LegacyP

CAT-LEGACY-EN, Rev. 07-2017

CatalogLegacyTM System

Page #

Table of Contents

30 Laboratory, Gold, Plastic and Titanium Abutments

27-28 SMART PACKS, Transfers, Analogs

18-23 Selection Chart: Implants, Abutments, Components

Contoured Titanium and Zirconia Abutments

29

Implant Design 1-5

Implant Details6-15

Labeling 16-17

Cover Screws, Healing Collars, Transfers, Analogs

24-26

Surgical and Prosthetic Instruments

36-39

SMART PACKS, Multi-Unit and Ball Abutments34

18-19SMARTbase CAD/CAM 31

32 Scan Adapters, LOCATOR® Abutments, Components

18-19Selection Chart: Overdenture and Screw-Retained Restorations 33

18-19Surgical Tray 40-41

18-19Components for Overdenture and Screw-Retained Restorations

35

1

The bodies of the Legacy™1, Legacy™2, Legacy™3 and Legacy™4 implants are tapered to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Legacy system implants. Mini-threads start 1.0mm below the crest of the bone and extend for 2.0-2.5mm before transitioning into Double-Lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the Double-Lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while Double-Lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend up the implant from the apex for self-tapping insertion.

Mini-Threads with Double-Lead Threads for Faster Insertion

Double Lead

Threads

Quadruple Lead Mini-

Threads

Implant Design

0.4mm

0.8mm

3.0 Deg.ID Taper

The 1.5o taper to the OD of the Legacy™1, 2, 3 & 4 implants

facilitate soft bone expansion for increased stability.

All Legacy implants have mini-threads for reduced stress near the

crest of bone and Double-Lead threads on the body for 2X faster insertion

Animal Studies Bone Response to SBM Surface

SBM Surface 50X

HA Surface 50X

SBM Surface 20X

HA Surface 20X

SEM Examination of Our SurfacesMini-threads textured by blasting with SBM: Blasted with Soluble HA ParticlesHA Coating: High Crystalline 40u layer

1.5 Deg. OD Taper

1.5 Deg. OD Taper

Buttress ThreadButtress ThreadStandard V-Thread

0.3mm

0.6mm0.8mm

0.4mm

5.0 Deg.ID Taper

1.5 Deg.OD Taper

Legacy™2 and Legacy™4 Implants

Legacy™1 threads provide the same 1.5o taper to the inside (ID) and outside thread (OD) diameters

SBM and HA Coated Surface OptionsSBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for SBM and HA coated surface treatments as used by Paragon Implant Company from 1992-2000 when these studies were conducted.

Legacy™2, 3 & 4 provide more thread engagement by tapering the inside thread diameter (ID) at 3o & 5 o while the outside

thread diameter (OD) tapers at 1.5o

Brazilian Study* Shows SBM Provides Superior Bone Contact

Mean Percentage of Bone Contact%

80

70

60

50

40

30

20

10

SBM HA TPS Machined

62.7558.89

48.9141.70

LSU Study* Shows SBMProvides Superior Bone Contact%

80

70

60

50

40

30

20

10

SBM HA TPS Machined

63.8

57.6 52.7

36

*Data on file*Data on file

2

0.25mmL Bevel

Legacy™1 Implant Design

5.7mmD Body

5.7mmD Platform

5.7mmD Platform with a 3.0mmD Internal Hex

5.7mmD Legacy™15.1mmD Apex Diameter

1.5mm Hex Depth

Double-Lead V-Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

4.7mmD Body

4.5mmD Platform

4.5mmD Platform witha 2.5mmD Internal Hex

4.7mmD Legacy™14.1mmD Apex Diameter

Double-Lead V-Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

1.5mm Hex Depth

1-72UNF Internal Thread

HA

HA SBM Texture

SBM Texture

1-72UNF Internal Thread

Taper starts at 1.0mm

Taper starts at 1.0mm

0.25mmL Bevel

4.2mmD Legacy™13.6mmD Apex Diameter

Double-Lead V-Threads

1-72UNF Internal Thread

2.0mmL Zone Mini-threads

HA

3.7mmD Body

4.2mmD Body

3.5mmD Platform

with a 2.5mmD Internal

Hex

1.5mm Hex Depth

0.25mmL Bevel

3.7mmD Legacy™13.1mmD Apex Diameter

Double-Lead V-Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

SBM Texture

1-72UNF Internal Thread

HA

Taper starts at 1.0mm

Length + 0.25mm

SBM Texture

Taper starts at 1.0mm

3

0.25mmL Bevel0.25mmL Bevel

0.25mmL Bevel

Legacy™2 and Legacy™4 Implant Design

3.7mmD Legacy™2 and Legacy™4

3.1mmD Apex Diameter

4.7mmD Legacy™2 and Legacy™4

4.1mmD Apex Diameter

Double-Lead Buttress Threads

1-72UNF Internal Thread

2.0mmL Zone Mini-threads

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

SBM TextureHA

4.2mmD Legacy™2 and Legacy™4

3.6mmD Apex Diameter

Double-Lead Buttress Threads

1-72UNF Internal Thread

2.0mmL Zone Mini-threads

Length + 0.25mm

SBM TextureHA

Taper starts

at 4.5mm

Taper starts at 4.5mm

Length + 0.25mm

Taper starts at 4.5mm

1-72UNF Internal Thread

HASBM

Texture

3.2mmD Legacy™2 and Legacy™4

2.3mmD Apex Diameter

Double-Lead Buttress Threads

1.6 UNM Internal Thread

2.0mmL Zone Mini-threads

3.0mmD Platform with aDouble Internal Hex

2.25mmD (upper) and 2.0mmD (lower)

Length + 0.25mm

Taper starts at 3.0mm

HA SBM Texture

0.25mmL Bevel

0.25mmL Bevel

5.2mmD Legacy™2 and Legacy™4

4.6mmD Apex Diameter

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

SBM Texture

HA

1-72UNF Internal Thread

Taper starts

at 3.0mm

3.2mmD Body

3.0mmD Platform

0.6mm Hex Depth

1.2mm Hex Depth

4.7mmD Body

5.2mmD Body

4.5mmD Platform with

a 2.5mmD Internal Hex

1.5mm Hex Depth

3.7mmD Body

4.2mmD Body

3.5mmD Platform

with a 2.5mmD Internal

Hex

1.5mm Hex Depth

4

3.2mmD Legacy™32.6mmD Apex Diameter

Double-Lead Buttress Threads

1.6 UNM Internal Thread

2.0mmL Zone Mini-threads

Legacy™2 and Legacy™4 Implant Design

3.0mmD Platform with aDouble Internal Hex

2.25mmD (upper) and 2.0mmD (lower)

Length + 0.25mm

Taper starts at 1.25mm

HA

3.2mmD Body

3.0mmD Platform

0.6mm Hex Depth

1.2mm Hex Depth

SBM Texture

0.25mmL Bevel

0.25mmL Bevel

5.7mmD Legacy™2 and Legacy™4

5.1mmD Apex Diameter

Double-Lead Buttress Threads

1-72UNF Internal Thread

2.0mmL Zone Mini-threads

Length + 0.25mm

5.7mmD Body

7.0mmD Body

1.5mm Hex Depth

HA

7.0mmD Legacy™2 and Legacy™45.1mmD Apex Diameter

Taper starts

at 4.3 mm

Taper starts at 4.5mm

SBM Texture SBM

Texture

Length + 0.25mm

5.7mmD Platform with a 3.0mmD

Internal Hex

2.0mmL Zone Mini-threads

1-72UNF Internal Thread

HA

Double-Lead Buttress Threads

Legacy™3 Implant Design

5

0.25mmL Bevel

0.25mmL Bevel

3.7mmD Legacy™33.1mmD Apex Diameter

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

3.7mmD Body

4.2mmD Body

3.5mmD Platform

with a 2.5mmD Internal

Hex

Length + 0.25mm

1.5mm Hex Depth

4.7mmD Body

5.2mmD Body

Legacy™3 Implant Design

4.5mmD Platform with

a 2.5mmD Internal Hex

5.2mmD Legacy™34.6mmD Apex Diameter

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

Length + 0.25mm

1.5mm Hex Depth

SBM Texture

SBM Texture

SBM Texture

Taper starts at 1.25mm

1-72UNF Internal Thread

HA

0.25mmL Bevel

4.2mmD Legacy™33.6mmD Apex Diameter

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

SBM Texture

Taper starts

at 1.25mm

1-72UNF Internal Thread

HA

HA

1-72UNF Internal Thread

0.25mmL Bevel

4.7mmD Legacy™34.1mmD Apex Diameter

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

1-72UNF Internal Thread

HA

5.7mmD Legacy™35.1mmD Apex Diameter

SBM Texture

Double-Lead Buttress Threads

2.0mmL Zone Mini-threads

Length + 0.25mm

1-72UNF Internal Thread

HA

Taper starts at 1.25mm

Taper starts at 1.25mm

Taper starts

at 1.25mm

0.25mmL Bevel5.7mmD Body

7.0mmD Body 1.5mm Hex Depth

7.0mmD Legacy™35.1mmD Apex Diameter

Taper starts

at 3.0mm

SBM Texture

Length + 0.25mm

5.7mmD Platform with

a 3.0mmD Internal Hex

2.0mmL Zone Mini-threads

1-72UNF Internal Thread

HA

Double-Lead Buttress Threads

6

Legacy™1: Features & Benefits

• Internalconnectionwith1.5mmlonghex&internalbevel• TaperedbodyallowsinsertionusingTaperedScrew-Vent® drills (except the 5.7mmD implant uses 4.8/5.4mmD Step Drill)• Surfaceoptions:SBM(SolubleBlastMedia)textured or HA-coated• Double-LeadV-Threadsfor2xfasterinsertion& quadruple-lead threads near top for increased thread engagement and reduced stress• 2.0mmextenderretainedbycoverscrewforuseasa healing collar for one stage surgery• Twoself-tappinggrooves,extendinghalfwayupimplant

Cover Screw

Placing Implant with Carrier

Suture soft tissue around extender

All-in-One Packaging

Carrier/Transfer

Color coded titanium carrier

Use indents on carrier to align implant hex

Attach cover screw and extender to implant

Extender

3.5mmD Platform

3.7mmD Implant

3.5mmD Platform

4.2mmD Implant

4.5mmD Platform

4.7mmD Implant

5.7mmD Implant

5.7mmDPlatform

7

SBM Code HA Code Diameter Length Platform805708 815708 5.7mmD 8.0mmL 5.7mmD805710 815710 5.7mmD 10.0mmL 5.7mmD805711 815711 5.7mmD 11.5mmL 5.7mmD805713 815713 5.7mmD 13.0mmL 5.7mmD805716 815716 5.7mmD 16.0mmL 5.7mmD

