We know how.www.leister.com
Swiss made
2018 /19General Catalog | US-Edition
Plastic WeldingProfessional equipment for workshops
and construction sites
www.leister-group.com
Leister Technologies AG, factory, Sarnen, Switzerland Leister Technologies AG, factory, Kaegiswil, Switzerland
Leister Technologies AG, Corporate Center, Kaegiswil, Switzerland
Leister delivers performance.
For over 65 years, Leister has been the worldwide leader in
the field of plastic welding and industrial hot-air applications.
In addition, we also offer innovative and effective lasersystems
and microsystems. Leister is proud to develop and produce all
products in Switzerland – so you can always rely on the proverbial
Swiss made quality.
Over 98 percent of our products are exported. With an
established network of 130 sales and service centers all
over the globe, you will find a Leister partner guaranteed.
We are local worldwide.
Leister Technologies GmbH,
Hagen, Germany
Leister Technologies LLC,
Itasca, USA
Leister Technologies Ltd.,
Shanghai, China
Leister Technologies Benelux BV,
Houten, Holland
Leister Technologies India Pvt,
Chennai, India
Leister Technologies KK,
Yokohama, Japan
Leister Technologies Italia S.r.l.,
Milan, Italy
3
For decades now, Leister has been the worldwide market leader.
The performance and reliability of our products makes Leister
the first choice. Our tools are used in roofing, billboards,
tarpaulins, civil engineering, tunneling, landfills, flooring, plastic
fabrication, and shrinking to name a few.
Hot-air is increasingly deployed in industrial processes.
Typical applications include activating, heating, curing, melting,
shrinking, welding, sterilizing, drying and warming to name a
few. Leister customers profit from our extensive engineering
knowledge and benefit from our recommendations during the
conceptual design of hot-air applications.
Leister’s innovative and patented laser bonding solutions provide
alternative production processes in automotive, medical, sensor,
electronics and textile manufacturing as well as microsystems
technology. Our clean, precise and non-invasive laser technology
can also be applied to process heat applications.
4 www.leister.com
Plastic welding with LeisterLeister Technologies AG provides the appropriate high quality
welding device for all sectors of the plastics processing
industry. Our tools are used in sealing systems on roofs, plas-
tic sheeting, floor coverings, in earthworks, hydraulic and tunnel
engineering, equipment manufacturing and vehicle repair.
However demanding the task, we provide an applicable solution.
Research and developmentWith years of experience in plastic processing and industrial pro-
cesses we are the ideal partner to work your plastic application.
We have dedicated ourselves to constantly develop new, and to
persistently improve existing products. We strive to provide our
customers with outstanding quality, reliability, performance and
cost-efficient products.
Quality managementAs an innovative company, Leister commits to transparent and
consistent quality management. Leister Technologies AG is
certified to comply with the ISO 9001 quality standards. All
processes are regularly audited and improved to comply with
all quality-relevant criteria; therefore, our products enjoy a
reputation of providing reliable service even after years of use
under adverse conditions.
Testing and certificationOur products are designed and developed to comply with
nationally and internationally recognized standards. This includes
both product-specific standards—such as ISO, IEC, EN or
UL standards—as well as application-specific standards. For
our client‘s protection, tests are carried out by accredited and
independent test institutes. The products are then certified and
qualified to carry the marking of conformity.
Application and laboratory testingOur team of experts will assist you in choosing the right
equipment for your application process. Running test series on
your applications will help optimize processes. The equipment
of the application laboratory allows comprehensive testing for
process analysis and documentation of the results.
More than 130 Sales and Service Centers in more than 100 countriesWe believe that the basis for customer satisfaction lies within the
quality of our products and the smooth running global service
network. A close network of more than 130 sales and service
centers in more than 100 countries ensures competent and
responsive service. Distributors and their staff are trained and
certified by Leister on a regular basis; therefore, Leister know-
how is locally available to you at all times.
5
We know how.
GEOSTAR G5/G7
8 – 35
36 – 47
68 – 89
48 – 67
90 – 105
106 – 115
116 – 118
Floo
ring
and
Inte
rior
Dec
orat
ion
Pla
stic
Fab
ricat
ion
Civ
il E
ngin
eerin
g /
G
EO
Roo
fing
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
Hot
-Air
Han
d T
ools
ContentsRoofing Technical Textiles and Industrial FabricsCivil Engineering / GEOPlastic Fabrication Flooring and Interior Decoration
Hot-air hand toolsBlowersGeneral accessoriesWelding rods
Special applications
Shrinking
Roofing Automatic welders Testing instruments
Technical Textiles and Industrial Fabrics
Advertising (signs and banners)Tarpaulins/coverings for trucksArchitectureInflatable / hoses and filtersOutdoor & clothing
Automatic welders
Civil Engineering / GEO
TunnellingLandfill constructionMiningPonds and reservoirsReservoirs and fisheries
Automatic welders Extrusion weldersTesting instruments
Plastic Fabrication Extrusion weldersWelding rods
Flooring and Interior Decoration
Welding floor coveringsGroove cutting
Hot-air welder Grooving machine
Weld Methods / Weld Types / Legal Information
9
10 / 11
12 – 15
13 – 15
16 / 17
18 / 19
20 / 21
23
24
25
26 / 27
28
29
30 / 31
31
32
34
35
Hot
-Air
Han
d T
ools
Hot-Air Hand Tools
Product overview
TRIAC ST
TRIAC AT
ELECTRON ST
HOT JET S
GHIBLI AW
GHIBLI
HOTWIND PREMIUM / SYSTEM
FORTE S3
AIRSTREAM ST
ROBUST
WELDING PEN R / WELDING PEN S
DIODE PID / DIODE S
MINOR
LABOR S
General accessories
Welding rod
TRIAC ST for use in the roughest of environments.
HOT JET S ideal for detail work on the roof.
DIODE S for use with draw welding on tank details.
10 www.leister.com
12 – 15 13 – 15 16 / 17 18 / 19 20 / 21 23 24 25
Product overview Hot-air hand tools
Type TRIAC ST TRIAC AT ELECTRON ST HOT JET S GHIBLI AW GHIBLI HOTWIND FORTE S3
Voltage V~ 120 120 120 / 230 120 120 / 230 120 / 230 120 3 × 230 /
3 × 400
Max. power W 1600 1600 2400 / 3400 460 1800 / 2300 1500 2300 10 000
Temperature °F 104 – 1292 104 – 1148 104 – 1202 68 – 1112 149 – 1148 68 – 1112 68 – 1202 68 – 1202
Size in inches (L × )
Handle ( )
13 × 4
2
13 × 4
2
13 × 4
2
9 × 3
1.6
11 × 9 × 4
2
8 × 3 × 6
2
13 × 4
7
15 × 5
8
Weight lbs (without cord)~ 2 2 2 1.3 3 2 5 10
Integrated blower
Digital display
Conformity mark
Approval mark
Protection class
Applications
Outdoor use
Indoor use
Roofing
Billboards / Tarpaulins
Civil engineering /
Tunneling / Landfills
Plastic fabrication
Flooring / Interior design
Shrinking
Catalog page
11
(R) (PID)
26 / 27 28 29 30 / 31 31 32
Hot
-Air
Han
d T
ools
Type AIRSTREAM ST ROBUSTWELDINGPEN R / S
DIODEPID / S
MINOR LABOR S
Voltage V~ 230 3 × 230 /
3 × 400120 120 230 120
Max. power W 215 250 600 1600 100 600 / 700
Temperature °F 68 – 1112 68 – 1112 68 – 1112
Size in inches (L × )
Handle ( )
24 × 10 × 14 9 × 9 11 × 1
1.3
10 × 2
1.6
9 × 4
2.5
7 × 2
1.3
Weight lbs (without cord)~ 53 18 2 3 2.5 0.33
Integrated blower
Digital display
Conformity mark
Protection class
Applications
Outdoor use
Indoor use
Roofing
Billboards / Tarpaulins
Civil engineering /
Tunneling / Landfills
Plastic fabrication
Flooring / Interior design
Shrinking
Catalog page
Product overview Hot-air hand tools and Blowers
12 www.leister.com
1
2
3
4
5
4
5
2
1
3
5
4
Product advantage
TRIAC ST – Design meets experience
The TRIAC ST is primarily used for welding and plastic fabrication. During its development, a deliberate choice was
made to do without extra technical features. Instead it is distinguished by its robust design, reliability, versatility, and
user-friendly features, like its predecessor the TRIAC S. A prominent feature is the two-component handle, which is
not only attractive, but also gives the user perfect grip. The low weight—of less than one kilogram (2.2 lbs)—ensures
perfect weight balance.
Ergonomic handling:The two-component handle and per-
fect tool balance ensure ideal grip and
optimum working even under the
toughest conditions.
Perfect weight:Weighing less than 2.2 lbs, the
TRIAC ST is even lighter than its
predecessor.
Always keeps a cool head: There is an actively cooled protective
tube for greater work safety.
Welding power: Thanks to the optimized,
highly robust motor, TRIAC ST
guarantees high welding power.
Reliability:A new temperature manager and a
high dust resistance provide the heat-
ing elements with a long service life.
Swiss thoroughness: The air filters, located on either side,
easily can be removed and cleaned.
This ensures optimum air flow and
maximum power output.
Optimum protection: The filters offer active protection
against moisture and dust.
13
Hot
-Air
Han
d T
ools
Hot-air hand tool
TRIAC ST
• Suitable for the work site
• Functional design: two-component handle grip and
optimum center of gravity ensure good ergonomics
• Quick clean air filters
• Automatic carbon stop and heating element protection
provide auto matic protective measures
• Suitable for the work site
• Closed-loop controlled temperature
• Open loop controlled air volume
• Intelligent “e-Drive” operating unit
• Ergonomic handling
• Modern design
Hot-air hand tool
TRIAC AT
TRIAC AT: Robust and intelligent.
The TRIAC AT is an intelligent hot-air hand tool—for welding and shrinking plastics—that is suitable for on-site use. It
is designed for the needs of even the most demanding professional. Every tool undergoes stringent quality checks
prior to leaving the factory in Switzerland. This high-quality hot-air hand tool is equipped for all situations. Its univer-
sal areas of application are virtually unlimited. The TRIAC AT will continue to prove its merit in any weather condition
and is just as effective outside as it is indoors – all during continuous operation.
Technical data
Voltage V~ 120
Frequency Hz 50 / 60
Power W 1600
Temperature °F 104 – 1148
Air volume (68°F) cfm 7.4 - 9.9 (17.7 cfm at max. temp)
Dynamic pressure Pa 1600 - 3000
Nozzle holder inch 1.24
Emission dB(A) 67
Size (L × ) inches 13 × 4, handle 2
Weight lbs 2 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.:141.316 TRIAC AT, 120 V / 1600 W, with US plug, °F
141.382 TRIAC AT, 120 V / 1600 W, with US plug, °C
Technical data
Voltage V~ 120
Frequency Hz 50 / 60
Power W 1600
Temperature °F 104 – 1292
Air volume (68°F) cfm 9.9 (17.7 cfm at max. temp)
Dynamic pressure Pa 3000
Nozzle holder inch 1.24
Emission dB(A) 67
Size (L × ) inches 13 × 4, handle 2
Weight lbs 2 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.:141.228 TRIAC ST, 120 V / 1600 W for push-fit nozzles with US plug / UL
141.227 TRIAC ST, 230 V / 1600 W for push-fit nozzles with Euro plug
version for screw-on nozzle
14 www.leister.com
107.123107.132107.133107.135107.129107.131
105.475105.485105.494
105.487
105.500
107.130
107.125
105.503
100.303
105.575
106.982
105.576
106.996
107.124
D
105.431
105.432
105.433
C
107.139
107.137
A
B
B
106.992106.993
106.989106.990106.991
156.470
Accessories TRIAC ST / TRIAC AT
Wide slot nozzle, push-fit
0.8” (20 mm), angled
1.6” (40 mm), angled
1.6” (40 mm), perforated
1.6” (40 mm), PTFE-coated
2.4” (60 mm) for bitumen
3.1” (80 mm) for bitumen
(more: www.leister.com
¨downloads¨)
Wide slot nozzle
0.8” (20 mm), straight
0.98” (25 mm), straight
1.2” (30 mm), 15° angled
Wide slot nozzle 0.8” (20 mm), curved
and angular, with inward clamping
angle
Wide slot nozzle 0.8” (20 mm),
120° angled (right) 30° slanted
forward openly
Wide slot nozzle 1.6” (40 mm), 60°
bent
0.8” (20 mm) angled nozzle, 60°,
push-fit, for right hander
0.8” (20 mm) angled nozzle, 60°,
push-fit
0.2” (5 mm), tubular nozzle,
push-fit
0.2 x 3.9” (5 x 100 mm), tubular
nozzle, push-fit
0.2 x 5.9” (5 x 150 mm), extension
nozzle, push-fit
tubular nozzle 0.2” (5 mm),
90° curved
Tacking nozzle,
push-fit on 0.2” (5 mm) tubular
nozzle
0.8” (20 mm) angled nozzle, 70°,
push-fit
0.12” (3 mm) speed weld nozzle,
with small air-slide,push-fit on 0.2”
(5 mm) tubular nozzle
0.16” (4 mm) speed weld nozzle,
with small air-slide, push-fit on
0.2” (5 mm) tubular nozzle
0.2” (5 mm) speed weld nozzle,
with small air-slide, push-fit on
0.2” (5 mm) tubular nozzle
0.18” × 0.5” speed weld nozzle for
fillet weld, push-fit on 0.2” (5 mm)
tubular nozzle
0.31” (8 mm) speed weld nozzle for
tape welding, push-fit on
0.2 (5 mm) tubular nozzle
Speed weld nozzle, push-fit on
0.2” (5 mm) tubular nozzle
0.22” (5.7 mm), profile A
0.28” (7 mm), profile B
0.12” (3 mm)
0.16” (4 mm)
0.2” (5 mm)
Speed weld nozzle bend 0.2”
(5 mm) , push-fit on 0.16 (4mm) and
0.2” (5 mm) tubular nozzle
Mirror welding
Overlap welding
15
105.622
106.988
126.552
D
113.666
113.399
113.876
113.874
A
B
113.670
113.877
106.986
106.987
157.717
107.344
143.833
143.332
156.092
141.375
107.324
107.337
107.338
107.326
107.307
107.339
106.128
142.717
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
ools
142.718
0.5” × 0.4” (12 x 10 mm) sieve reflec-
tor, push-fit on 0.3” tubular nozzle
2.0” × 1.4” (50 x 35 mm)
sieve reflector, push-fit
1.37” × 0.8” (35 x 20 mm)
sieve reflector, push-fit
1.0” × 6” (25 x 150 mm) shell reflec-
tor, push-fit
1.1” × 1.4” (27 x 35 mm) spoon
reflector, push-fit
0.66” × 1.33” (27 x 34 mm)
soldering reflector, push-fit
0.3” (7.5 mm)
soldering reflector
Heating element for
TRIAC ST / TRIAC AT, 120 V / 1550 W
TRIAC ST / TRIAC AT, 230 V / 1550 W
TRIAC S, 120V / 1600 W
0.2” (5 mm) tubular nozzle,
screw-on
Tacking nozzle, screw-on
0.16” (4 mm) drawing nozzle,
screw-on for fluor plastics
0.12” (3 mm) drawing nozzle
with tacking tip, screw-on
0.16” (4 mm) drawing nozzle
with tacking tip, screw-on
0.12” (3 mm) drawing nozzle
without tacking tip, screw-on
0.16” (4 mm) drawing nozzle
without tacking tip, screw-on
Drawing nozzle triangular-shaped,
With tacking tip, screw-on
0.22” (5.7 mm), profile A
Without tacking tip, screw-on
0.22” (5.7 mm), profile A
Without tacking tip, screw-on
0.28” (7 mm) profile B
Without tacking tip 0.28 × 0.22” (7 x
5.7 mm)
Protection nozzle 31.5 mm (1.24”),
air outlet 23 mm (0.9”), protection ring
80 mm (3.15”)
5.31” (135 mm) welding mirror,
push-fit
Nozzle adapter for screw-on nozzles
Protection tube for screw-on nozzles
(for TRIAC ST until april 2017)
Protection tube for screw-on nozzles
(for TRIAC ST from mai 2017)
Connection adapter M14 for 0.83
inch nozzle with plug
General accessories
Draw welding Shrinking
142.717100.702
More at the new accessories catalog at
16 www.leister.com
4
5
1
2
3
44
3
2
1
55
4
ELECTRON ST – Strong, compact and handy
The new ELECTRON ST is a real powerhouse among Leister's hand tools. The appearance of this tool has been
modeled after the new TRIAC range. For the user, this means improved ergonomics and, as a result, the ability to
work in more comfort. Existing ELECTRON nozzles fit the new model.
