

8.39

17.25

14.70

245

32.4

7.56

37.4

8.48

17.51

15.01

174

27.7

6.28

34.3

6.79

178

28.0

6.36

34.4

6.87

250

32.6

7.67

37.5

8.57

17.93

15.32

255

32.8

7.78

37.6

8.66

18.34

16.03

260

33.0

7.88

37.8

8.76

18.70

16.34

181

28.2

6.41

34.5

6.94

185

28.5

6.49

34.6

7.00

188

28.7

6.55

34.7

7.06






TYPE

TYPE

TYPE

TYPE

TYPE








Cell Efficiency

Module Efficiency






NOCT**





Storage Temperature


Quantity/Pallet

Loading Capacity

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

Connector

Cables

Dimension

Weight

Max. Load





225D-20220D-20

225D-20220D-20

LDK-D-20 Series

LDK-D-20 Series

LDK-D-20 Series

230D-20

230D-20

235D-20

235D-20

240D-20 245D-20

240D-20 245D-20

250D-20 255D-20 260D-20

250D-20 255D-20 260D-20

IEC: 1000V / UL: 600 V



25/3625

220D-225D-230D-235D-240D-245D-250D-255D-260D-20


WARRANTIES

CERTIFICATES




classification





UL1703 2002/03/15 Ed:3 Rev: 2004/06/30








DIMENSIONS

R

elativeEfciency


Above graphics according to LDK-220D-20


0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50


4 places

8-8x3Drainage holes

8 places

Junction box


8 places

2-4Ground holes

2 places

1000

800

1300

1642

1642

30

50

171

421

994 40994

3050

956

1.05

1

0.95

0.9

0.85

0.8

200 300 400 500 600 700 800 900 1000

Current

[A]

Irradiance [W/m2]

Voltage [V]


26/3626

170

35.9

4.76

44.0

5.13

15.58

13.32

123

32.6

3.77

40.5

4.15

175

36.1

4.87

44.3

5.21

16.04

13.71

127

33.1

3.83

40.8

4.22

180

36.4

4.96

44.6

5.28

16.49

14.10

130

33.6

3.87

41.1

4.27

452C

-0.47% / C-0.34% / C

0.06% / C

20 A

-40 to +85C

-40 to +60C

25 pcs. / box

50 pcs. / pallet

700 pcs. / 40 ft (H)

72 (6x12) polycrystalline silicon solar cells 125 x 125 mm






IP65 rated



1580 x 808 x 40 mm / 62.4 x 31.8 x 1.6 inches (new dimensions)

15.6 kg / 34.4 lbs


185

36.8

5.02

44.9

5.51

16.95

14.49

134

33.6

3.99

41.3

4.46

190

37.2

5.1

45.1

5.6

17.41

14.88

138

34.1

4.05

41.5

4.53

195

37.5

5.2

45.3

5.69

17.87

15.27

141

34.6

4.1

41.7

4.6

200

37.8

5.3

45.5

5.78

18.33

15.67

145

35

4.16

41.9

4.67






TYPE

TYPE

TYPE

TYPE

TYPE








Cell Efficiency

Module Efficiency






NOCT**





Storage Temperature


Quantity/Pallet

Loading Capacity

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

Connector

Cables

Dimension

Weight

Max. Load





170P-24(s)

170P-24(s)

175P-24(s)

175P-24(s)

180P-24(s)

180P-24(s)

LDK-P-24 Series (s)

LDK-P-24 Series (s)

LDK-P-24 Series (s)

185P-24(s)

185P-24(s)

190P-24(s)

190P-24(s)

195P-24(s)

195P-24(s)

200P-24(s)

200P-24(s)

IEC: 1000V / UL: 600 V



27/3627

170P-175P-180P-185P-190P-195P-200P-24 (S)NEW DIMENSIONS


WARRANTIES

CERTIFICATES




classification





UL1703 2002/03/15 Ed:3 Rev: 2004/06/30








DIMENSIONS

R

elativeEfciency


Above graphics according to LDK-175P-24(s)


40808

1580


4 places

8-8x3Drainage holes


8-14x9

Mounting slots8 places

2-4Ground holes

2 places

950

808770

1580

1300

800

50

5030301

40

390

1.05

1

0.95

0.9

0.85

0.8200 300 400 500 600 700 800 900 1000

0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50

Current

[A]

Irradiance [W/m2]

Voltage [V]


28/3628

215

29.8

7.23

36.3

7.98

15.18

13.17

156

26.3

5.93

33.4

6.46

225

29.9

7.53

36.7

8.24

15.89

13.79

220

29.8

7.40

36.5

8.14

15.53

13.48

163

26.7

6.12

33.8

6.67

159

26.4

6.04

33.6

6.59

452C

-0.47 % / C-0.34 % / C

0.06 % / C

20 A

-40 to +85C

-40 to +60C

25 pcs. / box

50 pcs. / pallet

700 pcs. / 40 ft (H)