SBM Code HA Code Diameter Length Platform804708 814708 4.7mmD 8.0mmL 4.5mmD804710 814710 4.7mmD 10.0mmL 4.5mmD804711 814711 4.7mmD 11.5mmL 4.5mmD804713 814713 4.7mmD 13.0mmL 4.5mmD804716 814716 4.7mmD 16.0mmL 4.5mmD

SBM Code HA Code Diameter Length Platform803708 813708 3.7mmD 8.0mmL 3.5mmD803710 813710 3.7mmD 10.0mmL 3.5mmD803711 813711 3.7mmD 11.5mmL 3.5mmD803713 813713 3.7mmD 13.0mmL 3.5mmD803716 813716 3.7mmD 16.0mmL 3.5mmD

Legacy™1: Two-Piece Implant for Two-Stage Surgery

803708 803710 803713 803716803711813708 813710 813713 813716813711

SBM and HA Surface Implants Incl. Cover Screw, Extender & Carrier/Transfer

3.7mmD

4.7mmD

805708 805710 805713 805716805711815708 815710 815713 815716815711

5.7mmD

SBM Code HA Code Diameter Length Platform804208 814208 4.2mmD 8.0mmL 3.5mmD804210 814210 4.2mmD 10.0mmL 3.5mmD804211 814211 4.2mmD 11.5mmL 3.5mmD804213 814213 4.2mmD 13.0mmL 3.5mmD804216 814216 4.2mmD 16.0mmL 3.5mmD

804208 804210 804213 804216804211814208 814210 814213 814216814211

4.2mmD

804708 804710 804713 804716804711814708 814710 814713 814716814711

8

LegacyP: Features & Benefits

• Internalconnectionwith1.5mmlonghex&internallead-inbevel• Progressivelydeeperv-threadswhilethreadpitchremains constant at 0.6mm for increased primary stability• Threadlesscollarinthecrestalbonesection• Surface:Machinedsurfaceincrestalzone&SBM(SolubleBlast Media) surface in central and apical zone • Fixture-Mountwithroundedprofileandreducedledgefor easier insertion into impression• Fixture-Mountwithextendedabutmentsectionis1.0mmlonger than Legacy3 for patients with thicker soft tissue• Carrier/Transfercanbeusedasfinalabutment

All-in-One Packaging

Carrier/Transfer

8037P13

Cover Screw

3.5mmD Platform

3.7mmD Implant

4.2mmD Implant

3.5mmD Platform

3.0mmD Platform

3.2mmD Implant

5.7mmD Implant

5.7mmDPlatform

4.7mmD Implant

4.5mmD Platform

5.2mmD Implant

4.5mmD Platform

9

Code Diameter Length Platform8032P08 3.2mmD 8.0mmL 3.0mmD8032P10 3.2mmD 10.0mmL 3.0mmD8032P11 3.2mmD 11.5mmL 3.0mmD8032P13 3.2mmD 13.0mmL 3.0mmD8032P16 3.2mmD 16.0mmL 3.0mmD

3.2mmD

8032P08 8032P168032P138032P118032P10

Code Diameter Length Platform8037P06 3.7mmD 6.0mmL 3.5mmD8037P08 3.7mmD 8.0mmL 3.5mmD8037P10 3.7mmD 10.0mmL 3.5mmD8037P11 3.7mmD 11.5mmL 3.5mmD8037P13 3.7mmD 13.0mmL 3.5mmD8037P16 3.7mmD 16.0mmL 3.5mmD

3.7mmD

8037P108037P06 8037P08 8037P168037P138037P11

Code Diameter Length Platform8042P06 4.2mmD 6.0mmL 3.5mmD8042P08 4.2mmD 8.0mmL 3.5mmD8042P10 4.2mmD 10.0mmL 3.5mmD8042P11 4.2mmD 11.5mmL 3.5mmD8042P13 4.2mmD 13.0mmL 3.5mmD

4.2mmD

8042P108042P06 8042P08 8042P138042P11

Code Diameter Length Platform8047P06 4.7mmD 6.0mmL 4.5mmD8047P08 4.7mmD 8.0mmL 4.5mmD8047P10 4.7mmD 10.0mmL 4.5mmD8047P11 4.7mmD 11.5mmL 4.5mmD8047P13 4.7mmD 13.0mmL 4.5mmD

4.7mmD

8047P108047P06 8047P08 8047P138047P11

Code Diameter Length Platform8052P06 5.2mmD 6.0mmL 4.5mmD8052P08 5.2mmD 8.0mmL 4.5mmD8052P10 5.2mmD 10.0mmL 4.5mmD8052P11 5.2mmD 11.5mmL 4.5mmD8052P13 5.2mmD 13.0mmL 4.5mmD

5.2mmD

8052P108052P06 8052P08 8052P138052P11

Code Diameter Length Platform8057P06 5.7mmD 6.0mmL 5.7mmD8057P08 5.7mmD 8.0mmL 5.7mmD8057P10 5.7mmD 10.0mmL 5.7mmD8057P11 5.7mmD 11.5mmL 5.7mmD8057P13 5.7mmD 13.0mmL 5.7mmD

5.7mmD

8057P108057P06 8057P08 8057P138057P11

LegacyP: Two-Piece Implant for Two-Stage SurgeryDual Surface: SBM & Machined Incl. Cover Screw & Carrier/Transfer

10

3.5mmD Platform

3.7mmD Implant

5.7mmD Implant

5.7mmDPlatform

4.2mmD Implant

4.7mmD Implant

• Internalconnectionwith1.5mmlonghex&internallead-inbevel• Bodyisstraightfortop1/3rdwithbottom2/3rdstaperedforbone expansion. Surgically compatible with Tapered Screw-Vent® drills (except the 5.7mmD Implant uses 4.8/5.4mmD Step Drill)• Surfaceoptions:SBM(SolubleBlastMedia)texturedorHA-coated• Double-Leadbuttressthreadsforimprovedinsertionand quadruple-lead threads near top for increased thread engagement and reduced stress• 2.0mmextenderretainedbycoverscrewforuseasahealing collar for one stage surgery• Color-codedcarrierusableasaclosed-traytransferand temporary abutment • Threeaggressiveself-tappinggroovesextending2/3rdslength up the implant

3.5mmD Platform

4.5mmD Platform

7.0mmD Implant

5.7mmDPlatform

5.2mmD Implant

4.5mmD Platform

3.0mmD Platform

3.2mmD Implant

All-in-One Packaging

Carrier/Transfer

ExtenderCover Screw

Legacy™2: Features & Benefits

11

SBM Code HA Code Diameter Length Platform823208 833208 3.2mmD 8.0mmL 3.0mmD823210 833210 3.2mmD 10.0mmL 3.0mmD823211 833211 3.2mmD 11.5mmL 3.0mmD823213 833213 3.2mmD 13.0mmL 3.0mmD823216 833216 3.2mmD 16.0mmL 3.0mmD

SBM Code HA Code Diameter Length Platform825706 835706 5.7mmD 6.0mmL 5.7mmD825708 835708 5.7mmD 8.0mmL 5.7mmD825710 835710 5.7mmD 10.0mmL 5.7mmD825711 835711 5.7mmD 11.5mmL 5.7mmD825713 835713 5.7mmD 13.0mmL 5.7mmD825716 835716 5.7mmD 16.0mmL 5.7mmD

SBM Code HA Code Diameter Length Platform824206 834206 4.2mmD 6.0mmL 3.5mmD824208 834208 4.2mmD 8.0mmL 3.5mmD824210 834210 4.2mmD 10.0mmL 3.5mmD824211 834211 4.2mmD 11.5mmL 3.5mmD824213 834213 4.2mmD 13.0mmL 3.5mmD824216 834216 4.2mmD 16.0mmL 3.5mmD

SBM Code HA Code Diameter Length Platform824706 834706 4.7mmD 6.0mmL 4.5mmD824708 834708 4.7mmD 8.0mmL 4.5mmD824710 834710 4.7mmD 10.0mmL 4.5mmD824711 834711 4.7mmD 11.5mmL 4.5mmD824713 834713 4.7mmD 13.0mmL 4.5mmD824716 834716 4.7mmD 16.0mmL 4.5mmD

SBM Code HA Code Diameter Length Platform823706 833706 3.7mmD 6.0mmL 3.5mmD823708 833708 3.7mmD 8.0mmL 3.5mmD823710 833710 3.7mmD 10.0mmL 3.5mmD823711 833711 3.7mmD 11.5mmL 3.5mmD823713 833713 3.7mmD 13.0mmL 3.5mmD823716 833716 3.7mmD 16.0mmL 3.5mmD

825708 825710 825713 825716825711

Legacy™2: Two-Piece Implant for Two-Stage SurgerySBM and HA Surface Implants Incl. Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6.0mmL implant

824708 824710 824713 824716824711834708

824706834706 834710 834713 834716834711

835708825706835706 835710 835713 835716835711

SBM Code HA Code Diameter Length Platform827008 837008 7.0mmD 8.0mmL 5.7mmD827010 837010 7.0mmD 10.0mmL 5.7mmD827011 837011 7.0mmD 11.5mmL 5.7mmD827013 837013 7.0mmD 13.0mmL 5.7mmD 827008

837008827010837010

827013837013

827011837011

3.7mmD

824208 824210 824213 824216824211834208

824206834206 834210 834213 834216834211

4.2mmD

4.7mmD

5.7mmD

7.0mmD

SBM Code HA Code Diameter Length Platform825206 835206 5.2mmD 6.0mmL 4.5mmD825208 835208 5.2mmD 8.0mmL 4.5mmD825210 835210 5.2mmD 10.0mmL 4.5mmD825211 835211 5.2mmD 11.5mmL 4.5mmD825213 835213 5.2mmD 13.0mmL 4.5mmD825216 835216 5.2mmD 16.0mmL 4.5mmD

825208 825210 825213 825216825211835208 835210 835213 835216835211

5.2mmD

823208 823210 823213 823216823211

3.2mmD

833208 833210 833213 833216833211

823708833708

823706833706

823710833710

823713833713

823716833716

823711833711

825206835206

12

• Internalconnectionwith1.5mmlonghex&internal lead-in bevel• TaperedbodyallowsinsertionusingTaperedScrew-Vent® drills for 3.7mmD, 4.2mmD & 4.7mmD implants only • Surfaceoptions:SBM(SolubleBlastMedia)texturedor HA-coated• Double-Leadbuttressthreadsforimprovedinsertion& initial stability, quadruple-lead threads near top for increased thread engagement and reduced stress• 2.0mmextenderretainedbycoverscrewforuseasa healing collar or for one or two-stage surgery• Color-codedcarrierusableasaclosed-traytransfer and/or final full-contour abutment• Twoself-tappinggrooves,extendinghalfwayupimplant

