Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
LED LED LED LED
Bus destination DisplayBus destination DisplayBus destination DisplayBus destination Display
We offer end to end solutions for bus displays.
1) Bus Mounted LED Destination Displays on the front and Back. 2) Passenger Information System inside the Bus. 3) Passenger Information Systems at the Bus Stops about arriving busses. 4) Passenger Information Systems at the Bus Terminus all the Arriving Departing
/buses. � The hardware can be built to any specification, from ruggedness to Water and Tamper
resistance etc like IP65. � The Boards can be driven using RS422 / RS485 or Ethernet / Wifi. � The units can also be controlled remotely using a GPRS/3G Data Terminal Unit. � We offer Red, Red+Green or Full Color boards. Our soultion also includes the software for driving the boards with minimal human intervention. The software is written to be easy and intutive to use. The software has a built in module to allow for displaying advertisements on the boards, this is especially useful for sponsored boards. The Bus Destination Information can be loaded by composing the information on a PC and copying it to a Flash disk. This Flash disk can be inserted directly into the display unit in the Bus to update the Bus Number, Destination , Via etc. We provide a simple and easy to use key pad to select the Information to display. We can also do integration with GPS to automatically display the current location and upcoming Bus Stop with Voice. The Voice should be loaded on an SD Card as MP3 files.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
LED Clocks - Standalone Clocks
1. Red display 2. Suited both for indoor and outdoor viewing 3. Industry Standard Housing and Mounting Arrangement 4. Real Time Clock based Operation for Accuracy. TXCO Osscilator for the Clock so is resistant to drifts
due to temperature variations. 5. Edit of time from Hand held remote control 6. Clock works off 230V AC mains (110V AC optional) 7. Battery Backup to ensure working in Power Failure period (clock will not show display during power
failure, but will maintain time and will show correct time once power is restored) 8. Low power consumption suitable for 24x7 operation 9. Types:
a. Time clock : Hour Minute Clock b. Time clock : Hour Minute Seconds Clock c. Time & Date clock : Time at top & Date at bottom
10. Display sizes (approx) – 4.3”/110mm, 9”/230mm, 18”/460mm
LED Clocks - Networked Clocks (Master - Slave) LAN / RS485 / GPS Clock
1. Red display 2. Suited both for indoor and outdoor viewing 3. Real Time Clock based Operation for Accuracy. TXCO Oscillator for the Clock so is
resistant to drifts due to temperature variations. 4. Easily Configurable LAN for efficient working (for LAN clock). CAN USE NTP SERVER
TIME OR PC TIME 5. Real Time Clock Settings through LAN or RS485 6. Industry Standard Housing and Mounting Arrangement 7. Individual Time Settings as per IP Identification (for LAN clock) 8. AC Power,230V,50Hz 9. Battery Backup to ensure working in Power Failure period (clock will not show display
during power failure, but will maintain time and will show correct time once power is restored)
10. Low power consumption suitable for 24x7 operation 11. Clock works off 230V AC mains (110V AC optional) 12. Types:
a. Time clock : Hour Minute Clock b. Time clock : Hour Minute Seconds Clock c. Time & Date clock : Time at top & Date at bottom
11. Display sizes (approx) – 4.3”/110mm, 9”/230mm, 18”/460mm
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected] LED Clocks
Clock with Message
Features:
1. LED Matrix Digital Clock with Custom Message.
2. TXCO Osscilator for the Clock so is resistant to drifts due to temperature variations. 3. Font Can be Selected. 4. Multiple Custom Messages can be displayed in any language. 5. Single Color and Multicolor Options are available. 6. Brightness levels can be set based on a Day/Night sensor or by Hour of the day. 7. Customizable display with Hour , Minute, Second, Year , Month, Day of week and
date 8. In any combination with the ability to time and scroll the dispay.
Optional Components.