Powerful: Suitable for any application thanks to
its outstanding power rating of up to
3400 W.
Perfectly ergonomic: 3.5 ounces lighter and with a
two-component handle that’s nearly
1/2 inch slimmer than its predecessor.
Infinitely adjustable: Easy air temperature adjustment up
to 1202°F.
Product advantages
Clean: Air filters, located on either side, can
be removed and cleaned in no time
at all.
Compatible: All predecessor nozzles fit the
ELECTRON ST.
17
107.258
107.653
151.068
107.270
107.229
107.331
107.330
107.327
107.333
106.127
107.340
107.346
142.281
107.134
160.842
148.933
145.606149.675
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
ools
Hot-air hand tool
ELECTRON ST Accessories, ELECTRON ST
• Suitable for construction sites
• Leister's most powerful hand tool
• Easy-clean air filter
• Carbon stop and heating element protection provide
automatic protective measures
• Sturdy tool case supplied
Heating shrink tubes/sleeves is just one of many applications
for which the ELECTRON ST can be used.
General accessories
Technical data
Voltage V~ 230 / 230 / 120
Frequency Hz 50 / 60
Power W 2300 / 3400 / 2400
Temperature °F 104 – 1202
Air volume (68°F) cfm 15.2 (27.9 at max. temp)
Dynamic pressure Pa 3400
Nozzle holder mm 50
Emission dB(A) 67
Size (L × ) inches 13 × 4”, handle 2”
Weight Lbs 2 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.145.562 ELECTRON ST, 120 V/2400 W for push-fit nozzles with US plug
145.574 ELECTRON ST, 230 V/3400 W for push-fit nozzles, without plug
Wide slot nozzle, push-fit
2.8 × 0.4» (70 x 10 mm), for bitumen
Wide slot nozzle, 3" flat nozzle
Wide slot nozzle 3 × 0.08”
(75 x 2 mm), push-fit
Tool stand for 107.653
Wide slot nozzle 6 × 0.5”
(150 x 12 mm), push-fit
Round nozzle 0.8” (20 mm)
2.83 × 2.8” (72 x 70 mm) folding
reflector, push-fit
5 × 0.85” (125 x 22 mm) folding
reflector, push-fit
3 × 3” (85 x 85 mm) sieve reflector,
push-fit
5.1 × 5.9” (130 x 150 mm) sieve
reflector, push-fit
2.6” (65 mm) sieve reflector,
push-fit
2 × 10” (45 x 250 mm) shell reflector,
push-fit
10.6” (270 mm) welding mirror,
push-fit
Scraper nozzle
Tape welding nozzle 1.6” (40 mm)
Protection nozzle, air outlet 44 mm
(1.73”), protection ring 10 mm (0.39”)
Protective tube
Heating elements
230 V / 3300 W
230 V / 2200 W
120 V / 2300 W145.604
107.266
More at the new accessories catalog at
18 www.leister.com
107.141
107.142
105.549
107.144
105.567
105.566
105.556
106.996
D
106.989
106.990
106.991
156.470
A
B
106.992
106.993
D
105.431
105.432
105.433
Hot-air hand tool
HOT JET S
• The smallest Leister hot-air hand tool
• Stepless, electronically controlled temperature
• Stepless, electronically controlled air flow
• Low noise
• Flexible, integrated tool stand
Accessories HOT JET S
HOT JET S is especially suited for precise work.
HOT JET S: Small and powerful.
As Leister's most compact hot-air hand tool, the light
weight of the 1.3 lb HOT JET S (including cord and slim
handle), ensures high-powered, fatigue-free welding.
Technical data
Voltage V~ 120
Frequency Hz 50 / 60
Power W 460
Temperature °F 68 – 1112
Air volume (68°F) cfm 2.1 – 4.9 (6.7 at max. temp)
Pressure static Pa 230 – 1600
Nozzle holder inch 0.8
Emission dB(A) 59
Size (L × ) inches 9 × 3, Handle 1.6
Weight lbs 1.3 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.: 100.859 HOT JET S, 120 V / 460 W with US plug (UL)
100.861 HOT JET S, 120 V / 460 W, with US plug
0.6” (15 mm) wide slot nozzle, push-fit
0.8” (20 mm) wide slot nozzle, push-fit
0.4 x 0.08” (10x 2mm) wide slot nozzle
0.2” (5 mm) tubular nozzle,
push-fit
0.2 × 6” (5 x 150 mm) extension
nozzle, straight
0.3” (8 mm) tubular nozzle, straight
0.8” (20 mm) angled nozzle, 70°
angled, push-fit
Tacking nozzle, push-fit on 0.2” or
3/16" (5 mm) tubular nozzle
0.12” or 1/8" (3 mm) speed welding
nozzle, push-fit on 0.2” (5 mm)
tubular nozzle
0.16” or 5/23" (4 mm) speed welding
nozzle, push-fit on 0.2” (5 mm)
tubular nozzle
0.2” or 3/16" (5 mm) speed welding nozz-
le,push-fit on 0.2” (5 mm) tub. nozzle
Speed weld nozzle bend 0.2”
(5 mm), push-fit on 0.2” (5 mm)
tubular nozzle
0.22” (5.7 mm) A profile speed wel-
ding nozzle, push-fit
0.28” (7 mm) B profile speed welding
nozzle, push-fit
0.12” or 1/8" (3 mm) speed welding
nozzle, with small air-slide, push-fit
on 0.2” (5 mm) tubular nozzle
0.16” or 5/32" (4 mm) speed welding
nozzle, with small air-slide, push-fit
on 0.2” (5 mm) tubular nozzle
0.2” or 3/16" (5 mm) speed welding
nozzle, with small air-slide, push-fit
on 0.2” (5 mm) tubular nozzle
19
C
107.137
107.139
107.324
107.146
107.151
107.148
107.310
107.311
107.312
107.305
143.831
114.734
100.818
131.867
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
ools
Heating a shrink sleeve with the HOT JET S outfitted with a
push-fit sieve reflector.
HOT JET S with angled nozzle welding a T-joint on the roof.
Small and handy: The HOT JET S is perfect when welding
complicated details in billboard and tarpaulin applications.
0.3” (8 mm) speed welding nozzle for
tape welding, push-fit on 0.2” (5
mm) tubular nozzle
0.18 × 0.5” (4.5 x 12 mm) speed wel-
ding nozzle for fillet weld, push-fit on
0.2” (5 mm) tubular nozzle
0.5 × 0.4” (12 x 10 mm) sieve
reflector, push-fit on 0.2” (5 mm)
tubular nozzle
0.08” (2 mm) soldering nozzle
0.16” (4 mm) soldering nozzle
0.12 × 0.06” (3 x 1.5 mm) solderingnozzle, oval
1.4 × 0.8” (35 x 20 mm) sieve
reflector, push-fit
2.0 × 1.4” (50 x 35 mm) sieve
reflector, push-fit
1.0 × 1.2” (25 x 30 mm) spoon
reflector, push-fit
0.6 × 1” (15 x 25 mm) ironing nozzle
Nozzle adapter for screw-on nozzles
Ski repair nozzle with base plate
120 V / 435 W heating element103.607
General accessories
0.2” (5 mm), tubular nozzle, 90°
angled, push-fit
More at the new accessories catalog at
20 www.leister.com
1
2
3
4
5
6
3
1
2
4
2
3
4
65 6
GHIBLI AW: Robust and ergonomic.
The GHIBLI AW is the robust and ergonomic heat gun used for shrink applications in cable manufacturing, heating
and forming in the automobile industry, lap welding of truck sheeting and for deburring plastic parts. Thanks to the
easy-to-grip, two-component frame, the GHIBLI AW fits perfectly in the hand. Temperature and air volume easily
can be adjusted with the proven and intuitive "e-Drive" operating unit. The stand—included in the scope of delivery—
Heat gun
GHIBLI AW
Stand:Thanks to the included stand, the GHIBLI
AW can be placed in an optimum position
at the workstation, thus reducing fatigue.
Practical air filter: Regular cleaning of the air filters ensures
optimum air flow and maximum power.
Leister “e-Drive”:Temperature and air volume are easy to
control and inspect—with the proven
"e-Drive" operating unit—for reproduc-
ible results.
Fatigue-free working:Thanks to the integrated
suspension lug, the GHIBLI AW
can be suspended for
fatigue-free work.
Compatible:All of its predecessor’s nozzles also fit on
the GHIBLI AW. Comprehensive selection
of compatible accessories.
Ergonomic handling:The two-component handle, and the
GHIBLI’s perfect balance, ensure an
optimal grip and comfortable work, even
under the harshest of conditions.
21
106.998
106.999
107.154
107.006
107.308
107.309
107.313
107.314
107.319
107.345
158.474
107.007
106.132
145.582
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
oolsand the practical device suspension make working eas-
ier. The air filters can be readily removed and cleaned.
And of course, all of the nozzles from its predecessor fit
the new GHIBLI AW. Shrink applications in cable manufacturing – ideal with the
GHIBLI AW.
• Ergonomic heat gun
• Digital temperature control
• Five-stage air volume control
• "e-Drive" operating unit for optimum process control
• 100% Swiss made
Heat gun
GHIBLI AW Accessories for GHIBLI AW
Wide slot nozzle 0.8” (20 mm), push-fit
Wide slot nozzle 1.6” (40 mm) inch
push-fit
Tubular nozzle 0.2” (5 mm) push-fit
Extension nozzle
0.2 × 5” (5 x 130 mm), straight
Sieve reflector 2 × 1.4 (50 x 35 mm)
Sieve reflector 1.4 × .8” (35 x 20 mm)
Spoon reflector 1 × 1.2” (25 x 30 mm),
with screw connector
25 x 30 mm spoon reflector, push-fit
Sieve reflector 2.6” (65 mm)
Welding mirror 5.3” (135 mm),
push-fit
Protection nozzle 36.5 mm (1.44”),
air outlet 23 mm (0.9”), protection ring
80 mm (3.15”)
1.45” (37 mm) Dehorning nozzle
1.8 × 9.8” (45 x 250 mm)
shell reflector, push-fit
Heating element, 120 V / 1700 W145.580
General accessories
Technical data
Voltage V~ 120
Frequency Hz 50 / 60
Power W 1800
Temperature °F 149 – 1148
Air volume (68°C) cfm 10.9 – 14.1 (24.7 at max. temp)
Pressure static Pa 1800 – 3200
Nozzle holder inches 1.5 (36.5 mm)
Emission dB(A) 67
Dimensions (L × W × H) inches 11 × 9 × 4, Handle 2
Weight lbs 3 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.: 148.078 GHIBLI AW, 120 V / 1800 W, US plug
Scope of delivery: GHIBLI AW, case, stand, operating Instructions
More at the new accessories catalog at
23
106.998
106.999
107.154
107.006
107.308
107.309
107.313
107.314
107.319
158.474
107.007
107.345
106.132
115.513
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
ools
• Universal tool for welding and shrinking
• Welding results independent of voltage fluctuations and
ambient temperature
• Two-step selectable airflow
Hot-air hand tool
GHIBLI
GHIBLI: “The hot-air gun”.
GHIBLI, derived from a hot desert wind, certainly lives
up to its name. Thanks to its two-step airflow switching
and steplessly adjustable temperature, the GHIBLI can
be used for the most diverse applications.
0.8” (20 mm) wide slot nozzle, push-fit
1.6” (40 mm) wide slot nozzle
0.2” (5 mm) tubular nozzle,
push-fit
0.2 × 5” (5mm x 130 mm) extensi-
on nozzle, straight
1.4 x 2” (34 x 50 mm) sieve reflector
0.8 x 1.4” (20 x 35 mm) sieve reflector
1 × 1.2” (25 x 30 mm) spoon reflector,
with screw connector
1 × 1.2” (25 x 30 mm) spoon reflector,
push-fit
2.55” (65 mm) sieve reflector,
push-fit
Protection nozzle 36.5 mm (1.44”),
air outlet 23 mm (0.9”), protection ring
80 mm (3.15”)
1.45” (37 mm) Dehorning nozzle
5.3” (135 mm) welding mirror, push-fit
5.90 × 1.0” (150 x 25 mm) shell
reflector, push-fit
120 V / 1500 W heating element
Shrinking cable connections with the GHIBLI.
