ARCHITECTURAL METALS / LED REVEALS
| 3www.fryreglet.com
LED
REV
EALS
LED LIGHTING REVEALSSTYLE ILLUMINATED.In high demand, Fry Reglet’s innovative LED light reveal provides a continuous band of
accent illumination. Designed with an integral LED light source, the reveals use traditional
installation methods with 1/2” or 5/8” drywall. LED light reveals install quickly and easily
with simple, low voltage connectors that require no modifications to the framing.
Potential uses range from illuminated way-finding in hospitals and airports to ambient
statements in commercial hospitality, entertainment and retail venues. Reveal profiles
are designed to accommodate a variety of installation preferences including positioning
for upward ceiling illumination, or downward for wall washing and floor illumination.
FEATURES AND BENEFITS
• Extruded aluminum for durability and ease of installation.
• Engineered system includes factory installed LED lighting,
quick disconnect components and low voltage drivers.
• Choice of 2700, 3000, 3500 or 4000 Kelvin temperature.
• Clear anodized or powder coat finish.
4 | www.fryreglet.com
SHAPE FINDER INDEX
Profiles
Pg. 38 Optional AccessoriesPg. 39 Product DetailsPg. 42 LED Installation Detail
Pg. 6 1/2” Lighted RevealPg. 8 3/4” Light RevealPg. 10 4” Light CovePg. 12 4” Light TroughPg. 14 1 1/2” Light Cove
Pg. 16 4” Light BasePg. 18 Flat Light Base 2”-12”Pg. 20 Double LED RevealPg. 22 Lighted Glazing TrackPg. 24 Drywall Molding End Closure
Pg. 26 Lighted U ChannelPg. 28 Lighted Millwork RevealPg. 30 Lighted Millwork Channel w/ Return KeysPg. 32 Lighted Millwork Reveal FPg. 34 Lighted Millwork Channel F w/ Return KeyPg. 36 Lighted Millwork Channel 135O Outside Corner
LED REVEALS
LED MILLWORK
DETAILS
ARCHITECTURAL METALS / LED REVEALS
| 5www.fryreglet.com
1/2” LIGHTED REVEAL 1 1/2” LIGHT COVE3/4” LIGHT REVEAL
4” LIGHT BASE
4” LIGHT COVE
FLAT LIGHT BASE 2”-12”
4” LIGHT TROUGH
DOUBLE LED REVEAL
PG. 6 PG. 14PG. 8
PG. 16
PG. 10
PG. 18
PG. 12
PG. 20
LIGHTED GLAZING TRACK DRYWALL MOLDING END CLOSURE
PG. 22 PG. 24
SHAPE FINDER INDEX
usage
This chart is designed to help you locate a specific shape in the Fry Reglet Shape Finder. Find the shape you want.
Detailed information can be found on the page number above the shape.
LIGHTED MILLWORK REVEAL F
PG. 30
LIGHTED MILLWORKREVEAL
LIGHTED U CHANNEL LIGHTED MILLWORK CHANNEL W/RETURN KEYS
PG. 26 PG. 28
Profiles
LIGHTED MILLWORK CHANNEL F W/RETURN KEY
PG. 32 PG. 34
LIGHTED MILLWORK CHANNEL 135O OUTSIDE CORNER
PG. 36
6 | www.fryreglet.com
1/2” LIGHTED REVEAL
PRODUCT DETAIL
usage
Fry Reglet 1/2” Lighted Reveal installs
in 1/2” or 5/8” drywall and provides a
continuous band of light. 1/2” Lighted
Reveal can be installed in a horizontal,
vertical and ceiling application. Frosted
lens included.
guide specification
Where indicated on drawings, Fry Reglet
RVL5050, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized or powder coat finish. Specify
length and Kelvin temperature.
INSTALLATION DETAIL / ISO View
RVL 50501/2” or 5/8”
Drywall
Metal StudFraming
LED Lens
1/2"
1/2"
Tape & Joint Compound
Integral LEDLight Strip
Metal StudFraming
1/2” or 5/8”Drywall
LED Lens
Integral LEDLight Strip
ARCHITECTURAL METALS / LED REVEALS
| 7www.fryreglet.com
LIGHTING OPTIONS
LED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-RVL5050A2C
4’ LED-RVL5050A4C
6’ LED-RVL5050A6C
8’ LED-RVL5050A8C
10’ LED-RVL5050A10C
3000
2’ LED-RVL5050B2C
4’ LED-RVL5050B4C
6’ LED-RVL5050B6C
8’ LED-RVL5050B8C
10’ LED-RVL5050B10C
3500
2’ LED-RVL5050C2C
4’ LED-RVL5050C4C
6’ LED-RVL5050C6C
8’ LED-RVL5050C8C
10’ LED-RVL5050C10C
4000
2’ LED-RVL5050D2C
4’ LED-RVL5050D4C
6’ LED-RVL5050D6C
8’ LED-RVL5050D8C
10’ LED-RVL5050D10C
1/2” LIGHTED REVEAL
C = CLEAR ANODIZED
P = PAINTED
8 | www.fryreglet.com
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
3/4” LIGHT REVEAL
usage
Fry Reglet 3/4” Light Reveal installs in 1/2” or
5/8” drywall and provides a continuous band of
light. 3/4” Light Reveal can be installed vertically
or horizontally in walls, or ceilings. Frosted lens
included.