1. The clock can be updated from GPS. 2. The clock can be updated from a PC. 3. The Messages can be updated from a PC periodically. 4. Master Slave Options are available.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
All weather clocks
8 inch (200mm) HH.MM
8 inch (200mm) HH.MM.SS
12 inch (300mm) HH.MM
12 inch (300mm) HH.MM
18 inch (450mm) HH.MM
18 inch (450mm) HH.MM
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Specification for All Weather clock Digits:
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Indoor Viewing - Clock Models
Model Digit
height in mm
Model Model
ID-CLK-140-HM 140 mm Full Matrix Hour Minute ID-CLK-200-HM 200 mm Discrete Double Wall Hour Minute ID-CLK-300-HM 300 mm Discrete Triple Wall Hour Minute
ID-CLK-140-HMS 140 mm Full Matrix Hour Minute Second ID-CLK-200-HMS 200 mm Discrete Double Wall Hour Minute Second ID-CLK-300-HMS 300 mm Discrete Triple Wall Hour Minute Second
CLK-GPS ADD ON MODULE GPS MODULE FOR CLOCK
CLK-MAS ADD ON MODULE MASTER MODULE FOR BROADCAST
CLK-LAN ADD ON MODULE LAN MODULE FOR NETWORK CLOCK
Outdoor viewing - All Weather Clock Models
Model Digit
height in mm
Format
AW-CLK-140-HM 140 Hour Minute AW-CLK-200-HM 200 Hour Minute AW-CLK-300-HM 300 Hour Minute AW-CLK-450-HM 450 Hour Minute AW-CLK-140-HMS 140 Hour Minute Second AW-CLK-200-HMS 200 Hour Minute Second AW-CLK-300-HMS 300 Hour Minute Second AW-CLK-450-HMS 450 Hour Minute Second
CLK-GPS ADD ON MODULE GPS MODULE FOR CLOCK
CLK-MAS ADD ON MODULE MASTER MODULE FOR BROADCAST
CLK-LAN ADD ON MODULE LAN MODULE FOR NETWORK CLOCK
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected] Note:
1. Colours: a. CLK-140-HM available in RED – Other colours on Request - YELLOW,
GREEN and WHITE colour. Cost for RED is lowest and other cost for other colours will be higher.
b. Other Models available in RED colour 2. Cabinet:
a. The size of the cabinet will be larger than the size of the Display Area b. Cabinet is made from Aluminium profiles c. Mounting provision will be provided appropriately
3. Viewing: a. The clock will have a wide viewing angle b. Brightness is very good under bright outdoor/indoor conditions
4. Communication Interface: a. Simple hand held RF remote for edit/enter of data b. OPTIONAL:
i. Master board can send time to Slave clocks ii. GPS master can send time to Slave Clocks
iii. PC can be installed with software and PC time can be broadcasted to Slaves
iv. Interface available is RS232 / RS485 / LAN v. You have to wire the LED board to your PC using standard
communication cable. 15 meters cable for RS232/RS485 is supplied along with the board.
vi. Connect to nearest LAN hub for Network access. 5. Working:
a. Install the LED clock b. Connect to a 230V Input power source- standard. (Optional 110V AC, 24V
DC etc) c. Edit time with remote. Or else d. Connect to your PC via GPS / RS232 / RS485 or LAN e. For PC based working - Install the PC software in your PC. Open the
Software and start using. f. Standalone clocks are accurate. g. Networked clocks pick up Master time ( GPS or PC) and all clocks will show
same time h. When connection to a slave is interrupted the slave continues running on its
own RTC time and will synchronize with master time once connection is restored.
6. Packing: a. Boards meant for delivery inside Chennai City – Stretch Wrap b. Boards for Export / Long distance / Outstation – Boards are packed inside
Plywood casing with Thermocole/Polystyrene cushioning on all sides. Additionally Rigid supports are placed in corners. Additional stretch wrap is done on top of the Master carton for weather proofing.
7. Warranty and Support: a. High MTBF components are used in the making of the board. The board
electronics are warranted for a period of 12 months from the date of supply.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected] b. Telephone support is available from 9am to 5pm – Indian Standard Time on
all week days. Tel: +91 44 28140444 or +91 98410 73410 c. Email support is available from 9am to 9pm on all days. Mail to
[email protected] for any queries on the working of the LED board. 8. Notes on usage:
a. Place LED clocks away from high EMI areas b. While using outdoors/indoors, protect from Lightning and high voltage. c. Input power supply should be steady and should be protected with suitable
voltage stabilizers / UPS wherever needed. d. Placing a shade on top of the board while using outdoors will enhance
viewing and extend life of board e. Mount the LED board in such a manner – access to service is quick. f. Use good quality connectors at the PC side of the communication cable and
the LED board. 9. Special purpose LED boards:
a. We also supply LED clocks for directly connecting to your instrumentation like PLC / DCS etc
b. Above models can be tailor made to work on your communication Protocol c. We supply ASCII text protocol based displays in the above model numbers
Choosing the right digit height
Height of Digits Viewing distance in Meters Viewing distance in Feet
140 mm 15 50
200 mm 50 150
300 mm 100 325
450 mm 200 650
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
LED Railway coach
Guidance System
We offer complete range of solutions for Train information display including:
1. Coach Name / Train / Destination Display on the Platform.(Coach Guidnace) 2. Coach Name / Train / Destination Display on the Coach. 3. Consolidated Coach Display at the start of the Platform. 4. Train Arrival and Departure information Boards.