3.0mmD Platform

3.2mmD Implant

4.7mmDImplant

4.5mmDPlatform

3.7mmD Implant

4.2mmD Implant

3.5mmD Platform

3.5mmD Platform

5.7mmDImplant

5.7mmDPlatform

5.2mmD Implant

4.5mmD Platform

Legacy™3: Features & Benefits

7.0mmDImplant

5.7mmDPlatform

Cover Screw

All-in-One Packaging

Carrier/Transfer

Extender

13

SBM Code HA Code Diameter Length Platform855706 865706 5.7mmD 6.0mmL 5.7mmD855708 865708 5.7mmD 8.0mmL 5.7mmD855710 865710 5.7mmD 10.0mmL 5.7mmD855711 865711 5.7mmD 11.5mmL 5.7mmD855713 865713 5.7mmD 13.0mmL 5.7mmD855716 865716 5.7mmD 16.0mmL 5.7mmD

855708 865708

855706 865706

855710 865710

855713 865713

855716 865716

855711 865711

SBM Code HA Code Diameter Length Platform854206 864206 4.2mmD 6.0mmL 3.5mmD854208 864208 4.2mmD 8.0mmL 3.5mmD854210 864210 4.2mmD 10.0mmL 3.5mmD854211 864211 4.2mmD 11.5mmL 3.5mmD854213 864213 4.2mmD 13.0mmL 3.5mmD854216 864216 4.2mmD 16.0mmL 3.5mmD

SBM Code HA Code Diameter Length Platform855206 865206 5.2mmD 6.0mmL 4.5mmD855208 865208 5.2mmD 8.0mmL 4.5mmD855210 865210 5.2mmD 10.0mmL 4.5mmD855211 865211 5.2mmD 11.5mmL 4.5mmD855213 865213 5.2mmD 13.0mmL 4.5mmD855216 865216 5.2mmD 16.0mmL 4.5mmD

SBM Code HA Code Diameter Length Platform854706 864706 4.7mmD 6.0mmL 4.5mmD854708 864708 4.7mmD 8.0mmL 4.5mmD854710 864710 4.7mmD 10.0mmL 4.5mmD854711 864711 4.7mmD 11.5mmL 4.5mmD854713 864713 4.7mmD 13.0mmL 4.5mmD854716 864716 4.7mmD 16.0mmL 4.5mmD

SBM Code HA Code Diameter Length Platform853706 863706 3.7mmD 6.0mmL 3.5mmD853708 863708 3.7mmD 8.0mmL 3.5mmD853710 863710 3.7mmD 10.0mmL 3.5mmD853711 863711 3.7mmD 11.5mmL 3.5mmD853713 863713 3.7mmD 13.0mmL 3.5mmD853716 863716 3.7mmD 16.0mmL 3.5mmD

SBM Code HA Code Diameter Length Platform853208 863208 3.2mmD 8.0mmL 3.0mmD853210 863210 3.2mmD 10.0mmL 3.0mmD853211 863211 3.2mmD 11.5mmL 3.0mmD853213 863213 3.2mmD 13.0mmL 3.0mmD853216 863216 3.2mmD 16.0mmL 3.0mmD

Legacy™3: Two-Piece Implant for Two-Stage Surgery

855208 865208

855206 865206

855210 865210

855213 865213

855216 865216

855211 865211

854708 864708

854706 864706

854710 864710

854713 864713

854716 864716

854711 864711

853706 863706

853708 863708

853710 863710

853713 863713

853716 863716

853711 863711

853208 863208

853210 863210

853213 863213

853216 863216

853211 863211

SBM and HA Surface Implants Incl. Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6.0mmL implant

SBM Code HA Code Diameter Length Platform857006 867006 7.0mmD 6.0mmL 5.7mmD857008 867008 7.0mmD 8.0mmL 5.7mmD857010 867010 7.0mmD 10.0mmL 5.7mmD857011 867011 7.0mmD 11.5mmL 5.7mmD857013 867013 7.0mmD 13.0mmL 5.7mmD

857008 867008

857006 867006

857010 867010

857013 867013

857011 867011

3.7mmD

854208 864208

854206 864206

854210 864210

854213 864213

854216 864216

854211 864211

4.2mmD

4.7mmD

5.7mmD

7.0mmD

5.2mmD

3.2mmD

14

Legacy™4: Features & Benefits

3.5mmD Platform

All-in-One Packaging

Carrier/Transfer

3.5mmDPlatform873713

13mmLength

Extender

3.7mmD Implant

5.7mmD Implant

5.7mmDPlatform

4.2mmD Implant

4.7mmD Implant

3.5mmD Platform

4.5mmD Platform

7.0mmD Implant

5.7mmDPlatform

Cover Screw

5.2mmD Implant

4.5mmD Platform

3.0mmD Platform

3.2mmD Implant

• Two-pieceFixture-Mount:Topincludestorque-safetyfeatureand detaches in impression for metal-to-metal transfer accuracy• Fixture-Mountmaybeshortenedatthelinetofunctionasafinal preparable abutment• 2.0mmextenderretainedbycoverscrewforuseasahealingcollar for one-stage surgery features a concave transgingival profile which matches the Fixture-Mount• Internalconnectionwith1.5mmlonghex&internallead-inbevel• Bodyisstraightfortop1/3rdwithbottom2/3rdstaperedforbone expansion. Surgically-compatible with Tapered Screw-Vent® drills (except the 5.7mmD implant uses 4.8/5.4mmD Step Drill)• Double-Leadbuttressthreadsforimprovedinsertionand quadruple-lead threads near top for increased thread engagement and reduced stress• Surfaceoptions:SBM(SolubleBlastMedia)texturedorHA-coated• Threeaggressiveself-tappinggroovesextend2/3rdslengthup the implant

15

SBM Code HA Code Diameter Length Platform873208 883208 3.2mmD 8.0mmL 3.0mmD873210 883210 3.2mmD 10.0mmL 3.0mmD873211 883211 3.2mmD 11.5mmL 3.0mmD873213 883213 3.2mmD 13.0mmL 3.0mmD873216 883216 3.2mmD 16.0mmL 3.0mmD

SBM Code HA Code Diameter Length Platform875706 885706 5.7mmD 6.0mmL 5.7mmD875708 885708 5.7mmD 8.0mmL 5.7mmD875710 885710 5.7mmD 10.0mmL 5.7mmD875711 885711 5.7mmD 11.5mmL 5.7mmD875713 885713 5.7mmD 13.0mmL 5.7mmD875716 885716 5.7mmD 16.0mmL 5.7mmD

SBM Code HA Code Diameter Length Platform874206 884206 4.2mmD 6.0mmL 3.5mmD874208 884208 4.2mmD 8.0mmL 3.5mmD874210 884210 4.2mmD 10.0mmL 3.5mmD874211 884211 4.2mmD 11.5mmL 3.5mmD874213 884213 4.2mmD 13.0mmL 3.5mmD874216 884216 4.2mmD 16.0mmL 3.5mmD

SBM Code HA Code Diameter Length Platform874706 884706 4.7mmD 6.0mmL 4.5mmD874708 884708 4.7mmD 8.0mmL 4.5mmD874710 884710 4.7mmD 10.0mmL 4.5mmD874711 884711 4.7mmD 11.5mmL 4.5mmD874713 884713 4.7mmD 13.0mmL 4.5mmD874716 884716 4.7mmD 16.0mmL 4.5mmD

SBM Code HA Code Diameter Length Platform873706 883706 3.7mmD 6.0mmL 3.5mmD873708 883708 3.7mmD 8.0mmL 3.5mmD873710 883710 3.7mmD 10.0mmL 3.5mmD873711 883711 3.7mmD 11.5mmL 3.5mmD873713 883713 3.7mmD 13.0mmL 3.5mmD873716 883716 3.7mmD 16.0mmL 3.5mmD

874208 874210 874213 874216874211

875708 875710 875713 875716875711

Legacy™4: Two-Piece Implant for Two-Stage SurgerySBM and HA Surface Implants Incl. Cover Screw, Extender & Carrier/Transfer Extender NOT supplied with 6.0mmL implant

874708 874710 874713 874716874711

884208874206884206 884210 884213 884216884211

884708874706884706 884710 884713 884716884711

885708875706885706 885710 885713 885716885711

SBM Code HA Code Diameter Length Platform877006 887006 7.0mmD 6.0mmL 5.7mmD877008 887008 7.0mmD 8.0mmL 5.7mmD877010 887010 7.0mmD 10.0mmL 5.7mmD877011 887011 7.0mmD 11.5mmL 5.7mmD877013 887013 7.0mmD 13.0mmL 5.7mmD

877008887008

877010887010

877013887013

877011887011

3.7mmD

4.2mmD

4.7mmD

5.7mmD

7.0mmD

SBM Code HA Code Diameter Length Platform875206 885206 5.2mmD 6.0mmL 4.5mmD875208 885208 5.2mmD 8.0mmL 4.5mmD875210 885210 5.2mmD 10.0mmL 4.5mmD875211 885211 5.2mmD 11.5mmL 4.5mmD875213 885213 5.2mmD 13.0mmL 4.5mmD875216 885216 5.2mmD 16.0mmL 4.5mmD

875208 875210 875213 875216875211885208 885210 885213 885216885211

5.2mmD

873208 873210 873213 873216873211

3.2mmD

883208 883210 883213 883216883211

873708883708

873706883706

873710883710

873713883713

873716883716

873711883711

875206885206

877006887006

16

Labeling

8037

13Legacy™

1 Im

plant

XXXX

X

(XX)XX

XXXX

XXXX

XXXX

(XX)XX

XXXX

(XX)XX

XXX

803713Legacy™1 Implant

SBM®

Use by dateXXXX-XX-XX

Do not re-useConsult instructions for use

Do not open if damaged

Size: 3.7mmD x 13mmL, Qty: 1

3.5mmD Platform

Made in USA

8037

13Legacy™

1 Im

plant

XXXX

X

Implants

1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Item quantity 6) Product dimensions 7) Use by date (XXXX-XX) 8) Tamper proof symbol 9) Refer to Instructions For Use (IFU) 10) Do not re-use symbol 11) Sterilized using gamma irradiation symbol 12) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 13) Country of origin 14) Unique Device Identification (UDI) barcode and text 15) Lot number (XXXXXX) 16) Implant prosthetic platform diameter (written and color-coded) 17) Implant diameter color reference on surgical tray 18) Non-sterile symbol

3

1

6

7

9

80 = Legacy1 SBM37 = 3.7mmD body diameter13 = 13.0mmL body length

8035

-47Legacy™

Abu

tment

XXXX

X

(XX)XX

XXXX

XXXX

XXXX

(XX)XX

XXXX

(XX)XX

XXX

8035-47

Legacy™ Plastic EngagingTemporary AbutmentIncludes: Fixation Screw [1000-06]

Do not re-use

Consult instructions for use

Do not open if damaged

Size: Platform: 3.5mm Qty: 1

Made in USA

8035

-47Legacy™

Abu

tment

XXXX

X

Prosthetics

8035-47

80 = Legacy prosthetics 35 = 3.5mmD platform diameter -47= prosthetic specific code

2

13

16

8

5

12

17

15

14

10

11

3

1

818

10

2

4

16

4

5

6

9

12 13

1615

14

17

The implant is mounted on a color-coded carrier/transfer. A cover screw and an extender are included in each vial.