guide specification
Where indicated on drawings, Fry Reglet 3/4”
Light Reveal, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
INSTALLATION DETAIL / ISO View
3/4” Light Reveal
1/2” or 5/8”Drywall
Metal StudFraming
4”
13/16"
3/4"
LED Lens
Integral LEDLight Strip
Tape & Joint Compound
Integral LEDLight Strip
Metal StudFraming
1/2"RadiusLED Lens
1/2” or 5/8”Drywall
ARCHITECTURAL METALS / LED REVEALS
| 9www.fryreglet.com
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
3/4” LIGHT REVEALLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-RVL75A2C
4’ LED-RVL75A4C
6’ LED-RVL75A6C
8’ LED-RVL75A8C
10’ LED-RVL75A10C
3000
2’ LED-RVL75B2C
4’ LED-RVL75B4C
6’ LED-RVL75B6C
8’ LED-RVL75B8C
10’ LED-RVL75B10C
3500
2’ LED-RVL75C2C
4’ LED-RVL75C4C
6’ LED-RVL75C6C
8’ LED-RVL75C8C
10’ LED-RVL75C10C
4000
2’ LED-RVL75D2C
4’ LED-RVL75D4C
6’ LED-RVL75D6C
8’ LED-RVL75D8C
10’ LED-RVL75D10C
C = CLEAR ANODIZED
P = PAINTED
10 | www.fryreglet.com
Tape & Joint Compound
Integral LEDLight Strip
Metal StudFraming
1/2” or 5/8”Drywall
LED Lens
usage
Fry Reglet 4” Light Cove installs in 1/2”
or 5/8” drywall and provides a continuous
band of light. Light Cove can be installed to
direct lighting downwards for wall washing or
upwards for ceiling illumination. Frosted lens
included.
guide specification
Where indicated on drawings, Fry Reglet
4” Light Cove, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized or powder coat finish. Specify
length and Kelvin temperature.
INSTALLATION DETAIL / ISO View
4” Light Cove
1/2” or 5/8”Drywall
Metal StudFraming
4” LIGHT COVE
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
LED Lens
Integral LEDLight Strip
4”
4 15/16"2 3/4"
ARCHITECTURAL METALS / LED REVEALS
| 11www.fryreglet.com
LIGHTING OPTIONS4” LIGHT COVE
LED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-CV4A2C
4’ LED-CV4A4C
6’ LED-CV4A6C
8’ LED-CV4A8C
10’ LED-CV4A10C
3000
2’ LED-CV4B2C
4’ LED-CV4B4C
6’ LED-CV4B6C
8’ LED-CV4B8C
10’ LED-CV4B10C
3500
2’ LED-CV4C2C
4’ LED-CV4C4C
6’ LED-CV4C6C
8’ LED-CV4C8C
10’ LED-CV4C10C
4000
2’ LED-CV4D2C
4’ LED-CV4D4C
6’ LED-CV4D6C
8’ LED-CV4D8C
10’ LED-CV4D10C
C = CLEAR ANODIZED
P = PAINTED
12 | www.fryreglet.com
4” LIGHT TROUGH
PRODUCT DETAIL
usage
Fry Reglet 4” Trough installs in 1/2” or 5/8”
drywall and provides a continuous linear
Trough of light at the ceiling. Frosted lens
included.
guide specification
Where indicated on drawings, Fry Reglet 4”
Light Trough, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized or powder coat finish. Specify
length and Kelvin temperature.