Accessories GHIBLI
101.850
General accessories
Technical data
Voltage V~ 120
Frequency Hz 50 / 60
Power W 1500
Temperature °F 68 – 1112
Air volume (68°F) cfm 10.6 / 12.4 (18.7 at max. temp)
Nozzle holder inches 1.5
Emission dB(A) 70
Size (L × W × H) inches 8 × 3 × 6 , Handle 2
Weight lbs 2.0 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.: 101.887 GHIBLI 120 V / 1500 W with US plug
101.891 GHIBLI 120 V / 1500 W with US plug (UL)
Additional versions available upon request
More at the new accessories catalog at
24 www.leister.com
ab
107.260107.259105.977107.263107.262105.992105.991
a
125.317
107.335
107.248
141.723
143.530
• Ideal for warming, heating, forming and drying
• Stepless adjustment of the heater and blower
• Integrated device and heating element protection
• Extremely smooth running
• Ideal for 24/7 operation
Hot-air hand tool
HOTWIND PREMIUM / SYSTEM
Accessories
HOTWIND PREMIUM / SYSTEM
The HOTWIND hot air blower is perfectly-suited for drying and
baking of print onto plastic components.
HOTWIND: The new dimension.
Weighing just 6.6 lbs, the HOTWIND can be used
either as an integrated or bench-top device. The high ma-
ximum temperature—1,472 °F (800°C)—means that the
HOTWIND can be used in a variety of ways.
Wide slot nozzle, push-fit (a × b)
3.3 × 0.6” (85 x 15 mm)
6 × 0.5” (150 x 12 mm)
7.8 × 0.35” (200 x 9 mm)
9.8 × 0.5” (250 x 12 mm)
11.8 × 0.16” (300 x 4 mm)
15.7 × 0.16” (400 x 4 mm)
19.7 × 0.16” (500 x 5 mm)
Flange connector, push-fit
a = 3.54” (90 mm)
6” (150 mm) sieve reflector,
push-fit
Stainless steel filter, push-fit
on air intake
Hand tool kit
(handle and protective tube)
120 V / 2200 W heating element
230 V / 3600 W heating element103.607
Technical data
Voltage V~ 120 / 230
Power W 2300 / 3700
Temperature °F 1202
Size (L × W × H) inches 13 × 4 × 7
Weight lbs 5 (without power cord)
Conformity mark
Protection class II
Article No.: 140.095 HOTWIND PREMIUM, 120 V / 2300 W, without plug
142.636 HOTWIND SYSTEM, 120 V / 2300 W, without Euro plug
142.609 HOTWIND PREMIUM, 230 V / 3700 W, with Euro plug
142.645 HOTWIND SYSTEM, 230 V / 3700 W, with Euro plug
Additional versions available upon request
25
Hot
-Air
Han
d T
ools
Hot-air hand tool
FORTE S3
Flameless shrink-wrapping of pallets and bulk goods with
the FORTE S3.
• Powerful pallet shrink-wrapping
• Uniform shrinkage
• May be used in confined spaces
• Integrated tool stand
FORTE S3: Flameless shrinking.
The most powerful hot-air hand tool from Leister.
The FORTE S3 is extremely well-suited for flameless
shrinking of pallets and bulk goods.
Technical data
Voltage V~ 3 × 230
Power kW 10
Temperature °F 1202
Size (L × W × H) inches 15 × 5 × 8
Weight lbs 10 (without power cord)
Conformity mark
Approval mark
Protection class II
Article No.: 102.030 FORTE S3, 3 x 230 V / 10 kW, with 32A-Cekon-plug
102.031 FORTE S3, 3 x 230 V / 10 kW, without plug
Additional versions available upon request
26 www.leister.com
1
2
3
4
1
4
3
2
AIRSTREAM ST: Quiet and efficient air supply unit.
Plug-in the AIRSTREAM ST for a constant, quiet supply of clean, dry, air. Need to work with two hand tools in parallel?
No problem, thanks to the simultaneous power and air supply, you can connect up to two hand tools in parallel. The
AIRSTREAM includes a handle and integrated tool tray, and casters (optional) for easy mobility. The AIRSTREAM ST
is a highly practical solution!
Dual operation: The two tool connections enable
simultaneous use of two hand tools, or
in series with independent settings.
The quick-change artist: Easily integrates into a workspace, or
under a bench, by removing the handle
and flipping the integrated tool tray
upside-down, or adding the optional
casters for portability.
Quality is measurable: Adjustable air flow for optimal welding
results as airflow determines energy
transfer and weld quality.
Automated cooldown cycle:Hand tools last longer when cared for
properly. The AIRSTREAM automatically
coos down the connected tools when
power is switched off. When the switch
is turned “on,” the tools automatically
return to previous temperature and
airflow settings as well.
27
159.535
159.481
Hot
-Air
Han
d T
ools
Blower
AIRSTREAM ST
• Quiet operation
• Cooldown mode
• Low energy consumption
• Two hand tools can be connected
• Compatible with WELDING PEN, DIODE and LABOR
• Flow meter
• Brushless technology
Accessories AIRSTREAM ST
Easy parallel operation.
A reliable companion.
AIRSTREAM ST, the quiet air supply unit.
Caster set
Air hose connection set
Technical Data
Voltage V~ 230
Power W 215
Frequency Hz 50
Air volume cfm 7.06 (Total)
Emission LpA (dB) < 48 (with 10 ft hose)
Size (L × W × H) inches 24 × 10 × 14 (with handle)
Weight lbs 53
Conformity mark
Protection class I
Scope of delivery:Air supply unit, hose transition pieces, clips, operating instructions
Article-No.: 158.822 AIRSTREAM ST, 230 V / 215 W, EU-plug
28 www.leister.com
107.354
107.281
113.859
101.031
Blower
ROBUST
ROBUST: The powerhouse.
Versatile and operable at high ambient temperatures of
up to 140 °F. Despite its small size, the ROBUST is a real
powerhouse. This blower can supply air for up to three
hot-air hand tools simultaneously.
Accessories ROBUST
ROBUST blower, serving as the external air supply for the
WELDING PEN.
• High-performance, compact design
• Sound-suppression
• Can be integrated at any position
• Can be used as an external air supply to 1 WELDING PEN R
or up to max. 3 DIODE S/ PID or max. 3 LABOR S
(with 107.281 hose adapter)
Stainless steel filter,
push-fit on air intake
1.5” (38 mm) hose connection
adapter, 3 output each 0.55” (14 mm)
0.55” (14 mm) air hose
0.55” (14 mm) hose clip for air hose
Technische Daten
Frequency Hz 50 60
Power W 250 250
Air volume (68 °F ) cfm 42 46
Static pressure psi 1.16 1.52
Max. ambient temperature °F 140 140
Max. air inlet temperature °F 140 140
Noise emission level dB(A) 62 62
Protection (IEC 60529) IP 54 IP 54
Outside diameter air inlet inches 1.5 (38 mm) 1.5 (38 mm)
Outside diameter air outlet inches 1.5 (38 mm) 1.5 (38 mm)
Weight lbs 18 18
Conformity mark
Protection class l
Artikel-Nr.:
Voltage V~ 50 Hz
60 Hz
1 × 120 1 × 230 3 × 230 / 400
3 × 440 – 480
Without cord Article No.: 103.434 103.42910 ft cord / Euro plug Article No.: 103.432
29
WELDING PEN R
WELDING PEN S
105.622
106.988
D
113.666
113.399
113.876
113.874
A
B
113.670
113.877
106.986
106.987
126.552
127.726127.727
141.375
113.412
www.leister.com/accessories 34 / 35
Hot
-Air
Han
d T
ools
• Digital temperature display (WELDING PEN R)
• Connection makes working easier
• Cooled heating element tube
• Used in combination with ROBUST blower, AIRSTREAM ST
or compressed air
External air hand tool
WELDING PEN R / WELDING PEN S Accessories WELDING PEN R / S
Swiveling air hose
for easy working.
WELDING PEN R, combined with angle adapters, make wel-
ding possible even in very tight spaces.
WELDING PEN: Slim and flexible.
The WELDING PEN is a hot-air hand tool optimized
for draw welding. Due to its slim design and swiveling
external air supply, the Welding Pen makes hard
work easy.
0.2” (5 mm) tubular nozzle, 15°
screw-on
Tacking nozzle, screw-on
0.12” (3 mm) round drawing nozzle
with tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
with tacking tip, screw-on
0.12” (3 mm) round drawing nozzle
without tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
without tacking tip, screw-on
Triangular drawing nozzle
with tacking tip, screw-on,
0.22” (5.7 mm) profile A
without tacking tip, screw-on
0.22” (5.7 mm), profile A
without tacking tip, screw-on
0.28” (7 mm), profile B
without tacking tip, screw-on
0.28 × 0.22» (7 x 5.5 mm)
0.16” (4 mm) drawing nozzle,
screw-on
for fluor plastics
Angular adapter for screw-on nozzles,
screw-on
30°
45°
Connection adapter M14 for
0.84”(21.3 mm) nozzle with plug
120 V / 600 W heating element for
WELDING PEN R and WELDING PEN S
113.597
General accessories
Technical data
Voltage V~ 120
Power W 600
Temperature °F 68 – 1112
Size (L × ) inches 11 × 2, handle 1
Weight lbs2 (with 10 ft cord / air hose and
Y-connection)
Conformity mark
Protection class II
Article No.: 114.576 WELDING PEN R, 120 V / 600 W, with US plug, 2.7 yards hose
113.708 WELDING PEN S, 120 V / 600 W, with US plug, 2.7 yards hose
114.380 WELDING PEN R, 230 V / 1000 W, with Euro plug, 2.7 yards hose
113.081 WELDING PEN S, 230 V / 1000 W, with Euro plug, 2.7 yards hose
114.926 WELDING PEN R, 230 V / 1000 W, with Euro plug, 6.6 m hose
114.274 WELDING PEN S, 230 V / 1000 W, with Euro plug, 6.6 m hose
114.927 WELDING PEN R, 230 V / 1000 W, with Euro plug, 9.8 m hose
114.273 WELDING PEN S, 230 V / 1000 W, with Euro plug, 9.8 m hose
More at the new accessories catalog at
30 www.leister.com
DIODE PID
DIODE S
34 / 35
External air hand tool
DIODE PID / DIODE S
• Operated with MINOR or ROBUST blower, AIRSTREAM ST
or with compressed air
• Digitally-controlled and displayed temperatures (DIODE PID)
• Cooled heating element tube
• Suitable for field applications when used in combination with
a MINOR blower
Convenient wire welding using the powerful and lightweight
DIODE PID.
MINOR blower and DIODE PID with screw-on drawing nozzle.
• Ideal for assembly work
DIODE PID / S: The powerful pair.
There are two options for high-quality work: The
closed-loop DIODE PID provides the perfect welding
temperature at all times. The DIODE S easily puts you in
control with a manual temperature knob.
Hand tool and blower
DIODE PID / DIODE S with MINOR
General accessories
Technical data
Voltage V~ 120
Power W 1600
Temperature °F 68 – 1112
Size (L × ) inches 10 × 2, handle 1.6
Weight lbs3 lbs
(with 10 ft cord / 10 ft air hose)
Conformity mark
Protection class II
Article No.: 101.291 DIODE S, 120 V / 1600 W, for push-fit nozzles, with US plug
101.292 DIODE S, 120 V / 1600 W, for screw-on nozzles, with US plug
101.311 DIODE PID, 120 V / 1600 W, for push-fit nozzles, with US plug
101.312 DIODE PID, 120 V / 1600 W, for screw-on nozzles, with US plug
101.281 DIODE S, 230 V / 1600 W, for snap-fit nozzles, with Schuko plug
101.303 DIODE PID, 230 V / 1600 W, for snap-fit nozzles, with Schuko plug
Additional versions available upon request
Technical data
Voltage V~ 120
Power W 1600
Temperature °F 68 – 1112
Size (L × ) inches 10 × 2, handle 1.6
Weight lbs6 lbs
(with 10 ft cord / 5 ft air hose)
Conformity mark
Protection class II
Article No.: 101.447 DIODE S, 120V / 1700 W, for push-fit nozzles, connected to MINOR
5 ft air hose, US plug
Additional versions available upon request
31
100.303
A
B
106.992106.993106.989106.990106.991156.470
106.996
143.833
100.296
100.689
105.622
106.988
D
113.666
113.399
113.876
113.874
A
B
113.670
113.877
106.986
106.987
126.552
141.375
www.leister.com/accessories
Hot
-Air
Han
d T
ools
• Lightweight and compact
• Powerful
• Serves as a mobile air supply for the DIODE PID / DIODE S
and LABOR S
• Suitable for work on construction sites
Blower
MINORAccessories DIODE PID / DIODE S
The MINOR blower as an air suppy for the DIODE PID.
With push-fit nozzle
With screw-on nozzle
MINOR: The mobile air supplier.
Don’t be deceived by the MINOR’s small size and low
weight. This blower delivers sufficient air to enable
quality work with the DIODE PID / DIODE S or LABOR S.
