LED for liveable cities -...

LED for liveable citiesBringing the city to life with the power of light

LED for liveable cities2 LED for liveable cities 3

The Philips Lighting differenceWe believe in creating innovative outdoor solutions that beautify and inspire. At the same time we also respect the delicate balance that exists between the identity of a city and the needs of its residents. Our expertise and unrivalled knowledge has enabled us to develop LED lighting solutions that are practical and beautiful, but also energy efficient and sustainable. Solutions that make cities more liveable while still respecting the planet.

A responsible choiceIt’s well known that inefficient lighting depletes our planet’s precious resources and that emissions can affect the quality of air that we breathe. But it’s also important to understand

the impact of artificial light on our sleep and other natural processes that affect our quality of life as a whole. By limiting light to when and where it’s needed, our solutions help you to reclaim ‘dark skies’ for the sake of beauty, natural rhythms and conservation.

Better experiences, better livesOn the pages that follow you’ll find out how Philips can help you to create engaging environments, clear, de-cluttered spaces and secure and beautiful LED-lit streets. We’re committed to helping cities build an image of livability and vitality. Invigorating skylines without high energy use and helping people to do more by using less. We know you are too.

From left top to right: Magdenburg, Germany / Valladolid, Spain / Ministerlaan, Eindhoven, the Netherlands / Fyn, Denmark

Cities want to create an identity, branding themselves as unique, beautiful and secure places.High-quality white light can transform the night scene, enhancing urban architecture and creating aninviting ambience that encourages more people to spend time there. It also prevents accidents and makes our roads safer. Philips can help you make the switch to LED easier than you could possibly imagine, enhancing life in the city with the power of light.

LED lighting Philips - partner for cities


Introducing LEDsHighly efficient, long lasting, environmentally friendly and controllable, LEDs have opened up a whole new world of possibilities for lighting. Over the last decade, advances in technology have taken place at the speed of light, enabling you to light exciting spaces and create flexible ambiences with high intensity, white or coloured light. All with a fraction of the energy consumption of conventional lighting techniques.

LED outdoor lightingUntil recently, LED systems were only suitable for narrow streets, limiting their use in other urban lighting schemes. Now, thanks to breakthroughs in lighting technology, LEDs can provide uniform illumination for residential streets going up to >15m width, all depending on light levels required. White light that’s clear and comfortable with perfect colour rendering and no glare, making our cities feel safe and look more attractive.

Saving energyBut LED light isn’t just aesthetically pleasing. The technology is extremely energy-efficient, delivering white light of consistent high quality, brightness and intensity, whilst cutting energy costs by up to 70%. LED sources also have an extremely long life, thereby eliminating the sort of maintenance and replacement required by traditional lighting. A ready-to-use, future-proof solution that will pay for itself within the lifetime of the light source.

Sustainable solutionsSustainability and respect for the environment are our core values. That’s why our LED solutions aren’t just low on energy use; they’re also support sustainable design. Longer lasting, they need replacing less frequently, thereby reducing waste. They’re also mercury free and can be housed in special luminaires designed for easy disassembly and recycling. A green switch alternative that’s good for your city and the planet.

From left top to right bottom: Brussels, Belgium / Berlin, Germany / Breskens, the Netherlands / Bilbao, Spain /

Eindhoven, the Netherlands


Today is an exciting time for anyone working with LED-based solutions because they allow light to be used in completely new ways. Two technology trends are pioneering the new world of LED – mimicked light sources and LED plates. Each innovation is driven by the needs of people, helping them to feel more comfortable and at home in their surroundings.

2 LED technologies LEDGINE & Fortimo

LED plate (LEDGINE)LED plate solutions provide the same excellent light quality and building blocks as mimicked light solutions. They also provide outstanding night preservation with minimal light spillage, glare or nuisance. However, they offer considerably more scope than mimicked light sources in terms of their range of outdoor applications. The multi-layer optics allow you to customise solutions for any major road, urban street, city centre or residential application with the option to upgrade quickly and simply at any time in the future.

Mimicked light sourcesSolutions that provide a diffused distribution of LED light are known as mimicked light sources because they provide a similar ambience to PL and PL-T solutions. Thanks to the remote phosphor technology there is no compromise whatsoever on light comfort What’s more, mimicked light sources provide excellent facial recognition and an improved perception of safety. The breakthrough technology provides a more sustainable and financially attractive solution for residential lighting applications with no colour shift over time or between luminaires.


White LED light is an appealing solution for every city. However, ongoing developments in LED innovation have led to some municipalities delaying the decision to upgrade their lighting because they fear it will become outdated. The introduction of future-proof LEDGINE technology makes it possible to switch with confidence.

Energy saving Save energy vs conventional lighting and reduce CO2

Benefit from future efficiency gains

Easy & fast, tool less maintenance on site

Provide and secure a safe way home

For all lighting needs, compliant with norms

LEDGINEEnergy saving / Future proof

Flexibility

Safety / Reassurance / Compliance

Upgradeable

Serviceable

Lighting Quality

Multi Application

Preference / Strategy

All Ranges & co-development

Choose your light colour according to your city's strategy and preference

Select your luminaire range

8 000 K 6 000 K 5 000 K 2 000 K


One easy clip for opening the luminaire

LEDGINE Inside

Turning 2 screws loosens the complete LEDGINE (Also available with magnetic holders for tool-less servicing)

Easy push-connectors to disconnect mains and controls

A small twist release the gear tray

The frame will open downwards giving easy access to the complete system

Easy push-connectors to disconnect mains to fan

Lift and remove complete LEDGINE

Easy push-connectors to disconnect driver from LEDGINE

Lift and remove complete gear tray

One minute upgradesLEDGINE offers all the advantages of LED white light with a new, future-proof design that makes upgrading safe and simple. One-to-one replacement of HID technology is possible without compromising on light quality, spacing or mounting height. And thanks to tool-less upgrades, maintenance and servicing, you can make the switch in just one minute.

