© 2014, Penn Elcom. All rights reserved
1. Product introduction CLD high performance, energy efficient 100W LED High Bay adopts high-purity aluminium with
anodic oxidation processing on its surface, which looks compact and beautiful. The unique sheet radiator design which effectively generate the heat to radiator and transfer heat by air when the LED is lighting, thereby reducing the operating temperature of LED and ensure the 50000 h lifespan of LED.
Light source adopts single imported high power chip integrated style design. This design produces a high thermal conductivity, low luminous decay pure light colour output. The power supply is adopted with high efficiency, high PF power supply control system which equipped with PWM constant current and temperature compensation technology. It applies to wide input voltage (AC 100-240V), which overcomes the damage and unstable operation of the low bays due to the instability of the lighting grid and to avoid eye irritation and fatigue during working.
It reduces the energy consumption by 80% compared with incandescent, 70% compared with mercury and more than 50% compared to metal halide. It uses second distribution curve with lens and reflector to make the light curve symmetric with a circular spot.
Areas of application: - Great installation height; - Industry; - Production halls; - Warehouses.
Features: - Energy efficient replacement; - Easy installation; - 3 Years warranty.
Benefits: - Long service life: 50000 h; - High system luminous efficacy between 80-90 lm/W; - High power factor up to 0.95 or more; - Reduced maintenance costs; - Cool-running; - Instant on no flicker or hum.
© 2014, Penn Elcom. All rights reserved
2. Product components:
2.1 LED CHIP
500 mA Osram LCW-CRDP.PC Features of the LED Chip: Package: SMD ceramic package with silicone resin and silicone lens
Typical luminous flux: 136lm @ 5000K Typical luminous efficacy: 132 lm/W @ 5000K
Viewing angle at 50% Iv: 150°
Colour: 3000 K -6500 K (neutral white) Typical CRI: 72
Corrosion Robustness: Superior Corrosion Robustness
Lumen Maintenance: Test results according to IESNA LM-80 available ESD-withstand voltage: up to 8 KV (acc. to ANSI/ESDA/JEDEC JS-001-HBM, Class 3B)
Electro-optical characteristics
Model IF (mA) VF typ. (V) Flux av. (lm) CRI typ.
LUW-CRDP 500 2.95 ~ 155 72
Maximum Ratings (Ts: 25°C)
Parameter Symbol Measurement Unit Value
Operating temperature T op °C -40…+120
Storage temperature T stg °C -40…+120
Junction temperature T j °C 135
Forward current I F mA Min:100/Max:800
Surge current I FM mA 2000
Figure 2.1 Relative spectral emission – V(λ) = Standard eye response curve:
φref = f (λ),TS = 25°C,IF = 350 mA
© 2014, Penn Elcom. All rights reserved
Figure 2.2 Radiation characteristics: Irel = f (ϕ), TS = 25°C
Figure 2.3 Forward current: IF = f (VF), TS = 25°C
Figure 2.4 Relative forward voltage: ΔVF = VF – VF(25°C) = f (Tj), IF= 350 mA
Figure 2.5 Relative luminous flux: TS = 25°C Figure 2.6 Relative luminous flux: TS = 25°C
© 2014, Penn Elcom. All rights reserved
Figure 2.7 Chromaticity Coordinate Shift: Cx,
Cy = f(IF), TS = 25°C Figure 2.8 Chromaticity Coordinate Shift: Cx,
Cy = f(Tj), IF = 350 mA
2.2 DRIVER
Specifications: Lifespan: 50000 h; Device losses (at 240V): 17 W; Input current (AC, at 240V): 440 mA; Output voltage (DC): 26 V; Output current (DC): 3.13 A; Output power (at 240V): 82.66 W; ECG efficiency: 83 %; Dimmable: no; Inrush current: <=40 A; Galvanic isolation primary/secondary: <= 3 mA; Surge capability (L/N-Ground): 2 kV; Surge capability (L-N): 1 kV; Length: 148 mm; Width: 83.5 mm Height: 38.5 mm Weight: 395 g; Casing material: Aluminium; Overheating protection: Yes; Overload protection: Yes; Short-circuit protection: Yes; No-load proof: Yes; Type of protection: IP 65 (highbay IP rating).
