+ All Categories
Home > Documents > LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and...

LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and...

Date post: 11-Sep-2021
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
5
Project: Type: Date: Notes: RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 1 02 | 2021 DESCRIPTION: 5 Y E A R W A R R A N T Y W E T L O C A T I O N A P P RO V E D F O R IP65 R A T E D SPECIFICATIONS 1 Watts 100 Lumens 13128 Efficacy (Lm/W) 131.3 Replaces Up To 250W MH Colour Temp 4000K, 5000K Certifications cULus, IP65, Wet Location, DLC Premium Operating Temp -40˚C to +40˚C Voltage 120-277, 347 Beam Pattern T3 - Type III T5 - Type V Total Harmonic Distortion 15% Power Factor 0.9 Mounting Options Yoke, Trunnion, Slip fitter, Slip fitter with Wall Adapter, Mounting Arm for Round or Square Poles. Controls Motion sensor, photocell, 3/7 pin receptacle FL5S-LED100 LED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1 The above specs apply to the standard product configuration. For spec information on other product configurations please see page 2. The FLS-LED series is a versatile, cost effective, area/ flood light that can suit a variety of applications such as parking lots, building facades, car dealerships. FEATURES: Universal Mounting – Yoke, Trunnion, Slip fitter, Slip fitter with Wall Adapter, Mounting Arm for Round or Square Poles. Mounting system to be ordered separately. Rugged Design - Die cast aluminum housing with polycarbonate lens. High Efficacy – 131 lumens per watt. Easy to Install – 1 meter power cord and low voltage dimming cord. Mounting system slides in place and is secured with 2 bolts. Motion sensor, photocell, 3/7 pin receptacles are optional. 0 – 10V dimming is standard. Yoke Slip fitter with wall adaptor Trunnion Slip fitter Mounting arm for round or square poles
Transcript
Page 1: LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1The above specs apply to the standard product configuration. For spec information

Project: Type: Date: Notes:

RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 102 | 2021

DESCRIPTION:

5YEA

R WARRA

NT

YWE

T LO CATION

AP

PROVED FOR

IP65RATED

easy

INSTALLATIO

N

IN

STALLATION

SPECIFICATIONS1

Watts 100

Lumens 13128

Efficacy (Lm/W) 131.3

Replaces Up To 250W MH

Colour Temp 4000K, 5000K

Certifications cULus, IP65, Wet Location, DLC Premium

Operating Temp -40˚C to +40˚C

Voltage 120-277, 347

Beam Pattern T3 - Type III T5 - Type V

Total Harmonic Distortion 15%

Power Factor 0.9

Mounting OptionsYoke, Trunnion, Slip fitter, Slip fitter with Wall Adapter, Mounting Arm for Round or Square Poles.

Controls Motion sensor, photocell, 3/7 pin receptacle

FL5S-LED100 LED Flood Light

Applications: Building facades, car dealerships, parking lots and more.

1The above specs apply to the standard product configuration. For spec information on other product configurations please see page 2.

The FLS-LED series is a versatile, cost effective, area/flood light that can suit a variety of applications such as parking lots, building facades, car dealerships.

FEATURES:

• Universal Mounting – Yoke, Trunnion, Slip fitter, Slip fitter with Wall Adapter, Mounting Arm for Round or Square Poles. Mounting system to be ordered separately.

• Rugged Design - Die cast aluminum housing with polycarbonate lens.

• High Efficacy – 131 lumens per watt.

• Easy to Install – 1 meter power cord and low voltage dimming cord. Mounting system slides in place and is secured with 2 bolts.

• Motion sensor, photocell, 3/7 pin receptacles are optional.

• 0 – 10V dimming is standard.

Yoke Slip fitter with wall adaptor

Trunnion Slip fitter Mounting arm for round or square poles

Page 2: LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1The above specs apply to the standard product configuration. For spec information

RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 202 | 2021

FL5S-LED100LED Flood Light

DESCRIPTION VOLTAGE (V) INPUT POWER (W)

LIGHT OUTPUT (LM)

EFFICACY (LM/W)