Energy-saving solutionsCompared with conventional light sources, LEDGINE can reduce energy consumption by up to 70%, thereby helping to reduce CO2 emissions. Highly efficient with an extremely long lifetime (50,000 hours), they also require little maintenance. What’s more, because the LEDGINE module is a building block that’s designed for easy upgrades, you can benefit from future efficiency gains too.

Distinctive designThere are four, distinctive designs to choose from - CitySoul LEDGINE, SpeedStar LEDGINE, MileWide LEDGINE and CitySpirit Street LEDGINE. Available in a dedicated range of masts and brackets, they provide you with a complete solution that contributes to the identity of your city rather than just providing light points. Suitable for all urban street lighting applications, LEGDINE allows you to switch from HID to LED, or expand your existing installation with flawless continuity of design.

Future-proof solutionPhilips’ luminaires with LEDGINE inside provide a truly lasting solution that can be upgraded simply by switching the module. So you can create a city with authentic, aesthetic appeal now, confident that you can still profit from any new LED innovations that happen in the future. All of which means that LEDGINE luminaires will still look like a great investment in years to come. You are also prepared for changes in legislation. You can exchange the "old" not complying module for a new fully complient versions.

Easy on the eye, the planet and your budgetLEDGINE is available in three solutions to suit your city’s lighting strategy – ambience, energy saving or economy. ComfortLine creates a warm ambience with superior comfort and minimal glare. GreenLine optimises energy and performance to reduce your energy bills and your carbon footprint. And for those cities that are willing to accept cool colour temperatures and limited energy savings, there’s also our EconomyLine.

I want to offer my citizens a warm ambience and the most comfortable lighting regarding glare.

I want the most energy efficient solution that will reduce as much as possible my energy bill and my carbon footprint.

I can accept cold colour temperatures and limited energy savings to have an economical solution.

ComfortLine

GreenLine

EconomyLine

LEDGINE Lighting QualityLEDGINE is available with four different multi-layer optics, allowing you to customize your solution according to the application (street, road, city centre, residential). The smooth distribution guarantees excellent light uniformity and the controlled beams also minimise glare, compared to multiple spot optics (see graphic below). All LEDGINE luminaires are dark sky friendly (0-candela)

and are fitted with a flat glass optical cover for superb night preservation. What’s more, with one-to-one replacement of HID installations, you can create significant energy savings without compromising on light quality or safety.

LEDGINE provides you with the building blocks to create an optimized solution, now and in the future. The optical system is available in a choice of three colour temperatures: Warm – 3000K,

Neutral – 4000K and Cool white – 5600K. Each solution provides excellent facial recognition, even at a distance, for an enhanced feeling of safety and security. The surrounding ratio is in line with expectations and with no cut-off effect (Smooth fade from primary area to secondary area), they also provide light on the pavements.

Upgradeability / Serviceability

Multiple layer

Multiple spot

Time

Time

8 000 K

6 000 K

5 000 K

2 000 K


Lumen maintenanceat ambient temperature 25ºC

1.00

0.95

0.90

0.85

0.80

0.75

Life (H

rs)1,0

003,0

005,0

007,0

009,0

0011

,00013

,00015

,00017

,00019

,00021

,00023

,00025

,00027

,00021

,00031

,00033

,00035

,00037

,00039

,00041

,00043

,00045

,00047

,00049

,00051

,00053

,00055

,00057

,00059

,000

GreenLine ComfortLine EconomyLine


1.00

0.95

0.90

0.85

0.80

0.75

Life (H

rs)1,0

003,0

005,0

007,0

009,0

0011

,00013

,00015

,00017

,00019

,00021

,00023

,00025

,00027

,00021

,00031

,00033

,00035

,00037

,00039

,00041

,00043

,00045

,00047

,00049

,00051

,00053

,00055

,00057

,00059

,000



1.00

0.95

0.90

0.85

0.80

0.75

Life (H

rs)1,0

003,0

005,0

007,0

009,0

0011

,00013

,00015

,00017

,00019

,00021

,00023

,00025

,00027

,00021

,00031

,00033

,00035

,00037

,00039

,00041

,00043

,00045

,00047

,00049

,00051

,00053

,00055

,00057

,00059

,000


In the past a lot of figures and statistics where available for LED lighting, but most of them where measured under controlled conditions. We know that all lighting applications are different and Philips luminaires with LEDGINE inside take these differences into account.No matter in what environment your lighting needs occur, we made sure that all LEDGINE

luminaires, provide you with a constant high quality white light and constant light output over the lifetime, independent from the ambient temperature in your lighting application as you can see in the following graphs. Being confident in switching to LED in outdoor lighting was never made easier and more convincing.

Tested for all environments


Urban lighting CitySoul LEDGINE SpeedStar LEDGINE

To make choosing the right solution for your lighting project as simple as possible we have created a LEDGINE online selection tool. It’s easy to use and offers an indication of the most suitable LEDGINE module according to your application requirements and your city’s strategy and preferences.

Simply choose a product range from our city beautification or road lighting options. Then, using the drop down menus, select

LEDGINE selection toolthe specifications you require such as lighting class, road width and spacing. The online selection tool will present you with three options GreenLine for energy saving, ComfortLine for ambience and EconomyLine for affordability. Click on your preferred option to see an overview of the benefits that each solution will bring to your lighting project. You can find the LEDGINE selection tool at www.philips.com/urbanlighting

Compared with conventional technology LEDGINE solutions offer you the advantage of application-specific optics. It means you can minimise light spill, optimise light distribution and boost colour rendering to suit all kinds of requirements and applications

LEDGINE versus conventional technology


In the current context of awareness of ecological issues and our footprint on the planet, it is important to emphasize the costs of public lighting on our energy bill. This latter represents approximately 40% and could be reduced by 50% if the lighting was equipped with telemanagement solutions.