The hardware can be built to any specification, from ruggedness to Water and Tamper resistance etc like IP65. The Boards can be driven using RS422 / RS485 or Ethernet / Wifi. We offer Red, Red+Green or Full Color boards.
Our solution also includes the software for driving the boards with minimal
human intervention. The software is written to be easy and intutive to use.
The software has a built in module to allow for displaying advertsiments on
the boards, this is especially usefull for sponsored boards. The units can also
be controlled remotely using a GPRS/3G Data Terminal Unit.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Typical connections for the Coach
Guidance System
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Multi Colour Coach Guidance board For S.C. Railway - Matrix 48 x 64. Three lines three different
colours and control from Customized PC program. Separate areas for Advertising / Fully customizable by User /
different areas can run different content.
Full Colour Coach Guidance board For S.Railway - Matrix 32 x 64. Full color. Any line any colour.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Single colour Coach Guidance board For S.Railway - Matrix 32 x 64. Single colour – RED.
Three Colour Coach Guidance board For S.Railway - Matrix 32 x 64. RED/GREEN/YELLOW colour
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Single colour Coach Guidance board For S.Railway - Matrix 32 x 64. Single colour - YELLOW.
Inside Coach – Destination Display For S.Railway - Matrix 16 x 160. Single colour - RED
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Features: 1. LED Matrix can display any Custom Message in any language along with Digital Clock. 2. Fonts can be Selected. 3. Multiple Custom Messages can be displayed in any language. 4. Single Color and Multicolor Options are available. 5. Brightness levels can be set based on a Day/Night sensor or by Hour of the day. 6. Customizable display with Hour , Minute, Second, Year , Month, Day of week and date
in any combination with the ability to time and scroll the dispay. Optional Components. 1. The Messages can be updated from a PC periodically. 2. Simple to use PC software 3. SEND YOUR MESSAGE IN ANY LANGUAGE 4. The hardware can be built to any specification, from ruggedness to Water and 5. Tamper resistance etc like IP65. 6. The Boards can be driven using RS422 / RS485 or Ethernet / Wifi. 7. The units can also be controlled remotely using a GPRS/3G Data Terminal Unit. 8. We offer Red, Red+Green or Full Color boards. 9. Our soultion also includes the software for driving the boards with minimal human
intervention. The software is written to be easy and intutive to use.
LED General Purpose Single / Multi Color LED Information
Display.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Models
Model Matrix
Display Area Height in mm
Width in mm
Height in
inches
Width in inches
FOS-13 16 * 96 160 960 6.25 37.75 FOS-14 16 * 128 160 1280 6.25 50.25 FOS-15 16 * 160 160 1600 6.25 63.00 FOS-16 16 * 192 160 1920 6.25 75.50 FOS-19 16 * 288 160 2880 6.25 113.25 FOS-23 32 * 96 320 960 12.50 37.75 FOS-24 32 * 128 320 1280 12.50 50.25 FOS-25 32 * 160 320 1600 12.50 63.00 FOS-26 32 * 192 320 1920 12.50 75.50 FOS-29 32 * 288 320 2880 12.50 113.25 FOS-36 48 * 192 480 1920 18.75 75.50 FOS-39 48 * 288 480 2880 18.75 113.25
Note:
1. Colours: a. Single colour boards are available in – RED only. b. Two colour boards - This can display in RED, GREEN and YELLOW color c. Single colour boards also available in YELLOW, GREEN, BLUE and WHITE d. Cost for RED is lowest and other cost for other colours will be higher.