INSTALLATION DETAIL / ISO View
Tape & Joint Compound Integral LED
Light Strip
Metal StudFraming
1/2” or 5/8”Drywall
4” Trough
1/2” or 5/8”Drywall
Metal StudFraming
Drywall Ceiling
LED Lens
LED Lens
Integral LEDLight Strip
4"
4"2 3/4"
2"
ARCHITECTURAL METALS / LED REVEALS
| 13www.fryreglet.com
4” LIGHT TROUGH
LIGHTING OPTIONS
LED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-TR4A2C
4’ LED-TR4A4C
6’ LED-TR4A6C
8’ LED-TR4A8C
10’ LED-TR4A10C
3000
2’ LED-TR4B2C
4’ LED-TR4B4C
6’ LED-TR4B6C
8’ LED-TR4B8C
10’ LED-TR4B10C
3500
2’ LED-TR4C2C
4’ LED-TR4C4C
6’ LED-TR4C6C
8’ LED-TR4C8C
10’ LED-TR4C10C
4000
2’ LED-TR4D2C
4’ LED-TR4D4C
6’ LED-TR4D6C
8’ LED-TR4D8C
10’ LED-TR4D10C
C = CLEAR ANODIZED
P = PAINTED
14 | www.fryreglet.com
usage
Fry Reglet 1 1/2” Light Cove installs in 1/2” or
5/8” drywall and provides a continuous band of
light. 1 1/2” Light Cove can be installed to direct
lighting downwards for wall washing or upwards
for ceiling illumination. Frosted lens included.
guide specification
Where indicated on drawings, Fry Reglet
1 1/2” Light Cove, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
INSTALLATION DETAIL / ISO View
1 1/2” Light Cove
1/2” or 5/8”Drywall
Metal StudFraming
4 13/16"1 1/2"
Tape & Joint Compound
Integral LEDLight Strip
Metal StudFraming
1/2” or 5/8”Drywall
LED Lens
Integral LEDLight Strip
LED Lens
1 1/2” LIGHT COVE
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
2 5/8"
ARCHITECTURAL METALS / LED REVEALS
| 15www.fryreglet.com
LIGHTING OPTIONS
1 1/2” LIGHT COVELED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-CV150A2C
4’ LED-CV150A4C
6’ LED-CV150A6C
8’ LED-CV150A8C
10’ LED-CV150A10C
3000
2’ LED-CV150B2C
4’ LED-CV150B4C
6’ LED-CV150B6C
8’ LED-CV150B8C
10’ LED-CV150B10C
3500
2’ LED-CV150C2C
4’ LED-CV150C4C
6’ LED-CV150C6C
8’ LED-CV150C8C
10’ LED-CV150C10C
4000
2’ LED-CV150D2C
4’ LED-CV150D4C
6’ LED-CV150D6C
8’ LED-CV150D8C
10’ LED-CV150D10C
C = CLEAR ANODIZED
P = PAINTED
16 | www.fryreglet.com
usage
Fry Reglet 4” Light Base installs in 1/2” or 5/8”
drywall and provides a continuous band of light
at the base of drywall partitions. Frosted lens
included.
guide specification
Where indicated on drawings, Fry Reglet
4” Light Base, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
INSTALLATION DETAIL / ISO View
4” Light Base
1/2” or 5/8”Drywall
Metal StudFraming
5 13/16”
13/16"
4”
Metal StudFraming
1/2” or 5/8”Drywall
Integral LEDLight Strip
4” Light Base
Tape & Joint Compound
LED Lens
LED Lens
Integral LEDLight Strip
4 5/8"
4” LIGHT BASE
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
ARCHITECTURAL METALS / LED REVEALS
| 17www.fryreglet.com
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
4” LIGHT BASELED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-BS4A2C
4’ LED-BS4A4C
6’ LED-BS4A6C
8’ LED-BS4A8C
10’ LED-BS4A10C
3000
2’ LED-BS4B2C
4’ LED-BS4B4C
6’ LED-BS4B6C
8’ LED-BS4B8C
10’ LED-BS4B10C
3500
2’ LED-BS4C2C
4’ LED-BS4C4C
6’ LED-BS4C6C
8’ LED-BS4C8C
10’ LED-BS4C10C
4000
2’ LED-BS4D2C
4’ LED-BS4D4C
6’ LED-BS4D6C
8’ LED-BS4D8C
10’ LED-BS4D10C
C = CLEAR ANODIZED
P = PAINTED
18 | www.fryreglet.com
usage
Fry Reglet Flat Light Base 2” to 12” installs in
1/2” or 5/8” drywall and provides a continuous
band of light at the base of drywall partitions.