© 2014, Penn Elcom. All rights reserved
3. Electrical and Photometrical data of High Bay
Electrical parameters
Parameter Measurement Unit Min Average Max
Mains voltage V (ac) 90 - 264
Mains current mA 380 - 1260
Operating frequency Hz 50 - 60
System wattage W 95 100 108
PF - - 0.95 -
Photometrical parameters
Testing condition: 25°C temperature
Type of reflector 120°
Parameter Measurement unit Min Average Max
Luminous flux Lm 8000 8400 9000
Beam angle deg - 150 -
Illuminance
Area
1 m lx - 3750 -
2 m lx - 937.72 -
3 m lx - 416.76 -
6 m lx - 104.19 -
8 m lx - 58.61 -
Color Temperature K - 6000-6500
CRI Ra - 72 -
General parameters
Parameter Measurement
Unit
Min Average Max
Working temperature °C -20 25 +50
Working humidity % 20% - 80%
Storage temperature °C -25 25 +55
© 2014, Penn Elcom. All rights reserved
4. Photometrical report and graphs
Figure 4.1 Luminous intensity distribution (120° reflector)
Figure 4.2 Lux distance curve (120° reflector)
Figure 4.3 ISO - Intensity (V-H) (120° reflector)
© 2014, Penn Elcom. All rights reserved
Figure 4.4 ISO candela diagram on circular web (120° reflector)
Figure 4.5 ISO illuminance diagram (120° reflector)
Figure 4.6 Luminance limiting curve (120° reflector)
© 2014, Penn Elcom. All rights reserved
Luminance table
γ 45 50 55 60 65 70 75 80 85
C0 115316 12249 2755 1174 0 0 0 0 0
C45 81928 4919 2215 635 0 0 0 0 0
C90 74475 7414 2755 587 0 0 0 0 0
Glare table
Glare Quality Service Values Illuminance (lx)
1.15 A 2000 1000 500 <=300
1.5 B 2000 1000 500 <=300
1.85 C 2000 1000 500 <=300
2.2 D 2000 1000 500 <=300
2.55 E 2000 1000 500 <=300
a b c d e g g h
Figure 4.7 Coefficient utilization curve (120° reflector)
5. UK Mains Voltage Test
Original measurements were taken in our factory and were conducted usually at 220V.
To provide the most accurate values for the electrical parameters we conducted a series of measurements in real time. The highbay was connected to mains voltage and linked to a high-end power meter. The measurements obtained are the relevant values for active power (P), reactive power (Q), apparent power (S), input current (I) and power factor (PF, not cosϕ) when the products are used with UK voltage.
© 2014, Penn Elcom. All rights reserved
Figure 5 Real time measurements
Electrical parameters at UK mains voltage Model
number Mains
voltage [V]
Mains current
[mA]
P [W]
Q [VAr]
S [VA]
PF
LEDHB100 235.9 446 99.2 35 105.4 0.94
6. Product display and dimensions
Figure 6 LED 100W High Bay dimensions
© 2014, Penn Elcom. All rights reserved
7. Installation recommendations
Step 1 Drill 3 holes in the ceiling for hanger Step 2 Fix the hanger onto ceiling
Step 3 Hang high bay on the hanger Step 4 Connect the wires properly
8. Packaging Packaging information
Model N.W [kg]
Manner of packaging Dimensions of inner box [cm]
G.W of inner box
[kg]
Dimensions of outer box
[cm]
G.W of outer box
[kg]
LEDHB100
Light Body 4.959 1 pcs in 1 inner carton, 8 inner boxes in 1 master carton
26x26x42 5.6 53.5x44.5x54.5
23.9
Reflector 90° 0.543 20pcs in 1 carton / / 54x54x55.5 13.2 Reflector 90° 0.581 20pcs in 1 carton / / 47x47x47.8 13.3
Reflector 90° 0.581 10pcs in 1 carton / / 47x47x47.8 7.3