2. Cabinet: a. The size of the cabinet will be larger than the size of the Display Area b. Cabinet is made from Aluminium profiles c. Hanging hooks / mounting clamps will be provided appropriately
3. Viewing: a. The display will have a wide viewing angle b. Brightness is adjustable from PC software for ideal viewing
4. Communication Interface: a. The LED board is supplied along with PC software b. PC software is simple to install and easy to use c. Interface available is RS232 or RS485 - Default d. LAN port is optional – extra cost e. You have to wire the LED board to your PC using standard communication
cable. 15 meters cable for RS232/RS485 is supplied along with the board. 5. Working:
a. Install the LED board b. Connect to a 230V Input power source- standard. (Optional 110V AC, 24V
DC etc) c. Connect to your PC via RS232 / RS485 or LAN d. Install the PC software in your PC e. Open the Software and start using. f. Language support – Our PC software and LED board support all Languages.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
6. Packing: a. Boards meant for delivery inside Chennai City – Stretch Wrap b. Boards for Export / Long distance / Outstation – Boards are packed inside
Plywood casing with Thermocole/Polystyrene cushioning on all sides. Additionally Rigid supports are placed in corners. Additional stretch wrap is done on top of the Master carton for weather proofing.
7. Warranty and Support: a. High MTBF components are used in the making of the board. The board
electronics are warranted for a period of 12 months from the date of supply. b. Telephone support is available from 9am to 5pm – Indian Standard Time on
all week days. Tel: +91 44 28140444 or +91 98410 73410 c. Email support is available from 9am to 9pm on all days. Mail to
[email protected] for any queries on the working of the LED board. 8. Notes on usage:
a. Place LED board away from high EMI areas b. While using outdoors/indoors, protect from Lightning and high voltage. c. Input power supply should be steady and should be protected with suitable
voltage stabilizers / UPS wherever needed. d. Placing a shade on top of the board while using outdoors will enhance
viewing and extend life of board e. Mount the LED board in such a manner – access to service is quick. f. Use good quality connectors at the PC side of the communication cable and
the LED board. 9. Special purpose LED boards:
a. We also supply LED boards for directly connecting to your instrumentation like PLC / DCS etc
b. Above models can be tailor made to work on your communication Protocol c. We supply ASCII text protocol based displays in the above model numbers
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
We offer end to end solutions for displaying Pollution displays: 1. The Data can be read Directly from A2D converters connected to Sensors. 2. The Data can be read from an EXCEL File periodically. The Data can be read from an a Webservice (Website) that has the pollution data.
3. We can display any number of parameters in either a templated board (Labels are printed) on in a general purpose LED board where the Labels are also displayed in the LED Display.
4. The hardware can be built to any specification, from ruggedness to Water and
5. Tamper resistance etc like IP65. 6. The Boards can be driven using RS422 / RS485 or Ethernet / Wifi. 7. The units can also be controlled remotely using a GPRS/3G Data Terminal
Unit. 8. We offer Red, Red+Green or Full Color boards. 9. Our soultion also includes the software for driving the boards with minimal
human intervention. The software is written to be easy and intutive to use.
LED Pollution Display Boards
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Multi-lingual Online Display
DCS Values Online LED
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Multi Colour Full Matrix Display
Multi Colour Full Matrix Display
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Jumbo Single line pollution Monitor
GPRS based Pollution Monitor
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Full Matrix LED board for Pollution Monitoring Models
Model Matrix
Display Area Height in mm
Width in mm
Height in
inches
Width in inches
FOS-36 48 * 192 480 1920 18.75 75.50 FOS-46 64 * 192 640 1920 25.25 75.50 FOS-56 80 * 192 800 1920 31.50 75.50 FOS-66 96 * 192 960 1920 37.75 75.50 FOS-76 112 * 192 1120 1920 44.00 75.50 FOS-86 128 * 192 1280 1920 50.25 75.50
Note:
1. Colours: a. Single colour boards – RED, YELLOW b. Two colour boards - This can display in RED, GREEN and YELLOW color c. Full Colour Boards – Text can be displayed in Multi colour d. Cost for RED is lowest and other cost for other colours will be higher.
2. Cabinet: a. The size of the cabinet will be larger than the size of the Display Area b. Cabinet is made from Aluminium profiles c. Mounting provision will be provided appropriately
3. Viewing: a. The display will have a wide viewing angle b. Brightness is adjustable from PC software for ideal viewing c. Optional – Auto Brightness via Sensor.
4. Communication Interface: a. The LED board is supplied along with PC software b. PC software is simple to install and easy to use c. Interface available is RS232 / RS485 / LAN d. You have to wire the LED board to your PC using standard communication
cable. 15 meters cable for RS232/RS485 is supplied along with the board. e. Connect to nearest LAN hub for Network access.
