PROFILE LAMPING SHIELDING LENGTH VOLTAGE FINISH OPTION 1 OPTION 2 OPTION 3 OPTION 4 S Sabre 65 650 lm/ft 7.3 input watts/ft 27 2700k temp 93.5% special order option SAT Satin Lens 2 2’ 3 3’ 120V PR Primer EC Emergency Circuit TELE Telescoping (see addendum) 90 CRI 90 CRI F Flat Front 95 950 lm/ft 10.6 input watts/ft 30 3000k temp 95.2% WOL White Opal lens 4 4’ 5 5’ 277V WH White EMLED LED Battery Pack F Fusing R Round 110 1100 lm/ft 12.3 input watts/ft 35 3500k temp 96.8% CFA Clear Frosted Acrylic lens 6 6’ 7 7’ UNV Universal SV Silver DIMMING OPTIONS: D10V 0-10V dimming 1% power class DLA2 Lutron Hi-lume 1% 2-wire LED driver (120V forward phase only) DLA3 Lutron Hi-lume 1% 3-wire LED driver *assumes 4000k w/ satin lens Lumen Multi- plier = % of 4000K Consult factory for limitations 40 4000k temp 100% 8 8’ BK Black XX Specify run length in even foot increments DLA5 Lutron Hi-lume 1% EcoSystem LED driver DLEH5 Lutron Hi-lume 1%-H EcoSystem LED driver with soft-On, Fade-to-Black DLE55 Lutron 5-Series EcoSystem LED driver CC Custom Color Provide custom color RAL#: DALI Digitally Addressable Lighting Interface DIM Dimming Please specify dimming manufacturer/model (if required) System Power Draw: 65LEDxx = 6.5W/ft 95LEDxx = 10.6W/ft 110LEDxx = 12.3W/ft KEC – – LED – x – – – – – – A fully integrated cove lighting system which creates a straight, clean cove every time, in every space. Klean Edge Cove is a 2”x 8” housing, with a 4 ¾” aperture. Three unique profiles provide maximum aesthetic impact. Staggered lamps and shielding options provide seamless light quality, without scalloping for even distribution. Klean Edge Cove accommodates both regular and high-output T5 lamps, and the latest in LED technology. JOB: TYPE: LAMPING OPTIONS AT A GLANCE: Forum, Inc. | 100 Chapel Harbor Dr. | Pittsburgh, Pennsylvania 15238 | T: (412) 781-5970 F: (412) 781-5971 | www.forumlighting.com ORDERING CODE INTEGRATED COVE LED T5 90° INSIDE CORNER: 1’ x 1’ BEGINNING OF RUN END CAP END OF RUN END CAP OPTIONAL ACCESSORIES x Quantity x Quantity x Quantity 90° OUTSIDE CORNER: 1’ x 1’ x Quantity 2 5 /16” 7 3 /4” 5 1 /2” 1 9 /16” 4 13 /16” 4 7 /8” 2 1 /2” 2 5 /16” 1 11 /16” 7 3 /4” 4 7 /8” 2 3 /4” 1 11 /16” 2 5 /16” 8 7 /8” BODY PROFILES S Sabre Edge SPECIFICATIONS HOUSING 6063 T5 extruded aluminum profile approximately 2” x 8”. Integrated features allow for seamless alignment over longer runs, easy installment and removal of geartrays and lens, and seamless integration into sheetrock construction. SHIELDING Satin frosted, white opal, and clear acrylic lenses are snap in. An open configuration without shielding is the default. GEARTRAY / REFLECTOR Integrated geartray and reflector made from 20 GA cold rolled steel in a pre-paint white finish. Fully wired units remain completely accessible from above. Staggered lamping provides continuous light quality with telescoping assemblies, providing adjustability within any length installation. DRIVER Electronic, high power factor, low THD, driver used. 120V, 277V, and Universal Voltage available standard. Please consult factory for special driver requirements. LISTING All fixtures bear an AFL-CIO/IBEW union label and are UL listed for surface mounting and damp location rated. For alternative location configurations, please consult factory. LED SYSTEM Forum utilizes a tunable LED system capable of supplying between 650-1100 lumens per foot. To specify specific lumen output other than standard 950 or 650, drop the last digit of the per foot lumen output desired, i.e. 400lm/ft.= 40LED35 F Flat Front R Round * Forum reserves the right to change this information at any time . UPDATED 07/06/17 ALSO AVAILABLE IN Klean Edge Cove FORUM BY LED
System Power Draw:65LEDxx = 6.5W/ft95LEDxx = 10.6W/ft 110LEDxx = 12.3W/ft
KEC – – LED – x – – – – – –
A fully integrated cove lighting system which creates a straight, clean cove every time, in every space. Klean Edge Cove is a 2”x 8” housing, with a 4 ¾” aperture. Three unique profiles provide maximum aesthetic impact. Staggered lamps and shielding options provide seamless light quality, without scalloping for even distribution. Klean Edge Cove accommodates both regular and high-output T5 lamps, and the latest in LED technology.