0.2” (5 mm) tubular nozzle, for
versions with push-fit nozzles
Heater tube for push-fit nozzles
Heater tube for screw-on nozzles
Speed welding nozzle,push-fit on
0.2” (5 mm) tubular nozzle
0.22” (5.7 mm), profile A
0.28” (7 mm), profile B
0.12” (3 mm)
0.16” (4 mm)
0.2” (5 mm)
0.2” (5 mm) bent
Tacking nozzle, push-fit on
0.2” (5 mm) tubular nozzle
Nozzle adapter for screw-on nozzles
120 V / 1600 W heating element
for DIODE PID
120 V / 1600 W heating element
for DIODE S
0.2” (5 mm) tubular nozzle,
screw-on
Tacking nozzle, screw-on
0.12” (3 mm) round drawing nozzle
with tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
with tacking tip, screw-on
0.12” (3 mm) round drawing nozzle
without tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
without tacking tip, screw-on
Triangular drawing nozzle, with tacking
tip, screw-on, 0.22” (5.7 mm)
Without tacking tip, screw-on
0.22” (5.7 mm), profile A
Without tacking tip, screw-on
0.28” (7 mm), profile B
0.28 × 0.22” (7 x 5.5 mm)
0.16” (4 mm) drawing nozzle, screw-
on, for fluor plastics
Connection adapter M14 for
0.84” (21.3 mm) nozzle with plug
100.650
100.702
100.300100.304
Technical data
Voltage V~ 120
Power W 100
Air volume (68°F) cfm 14.1
Pressure static psi 0.58
Air outlet (external) inches 0.6 (15 mm)
Size (L × ) inches 9 × 4, handle 2.5
Weight lbs 2.5 (with 10 ft cord)
Conformity mark
Protection class II
Article No.: 108.749 MINOR, 120 V / 100 W, with US plug
Additional versions available upon request
More at the new accessories catalog at
32 www.leister.com
107.144
A
B
106.992106.993106.989106.990106.991156.470
106.996
143.831
107.146
107.151
107.148
105.622
106.988
D
113.666
113.399
113.876
113.874
A
B
113.670
113.877
106.986
106.987
126.552
101.581
www.leister.com/accessories 34 / 35
External Air Hand Tool
LABOR S
• Temperature adjustment via rotary knob
• Very small and handy device
• Ideal for draw welding and tacking
• Air supply with ROBUST blower, AIRSTREAM ST, MINOR or
with compressed air
• Ideal for mobile use when coupled with MINOR blower
Accessories LABOR S
LABOR S, used in combination with MINOR as an
external air supply.
LABOR S: Small and handy.
Developed for laboratory use but also eminently suitab-
le for small welding tasks where access is difficult.
0.2” (5 mm) tubular nozzle, push-fit
Speed weld nozzle, push-fit on
0.2” (5 mm) tubular nozzle
0.22” (5.7 mm), profile A
0.28” (7 mm), profile B
0.12” (3 mm)
0.16” (4 mm)
0.2” (5 mm)
0.2” (5 mm) bent
Tacking nozzle, push-fit on 0.2”
(5 mm) tubular nozzle
Nozzle adapter for screw-on nozzles
0.08” (2 mm) soldering nozzle
0.16” (4 mm) soldering nozzle
0.12 × 0.06” soldering nozzle, oval
0.2” (4 mm) tubular nozzle,
screw-on
Tacking nozzle, screw-on
0.12” (3 mm) round drawing nozzle
with tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
with tacking tip, screw-on
0.12” (3 mm) round drawing nozzle
without tacking tip, screw-on
0.16” (4 mm) round drawing nozzle,
without tacking tip, screw-on
Triangular drawing nozzle, with tacking
tip, screw-on, 0.22” (5.7 mm)
Without tacking tip, screw-on
0.22” (5.7 mm), profile A
Without tacking tip, screw-on
0.28” (7 mm), profile B
0.28” × 0.22” (7 x 5.7 mm)
0.16” (4 mm) drawing nozzle,
screw-on,for fluor plastics
120 V / 600 W heating element101.643
General accessories
Technical data
Voltage V~ 120
Power W 600 / 700
Temperature °F 68 – 1112
Size (L × ) inches 7 × 2, handle 1.3
Weight lbs0.33 (without air hose and
without cord)
Conformity mark
Approval mark
Protection class II
Article No.: 101.721 LABOR S w/junction box, 120 V / 600 W w/US plug, 10 ft PVC hose, UL
101.740 LABOR S w/junction box, 120 V / 600 W, w/US plug, 10 ft silicon hose, UL
Additional versions available upon request
More at the new accessories catalog at
34 www.leister.com
106.974
140.160
140.599
140.161
140.598
106.976
106.972
106.981
138.314
111.346
111.348
106.966106.968
151.188
152.676
157.544
160.353
161.152
161.207
160.015
159.239
106.997
116.798
142.647
107.348
103.401
137.855
138.902
138.539
151.382
153.009
154.259
154.026
116.586
www.leister.com/accessories
The new “GROOVY” gouging tool also is perfectly suited for
floor joints.
Hot-air hand tools
General accessories
3” (80 mm) silicone pressure roller
1.6” (40 mm) silicone pressure roller
with ball bearings (silicone)
Spare roll for 140.160
1.1” (28 mm) silicone pressure roller
with ball bearings (silicone)
Spare roll for 140.161
1.1” (28 mm) PTFE pressure roller
Brass pressure roller with ball bearings
Pressure roller for custom seal
Seam probe tester for overlap seams
Chamfer planer with seven spare
blades, for sealing sheets
Spare blades kit containing ten blades
Hand grooving tool
Spare blades for hand grooving tool
Chamfer planer for T-joints for sealing
sheets
Weld seam template
Leister Universal scissors 10.2 inch
with special shaft grinding
Cable cord roller 27.3 yards (25 m)
PUR 5 x 2.5 mm2, with 1 x CEE 400V
and 2 x EU socket 230V
Cable cord roller 27.3 yards (25m) PUR
5x2.5mm2, with 1x CEE 400V and 2x
T23 CH socket 230V
Cable cord roller 27.3 yards (25m) PUR
5x2.5mm2, with 1x CEE 400V and 2x
Typ E with ground pin socket 230V
Cable extension cord 16 yards (15 m)
PUR 5 x 2.5 mm2, with CEE 400V plug
Cable extension cord 16 yards 15 m
PUR 3 x 2.5 mm2, with EU plug 230V
0.23” (6 mm) rotary burr for drilling
machine, for car repairs
Brass brush
Brass brush 0.12” (3 mm)
Tool rest for TRIAC AT, TRIAC ST,
ELECTRON ST
Tool rest for HOT JET, LABOR S
Leister cutter with four spare blades
Hooked blade for LEISTER-cutter
(10 dispensers with 10 pcs=100 pcs)
Straight-edge blade for LEISTER-cutter
(10 dispensers with 10 pcs = 100 pcs)
Inside corner tool
Plastfix
Scraper blade
Contour scraper
Storage case for TRIAC AT,
TRIAC ST, ELECTRON ST
More at the new accessories catalog at
35
104.297 A
104.298 A
104.313 A
104.308 A
106.654 C
106.642 A
104.304 A
104.303 A
107.036
A
107.037
A
107.040
C
104.283 A
104.294 A
104.284 B
104.299 B
106.650 C
104.300 A
161.612 D
104.287 A
104.301 A
104.288 B
126.356 C
161.611 D
104.296 A
104.278 A
106.641 A
104.280 B
104.279 B
104.302 A
104.295 A
113.587 A
107.027 C
3.7
5.7
5
7
28
4
Hot
-Air
Han
d T
ools
Welding rods
Article
Pro
file
Colo
ur
lbs
Welding accessories div.
PA welding rod 6.6
PC welding rod 6.6
PC welding rod / ABS / ALPHA (Honda) 6.6
PUR welding rod 6.6
Xenoy welding band 4.4
PPs welding rod, flame resistant 6.6
PVDF welding rod 6.6
POM welding rod 6.6
Test bundles
Test bundle bodywork welding rods, each consisting of
profile A pieces of 14.6" single marked
6x HDPE, 6x PP, 6x PA, 6x PC, 6x ABS, 6x PCABS / APLHA Honda,
6x PC / PBTP / Xenoy
Test bundles standard each consisting of
profile A pieces of 14.6"single marked
5x PVC-U, 5x PVC-P, 5x PP, 5x ABS, 5x HDPE, 3x PC, 3x PA,
3x POM, 3x LDPE, 3x PC / ABS / ALPHA Honda,
3x PC / PBTP / Xenoy
Test bundle welding band each consisting of
profile A pieces of 14.6" single marked
9x HDPE, 8x 0.08’’ white, 9x PP, 8x 0.08’’ natural, 9x ABS,
8x 0.08’’ white, 9x PC / PBTP / Xenoy grey
ArticleP
rofil
e
Colo
ur
lbs
Welding accessories PE
HDPE welding rod 6.6
HDPE welding rod 6.6
HDPE welding rod 11
HDPE welding rod 11
HDPE welding band 2.2
LDPE welding rod 6.6
HDPE welding rod 4.4
Welding accessories PP
PP welding rod 6.6
PP welding rod 6.6
PP welding rod 11
PP welding band 4.4
PP welding rod 4.4
Welding accessories PVC
PVC-U welding rod (hard) 6.6
PVC-U welding rod (hard) 6.6
PVC-U welding rod 6.6
PVC-U welding rod (hard) 11
PVC-U welding rod (hard) 11
PVC-P welding rod (soft) 6.6
Welding accessories ABS
ABS welding rod 6.6
ABS welding rod 6.6
ABS welding band 2.2
0.20.15
0.22 0.28
Profile sizesDimensions in inches
Profile A Profile B Profile C Profile D
0.08
0.3
37
38
39 - 41
42 / 43
45
46
47
12 – 15
13 – 15
16 / 17
18 / 19
34 / 35
Roo
fing
Roofing
Roofing welders overview
UNIROOF AT/ST
VARIMAT V2
TRIAC DRIVE AT
BITUMAT B2
EXAMO / Testing instrument
Hot Air Tools for Roofing
TRIAC ST
TRIAC AT
ELECTRON ST
HOT JET S
General accessories
Aldi logistics center, 50,000m2 TPO Membrane, Switzerland
Exploration Place First, Wichita, USA
Schöni transport Centre, Switzerland
38 www.leister.com
VARIMAT V2
VARIMAT S
39-41 42/43 45 46
Overview Roofing Welders
Flameless welding of modified bitumen with the BITUMAT B2.Simple operation in combination with high welding
performance.
Materials Thermoplastic Single-Ply Membranes ModifiedBitumen
Type of welding machine UNIROOF AT/ST VARIMAT V2 TRIAC DRIVE STwith guide BITUMAT B2
Main application
Parapets, edges, and
small-scale commercial or
residential projects
< 600 yd2
Overlap welding in commer-
cial and industrial projects
> 600 yd2
Cramped conditions, vertical
parapets, round welds (for
ventilation pipes)
First bitumen layer
Roof constructionFlat roof
Sloped roof
Basic weld seams
Detail work
Thickness of membrane up to 0.07 inch up to 0.08 up to 0.07 inch up to 0.24 inch
Special features Ideal for roof edge weldingDouble welding performance
against competitorsVertical welding Flameless welding
Parapet spacing in inches 3.9 4.3 1.6 7.9
Generator operation At least 6 kW to supply a
hot air hand tool
At least 10 kW to supply a
hot air hand tool
Electronics Regulated for drive and blowers (closed-loop system) X X
Controlled for drive and blowers (open loop)UNIROOF ST - closed-loop
(drive)X X
Speed ft/min.Drive speed 3 – 33 2.3 – 39 2.6 – 19.7 2.7 - 40
Welding speed (depending on material) 5.2 – 9.8 13 – 26 4.9 – 9.8 9.8 – 19.6
Weight in lbs 39 77 9 88
Blower technology Brushless Brushless Brush motor Brush motor
Catalog page
= Highly suitable, = Suitable, = Limited suitability
39
3
6
5
21
4
5
1
2
3
4
5
6
Roo
fing
UNIROOF AT / ST: Welding close to the edge made easy.
The UNIROOF AT/ST automatic welder is your flexible partner for welding thermoplastic roof membranes
on flat or pitched roofs (up to 30°). Thanks to its ultra slim design and movable transport axle, users now can
effortlessly weld close to the edge (to 100 mm/4 inches) and at, or on, the parapet, without having to modify their
machine. Additionally, this design permits navigating in narrow spaces and welding beneath and around obstacles.
Hot-air welder
UNIROOF AT / ST
No modifications necessary: Close edge welding right out of the box. The ultra slim roof welding machine
with its movable transport axle
masters close edge welding (4 inches)
at, or on, the parapet, and wherever it
gets narrow.
UNIROOF provides elaborate ergonomic handling thanks to steering bar and handle: Roll or
carry the UNIROOF whenever,
wherever you want to, it’s so handy!
UNIROOF AT: The closed-loop technology—drive motor,
temperature and air blower—keeps
the welding parameters at a constant
level and thus delivers reliably
leakproof results – a clear asset when
it comes to process reliability and
investment safety.
UNIROOF AT: Functional control panel with display for welding
parameters (set point and actual
figures during runtime) as well as
voltage for better control. Save time
with programmable welding profiles
for common roof membranes.
UNIROOF ST for purists: Closed-loop
controlled drive motor with open-loop technology for the control of
temperature and air blower. Simple
control (regulation) with potentiometer/
rotary knobs.
Optimum overall performance and easy-to-operate: The direct-driven,
maintenance-free pressure wheel
[brushless drive motor integrated
into pressure wheel] leads to higher
contact pressure, welding speed and
thus causes zero chain wear.
40 www.leister.com
Hot-air welder
UNIROOF AT
Technical Data UNIROOF AT
Voltage V~ 100 / 120 / 220 – 240
Frequenz Hz 50/60
Power W 1500 / 1800 / 3450
Temperature, stepless °F 210 – 1148
Air flow range % 45 – 100
Drive speed, stepless ft/min 3.3 – 33.0
Size (L × W × H) inches 19 × 10 × 10
Weight lbs 39 (incl. 3 additional weights)
Materials PP, PVC, TPO, ECB, EPDM, EVA, FPO,
PO, PIB (other materials upon request)
Conformity mark
Protection class I
Fan Maintenance-free
Operation Digital with display
Temperature control Closed-loop System
Article No.: 153.599 UNIROOF AT, 120 V / 1800 W, 40 mm (1.6 inch), with US-plug
154.453 UNIROOF AT, 220 – 240 V / 3450 W, 40 mm (1.6 inch), US without plug
Technical Data UNIROOF ST
Voltage V~ 100 / 120 / 220 – 240
Frequenz Hz 50/60
Power W 1500 / 1800 / 3450
Temperature, stepless °F 210 – 1148
Air flow range % 45 – 100
Drive speed, stepless ft/min 3.3 – 33.0
Size (L × W × H) inches 19 × 10 × 10
Weight lbs 39 (incl. 3 additional weights)
Materials PP, PVC, TPO, ECB, EPDM, EVA, FPO,
PO, PIB (other materials upon request)
Conformity mark
Protection class I
Fan Brush motor
Operation Potentiometer
Temperature control Open-loop System
Article No.: 153.601 UNIROOF ST, 120 V / 1800 W, 40 mm (1.6 inch), with US-plug
154.454 UNIROOF ST, 220 – 240 V / 3450 W, 40 mm (1.6 inch), US without plug
Hot-air welder
UNIROOF ST
• No retooling, thanks to movable transportation axle
• Maintenance-free direct drive and closed-loop technology
• Ergonomic handling, flexible relocating and optimal
machine guiding
• 66% higher welding performance compared to similar machines
• No retooling, thanks to movable transportation axle
• Maintenance-free direct drive and open-loop technology
• Ergonomic handling, flexible relocating and optimal
machine guiding
• 38% higher welding performance compared to similar machines
Thanks to its ultra slim design, the UNIROOF welds effortlessly
even in areas which are narrow and difficult to access.
