LED CEILING & WALL LIGHTING A range of Ceiling & Wall lights providing solutions for most internal & external lighting projects ETERNAPRO 5 YEAR WARRANTY n LED Low Bay Range Page 20 n LED High Bay Range Coming Soon n LED Colour Selectable Carina Lights Page 21 n LED Circular Or Square Utility Lights Page 22 n LED Full, Eyelid Or Grill Aluminium Wall Lights Page 23 n LED Panels In Standard & Dimmable Page 26 n LED Panels In UGR<19 & UGR<19 Dimmable Page 27 2 YEAR WARRANTY n LED Standard / Eyelid Diffuser Amenity Lights + Mini Versions Page 24 n LED Battens Page 24 n LED Oval Bulkhead Fittings Page 25 n LED Slimline Carina Lights Page 25 STANDARD LED Ceiling / Wall Light Page 25 LED Internal Ceiling / Wall Light Page 25 LED Bathroom Ceiling / Wall Light Page 25 Warranty Subject to T&C’s EternaPro Extended Warranty Available on application PAGE 19 www.eterna-lighting.co.uk LED Ceiling & Wall Lighting
Transcript
LED CEILING& WALL LIGHTINGA range of Ceiling & Wall lights providing solutions
for most internal & external lighting projects
ETERNAPRO 5 YEAR WARRANTYn LED Low Bay Range Page 20n LED High Bay Range Coming Soon
n LED Colour Selectable Carina Lights Page 21n LED Circular Or Square Utility Lights Page 22n LED Full, Eyelid Or Grill Aluminium Wall Lights Page 23n LED Panels In Standard & Dimmable Page 26n LED Panels In UGR<19 & UGR<19 Dimmable Page 272 YEAR WARRANTYn LED Standard / Eyelid Diffuser Amenity Lights + Mini Versions Page 24n LED Battens Page 24n LED Oval Bulkhead Fittings Page 25n LED Slimline Carina Lights Page 25STANDARDLED Ceiling / Wall Light Page 25LED Internal Ceiling / Wall Light Page 25LED Bathroom Ceiling / Wall Light Page 25
WarrantySubject to T&C’s
EternaPro
Extended WarrantyAvailable on application
PAG
E 19
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Cei
ling
& W
all L
ight
ing
IP40 LED LOW BAY RANGEALL FITTINGS: Black / 4000K / 35,000 hrs / IP40 / A+ Rated
Not just a low bay!! Although suitable for use as low bay for warehouse lighting the aesthetic design also lends itself to installation in public areas. IES files available to enable lighting plans. • Frosted polycarbonate diffuser• Aluminium housing• Suspension pack included, max length 1.5m• Brackets available separately (LBB range) for
surface mounting or to enable installation with threaded rod
LEDLBAY50 shown with the supplied suspension kit (max. cable length 1500mm approx)
Frosted polycarbonate diffuser
LEDLBAY80
LEDLBAY50 with LBB3050 (Bracket)
EternaPro
Extended Warranty
Available on application81
mm
30W: 371mm50W: 522mm80W: 820mm
120W: 1220mm
103mm
PAG
E 20
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Cei
ling
& W
all L
ight
ing
IP65 LED COLOUR TEMPERATURE SELECTABLE FITTINGSALL FITTINGS: 17W / 35,000 hrs / IP65 / A Rated
3100K • 1250 lm 4200K • 1350 lm 6400K • 1300 lm
Code ColourSTANDARD
CSLEDCR Polished ChromeCSLEDWH White
EMERGENCYCSLEDCREM3 Polished ChromeCSLEDWHEM3 White
ON/OFF MICROWAVE SENSORMSCSLEDCR Polished ChromeMSCSLEDWH White
ON/OFF MICROWAVE SENSOR + EMERGENCY
