18
Stelvio Mini Stelvio LED street lighting
Stelvio Mini StelvioLED street lighting
2
Mini Stelvio IP66 IK08Stelvio IP66 IK08
Stelvio / Mini Stelvio
Designed for maximum reliability
The Stelvio/Mini Stelvio family of products wasdesigned without the constraints imposed byconventional technology, but rather with anapproach that focuses on tangible application resultsand the technological possibilities offered by modernsemiconductors and their electronic supply andcontrol systems. The photometric measurements to be used forlighting calculations can be downloaded from ourwebsite at www.disano.it
Technical specifications
Housing and frame: in die-cast aluminium anddesigned with a very small surface exposed to thewind. Cooling fins integrated into the cover.Pole connection: in die-cast aluminium, equippedwith gaskets to secure the frame according todifferent inclinations. Adjustable from 0° to 15° forside mount; and from 0° to 10° for mast-topmounting. Inclination angle of 5° for poles with adiameter of 63-60 mm.Diffuser: transparent glass, 4 mm thick, tempered,resistant to thermal shocks and impacts (UNI-EN12150-1: 2001).Coating: powder-coated with polyester resin,resistant to corrosion and saline environments.Standard supply: automatic temperature controldevice inside the lamp with automatic recovery.Safety diode to protect against voltage peakspursuant to EN 61547. With dedicated electronicdevice to protect the LED module.Equipment: complete with watertight IP67 connecterfor line connection. Supplied with a double-insulatedswitch that shuts off electricity every time the cover isopened. Anti-condensation valve for air recirculation.
Two different sizes for more versatility
3
4
5°5° 15°15° 25°25°35°35°
45°45°
55°55°
65°65°
75°75°
85°85°
95°95°
105°105°
115°115°
150
300
450
600
750cd/Klm
352535
25ϒ
9025
270
155180
cd/Klm
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°5° 5° 15°
65°65°
115°
150
300
450
600
75035
2535
25ϒ
9020
270
160
180
50
100
150
200
250
300
350
400
450
500
30 60 90 cd/klm
+ efficiency + emission
14 LED
18 LED
22 LED
Stelvio 3270 3274
7560 Im
9720 Im
11880 Im
53 W
69 W
84 W
10290 Im
13230 Im
16170 Im
82 W
105 W
129 W
110 W
141 W
173 W
13720 Im
17640 Im
21560 Im
350 mA 530 mA 700 mA Colour temperature
Colour rendering index
4000 K CRI ≥70
LED module efficiency 140 Im/W 125 Im/W 125 Im/W
70% luminous flux maintenance after 50,000 hrs (L70B20)
3270 Stelvio
3273 Stelvio
3274 Stelvio
Stelvio
Outstanding photometric performance
This product was designed with an optical systemcapable of controlling the potential glare created bythe growing light intensity of LEDs while achievinghigh photometric performance. This allows the application in street lighting schemeswhere there is a significant distance between thepoles. Combined optical system made in highperformance PMMA, resistant to high temperatureand UV radiation. Flux recovery systems in metallicV0 polycarbonate.
Using a lower current will improve the efficiency offixtures and therefore increase energy savings, whilsta higher current will result in a higher light flux sothat you can reduce the number of fixtures.
Always use the power you need
The modular optical system and the possibility tochoose the correct drive current for LEDs will alwaysallow you to have the right power under specificdesign conditions, and also help you deal withmaintenance and retrofitting problems.
code (700 mA)
330344-00
330345-00
330347-00
code (700 mA)
330342-00
330343-00
330348-00
code (700 mA)
320360-00
320361-00
320363-00
36 LED
54 LED
72 LED
Stelvio 3273
9612 Im
14418 Im
19224 Im
70 W
105 W
140 W
700 mA Colour temperature
Colour rendering index
4000 K CRI ≥70
LED module efficiency 140 Im/W
70% luminous flux maintenance after 60,000 hrs (L70B20)
5
Street lighting comparison, distance between fixtures 27 m at a height of 8 m
A range of professional luminaires
Energy efficiency and energy saving
Consuming less energy without giving up thebenefits of technological progress. This is the greatchallenge for the future of our planet. This is because greater energy efficiency means lowerconsumption without compromising light quality.Being able to distinguish colours and perceive cleardetails when transiting on urban streets help improvethe safety of drivers and pedestrians. In addition,lights that mimic daylight will improve the perceptionof faces and increase our sense of safety. Thanks towhite LED light, cities are safer and more liveableeven after dusk.