With the addition of the newest accessory axle, users
can now perform radius welds on details such as
pipe boots. Available in either 120V or 230V versions,
the UNIROOF has become one of the industry’s most
versatile welders.
41
155.414
155.325
149.597
152.742
152.741
154.462
132.429
138.817
154.522
152.706
154.827
155.577
137.843
108.129
156.446
155.473153.947154.231145.604
Roo
fing
Accessories UNIROOF AT / ST
Roof structure profile kit
not available in USA
Grip-nozzle 1.6 inch (40 mm)
spring plate
Additional weight, front
Additional weight, lateral
Nozzle calibration device
Welding plates (2) for optimum
welding start
Steelbrush to clean nozzle
Transportation axle 11.8 inch
Transportation axle 8.7 inch for radius
welding
Storage case UNI
Locking plate for additional weights
T-shaped guide bar
T-shaped guide bar, upper part
UNIROOF AT/ST 3.15 inch (80 mm)
bitumen kit
Heating element 230 V / 3300 W
Heating element 120 V / 1800 W
Heating element 100 V / 1500 W
Heating element 120 V / 2300 W*
*Suitable for undervoltage so that set
temperature can be reached
Versatile, easy to maintain, efficient.
42 www.leister.com
1
2
3
4
5
Currently 2.5 m/min. New: 5 m/min. (VARIMAT V2)
Speed
Co
sts
Euro
6000
Euro
3000
Economic efficiency
Costs
50 %Savings
100 %higher Speed
• Patented spherical roller compensates for uneven substrates
• Guide bar for ergonomic handling
• Maintenance-free blower means lower service costs
• User-friendly display with “e-Drive” (press and turn control)
to recall presets and saved weld settings
• Constant drive with regulated electronics
• Process reliability: Auto shut-off if excessive undervoltage is
detected
Hot-air welder
VARIMAT V2
VARIMAT V2: Fast and dependable.Using the VARIMAT V2, polymer roofing mem-
branes can be welded more rapidly resulting in lower
cost. Users appreciate its streamlined ergonomics and its
ease of use. The clearly laid out operating unit's “e-Drive”
allows for the control of all relevant weld parameters.
Achieve consistent, reproducible welding results with the
VARIMAT V2.
Technical data
Voltage V~ 230
Power W 4600
Temperature °F 212 – 1148
Drive speed, stepless ft/min 2.3 – 39
Air flow range % 50 – 100
Width of welding nozzle inches 1.6
Size (L × W × H) inches 25 × 17 × 13
Weight lbs 77
Conformity mark
Protection class I
Article No.: 138.982 VARIMAT V2, 230 V / 4600 W, without plug, storage case
Additional versions available upon request.
Ergonomic: Height and angle of
guide-bar easily can be adjusted
Maintenance-free: High performance
and brushless blower motor, no
brushes to change
Intuitive: Protected design. Easy-
to-view display with “e-drive” and
easy-to-store weld settings
Weld seam control: The green air
dam belt keeps the hot air in the
weld seam.
High speed: New welding nozzle with
protected design for reliable welding
quality
More stability:The patented pressure roller smoothes
out any unevenness
43
143.179
116.323
143.163
108.923
108.924
108.925
108.927
108.928
115.892
159.408
113.995
113.600
110.805
107.067
139.048
107.649
132.429
138.817
146.514
143.162
119.111
151.530
107.612
107.613
Roo
fing
Accessories VARIMAT V2
1.2" (30 mm) grip-nozzle for
TPO / FPO single plies
1.6" (40 mm) grip-nozzle for
TPO / FPO single plies
1.6" (40 mm) Speed overlap welding
nozzle
Additional weight for even
more pressure
Termination weight, complete
Sturdy green plywood storage case
28 × 18.5 × 18 inches
included with purchase
Replacement wheels
2 welding plates for optimum
welding start
included with purchase
Steel brush to clean nozzle
Included with purchase
Replacement silicone rubber roller ø
62/82 x 51 50 +/- 5 Shore
Gentle pressure roller for difficult
ground conditions
Chuck cone for replacing silicone
pressure roller
Mirror welding kit, nozzle right,
for special welding applications
Heating elements
230 V / 4400 W
Complete set with rake nozzle,
1.57 inch and pressure roller, soft,
1.57 inch
Rake nozzle to solve the problems
caused by bubbles forming on
hard surfaces.
Rake nozzle, 1.57 inch
Pressure roller, soft, 1.57 inch
(silicone only)
Welding unit, bitumen-kit 3.15 inch (80
mm), 230 V
Welding unit, bitumen-kit 3.94 inch
(100 mm), 230 V
Welding unit, bitumen-kit 4.72 inch
(120 mm), 230 V
Welding unit, bitumen-kit 3.94 inch,
400 V / 6100 W
Welding unit, bitumen-kit 4.72 inch,
400 V / 6100 W
Welding unit, bitumen-kit 3.15 inch,
400 V / 6100 W
Nozzle positioning gauge VARIMAT V2
Superior weld quality, enhanced by the patented pressure roller.Proven performance and reliability.
107.065
138.460
100.985
45
115.274115.176115.712115.857115.921
115.276107.552
138.570
115.283115.279115.281115.699115.701115.703
115.282115.278 115.280115.700115.702
138.549
142.422
142.413
108.985
142.717
Roo
fing
TRIAC DRIVE ST: The all-purpose hot-air tool.
The unique, semi-automatic welding tool. The flexible concept makes the TRIAC DRIVE ST an all-around tool that
is universal in use.
• More consistent and up to three times faster than manual
welding
• Unique semi-automatic welding tool
• Automatic welding in areas inaccessible to other tools
• With welding guide, and inside or outside nozzle, the unit
is suitable for all roofing applications and other areas of use
Semi-automatic hot-air tool
TRIAC DRIVE ST Accessories TRIAC DRIVE ST
0.5" (12 mm) pressure roller, steel
1.2" (30 mm) pressure roller, steel
1.6" (40 mm) pressure roller, steel
1.2" (30 mm) pressure roller, silicone
1.6" (40 mm) pressure roller, silicone
Support carrier single, brass
Support carrier duplex, Silicon
Single supporting wheel, brass
Transport roller 05" (12 mm), silicone
Overlap welding nozzle,
inside, push-fit
0.5" (12 mm), with grip
1.2" (30 mm), with grip
1.5" (38 mm) with grip
0.5" (12 mm), without grip
1.2" (30 mm), without grip
1.5" (38 mm), without grip
Overlap welding nozzle, outside,
push-fit
0.5" (12 mm), with grip
1.2" (30 mm), with grip
1.5" (38 mm), with grip
1.2" (30 mm), without grip
1.5" (38 mm), without grip
Guide for TRIAC DRIVE ST, for easy
horizontal welding, e.g. for parapets.
(Included with purchase: 1.6" (40 mm)
overlap welding nozzle, inside, push-fit)
115.700 Overlap welding nozzle, out-
side, push-fit, 1.2" (30 mm), without
grip (included with purchase)
Guide with extension for parapet
Extension bar for extension on parapet
Storage case
(included with purchase)
Heating element, 230 V / 1550 W,
for TRIAC AT
Heating element, 120 V / 1550 W,
for TRIAC ST142.718
114.682
Technical data
Voltage V~ 120 / 230
Power W 1600 / 1700
Temperature °F 104 – 1202
Drive speed ft/min 1.6 – 9.8
Size (L × W × H) inches 12 × 9 × 15
Weight (with 10 ft cable) lbs 9
Conformity mark
Protection class II
Article No.: 115.379 TRIAC DRIVE ST without guide, 100-120 V 1600 W, inside nozzle,
without grip, 1.6" (40 mm), knurled steel wheels, brass rollers
115.125 TRIAC DRIVE ST without guide, 100-120 V 1600 W, outside nozzle,
without grip, 1.6" (40 mm), knurled steel wheels, brass rollers
Additional versions available upon request.
46 www.leister.com
138.048
138.047
137.895137.896140.229140.228156.447158.222
140.476
155.328
140.489
126.594
126.386
• Flameless welding of modified bitumen
• No shrinking of the insulation due to integrated air dam
• Uniform welding results
• High working speed
• Requires only one user to efficiently weld seams
(torch welding requires two)
Hot-air welder
BITUMAT B2 Accessories BITUMAT B2
BITUMAT B2: The flameless.
Welding of modified bitumen (SBS, APP) with the
flameless BITUMAT B2 is much safer than welding
with an open flame. The weld strength is significantly
better and the single-step process makes welding
more economical.
Considerably better welding results when compared with open
flame tools. No damage to insulating material due to integrated
air dam.
Open flame
BITUMAT B2
Easy unit guidance and clean working with the BITUMAT B2.
3" (75 mm) bitumen nozzle
4" (100 mm) bitumen nozzle
4" (100 mm) pressure roller with gap
3" (75 mm) pressure roller with gap
4" (100 mm) pressure roller w/out gap
3" (75 mm) pressure roller w/out gap
3.1" (80 mm) silicon pressure roller
4" (100 mm) silicon pressure roller
Lifting device
BITUMAT B2 4.7 inch (120 mm)
bitumen kit
Sturdy storage case,
28 × 18 × 18 inches
(included with purchase)
Heating elements
230 V / 6500 W126.386
Technical data
Voltage V~ 230
Power W 6700
Temperature °F 68 – 1148
Drive speed ft/min 2.7 – 40
Air flow range % 85 – 100
Welding nozzle width inches 3.0 / 4.0 / 4.7
Size (L × W × H) inches 27.2 × 19.3 × 13.0
Weight lbs 89 (with cable)
Conformity mark
Approval mark
Protection class I
Article No.: 140.441 BITUMAT B2, 230V / 6700W, 3" (75 mm), without plug
140.439 BITUMAT B2, 230V / 6700W, 4" (100 mm), without plug
Additional versions available upon request.
47
134.832
144.416
Welder Set Temperature (C)
Welding Speed (m/min)
Roo
fing
Testing instrument
EXAMO USB
• Handy, robust and reliable
• Testing of elongation, peak force, tear force, test speed
and position
• Construction-site approved
Testing a weld seam with the EXAMO USB.
EXAMO USB: The inspector.
Is the welding seam sealed and can it withstand the
specified peel, tensile and shear forces? EXAMO
performs tests at the construction site – quickly, reliably
and easily.
Accessory EXAMO USB
Testing and calibration kit
To test and calibrate your EXAMO USB
USB memory stick
Technical Data
Type 300F 600F
Voltage V~ 230 230
Power W 200 200
Tensile load N 4000 4000
Range inches 11.8 23.6
Test speed inches/min 0.8 – 21.6 0.8 – 21.6
Sample thickness mil max. 276 max. 276
Sample width inchesmax. 1.6
(2.4 optional)
max. 1.6
(2.4 optional)
Size (L × W × H) inches29 × 11 × 7
(storage case)
41 × 11 × 7
(storage case)
Weight lbs 30.8 38.6
Conformity mark
Approval mark
Protection class I
Article No.:139.059 EXAMO 300F USB, 230 V / 200 W, incl. USB memory stick, Euro plug
139.060 EXAMO 600F USB, 230 V / 200 W, incl. USB memory stick, Euro plug
Leister offers a service to create a welding window. It is import-
ant to have the correct starting parameters, particularly when
working with new or unfamiliar membrane.
Article No.: 153.026 VACUUM BELL 13"
(320 mm)
153.025 VACUUM PUMP 120V
153.024 VACUUM PUMP 230V
Typical welding windows for TPO and PVC
For testing T-joints
49
50 / 51
52 / 53
54 / 55
56 / 57 / 60
58 - 60
62 / 63
63
64
65
66
12 – 15
13 – 15
18 / 19
20 / 21
34 / 35 Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
Technical Textiles & Industrial Fabrics
Product overview: Hot-air welders
HEMTEK ST
HEMTEK K-ST
SEAMTEK 900 AT
SEAMTEK W-900 AT
VARIANT T1
VARIANT T1 Overlap
VARIANT T1 TAPE
UNIPLAN E / UNIPLAN S
TAPEMAT / TAPEMAT SPRIEGEL
Hot-Air Hand Tools
TRIAC ST
TRIAC AT
HOT JET S
GHIBLI AW
General accessories
Truck covers
Awnings
Flood protection
50 www.leister.com
52 / 53 54 / 55 56 / 57 / 60 58 - 60
Device type HEMTEK ST HEMTEK K-ST SEAMTEK 900 ATSEAMTEK W-900 AT
Max. voltage V~ 120 / 230 120 / 130 230 / 240 230 / 240
Max. power W 1800 / 2350 / 3450 1800 / 2350 4500 3900
Temperature °F 212 - 1202 212 - 1202 248 - 1292 0 - 1256
Speed ft/min 2.6 - 39 2.6 - 39 0.3 - 98 0 - 98
Welding width in inches 0.8 / 1.2 / 1.6 0.3 0.3 - 2.5 0.3 - 2.5
Size (L × W × H) in inches 17 × 14 × 24 17 × 14 × 24 59 × 28 × 59 67 × 28 × 59
Weight lbs 60.0 60.0 591.0 525.0
Welding options
Overlap welds
Hem welds
Hems with rope
Tape welds
Prayer welds
Pole pockets
Butt joint with tape
Welding technologies
Hot-air welding
Hot-wedge welding
Features
Temperature regulation
Drive regulation
Temperature and drive
infinitely adjustable
Digital display
Catalog page
Stationary welding machine
Billboards
51
62 / 63 64 64 65 66 66
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
Device typeVARIANT T1
OverlapVARIANT T1 TAPE
2.0”VARIANT T1 TAPE
1.0”UNIPLAN E / S
TAPEMAT2.0”
TAPEMAT SPRIEGEL
4 / 5”
Max. voltage V~ 230 / 400 230 / 400 230 / 400 120 3 × 400 3 × 400
Max. power W 3680 / 5700 3680 / 5700 3680 / 5700 2300 10 000 10 000
Temperature °F 212 –1148 212 –1148 212 –1148 176 – 1148 212 – 1200 212 – 1200
Speed ft/min 5 – 59 5 – 59 5 – 59 3 – 25 13 – 66 13 – 66
Welding width in inches 0.8 / 1.6 2.0 1.0 0.8 / 1.2 2.0 2 × 0.8
Size (L × W × H) in inches 28 × 16 × 10 28 × 16 × 10 28 × 16 × 10 17 × 11 × 8 22 × 17 × 15 22 × 17 × 15
Weight in lbs 50 62 62 25 77 88
Conformity mark
Certification scheme CCA CCA CCA CCA CCA CCA
Protection class
Welding options
Overlap welds
Hem welds
Hems with rope
Tape welds
Prayer welds
Pole Pockets
Welding technologies
Hot-air welding
Hot-wedge welding
Features
Temperature regulation
Drive regulation
Temperature and drive
infinitely adjustable
Digital display
Catalog page
Product overview hot-air welders for Technical Textiles & Industrial Fabrics
Tents
52 www.leister.com
2
4
5
1
3
2
5 3
1
2
3
4
5
HEMTEK ST: Hem welding has never been so easy and affordable.