IP65 rated



1642 x 994 x 40 mm / 64.6 x 39.1 x 1.6 inches

20 kg / 44.1 lbs


230

29.9

7.68

36.8

8.34

16.24

14.09

167

27.1

6.19

33.9

6.75

235

30.0

7.84

36.8

8.35

16.59

14.40

170

27.4

6.22

33.9

6.76

240

30.0

7.98

36.9

8.35

16.94

14.70

245

30.1

8.14

37.2

8.48

17.29

15.01

174

28.0

6.23

34.0

6.76

178

28.1

6.33

34.3

6.87

250

30.2

8.28

37.5

8.59

17.64

15.32

181

28.2

6.42

34.5

6.95






TYPE

TYPE

TYPE

TYPE

TYPE








Cell Efficiency

Module Efficiency






NOCT**





Storage Temperature


Quantity/Pallet

Loading Capacity

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

Connector

Cables

Dimension

Weight

Max. Load





215P-20

215P-20

225P-20220P-20

225P-20220P-20

LDK-P-20 Series

LDK-P-20 Series

LDK-P-20 Series

230P-20

230P-20

235P-20

235P-20

240P-20 245P-20

240P-20 245P-20

250P-20

250P-20

IEC: 1000V / UL: 600 V



29/3629

215P-220P-225P-230P-235P-240P-245P-250P-20


WARRANTIES

CERTIFICATES




classification





UL1703 2002/03/15 Ed:3 Rev: 2004/06/30






MCS The Microgeneration Certication Scheme UK



DIMENSIONS

R

elativeEfciency


Above graphics according to LDK-220P-20


0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50


4 places

8-8x3Drainage holes

8 places


8 places

2-4Ground holes

2 places

40

421

171

50

1642

1000

800

1300

1642

994994956

30 50

Junction box

1.05

1

0.95

0.9

0.85

0.8

200 300 400 500 600 700 800 900 1000

Current

[A]

Irradiance [W/m2]

Voltage [V]


30/3630

452C

-0.47 % / C-0.34 % / C

0.06 % / C

20 A

-40 to +85C

-40 to +60C

20 pcs. / box

40 pcs. / pallet

440 pcs. / 40 ft (H)


4 mm thick, tempered glass / AR coating glass





IP65 rated



1946 x 976 x 50 mm / 76.6 x 38.4 x 2.0 inches

27.3 kg / 60.2 lbs


270

36.2

7.47

44.2

8.21

16.05

13.87

196

31.8

6.15

40.7

6.65

275

36.2

7.60

44.3

8.28

16.35

14.13

199

32.1

6.21

40.8

6.70

280

36.3

7.72

44.3

8.36

16.66

14.39

285

36.4

7.83

44.4

8.44

16.96

15.00

203

32.4

6.27

40.8

6.77

207

32.8

6.31

40.9

6.81

290

36.5

7.95

44.4

8.52

17.27

15.27

210

33

6.39

40.9

6.91






TYPE

TYPE

TYPE

TYPE

TYPE








Cell Efficiency

Module Efficiency






NOCT**





Storage Temperature


Quantity/Pallet

Loading Capacity

Solar Cells

Front Cover

Back Cover

Encapsulant

Frame

Diodes

Junction Box

Connector

Cables

Dimension

Weight

Max. Load





LDK-P-24 Series (s)

LDK-P-24 Series (s)

LDK-P-24 Series (s)

270P-24(s)

270P-24(s)

275P-24(s)

275P-24(s)

280P-24(s) 285P-24(s)

280P-24(s) 285P-24(s)

290P-24(s)

290P-24(s)

IEC: 1000V / UL: 600 V



31/3631

270P-275P-280P-285P-290P-24 (S)NEW DIMENSIONS


WARRANTIES

CERTIFICATES




classification





UL1703 2002/03/15 Ed:3 Rev: 2004/06/30








DIMENSIONS

R

elativeEfciency


Above graphics according to LDK-270P-24(s)


2-4

1200

50

Ground holes2 places

8-83Drainage holes

8 places

8-149Mounting slots

8 places

Junction box

976924

19461

13001

8001

52

52

40

40

323

573


4 places

976

1946

1.05

1

0.95

0.9

0.85

0.8200 300 400 500 600 700 800 900 1000

0

1

2

3

4

5

6

0 5 10 15 20 25 30 35 40 45 50

Current

[A]

Irradiance [W/m2]

Voltage [V]


32/3632

Designed to meet French certication for 2012

Possible to integrated inpitched roofs with a slope as low

as 4

Solar tiles - simple and fast installation Reliable production and monitoring

European quality

First-class after sales service based in Europe

High-quality mounting system

Excellent adaptability to all kind of roofs

Black anodized module clamps

Longevity of system Reliable production and monitoring

European quality

First-class after sales service based in Europe

Full black laminated modules with CSTB approved system

Suitable to cover almost all types of coverage Roof slope > 4 (within the specifications if < 20)