THD (%) PF CCT

(K) B-U-G

FL5S-LED100-B-4K-T5-XXX-DIM-[DMS;PC;Blank] 120-277 100 13128 131.3 15.0 0.900 4000 3-0-2

FL5S-LED100-B-4K-T3-XXX-DIM-[DMS;PC;Blank] 120-277 100 12998 130.0 15.0 0.900 4000 3-0-2

FL5S-LED100-B-5K-T5-XXX-DIM-[DMS;PC;Blank] 120-277 100 13255 132.6 15.0 0.900 5000 3-0-2

FL5S-LED100-B-5K-T3-XXX-DIM-[DMS;PC;Blank] 120-277 100 13126 131.3 15.0 0.900 5000 3-0-2

FL5S-LED100-C-4K-T5-XXX-DIM-[DMS;PC;Blank] 347 102 13753 134.7 15.0 0.900 4000 3-0-2

FL5S-LED100-C-4K-T3-XXX-DIM-[DMS;PC;Blank] 347 102 13766 135.4 15.0 0.900 4000 3-0-2

FL5S-LED100-C-5K-T5-XXX-DIM-[DMS;PC;Blank] 347 102 13889 136.1 15.0 0.900 5000 3-0-2

FL5S-LED100-C-5K-T3-XXX-DIM-[DMS;PC;Blank] 347 102 13924 137.0 15.0 0.900 5000 3-0-2

Legend:B - 120V–277V, C-347V 4K - 4000K, 5K - 5000K T3 - TYPE 3 BEAM, T5 - TYPE 5 BEAM XXX - HOUSING FINISH DIM - 0-10V DIMMING

FULL SPECIFICATIONS:

AMPERAGE DRAW & SURGE PROTECTION

Current (A) Surge Protection (kV)

120V 208V 240V 277V 347V 120-277V 347V

FL5S-LED100 0.88A 0.51A 0.44A 0.38A 0.31A 6kV 10kV

WEIGHT AND EPA

Weight (lbs) 0° Tilt 45° Tilt 90° Tilt

FL5S 9.3 0.47 1.22 1.61

LUMEN MAINTENANCE

50,000 Hours 75,000 Hours 100,000 Hours

FL5S-LED100 88% 83% 78%

Page 3: LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1The above specs apply to the standard product configuration. For spec information

RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 302 | 2021

FL5S-LED100LED Flood Light

DIMENSIONS:

FL5S-LED100

YOKE MOUNT

TRUNNION MOUNT

2.604in66mm

12.606in320mm

12.283in312mm

15.222in387mm

1.772in45mm

2.604in66mm

13.414in341mm

.866in22mm

2 x.394in10mm

2 x.394in10mm

.394in10mm

5.512in140mm

2.362in60mm

4.724in120mm

16.919in430mm

4.628in118mm

2.604in66mm

12.606in320mm

2 x.551in14mm

.846in22mm

.673in17mm

3.346in85mm

2.000in51mm

Page 4: LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1The above specs apply to the standard product configuration. For spec information

RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 402 | 2021

FL5S-LED100LED Flood Light

DIMENSIONS:

SLIP FITTER

SLIP FITTER WITH WALL ADAPTOR

MOUNT

MOUNTING ARM FOR ROUND OR SQUARE POLES

20.998in533mm

8.681in221mm

3.012in77mm

2.581in66mm ID

12.606in320mm

21.509in546mm

9.193in234mm

6.126in156mm

2.368in60mm

3.291in84mm

12.606in320mm

A

2.520in64mm

FOR ROUND POLE

DETAIL ASCALE 1 : 2

5.118in130mm

.372in9mm

1.721in44mm

.929in24mm

[.346in]2 x 9mm

[.629in]16mm

[.787in]20mm

18.291in465mm5.955in151mm

6.102in155mm

3.110in79mm

2.368in60mm

12.606in320mm

A

2.520in64mm

FOR ROUND POLEDETAIL A

SCALE 1 : 2

.366in9mm

5.112in130mm

.929in24mm

[.354in]2 x 9mm

[.787in]20mm

[.551in]14mm

Page 5: LED Flood LightLED Flood Light Applications: Building facades, car dealerships, parking lots and more. 1The above specs apply to the standard product configuration. For spec information

RAB DESIGN LIGHTING INC. | 1-222 Islington Avenue. Toronto, ON, M8V 3W7 | 1-800-268-0381 | rabdesign.ca 502 | 2021

FL5S-LED100LED Flood Light

Ordering Guide For AccessoriesCheck the items that you wish to order:

082748 - FL5S/FL6S YOKE BRZ

082750 - FL5S/FL6S/FL8S/FL9S SLIP FITTER BRZ

082751 - FL5S/FL6S/FL8S/FL9S TRUNNION BRZ

082762 - FL5S/FL6S/FL8S/FL9S MOUNTING ARM BRZ

082763 - FL5S/FL6S/FL8S/FL9S SLIP FITTER W/WALL ADAPTER BRZ

FL5S-LED100

ORDERING GUIDE:

Voltage

B - 120-277V

C - 347V

Colour Temp.

5K - 5000K

4K - 4000K

Beam

T5 - Type 5

T3 - Type 3

Finish

BRZ - Bronze

CC - Custom

Driver

DIM - 0-10V Dimming

Controls*

PC - Photocell

DMS - Dimmable Motion Sensor

3PIN - 3 Pin receptacle for ON/OFF photocells

7PIN - 7 pin receptacle for smart control

systems

Misc.

SP10 - 10kV Surge

Protection

*all controls are factory installed


Recommended