The right light at the right moment

StarsenseSystem of remote light points that works equally well on ferromagnetic and electronic equipment and which can be integrated in the lamp foot or deported mast. It is not limited in power scenarios and it can easily have different behavior on the same installation. Most comprehensive system, it also allows to have feedback from the installation, which supports easy maintenance. This solution can generate up to 70% energy savings.

DynadimmerAdditional controller included in each light point - operated on electronic equipment and can be integrated into the lantern. Il can apply 5 levels of power, (re) definable on the level and duration, per chosen light point. For example, an average energy saving of approximately 40% per year can be realised.

LumistepElectronic ballast bi-power which lowers the flux of the lamp and power consumed over a period of 6, 8 or 10 hours (3 programmed versions - not editable). Lumistep doesn't require an external controller. The potential energy savings (on power system) is 23% in 60W version, 40% in 90W and 140W version.

With fixed / pre-set dimmingWith interactive dimming

Ener

gy c

onsu

mpt

ion

6:00 PM 7:00AM

Saving potentialup to 70%

With fixed / pre-set dimming

Ener

gy c

onsu

mpt

ion

6:00 PM 22:00 PM 5:00AM 7:00AM


0%

100%

80%

60%

40%

20%Ener

gy c

onsu

mpt

ion

6:00 PM 22:00 PM 5:00AM 7:00AM


0%0%

100%100%

80%80%

60%60%

40%40%

20%20%


LED GREEN Program

Carbon neutral luminairesSustainability and energy saving are our key core values. We aim to delight people with energy efficient solutions, through efficient optics, light sources and intelligent controls. With LEDs we’ve also greatly reduced the amount of energy needed to run our luminaires, the reason they have the most environmental impact.

However, we’ve also decided to go one step further by neutralising the environmental impact of some of our ranges. SpeedStar will not only represent a breakthrough in energy efficient solutions for road lighting; it will also be the first certified carbon neutral luminaire!

The carbon footprint of its manufacturing phase has been assessed and verified by an external and independent agency. By financing certified projects aimed at reducing carbon emissions, we will be compensating for this figure, making it carbon neutral. This programme will soon be extended to our key outdoor luminaire ranges such as CitySoul and CitySpirit.

Best in class for energy savings, produced in a ISO-14001 factory which offsets its carbon footprint, SpeedStar is definitely the greenest luminaire of all.

Acting responsibly towards the environment means securing the optimum balance between energy savings (and CO2 reduction) versus costs during the lifetime of your LED luminaire. The LED GREEN Program ensures that all your luminaires have their LEDGINE modules upgraded at the right time, allowing you to benefit from continuous energy savings.

Peace of mind from Philips To maximise their performance, LEDGINE modules need to be replaced every six to eight years. Our LED GREEN Program takes care of it for you, ensuring all your luminaires have their LEDGINE modules upgraded at the right time with a full guarantee on all luminaires during the 10-year Program. Not only will it eliminate any worries about unforeseen maintenance costs, as LED technology evolves over the next 12 years, 6-yearly upgrades could reduce your energy consumption and CO2 emissions by an extra 45%.

Planned upgradesThe LED GREEN Program is an extremely attractive financial option that makes planning for upgrades simplicity itself. With budget control and complete flexibility you can afford to go LED now and show your commitment to continuous energy savings in the next 10 years.


Cities overview

\\ 03

\\ 04\\ 05

Cities overview

\\ 02 . Urban streets

\\ 03 . Residential areas

\\ 04 . City centres

\\ 01 . Major roads

\\ 05 . Architectural lighting

\\ 02\\ 01


Municipalities are under pressure to meet energy conservation goals by reducing their energy consumption while complying with lighting norms and standards. All our luminaires are optimised to provide precisely the right level of light, in the right place, at the right time. So your citizens will always enjoy a safe journey home.

Major roadsSpeedStar LEDGINE Large

• Future-proof, upgradable and serviceable with LEDGINE inside, replaces up to 250W SON-T

• Carbon neutral luminaire with holds 96 to 160LEDs

• Fully compatible with all lighting controls for further energy savings

Specifications

• Type 120 – 314W• Line voltage 220 – 240V• Lifetime 60.000 hours

(Ta = 25ºC)

SpeedStar LEDGINE Medium

• Future-proof, upgradable and serviceable with LEDGINE inside, replaces up to 100W SON-T

• Carbon neutral luminaire with holds 16 to 80LEDs

• Fully compatible with all lighting controls for further energy savings

Specifications

• Type 20 – 156W• Line voltage 220 – 240V• Lifetime 60.000 hours

(Ta = 25ºC)

Starsense

• Saves energy by managing individual light points to be dimmed or switched on or off

• Minimising light pollution and increasing safety

• Easy and fast commissioning through Starsense software

• Centrally controlled

Preventing accidentsWhite LED light makes our streets safer for drivers and pedestrians. Visibility is a critical factor in road safety and tests show that this is actually improved with white light. Not only can drivers detect roadside movement more quickly, they also have more time to stop should something be about to cross their path. Pedestrian safety is also improved because people are more likely to see oncoming traffic and react accordingly. So, by making our roads and pavements safer, white LED light has the potential to prevent serious injuries and reduce fatalities.