5. Working: a. Install the LED board b. Connect to a 230V Input power source- standard. (Optional 110V AC, 24V
DC etc) c. Connect to your PC via RS232 / RS485 or LAN d. Install the PC software in your PC e. Open the Software and start using. f. Language support – Our PC software and LED board support all Languages.
6. Packing: a. Boards meant for delivery inside Chennai City – Stretch Wrap b. Boards for Export / Long distance / Outstation – Boards are packed inside
Plywood casing with Thermocole/Polystyrene cushioning on all sides.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Additionally Rigid supports are placed in corners. Additional stretch wrap is done on top of the Master carton for weather proofing.
7. Warranty and Support: a. High MTBF components are used in the making of the board. The board
electronics are warranted for a period of 12 months from the date of supply. b. Telephone support is available from 9am to 5pm – Indian Standard Time on
all week days. Tel: +91 44 28140444 or +91 98410 73410 c. Email support is available from 9am to 9pm on all days. Mail to
[email protected] for any queries on the working of the LED board. 8. Notes on usage:
a. Place LED board away from high EMI areas b. While using outdoors/indoors, protect from Lightning and high voltage. c. Input power supply should be steady and should be protected with suitable
voltage stabilizers / UPS wherever needed. d. Placing a shade on top of the board while using outdoors will enhance
viewing and extend life of board e. Mount the LED board in such a manner – access to service is quick. f. Use good quality connectors at the PC side of the communication cable and
the LED board. 9. Special purpose LED boards:
a. We also supply LED boards for directly connecting to your instrumentation like PLC / DCS etc
b. Above models can be tailor made to work on your communication Protocol c. We supply ASCII text protocol based displays in the above model numbers
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
We offer end to end solutions for tracking production data and displaying them.
LED Production displays, TAKT, and Andon displays
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
1) Shifts , Breaks can be set.
2) Target can be set.
3) Realtime Plan can be calculated based on TAKT / Cycle time.
4) Actual can be measured from a Potential free contact or a Relay or Read from
an Excel file.
5) The boards can include the following Items among many other fields.
a. Target
b. Actual
c. Realtime Plan
d. Gap
e. Efficiency
f. Date / Time
g. Cycle Time
h. Takt
i. Hourly Plan Vs Actual
j. MTD and YTD Plan Vs Actual etc.
6) We can display any number of parameters in either a templated board (Labels
are printed) on in a general purpose LED board where the Labels are also
displayed in the LED Display.
7) The TAKT board can also be networked with a Consolidated display
displaying data from all the individual board that are all over the factory.
8) The display data can also be download to a PC for reporting.
9) The Takt Boards can also be designed to use Jumbo display modules to
increase vsibility for the entire factory.
10) The hardware can be built to any specification, from ruggedness to Water and
Tamper resistance etc like IP65.
11) The Boards can be driven using RS422 / RS485 or Ethernet / Wifi.
12) The units can also be controlled remotely using a GPRS/3G Data Terminal
Unit.
13) We offer Red, Red+Green or Full Color boards.
14) Our soultion also includes the software for driving the boards with minimal
human intervention. The software is written to be easy and intutive to use.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Outdoor – Online Pollution Monitor
Hourly Production Monitor
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Online Proudction Display
Safety Manhour Display
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Garment FTT display
Real Time – TAKT Counter
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Real Time – Stock Movement Display
Simple Production Monitor
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
Note:
1. Colours: a. Production LED boards are available in – RED only. b. We can also make boards using LED boards with display content in different
colours on request. c. Cost for RED is lowest and other cost for other colours will be higher.
2. Cabinet: a. The size of the cabinet will be larger than the size of the Display Area b. Cabinet is made from Aluminium profiles c. Hanging hooks / mounting clamps will be provided appropriately d. Titles will be made with Computer cut vinyls and as per your approved
design. e. Logo (if required to be printed) to be given to us in 300DPI full size for faithful
reproduction. 3. Viewing:
a. The display will have a wide viewing angle b. Brightness is adjustable from PC software for ideal viewing
4. Communication Interface: a. The LED board is usually supplied with a Hand held remote for simple enter /
edit of data. We also make the LED board with customized PC software as per your requirement.
b. Interfaces – IR/ RS232 / RS485 / LAN (OPTIONAL) c. For serial communication - You have to wire the LED board to your PC using
standard communication cable. 15 meters cable for RS232/RS485 is supplied along with the board. For LAN boards, connect board to your nearest LAN hub.