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with insertion tool & drill or ratchet

Each cap label is color coded by platform diameter of implant

All the implants come in a sterile vial

Each vial label is color-coded with two tear-off labels

Prepare surgical site with double cutting step drill

Insert implant into osteotomy Index Fixture-Mount flat to labial

Remove the holder containing the cover screw & extender

Align the flat of the fixture mount to the labial

Unscrew the cover screw & extender

Remove Fixture-Mount

Attach the cover screw to implant

Suture soft tissue over cover screw

Attach the cover screw & extender to implant

Suture soft tissue around cover screw & extender

All-in-One Packaging

18

Selection Charts: Implants, Abutments and Components

8035-46

8035-31 8035-32

8035-31C8035-32C

8035-51 8035-52

3.5mmD Platform3.0mmD Platform

8530-01 8530-13 8530-15

8530-21 8530-22 8530-23

3037-26

8537-02 85378035-21 8035-22 8035-23

8035-40 8035-41 8035-44

8530-618530-62-15S8530-63-15S

8035-72

8530-31 8530-32

8530-31C8530-32C

8530-51 8530-52

8530-51-15C 8530-52-15C

8530-51-08C 8530-52-08C

8530-418530-40 8530-46 8530-47*8730-47

8530-49 8730-818730-82

8735-80N8735-818735-82

†8730-81NE†8730-82NE

8530-05 8530-08 8035-01 8035-13 8035-15

Fixture-Mount

*concave profile

Cover Screws, Healing Collars, Transfers and Implant Analogs

Straight Abutments, Comfort Caps, Transfers and Abutment Analogs

Temporary and Customizable Abutments

Ball, Multi-Unit and LOCATOR® Abutments

Straight, Angled Contoured and Lab Abutments

8530-63-30S8530-64-30S

8530-62 8530-64 8035-62-15S8035-63-15S 8035-64-15S

8035-63-30S8035-64-30S 8035-65-30S

8035-91-L8530-91-L 8530-92-L 8530-93-L 8530-94-L 8035-90-L8530-95-L

†non-engaging

8530-06D

19

4.5mmD Platform

Fixture-Mount

3047-26

3047-02 30478045-21 8045-22 8045-23

3057-26

3057-02 3057 3065-028057-21 8057-22 8057-23

3065-26

3065

8057-318057-32

8057-518057-52

HLA5-6HLA5-7

8045-31 8045-32

8045-31C8045-32C

8045-51 8045-52

8045-51-08C 8045-52-08C

8045-51-15C 8045-52-15C

HLA4-5 HLA4-6

8035-51-08C 8035-52-08C

8035-51-15C 8035-52-15C

HLA3-4 HLA3-5

8035-47*8735-47

8035-49 8045-40 8045-41 8045-44 8045-46 8045-47*8745-47

8045-49 8057-40 8057-44 8057-46 8057-49

8035-62 8035-64

8035-74

8045-61 8045-62 8045-64

8045-72 8045-74

8045-62-15S8045-63-15S8045-64-15S

8057-61 8057-62 8057-64

8057-72 8057-74

8035-05 8035-08 8045-01 8045-13 8045-15 8045-05 8045-08 8057-01 8057-13 8057-15 8057-05 8057-08

Fixture-Mount

8035-61

8057-47*8757-47

3.5mmD Platform

8745-80N8745-82

8745-82W

8757-80N8757-82

†8735-80NNE†8735-81NE†8735-82NE

†8745-80NNE†8745-82NE

†8745-82WNE

†8757-80NNE†8757-82NE

8045-63-30S8045-64-30S8045-65-30S

Fixture-Mount

8035-94-L 8035-95-L 8045-91-L 8045-93-L8045-92-L 8045-94-L 8045-95-L 8057-91-L 8057-93-L8057-92-L 8057-94-L 8057-95-L8035-92-L 8035-93-L 8045-90-L

5.7mmD Platform

8035-06D 8045-06D 8057-06D

20 *8035-01S, 8045-01S, 8057-01S for 6.0mmL implants only

8730-21 8730-22 8730-23

8730-08 8730- 08NE

8537 Analog for Snap-on

Abutment

8730-05

8530-01

8730-12 8730-13 8730-15

3.0mmD Platform

Transfers & Abutment Analogs

Healing Collars

Cover Screw & Implant Analogs

LOCATOR® Abutments

Straight Abutments

Selection Chart: Concave Prosthetics

Fixture-Mount

8730-17

8730Analog for Legacy™4

Fixture-Mount

8537-02 3037-26

8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L

†non-engaging

8530-06D

21

8735-21N 8735-22N 8735-23N

8735-12N 8735-13N 8735-15N

3.5mmD Platform

8735-08N8735-08NNE†

8735-05N 8735-088735-08NE†

8735-05 8747S Analog for short

Snap-on Abutment

8537 Analog for narrow

Snap-on Abutment

Legacy™4 Fixture-Mount

8735-17N

8735-21 8735-22 8735-23

8735-12 8735-13 8735-15

8537-023037-26

8747-023047-26

8735Analog for Legacy™4

Fixture-Mount

8035-01 8035-01S*

8035-90-L8035-91-L 8035-92-L8035-93-L8035-94-L8035-95-L

8035-06D

22 †non-engaging*6530-01S and 6534-01S for 6.0mmL implants only

4.5mmD Platform

Transfers & Abutment Analogs

Healing Collars

Cover Screws & Implant Analogs

LOCATOR® Abutments

Straight Abutments

Selection Chart: Concave Prosthetics

8745-21N 8745-22N 8745-23N

8745-12N 8745-13N 8745-15N

8745-08N8745-08NNE†

8745-05N 8745-088745-08NE†

8745-05 8757S Analog for short

Snap-on Abutment

3047

Legacy™4 Carrier/Transfer

8745-17N

8745-21 8745-22 8745-23

8745-12 8745-13 8745-15

8045-01 8045-01S*

3047-023047-26

8757-023057-26

8745Analog for Legacy™4

Fixture-Mount

8045-90-L8045-91-L 8045-92-L 8045-93-L8045-94-L8045-95-L

8045-06D

23

8757-21N 8757-22N 8757-23N

8757-12N 8757-13N 8757-15N

5.7mmD Platform

8757-08N8757-08NNE†

8757-05N 8757-088757-08NE†

8757-058765S

Analog for short Snap-on

Abutment

3057

Legacy™4 Carrier/Transfer

8757-17N

8757-21 8757-22 8757-23

8757-12 8757-13 8757-15

3057-023057-26

8765-023065-26

8757Analog for Legacy™4

Fixture-Mount

8057-01 8057-01S*

8057-91-L 8057-92-L 8057-93-L8057-94-L8057-95-L

8057-06D

24

Code Description1000-20S For 3.0mmD hexagon platform – Pack of 21000-20 For 3.0mmD hexagon platform – Pack of 21000-41 For 3.0mmD hexagon platform – Pack of 21000-26 For 3.0mmD hexagon platform – Pack of 2

1000-26XL For 3.0mmD hexagon platform – Pack of 21000-01S For 3.5, 4.5 & 5.7mmD hexagon platforms – Pack of 21000-01 For 3.5, 4.5 & 5.7mmD hexagon platforms – Pack of 21000-06 For 3.5, 4.5 & 5.7mmD hexagon platforms – Pack of 21000-10 For 3.5, 4.5 & 5.7mmD hexagon platforms – Pack of 2

1000-10XL For 3.5, 4.5 & 5.7mmD hexagon platforms – Pack of 2

Cover Screws, Healing Collars, Transfers and Analogs

Code Platform Replacement Screw 8530-05 3.0mmD 1000-41 8035-05 3.5mmD 1000-06 8045-05 4.5mmD 1000-06 8057-05 5.7mmD 1000-06

Code Platform8530-06D 3.0mmD8035-06D 3.5mmD8045-06D 4.5mmD8057-06D 5.7mmD

Titanium Implant Analogs

Code Code [*for 6.0mmL Only] Platform 8530-01 - 3.0mmD 8035-01 8035-01S 3.5mmD 8045-01 8045-01S 4.5mmD 8057-01 8057-01S 5.7mmD

Code Platform Replacement Screw 8530-08 3.0mmD 1000-26 8035-08 3.5mmD 1000-10 8045-08 4.5mmD 1000-10 8057-08 5.7mmD 1000-10

Open-Tray Implant Transfers Incl. Fixation Screw with 1.25mmD Hex

1000-10 8035-08 8045-08 8057-088530-081000-26

Closed-Tray Implant Transfers Incl. Fixation Screw with 1.25mmD Hex

1000-061000-41 8035-05 8045-05 8057-058530-05

Fixation Screws

Requires 1.25mmD Hex Tool Cover Screws

8035-01 *8035-01S

8530-01 8057-01 *8057-01S

8045-01 *8045-01S

Require 1.25mmD Hex Tool

1000-061000-01 1000-101000-26

Open-Tray Transfer &

Waxing Screw

1000-20

3.0mmD Hex Platform

1000-41

Closed-Tray Transfer & Temporary Abutment

Abutments

1000-01S1000-20S

Abutments

Closed-Tray Transfer & Temporary Abutment

Open-Tray Transfer &

Waxing Screw

1000-26XL

Waxing Screw

1000-10XL

Waxing Screw

Short Angled Multi-Unit

Abutments

Short Angled Multi-Unit

Abutments

8530-06D 8057-06D8045-06D8035-06D

New

25

Healing Collars: Concave Prosthetics

Code Platform Width Length 8730-12 3.0mmD 3.8mmD 2.0mmL 8730-13 3.0mmD 3.8mmD 3.0mmL 8730-15 3.0mmD 3.8mmD 5.0mmL 8730-17 3.0mmD 3.8mmD 7.0mmL 8735-12 3.5mmD 4.8mmD 2.0mmL 8735-13 3.5mmD 4.8mmD 3.0mmL 8735-15 3.5mmD 4.8mmD 5.0mmL 8745-12 4.5mmD 5.8mmD 2.0mmL 8745-13 4.5mmD 5.8mmD 3.0mmL 8745-15 4.5mmD 5.8mmD 5.0mmL 8757-12 5.7mmD 6.6mmD 2.0mmL 8757-13 5.7mmD 6.6mmD 3.0mmL 8757-15 5.7mmD 6.6mmD 5.0mmL

8730-12 8735-12 8745-12 8757-12

8730-13 8735-13 8745-13 8757-13

Require 1.25mmD Hex Tool Healing Collars, Concave Profile

8730-15 8735-15 8745-15 8757-15

8730-17

Code Platform Width Length 8735-12N 3.5mmD 3.8mmD 2.0mmL 8735-13N 3.5mmD 3.8mmD 3.0mmL 8735-15N 3.5mmD 3.8mmD 5.0mmL 8735-17N 3.5mmD 3.8mmD 7.0mmL 8745-12N 4.5mmD 4.8mmD 2.0mmL 8745-13N 4.5mmD 4.8mmD 3.0mmL 8745-15N 4.5mmD 4.8mmD 5.0mmL 8745-17N 4.5mmD 4.8mmD 7.0mmL

