Learn from the best at the IHEA Fall Seminars
October 8-10, 2018Indiana Convention Center | Indianapolis, IN
IN CONJUNCTION WITH FURNACES NORTH AMERICA
Combustion Seminar
Safety Standards & Codes Seminar
Induction Seminar
www.ihea.org
combustion seminar
October 8 - 10
Long the industry’s premier seminar for industrial process heating professionals, this two-day event offers attendees the chance to learn the latest in combustion technology and visit with industry suppliers. The IHEA Combustion Seminar is designed for persons responsible for the operation, design, selection and/or maintenance of fuel-fired industrial process furnaces and ovens.
Monday, October 8 | 9:00 AM - 5:30 PMSESSION 1 - Fundamentals of Combustion
SESSION 2 - Burners and Nozzles
SESSION 3 - Practical Fluid Flow & Piping Practices for Combustion Systems
SESSION 4 - The Basics of IR
SESSION 5 - Radiant Tube Burner Concepts
SESSION 6 - Fuel/Air Ratio Control
SESSION 7 - Flame Safety and Sequence Control
SESSION 8 - Combustion System Safety
SESSION 9 - Workshop Problem and Solution
FNA Kick Off Welcome Reception | 6:00 - 8:00 PM
Tuesday, October 9 | 8:00 - 11:30 AMSESSION 10 - Enhanced Combustion Efficiency
SESSION 11 - Heat Application - Low Temperature
SESSION 12 - Heat Application - High Temperature
SESSION 13 - Combustion Troubleshooting
FNA Expo Open | 11:30 AM - 5:30 PM
Wednesday, October 10 | 8:00 - 11:30 AMSESSION 14 - Optimizing Combustion Systems Performance
SESSION 15 - Furnace and Process Controls
SESSION 16 - IR Applications
SESSION 17 - Combustion Systems and the Environment
SESSION 18 - Panel Discussion - System Maintenance
FNA Expo Open | 11:30 AM - 2:30 PM
Course Outline
seminar feesThis fee includes tuition; all seminar handout materials in both hard copy format and on a flash drive; a copy of IHEA’s Infrared Handbook, refreshment breaks on all three days; lunch on Monday only; admission to FNA Expo. Upon completion of the course, seminar attendees are awarded a certificate and 12 Professional Development Hours.
Multiple Registration DiscountFor companies sending more than one person to the seminar, each additional registrant will receive a $125 discount. In order to receive the discount, you MUST register all attendees at the same time on-line.
CancellationIn order to receive a refund of registration fees minus a 10% processing fee, cancellation must be received in writing and acknowledged by the seminar management at least 21 days prior to the event. There will be no refunds issued for any cancellations received within 21 days of the event.
$700 for IHEA Members ♦ $875 for Non-Members
click here to register now
www.ihea.org
Instructors for this seminar include experts from:Advanced EnergyBloom Engineering Co., Inc.Fostoria Process Equipment, Div. of TPI Corp.HEAT Combustion SolutionsHoneywell Thermal SolutionsSCC Inc.Selas Heat Technology Co.Surface CombustionWS Thermal Process Technology
SAFETY Standards & Codes seminar
October 8 - 10
Explosions and fires in industrial heating systems can result in injury or loss of life, and loss of property and production. Understanding the proper use of National Standards governing the compliant design and operation of ovens & furnaces is essential for everyone involved with this type of equipment.
IHEA’s Safety Standards & Codes seminar is designed for individuals involved in the design, manufac-ture, service or operation of ovens, furnaces, kilns, dryers, thermal oxidizers and a wide range of indus-trial applications. The Safety Standards Seminar provides a comprehensive review of the 2019 edition of NFPA 86.
Course Outline
seminar feesThis fee includes tuition; all seminar handout materials in hard copy format; refreshment breaks on all three days; lunch on Monday only; admission to FNA Expo. Upon completion of the course, seminar attendees are awarded a certificate and 12 Professional Development Hours. Attendees will also receive a printed copy of the NEW 2019 NFPA 86 Standard
Multiple Registration DiscountFor companies sending more than one person to the seminar, each additional registrant will receive a $125 discount. In order to receive the discount, you MUST register all attendees at the same time on-line.
CancellationIn order to receive a refund of registration fees minus a 10% processing fee, cancellation must be received in writing and acknowledged by the seminar management at least 21 days prior to the event. There will be no refunds issued for any cancellations received within 21 days of the event.