The HEMTEK ST is designed for a wide range of applications and is particularly intuitive to use. Once the machine
is mounted, you can start welding immediately. Preparing or finishing with hot-air hand tools is no longer necessary.
From now on, you quickly can weld promotional banners or tarpaulins from corner-to-corner with ease.
Hot-air Welding machine
HEMTEK ST
3-in1 hem guide: Included with the machine is an
easily-adjustable hem guide. No tools
necessary. The hem guide can be
adjusted for: Hems of 0.8, 1.2 and
1.6 inches (20, 30 and 40 mm); Pole
pockets up to four (4) inches; Hems
with rope.
Table clamp: Whether sitting or standing, the
HEMTEK ST can be used at almost
any work table. The freely-adjustable
quick-clamp lock enables the user to
mount the machine quickly and easily
onto almost any work table.
Control panel: The intuitive and centrally-located
control panel allows users to easily
adjust the necessary parameters
(temperature, speed and air flow) or
select cooldown mode to gently cool
the machine when the user is done
for the day.
Hands-free operation: The HEMTEK ST is operated with a
foot pedal leaving the user’s hands
free to guide the material through
the machine.
Pressure roller: Thanks to the integrated weight, pres-
sure can be adjusted easily. The roller
incorporates high contact pressure
with an intelligent system. Various
nozzle widths and rollers for specific
applications are available.
53
157.048157.047108.117
157.070157.071161.202
157.707157.706157.705
157.098
156.472
157.879
155.800
159.780
160.269
153.947149.675155.473
157.540
116.798
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
Hot-air welding machine
HEMTEK ST • Welding speeds of up to 39 feet per minute
• Very strong blower
• Tool-free setting of the hem guide
• One hem guide, three applications: Hems: 0.8/1.2/1.6 inches;
Pole pockets: up to 4 inches; Hems with rope
• Easy-to-use: Thanks to the foot pedal, your hands are free to
guide the material
• Everything in a single step: No need to weld with hot-air hand
tools afterwards
• All welding parameters are adjustable
• Cooldown mode
• Can be mounted onto almost any table: freely-adjustable,
quick-clamp lock
Whether sitting or standing, the HEMTEK ST can be used at
almost any work table.
Accessories HEMTEK ST
Thanks to the foot pedal, both hands are free to guide
the material. High weld quality and stress-free welding
experience guaranteed.
Technical data
120 V 230 VVoltage V~ 120 230 230
Frequency Hz 50 / 60 50 / 60 50 / 60
Power W 1800 3450 2350
Temperature, stepless °F 212 – 1202
Air quantity, stepless 1 – 10
Drive, stepless ft./min. 2.6 – 39
Welding width in. 0.8 / 1.2 / 1.6 1.2 / 1.6 0.8
Emission LpA (dB) 70 (K = 3 dB)
Size (L × W × H) in. 17 × 14 × 24
Weight lbs. 60 (Including table mount)
Conformity mark
Protection class I
Included with purchase:Hot-air welder, table mount, hem guide, scraper, silicone stopper, operating
instructions, general catalog, folder
Article No.: 157.871 HEMTEK ST, 120 V / 1800 W, 0.8 inch, US-plug
157.870 HEMTEK ST, 120 V / 1800 W, 1.2 inches, US-plug
157.869 HEMTEK ST, 120 V / 1800 W, 1.6 inches, US-plug
Pressure roller, top
0.8 inch
1.2 inch
1.6 inch
Pressure roller, bottom
0.8 inch
1.2 inch
1.6 inch
Nozzle
0.8 inch
1.2 inch
1.6 inch
Nozzle adjustment gauge
Adjustable hemming/piping guide
Adjustable hemming/piping guide for
heavy materials
Overlap guide
Tape welding guide
Contact pressure weight large
Heating elements
120 V / 1800 W (0.8 / 1.2 / 1.6 inch)
230 V / 2200 W (0.8 inch)
230 V /3300 W (1.2 /1.6 inch)
Silicone stopper
Brass brush
54 www.leister.com
1
2
3
4
1
4
3
22
HEMTEK K-ST: Piping creation made easy
Based on your individual needs, you can produce your own piping with the HEMTEK K-ST. Because the HEMTEK K-ST is
extremely flexible, you can react even faster to specific customer inquiries. The easy-to-use, infinitely-adjustable guide enables
process-reliable piping creation with different lug widths. The foot pedal means you have both hands free and can use them to
guide the material. This allows you to concentrate fully on the welding process.
Hot-air welder
HEMTEK K-ST
Piping guide: Process-secure, easy guidance of the
piping cord up to 13mm for optimum
results.
Control panel: The intuitive control
unit guarantees a stress-free welding
experience. The temperature and
speed can be adjusted easily. The
integrated cool-down mode gently
cools the machine.
Table clamp:
The quick-clamp lock enables you to
mount the machine quickly and easily
onto any work table.
Foot pedal: The HEMTEK K-ST can
be operated comfortably with the foot
pedal so both hands are free to guide
the material.
55
163.796
161.202
161.259
163.798
160.749
149.675
116.798
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
Hot-air welder
HEMTEK K-ST • Piping creation made easy • Lug width infinitely adjustable • Piping diameter 0.12-0.51 inch • Up to 3.1 yards/min • Quick and easy installation of the machine • Thanks to the foot pedal, you can use both hands to guide
the material and piping. High welding quality and a stress- free welding experience are guaranteed.
You can operate the HEMTEK K-ST at any work table – sitting or standing.
AccessoriesModification kit K-ST
Pressure roller below 1.57 inch
Flap-piping nozzle 0.3 inch
Nozzle adjustment gauge
Double flap-piping guide
Heating element 230 V / 2200 W
Brass brush
Piping kits for converting HEMTEK ST to HEMTEK K-STExisting Required for HEMTEK K-ST (piping production)
HEMTEK ST Modification kit K-ST163.796
Pressure roller below161.202
Heating element 230 V / 2200 W149.675
157.862 0.79 inch EU plug • •
157.861 1.18 inch EU plug • • •
157.860 1.57 inch EU plug • •
157.868 0.79 inch UK plug • •
157.867 1.18 inch UK plug • • •
157.866 1.57 inch UK plug • •
157.871 0.79 inch US plug • •
157.870 1.18 inch US plug • •
157.869 1.57 inch US plug •
Technical Data
120 V 220 – 240 VVoltage V~ 120 230
Frequency Hz 50 / 60 50 / 60
Power W 1800 2350
Temperature, stepless °F 212 – 1202
Drive, stepless inch/min 31.5 – 47.2
Welding seam width inch 0.3
Emission LpA (dB) 70 (K = 3 dB)
Size (L × B × H) inch 17.0 × 13.8 × 23.6
Weight lbs 59.5 (including table fastening)
Conformity mark
Protection class I
Scope of delivery:Hot-air welder, table fastening console, flap piping guide, operating instructions, main catalog, folder
Article no. 162.499 HEMTEK K-ST, 230 V / 2350 W, EU plug162.605 HEMTEK K-ST, 120 V / 1800 W, US plug
56 www.leister.com
1
2
3
4
5
6
3
4
5
6
1
2
Leister SEAMTEK 900 AT
SEAMTEK 900 AT: New Generation
The intelligent construction of the SEAMTEK 900 AT makes practically any welding application possible. Thanks
to the well-thought-out multi-arm system, the machine can be set to a specific configuration for the application in
record time. The huge selection of various drive wheels, nozzles and guides guarantees maximum flexibility. The
intuitive operation of the user interface takes place entirely via touchscreen and permits simple adjustment of the
regulated parameters.
Intuitive• All parameters can be modified via
touchscreen
• Complete regulation of all param-
eters
Application-friendly• Tool-free nozzle adjustment
• Rapid wheel replacement
Pedestal• Overlap welding
• Hem and piping welding
• 3D / Inflatable welding
• Strip welding
Quickarm• Endless welding of pipes and hoses
• Overlap welding
Sidearm• Circumference welding
• Tape welding
• Sealing of end caps
Tape delivery system• Application of seam sealing tape
• Welding of reinforcement tape
• Welding of hot melt adhesive tape
57
155.392155.393155.863154.593155.864155.394155.865154.619
157.808157.799151.598151.601151.597151.608151.599151.850151.600
152.941
152.956
60
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
• Multi-arm system guarantees great flexibility
• Digitally-regulated welding parameters
• Intuitive user interface
• Quiet operation
• Test mode for rapid parameter determination
• Drive wheels and guides can be quickly changed
• Maintenance-free and durable
Easy, economical and safe welding.
Welding machine
SEAMTEK 900 AT
Wheel, Steel, 2.5 inch
0.3” (8 mm)
0.5” (13 mm)
0.75” (19 mm)
1” (25 mm)
1.5“ (38 mm)
2” (50 mm)
2.24” (57 mm)
2.5” (64 mm)
SEAMTEK Nozzle
0.30” (8 mm) Low Flow
0.50” (13 mm) Low Flow
0.50” (13 mm)
0.75” (19 mm)
1.0” (25 mm)
1.5” (38 mm)
2.0” (50 mm)
2.16” (55 mm)
2.5” (64 mm)
Closing nozzle with angle
Hem nozzle
SEAMTEK 2000 AT (2, 2 yards frame) available, delivery time on
request.
Technical data
Voltage V~ 230 / 240
Power W 4500
Temperature °F 248 – 1292
Speed ft/min 0.3 – 98
Size (L × W × H) inches 59 × 28 × 59
Weight lbs524 Base
590 Fully loaded
Required air pressure psi 90
Welding seam width inches 0.3 – 2.5 (8 – 64 mm)
Article No.: 155.555 SEAMTEK 900 AT Base version with pedestal, 2 steel pressure rollers
25 mm, standard nozzle 25 mm
155.777 Quick arm
155.666 Side arm
155.888 Tape Delivery System (TDS)
156.314 Transport Box
Accessories SEAMTEK 900 AT
General accessories
58 www.leister.com
1
2
3
4
5
Innovation• Changeable speed during welding
process like a sewing machine
• Automatic temperature adjustment
according to your speed
• High efficiency, up to 680°C
Save a lot of money• Nearly no energy consumption while in
stand-by mode
• Far less energy consumption than
comparable machines
• Affordable replacement wedges
Ready in a few seconds• No pre-heat needed
• Wedge heats up instantaneously after
starting the welding
Safe and simple• Slow down the speed for difficult
product sections
• Once disengaged (or in stand-by
mode), the wedge cools immediately
and reduces any risk of burning
Great seam results• Get flat and precise seams, even when
welding curves
• Weld sensitive materials easily without
waves and wrinkles
Based on the proven SEAMTEK W-900AT is this the first machine worldwide with this new and innovative low
voltage wedge technology. With the genuine innovation of variable speed during welding process, this machine
will change your welding experience. Weld the best possible, highest quality seams. Meet the world champion in
efficiency.
SEAMTEK W-900 AT: Variable speed for maximum efficiency
Leister SEAMTEK W-900 AT
59
162.854162.847162.846162.700162.809162.818162.829162.837
163.172163.173163.174163.175163.176163.177163.178163.179
60
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
New, innovative welding wedge solution.
Welding machine
SEAMTEK W-900 AT
Technical data
Voltage V~ 230 / 240
Power W 900
Temperature °F 0 - 1256
Speed ft/min 0 – 98
Size (L × W × H) inches 67 × 28 × 59
Weight lbs 525
Welding seam width inches 0.3 – 2.5 (8 – 64 mm)
Article No.: 159.159 SEAMTEK W-900 AT with pedestal and a power supply
(without welding rollers and wedge adapter)
155.777 Quick arm
155.888 Tape Delivery System (TDS)
3D wedge bracket
0.30” (8 mm)
0.5” (13 mm)
0.75” (19 mm)
1” (25 mm)
1.5“ (38 mm)
2” (50 mm)
2.24” (57 mm)
2.5” (64 mm)
HS wedge bracket
0.30” (8 mm)
0.5” (13 mm)
0.75” (19 mm)
1” (25 mm)
1.5“ (38 mm)
2” (50 mm)
2.24” (57 mm)
2.5” (64 mm)
Inflatables (picture © Marek Uliasz | Dreamstime.com)
Accessories SEAMTEK W-900 AT
• Quick change fastener for changing welding widths
• Multi-arm system with pedestal and quick arm
• Welding parameters digitally regulated
• Intuitive user interface
• Practically silent
• Compressed air connection not required
General accessories
60 www.leister.com
155.401155.402155.403155.404155.405155.406155.407
155.660
155.530
155.760
155.380
155.540
156.760
156.770
155.400
156.780
155.410
158.789
158.928
159.389
Wheel, Silicone, 50A, 2.5 inch
0.5” (13 mm)
0.75” (19 mm)
1” (25 mm)
1.5” (38 mm)
2” (50 mm)
2.24” (57 mm)
2.5” (64 mm)
Adjustable overlap guide, 0 - 2.5”
(0 - 64 mm)
Adjustable hem-/ piping guide 0 - 2.0”
(0 - 50 mm)
Adjustable hem / piping guide
0 - 2.36” (0 - 60 mm), for heavy
materials
Open Hem/Pocket Guide up to
4.33” (110 mm)
Modular 3D guide
Overlap guide from the left
Adjustable acrylic tape guide
Guide holder
Overlap guide for quick arm
Connection adapter for fume extraction
Tape cutting unit 0.7 x 1”
(18 - 25 mm)
Puller unit
Adjustable Pedestal table
Accessories SEAMTEK 900 AT / SEAMTEK W-900 AT
61
62 www.leister.com
6
3
1
5
4
2
1
22
33
1
2
3
1
2
3
4
5
VARIANT T1: Quality, productivity, ergonomic.
