63 190/181/182/187/188/191/192 190 ... T 190 ... TB LED-Catalogue 2018/19 Subject to technical changes, misprints and errors. Dustproof/Waterproof Light Fittings LED-Sheet Steel Light Fittings Series 190/191/192/181/182/187/188… Application: Industrial, tradesmen’s and commer- cial facilities with extreme conditions, aggressive environments (e.g. oil, grease) or high mechanical exposure, production areas and warehouses, for locations with high ambient temperatures, for areas with extreme dust appearance (types 187/188), areas with high downtime and maintenance costs due to lamp change. Design: Housing: Sheet steel, light grey, powder coated. Safety glass: Frameless, frosted, internal hinge, tiltable. Reflector: Aluminium painted, with LED-modules and all electrical compo- nents screwed to the glass, wired ready for connection. Central locking: Internal, to be opened from outside with 5mm allen key. Terminal: 5-pole terminal, clamping range 2.5 mm 2 max. Cable entries: 3 x M20 (190... LED) or 3 x M25 (2 cable gland and 2 blanking plugs), looping the cable at one side possible. Mounting: 190 ...: 2 fixing holes Ø 9mm, Sealing and pressure disks included. Use mounting screws ø 6mm. 181/182 ...: For suspension eyes with bolts (H8VP) or ceiling brackets (15AP) (not included), see „Accessories / Spare Parts”. 187/188 ...: 2 eyebolts (RS6) included. 191/192 ...: 4 mounting brackets included. Additional mounting material see „Accessories / Spare Parts”. Technical data: LED: Line-modules 4,000K; CRI>80, life expectancy L 80 > 50,000 hours (at max. ambient temperature) ECG: 220-240V, 50/60Hz, overload and short circuit protection Ambient temperature: -20°C up to see table of articles SCHUCH Quality - Your advantage: • especially suitable for rough industrial application – robust, smooth sheet steel housing with all latches inside the housing – permanent safe closing due to frameless safety glass pane with internal Original SCHUCH-central locking system • highest efficiency with Luminous efficacy output up to 142 lm/W • maximum energy cost saving by using dimmable types • depending on suitable version for operation in ambient temperatures up to maximum 55°C • reflector and cover in sandwich design to protect the LED-Modules from mechanical or electrost- atic damages due to accidential contact • immediate light with max. luminous flux • uniform illumination due to frosted safety glass pane, comfortable light perception, excellent glare limitation • high colour rendering CRI > 80, according to the work place guidelines suitable for nearly all branches • with „D”-sign, therefore suitable for applications in rooms/locations with increased fire risk due to flam- mable dusts and fibers. • low maintenance and downtime costs due to almost maintenance-free • future-proof due to use of standardized LED-modules (Zhaga) Options: – for low ambient temperatures down to -40°C – dimmable version with DALI interface (DIMD) – for connection to central or group battery system (ZB) – for use in blasting locations or cabins (181/182... SSK) – clear safety glass for high light point hights (K) – in stainless steel, powder coated – with frame, retrofitable (181/182…, 191/192…) – with clear PC pane, according to „In- ternational Featured Standard Food” (181/182... IFS and 191/192...IFS) Note: In case of permanently humid atmosphere please ask for stainless steel housings. Notes: Properties, limitations and details for cont- rolling LED-light fittings: See “Technical Supplement” All technical data is relevant at the time of print. Actual technical data can be found in the internet under www.schuch.de. !
Transcript
63
190/181/182/187/188/191/192 190 ... T 190 ... TB
LED-Catalogue 2018/19Subject to technical changes, misprints and errors.
Application:Industrial, tradesmen’s and commer-cial facilities with extreme conditions, aggressive environments (e.g. oil, grease) or high mechanical exposure, production areas and warehouses, for locations with high ambient temperatures, for areas with extreme dust appearance (types 187/188), areas with high downtime and maintenance costs due to lamp change.Design:Housing: Sheet steel, light grey, powder coated. Safety glass: Frameless, frosted, internal hinge, tiltable. Reflector: Aluminium painted, with LED-modules and all electrical compo-nents screwed to the glass, wired ready for connection.Central locking: Internal, to be opened from outside with 5mm allen key.