Revolutionary LEDLED technology is revolutionising functional outdoor lighting for major roads in the city. Energy efficient and controllable, it also offers dimming possibilities. For example, Starsense eliminates wasted light during the night when there is less traffic and therefore less light is needed. It’s easy to install and pre-set dimming schemes make saving energy simplicity itself.

Dynadimmer

• Ease of installation in existing lighting

• Provides additional energy savings by dimming

• 5 dimming levels and time periods for optimal scheduling

• Stand alone


SpeedStar LEDGINEOur SpeedStar LEDGINE luminaire addresses the fundamental concerns about safety on major roads and provides a sustainable solution that also reduces your impact on the environment. Suitable for a broad range of applications from low residential streets to high traffic road lighting, SpeedStar LEDGINE is a stylish, functional and carbon-neutral alternative.

Best-in-class opticsA dedicated design, the LED optic gives a uniform light distribution with a smooth transition from primary (100%) to secondary (50%) areas. Featuring a multi-layer approach with a upgreadable engine, SpeedStar LEDGINE also offers a low glare perception.

Long-lasting performanceA long lifetime of 60.000 hours (86% lumen maintenance at Ta = 25ºC) means that SpeedStar LEDGINE also requires less main-tenance. With LEDGINE inside it’s also future-proof, upgradable and easily serviceable with tool-less maintenance in less than one minute. The flat glass cover even makes cleaning easy.

Saving energyCompared with your existing installation, SpeedStar LEDGINE could help you realise energy savings of up 70% as it replaces up to 250W SON installations. What’s more, because it’s fully compatible with all lighting controls such as Starsense and LumiStep, it offers you the potential to save even more energy.

Key featuresSpeedStar LEDGINE also comes with a choice of three colour temperatures: Warm white (3000 K), Neutral white (4000 K) and Cool white (5600 K). Available in medium (80 LEDs) to large (160 LEDs) versions in steps of 8 LEDs there is also a dedicated choice of LED-optics for all your application requirements.

• All applications ME&S-classes covered, from low residential streets to high-traffic road lighting

• Functional luminaire• Dedicated design• Long lifetime performance• Best-in-class optics• Multi-layer approach with LEDGINE• Low glare perception

• Smooth transition from primary (100%) to secondary area (50%)

• Upgradeable from HID to LED• Up to 70% savings LED vs existing

installations• Compatible with all lighting controls

(eg StarSense, LumiStep)• Serviceability & Upgradeability• Easy, tool-less maintenance in less

than 1 min

Examplary project

Examplary project

Valladolid, Spain


Over the years, people have focused on the functional side of the urban landscape. Now we’ve come to realise the importance of making people feel a connection with their cities and a sense of belonging. Lighting has proven to be a highly effective and cost-efficient way to re-humanise our urban environments – preventing crime, promoting tourism and creating a real sense of identity and pride.

Urban streets

Pleasing road users and residentsRoads that link residential areas to busy highways or industrial zones require a specialised lighting solution that accommodates both pedestrians and motorists. LED Lighting that combines functionality with feeling strikes the perfect balance. It offers the technical performance of traditional road lighting as well as the softer ambience that suits more people-centric areas of the city.

Design freedomTailored for use with low masts, our solutions minimise glare for drivers and pedestrians and maximise your design possibilities. You can create attractive lighting effects with

the high light levels that help to keep our streets free of crime. And for extra versatility you can combine our lighting solutions with architectural brackets and columns, reflecting the local surrounding and making everyone feel more at home in the city.

Enriching urban lifeLighting has the power to bring the city to life, especially at night. City beautification creates an inviting ambience that makes people feel safe and secure, on foot, on bicycles, in cars and on public transport. With LED lighting you can turn the urban environment into an exciting, captivating space that people want to spend more time in at night.

MileWide LEDGINE

• Dedicated mast & bracket solutions for perfect integration in urban environment

• Upgradeable from HID to LED • Versatile luminaire family with

contemporary design for all kind of applications

Specifications

• Colour temperatures: Warm white (3000K), Neutral white (4000K) and Cool white (5600K)

• Lifetime 60,000 hours (Ta = 25ºC)

ClearLine

• Highly energy-efficient LED light source enabling substantial energy savings

• Further energy savings through step dimming during off-peak periods

• Easily upgradable light engine (LED and gear module)

Specifications

• Colour temperatures: Neutral white 4000K

• Lifetime 50,000 hours Ta =35 °C)

CitySoul LEDGINE

• Compact urban luminaire enhancing the identity of the city

• Highly versatile range with a wide choice of masts and brackets

• Upgradeable from HID to LED

Specifications



Dynadimmer

• Ease of installation in existing lighting

• Provides additional energy savings by dimming

• 5 dimming levels and time periods for optimal scheduling

RoadStar

• Energy efficient LED light source with customisable light control

• Pole spacing up to 8 times its mounting height

• Excellent thermal management and weather resistance

Specifications

• Colour temperatures: Neutral white 4000K

• Lifetime 70,000 hours Ta = 25ºC)

MileWide LEDGINE

MileWide LEDGINE

MileWide LEDGINE

CitySoul LEDGINE


CitySoul LEDGINE CitySoul is a family of modular street LED luminaires. Its classic design with dedicated masts and brackets blends seamlessly into today’s urban environment. The simple, flat, ellipsoidal form of the luminaire creates an elegant light-point. Suitable for side-entry, suspended or post-top installation, it’s a versatile solution that fits all kinds of applications.

MileWide LEDGINEWith the pure, contemporary MileWide LEDGINE, you can fulfil all your city’s road lighting requirements. The Knud Holscher-design with dedicated masts and brackets integrate perfectly into any cityscape. Blending clean, simple design and high performance, MileWide LEDGINE is suitable for a wide range of applications, from major traffic roads to city centres.Multi-layer optics A dedicated choice of LED optics is available for both CitySoul and MileWide LEDGINEs. The multi-layer approach provides a smooth and uniform light distribution with reduced glare. You can also use them to replace HID solutions directly without compromising on spacing, mounting height or light quality.