2 - piece system allows for scribing to
accommodate inconsistent floors. Frosted lens
included.
guide specification
Where indicated on drawings, Fry Reglet
Flat Light Base, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
INSTALLATION DETAIL / ISO View
Base Varies2” - 12”
1/2” or 5/8”Drywall
Metal StudFraming
13/16"
Varies2” to 12”
1/2” or 5/8”Drywall
Tape & Joint Compound
Integral LEDLight Strip
Metal StudFraming
FLAT LIGHT BASE 2” - 12”
LED Lens
LED Lens
Integral LEDLight Strip
Varies2” to 12”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Butt Joint
ARCHITECTURAL METALS / LED REVEALS
| 19www.fryreglet.com
LIGHTING OPTIONS
FLAT LIGHT BASE 2” - 12”LED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-FLATBS_A2C
4’ LED-FLATBS_A4C
6’ LED-FLATBS_A6C
8’ LED-FLATBS_A8C
10’ LED-FLATBS_A10C
3000
2’ LED-FLATBS_B2C
4’ LED-FLATBS_B4C
6’ LED-FLATBS_B6C
8’ LED-FLATBS_B8C
10’ LED-FLATBS_B10C
3500
2’ LED-FLATBS_C2C
4’ LED-FLATBS_C4C
6’ LED-FLATBS_C6C
8’ LED-FLATBS_C8C
10’ LED-FLATBS_C10C
4000
2’ LED-FLATBS_D2C
4’ LED-FLATBS_D4C
6’ LED-FLATBS_D6C
8’ LED-FLATBS_D8C
10’ LED-FLATBS_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-FLATBS12A2C/P
Height of part 2” - 12”
20 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
DOUBLE LED REVEAL
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
1 3/8”
9/16”
DIM A
LED Lens
LED Lens
LED Lens
1/2” or 5/8”Drywall
LED Lens
Integral LEDLight Strip
Integral LEDLight Strip
Integral LEDLight Strip
Integral LEDLight Strip5/8” Drywall
5/8” Drywall
Tape & Joint Compound
usage
Fry Reglet Double LED Reveal installs in 5/8”
drywall and provides a continuous, uniform band
of light along the top and bottom edges of the
reveal. Can be used in vertical and horizontal
applications. Frosted lens included.
guide specification
Where indicated on drawings, CDRM Double
Reveal, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
SIZES
DIM A NUMBER
2" LEDCDRM-200
3" LEDCDRM-300
4" LEDCDRM-400
ARCHITECTURAL METALS / LED REVEALS
| 21www.fryreglet.com
LIGHTING OPTIONS
DOUBLE LED REVEALLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-CDRM_A2C
4’ LED-CDRM_A4C
6’ LED-CDRM_A6C
8’ LED-CDRM_A8C
10’ LED-CDRM_A10C
3000
2’ LED-CDRM_B2C
4’ LED-CDRM_B4C
6’ LED-CDRM_B6C
8’ LED-CDRM_B8C
10’ LED-CDRM_B10C
3500
2’ LED-CDRM_C2C
4’ LED-CDRM_C4C
6’ LED-CDRM_C6C
8’ LED-CDRM_C8C
10’ LED-CDRM_C10C
4000
2’ LED-CDRM_D2C
4’ LED-CDRM_D4C
6’ LED-CDRM_D6C
8’ LED-CDRM_D8C
10’ LED-CDRM_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-CDRM400A2C/P
Width of profile
22 | www.fryreglet.com
LIGHTED GLAZING TRACK
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
5/8” Drywall
Integral LEDLight Strip
Integral LEDLight Strip
Metal StudFraming
Metal StudFraming
1 5/16”1/2”
3/4” Glass
Clear Blocking
Gasket
Clear Blocking
3/4” Glass
Gasket
5/8” Drywall
1 11/16”
1”
4 7/8”
Tape & Joint Compound
Tape & Joint Compound
INSTALLATION DETAIL / ISO Viewusage
Fry Reglet Lighted Glazing Track is designed for
5/8” drywall and provides a continuous band of
light along the bottom edge of glass panels. For
horizontal applications. Frosted lens included.
See A10 for End Closure details.
guide specification
Where indicated on drawings, DMGT Lighted
Glazing Track, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
ARCHITECTURAL METALS / LED REVEALS
| 23www.fryreglet.com
LIGHTING OPTIONS
LIGHTED GLAZING TRACKLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-DMGT_A2C
4’ LED-DMGT_A4C
6’ LED-DMGT_A6C
8’ LED-DMGT_A8C
10’ LED-DMGT_A10C
3000
2’ LED-DMGT_B2C
4’ LED-DMGT_B4C
6’ LED-DMGT_B6C
8’ LED-DMGT_B8C
10’ LED-DMGT_B10C
3500
2’ LED-DMGT_C2C
4’ LED-DMGT_C4C
6’ LED-DMGT_C6C
8’ LED-DMGT_C8C
10’ LED-DMGT_C10C
4000
2’ LED-DMGT_D2C
4’ LED-DMGT_D4C
6’ LED-DMGT_D6C
8’ LED-DMGT_D8C
10’ LED-DMGT_D10C
C = CLEAR ANODIZED
P = PAINTED
24 | www.fryreglet.com
DRYWALL MOLDINGEND CLOSURE
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Drywall Molding End Closure
accommodates 5/8” drywall and is designed to
trim vertical sides of glazed openings when used
with LED – DMGT Lighted Glazing Track.
guide specification
Where indicated on drawings, DMEC Drywall
Molding End Closure, as manufactured by Fry
Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized or powder coat finish. Refer to finish
section.
