LEDalux LED Wall Packs

LED WaLL pack spEcification shEEts

LEDALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.LEDALUX.com

catalog number:

notes:

fixture type:

project:

Product Specifications

APPLICATION Perimeter lighting for safety and security. Use on factories,warehouses, self storage, commercial buildings, etc. CONSTRUCTIONThe LEDalux LXSM106 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM106 provides ideal light distribution, and the LEDs are protected by a high-impact, heat resistant borosilicate glass refractor. LEDSThe LXSM106 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 20 or 30 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM106 Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPT conduit entry points. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.

Benefits & Features • 27 or 41 Watts Total Driver Consumption

• 90 Lumens per Watt

• Up to 50,000 Rated Life

• 1700 to 2550 Initial Lumens

• 4700K - Color Temperature

• Optional Photocontrol Available

• IP65 Rated

LXSM106MEDIUM DIE-CAST ALUMINUM LED WALL PACK

9.29"

7.13"

14.4"

13.4"

Approximate Weight: 10 lbs.

Photometrics

Model LED Watts Volts Accessories

LXSM106 20 = 20 Watts DT = 120/277V WG106 = Wire Guard

30 = 30 Watts PG106 = Polycarbonate Guard

FC106 = Full Cutoff Shield

RL106 = Replacement Glass Lens

Ordering Example: LXSM106-30-DT-WG106

Ordering Information


catalog number:

notes:

fixture type:

project:


APPLICATION Architectural wallpack stylish Trapezoid shape with molded lines to accentuate building architecture. Provides excellent illumination in several wattages. CONSTRUCTIONThe LEDalux LXSM301 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM301 provides ideal light distribution, and the LEDs are protected by a high-impact, heat resistant tempered glass lens. LEDSThe LXSM301 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 21, 30, 39 or 48 watt LED light engine featuring a 5100K color temperature. The LXSM301 accepts an input voltage of 120/277VAC and has an operating temperature range of -20°C (-4°F) to 40°C (104°F). The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATION The LEDalux LXSM301 Series is ideal for mounting to any vertical surface and features a rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.

Benefits & Features • 26, 37, 41 or 60 Watts Total Driver Consumption


• Up to 50,000 Hour Rated Life

• 2100, 3000, 4050 or 5000 Nominal Initial Lumens



• IP65 Rated

LXSM301ARCHITECTURAL TRAPEzOID, FULL CUTOFF LED WALL PACK

7"

7"

16.75"

13.25"

Photometrics


LXSM301 21 = 21 Watts DT = 120/277V PC1 = 120V Photocontrol

30 = 30 Watts PC2 = 208-277V Photocontrol

39 = 39 Watts

48 = 48 Watts

Ordering Example: LXSM301-48-DT-PC1



catalog number:

notes:

fixture type:

project:


APPLICATION Architectural wallpack stylish Radius shape with molded lines to accentuate building architecture. Provides excellent illumination in several LED wattages. CONSTRUCTIONThe LEDalux LXSM302 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM302 provides ideal light distribution, and the LEDs are protected by a high-impact, heat resistant tempered glass lens. LEDSThe LXSM302 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or 48 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM302 Series is ideal for mounting to any vertical surface and features a rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.




• 2550 or 5000 Initial Lumens



• IP65 Rated

LXSM302ARCHITECTURAL HALf-MOON, fULL CUTOff LED WALL PACK

7.25"

9"

Photometrics






18.5"


catalog number:

notes:

fixture type:

project:


ApplicAtions Designed for entry and perimeter lighting from mounting heights of 8-12ft. Use where full cutoff light control is required. typical applications are commercial, multi-family and high end residential locations. constRUctionthe lEDalux lXsM303 series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is ip65 Rated. Enclosure and hardware are corrosion resistant. the lXsM303 provides ideal light distribution, and the lEDs are protected by a high-impact, heat resistant tempered glass lens. lEDsthe lXsM303 uses a high power lED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or 48 watt lED light engine, accepts an input voltage of 120/277VAc and has an operating temperature range of -30° c to 40°c. the lED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHs compliant). lED circuits are temperature and current controlled to prevent premature failure. instAllAtionthe lEDalux lXsM303 series is ideal for mounting to any vertical surface and features a rugged die-cast aluminum mounting plate. can be wired to a 4’’ junction box. WARRAntYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.