Energy savingsCompared with conventional light sources, CitySoul LEDGINE and MileWide LEDGINE can reduce energy consumption by up to 70%, thereby helping to reduce CO2 emissions. Highly efficient with an extremely long lifetime (60,000 hours), both solutions also require little maintenance. What’s more, because the LEDGINE module is a building block that’s designed for easy upgrades, they enable you to benefit from future efficiency gains too.

Easy upgradesEasy to install, CitySoul LEDGINE and MileWide LEDGINE are delivered ready for tool-less serviceability and upgrades, ensuring savings far into the future. The internal architecture of the luminaires makes routine maintenance straightforward. And because they’re green flagship products, you’ll find them easy to recycle too.

Key featuresCitySoul LEDGINE and MileWide LEDGINE come with a choice of three colour temperatures: Warm white (3000 K), Neutral white (4000 K) and Cool white (5600 K) and enable you to upgrade your current lighting installation from HID to LED without any compromises on lighting quality and lumen output.

CitySoul LEDGINE


Reference project

LocationFlorence, ItalyProductCitySoul LEDGINE

Reference project

LocationMarseille, FranceProductCitySoul LEDGINE

Reference project

LocationValladolid, SpainProductCitySoul LEDGINE

Reference project

LocationRome, ItalyProductCitySpirit Street LEDGINE

Reference project

LocationRotterdam, the NetherlandsProductCitySoul LEDGINE

Eindhoven, the Netherlands


CitySpirit LED

• Smooth indirect lighting for urban and residential areas

• Driver-controlled constant light output, also dimmable

• Future-proof, upgradable LED technology for highly energy-efficient lighting

Specifications

• Colour temperatures: Warm white (3000K), Neutral white (4000K)


Once a purely functional consideration in terms of safety, security and orientation, lighting in residential areas is now being use to create attractive spaces that improve quality of life for residents. Breathing new life into parts of the city that have been overlooked for far too long.

Residential areas

The power to make people feel safeAfter dark, white LED light plays a vital role in helping people to feel safe outdoors. It’s higher perceived brightness and superior colour rendering make it easier to distinguish objects, colours, shapes and people. Even from a distance faces are far easy to recognise and this helps to reduce anxiety when residents are approached on the street.

New possibilitiesThe LED revolution has opened up a new world of possibilities for residential lighting. Energy savings of up to 70% are just the start. Our future-proof LED solutions with

upgradable light engines also provide a constant light level over their long lifetime. A fit and forget solution that will prove to be a great investment for years to come.

Preserving night skiesHighly efficient optics and dimming possibilities make LEDs the perfect choice for residentials areas. Not only do they reduce the amount of energy used to light a space, precise beam control also minimises spillage. Light is distributed only where and when it is needed, preserving the night sky and ensuring city residents enjoy a sound night’s sleep.

CitySpirit Street LEDGINE

• Distinguished and modern design for a dynamic ambience

• Excellent lighting performance. upgradable from HID to LED

• Wide choice for elegant solutions in every situation

Specifications



Koffer2 LED

• Energy-efficient road lighting solution, upgradable LED module

• Constant Light Output functionality

• Smooth light perception • Driver : Fortimo LLM

Specifications

• Colour temperatures: Warm white (3000K) and Neutral white (4000K)


Mini Koffer2 / Mini Modena / Mini Iridium / Mini MileWide

• Most advanced green innovation with best possible TCO

• Additional energy savings with dimming or telemanagement

• Built for CosmoPolis system & upgradable for LED

Specifications

• Colour temperatures: Warm White (3000K)


LumiStep

• Maximised energy efficiency on dedicated gear

• Less energy consumption by automatic dimming

• Reduced maintenance costs due the long-life Xtreme gear

Residium LED

• Range of economical general-purpose road lighting luminaires

• Upgradable LED module• Optimum light distributions,

minimal light pollution

Specifications

• Colour temperatures: Cool White (5600K)



CitySpirit Street LEDGINEA combination of distinctive design and high quality lighting, CitySpirit Street LEDGINE enlivens contemporary streets. To ensure your residential lighting blends perfectly into the urban architecture, the luminaire, mast and bracket have been created as a cohesive design for seamless continuity.

Uniform distribution, reduced glareThe multi-layer optics provide uniform distribution and reduced glare, allowing direct replacement of HID solutions without compromising on spacing, mounting height or light quality. And the energy efficient CitySpirit Street LEDGINE is delivered ready for tool-less serviceability and upgrades, ensuring savings far into the future.

Long-lasting performanceCitySpirit LEDGINE has a long lifetime of 60.000 hours (86% lumen maintenance at Ta = 25ºC) and therefore requires less maintenance. With LEDGINE inside it’s also future-proof, upgradable and easily serviceable with tool-less maintenance in less than one minute.

A sustainable solutionAssembled without glue, with all plastic parts coded for traceability, CitySpirit LEDGINE is easily recycled and complies with RoHS. A sustainable solution that can only enhance your city’s green credentials.

Key featuresCitySpirit LEDGINE is available in a choice of three colour temperatures: Warm white (3000 K), Neutral white (4000 K)and Cool white (5600 K) and enable you to upgrade your current lighting installation from HID to LED without any compromises on lighting quality and lumen output..