4 7/8”
7/8”
5/8” Drywall
5/8” Drywall
DMECEnd Closure
DMEC End Closure
3/4” Glass
3/4” Glass
LED - Lighted Glazing Track
LED - Lighted Glazing Track
ARCHITECTURAL METALS / LED REVEALS
| 25www.fryreglet.com
LEVIS STORE - ATLANTA, GA (LIGHTED MILLWORK REVEAL)
26 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED U CHANNEL
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
DIM A
1/2” 5/8”
SubstrateMillwork Panel
LED Lens Integral LEDLight Strip
Substrate
Millwork Panel
LED Lens
Integral LEDLight Strip
SIZES
DIM A NUMBER
1/2" LED-MWU5050
3/4" LED-MWU7550
1" LED-MWU10050
usage
Fry Reglet Lighted U Channel installs in 1/2”,
3/4” or 1” Millwork and provides a continuous
band of light horizontally or vertically. Frosted
lens included.
guide specification
Where indicated on drawings, Fry Reglet Lighted
U Channel, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
ARCHITECTURAL METALS / LED REVEALS
| 27www.fryreglet.com
LIGHTING OPTIONS
LIGHTED U CHANNELLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWU_A2C
4’ LED-MWU_A4C
6’ LED-MWU_A6C
8’ LED-MWU_A8C
10’ LED-MWU_A10C
3000
2’ LED-MWU_B2C
4’ LED-MWU_B4C
6’ LED-MWU_B6C
8’ LED-MWU_B8C
10’ LED-MWU_B10C
3500
2’ LED-MWU_C2C
4’ LED-MWU_C4C
6’ LED-MWU_C6C
8’ LED-MWU_C8C
10’ LED-MWU_C10C
4000
2’ LED-MWU_D2C
4’ LED-MWU_D4C
6’ LED-MWU_D6C
8’ LED-MWU_D8C
10’ LED-MWU_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWU10050A2C/P
Depth of profile
28 | www.fryreglet.com
LIGHTED MILLWORK REVEAL
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Lighted Millwork Reveal installs with
1/2”, 3/4” or 1” millwork panels and provides a
continuous band of light horizontally or vertically.
Frosted lens included.
guide specification
Where indicated on drawings, Fry Reglet
Lighted Millwork Reveal, as manufactured by Fry
Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized or powder coat finish. Specify length
and Kelvin temperature.
Substrate
Millwork Panel
1/4” Cleat
1/4” Cleat
LED Lens
DIM A
2 3/8”1/2”
7/8”
Integral LEDLight Strip
Substrate
Millwork Panel
1/4” Cleat
LED Lens Integral LEDLight Strip
1/4” Cleat
SIZES
DIM A NUMBER
1/2" LED-MWR5050
3/4" LED-MWR7550
1" LED-MWR10050
INSTALLATION DETAIL / ISO View
ARCHITECTURAL METALS / LED REVEALS
| 29www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK REVEALLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWR_A2C
4’ LED-MWR_A4C
6’ LED-MWR_A6C
8’ LED-MWR_A8C
10’ LED-MWR_A10C
3000
2’ LED-MWR_B2C
4’ LED-MWR_B4C
6’ LED-MWR_B6C
8’ LED-MWR_B8C
10’ LED-MWR_B10C
3500
2’ LED-MWR_C2C
4’ LED-MWR_C4C
6’ LED-MWR_C6C
8’ LED-MWR_C8C
10’ LED-MWR_C10C
4000
2’ LED-MWR_D2C
4’ LED-MWR_D4C
6’ LED-MWR_D6C
8’ LED-MWR_D8C
10’ LED-MWR_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWR10050A2C/P
Depth of profile
30 | www.fryreglet.com
LIGHTED MILLWORK CHANNEL
W/ RETURN KEYS
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SubstrateMillwork Panel
1/4” Cleat
LED Lens
DIM A
1/2”
3/16”
7/8”
Integral LEDLight Strip
2 3/8”
Substrate
Millwork Panel
1/4” Cleat
LED Lens Integral LEDLight Strip
1/4” Cleat
usage
Fry Reglet Lighted Millwork Channel with
exposed return keys installs with 1/2”, 3/4” or
1” millwork panels, features exposed return
keys to cover cut edges of millwork panels, and
provides a continuous band of light horizontally
or vertically. Frosted lens included.
guide specification
Where indicated on drawings, Lighted
Millwork Channel with exposed return keys, as
manufactured by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded alloy 6063
T5, with clear anodized or powder coat finish.