5. Working: a. Install the LED board b. Connect to a 230V Input power source- standard. (Optional 110V AC, 24V
DC etc) c. Connect to your PC via RS232 / RS485 or LAN if PC application board, Else
hand held IR remote. 6. Packing:
a. Boards meant for delivery inside Chennai City – Stretch Wrap b. Boards for Export / Long distance / Outstation – Boards are packed inside
Plywood casing with Thermocole/Polystyrene cushioning on all sides. Additionally Rigid supports are placed in corners. Additional stretch wrap is done on top of the Master carton for weather proofing.
7. Warranty and Support: a. High MTBF components are used in the making of the board. The board
electronics are warranted for a period of 12 months from the date of supply. b. Telephone support is available from 9am to 5pm – Indian Standard Time on
all week days. Tel: +91 44 28140444 or +91 98410 73410 c. Email support is available from 9am to 9pm on all days. Mail to
[email protected] for any queries on the working of the LED board.
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
8. Notes on usage:
a. Place LED board away from high EMI areas b. While using outdoors/indoors, protect from Lightning and high voltage. c. Input power supply should be steady and should be protected with suitable
voltage stabilizers / UPS wherever needed. d. Placing a shade on top of the board while using outdoors will enhance
viewing and extend life of board e. Mount the LED board in such a manner – access to service is quick. f. Use good quality connectors at the PC side of the communication cable and
the LED board. 9. Special purpose LED boards:
a. We also supply LED boards for directly connecting to your instrumentation like PLC / DCS etc
b. Specific LED boards can be tailor made to work on your communication Protocol
c. We supply ASCII text protocol based displays in the above model numbers
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
L.E.D Temperature / Humidity Display
Digital relative humidity & temperature sensor T22
1. Feature & Application:
*High precision *Capacitive type *Full range temperature compensated *Relative humidity and temperature measurement *Calibrated digital signal
2. Description:
*Outstanding long-term stability *Extra components not needed *Long transmission distance, up to 100 meters *Low power consumption *4 pins packaged and fully interchangeable
T22 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements is connected with 8-bit single-chip computer. Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory. Small size & low consumption & long transmission distance(100m) enables T22 to be suited in all kinds of harsh application occasions.
Digital relative humidity & temperature sensor
T22
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
3. Technical Specification:
Model T22 Sensing element Polymer humidity capacitor Operating range humidity 0-100%RH; temperature -40~80Celsius Accuracy humidity +-2%RH(Max +-5%RH); temperature +-0.5Celsius
Resolution or sensitivity humidity 0.1%RH; temperature 0.1Celsius
Repeatability humidity +-1%RH; temperature +-0.2Celsius Humidity hysteresis +-0.3%RH Long-term Stability +-0.5%RH/year Interchangeability fully interchangeable
Kamal & Co
# 42, Mambalam High Road, T.Nagar, Chennai 600017 Tel: +91-44-2814 0111 , 2814 0222 , 2814 0333 , 2814 0444 , 2814 0555 Fax / Tel : +91-44-2814 0814
Web: www.factorydisplay.com www.g-box.in E.Mail: [email protected] [email protected]
CountCountCountCount----Down / CountDown / CountDown / CountDown / Count----Up Up Up Up
TimerTimerTimerTimer
Features:
1. LED Matrix Count down timer and Digital Clock with Custom Message. 2. TXCO Osscilator for the Clock so is resistant to drifts due to temperature
variations. 3. Font Can be Selected. 4. Multiple Custom Messages can be displayed in any language. 5. Single Color and Multicolor Options are available. 6. Brightness levels can be set based on a Day/Night sensor or by Hour of the
day. 7. Customizable display with Hour , Minute, Second, Year , Month, Day of week
and date in any combination with the ability to time and scroll the dispay. Optional Components.
1. The clock can be updated from GPS. 2. The clock can be updated from a PC. 3. The Messages can be updated from a PC periodically. 4. The hardware can be built to any specification, from ruggedness to Water and
Tamper resistance etc like IP65.
The Boards can be driven using RS422 / RS485 or Ethernet / Wifi. The units can also be controlled remotely using a GPRS/3G Data Terminal
Unit. We offer Red, Red+Green or Full Color boards. Our soultion also includes the software for driving the boards with minimal
human intervention. The software is written to be easy and intutive to use.