Reference project

LocationFyn, DenmarkProductMini Iridium LED

Reference project

LocationEindhoven, the NetherlandsProductResidium LED

Reference project

LocationMagdeburg, GermanyProductCitySpirit LED

Reference project

LocationCopenhagen, DenmarkProductCitySpirit LED


UrbanScene LED

• All a city needs, a total solution for streets and areas

• Create an open urban environment

• Energy saving with highly efficient gear and LED

Specifications

• Colour temperatures: Mono colour; Warm white (3000K), Neutral white (4000K)

• Lifetime 50,000 hours

CitySpirit LED

• Smooth indirect lighting for urban and residential areas

• Driver-controlled constant light output, also dimmable

• Future-proof, upgradable LED technology for highly energy-efficient lighting

Specifications

• Colour temperatures: Mono colour; Warm white (3000K), Neutral white (4000K)

• Lifetime 50,000 hours

LumiMotion

• Dimming to 20% without jeopardizing the safety of people

• Auto-addressing which minimises the commissioning

• Enables huge energy savings and nature & night preservation

CitySwan

• soft and functional light• distinguished design• possibility to create changing

illumination situations and light moods

Specifications

• Colour temperatures: Warm white (3000 K), Neutral white (4000 K) and Cool white (5600 K)

• Lifetime 60.000 hours (Ta = 25ºC)

Volgograd, Russia

Lighting has the power to enhance life in the city. No longer simply functional, it has become a creative art, illuminating attractive and inviting atmospheres that encourage night-time socialising and enrich the city’s night life. During the day luminaires also play an architectural role, complementing the street scene with style and subtlety.

City centers

Aesthetic appealAfter dark, LED light can transform buildings and architectural features, bathing them in dynamic colour that adds to the city’s vibrant atmosphere. It’s also perfect for more functional lighting in communal areas and busy streets. Preferred by many to the glow of traditional sodium lighting, pure LED light is one of the reasons why our cities are now more liveable and enjoyable.

The safe solutionDedicated LED solutions are a great way for municipalities to show that they have a positive desire to preserve the environment as well as maintaining safety and security

on city streets. Functional and cost driven, they provide a solution that is manageable, upgradable and future proof, without compromising whatsoever on safety norms and regulations.

Creating identitiesCities are looking for solutions to their lighting requirements that go beyond just providing light points; they want inspirational ideas that will contribute to the identity of the city and instil a real sense of pride. No two cities are alike, so our key ranges features several mast and bracket design that provide an elegant solution for every style and period of architecture.


Reference project

LocationCopenhagen, DenmarkProductCitySwan

Reference project

LocationStrassbourg, FranceProductUrbanScene LED

Reference project

LocationCopenhagen, DenmarkProductUrbanScene LED

Reference project

LocationTilburg, the NetherlandsProductCitySpirit LED


iW/eW Graze Powercore

• Intelligent, high-performance white light LED fixture static or tunable from warm to cool white

• Superior Fixture to Fixture Consistency with Optibin Technology

• Energy efficient and ease of installation

• Wide choice of beams and product lenghts

Specifications

• Colour temperatures: 2700 – 6500K


LEDLine2

• Create a seamless curtain of light to enhance architecture

• Wide range of colours and white light

• Smooth design• Wide choice on product length

Specifications

• Colour temperatures: Cool white (5600K), Warm white (3000K), Neutral white (4000K)

• Lifetime 50,000h (Ta = 25ºC)

iW/eW Reach Powercore

• High-performance exterior floodlight to brilliantly illuminate large scale architectures

• An exact beam with no light spillage by user-interchangeable lenses

• Supports a multitude of different light distributions and applications

Specifications

• Colour temperatures: 2700 – 6500K


iW/eW Blast Powercore

• Intelligent, high-performance white light LED fixture over 1.600 lumen output

• Superior fixture to fixture colour consistency with intelligent, static or tuneable white light

• Energy-efficient solution for all kind of flood lighting application

Specifications

• Colour temperatures: 2700K – 6500K


iW/eW Burst Powercore

• High-intense white light LED floodlight in neutral and warm white

• Saves up to 80% energy • Simplified installation and efficient

management with Powercore® technology

Specifications

• Colour temperatures: 2700 - 4000K


Bratislava Castle, Bratislava, Czech Republic

At the heart of a city lie its landmarks. Lighting buildings and monuments puts them centre stage, creating markers for orientation and celebrating the city’s unique identity. From single buildings to entire districts, lighting adds the drama and accents that bring the cityscape to life at night.

Architectural lighting

Inspiring ideasIn the hustle-bustle of the city, the imaginative use of light can create a sense of space, manage moods and enhance lives. Our lighting solutions provide 1,000 shades of high quality white light in a wide range of colour temperatures and brightness. With a wide variety of optics you can create precise light effects for every architectural application. All it takes is our technological expertise and your imagination.

Powercore TechnologyPowerCore technology controls the power output to fixtures rapidly, efficiently and accurately. Our iW solutions have channels of warm white and cool white light with colour temperatures from 2700 K to 6500 K. The brightness can be adjusted at the same time as varying or maintaining a constant colour temperature, giving you an intelligent, tuneable solution for all sorts of applications. Our eW solutions give you the option of static white light in 2700 K and 4000 K temperatures with the ability to adjust the brightness according to your preference.

Optbin TechnologyIndividual LEDs are never exactly the same, so those with similar colour and output performance are grouped together in “bins”. Philips Optibin Technology is an advanced optimisation process that minimises the effects of the inherent variance and inconsistency of the "bins" produced by LED manufacturers. The result is optimal colour consistency across all our lighting solutions.

White lightWith a full spectrum of colour temperatures and a high colour rendering index, our white LED solutions allow you to illuminate the city’s architecture in a more vibrant, natural and authentic way. The only tool you need to unleash your creativity to dazzling effect.