Specify length and Kelvin temperature.
SIZES
DIM A NUMBER
1/2" LED-MWC5050
3/4" LED-MWC7550
1" LED-MWC10050
INSTALLATION DETAIL / ISO View
ARCHITECTURAL METALS / LED REVEALS
| 31www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK CHANNELW/ RETURN KEYSLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWC_A2C
4’ LED-MWC_A4C
6’ LED-MWC_A6C
8’ LED-MWC_A8C
10’ LED-MWC_A10C
3000
2’ LED-MWC_B2C
4’ LED-MWC_B4C
6’ LED-MWC_B6C
8’ LED-MWC_B8C
10’ LED-MWC_B10C
3500
2’ LED-MWC_C2C
4’ LED-MWC_C4C
6’ LED-MWC_C6C
8’ LED-MWC_C8C
10’ LED-MWC_C10C
4000
2’ LED-MWC_D2C
4’ LED-MWC_D4C
6’ LED-MWC_D6C
8’ LED-MWC_D8C
10’ LED-MWC_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWC10050A2C/P
Depth of profile
32 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK REVEAL F
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Millwork Panel
Millwork Panel
1/4” Cleat
1/4” Cleat
LED Lens
DIM A 1 1/2”
1/2”
7/8”
Integral LEDLight Strip
Integral LEDLight Strip
LED Lens
usage
Fry Reglet Lighted Millwork Reveal F installs with
1/2”, 3/4” or 1” millwork panels and provides a
continuous band of light horizontally or vertically
at ends of millwork. Frosted lens included.
guide specification
Where indicated on drawings, Lighted Millwork
Reveal F, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized
or powder coat finish. Specify length and Kelvin
temperature.
SIZES
DIM A NUMBER
1/2" LED-MWRF5050
3/4" LED-MWRF7550
1" LED-MWRF10050
ARCHITECTURAL METALS / LED REVEALS
| 33www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK REVEAL FLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWRF_A2C
4’ LED-MWRF_A4C
6’ LED-MWRF_A6C
8’ LED-MWRF_A8C
10’ LED-MWRF_A10C
3000
2’ LED-MWRF_B2C
4’ LED-MWRF_B4C
6’ LED-MWRF_B6C
8’ LED-MWRF_B8C
10’ LED-MWRF_B10C
3500
2’ LED-MWRF_C2C
4’ LED-MWRF_C4C
6’ LED-MWRF_C6C
8’ LED-MWRF_C8C
10’ LED-MWRF_C10C
4000
2’ LED-MWRF_D2C
4’ LED-MWRF_D4C
6’ LED-MWRF_D6C
8’ LED-MWRF_D8C
10’ LED-MWRF_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWRF10050A2C/P
Depth of profile
34 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK CHANNEL F
W/ RETURN KEY
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Millwork Panel
Millwork Panel
1/4” Cleat
LED Lens
LED Lens
DIM A1 1/2”
1/2”
7/8”
Integral LEDLight Strip
Integral LEDLight Strip
SIZES
DIM A NUMBER
1/2" LED-MWCF5050
3/4" LED-MWCF7550
1" LED-MWCF10050
1/4” Cleat
usage
Fry Reglet Lighted Millwork Channel F with
exposed return key installs with 1/2”, 3/4” or
1” millwork panels, features an exposed return
key to cover cut edges of millwork panels, and
provides a continuous band of light horizontally
or vertically. Frosted lens included.
guide specification
Where indicated on drawings, Lighted
Millwork Channel F with exposed return key, as
manufactured by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded alloy 6063
T5, with clear anodized or powder coat finish.
Specify length and Kelvin temperature.