Terminal: 5-pole terminal, clamping range 2.5 mm2 max.Cable entries: 3 x M20 (190... LED) or 3 x M25 (2 cable gland and 2 blanking plugs), looping the cable at one side possible.Mounting: 190 ...: 2 fixing holes Ø 9mm,Sealing and pressure disks included.Use mounting screws ø 6mm.181/182 ...: For suspension eyes with bolts (H8VP) or ceiling brackets (15AP) (not included), see „Accessories / Spare Parts”.187/188 ...: 2 eyebolts (RS6) included.191/192 ...: 4 mounting brackets included.Additional mounting material see„Accessories / Spare Parts”.
ambient temperature)ECG: 220-240V, 50/60Hz, overload and short circuit protectionAmbient temperature: -20°C up to see table of articles
SCHUCH Quality - Your advantage:
• especially suitable for rough industrial application – robust, smooth sheet steel housing with all latches inside the housing – permanent safe closing due to frameless safety glass pane with internal Original
SCHUCH-central locking system • highest efficiency with Luminous efficacy output up to 142 lm/W • maximum energy cost saving by using dimmable types • depending on suitable version for operation in ambient temperatures up to maximum 55°C • reflector and cover in sandwich design to protect the LED-Modules from mechanical or electrost-
atic damages due to accidential contact • immediate light with max. luminous flux • uniform illumination due to frosted safety glass pane, comfortable light perception, excellent glare limitation • high colour rendering CRI > 80, according to the work place guidelines suitable for nearly all branches • with „D”-sign, therefore suitable for applications in rooms/locations with increased fire risk due to flam-
mable dusts and fibers. • low maintenance and downtime costs due to almost maintenance-free • future-proof due to use of standardized LED-modules (Zhaga)
Options:– for low ambient temperatures down to
-40°C – dimmable version with
DALI interface (DIMD)– for connection to central or
group battery system (ZB)– for use in blasting locations or cabins
(181/182... SSK)
– clear safety glass for high light point hights (K)
– in stainless steel, powder coated– with frame, retrofitable (181/182…,
191/192…)– with clear PC pane, according to „In-
ternational Featured Standard Food” (181/182... IFS and 191/192...IFS)
Note:In case of permanently humid atmosphere please ask for stainless steel housings.
Notes:
Properties, limitations and details for cont-rolling LED-light fittings:
See “Technical Supplement”
All technical data is relevant at the time of print. Actual technical data can be found in the internet under www.schuch.de.
!
64
190 ... LED IP65
19002 0010 190 12L40 1 30 4.150 138 60 A++ 1 x 36 / 1 x 58 8,5
19002 0011 190 12L60 1 44 6.100 139 55 A++ 2 x 36 / 2 x 58 8,7
181/182 ... LED IP65
+55°C/+45°C
0°C
+55°C/+35°C
0°C
191/192 ... LED IP65+45°C/+30°C
0°C
191 ... T LED IP65
19105 0010 191 12L120 2 89 12.600 142 50 A++ 2 x 58 bzw. 2 x 35 / 1 x 80 17,419105 0012 191 15L150 3 113 15.700 139 50 A++ 3 x 58 bzw. 4 x 35 / 3 x 49 / 2 x 80 20,219105 0014 192 12L160 3 121 16.550 137 50 A++ 3 x 58 bzw. 4 x 35 / 3 x 49 / 2 x 80 23,719105 0016 192 15L200 4 151 20.800 138 50 A++ 3 x 58 bzw. 4 x 49 / 3 x 80 26,7
19105 0011 191 12L190 3 134 18.700 140 40 A++ 4 x 36 bzw. 3 x 58 17,219105 0013 191 15L240 3 168 23.400 139 35 A++ 4 x 58 bzw. 4 x 54 / 3 x 80 20,219105 0015 192 12L250 4 180 24.600 137 40 A++ 4 x 58 bzw. 4 x 54 / 3 x 80 22,919105 0017 192 15L310 4 226 30.550 135 35 A++ 4 x 80 26,7
LED-Catalogue 2018/19Subject to technical changes, misprints and errors.
Article No. Type
for all lamp lengths, consisting of 2 swivel brackets and screws M8stainless steel version for all lamp lengths, consisting of 2 swivel brackets and screws M8
Frame for Recessed MountingLight fittings of the series 181 / 182... and 191 / 192... can also be adapted for flush mounting in ceilings or walls using a separately supplied frame. The light fitting is mounted using M5 screws along the long sides (see dimension drawing).).
Note:When inquiring / ordering, please state the type of
ceiling in which the light fitting is to be mounted. With certain ceiling designs, it may be necessary to move the cable entry to the rear of the light fitting.
Mounting possibilities:– in suspended ceilings (standard, when no specificati-
on is given).– in recesses in concrete walls.– in insulated ceilings acc. to EN 60598
Swivel Arm Mounting SystemLight fittings series 181 / 182... can also be adapted for swivel mounting using separately supplied swivel arm mounting accessories. The swivel mounting brackets are screwed to the light fitting at the suspension points.Swivel angle ± 75° (see dimension drawing).