MSCSLCREM3 Polished ChromeMSCSLWHEM3 White10% STEP DIM (CORRIDOR MODE)
MICROWAVE SENSORSDCSLEDCR Polished ChromeSDCSLEDWH White
10% STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR
+ EMERGENCYSDCSLCREM3 Polished ChromeSDCSLWHEM3 White
EternaPro
Extended WarrantyAvailable on application
ALL FITTINGS:• Colour temperature selectable - options of 3100K, 4200K & 6400K easily
set by a dip switch on the gear tray• Full circular LED array • Polycarbonate construction • IP65, ceiling or wall mounted• Plug in connector between the terminal block and the gear tray. Terminal block is located on the
base, allowing for easy wiring and the gear tray to be removed during installation• M.O.M: 1 / O.P.Q: 8
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be configured for non maintained operation
STANDARD ON/OFF MICROWAVE SENSOR VERSIONS:• Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100%
and time 5 secs - 15 mins• The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no
compromise to the appearance of the fitting or the room design
STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR VERSIONS:• Operation at 100% light level after last presence detection, reducing to 10% light output after
installer selected time delay• Delay time to 10% operation adjustable: 5 sec 30 sec 1 min 5 min 15 min 30 min• 30~150° detection angle• 12~18m adjustable detection range: 100% 75% 50% 25% 10%• Daylight sensitivity adjustment: 2Lux 5Lux 10Lux 30Lux 50Lux Photocell Disable• Detection is possible through doors, glass panels and thin walls
110m
m
325mm
= ON = OFF
Standard shown
PAG
E 21
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Cei
ling
& W
all L
ight
ing
IP65 LED UTILITY FITTINGS WITH OPAL OR PRISMATIC DIFFUSERALL FITTINGS: 18W / 4000K / 35,000 hrs / IP65 / A+ Rated
• Hinged gear tray• Captive fixing screws• Four 20mm cable entries on the side and one to the rear
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be
configured for non maintained operation
MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted)
MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off
after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes
• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level
• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off
High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options.
ALMF3BKFUL Black Multi-function MW Sensor + EmergencyALMF3WHFUL White
EYEL
ID
ALSTDBKEYE BlackStandard
1300 lm
ALSTDWHEYE White
ALEM3BKEYE BlackEmergency
ALEM3WHEYE White
ALMFBKEYE BlackMulti-function MW Sensor
ALMFWHEYE White
ALMF3BKEYE Black Multi-function MW Sensor + EmergencyALMF3WHEYE White
GRI
LL
ALSTDBKGRI BlackStandard
1400 lm
ALSTDWHGRI White
ALEM3BKGRI BlackEmergency
ALEM3WHGRI White
ALMFBKGRI BlackMulti-function MW Sensor
ALMFWHGRI White
ALMF3BKGRI Black Multi-function MW Sensor + EmergencyALMF3WHGRI White
Modern and robust design with options including full, eyelid and grill case, black and white finish, and standard, emergency, multi function
microwave and multi function microwave emergency.
