+ All Categories
Home > Documents > LED Tubes At-A-Glance - W. W. Grainger€¦ · LED Tubes At-A-Glance Designed to fit in fixtures...

LED Tubes At-A-Glance - W. W. Grainger€¦ · LED Tubes At-A-Glance Designed to fit in fixtures...

Date post: 24-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
LED Tubes At-A-Glance Designed to fit in fixtures intended for linear fluorescent lamps (LFLs), LED tubes from GE are a smart, efficient and long-lasting solution to replace traditional lighting. GE Lighting offers two solutions. To ensure the lamp you choose is the best for your application and to help your decision be easier and more informed, here is a quick rundown of those choices. LED Tube with Integrated Driver Wired to Existing LFL Ballast LED Tube with Remote Driver LED Tube with Integrated Driver Wired to Mains ! Delivers lowest installation cost. No rewiring required for installation Medium installation cost. Requires rewiring for installation Limited dimming capabilities Controllable dimming system Limited dimming capabilities Reduced system efficacy Best system efficacy Higher system efficacy than UL Type A System compatibility dependent upon LFL ballast Life dependent on LED tube and LFL ballast Good system compatibility between LED tube and driver Low-voltage connection to sockets minimizes shock hazard Additional safety processes required due to high-voltage wires LED Tube with integrated Lightech driver LED Tube with remote Lightech driver GE does not anticipate that it will offer UL Type B tubes in North America. UL TYPE A UL TYPE B GE LIGHTING’S SOLUTION UL TYPE C GE LIGHTING’S SOLUTION To learn more about the best lighting solution for your needs, visit www.gelighting.com/refitsolutions or schedule a free lighting audit from GE today! Medium installation cost. Requires rewiring for installation Optimal system compatibility between GE LED tube and GE Lightech driver GE Recommends - Easiest Installation GE Recommends - Best Performance Not Recommended + Note: Instant-start ballasts require changing the lamp holder Two icons (above) represent Best-In-Class feature + www.gelighting.com GE and the GE Monogram are trademarks of the General Electric Company. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. © 2014 GE Lighting. 14688 (Rev 07/28/14)
Transcript
Page 1: LED Tubes At-A-Glance - W. W. Grainger€¦ · LED Tubes At-A-Glance Designed to fit in fixtures intended for linear fluorescent lamps (LFLs), LED tubes from GE are a smart, efficient

LED Tubes At-A-GlanceDesigned to fit in fixtures intended for linear fluorescent lamps (LFLs), LED tubes from GE are a smart , efficient and long-lasting solution to replace traditional lighting.

GE Lighting offers two solutions. To ensure the lamp you choose is the best for your application and to help your decision be easier and more informed, here is a quick rundown of those choices.

LED Tube with Integrated Driver Wired to Existing LFL Ballast

LED Tube with Remote DriverLED Tube with Integrated Driver Wired to Mains

! ! !

! ! !

! ! !

!

!

!

!

Delivers lowest installation cost. No rewiring required for installation

Medium installation cost. Requires rewiring for installation

Limited dimming capabilities

Controllable dimming system

Limited dimming capabilities

Reduced system efficacy Best system efficacyHigher system efficacy than UL Type A

System compatibility dependent upon LFL ballast

Life dependent on LED tube and LFL ballast

Good system compatibility between LED tube and driver

Low-voltage connection to sockets minimizes shock hazard

Additional safety processes required due to high-voltage wires

LED Tube with integrated Lightech™ driver

LED Tube with remote Lightech™ driver

GE does not anticipate that it will offer UL Type B tubes in North America.

UL TYPE A UL TYPE B

GE LIGHTING’S SOLUTION

UL TYPE C

GE LIGHTING’S SOLUTION

To learn more about the best lighting solution for your needs, visit www.gelighting.com/refitsolutions or schedule a free lighting audit from GE today!

Medium installation cost. Requires rewiring for installation

Optimal system compatibility between GE LED tube and GE Lightech driver

GE Recommends - Easiest Installation GE Recommends - Best PerformanceNot Recommended

!!

!

+

!

!

Note: Instant-start ballasts require changing the lamp holder

Two icons (above) represent Best-In-Class feature

!

+

www.gelighting.comGE and the GE Monogram are trademarks of the General Electric Company. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. © 2014 GE Lighting.

14688 (Rev 07/28/14)

Recommended