Landscape oriented modules

Support proles in extruded aluminum alloy (6060 T6)

Custom Flashing System galvanized lacquered 75/100ths

EPDM rubber seals dual hardness

Cooling polymer glass ber reinforced PP

Anti tearing polymer PA

Full Black framed modules

Suitable for most types of roof covering Roof slope up to 60

Wind load Up to 50 m/s

Snow load Up to 1,4 kN/m

Portrait or landscape oriented modules

Roof hooks and fasteners Stainless steel (V2A)

System support rail in extruded aluminium (6063 T6)

RESIDENTIAL KITS

LDK SYSTEMS

As the photovoltaic sector moves towards grid parity economies must be made along the entire value chain. Thats why a large

integrated company like LDK now offers a complete kit for residential, agricultural and small commercial installations.

LDK offers both an in roof, architectural solution for new build and BIPV applications and a high quality on roof solution. LDKs in

roof solution fullfils the French criteria of integration of CEIAB (Comit dEvaluation lIntgration au Bti).

LDK will provide attractive full-black laminates and full-black modules to ensure an attractive look to our installations.

GENERAL CHARACTERISTICS FOR ON ROOF

INSTALLATION:

BIPV ARCHITECTURAL SOLUTIONS ON ROOF QUALITY SOLUTIONS

GENERAL CHARACTERISTICS FOR IN ROOF

INTEGRATION:


33/3633

Every kit consists of the following components:

High performance full black

monocrystalline modules High quality LDK Inverter for standard

configurations

LDK mounting system for both BIPV or

on roof applications

DC cable set

All other accessories: data logger and

display, system documentation

SYSTEM SPECIFICATIONS

ELECTRICAL CHARACTERISTICS:

185

36.9

5.02

45.1

5.48

187.5

37.3

5.04

45.2

5.50

190

37.7

5.05

45.2

5.51

TYPE








185D-24(s) 187D-24(s) 190D-24(s)

IEC: 1000V / UL: 600 V

NEW


34/3634

FINANCIAL SOLUTIONS

SYSTEMS AND PV PROJECTS

LDK IS BUILDING A STRONG PV PROJECTS BUSINESSES BY LEVERAGING A STRONG FINANCINGSOLUTION BACKED BY THE CHINA DEVELOPMENT BANK.

FINANCED BY CDB 42 MW PV PROJECT IN GERMANYCO-FINANCED BY LDK SOLARAND Q-CELLS

Strong nancing support from China Development Bank: 60 bilion credit line

High quality, large volume, low-cost and bankable solar products

Offer nancial support to customer in different markets

Local customer support from local teams

Provide one-stop-shop solar energy solutions and services, which is especially important in less sophisticated emerging markets

Proven business model and track record

Increasing PV projects pipeline

LDKNORTH AMERICA

LDKEUROPE

LDK CHINA

Financial

solution

service

from

1to500

MW


35/36

WE WILL MANAGE

EVEN WITHOUT HELP

UliW

iesmeier/Corbis|melaniazilio.c

om

www.ldksolar.com

SILICON INGOTS WAFERS CELLS MODULES PV SYSTEMS

2 GWfully vertically integrated leading Company from silicon to PV systems


36/36

www.ldksolar.com

HEADQUARTERSJIANGXI LDK SOLAR HI-TECH CO., LTD

LDK Avenue, Economic Development Zone, Xinyu,Jiangxi, 338032 P.R. ChinaPh. +86.790.6669000

LDK SOLAR HI-TECH (SUZHOU) CO., LTD6th Floor 1368 Wuzhong Avenue, WuzhongDistrict, Suzhou City, P.R. China

LDK SOLAR HI-TECH (NANCHANG) SO., LTD.No. 999 Torch Boulevard, Nanchang City, JiangxiProvince, P.R. China

LDK SOLAR USA, INC.1290 Oakmead Parkway, Suite 306, Sunnyvale,

CA 94085 - USAPh. +1.408.2450858 - [email protected]

LDK SOLAR EUROPE HOLDING S.A12F Rue Guillame Kroll, L-1882 Luxembourg

LDK SOLAR ITALYVia S. Martino, 2531020 San Zenone degli Ezzelini, Treviso - ItalyPh. +39.0423.948833

Via Giulio Cesare Procaccini, 4820154 Milano - ItalyPh. +39 02 [email protected]

LDK SOLAR GERMANYLandsberger Strasse 302 80687 Munich - GermanyPh. +49.90405.276 - [email protected]

LDK SOLAR UKPh. +44.787.5685085 - [email protected]

Date post:	04-Jun-2018
Category:	Documents
Upload:	mediahelpdesk
View:	249 times
Download:	0 times

LDK Solar Cell

Documents