Full
Eyelid
Grill
ALSTDWHGRI shown
Ø 365m
m
FULL: 100mmEYE: 120mm
GRILL: 130mm
• Die-cast aluminium base and bezel • Polycarbonate diffuser• Full circular/eyelid LED array• Plug in connector between the terminal block and the gear
tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation
• Four 20mm cable entries• Tamper-proof, captive, stainless steel allen key screws• M.O.M: 1 / O.P.Q: 1
EMERGENCY VERSIONS:• 3 hour maintained mode as standard which
can also be configured for non-maintained operation
MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted) MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off
after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes
• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level
• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off
EternaPro
Extended Warranty
Available on application
Standard push fit terminal block
PAG
E 23
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Cei
ling
& W
all L
ight
ing
IP66 LED STANDARD / EYELID DIFFUSER AMENITY CEILING / WALL LIGHTS
IP66 LED MINI AMENITY FITTINGS
ALL FITTINGS: 12W / 4200K / 800 lm / 25,000 hrs / IP66 / A Rated
ALL FITTINGS: 6W / 4200K / 35,000 hrs / IP66 / A Rated
Long life, energy efficient utility fitting perfect for domestic or commercial settings including perimeter lighting, paths, gardens and porches, communal areas, staircases and many more. • Polycarbonate / ABS construction• Multiple low power LED array & optically optimised
diffuser: ensures a soft, even lighting effect with no degradation of light output
• Stainless steel screws• 4200K colour temperature: for bright neutral white
MICROWAVE VERSIONS:• Adjustable microwave sensor: with options to adjust
2-50 lux or disable, detection range 10-100% and time 5 secs - 15 mins
• The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no compromise to the appearance of the fitting or the room design
Code Diffuser Colour
SHFULLBKStandard
Black
SHFULLWH White
SHEYEBKEyelid
Black
SHEYEWH White
MICROWAVE VERSIONS BELOW:
SHFULLMWBKStandard
Black
SHFULLMWWH White
SHEYEMWBKEyelid
Black
SHEYEMWWH White
305m
m
95mm
WarrantySubject to T&C’s
Standard Diffuser
Eyelid Diffuser
Long life, energy efficient utility fitting perfect for domestic or commercial settings including pathway illumination, gardens and porches, staircases and many more. • Polycarbonate construction• Multiple low power LED array & optically
optimised diffuser: ensures a soft, even lighting effect with no degradation of light output
• Instant start to full illumination level• Stainless steel screws• 4200K colour temperature: for bright neutral
white appearance• IP66 ceiling or wall mounted: giving versatile
fixing options suitable for bathroom, internal and external use
• M.O.M: 1 / O.P.Q: 10
Code Diffuser Colour
MINIFULLBK Standard380 lm
Black
MINIFULLWH White
MINIEYEBK Eyelid330 lm
Black
MINIEYEWH White
215m
m
80mm
200m
m
80mmStandard Diffuser
Eyelid Diffuser
WarrantySubject to T&C’s
IP20 LED SLIMLINE BATTENSALL FITTINGS: White / 4000K / 20,000 hrs / IP20 / A+ Rated
• Polycarbonate and aluminium construction
• Low energy alternative to a standard fluorescent batten
• Ultra-bright LEDs: low power consumption with enhanced life expectancy
• Slim design: offers a more stylish and modern solution to traditional battens
• 4000K colour temperature: for neutral white appearance
• M.O.M: 1 / O.P.Q: 20
Code Length Wattage Lumens
T8LED16 900mm / 3ft 16W 1280 lm
T8LED20 1200mm / 4ft 20W 1600 lm
T8LED24 1500mm / 5ft 24W 2100 lm
45m
m
T8LED16: 900mmT8LED20: 1200mmT8LED24: 1500mm
30mm
WarrantySubject to T&C’s
Snap in fixing clips for easy installation
PAG
E 24
ww
w.e
tern
a-lig
htin
g.co
.uk
LED
Cei
ling
& W
all L
ight
ing
IP65 LED CIRCULAR SLIMLINE CEILING / WALL FITTINGS
This stylish fitting is ideal for installation in a multitude of situations. Ceiling or wall mounted in a domestic or commercial setting and suitable for bathrooms. Long life, energy efficient alternative to traditional fluorescent luminaires. • Multiple low power LED array & optically optimised diffuser: ensures a
soft, even lighting effect with no degradation of light output• Corrosion resistant stainless steel fixing screws• Suitable for bathroom use• 3100K warm colour temperature: offering a pleasing light appearance• M.O.M: 1 / O.P.Q: 5
80m
m
40m
m
305mm
Code
PACIFIC12
Code
STANDARD
SLIMLEDCR Polished Chrome
SLIMLEDWH White