Reference project

LocationBerlin, GermanyProductLEDLine2

Reference project

LocationDubrovnik, ProductLEDLine2

Reference project

LocationCounty Hall, London, UKProductColorReach Powercore


Reference project

ProjectBoston TowerLocationBoston, USAProducteW Graze PowercoreeW Blast Powercore

Reference project

ProjectHradLocationBratislava, Czech RepublicProductLEDLine2


Concepts & other solutions

Grass LEDGrass is a lighting fixture which focuses on the environment and sustainability. Energy consumption is just 19W per fixture. The long lifetime of LED diodes of approx. 50,000 hours also makes maintenance cheap. Finally, the fixture is made of as few materials as possible – all recyclable.

CitySwanLocal Design addressing cultural specificities. Availability of Design without being connected to the energy grid. Available both in LEDs and HID depending on application. Fully integrated standard solutions. Future-proof and serviceable LED solution with LEDGINE inside.

Heritage LEDWith HeritageLED you are now able to combine the newest LED lighting technology with heritage luminaires, masts and brackets. You can maintain the old heritage inner city ambience and at the same time profit from the immense energy savings, made possible by this technology switch.

Park LEDParkLED was especially developed for LEDs by the Danish architect Mads Odgaard. The design reduces glare and the directional beams ensure minimum light pollution, whilst excellent levels of colour rendering make the fitting ideal for footpaths and squares.

Concepts & customised solutions for relaxation areas

Making the city streets more homely

Flexibility with formFlexibility with printing

A place A pattern classic shade simple cylinder soft elipse traditional lanter

Light-strips providing freedom of light

Integrated gearLight in all directions

3 light units + solar

Integrating lighting with the street

Looking down the street only vertical lines are visible.


MultiGlowMultiGlow integrates various functions such as: advertising, event PR, guidance, lighting. It can easily change its design to fit with its environment adapting to the culture of the area. LEDGINE inside (with all related benefits).

StraightLineA lighting installation which is in line with the street makes it less visible, therefore restoring the character of the urban environment.

UrbanStickA banner holder within the same design as the luminaire, which illuminates the banner at night for more exposure


Solar Lighting Customised solutionsApproximately 1.6 billion people in the world still have little or no access to electricity. So when the sun goes down at the end of the day, with it goes the possibility of participating in any social, cultural or recreational activities such as sport. Our solar powered LEDs let people play when night falls.

Every lighting scheme presents its own unique set of challenges. A myriad of different techniques, equipment and technologies are available to turn your creative ideas into reality. But to achieve the very best results you need to work as part of a team. No one understands that more than Philips.

LED floodlights, portable poles, solar panels and batteries, or just a set of floodlights. Setting up the system is made simple. Using the very latest energy-efficient LED lighting technology and advanced battery cells the system provides up to eight hours of floodlighting on a single solar charge – the equivalent of two or three full evening football matches or training sessions. This versatile floodlighting solution can also be very useful for non-sporting applications in locations without access to an electricity grid, such as evening classes in remote villages, festivities, safety and security, shops or outdoor markets, or emergency lighting for disaster situations. Solar lighting solutions from Philips also enable the vast improvement of street safety by bringing light to roads without the pre-condition of an existing energy network, just using the power of the sun when night falls. The systems are highly sustainable, with a rugged design, able to withstand the extreme rigours of life in some of the more challenging and remote terrains in the world. It’s perfect sense and simplicity.

RenderTool visualisationLighting designers have the skills and imagination to visualise the most amazing lighting possibilities. But not everyone shares that vision. That’s why we have developed our RenderTool visualisation service. It alllows you to superimpose images of luminaires and masts onto a snapshot of your location so that your clients can see an interpretation of your lighting scheme. Reassuring them throughout the whole design process and bringing light to life.

A world’s first from PhilipsIn November 2009 Philips came up with the ultimate solution: the world’s first dedicated solar-powered LED floodlighting (intense beams of light). The new Philips system enables communities in developing and developed countries alike to enjoy playing or watching sport long into the night, helping to bring the fun and enjoyment of sports to communities where a lack of electricity limits participation. The solar system is available as a fully portable solution, and also on project basis. It can include

Dedicated lighting professionalsOur dedicated application and product development teams are here to help. They are actively involved in projects associated with the creative design and implementation of the illumination of prominent land marks; urban, street and stadium lighting; programmes related to city beautification, and lighting control systems for both indoor and outdoor application. Our specialists will be happy to work with you to co-create a lighting solution that brings your city lighting ideas to life.