JOB: TYPE:
LAMPING OPTIONS AT A GLANCE:
Forum, Inc. | 100 Chapel Harbor Dr. | Pittsburgh, Pennsylvania 15238 | T: (412) 781-5970 F: (412) 781-5971 | www.forumlighting.com
ORDERING CODE
RECESSED/DIRECT
SURFACE/DIRECT
ASYMM.RECESSED/DIRECTDIRECT INDIRECT
INTEGRATEDCOVE
SUSPENDEDDIRECT/
INDIRECTDIRECT/
INDIRECT
IN-WALL/VERT.
IN-WALL/HORIZ.
recessed/direct
surface/direct direct
indirect
suspendeddirect/indirect direct/
indirectin-wall/
horizontal
asymm.recessed/
direct
LED LEDLED LED
T5
1
T81
S T A G G E R E D
T5
2
S T A G G E R E D
HO
T5
2
HO
T5
T8
T82 T 8
STA
GG
E R E D 1 H I G H OU
TP
UT
T 5
ST
AG
G E R E D 2 S TA G GER
ED
HI G H O U T P U T
T51
in-wall/vertical
integratedcove
LED
INTE-GRATEDCOVE
RECESSED/DIRECT
SURFACE/DIRECT
ASYMM.RECESSED/DIRECTDIRECT INDIRECT
INTEGRATEDCOVE
SUSPENDEDDIRECT/
INDIRECTDIRECT/
INDIRECT
IN-WALL/VERT.
IN-WALL/HORIZ.
recessed/direct
surface/direct direct
indirect
suspendeddirect/indirect direct/
indirectin-wall/
horizontal
asymm.recessed/
direct
LED LEDLED LED
T5
1
T81
S T A G G E R E D
T5
2
S T A G G E R E D
HO
T5
2
HO
T5
T8
T82 T 8
STA
GG
E R E D 1 H I G H OU
TP
UT
T 5
ST
AG
G E R E D 2 S TA G GER
ED
HI G H O U T P U T
T51
in-wall/vertical
integratedcove
LED
INTE-GRATEDCOVE
RECESSED/DIRECT
SURFACE/DIRECT
ASYMM.RECESSED/DIRECTDIRECT INDIRECT
INTEGRATEDCOVE
SUSPENDEDDIRECT/
INDIRECTDIRECT/
INDIRECT
IN-WALL/VERT.
IN-WALL/HORIZ.
recessed/direct
surface/direct direct
indirect
suspendeddirect/indirect direct/
indirectin-wall/
horizontal
asymm.recessed/
direct
LED LEDLED LED
T5
1
T81
S T A G G E R E D
T5
2
S T A G G E R E D
HO
T5
2
HO
T5
T8
T82 T 8
STA
GG
E R E D 1 H I G H OU
TP
UT
T 5
ST
AG
G E R E D 2 S TA G GER
ED
HI G H O U T P U T
T51
in-wall/vertical
integratedcove
LED
INTE-GRATEDCOVE
90° INSIDE CORNER: 1’ x 1’ BEGINNING OF RUN END CAP END OF RUN END CAP
OPTIONAL ACCESSORIES
x Quantity
x Quantity
x Quantity
90° OUTSIDE CORNER: 1’ x 1’
x Quantity
2 5/16”
73/4”
51/2”
19/16”
413/16” 4 7/8” 2 1/2”
2 5/16”1 11/16”
7 3/4”
4 7/8” 2 3/4”
1 11/16” 2 5/16”
8 7/8”
BODY PROFILES
S Sabre Edge
SPECIFICATIONS
HOUSING 6063 T5 extruded aluminum profile approximately 2” x 8”. Integrated features allow for seamless alignment over longer runs, easy installment and removal of geartrays and lens, and seamless integration into sheetrock construction.