8745-12W 4.5mmD 6.3mmD 2.0mmL8745-13W 4.5mmD 6.3mmD 3.0mmL8745-15W 4.5mmD 6.3mmD 5.0mmL

8757-12N 5.7mmD 5.8mmD 2.0mmL 8757-13N 5.7mmD 5.8mmD 3.0mmL 8757-15N 5.7mmD 5.8mmD 5.0mmL 8757-17N 5.7mmD 5.8mmD 7.0mmL

Require 1.25mmD Hex Tool Narrow Healing Collars, Concave Profile

Code Platform Width Length 8530-13 3.0mmD 3.8mmD 3.0mmL 8530-15 3.0mmD 3.8mmD 5.0mmL 8035-13 3.5mmD 4.8mmD 3.0mmL 8035-15 3.5mmD 4.8mmD 5.0mmL 8045-13 4.5mmD 5.8mmD 3.0mmL 8045-15 4.5mmD 5.8mmD 5.0mmL 8057-13 5.7mmD 6.6mmD 3.0mmL 8057-15 5.7mmD 6.6mmD 5.0mmL

8530-13 8035-13 8045-13 8057-13

8530-15 8035-15 8045-15 8057-15

Require 1.25mmD Hex Tool Healing Collars

8735-12N

8745-12N

8757-12N

8745-13N

8757-13N

8745-15N

8757-15N

8735-17N

8745-17N

8757-17N

8745-13W8745-12W 8745-15W

8735-13N 8735-15N

NewNewNew

26

Narrow Closed-Tray Implant Transfers, Concave Profile

Incl. Fixation Screw with 1.25mmD Hex

Transfers: Concave Prosthetics

Code Platform Replacement Screw 8730-05 3.0mmD 1000-41 8735-05 3.5mmD 1000-06 8745-05 4.5mmD 1000-06 8757-05 5.7mmD 1000-06

Closed-Tray Implant Transfers, Concave Profile

1000-06 8735-05 8745-05 8757-058730-05

Code Platform Replacement Screw8730-08 3.0mmD 1000-268735-08 3.5mmD 1000-108745-08 4.5mmD 1000-108757-08 5.7mmD 1000-10

Open-Tray Implant Transfers, Concave Profile Incl. Fixation Screw with 1.25mmD Hex

1000-10 8735-08 8745-08 8757-088730-08

Code Platform Replacement Screw8735-08N 3.5mmD 1000-108745-08N 4.5mmD 1000-108757-08N 5.7mmD 1000-10

Narrow Open-Tray Implant Transfers,Concave Profile

Incl. Fixation Screw with 1.25mmD Hex

1000-10 8735-08N 8745-08N 8757-08N

Code Platform Replacement Screw8730-08NE 3.0mmD 1000-268735-08NE 3.5mmD 1000-108745-08NE 4.5mmD 1000-108757-08NE 5.7mmD 1000-10

Non-Engaging Open-Tray Implant Transfers,Concave Profile

Incl. Fixation Screw with 1.25mmD Hex

1000-10 8735-08NE 8745-08NE 8757-08NE

Code Platform Replacement Screw8735-08NNE 3.5mmD 1000-108745-08NNE 4.5mmD 1000-108757-08NNE 5.7mmD 1000-10

Narrow Non-Engaging Open-Tray Implant Transfers, Concave Profile

Incl. Fixation Screw with 1.25mmD Hex

1000-10 8735-08NNE 8745-08NNE 8757-08NNE

Code Platform Replacement Screw 8735-05N 3.5mmD 1000-06 8745-05N 4.5mmD 1000-06 8757-05N 5.7mmD 1000-06

1000-06 8735-05N 8745-05N 8757-05N

1000-26

Incl. Fixation Screw with 1.25mmD Hex

1000-41

8730-08NE1000-26

27

Code Platform Abutment Height Collar Heights Use Analog 8730-21 3.0mmD 5.5mm 1.0mm 8537 8730-22 3.0mmD 5.5mm 2.0mm 8537 8730-23 3.0mmD 5.5mm 3.0mm 8537 8735-21 3.5mmD 4.0mm 1.0mm 8747S 8735-21N 3.5mmD 5.5mm 1.0mm 8537 8735-22 3.5mmD 4.0mm 2.0mm 8747S 8735-22N 3.5mmD 5.5mm 2.0mm 8537 8735-23 3.5mmD 4.0mm 3.0mm 8747S 8735-23N 3.5mmD 5.5mm 3.0mm 8537 8745-21 4.5mmD 4.0mm 1.0mm 8757S 8745-21N 4.5mmD 5.5mm 1.0mm 3047 8745-22 4.5mmD 4.0mm 2.0mm 8757S 8745-22N 4.5mmD 5.5mm 2.0mm 3047 8745-23 4.5mmD 4.0mm 3.0mm 8757S 8745-23N 4.5mmD 5.5mm 3.0mm 3047 8757-21 5.7mmD 4.0mm 1.0mm 8765S 8757-21N 5.7mmD 5.5mm 1.0mm 3057 8757-22 5.7mmD 4.0mm 2.0mm 8765S 8757-22N 5.7mmD 5.5mm 2.0mm 3057 8757-23 5.7mmD 4.0mm 3.0mm 8765S 8757-23N 5.7mmD 5.5mm 3.0mm 3057

25

SMART PACKS, Transfers and Lab Analogs: Concave Profile

8730-23 8735-22 8745-22 8757-22

8730-22 8735-21N 8745-21N 8757-21N

8730-21 8735-21 8745-21 8757-21

8735-23N 8745-23N 8757-23N

8735-23 8745-23 8757-23

8735-22N 8745-22N 8757-22N

simplycrown&bridge SMART PACKSIncl. straight Snap-on Abutment with concave profile, Transfer, Analog, Castable Coping, Comfort Cap, Fixation Screw with 1.25mmD Hex

Analogs for Straight Snap-on Abutments, Short

8747S 8757S 8765S

Code Abutment Width8747S 4.7mmD8757S 5.7mmD8765S 6.5mmD

For use with 4.0mm (height) Straight Abutments

Code Abutment Width8747-02 4.7mmD Pack of 28757-02 5.7mmD Pack of 28765-02 6.5mmD Pack of 2 8757-02 8765-028747-02

For use with 4.0mm (height) Straight Abutments

3047 3057 30658537

Incl. Castable Coping

Code Abutment Width8537 3.7mmD3047 4.7mmD3057 5.7mmD3065 6.5mmD

Code Abutment Width8537-02 3.7mmD Pack of 23047-02 4.7mmD Pack of 23057-02 5.7mmD Pack of 23065-02 6.5mmD Pack of 2

3047-02 3057-02 3065-028537-02

Transfers for Straight Snap-on Abutments

Transfers for Straight Snap-on Abutments, Short

Analogs for Straight Snap-on Abutments

28

Code Platform Abutment Width8730 3.0mmD 3.7mmD8735 3.5mmD 4.7mmD8745 4.5mmD 5.7mmD8757 5.7mmD 6.5mmD

Code Platform Collar Heights Use Analog 8530-21 3.0mmD 1.0mm 8537 8530-22 3.0mmD 2.0mm 8537 8530-23 3.0mmD 3.0mm 8537 8035-21 3.5mmD 1.0mm 3047 8035-22 3.5mmD 2.0mm 3047 8035-23 3.5mmD 3.0mm 3047 8045-21 4.5mmD 1.0mm 3057 8045-22 4.5mmD 2.0mm 3057 8045-23 4.5mmD 3.0mm 3057 8057-21 5.7mmD 1.0mm 3065 8057-22 5.7mmD 2.0mm 3065 8057-23 5.7mmD 3.0mm 3065

Snap-on Abutments, Transfers and Lab Analogs

Code Abutment Width3037-26 3.7mmD Pack of 23047-26 4.7mmD Pack of 23057-26 5.7mmD Pack of 23065-26 6.5mmD Pack of 2

Code Abutment Width8537-02 3.7mmD Pack of 23047-02 4.7mmD Pack of 23057-02 5.7mmD Pack of 23065-02 6.5mmD Pack of 2

3047-26 3057-26 3065-263037-26

3047-02 3057-02 3065-028537-02

Code Abutment Width3037-28 3.7mmD Pack of 23047-28 4.7mmD Pack of 23057-28 5.7mmD Pack of 23065-28 6.5mmD Pack of 2

3047-28 3057-28 3065-283037-28

3047 3057 30658537

Incl. Castable Coping

Incl. Transfer, Comfort Cap & Fixation Screw with 1.25mmD Hex

8530-23 8035-23 8045-23 8057-23

8530-22 8035-22 8045-22 8057-22

8530-21 8035-21 8045-21 8057-21

Code Abutment Width8537 3.7mmD3047 4.7mmD3057 5.7mmD3065 6.5mmD

8735 8745 87578730

Straight Snap-on Abutments

Transfers for Straight Snap-on Abutments

Comfort Caps for Straight Snap-on Abutments

Analogs for Straight Snap-on Abutments

Analogs for Straight Snap-on Abutments – Legacy™4

Castable Copings for Straight Snap-on Abutments

29

Code Platform Angulation Collar Heights Replacement Screw8045-31C 4.5mmD 0° 1.0mm 1000-018045-32C 4.5mmD 0° 2.0mm 1000-01

8045-51-08C 4.5mmD 8° 1.0mm 1000-018045-52-08C 4.5mmD 8° 2.0mm 1000-018045-51-15C 4.5mmD 15° 1.0mm 1000-018045-52-15C 4.5mmD 15° 2.0mm 1000-01

Code Platform Angulation Collar Heights Replacement Screw8530-31C 3.0mmD 0° 1.0mm 1000-208530-32C 3.0mmD 0° 2.0mm 1000-20

8530-51-08C 3.0mmD 8° 1.0mm 1000-208530-52-08C 3.0mmD 8° 2.0mm 1000-208530-51-15C 3.0mmD 15° 1.0mm 1000-208530-52-15C 3.0mmD 15° 2.0mm 1000-20

Code Platform Angulation Collar Heights Replacement Screw8035-31C 3.5mmD 0° 1.0mm 1000-018035-32C 3.5mmD 0° 2.0mm 1000-01

8035-51-08C 3.5mmD 8° 1.0mm 1000-018035-52-08C 3.5mmD 8° 2.0mm 1000-018035-51-15C 3.5mmD 15° 1.0mm 1000-018035-52-15C 3.5mmD 15° 2.0mm 1000-01