Fast connectors
Anti-condensation valve
Suited toaccommodatephotocell
Horizontal tempered glass, 4 mm thick, 100% shock-resistant for cut-offUNI EN 12150-1 2001
IP 67 connector for quickinstallation
Adjustable universalconnector (top or side mount)
250 W
289 W
100 %
25000 Im
173 W
182 W
63 %
21560 Im
power
total power
total power (%)
luminous flux
StelvioJM 250Metal Halide Lamps
37%savings %
6
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°15°
65°65°
115°
180
270
360
90
cd/Klm4505° 5°
90
270180
13
12
34 5
678
91011
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°15°
65°65°
115°
500
750
1000
250
cd/Klm
1250
9030
270
150
180
1611
16
21
212631
+ efficiency + emission
14 LED
32 LED
48 LED
Mini Stelvio 3269 3277 3278 3279
2290 Im
4548 Im
6864 Im
15 W
31 W
46 W
3410 Im
6816 Im
10224 Im
23 W
47 W
70 W
31 W
63 W
94 W
4274 Im
8544 Im
12480 Im
LED module efficiency
350 mA 530 mA 700 mA Colour temperature
Colour rendering index
150 Im/W 145 Im/W 135 Im/W
4000 K CRI ≥70
70% luminous flux maintenance after >50,000 hrs (L70B50)
3275 Mini Stelvio Plus
3269 Mini Stelvio Fx T5 Examples of installation:code (700 mA)
330460-00
330461-00
330463-00
code (700 mA)
330360-00
330361-00
330362-00
24 LED
36 LED
48 LED
Mini Stelvio 3275 3276
3430 Im
5150 Im
6860 Im
23 W
34 W
46 W
6410 Im
9600 Im
12800 Im
47 W
70 W
94 W
LED module efficiency
350 mA 700 mA Colour temperature
Colour rendering index
150 Im/W 140 Im/W
4000 K CRI ≥70
70% luminous flux maintenance after 60,000 hrs (L70B20)
A full range of photometric solutions designed to control potential glare and achieve high levels of photometricperformance.
Mini Stelvio
Using a lower current will improve the efficiency offixtures and therefore increase energy savings, whilsta higher current will result in a higher light flux sothat you can reduce the number of fixtures.
Always use the power you need
The modular optical system and the possibility tochoose the correct drive current for LEDs will alwaysallow you to have the right power under specificdesign conditions, and also help you deal withmaintenance and retrofitting problems.
7
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°5° 5° 15°
65°65°
115°
160
240
320
80
cd/Klm400
90
270180
38
1
1
1
6
611
16 1621 26
263136
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°15°
65°65°
115°
300
450
600
150
cd/Klm7505° 5°
352535
25ϒ
9015
270
165
180
1
611 16
212631
3641465156
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°15°
65°65°
115°
400
600
800
200
cd/Klm10005° 5°
352535
25ϒ
9020
270
160
180
16
6
1116
21
26
313641
115°105°95°85°75°
55°
45°
35°
105°95°85°75°
55°
45°
35°25° 15° 25°5° 5° 15°
65°65°
115°
200
300
400
100
cd/Klm500
90
270180
37
1
1
611
1616
21
2131
3276 Mini Stelvio Plus Examples of installation:
3278 Mini Stelvio Fx T3
3279 Mini Stelvio Fx T4
3277 Mini Stelvio Fx T2
code (700 mA)
330370-00
330371-00
330372-00
code (700 mA)
330380-00
330381-00
330383-00
code (700 mA)
330390-00
330391-00
330393-00
code (700 mA)
330450-00
330451-00
330453-00
Street lighting comparison, distance between fixtures 27 m at a height of 8 m
250 W
275 W
100 %
13000 Im
63 W
68 W
25 %
8544 Im (700 mA)
power
total power
total power (%)
luminous flux
Mini StelvioHG 250 WMercury Vapour Lamps
75%savings %
60%
40%
20%
80%
100%
10.000 20.000 30.000 40.000 50.000 60.000h
8
State-of-the-art technology
The Stelvio / Mini Stelvio line was designed with aseries of features and solutions to maximise theduration of the lamp’s life:Use of the best available LEDs and power suppliesModular optics with electronic circuits equipped withbypass circuit (in case of defects in singlesemiconductors) Overheating control system with automatic reductionof currentAnti-condensation valveVersion with safety device against peak powerbeyond 10 KW available on request Low temperature electronicsAll these features help to extend lamp life past50,000 hours.