ON/OFF MICROWAVE SENSOR
MWSLIMLCR Polished Chrome
MWSLIMLWH White
ALL FITTINGS:• Full circular LED array • Polycarbonate construction• Plug in connector between the
terminal block and the gear tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation
with options to adjust 2-50 lux or disable, detection range 10-100% and time 5 secs - 15 mins
• The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no compromise to the appearance of the fitting or the room design
LED 600X600mm SLIM PANEL LIGHTSBOTH FITTINGS: White / 40W / 4000K / 3100 lm / 35,000 hrs / A Rated
• For switch/push dimming use with a mains voltage ‘push to make’ / retractive wall switch
• For 1-10V dimming use with a standard 1-10V compatible rotary dimmer. If using a rotary dimmer to turn the panel on/off ensure the dimmer has on/off function
• Max 50m distance from the last driver to the dimming control device• Up to 20 fittings can be installed on each circuit
(‘PUSH TO MAKE’ FUNCTIONALITY):• Push and hold the switch to increase the light level to the highest
point. Release the switch and then push and hold again to dim through to the lowest point
• Release the switch when the desired lighting level is achieved• Short press and release turns the light off• When the light is off, a short press and release turns the light back
on again at the same level as when turned off
DIMMABLE PANEL:EternaPro
Extended WarrantyAvailable on application
• Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to standard fluorescent panels
• Ultra slim profile and a white trim finish: compliments a multitude of surroundings
• CRI Ra:≥80: high CRI to minimise colour distortion of illuminated products
• Compatible with panel accessories EBPM3 and SUSPACK opposite
Code
PLED1200
EternaPro
Extended Warranty
Available on application
• Low glare and even shadow free light distribution ensures suitability for a variety of applications: visually superior to standard fluorescent panels
• 4000K colour temperature, edge lit: offering a pleasing lighting effect• Ultra slim profile and a white trim finish to match the majority of T. bar
ceilings• CRI Ra:≥80: High CRI to minimise colour distortion of illuminated
products• Compatible with panel accessories SURFMK, EBPM3 and SUSPACK
opposite• M.O.M: 1 / O.P.Q: 5
Code Version
PAN600 Standard
DIMPAN Dimmable
This light panel is designed to fit into the space normally occupied by a standard 600mm x 600mm
ceiling tile, it is therefore a direct replacement for traditional modular
fluorescent fittings used in many offices and commercial applications.
EBPM3 - Emergency Battery Pack• 3 hours duration in emergency mode • LED charge light• Enables LED commercial downlights and LED panel lights to be
converted into emergency luminaires, rated at 65W max• Push fit plug and socket: allows quick & easy installation• Facility for non maintained mode and for remote switching• Control gear can be removed from the housing: allows use in
SUSPACK - Suspension Kit• Enables suspension from wires• 2 x kits required for PLED1200• Cable length: 1m• 940mm max. suspension height drop• M.O.M: 1 / O.P.Q: 100
SURFMK - Surface Mounting Kit• Suitable for 600x600mm panels• Supplied in kit form• M.O.M: 1 / O.P.Q: 20
250mm 55mm
110m
m
LED PANEL ACCESSORIES
Code Version
PANELUGR19 Standard
DIMPANUGR Dimmable
• Low glare UGR ≤19 panel which aids LG7 compliance
• 4000K colour temperature, edge lit with even shadow free light distribution
• Ultra slim profile and a white trim to match the majority of T. bar ceilings
• CRI Ra:≥80: High CRI to minimise colour distortion of illuminated products
• Compatible with panel accessories SURFMK, EBPM3 and SUSPACK below
• M.O.M: 1 / O.P.Q: 5
This LED edge lit panel is an ideal solution for office lighting, educational premises and wherever
minimised glare is required.
Designed with optical glare control to assist with LG7 workplace guidelines and compliant to display screen equipment requirements within EN 12464 providing UGR < 19 in any room size and CRI > 80, it is available
with recessed, surface and suspended mounting options.
![Untitled-2 [img.staticmb.com] · & Ceiling paint Floor Wall & Ceiling Finish Wall & Ceiling Paint C P Fittings Sanitary Ware Railing Floor & Ceiling Finish wall & ceiling Paint Counter](https://static.documents.pub/doc/80x56/5e991324e4b32f18a95c130e/untitled-2-img-ceiling-paint-floor-wall-ceiling-finish-wall-.jpg)