Benefits & Features • 40 or 60 Watts total Driver consumption

• 100 lumens per Watt

• Up to 50,000 Rated life

• 2550 or 5000 initial lumens

• 5100K - color temperature

• optional photocontrol Available

• ip65 Rated

lXsM303ARcHitEctURAl qUARtER-spHERE, FUll cUtoFF lED WAll pAcK

Photometrics


lXsM303 30 = 30 Watts Dt = 120/277V pc1 = 120V photocontrol

48 = 48 Watts pc2 = 208-277V photocontrol

ordering Example: lXsM303-48-Dt


18.1"

9.05"

9.05"

Weight: 13 lbs.Approximate


catalog number:

notes:

fixture type:

project:


APPLICATION Full cut-off IDA compliant perimeter or entry lighting installations that require high light output and maximum energy efficiency. LED wallpacks provide low installation costs with little or no maintenance and great energy savings. Ideal for schools, factories, hospitals, warehouses and retail applications. CONSTRUCTIONThe LEDalux LXSM304 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM304 provides ideal light distribution, and the LEDs are protected by a high-impact, heat resistant tempered glass lens. LEDSThe LXSM304 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with either a 30 or 48 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM304 Series is ideal for mounting to any vertical surface and features a rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.




• 2550 or 5000 Initial Lumens



• IP65 Rated

LXSM304ARCHITECTURAL HALF OVAL, FULL CUTOFF LED WALL PACK

Photometrics




Ordering Example: LXSM304-48-PC1


ApproximateWeight: 15 lbs.

18.1"

9.1"

9.1"


catalog number:

notes:

fixture type:

project:



APPLICATION Entry or perimeter security lighting applications for commercial buildings, shopping centers, schools, and apartment complexes. CONSTRUCTIONThe LEDalux LXSM352 Series features a durable, vandal-resistant, injection molded polycarbonate enclosure with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM352 provides ideal light distribution, and the LEDs are protected by a high-impact, UV stabilized polycarbonate prismatic refractor. LEDSThe LXSM352 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 10 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM352 Series is ideal for mounting to any vertical surface and features a rugged die-cast aluminum mounting plate. Can be wired to a 4’’ junction box, or surface mounted using the 1/2’’ NPT conduit entry point. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.

Benefits & Features • 14 Watts Total Driver Consumption



• 650 Initial Lumens



• IP65 Rated

LXSM352

Photometrics



PC2 = 208-277V Photocontrol



11"

7" 5"

MINI POLYCARBONATE LED WALL PACK


catalog number:

notes:

fixture type:

project:



APPLICATION Entry or single story perimeter lighting for safety, security and identity. Use on commercial buildings, shopping centers, schools, apartment complexes as well as non-supervised vandal prone applications. CONSTRUCTIONThe LEDalux LXSM362 Series features a durable, vandal-resistant, injection molded polycarbonate cover and die-cast aluminum backplate with an architectural bronze finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM362 provides ideal light distribution, and the LEDs are protected by a high-impact, UV stabilized polycarbonate prismatic refractor. LEDSThe LXSM362 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 20 watt LED light engine, accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM362 Series is ideal for mounting to any vertical surface. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPT conduit entry points. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.







• IP65 Rated

LXSM362

Photometrics






12.28"

8.67" 5.8"

MINI POLYCARBONATE LED WALL PACK


catalog number:

notes:

fixture type:

project:

APPROX. WEIGHT: 8 lbs.


APPLICATION Perimeter lighting for safety and security. Use on factories, warehouses, self storage, commercial buildings, etc. CONSTRUCTIONThe LEDalux LXSM765 Series features a durable, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is IP65 Rated. Enclosure and hardware are corrosion resistant. The LXSM765 provides ideal light distribution, and the LEDs are protected by a high-impact, heat resistant tempered glass lens. LEDSThe LXSM765 uses a high power LED light engine with a constant current control and a rated life of up to 50,000 hours with 70% lumen maintenance. Available with a 10 watt LED light engine, the LXSM765 accepts an input voltage of 120/277VAC and has an operating temperature range of -30° C to 40°C. The LED light engine emits extremely low UV, minimal heat and contains no mercury or lead (RoHS compliant). LED circuits are temperature and current controlled to prevent premature failure. INSTALLATIONThe LEDalux LXSM765 Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPT conduit entry points. WARRANTYAny housing component that fails due to manufacturer’s defect is guaranteed for two years from time of shipment. Light element and driver are warrantied for five years from time of shipment. Warranty does not apply to damages caused by improper installation, abuse, fire or acts of God.







• IP65 Rated

LXSM765

Photometrics






8.86"

8.74" 7.5"

DECORATIVE, CUTOFF, DIE-CAST ALUMINUM LED WALL PACK

Model Kelvin Temp Options

LXWPA15L15 2700K WG = Wire Guard

6500K PC1 = Button PhotoCell 120V PC2 = Button PhotoCell 277VOrdering Example: LXWPA15L15-2700K-PC1

Product Information

Product Specifics

Light Distribution Characteristics

Light Source High Power LED’s

Lumen Output 2000 Lumens

Equivalent Source 70W MH

Color Rendering Index (CRI) >80

Total Wattage Draw 24WOperating Temp -40 degrees to 110 degrees F

Input Voltage 120/277 VAC, 50/60hz

Color Temperature 2700K or 6500K

Fixture Weight 10 Lbs.