Incl. Fixation Screw with 1.25mmD Hex

Code Platform Collar Heights Replacement Screw8530-31 3.0mmD 1.0mm 1000-208530-32 3.0mmD 2.0mm 1000-208035-31 3.5mmD 1.0mm 1000-018035-32 3.5mmD 2.0mm 1000-018045-31 4.5mmD 1.0mm 1000-018045-32 4.5mmD 2.0mm 1000-018057-31 5.7mmD 1.0mm 1000-018057-32 5.7mmD 2.0mm 1000-01

Straight Titanium Contoured Abutments

Contoured Titanium and Zirconia Abutments

8035-31 8045-31 8057-318530-31

8035-32 8045-32 8057-328530-32

Incl. Fixation Screw with 1.25mmD Hex

Code Platform Angulation Collar Heights Replacement Screw8530-51 3.0mmD 15° 0.75mm 1000-208530-52 3.0mmD 15° 2.0mm 1000-208035-51 3.5mmD 15° 0.75mm 1000-018035-52 3.5mmD 15° 2.0mm 1000-018045-51 4.5mmD 15° 0.75mm 1000-018045-52 4.5mmD 15° 2.0mm 1000-018057-51 5.7mmD 15° 0.75mm 1000-018057-52 5.7mmD 15° 2.0mm 1000-01

Angled Titanium Contoured Abutments

8035-51 8045-51 8057-518530-51

8035-52 8045-52 8057-528530-52

Incl. Fixation Screw with 1.25mmD HexZirconia Contoured Abutments

8530-32C

8035-31C

8045-31C

8530-31C

8035-32C

8530-52-15C

8035-51-15C

8045-51-15C

8045-52-15C

8530-51-15C

8035-52-15C

8045-32C

8530-52-08C

8045-51-08C

8045-52-08C

8530-51-08C

8035-52-08C

8035-51-08C

30

Code Platform Collar Heights Replacement ScrewHLA3-4 3.5mmD - 1000-01HLA3-5 3.5mmD - 1000-01HLA4-5 4.5mmD - 1000-01HLA4-6 4.5mmD - 1000-01HLA5-6 5.7mmD - 1000-01HLA5-7 5.7mmD - 1000-01

Laboratory Abutments Incl. Fixation Screw with 1.25mmD Hex

HLA3-5 HLA4-6

HLA3-4 HLA4-5

HLA5-7

HLA5-6

Laboratory, Gold, Plastic and Titanium Abutments

Code Platform Collar Heights Replacement Screw8530-40 3.0mmD 1.0mm 1000-208035-40 3.5mmD 1.0mm 1000-018045-40 4.5mmD 1.0mm 1000-018057-40 5.7mmD 1.0mm 1000-01

Incl. Fixation Screw with 1.25mmD HexGold Engaging Cast-to Abutments

8530-40 8035-40 8045-40 8057-40

Code Platform Collar Heights Replacement Screw8530-46 3.0mmD - 1000-208035-46 3.5mmD - 1000-018045-46 4.5mmD - 1000-018057-46 5.7mmD - 1000-01

Incl. Fixation Screw with 1.25mmD HexPlastic Non-Engaging Castable Abutments

8035-46 8045-46 8057-46

Code Platform Collar Heights Replacement Screw8530-49 3.0mmD 1.0mm 1000-208035-49 3.5mmD 1.0mm 1000-018045-49 4.5mmD 1.0mm 1000-018057-49 5.7mmD 1.0mm 1000-01

Incl. Fixation Screw with 1.25mmD HexTitanium Non-Engaging Temporary Abutments

Code Platform Collar Heights Replacement Screw8530-47 3.0mmD 1.0mm 1000-418035-47 3.5mmD 1.0mm 1000-068045-47 4.5mmD 1.0mm 1000-068057-47 5.7mmD 1.0mm 1000-06

Incl. Fixation Screw with 1.25mmD HexPlastic Engaging Temporary Abutments

8530-47 8035-47 8045-47 8057-47

Code Platform Collar Heights Replacement Screw8730-47 3.0mmD 2.0mm 1000-418735-47 3.5mmD 2.0mm 1000-068745-47 4.5mmD 2.0mm 1000-068757-47 5.7mmD 2.0mm 1000-06

Plastic Engaging Temporary Abutments, Concave Profile

8730-47 8735-47 8745-47 8757-47

Code Platform Collar Heights Replacement Screw8035-44 3.5mmD - 1000-018045-44 4.5mmD - 1000-018057-44 5.7mmD - 1000-01

Incl. Fixation Screw with 1.25mmD HexPlastic Engaging Castable Abutments

8035-44 8045-44 8057-44

Code Platform Collar Heights Replacement Screw8530-41 3.0mmD 1.0mm 1000-208035-41 3.5mmD 1.0mm 1000-018045-41 4.5mmD 1.0mm 1000-01

Incl. Fixation Screw with 1.25mmD HexGold Non-Engaging Cast-to Abutments

8530-41 8035-41 8045-41

Incl. Fixation Screw with 1.25mmD Hex

8530-49 8035-49 8045-49 8057-49

8530-46

31

Code Platform Collar Heights Width Replacement Screw8730-81 3.0mmD 1.0mm 3.8mmD 1000-20B8730-82 3.0mmD 2.0mm 3.8mmD 1000-20B

8735-80N 3.5mmD 0.0mm 3.8mmD 1000-24B8735-81 3.5mmD 1.0mm 4.7mmD 1000-24B8735-82 3.5mmD 2.0mm 4.7mmD 1000-01B

8745-80N 4.5mmD 0.0mm 4.7mmD 1000-24B 8745-82 4.5mmD 2.0mm 5.7mmD 1000-01B

8745-82W 4.5mmD 2.0mm 6.3mmD 1000-01B8757-80N 5.7mmD 0.0mm 5.7mmD 1000-24B 8757-82 5.7mmD 2.0mm 6.3mmD 1000-01B

Engaging Dual Hue Titanium Base Incl. Fixation Screw and Coping

Incl. Fixation Screw and Coping

Laboratory, Gold, Plastic and Titanium Abutments SMARTbase CAD/CAM

8730-82

8745-82

8735-80N

8745-82W

8735-81

8757-80N

8735-82

8757-82

8730-81

8745-80N

Code Platform Collar Heights Width Replacement Screw8730-81NE 3.0mmD 1.0mm 3.8mmD 1000-20B8730-82NE 3.0mmD 2.0mm 3.8mmD 1000-20B

8735-80NNE 3.5mmD 0.0mm 3.8mmD 1000-24B8735-81NE 3.5mmD 1.0mm 4.7mmD 1000-24B8735-82NE 3.5mmD 2.0mm 4.7mmD 1000-01B

8745-80NNE 4.5mmD 0.0mm 4.7mmD 1000-24B 8745-82NE 4.5mmD 2.0mm 5.7mmD 1000-01B

8745-82WNE 4.5mmD 2.0mm 6.3mmD 1000-01B8757-80NNE 5.7mmD 0.0mm 5.7mmD 1000-24B 8757-82NE 5.7mmD 2.0mm 6.3mmD 1000-01B

Non-Engaging Dual Hue Titanium Base

Tri-Grip™ Fixation Screws

Plastic Sleeve Burn-Out Copings

Code Platform Length1000-20B 3.0mmD 6.9mm1000-24B 3.5, 4.5, 5.7mmD 6.35mm1000-01B 3.5, 4.5, 5.7mmD 7.7mm

Code Width Length1000-38-28B 3.8mmD 9.0mm Pack of 21000-47-28B 4.7mmD 9.0mm Pack of 21000-57-28B 5.7mmD 9.0mm Pack of 21000-63-28B 6.3mmD 9.0mm Pack of 2

1000-01B1000-20B 1000-24B

1000-38-28B 1000-47-28B 1000-57-28B 1000-63-28B

8730-82NE

8745-82NE

8735-80NNE

8745-82WNE

8735-81NE

8757-80NNE

8735-82NE

8757-82NE

8730-81NE

8745-80NNE

Digital & Conventional Use

Digital & Conventional Use

New

32

Scan Adapters, LOCATOR® Abutments and Components

Code Platform Collar Heights Replacement Screw8530-09P 3.0mmD - 1000-208035-09P 3.5mmD - 1000-018045-09P 4.5mmD - 1000-018057-09P 5.7mmD - 1000-01

Incl. Fixation Screw {For use with Implant Direct Design Library}

Incl. Tri-Grip™ Fixation Screw {For use with Implant Direct Design Library}

* Multi-Use acceptable when used in laboratory only.

8530-09P 8035-09P 8045-09P 8057-09P

Platform 0.0mmL 1.0mmL 2.0mmL 3.0mmL 4.0mmL 5.0mmL3.0mmD - 8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L3.5mmD 8035-90-L 8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L4.5mmD 8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L5.7mmD - 8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L

LOCATOR® Abutments Require LOCATOR® Core Tool

8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L

8035-90-L 8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L

8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L

8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L

Retention Description Pack of 4 Pack of 20- Processing Spacer 1000-100-L4 1000-100-L20

Retention Description Pack of 4 Pack of 200.68 kg Male Blue (up to 20°) 1000-92B-L4 1000-92B-L201.36 kg Male Pink (up to 20°) 1000-92P-L4 1000-92P-L202.27 kg Male Clear (up to 20°) 1000-92C-L4 1000-92C-L200.00 kg Male Gray (up to 40°) 1000-92Z-L4 1000-92Z-L20

0.23-0.68 kg Male Red (up to 40°) 1000-92R-L4 1000-92R-L200.91 kg Male Orange (up to 40°) 1000-92E-L4 1000-92E-L20

1.36-1.82 kg Male Green (up to 40°) 1000-92G-L4 1000-92G-L20- Processing Male Black 1000-93-L4 1000-93-L20

Retention Description Pack of 4 Pack of 10- Metal Cap + Processing Male Black 1000-91-L4 1000-91-L10

Retention Description Pack of 1 Pack of 2 Pack of 10Assorted Male Processing Package (up to 20°) 1000-98SI-L1 1000-98SI-L2 1000-98SI-L10Assorted Male Processing Package (up to 40°) 1000-98S-L2 1000-98S-L10

1000-92B-L4 1000-92B-L20

1000-92P-L4 1000-92P-L20

1000-98S-L2 1000-98S-L10

1000-92Z-L4 1000-92Z-L20

1000-98SI-L11000-98SI-L2

1000-98SI-L10

1000-92E-L4 1000-92E-L20

1000-92G-L4 1000-92G-L20

1000-92C-L4 1000-92C-L20

1000-92R-L4 1000-92R-L20

1000-91-L4 1000-91-L10

1000-93-L4 1000-93-L20

1000-100-L4 1000-100-L20

PEEK Scan Adapters, Single-Use

Code Platform Collar Heights Replacement Screw8730-09PT 3.0mmD - 1000-20B8735-09PT 3.5mmD - 1000-01B8745-09PT 4.5mmD - 1000-01B8757-09PT 5.7mmD - 1000-01B