1. Creative idea 3. Bringing visions to life2. Visualisation via 3D

renderings/animations


Overview LEDSPedestrian areas/ City centres

replaces 45 to 100W

Inno

vatio

n &

Des

ignPe

rform

ance

Easy

Urban streetsResidential areas Major roads / Highways

up to 150W up to 250W

UrbanScene MileWide

CitySpirit Street & CitySoul

ClearLine

CitySpirit LED

CitySpirit LED

Mini LED platform SpeedStar

Iridium2

RoadStar

Koffer2 70

Residium

LED Manifesto brochure56 LED Manifesto brochure 57

SpeedStar Choice sheet

OpticOptc

ClassCLS

CLO OptionTRAFO

DMDistribution Medium

DUDistribution Ultra Narrow

ISafety Class I

PSRWithout CLO

PSR-CLOWith CLO

DWDistribution Wide

IISafety Class II

DXDistribution Extra wideDCDistribution Comfort

Product Family CodePFC

BGP322Medium Version

BGP323Large Version

ColourCLR

SISatin silver grey 9006-likeGRUltra dark grey 10714RALRal Colour

CLRCHColour Choice AKZO Sablé

Lighting ControlLC

Lighting RegulationLR

Mounting deviceMDEV

NNo Lighting Regulation

42/60SSide-entry42mm - 60mm

D4Dimming via SDU01Sworks with 0-10V

60/76PPost-top60mm or 76mm

NNo Lighting Control

CLOCLO

LS-6Lumistep 6hours

CLO-LS-6Lumistep 6hours with CLO

LS-8Lumistep 8hours

CLO-LS-8Lumistep 8hourswith CLO


DD1Dynadimmerworks with 0-10V

CLO-DD1Dynadimmer w/ CLOworks with 0-10V

LS-10Lumistep 8hoursNot yet available


D6StarSense 1-10Vdc



D7Dimming via external communicationworks with 0-10VdcD8StarSense Dali

D9Dimming via external communicationworks with DaliRFRF controlworks with Dali



OLCOLC integrated in luminaireworks with 0-10V

CLO-OLCOLC integrated in luminaire works with 0-10V

PLMIntelligent lighting

CLO-PLMIntelligent lighting with CLO

Led EngineLAMPFAM

Engine VersionNAMEEXT

1MMagnetsEngine generation 11SScrewedEngine generation 1

GRNGreenline

System powerSYSPOWER20W-199W

CFTComfortLine


ECOEconomyLine


1

2

CoatingCoating

NNo (standard 500 hbs)MSPMarine salt protected coating (1000 hbs)

3

Colour PartCLRP

COOnly canopy + clip paintedALWhole luminaire painted

4

5

6

7 8 9 10

LED Manifesto brochure58 LED Manifesto brochure 59

Choice sheet - CitySoul LEDGINE / MileWide LEDGINE / CitySpirit Street LEDGINE

OpticOptc

ClassCLS

CLO OptionTRAFO

DMDistribution Medium

ISafety Class I

PSRWithout CLO

PSR-CLOWith CLO

DWDistribution Wide

IISafety Class II

DXDistribution Extra wideDCDistribution Comfort

Product Family CodePFC

BGP3431CitySoul LEDGINE

BSPCitySoul LEDGINE suspendedBRS421MileWide LEDGINE

BDS480CitySpirit Street LEDGINE

Colour*CLR

MileWide LEDGINE only

GRStandard grey

SISilver Grey

RALRal Colour

CLRCHColour Choice AKZO Sablé

Lighting ControlLC

Lighting RegulationLR

Mounting deviceMDEV

NNo Lighting RegulationD4Dimming via SDU01Sworks with 0-10V

NNo Lighting Control

CLOCLO

LS-6Lumistep 6hours

CLO-LS-6Lumistep 6hours with CLO

LS-8Lumistep 8hours




CLO-DD1Dynadimmer w/ CLO works with 0-10V

D6StarSense 1-10Vdc

D7Dimming via external communicationworks with 0-10Vdc

CitySoul LEDGINE &MileWide LEDGINE

CitySpirit Street LEDGINE &CitySoul LEDGINE

60PPost-top60mm76PPost-top76mm

60SSide entry42mm - 60mm76PPost top60mm - 76mm76PAPost top60mm - 76mmAdjustableMBADedicatedbracket

Engine VersionNAMEEXT

1SScrewedEngine generation 1

1

2

Coating*Coating

NNo (standard 500 hbs)MSPMarine salt protected coating (1000 hbs)

3

Led EngineLAMPFAM

Colour PartCLRP

GRNGreenLine

COOnly canopy + clip painted

CitySoul LEDGINE90-140W

MileWide EDGINE20-80W

CitySpirit Street LEDGINE20-80W

CFTComfortLine


MileWide LEDGINE24-95W


ALWhole luminaire painted

54

6

7 8 9 10ECOEconomyLine


MileWide LEDGINE31-125W


* not for CS suspended


New demonstration areaTo address the changing agenda for lighting designers and reflect the increasing densification of urban areas, we have completely transformed our demonstration are at the Outdoor Lighting Application Center (OLAC). Originally representing a street with family homes, OLAC now recreates a contemporary urban setting with a mixture of residential buildings, a restaurant, nursery school and private houses.

The new area starts with an old installation as an eye-opener to demonstrate how lighting can be improved with modern technology. The new solutions are all state-of-the-art and feature a variety of light sources, luminaires, optics, lighting controls and dimming modes to illustrate the possibilities. It provides a unique opportunity to see the latest trends in urban lighting and assess how they meet the needs of your city in terms of sustainability, creativity and liveability. To find out more, just ask your local Philips representative.

city.people.lightOur city.people.light project pushes creative and intellectual boundaries, producing innovative and relevant lighting solutions that enrich urban settings. We share ideas and network with partners such as the Professional Lighting Designers Association (PLDA). We have also established an annual city.people.light award in conjunction with LUCI (Lighting Urban Community International) Association.

Experience it yourselfLighting our cities requires more subtlety than ever before to meet the very different needs of residents, motorists, pedestrians and cyclists. It must be functional and forward thinking, improving safety, visibility, ambience and identity at the same time as being energy-conscious and preventing light nuisance and spillage. We can help to inspire you.

OLAC Miribel, France


Find out more at: www.philips.com/urbanlighting

“ With the increasing trend towards urbanisation, we need to think about new ways to enhance our cities and turn them into more liveable spaces. I can show you LED lighting solutions that can transform the urban nightscape, creating identity, adding vitality and promoting safety and security. All without harming the planet – or your green credentials.” Name, Philips Account manager

©2010 Koninklijke Philips Electronics N.V.All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.

Date of release: October 2010 / BASE 3222 635 72881Printed in The Netherlands

Date post:	23-Feb-2019
Category:	Documents
Upload:	vutu
View:	230 times
Download:	0 times

LED for liveable cities -...

Documents