Life expectancy
LEDs, unlike traditional sources, will not turn offsuddenly when their working life ends, but willslowly fade their initial luminous flux until they turnoff completely. In fact, LEDs do not break (except formanufacturing damages) but decay gradually andconstantly.The decrease of LED flux is defined by the workinglife and is represented by the L80 mark (see chart),which means that the flux is kept up to 80%.The “B” letter followed by a number rangingbetween 10 and 50 indicates the quality of thefixture and defines the LED percentage that keepsthe declared characteristics when it reaches 50,000working hours.
EXAMPLE: LED declared L80/B10 = 50,000 hrs This means that when the LED reaches 50,000hours of operation, 90% (B10) of the LED willhave a luminous flux corresponding to 80% ofthe initial flux (L80)
luminous flux %
9
Reduced resistance to wind
The fixture’s design is configured to minimise wind-exposed surfaces. 400 sqcm of side surfaces for Mini Stelvio, 470 sqcm for Stelvio.
Photobiological safety
We often read about photobiological safety inlighting design. This very important factor isdetermined by the amount of radiations emitted byall the sources with a wave length ranging between200 nm and 3000 nm. Excessive radiation exposurecan be harmful for human health. The EN62471standard classifies light sources into risk groups. RG0 (exempt risk group): the lighting source isexempt from risks in compliance with EN 62471Standard.RG1 (low risk group): no risk deriving from a limitedemission of radiation.RG2 (moderate risk): the lighting source does notpose hazards because of our aversion response tovery bright light sources, or due to the fact that wewould experience thermal discomfort.The products of the Stelvio / Mini Stelvio rangebelong to the RG0 group (exempt risk group).
Heat dissipation
The heat dissipation system was designed andmanufactured to allow LED operation at adequatetemperatures and guarantee excellentperformance/efficiency and long life.
10
Virtual midnightStand-alone system with automatic flux reduction
(subcode -30)
1-10V dimming10%-100% dimming
with 1-10V system (subcode -12)
Light dimming
In order to exploit the energy-saving potential of LEDtechnology, lighting fixtures are equipped with aninternal electronic system comprising amicroprocessor which controls the luminous fluxfrom zero to 100%, making energy savings increaseaccordingly.This will enable users to operate a lighting fixture atreduced power rates in specific applications,according to programmable periods of time usingdedicated sensors, such as light sensors or presencedetectors.In particular, according to the UNI-11248:2007 roadstandard, it is possible to classify roads dynamicallyinto two categories, and reduce the luminous flux atnight when traffic is low.Dynamic light is also recommended for less crowdedplaces like underground car parks and underpasses.
Programmable lighting control systems
At the customer’s request, the Stelvio / Mini Stelviorange of products can be equipped with a specialdevice to dim the lighting flux during the night-timewithout the need to install additional infrastructure.These fixtures can be installed into existing luminairesin the place of traditional street lighting systems,increasing energy savings resulting from the use ofLEDs, with the automatic night-time dimmingfunction.The device is capable of performing up to 5 night-time dimming steps; the system is supplied alreadyprogrammed by Disano illuminazione and the userdoes not need to perform any type of programmingduring installation.
11
Smart Lighting
Light only when and where it is needed
Point-to-point control, management and diagnosis system
(subcode -0078)
Point-to-point control, management and diagnosis system with Wi-Fi
technology (upon request)
Power line carrier remote controlsystems
A special control system can be inserted inside thelighting fixture or into the lamp pole to monitor theproduct’s operating parameters.This type of remote control system is called “point-to-point”. A “point-to-point” system is basedon the power line carrier (PLC) technology thatenables a digital two-way communication betweenthe module installed in the fixture and the controlsystem. The control system is located inside thecontrol panel. The digital data are adjusted to themains voltage, so no BUS or extra conductors areneeded.Thanks to this “point-to-point” system, it is possible,for example, to monitor and save the fixture’selectrical parameters and, based on these settings,generate failures or alarms, turn off/on or adjust thefixture’s brightness. This is done through eithermanual or pre-set commands.The communication between the control centre (PC)and the “point-to-point” system occurs through acontrol panel using normal communication channels(GSM-GPRS-LAN network, etc.).