8735-09PT 8745-09PT 8757-09PT8730-09PT

Coming soon - please ask for availabilityPEEK/Titanium Scan Adapters, Single-Use*

Components for LOCATOR® Abutments

33

3.0mmD Platform

3.5mmD Platform

4.5mmD Platform

5.7mmD Platform

Selection Chart: Overdenture and Screw-Retained Restorations

Components for Multi-Unit Abutments

Abutments are compatible with Zimmer Biomet-Dental (Tapered Screw-Vent), BioHorizons® (internal) and MIS Implants with 3.5mmD, 4.5mmD and 5.7mmD prosthetic platforms

8530-61 8530-62 8530-64

8057-61 8057-62 8057-64

8035-61 8035-62 8035-64

Multi-Unit Abutments (*Includes Transfer & Comfort Cap)

8045-61 8045-62 8045-64

8035-72 8035-74

8045-72 8045-74

8057-72 8057-74

Components for LOCATOR® Abutments

Components for Ball Abutments

Ball Abutments (**Incl. Transfer & Comfort Cap)

LOCATOR® Abutments

8530-62-15S 8530-63-15S

8530-63-30S 8530-64-30S

8035-62-15S 8035-63-15S 8035-64-15S

8035-63-30S 8035-64-30S 8035-65-30S

8045-62-15S 8045-63-15S 8045-64-15S

8045-63-30S 8045-64-30S 8045-65-30S

8035-90-L8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L

8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L

8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L

8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L

1000-95-L4 1000-95-L20

1000-98S-L2 1000-98S-L10

1000-96-L4500-26

1000-98SI-L1 1000-98SI-L2

1000-98SI-L10

1000-91-L4 1000-91-L10

1000-92C-L4 1000-92C-L20

1000-92E-L4 1000-92E-L20

1000-93-L4 1000-93-L20

1000-92R-L4 1000-92R-L20

1000-92G-L4 1000-92G-L20

1000-92B-L4 1000-92B-L20

1000-92P-L4 1000-92P-L20

1000-92Z-L4 1000-92Z-L20

1000-94-L4 1000-94-L20

1000-100-L4 1000-100-L201000-97-L4

**1000-84Transfer

**1000-87Comfort Cap

1000-85Analog

1000-81Ball Abutment Housing

1000-82Nylon Liner

1000-88 1000-83 1000-86ToolsBall Abutment Housing &

Nylon LinerNylon Liner Transfer

*1000-68*4000-13Open-Tray Transfer3D Analog TransferComfort Cap Closed-Tray Transfer

Gold Coping Titanium Coping Plastic Coping Gold/Plastic Coping SMARTbase Cylinder SMARTbase Cylinder

1000-06D 1000-62 1000-63

1000-64 1000-65 1000-66 1000-67 1000-69BP 1000-69BGPEEK Scan Adapter

1000-09P

34

Ball Abutments

Platform 2.0mmL 4.0mmL3.5mmD 8035-72 8035-744.5mmD 8045-72 8045-745.7mmD 8057-72 8057-74

Platform Collar Height 15° Angulation 30° Angulation3.0mmD 2.5mm 8530-62-15S -3.0mmD 3.5mm 8530-63-15S 8530-63-30S3.0mmD 4.5mm - 8530-64-30S3.5mmD 2.0mm 8035-62-15S -3.5mmD 3.0mm 8035-63-15S 8035-63-30S3.5mmD 4.0mm 8035-64-15S 8035-64-30S3.5mmD 5.0mm - 8035-65-30S4.5mmD 2.0mm 8045-62-15S -4.5mmD 3.0mm 8045-63-15S 8045-63-30S4.5mmD 4.0mm 8045-64-15S 8045-64-30S4.5mmD 5.0mm - 8045-65-30S

Angled Multi-Unit Abutments, Short Incl. Transfer & Comfort Cap – require 1.25mmD Hex Tool

8035-72 8035-74

8045-72 8045-74

8057-72 8057-74

Platform 1.0mmL 2.0mmL 4.0mmL3.0mmD 8530-61 8530-62 8530-643.5mmD 8035-61 8035-62 8035-644.5mmD 8045-61 8045-62 8045-645.7mmD 8057-61 8057-62 8057-64

Incl. Transfer & Comfort Cap – require 1.25mmD Hex Tool

8035-61 8035-62 8035-64

8045-61 8045-62 8045-64

8057-61 8057-62 8057-64

8530-61 8530-62 8530-64

8530-62-15S8530-63-15S

Code Description1000-70S Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool]

Incl. Transfer & Comfort Cap

1000-70S

8035-62-15S8035-63-15S8035-64-15S

8045-62-15S8045-63-15S8045-64-15S

8530-63-30S8530-64-30S

8035-63-30S8035-64-30S8035-65-30S

8045-63-30S8045-64-30S8045-65-30S

Code Collar Heights Platform Angulation8530-62K 2.0mm 3.0mmD 0°8530-64K 4.0mm 3.0mmD 0°

8530-62-15SK 2.5mm 3.0mmD 15°8530-63-15SK 3.5mm 3.0mmD 15°8530-63-30SK 3.5mm 3.0mmD 30°

8035-61K 1.0mm 3.5mmD 0°8035-62K 2.0mm 3.5mmD 0°

8035-62-15SK 2.0mm 3.5mmD 15°8035-64-15SK 4.0mm 3.5mmD 15°8035-63-30SK 3.0mm 3.5mmD 30°8035-64-30SK 4.0mm 3.5mmD 30°

8045-61K 1.0mm 4.5mmD 0°8045-62K 2.0mm 4.5mmD 0°

8045-62-15SK 2.0mm 4.5mmD 15°8045-64-15SK 4.0mm 4.5mmD 15°8045-63-30SK 3.0mm 4.5mmD 30°8045-64-30SK 4.0mm 4.5mmD 30°

8057-61K 1.0mm 5.7mmD 0°8057-62K 2.0mm 5.7mmD 0°

Choose the convenience of a SMART PACK or select individual components

simplyfixed SMART PACKS Incl. Multi-Unit Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw

SMART PACKS, Multi-Unit and Ball Abutments

Multi-Unit Abutments

Incl. Transfer & Comfort Cap – require 1.25mmD Hex Tool

Replacement Top for Angled Abutments

35

Code Prosthetic Platform Description1000-64 5.0mmD Gold Coping1000-65 5.0mmD Titanium Coping1000-66 5.0mmD Plastic Coping1000-67 5.0mmD Gold & Plastic Coping

1000-09P - PEEK Scan Adapter 1000-69BP - SMARTbase Cylinder Pink 1000-69BG - SMARTbase Cylinder Gold

1000-05 - Coping Fixation Screw – Pack of 21000-25B - Tri-Grip Fixation Screw for SMARTbase Cylinder

Code Prosthetic Platform Description1000-06D 5.0mmD 3D Analog1000-62 5.0mmD Open-Tray Transfer incl. Fixation Screw1000-63 5.0mmD Closed-Tray Transfer incl. Fixation Screw1000-68 5.0mmD Plastic Abutment Transfer – Pack of 24000-13 5.0mmD Plastic Comfort Cap – Pack of 21000-14 - Open-Tray Fixation Screw, Long – Pack of 21000-15 - Closed-Tray Fixation Screw, Short – Pack of 2

Code Description1000-81 Housing – Pack of 21000-82 Nylon Liner – Pack of 21000-83 Nylon Liner Transfer – Pack of 21000-84 Transfer – Pack of 21000-85 Analog1000-86 Tools1000-87 Comfort Cap – Pack of 21000-88 Housing & Nylon Liner

1000-82

1000-84

1000-86 1000-881000-87

1000-83

1000-85

1000-81

Components for Overdenture and Screw-Retained Restorations

Components for LOCATOR® Abutments

Code Description 1000-94-L4 Impression Coping – Pack of 4 1000-94-L20 Impression Coping – Pack of 20 1000-95-L4 Abutment Analog 4.0mmD – Pack of 4 1000-95-L20 Abutment Analog 4.0mmD – Pack of 20 1000-97-L4 Abutment Parallel Post – Pack of 4 4500-26 Comfort Cap – Pack of 2 1000-96-L LOCATOR® Core Tool 1000-99-L Angle Measure Guide

simplyfixed SMART PACKS Incl. Multi-Unit Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw Components for Multi-Unit Abutments

1000-681000-06D 1000-62 1000-63 4000-13

Screws require 1.25mmD Hex Tool

New

1000-661000-65 1000-671000-64 1000-09P 1000-69BP1000-69BG

Includes Fixation Screw [1000-05] [1000-25B]

NewNew

New

New

1000-97-L41000-95-L4 1000-95-L20

1000-94-L4 1000-94-L20

4500-26

1000-99-L1000-96-L

Components for Ball Abutments

36

Code DescriptionHD1.25 1.25mmD Hex ToolHD1.3B 1.3mmD Off-Axis Hex Tool HD2.0 2.0mmD Hex Insertion Tool (Retentive 0-Ring)

HD2.0SG 2.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)HD2.5 2.5mmD Hex Insertion Tool (Retentive 0-Ring)

HD2.5SG 2.5mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)HD3.0 3.0mmD Hex Insertion Tool (Retentive 0-Ring)

HD3.0SG 3.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

Code DescriptionHT1.25L 1.25mmD Straight Hex Tool, Long HT1.25 1.25mmD Straight Hex Tool

HT1.25S 1.25mmD Straight Hex Tool, ShortHT1.3LB 1.3mmD Off-Axis Hex Tool, Long HT1.3B 1.3mmD Off-Axis Hex Tool

HT1.3SB 1.3mmD Off-Axis Hex Tool, ShortHT2.0 2.0mmD Hex Insertion Tool (Retentive 0-Ring)

HT2.0S 2.0mmD Hex Insertion Tool, Short (Retentive 0-Ring)

HT2.0LG 2.0mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring)

HT2.0SG 2.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

HT2.5 2.5mmD Hex Insertion Tool (Retentive 0-Ring)

HT2.5S 2.5mmD Hex Insertion Tool, Short (Retentive 0-Ring)

HT2.5LG 2.5mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring)

HT2.5SG 2.5mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

HT3.0 3.0mmD Hex Insertion Tool (Retentive 0-Ring)

HT3.0S 3.0mmD Hex Insertion Tool, Short (Retentive 0-Ring)

HT3.0LG 3.0mmD Hex Insertion Tool, Long (Retentive Metal 0-Ring)

HT3.0SG 3.0mmD Hex Insertion Tool, Short (Retentive Metal 0-Ring)