ARCHITECTURAL METALS / LED REVEALS
| 35www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK CHANNEL FW/ RETURN KEYLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWCF_A2C
4’ LED-MWCF_A4C
6’ LED-MWCF_A6C
8’ LED-MWCF_A8C
10’ LED-MWCF_A10C
3000
2’ LED-MWCF_B2C
4’ LED-MWCF_B4C
6’ LED-MWCF_B6C
8’ LED-MWCF_B8C
10’ LED-MWCF_B10C
3500
2’ LED-MWCF_C2C
4’ LED-MWCF_C4C
6’ LED-MWCF_C6C
8’ LED-MWCF_C8C
10’ LED-MWCF_C10C
4000
2’ LED-MWCF_D2C
4’ LED-MWCF_D4C
6’ LED-MWCF_D6C
8’ LED-MWCF_D8C
10’ LED-MWCF_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWCF10050A2C/P
Depth of profile
36 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK CHANNEL 135O
OUTSIDE CORNER
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Integral LEDLight Strip
Integral LEDLight Strip
Millwork Panel
135O
1 3/16”2 9/16”
1/2”
DIM A
LED Lens
LED Lens
Millwork Panel
usage
Fry Reglet Lighted Millwork Channel 135O
Outside Corner installs with 1/2”, 3/4” or 1”
millwork panels, ensures a straight and true
outside corner, and provides a continuous band
of light vertically at corners of millwork. Frosted
lens included.
guide specification
Where indicated on drawings, Lighted Millwork
Channel 135O Outside Corner, as manufactured
by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized or powder coat finish.
Specify length and Kelvin temperature.
SIZES
DIM A NUMBER
1/2" LED-MWROSC5050
3/4" LED-MWROSC7550
1" LED-MWROSC10050
1/4” Cleat
1/4” Cleat
ARCHITECTURAL METALS / LED REVEALS
| 37www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK CHANNEL 135O
OUTSIDE CORNERLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWROSC_A2C
4’ LED-MWROSC_A4C
6’ LED-MWROSC_A6C
8’ LED-MWROSC_A8C
10’ LED-MWROSC_A10C
3000
2’ LED-MWROSC_B2C
4’ LED-MWROSC_B4C
6’ LED-MWROSC_B6C
8’ LED-MWROSC_B8C
10’ LED-MWROSC_B10C
3500
2’ LED-MWROSC_C2C
4’ LED-MWROSC_C4C
6’ LED-MWROSC_C6C
8’ LED-MWROSC_C8C
10’ LED-MWROSC_C10C
4000
2’ LED-MWROSC_D2C
4’ LED-MWROSC_D4C
6’ LED-MWROSC_D6C
8’ LED-MWROSC_D8C
10’ LED-MWROSC_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWCOSC10050A2C/P
Depth of profile
38 | www.fryreglet.com
OPTIONAL ACCESSORIES
Single Rocker Pad - Self Powered Wireless Control
LED-DIMMER SWITCH
Power Supply Electrodynamic harvesting
Inputs / Outputs 1 Button Rocker SwitchRadio Frenquency (RF) Transmitter
Transmission Range 80ft. (25m)
RF Transmission On Press and Release of Rocker Button
Dimensions 3.8”H x 3.4”W x .85”D
Weight 3.5oz.
Mounting Surface mounted on wall (using included mount-ing screws) Can also be flush mounted by option-al use of electrical wall box or low-voltage ring.
Invironment Indoor use only
32° to 131° F (0° to 55°C)5% to 95% relative humidity (non-condensing)
Agency Listing FCC, I.C.
Single Channel Lighting Control Module
LED-RELAY
Range 150 feet (50-150 typical)
Profile A5-38-08 Type 0x02 Dimming
Input Voltage 120/277 VAC
Max Switch Power 3300W @ 277VAC
Max Switch Current 20A
Relay Output 1 N.O. and 1 Common ontact
Dimmer Output 0-10V 30mA (sinking drivers)
Ambient Operating Temperature 37°C for 3300 W load @ 277 VAC
Certifications ETL/Intertek - UL 244AFCC United States) SZV-TCM3XXXIC Canada) 5713A-TCMXXX
Dimensions 2.939” x 2.319” x 1.25”
ARCHITECTURAL METALS / LED REVEALS
| 39www.fryreglet.com
ORDERING CODES
EXAMPLE BASE PART NUMBER
HEIGHT COLOR TEMPERATURE
LENGTH FINISH
4” Light Cove
(Part # LED-CV4A2C)LED-CV4 2700 (A) 2’
Clear
Anodized (C)
1 1/2” Light Cove
(Part # LED-CV150B4P)LED-CV150 3000 (B) 4’ Painted (P)
3/4” Light Reveal
(Part # LED-RVL75C6C)LED-RVL75 3500 (C) 6’
Clear
Anodized (C)
4” Light Base
(Part # LED-BS4D8P) LED-BS4 4000 (D) 8’ Painted (P)
Reveal 5050