The robust VARIANT T1 is very versatile. It is used in various applications for hem, overlap and tape welding. VARI-
ANT T1 convinces with its high working speed, particularly with vehicle tarpaulin production for welding overlap,
reinforcement and anti-vandalism tapes. Thanks to the “e-Drive” operating concept, setting the relevant welding
parameters could not be easier.
User-friendly: Clear display plus "e-Drive" and
storable welding parameters.
Highly flexible:Conversion kits make it possible to
work with different types of tape:
2.0 inch reinforcement and 1.0 inch
anti-vandalism tapes (see image).
Feeding to perfection: The new guide rollers make it easy to
position the material and keep it taut
right up to the final inch.
Dual-action: The pressure roller can easily be
converted from a 2.0 inch width to a
1.0 inch one (anti-vandalism tape) or
vice versa.
Optional: The laser guide keeps the VARIANT T1
TAPE firmly on course.
VARIANT T1 TAPE 2.0 inch
VARIANT T1 TAPE
Economical: Up to 59 ft/min welding speed and
powerful, maintenance-free hot
air blower.
Reliable:Constant, wrinkle-free welds thanks to
process-optimized nozzle.
Hem / piping welding kit: Welding hems, pole pockets and
piping in short time with easy-to-
use accessories.
VARIANT T1
VARIANT T1
63
142.650
142.221141.326140.530
148.961
148.962
160.850
161.297
159.899
139.438
116.798
140.771
141.558
140.429138.938
142.705
107.612107.613
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
• Top welding speed up to 59 ft/min
• Perfect view into the weld seam
• Sturdy and durable for professional use
• Smooth lifting device for precise positioning
• Simple operation due to “e-Drive” operating concept
Hot-air welder
VARIANT T1 Overlap Accessories VARIANT T1 Overlap
Very easy hem and piping welds with the hem /
piping welding kit.
Hem / piping welding kit complete,
comprising:
Hold-down device
Piping roll
Hem / piping add-on part
Conversion kit, VARIANT T1 Overlap
to VARIANT T1 TAPE 1” (25 mm)
Conversion kit, VARIANT T1 Overlap
to VARIANT T1 TAPE 2” (50 mm)
Weight bracket complete
Overlap kit 2” (50 mm)
Impeller adjustable
Additional weight 7.5 lbs
Brass brush
Overlap welding nozzle 0.8” (20 mm)
Overlap welding nozzle 1.6” (40 mm)
1.0” (25 mm) pressure roller complete
1.8” (45 mm) pressure roller complete
Sturdy storage case
Heating elements
230 V
400 V
VARIANT T1: Compact, fast and reliable.
This tool's top welding speed of up to 59 ft/min and its
slim, compact design make it a winning choice.
Technical data
Voltage V~ 230 / 400
Power W 3680 / 5700
Temperature °F 212 –1148
Speed ft/min 5 – 59
Air flow range % 40 – 100
Welding seam width inches 0.8 or 1.6 (20 or 40 mm)
Size (L × W × H) inches 28 x 16 x 10
Weight lbs 50 (without 5 ft cord)
Conformity mark
Protection class I
Article No.: 141.891 VARIANT T1, 230 V / 3680 W, 1.6” (40 mm) nozzle, with Euro plug
141.892 VARIANT T1, 230 V / 3680 W, 0.8” (20 mm) nozzle, with Euro plug
Additional versions available upon request.
64 www.leister.com
149.652
149.653
149.654
149.655
149.100
149.344
139.438
116.798
160.189
107.612107.613
Conversion kit VARIANT T1 TAPE
1” (25 mm) to VARIANT T1 TAPE 2”
(50 mm), 1 nozzle, 4 guide rollers, 1
gauge
Conversion kit VARIANT T1 TAPE
2” (50 mm) to VARIANT T1 TAPE 1”
(25 mm), 1 nozzle, 4 guide rollers, 1
gauge
Conversion kit VARIANT T1 TAPE to
VARIANT T1 Overlap 0.8” (20 mm)
Conversion kit VARIANT T1 TAPE to
VARIANT T1 Overlap 1.6” (40 mm)
Magnetic tool holder
Laser guide
Additional weight 7.5 lbs
Brass brush
Anti-vandal tape
Heating elements
230 V
400 V
Accessories VARIANT T1 TAPE
VARIANT T1 TAPE 1.0 inch,
anti-vandalism
• Fastest, most precise automatic tape welding tool
(up to 59 ft/min)
• "e-Drive" operating unit
• Easy to use
• Taut tape guidance
• Kits for converting VARIANT T1 Overlap to
1.0 or 2.0 inch TAPE
An economical, ergonomic tool for the welding of reinforce-
ment tapes.
Hot-air tape welder
VARIANT T1 TAPE
Technical data
Voltage V~ 230 / 400
Power W 3680 / 5700
Temperature °F 212 – 1148
Air flow range % 40 – 100
Speed ft/min 5 – 59
Welding seam width inches 2.0 or 1.0 (25 or 50 mm)
Size (L × W × H) inches 28 x 16 x 10
Weight lbs 62 (with 5 ft cord)
Conformity mark
Protection class I
Article No.: 148.963 VARIANT T1 TAPE 1” (25 mm), 230 V / 3680 W, with Euro plug
148.964 VARIANT T1 TAPE 2” (50 mm), 230 V / 3680 W, with Euro plug
Additional versions available upon request.
65
UNIPLAN E
115.065
115.066
115.067
115.839
119.933119.934
122.013
122.016
147.836
116.798
126.448
103.604
101.910
Tech
nica
l Tex
tiles
and
In
dus
tria
l Fab
rics
• Small, lightweight and handy
• High welding speed
• Reproducible welding results (UNIPLAN E)
• Handy, robust case included in delivery
• Digital display (UNIPLAN E)
Hot-air welder
UNIPLAN E / UNIPLAN S Accessories UNIPLAN E / UNIPLAN S
The handy partner for precise welding: UNIPLAN E.
UNIPLAN: Just perfect.
The small, lightweight and handy hot-air welder produc-
es perfect welding results. The UNIPLAN E is electroni-
cally controlled for reproducible results.
0.8 inch (20 mm) overlap welding unit
1.2 inch (30 mm) overlap welding unit
Weight with holder
Handle with holder and screws
0.8 inch (20 mm) hem welding kit
1.2 inch (30 mm) hem welding kit
Hem cord welding kit with lifting
(for units built prior to 2003)
Hem cord welding kit without lifting
(for units built from 2004)
Guide bar complete
Brass brush to clean nozzle
Sturdy storage case
included with purchase
120 V / 1800 W heating element,
for UNIPLAN E
120 V / 1800 W heating element,
for UNIPLAN S
103.602
101.913
Technical data
Voltage V~ 120
Power W 1800
Temperature °F 68 – 1148
Speed ft/min 3.3 – 24.6
Air flow range %50 – 100
(for UNIPLAN E steplessly)
Welding seam width inches 0.8 or 1.2 (20 or 30 mm)
Size (L × W × H) inches 17 × 11 × 8
Weight lbs 25 (with 10 ft cord)
Conformity mark
Protection class I
Article No.: 115.044 UNIPLAN E 0.8” (20 mm), 120 V / 1800 W, without plug
115.043 UNIPLAN E 1.2” (30 mm), 120 V / 1800 W, without plug
115.056 UNIPLAN S 1.2” (30 mm), 120 V / 1800 W, without plug
Additional versions available upon request.
66 www.leister.com
138.242
131.690
137.412
135.392
101.991
• High welding speed
• Process-optimized nozzle
• Maintenance-free, brushless blower
• Intuitive operation and simple handling
Welding tape at maximum speed.
TAPEMAT: The power pack.
For rapid, economical strip welding of truck covers and
industrial curtains. Very fast strip welder at up to 66 ft
per minute.
• Top welding speed
• Process-optimized, high-precision nozzle
• Maintenance-free, brushless blower
• Easy to exchange counter-pressure roller
• Constant tarpaulin bow tension
Tape hot-air welder
TAPEMAT
Spriegel hot-air welder
TAPEMAT SPRIEGEL
Lifting device
TAPEMAT
2” (50 mm) welding nozzle
TAPEMAT SPRIEGEL
4” (100 mm) welding nozzle, complete
weld seam 0.8” (20 mm) left and right
5” (125 mm) welding nozzle, complete
weld seam 0.8” (20 mm) left and right
3 × 400 V / 3 × 3300 W
heating element
Accessories TAPEMAT / TAPEMAT SPRIEGEL
Technical data TAPEMATTAPEMAT SPRIEGEL
Voltage V~ 3 × 400 3 × 400
Power kW 10 10
Temperature °F ~ 1200 ~ 1200
Speed ft/min 13 – 66 13 – 66
Welding seam width inches 2 (50 mm) 4 / 5 (100/125mm)
Size (L × W × H) inches 22 × 17 × 15 22 × 17 × 15
Weight lbs 88 88
Conformity mark
Approval mark
Protection class I
Article No.: 129.757 TAPEMAT 2” (50 mm), 400 V / 10 kW, with 16A CEE plug
138.229 TAPEMAT Spriegel 4” (100 mm) 400 V / 10 kW, with 16A CEE plug
133.597 TAPEMAT Spriegel 5” (125 mm), 400 V / 10 kW, with 16A CEE plug
67
69
70
71
72 / 73
74 / 75
76 / 77
78 / 79
81
82
83
84
85 / 86
87
88
89
12 – 15
13 – 15
16 / 17
18 / 19
34 / 35
Civ
il E
ngin
eerin
g /
G
EO
Civil Engineering / Tunneling / Landfills
Product overview: Wedge welders
Product overview: Extrusion welders
GEOSTAR G7 / GEOSTAR G5
GEOSTAR G7 LQS / GEOSTAR G5 LQS
COMET / COMET USB
TWINNY T / TWINNY T USB / TWINNY S
TRIAC DRIVE AT / ST
WELDPLAST S6
WELDPLAST S4
WELDPLAST S2 / S2 TPO
FUSION 3 / FUSION 3C
EXAMO USB
Vacuum test system
Compressed air test system
Hot Air Tools
TRIAC ST
TRIAC AT
ELECTRON ST
HOT JET S
General accessories
Shrimp Farm, HDPE 0.02 inch (.05 mm)
Tunnel, PVC 0.1 inch (2.5 mm)
Water Reservoir, HDPE 0.08 inch (2 mm)
70 www.leister.com
– / – / – / – /
( )
72 - 75 72 - 75 76 / 77 78 / 79 79 81
Product overview wedge welders for Civil Engineering / Tunneling / Landfills
Device type GEOSTAR G5 GEOSTAR G7COMET /
COMET USBTWINNY T /
TWINNY T USBTWINNY S TRIAC DRIVE AT
Voltage V~ 120 / 230 230 120 / 230 230 120 / 230 230
Max. Power W 1800 / 2800 28001800 / 1500 /
12002300 1900 / 2900 1700
Temperature °F 176 – 860 176 – 860 176 – 788 176 – 1040 176 – 1040 176 – 1202
Drive Speed ft/min 2.6 – 39 2.6 – 39 2.6 – 10.5 2.6 – 10.50.7 – 2.5
(13.0/20.01)1.6 – 9.8
Max. Welding pressure N 1500 1500 1000 1000 1000 (500) NA
Weld seam width mm 2 x 15 2 x 15 2 × 15 2 × 15 2 × 15 30
Material thickness mil 30 - 120*² 40 - 120*² 20 – 120 20 – 120 20 – 120 20 – 120
Max. overlap mm 150 150 125 125 125
Data recording
Digital display
Size (L × W × H) inches 19 × 11 × 11 19 × 11 × 11 12 × 10 × 10 13 × 14 × 10 14 × 15 × 11 12 × 9 × 15
Weight lbs 36 39 17 15 – 17 15 – 17 9
Conformity mark
Protection class
Welding technologies
Hot-wedge welding
Combi-wedge welding
Applications
HDPE, LDPE, TPO, FPO, PP 30 - 120 mil*² 40 - 120 mil*² 20 - 100 mil 20 - 100 mil 20 - 10 mil 20 - 80 mil
PVC, CSPE, EIA30 - 120 mil*²
*(steel wedge only)*³
20 - 120 mil
*(steel wedge only)20 - 120 mil 20 - 120 mil 20 - 120 mil
Catalog page
1 For details, see page 79
Attention these are Leister recomendatuions only, depending upon material specifications the possible min. thicknesses may vary.
For more information please contact your Leister Distributor.
* Please note PVC, CSPE and all chlorinated products are only to be welded with steel wedges.
*² Material dependent. Thinner/thicker materals are possible based on the skill level of the operator.
*³ Other configurations and various wedges available upon request.
Possibilities of welding seams
Overlap seam without test channelOverlap seam with test channel
membrane membranetest channel
71
a
s
a
1 1 1 2 2
82 83 84 85 / 86 85 / 86
6.05.54.53.52.51.50.5 5.04.03.02.01.00.0
WELDPLAST S2
WELDPLAST S4
FUSION 3
FUSION 3C
WELDPLAST S6
Civ
il E
ngin
eerin
g /
G
EO
Fillet welding seamOverlap seam
Possible welding seams a = seam size s = material thickness
Product Comparison
Digitally-regulated extrusion weldersAnalog extrusion
welders
Device type WELDPLAST S6 WELDPLAST S4 WELDPLAST S2 FUSION 3 FUSION 3C
Output (HDPE) lbs / hr 8.6 – 13.2 3.3 – 8.8 1.3 – 5.0 3.5 – 7.7 3.5 – 7.7
Material HDPE, PP HDPE, PP HDPE, PP, PVC HDPE, PP HDPE, PP
Wall thickness mm 15 – 40 8 – 35 4 – 20 8 – 25 8 – 25
Welding rod mm 4 – 5 3 – 4 / 4 – 5 3 – 4 3 – 4 / 4 – 5 3 – 4 / 4 – 5
Weight lbs 31 19 13 16 15
Length inches 32 22 18 27 23
Voltage V~ 230 230 230 230 230
Screw extruder yes yes yes yes yes
Container construction
Pipeline construction
Landfills / civil engineering
Brushless blower yes yes yes no no
Remarks
Catalog page
Overview of Extrusion Welders Output (lbs / hr)
very suitable suitable 1: Air and plast temperatures are shown via a display and can be separately and freely adjusted.