Monday, October 8 | 9:00 AM - 5:30 PMSESSION 1 - Introduction & Overview of NFPA 86 Standards for Ovens and FurnacesSESSION 2- Gas Line Evacuation (Purging) and ChargingSESSION 3 - General, Location and ConstructionSESSION 4 - Furnace Heating Systems including Class B Furnace ConsiderationsSESSION 5 - Safety Equipment & Application Including Safety Shutoff ValvesSESSION 6 - Safety Equipment & Application Including Safety Controls & DevicesSESSION 7 - Class A Ovens and FurnacesSESSION 8 - Thermal Oxidizers
FNA Kick Off Welcome Reception | 6:00 - 8:00 PM
Tuesday, October 9 | 8:00 - 11:30 AMSESSION 9 - Introduction to Safety Equipment & Application Including Programmable Logic Controller SystemSESSION 10 - Special Atmoshpheres for Class C Ovens & FurnacesSESSION 11 - Class C Furnaces: Quench & Molten Salt Bath
FNA Expo Open | 11:30 AM - 2:30 PM
Wednesday, October 10 | 8:00 - 11:30 AM SESSION 12 - Commissioning, Operations, Maintenance, Inspection & TestingSESSION 13 - AuditingSESSION 14 - Loss Prevention: An Insurer’s Perspective
FNA Expo Open | 11:30 AM - 2:30 PM
Instructors for this seminar include experts from:• Fireye• Honeywell Thermal Solutions• Karl Dungs, Inc.• S-afe, Inc• SCC Combustion• Surface Combustion • Tokio Marine America Insurance Co.• Zurich Services Corp.
$700 for IHEA Members ♦ $875 for Non-Members
click here to register now
www.ihea.org
Speakers will discuss changes in the 2019 NFPA standard to be
released this Fall..
inductionseminar
October 9 | 8:00 - 11:30 AM
IHEA is pleased to have the input of several induction authorities who have contributed to the revised Induction Seminar in order to provide a complete understanding of the technology. Attendees will learn about the basics of induction technology; equipment needed for an induction operation; induction processes, applications and markets; advantages of induction for improving plant operations, and what is needed to set up an induction operation. Seminar speakers are IHEA members and leaders in the induction industry. If you are using induction and want to get an update on the latest knowledge or if you are considering using induction, this will be a great seminar for your team. From safety to applications to installations and maintenance, this seminar will give a great update on induction technology.
Course Outline
seminar feesThis fee includes tuition; all seminar handout materials in hard copy format; refreshment breaks; admittance to FNA Expo. Upon completion of the course, seminar attendees are awarded a certificate and 4 Professional Development Hours.
Multiple Registration DiscountFor companies sending more than one person to the seminar, each additional registrant will receive a $25 discount. In order to receive the discount, you MUST register all attendees at the same time on-line.
CancellationIn order to receive a refund of registration fees minus a 10% processing fee, cancellation must be received in writing and acknowledged by the seminar management at least 21 days prior to the event. There will be no refunds issued for any cancellations received within 21 days of the event.
Tuesday, October 9 | 8:00 - 11:30 AM
SESSION 1 - Induction 101: Basics, Applications, and Things to Consider
SESSION 2 - Induction Coil Overview
SESSION 3 - Utilities & Harmonics - Myths & Facts About Induction
SESSION 4 - Induction: Market Studies, Segment Growth, and Industry Trends
FNA Expo Open | 11:30 AM - 2:30 PM
$150 for IHEA Members ♦ $200 for Non-Members
click here to register now
www.ihea.org
Instructors for this seminar include experts from:
• Advanced Energy
• Ajax Tocco Magnethermic
• EPRI
• Taylor-Winfield Technologies Inc.
October 8 - 10 Indiana Convention Centerwww.furnacesnorthamerica.com
This year, IHEA’s Combustion, Safety Standards & Codes and Induction Seminars are being held in conjunction with Furnaces North America 2018. Your registration for any of the three seminars includes admission to the FNA show floor. The seminar schedule is arranged to allow you ample time to visit the show floor, where you’ll find many IHEA members and seminar speakers’ companies.
Venueinformation
Indianapolis Convention CenterIndianapolis, IN
Hotel Overflow Hotel Rate at both hotels: $185 Indianapolis Marriott Downtown The Westin Indianapolis 350 West Maryland Street 241 W. Washington St.Indianapolis, IN 46225 Indianapolis, IN 46204
Click on the name of the hotel above to make reservations on-line. Reservations must be made by Monday, September 10 to receive the Furnaces North America group rate.
Both hotels are located across the street from the Indiana Convention Center and within walking distance to many restaurants.
register now at www.ihea.org
Sponsors
Combustion Seminar Flash Drive Sponsor
Combustion Seminar Literature Tables
HeatTreatTodayTechnology, Tips & News for Manufacturers with In-House Heat Treat
Safety Standards & Codes Seminar Literature Table
HeatTreatTodayTechnology, Tips & News for Manufacturers with In-House Heat Treat
Induction Seminar Literature Tables
HeatTreatTodayTechnology, Tips & News for Manufacturers with In-House Heat Treat