(Part # LED-RVL5050A10C)LED-RVL5050 2700 (A) 10’
Clear
Anodized (C)
2-12” Flat Base
(Part # LED-FLATBS6B8C)LED-FLATBS 6’ 3000 (B) 8’
Clear
Anodized (C)
PRODUCT DETAIL
Fry Reglet 1.5 inch Cuttable LED Strip
ETL Listed to 2108 Low Voltage Lighting Products
LEDs/ft 32
Luminous Flux 2700K, 3000K, 3500K, 4000k 550lm
Power Consumption 3.84W/ft
Segment Length 1.5”
Segment Width .39”
Maximum Run Length 20’
Input Voltage 24V
Input Current 0.02Amps / Segment
LED’s per Segment 4
Flux 550lm/ft
LED Samsung2835 / SPMWH1221FD5GBUMSB
Binning Center Quarter Bin Mix (3 step) MacAdam Ellipse
Beam Angle 120°
CRI 80
CCT 2700K, 3000K, 3500K, 4000k
UL ETL Listed to UL 2108
Substrate Polyimide
IP Rating IP20
40 | www.fryreglet.com
PRODUCT DETAIL
POWER SUPPLY
MODEL LED-PWM-90-24 (6.75” x 2 1/2” x 1 1/2”)
OUTPUT DC VOLTAGE 24V
RATED CURRENT 3.7A
RATED POWER 90W
DIMMING RANGE 0~100%
PWM FREQUENCY (Typ.) 300Hz
VOLTAGE TOLERANCE ±3.0%
SETUP, RISE TIME (Note 2) 500ms, 80ms 115VAC / 230VAC at full load
HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load
INPUT VOLTAGE RANGE 90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE 47 ~ 63HZ
POWER FACTOR PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load
TOTAL HARMONIC DISTOR-TION
THD<20% when output loading≥60% at 115VAC/230VAC input and output loading≥75% at 277VAC input
EFFICIENCY (Typ.) 90.5%
AC CURRENT 0.95A / 115AC 0.5A / 230VAC 0.4A / 277VAC
INRUSH Current (Typ.) COLD START 60A(twidth=520µs measured at 50% ipeak) at 230VAC
MAX> NO. of PSU’s on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.25mA / 277VAC
PROTECTION OVERLOAD 108 ~120% RATED OUTPUT POWER
Protection type: Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 28 ~34V
Protection type: Shut down o/p voltage, re-power on to recovery
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
ENVIRON-MENT
WORKING TEMPERATURE -40 ~ +70°C
WORKING HUMIDITY 20 ~ 95% RH non condensing
STORAGE TEMP. HUMIDITY -40 ~ +80°C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 ~50°)
VIBRATION 10 ~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
SAFETY STANDARDS UL8750, CSA C22.2 No. 250.13-12, ENEC EN61374-1; EN61347-2-13, EN62384 indepen-dent, IP67 approved; Design refer to EN60335-1
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC/ 25°C / 70% RH
EMC EMISSIONS Compliance to EN55015, EM61000-3-2 Class C (≥60% load) ; EN61000-3-3
EMC IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547, light industry level(surge L-N : 2KV) criteria A
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase set up time.
ARCHITECTURAL METALS / LED REVEALS
| 41www.fryreglet.com
PRODUCT DETAIL
ACCESSORIESFIELD-CUT CONNECTORS
A - FLEXIBLE Each extruded profile is shipped with
integral LED light strips factory installed,
and a 3” long flexible connector for
attachment to abutting profile.
B - RIDGED CONNECTOR
C - FLEXIBLE POWER FEEDPower feed connector is required for
each continuous run of 90 Watts, for
connection to the power supply. Power
feed connectors are sold separately.
D - “L” CONNECTOR
A
C
B
D
42 | www.fryreglet.com
INSTALLATION DETAIL
Integral LED Light Strip
Integral LEDLight Strip
Flexible Connector
3/4” Light Reveal
3/4” Light Reveal
Integral LEDLight Strip
LED - Driver
To 120 Power Source
LED - REVEAL TO REVEAL CONNECTION DETAIL
LED - REVEAL TO DRIVER CONNECTION DETAIL
LED Lens LED Lens
LED Lens
Power Feed
ARCHITECTURAL METALS / LED REVEALS
| 43www.fryreglet.com
Field Cut Notch (1” x 2”) in Drywall to Accept Connectors
LED Strip & Flexible ConnectorDrywall
TUCK EXCESS LED STRIP AND FLEXIBLE CONNECTION IN DRYWALL NOTCH
BUTT PROFILES TOGETHER, TAPE AND FINISH AS REQUIRED
Drywall
INSTALLATION DETAIL