Ratchet or Torque Wrench

Surgical and Prosthetic Instruments

Tapered Hex Tools

Code DescriptionTHT1.25 1.25mmD Tapered Hex Tool

THT1.25S 1.25mmD Tapered Hex Tool, Short

Handpiece/Surgical Motor

Manual

THT1.25STHT1.25

HT2.5

HT3.0

HT2.0LG

HT2.5LG

HT3.0LG

HT2.0

HT1.25

HT2.0SG

HT2.5SG

HT3.0SG

HT2.0S

HT2.5S

HT3.0S

HT1.25SHT1.25L

HT1.3SBHT1.3BHT1.3LB

NewNewNew

NewNew

NewNew

NewNew

HD1.25

HD3.0

HD2.0SG

HD2.5SG HD3.0SG

HD2.0

HD2.5

HD1.3B

New

New

New

New

Straight Hex and Insertion Tools

Hex and Insertion Tools

37

Code DescriptionR Surgical Ratchet

TW30 30Ncm Torque WrenchTW35 35Ncm Torque WrenchSSHM Universal Stainless Steel Handle (with 4.0mm square connection)

FMD Fixture-Mount DrillRB-06 Round Burr 0.6mmD

PAR Paralleling Tool 2.3/2.8mmDLDRILL LOCATOR® Drill

DE Drill ExtenderTWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm)

TW Spring Steel Torque Wrench (Torque range 0 - 90 N/cm)

ABH Analog HolderLDD LOCATOR® Driver 29.0mm, Handpiece

LDDS LOCATOR® Driver 23.0mm, HandpieceLDT LOCATOR® Square Driver 21.0mm, Wrench

LDTS LOCATOR® Square Driver 15.0mm, Wrench1000-96-L LOCATOR® Core Tool

DAP Off-Axis Driver Access Plug

Ancillary Instruments

Code DescriptionST Empty Surgical Tray

BST Basic Surgical TrayCST Complete Surgical Tray

Code DescriptionSKG- S Replacement Grommet, SmallSKG- M Replacement Grommet, MediumSKG- L Grommet for New Hex Insertion Tools, Large

Surgical Trays

Surgical and Prosthetic Instruments

ST

SKG-S

CST

SKG-L

BST

SKG-M

R TW30

PAR RB-06FMD DELDRILL ABH

TWM TWTW35 SSHM

1000-96-LLDT- LDTSLDD -LDDS DAP

New

NewNewNew

New

New

New

Grommets Grommets to insert tools in surgical trays.

38

3.2mmD Implants

Code DescriptionSD2.3 2.0/2.3mmD Step Drill with 6-16 Markings

SD2.3S 2.0/2.3mmD Step Drill with 6-10 MarkingsSD2.8 2.3/2.8mmD Step Drill with 6-16 Markings

SD2.8S 2.3/2.8mmD Step Drill with 6-10 MarkingsCBD3.2 Cortical Bone Drill for 3.0 and 3.2mmD Implants

SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

Surgical Drills

Code DescriptionSD3.4 2.8/3.4mmD Step Drill with 6-16 Markings

SD3.4S 2.8/3.4mmD Step Drill with 6-10 MarkingsCBD3.7 Cortical Bone Drill for 3.7mmD Implants

3.7mmD Implants SD3.4 SD3.4S CBD3.7

Code DescriptionSD4.4 3.8/4.4mmD Step Drill with 6-16 Markings

SD4.4S 3.8/4.4mmD Step Drill with 6-10 MarkingsCBD4.7 Cortical Bone Drill for 4.7mmD Implants

4.7mmD Implants SD4.4 SD4.4S

Code DescriptionSD3.8 3.4/3.8mmD Step Drill with 6-16 Markings

SD3.8S 3.4/3.8mmD Step Drill with 6-10 MarkingsCBD4.2 Cortical Bone Drill for 4.2mmD Implants

4.2mmD Implants SD3.8 SD3.8S

Code DescriptionD5.1 5.1mmD Straight Drill with 6-16 Markings

D5.1S 5.1mmD Straight Drill with 6-10 MarkingsSD5.4 4.8/5.4mmD Step Drill with 6-16 Markings

SD5.4S 4.8/5.4mmD Step Drill with 6-10 MarkingsCBD5.7 Cortical Bone Drill for 5.7mmD ImplantsCBD7.0 Cortical Bone Drill for 7.0mmD Implants

5.7 and 7.0mmD Implants D5.1 D5.1S SD5.4 SD5.4S

Code DescriptionSD4.8 4.4/4.8mmD Step Drill with 6-16 Markings

SD4.8S 4.4/4.8mmD Step Drill with 6-10 MarkingsCBD5.2 Cortical Bone Drill for 5.2mmD Implants

5.2mmD Implants SD4.8 SD4.8S

CBD4.2

CBD4.7

CBD5.2

CBD5.7 CBD7.0

39

Drill Sequence

3.2mmD Straight / Tapered Implant

3.7mmD Straight / Tapered Implant

4.2mmD Straight / Tapered Implant

4.7mmD Straight / Tapered Implant

5.2mmD Straight / Tapered Implant

3.5/3.7

3.5/4.2

4.5/4.7

4.5/5.2

3.0/3.2

5.7mmD & 7.0mmD Straight / Tapered Implant

SD4.4 3.8/4.4mmD

SD3.8 3.4/3.8mmD

CBD5.7 SD3.4 2.8/3.4mmD

Optional

SD4.8 4.4/4.8mmD

Optional

SD2.8 2.3/2.8mmD

Optional

SD2.3 2.0/2.3mmD

SD5.4 4.8/5.4mmD

Dense Bone Final

D5.1 5.1mmD

Soft Bone Final Optional Cortical Bone

Drillfor 5.7mmD

CBD3.7 SD2.3 2.0/2.3mmD

SD3.4 2.8/3.4mmD

Dense Bone Final

SD2.8 2.3/2.8mmD

Soft Bone Final Optional Cortical Bone

Drill

CBD3.2 SD2.3 2.0/2.3mmD

SD2.8 2.3/2.8mmD

Dense Bone FinalSoft Bone Final Optional Cortical Bone

Drill

CBD4.2 SD2.8 2.3/2.8mmD

Optional

SD2.3 2.0/2.3mmD

SD3.8 3.4/3.8mmD

Dense Bone Final

SD3.4 2.8/3.4mmD

Soft Bone Final Optional Cortical Bone

Drill

CBD4.7 SD3.4 2.8/3.4mmD

SD2.8 2.3/2.8mmD

Optional

SD2.3 2.0/2.3mmD

SD4.4 3.8/4.4mmD

Dense Bone Final

SD3.8 3.4/3.8mmD

Soft Bone Final Optional Cortical Bone

Drill

CBD5.2 SD3.4 2.8/3.4mmD

SD3.8 3.4/3.8mmD

Optional

SD2.8 2.3/2.8mmD

Optional

SD2.3 2.0/2.3mmD

SD4.8 4.4/4.8mmD

Dense Bone Final

SD4.4 3.8/4.4mmD

Soft Bone Final Optional Cortical Bone

Drill

5.7/7.0

CBD7.0

Optional Cortical Bone

Drillfor 7.0mmD

5.7/5.7

40

THT1.25S HT1.25S HT2.0S HT2.5S HT3.0S

THT1.25

PAR (4)

LDRILL DE

R

SSHM

HT1.25 HT2.0 HT2.5 HT3.0

HD2.0 HD1.25 FMD HD3.0HD2.5

SD2.8 SD2.8S

D5.1 D5.1S

SD2.3 SD2.3S

SD5.4 SD5.4S

SD4.8 SD4.8S CBD5.2SD4.4 SD4.4S CBD4.7SD3.8 SD3.8S CBD4.2SD3.4 SD3.4S CBD3.7CBD3.2

CBD5.7

lower level of surgical tray

Surgical Tray

Optional place for InterActive tools

(not included)

CBD7.0

41

Surgical Tray

Inside Empty Tray

Lid

Surgical Tray Contents Complete Tray Basic Tray Code Description

ST Empty Surgical Tray X XSD2.3 2.0/2.3mmD Step Drill, 6-16 Markings X X

SD2.3S 2.0/2.3mmD Step Drill, 6-10 Markings XSD2.8 2.3/2.8mmD Step Drill, 6-16 Markings X X

SD2.8S 2.3/2.8mmD Step Drill, 6-10 Markings XCBD3.2 Cortical Bone Drill for 3.0 and 3.2mmD Implants XSD3.4 2.8/3.4mmD Step Drill, 6-16 Markings X X

SD3.4S 2.8/3.4mmD Step Drill, 6-10 Markings XCBD3.7 Cortical Bone Drill for 3.7mmD Implants XSD3.8 3.4/3.8mmD Step Drill, 6-16 Markings X X

SD3.8S 3.4/3.8mmD Step Drill, 6-10 Markings XCBD4.2 Cortical Bone Drill for 4.2mmD Implants XSD4.4 3.8/4.4mmD Step Drill, 6-16 Markings X X

SD4.4S 3.8/4.4mmD Step Drill, 6-10 Markings XCBD4.7 Cortical Bone Drill for 4.7mmD Implants XSD4.8 4.4/4.8mmD Step Drill, 6-16 Markings X X

SD4.8S 4.4/4.8mmD Step Drill, 6-10 Markings XCBD5.2 Cortical Bone Drill for 5.2mmD Implants X

D5.1 5.1mmD Straight Drill, 6-16 Markings X XD5.1S 5.1mmD Straight Drill, 6-10 Markings XSD5.4 4.8/5.4mmD Step Drill, 6-16 Markings X X

SD5.4S 4.8/5.4mmD Step Drill, 6-10 Markings XCBD5.7 Cortical Bone Drill for 5.7mmD Implants XCBD7.0 Cortical Bone Drill for 7.0mmD Implants X

Hex and Insertion ToolsTHT1.25 1.25mmD Tapered Hex Tool, Manual X X

THT1.25S 1.25mmD Tapered Hex Tool Short, Manual XHT1.25 1.25mmD Straight Hex Tool, Ratchet X X

HT1.25S 1.25mmD Straight Hex Tool Short, Ratchet XHT2.0 2.0mmD Hex Insertion Tool, Ratchet X X

HT2.0S 2.0mmD Hex Insertion Tool Short, Ratchet XHT2.5 2.5mmD Hex Insertion Tool, Ratchet X X

HT2.5S 2.5mmD Hex Insertion Tool Short, Ratchet XHT3.0 3.0mmD Hex Insertion Tool, Ratchet X X

HT3.0S 3.0mmD Hex Insertion Tool Short, Ratchet XHD1.25 1.25mmD Hex Tool, Handpiece X XHD2.0 2.0mmD Hex Insertion Tool, Handpiece XHD2.5 2.5mmD Hex Insertion Tool, Handpiece X XHD3.0 3.0mmD Hex Insertion Tool, Handpiece X

Ancillary InstrumentsFMD Fixture-Mount Drill X

LDRILL LOCATOR® Drill X XDE Drill Extender X XR Surgical Ratchet X X

PAR (x4) Paralleling Tool 2.3/2.8mmD X XSSHM Universal Stainless Steel Handle X

CAT-LEGACY-EN, Rev. 09-2017

Implant Direct Europe AGHardturmstrasse 161

CH-8005 ZürichTollfree Infoline 00800 4030 4030

www.implantdirect.eu