Wi-Fi remote control
LED lighting also comes with Wi-Fi connectivity. TheLEDs in Stelvio and Mini Stelvio can be “controlled”via the system’s remote control or smartphones.
12
MBF 125
Mini Stelvio 3275
125
47 8
8 8
8 25.0
25.0 0.52
0.63
W Width H Distance Cd/m2 P (w) P/km
51
140 5600
2000
MBF 125 W Mercury Vapour LED Mini Stelvio 32756000 W/Km
4500 W/Km
3000 W/Km
1500 W/Km
500 W/Km
0 W/Km
Comparison of consumptions on a ME5 road (C2 type of asphalt):
-63.7%
MBF 250
Mini Stelvio 3278
250
63 8
8 8
8 27.0
27.0 0.74
0.85
W Width H Distance Cd/m2 P (w) P/km
68
280 10400
2500
MBF 250 W Mercury Vapour LED Mini Stelvio 327810500 W/Km
7500 W/Km
5000 W/Km
2500 W/Km
500 W/Km
0 W/Km
Comparison of consumptions on a ME4b road (C2 type of asphalt):
-75.7%
Advantages in replacing old luminaires
The replacement of obsolete lighting systems basedon mercury vapour fixtures (still very common inresidential zones despite being outdated and poorlyefficient), will enable to reduce energy consumptionsby 50-60%, while increasing the light output to thelevels currently required by applicable legislation,without the need to modify neither the poles nor thesystems. With the modularity offered by Stelvio andMINI Stelvio fixtures you can always choose the exactamount of power necessary to deliver the rightlighting levels without over-dimensioning andtherefore wasting energy.
13
SAP 100
Mini Stelvio 3275
100
94 8
8 8
8 38.0
35.0 0.79
0.82
W Width H Distance Cd/m2 P (w) P/km
101
115 3300
2700
SAP 100 W High Pressure Sodium LED Mini Stelvio 32755000 W/Km
4000 W/Km
3000 W/Km
2000 W/Km
1000 W/Km
0 W/Km
Comparison of consumptions on a ME4b road (C2 type of asphalt):
-19.1%
SAP 150
Stelvio 3270
150
173 8
8 8
8 30.0
21.0 1.7
1.6
W Width H Distance Cd/m2 P (w) P/km
182
170 8100
6100
SAP 150 W High Pressure Sodium LED Stelvio 327010000 W/Km
8000 W/Km
6000 W/Km
4000 W/Km
2000 W/Km
0 W/Km
Comparison of consumptions on a ME4b road (C2 type of asphalt):
-25%
Advantages in installing new projects
Using Stelvio and Mini Stelvio LED lights instead ofhigh-pressure sodium luminaires enables you toobtain the same lighting results, reducing power andconsumptions by 25%-30% depending on the typeof road. Compared to high pressure sodium, LEDtechnology will significantly improve both the qualityof the light (which is white and not yellow) and thecolour rendering; moreover regular maintenance isno longer needed.Thanks to high performance LED optics (reflector +auxiliary lens), Stelvio and Mini Stelvio LED fixturescan be used along roads and keeping the samedistance between poles, like for high-pressuresodium lamps. In this way you can save energywithout increasing the number of light fixtures.
14
LED, 700 mA, 4000 K CRI≥70
Installation along urban roads and pedestrian crossings
Installation along extra-urban roads and cycle lanes
Mini Stelvio
Mini Stelvio asymmetric
LED, 700 mA, 4000 K CRI≥70
6410 lm47 W24 LED
9600 lm70 W36 LED
12800 lm94 W48 LED
6410 lm47 W24 LED
9600 lm70 W36 LED
12800 lm94 W48 LED
15
LED, 700 mA, 4000 K CRI≥70
Installation in parking areas
Installation along urban roads and roundabouts
Stelvio
Mini Stelvio Fx T5
LED, 700 mA, 4000 K CRI≥70
13720 lm110 W14 LED
17640 lm141 W18 LED
21560 lm173 W22 LED
4274 lm31 W16 LED
8544 lm63 W32 LED
12480 lm84 W48 LED
Disano illuminazione spa
viale Lombardia 12920089 Rozzano, Milan, Italytel +39 02 824771 (20 lines)fax +39 02 [email protected]
www.disano.itDisano illuminazione S.p.A. reserves the right to change the technical characteristics described in this document without prior notice, in order to im
prove the design and supply the best products.