SHIELDING Satin frosted, white opal, and clear acrylic lenses are snap in. An open configuration without shielding is the default.
GEARTRAY / REFLECTOR Integrated geartray and reflector made from 20 GA cold rolled steel in a pre-paint white finish. Fully wired units remain completely accessible from above. Staggered lamping provides continuous light quality with telescoping assemblies, providing adjustability within any length installation.
DRIVER Electronic, high power factor, low THD, driver used. 120V, 277V, and Universal Voltage available standard. Please consult factory for special driver requirements.
LISTING All fixtures bear an AFL-CIO/IBEW union label and are UL listed for surface mounting and damp location rated. For alternative location configurations, please consult factory.
LED SYSTEM Forum utilizes a tunable LED system capable of supplying between 650-1100 lumens per foot. To specify specific lumen output other than standard 950 or 650, drop the last digit of the per foot lumen output desired, i.e. 400lm/ft.= 40LED35
F Flat Front
R Round
* Forum reserves the right to change this information at any time . UPDATED 07/06/17
ALSO AVAILABLE IN
Klean Edge Cove FORUMBY
LED
BODY PROFILE OPTIONS
Questions?(412) 781-5970Klean Edge Cove FORUMBY
4 7/8” 2 1/2”
2 5/16”1 11/16”
7 3/4”
4 7/8” 2 3/4”
1 11/16” 2 5/16”
8 7/8”
90°* INSIDE CORNER BEGINNING OF RUN END CAP
END OF RUN END CAP
90°* OUTSIDE CORNER
* Custom angles available
S SABRE EDGE
3/4”#6SHEETROCKSCREW
MUD MUD GROOVE
COMFORT ANGLE GROOVE MOUNTING LOCATION
2”
5.5” OVERHANG
7.75”
3/4”#6SheetRockScrew
Mud Mud Groove
Comfort Angle Groove Mounting Location
5.5” Overhang
7.75”
2”
3/4”#6SheetRockScrew
MudMud Groove
Comfort Angle Groove Mounting Location
51/2”Overhang
73/4”
21/3”
3/4”#6SheetRockScrew
MudMud Groove
Comfort Angle Groove Mounting Location
51/2”Overhang
73/4”
21/3”
F FLAT FRONT R ROUND FRONT
CORNER OPTIONS
PRECISION FIELD CUT
For each linear section, an extra 12” of housing is provided for a custom and precise field measurement and cut.
JOINING HARDWARE
Alignment Pin Hole
Alignment Tab Slot
Klean Edge Cove FORUMBY
HOUSING DETAILS
Questions?(412) 781-5970
OBTAINING PROPER RUN LENGTH MEASUREMENTS
Do not use
this m
easurement
Use this measurement — along mounting side of fixture
In order to achieve the proper run length measurement, be sure to use the dimension of total mounting surface.
EXAMPLE CONTINUOUS RUN SYSTEM PATTERN
1
Wall Side
Wall Side
Wall Side
Room Side
Room Side
Room Side
2 3
4
5 4 6
Example KEC Housing Component List To achieve the continuous run pattern seen at left, you will need:
1 1x Beginning of Run Endcap
2 1x 7’ KEC Housing Kit
3 1x 90˚ Inside Corner
4 2x 5’ KEC Housing Kit
5 1x 90˚ Outside Corner
6 1x End of Run Endcap
Klean Edge Cove FORUMBY
GEARTRAY DETAIL
Questions?(412) 781-5970
SHIELDING, EMERGENCY CIRCUITS, AND DIMMING OPTIONS
LENS DETAIL
1 2Satin frosted, white opal, and clear acrylic lenses are snap in. An open configuration without shielding is the default.