Beam Angle 120 Degrees

Rated Life 75,000 Hours

Warranty 5 Year Limited

Ratings CSA-Wet Locations, CE, IP65

IES Classification Type IV

Longitudinal Classification Very Short

Cutoff Classification Semi-Cutoff

Total Rated Lamp Lumens 2000

Maximum Candela 210

Maximum Candela Angle 330H 40V

Maximum Candela At 90˚ Vertical 98 (2.54% Lamp Lms)


Downward Total Efficiency 14.1%

Benefits & Features• Die-cast aluminum housing with stainless steel fasteners

• Dark Bronze Finish

• Prismatic Lens Refractor, made of heat and shock resistant borosilicate glass

• Patented Heat-sink Technology

• Instant “on” with no re-strike delay

• Cold Starting

• Solid-State, long-life LED’s

• Greater Visibility with Increased Lumen Efficiency

• Standard 120/277 VAC input

• Shock and Vibration Resistant

• Significant Operational Savings - 80% Over HID

• Energy Efficient and Maintenance-Free for over 5 years

• LED life is more than five times that of HPS

• Eco-Friendly, Eliminate Hazardous Disposal

• Reduced Light Trespass - Dark Sky Compliant

• CSA: Listed for wet locations

• IP65 for wet locations

Applications:

The Wall Pack Series LXWPA15L15 LED area lighting fixture features High Powered Light Emitting Diodes (LED’s). LED technology, with its inherent energy efficiency, provides an excellent solution to inefficient, high maintenance technologies. The solid-state design renders LED’s impervious to electrical and mechanical shock, vibration, frequent switching and environmental extremes.With an average life span of 75,000-plus hours, LED’s operate reliably year after year and are virtually maintenance free.

Commercial BuildingsHospitalsSchoolsSecurity, Pathway and Perimeter Lighting

11.125"

12"

7.875"

catalog number:

notes:

fixture type:

project:

WALL PACK SERIES - LXWPA15L15


catalog number:

notes:

fixture type:

project:




Product Information

Product Specifics










Beam Angle 120 Degrees (x)




IES Type IV

Longitudinal Very Short

Cutoff Semi-Cutoff


Maximum Candela 275




Downward Total 14.1%

Benefits & Features • Die-cast aluminum housing with stainless steel fasteners





• Cold Starting


• Greater Visibility with Increased Lumen



• Operational Savings - 80% Over HID

• Energy and Maintenance-Free for over 5 years

• LED life is more than times that of HPS





Applications:

The Wall Pack Series LXWPA15L48 LED area lighting features High Powered Light Emitting Diodes (LED’s). LED technology, with its inherent energy provides an excellent solution to high maintenance technologies. The solid-state design renders LED’s impervious to electrical and mechanical shock, vibration, frequent switching and environmental extremes.With an average life span of 75,000-plus hours, LED’s operate reliably year after year and are virtually maintenance free.



11.125"

12"

7.875"


catalog number:

notes:

fixture type:

project:




Product Information

Product Specifics










Beam Angle 120 Degrees (x)




IES Type IV

Longitudinal Very Short

Cutoff Semi-Cutoff


Maximum Candela 345




Downward Total 14.1%

Benefits & Features • Die-cast aluminum housing with stainless steel fasteners





• Cold Starting


• Greater Visibility with Increased Lumen



• Operational Savings - 80% Over HID

• Energy and Maintenance-Free for over 5 years

• LED life is more than times that of HPS





Applications:

The Wall Pack Series LXWPA15L60 LED area lighting features High Powered Light Emitting Diodes (LED’s). LED technology, with its inherent energy provides an excellent solution to high maintenance technologies. The solid-state design renders LED’s impervious to electrical and mechanical shock, vibration, frequent switching and environmental extremes.With an average life span of 75,000-plus hours, LED’s operate reliably year after year and are virtually maintenance free.



11.125"

12"

7.875"

a Division of Mule lighting, inc.

46 Baker st. Providence, Ri 02905

toll free: 800.556.7690tel: 401.941.4446fax: 401.941.2929

[email protected]

LEDalux, a Division of Mule Lighting, Inc. is committed to growth through the continued advancement of LED technology. Our products will significantly reduce energy consumption and provide superior lighting solutions to the global lighting market.

Date post:	09-Mar-2016
Category:	Documents
Upload:	mule-lighting-inc
View:	220 times
Download:	2 times

LEDalux LED Wall Packs

Documents