2: The air temperature is adjusted by means of a potentiometer (rotary dial). The heating of the plastic
mass is performed by the pre-heating air.
12.011.09.07.05.03.01.0 10.08.06.04.02.00.0
72 www.leister.com
1
2
3
4
5
6
7
8
3
4
7
2
1
5
6
www.leister.com
7
8
Wedge welders
GEOSTAR G5 / G7
Maintenance friendly: The well-thought-out construction enables
easy access to mechanical parts for
cleaning or service.
eDrive: Integrated display of weld pressure, travel
speed, wedge temperature and supply
voltage enables constant monitoring of key
weld parameters during the work process.
Ergonomic: The newly developed clamping mechanism
enables simple, one-hand operation to
engage rollers and begin welding.
Shifting gears: The GEOSTAR is equipped with a two-
gear transmission that can be modified in
accordance with work conditions in just a
few steps.
Weld pressure measurement: Constant measurement and display of
weld pressure.
Spacious: Plenty of room for easy loading of material
into the machine to accelerate the starting
of the welding process.
The new wedge geometry: The new geometry supports the natural
flow of geomembranes over the wedge.
An intelligent interface makes it possible
to replace the wedge in less than
one minute!
Powerful drive motor: G7 supplies up to
100% more power than the G5
GEOSTAR G5 and GEOSTAR G7 – Faster, lighter, smarter
Wedge welding redefined: with the GEOSTAR wedge welders for welding geomembranes. This mid-size, light-
weight welder boasts a robust, cast aluminum frame construction for an extreme power range. The GEOSTAR also
features an operating unit with integrated voltage display for permanent monitoring of weld parameters and voltage.
The new design makes wedge replacement a cinch and can be accomplished in under a minute. Additional features
73
148.489
151.684
153.557
149.174
153.560
153.361
153.338
153.359
155.568
154.272
154.676
146.204
146.346
151.847
Civ
il E
ngin
eerin
g /
G
EO
• Welding speed up to 39 ft/min
• G7 Longer wedge means int welds up to 45 percent faster
than the G5
• High heating capacity / heating power
• Digital display of weld pressure
• Integrated voltage display
• Wedge replacement in less than one minute
• Adjustable chassis height
Wedge welders
GEOSTAR G5 / G7 Accessories GEOSTAR G5 / G7
The GEOSTAR easily welds 800 ft. without difficulty in a single
pass during a field test (South Africa).
include: generous material input, smooth-motion gliding
of geomembranes—thanks to new wedge geometry—
and three different parking and maintenance positions.
The GEOSTAR is available in two performance classes:
GEOSTAR G5 and GEOSTAR G7.
Wedge Kit GEOSTAR G7,
5 x 2 inch, 230V/2500W,
copper wedge with test channel
Wedge Kit GEOSTAR G5,
3.5 x 2 inch, 230V/2500W,
copper wedge with test channel
Stainless steel wedge with test channel
3.5 x 2 inch, 230V/2500W
Wedge Kit GEOSTAR G5,
3.5 x 2 inch, 120V/1600W,
copper wedge with test channel
Stainless steel wedge with test channel
3.5 x 2 inch 120V/1600W
Other wedges available upon request
Drive roll D2 inch x 2 (3) inch; Traction
Step, Steel, pointed knurled, with test
channel
Drive roll D2 inch x 2 inch;
Steel, pointed knurled, with test
channel
Steel, blunt edge knurled, with test
channel
Other rollers on request
2 inch straight profile Roller w/screw
3.1 inch Silicone Rollers w/screw
2 inch Silicone Rollers w/screw
Prefabrication wagon for Geostar
Side support for Prefabrication wagon
(4 pieces required)
Brass brush
Technical data GEOSTAR G5 / G5 LQS GEOSTAR G7 / G7 LQS
Voltage V~ 120 / 220 - 240 220 - 240
Frequency Hz 50 / 60 50 / 60
Power W 1800 / 2800 2800
Max. heating temperature °F 860 860
Welding wedge inch 3.5 x 2 5 × 2
Max. overlap inch 6 6
Max. welding force lbs 350 350
Weld width with test channel inch 0.8 x 0.4 / 0.8 × 0.6 0.8 × 0.6
Drive speed*1 ft/min 2.6 - 39
Level 1: 2.6 – 20
Level 2: 5 – 39
2.6 - 39
Level 1: 2.6 – 23
Level 2: 5 – 39
Dimensions (L × W × H) inches 19 × 11 × 11 19 × 11 × 11
Weight lbs 36 39
Materials HDPE 30 – 120 Mil*²
PP, LDPE ,TPO, FPO,
PVC-P*3, CSPE*3,
EIA*3
HDPE 30 – 120 Mil*²
PP, LDPE ,TPO, FPO
additional materials upon request
Mark of conformity
Protection class I
*1: Conversion of gear 1– 2 using position change of sprocket wheels
*²: Material dependent. Thinner/thicker materals are possible based on the skill level
of the operator.
*3: Requires steel wedge
Article No.151.618 GEOSTAR G5, 120V / 1800W, 2 inch roller, copper wedge
with test channel, without plug
151.683 GEOSTAR G5, 230V / 2800W, 2 inch roller, copper wedge with test
channel, with Euro plug
151.035 GEOSTAR G7, 230V / 2800W, 2 inch roller, copper wedge
Included with purchase: Automatic welder, transport box, Allen keys (3 pcs.),
cleaning brush, operating instructions
For further accessories see www.leister.com/geostar
74 www.leister.com
LQS
GPS
GEOSTAR G5 / G7
LQS
equipped
with
GEOSTAR G5 / G7 LQS – Leister Quality System
The Leister Quality System (LQS) allows you to compile full quality documentation for all aspects of your welding
work. You can document every welding seam as a table, graphic or even with GPS coordinates. The GEOSTAR G7 /
G5 LQS provides all the advantages of state-of-the-art technology. It really stands out from the crowd – helping you
to technologically advance within the industry.
Pinpoint precisionBy activating the GPS function, you
can assign the welding seams preci-
sely to the relevant location (for GPS
and GLONASS format).
Wireless data transferAfter the welding process, the data
can be transferred conveniently via
WiFi. The transfer process only takes
a few seconds.
GEOSTAR G7 / G5 LQS • Proven Geostar welding technology
• Activatable data recording
• Welding parameter monitoring via
alarm function
• Data storage for 10,000 welds
Article No.:
155.152 GEOSTAR G7 LQS data recording, 230 V / 2800 W, copper wedge
with test channel, with Euro plug
156.135 GEOSTAR G5 LQS data recording, 230 V / 2800 W, copper wedge
with test channel, with Euro plug
75
Report
LQS
LQS LQS
Cloud
E-Mail (pdf)C
ivil
Eng
inee
ring
/
GE
O
GEOSTAR G5 in field operation.
Data evaluation on mobile devicesThe data is evaluated digitally via the
LQS app. This app can be downloa-
ded free of charge from the Windows
or Android Store. The LQS menus are
extremely easy to navigate and are
adapted to users' needs.
Data cloudThe data cloud opens up lots of extra
possibilities:
• Cloud function can be switched
on/off
• External data backup
• Unit management
• User management
• Decentralized access to welding
data, e.g., from back office
Welding reportThe LQS app can be used to produce
records in all standard forms:
• DVS report
• Tables and graphics
• pdf and csv format
76 www.leister.com
Wedge welder
COMET
Wedge welder
COMET USB
• Lightweight and compact
• Digital display of temperature and velocity
• Closed loop control of temperature and drive
• Easy and user friendly
• Digital display of welding pressure
• Complete recording of all relevant weld parameters
• USB memory system designed for use on construction sites
• Convenient data transfer
COMET / COMET USB: The highflyers.
This compact heavy-duty welding machine is in use worldwide. The small powerhouse is specially designed for the
demands of landfill sites, mines and tunnels. Documentation made simple: The COMET USB memory system is
designed for use on construction sites. Because this compact hot-wedge welding machine records all relevant
welding parameters, data transfer is mere child's play.
Technical Data
Voltage V~ 120 / 230
Power W 1850 / 1500 / 1200
Temperature °F 176 – 788
Max. overlap inch 5 (125 mm)
Speed ft/min 2.6 – 10.5
Welding pressure N 100 – 1000
Weld seam width inches 2 × 15, with test channel
Material thickness mil 20 – 120
Size (L × W × H) inches 12 × 10 × 10
Weight lbs 17
Conformity mark
Protection class I
Article No.107.547 COMET, with 2 inch (50 mm) wedge for PE, 230 V / 1200 W *
107.538 COMET, with 2.8 inch (70mm) wedge for PE, 230 V / 1500 W *
145.893 COMET, with 3.7 inch (95 mm) wedge for PE 230 V / 1850 W *
107.558 COMET, with 2.0 inch (50 mm) wedge for PVC, 230 V / 1200 W *
107.553 COMET, with 2.0 inch (50 mm) wedge for PE, 120 V / 1200 W*
107.539 COMET, with 2.8 inch (70 mm) wedge for PE, 120 V / 1500 W*
Additional versions available upon request. * = with test channel, EURO plug
Included with purchase: Welder, manual, short guide-bar, storage case.
Technical Data
Voltage V~ 120 / 230
Power W 1850 / 1500 / 1200
Temperature °F 176 – 788
Max. overlap inches 5 (125 mm)
Speed ft/min 2.6 – 10.5
Welding pressure N 100 – 1000
Weld seam width inch 2 × 0.6, with test channel
Material thickness mil 20 – 120
Size (L × W × H) inches 12 × 10 × 10
Weight lbs 17
Conformity mark
Protection class I
Article No.137.626 COMET USB, with 2.0 inch (50 mm) wedge for PE, 230 V / 1200 W *
138.088 COMET USB, with 2.8 inch (70 mm) wedge for PE, 230 V / 1500 W *
146.052 COMET USB, with 3.7 inch (95 mm) wedge for PE, 230 V / 1850 W *
Additional versions available upon request. * = with test channel, EURO plug
Included with purchase: Welder, manual, short guide-bar, memorystick, storage case
77
112.974
129.224
144.416
100.327
100.328
100.329
100.330
100.331
100.332 Civ
il E
ngin
eerin
g /
G
EO
Accessories COMET / COMET USB
Comet operating in the tunnel ... ... or on a landfill site.
Perfectly protected in the
storage case.
126.448
(included with purchase)
Fields of application COMET / COMET USB
Power 1850 W 1500 W 1200 W
Type of material Wedge Material thickness Wedge Material thickness Wedge Material thickness
PE-HD, PE-C, PP 3.7 inch copper 60 – 120 mil 2.7 inch copper 40 – 100 mil 2 inch copper 20 – 60 mil
PE-LD 3.7 inch copper 60 – 120 mil 2.7 inch copper 40 – 100 mil 2 inch copper 20 – 60 mil
PVC-P 2.7 inch steel 80 – 120 mil 2 inch steel 40 – 80 mil
Extremely light cross handle 5 lbs,
material: aluminum
Guide-bar, complete
USB memory stick
Drive roller 2 inch, steel, sharp edge
knurled, with test channel
Drive roller 2 inch, steel, sharp edge
knurled, without test channel
Driveroller 2 inch, steel, blunt edge
knurled, with test channel
Drive roller 2 inch, steel, blunt edge
knurled, without test channel
Drive roller 2 inch, silicon, with test
channel
Drive roller 2 inch, silicon,
without test channel
Roles are compatible with COMET and TWINNY T and S welding machines.
78 www.leister.com
Combi-wedge welder
TWINNY T
Combi-wedge welder
TWINNY T USB
• Simple operation
• High welding speed
• Digital display of temperature and velocity
• Closed-loop control of temperature and drive
• Perfect welding result even in harsh environmental
conditions thanks to hot-air system.
• Digital display of weld pressure
• Complete recording of all relevant weld parameters
• USB memory system
• Data transfer made simple
TWINNY T / TWINNY T USB: The little all-rounders.
The TWINNY T is excellent for welding PVC and other thin or soft membranes. It is available with or without air-
test channel. The TWINNY T USB, which makes data storage and display easy with a USB flash memory system,
is perfect for critical applications where constant real-time monitoring of primary weld conditions can be stored
and displayed.
Technical Data
Voltage V~ 230 / 120
Power W 2300 / 1900
Temperature °F 68 - 1040
Max. overlap mm 125
Drive speed ft/min 2.6 – 10.5
Welding pressure N 100 – 1000
Size (L × W × H) inches 13 × 14 × 10
Weight lbs 6.9 – 7.9
Conformity mark
Protection class I
Article No.107.562 TWINNY T for civil engineering, 230 V / 2300 W, with test channel,
with combi-wedge long, with Euro plug
107.564 TWINNY T for civil engineering, 230 V / 2300 W, with test channel,
with combi-wedge short, with Euro plug
111.190 TWINNY T for tunnel construction, 230 V / 2300 W, with test channel,
with combi-wedge short, with Euro plug
143.842 TWINNY T for tunnel construction, 120 V / 1900 W, with test channel,
with combiwedge short, with UK plug
Civil engineering version: Welder, manual, long guide-bar (129.224), storage case
Tunneling version: Welder, manual, short guide bar, storage case
Technical Data
Voltage V~ 230 / 120
Power W 2300 / 1900
Temperature °F 68 - 1040
Max. overlap mm 125
Speed ft/min 2.6 – 10.5
Welding pressure N 100 – 1000
Size (L × W × H) inches 13 × 14 × 10
Weight lbs 6.9 – 7.9
Conformity mark
Protection class I
Article No.138.089 TWINNY T USB for civil engineering, 230 V / 2300 W,
with test channel, with combi-wedge long, with Euro plug
Additional versions (incl. 120 V) available upon request.
Civil engineering version: Welder, manual, long guide bar (129.224), USB-memory
stick, storage case
Tunneling version: Welder, manual, short guide-bar (129.224), storage case
79
112.974
129.224
100.517100.519100.518100.520
100.525100.526
144.416
126.448
103.604
103.602
101.905
101.910
101.913
Civ
il E
ngin
eerin
g /
G
EO
Combi-wedge welder
TWINNY S Accessories TWINNY T / T USB / TWINNY S
TWINNY T, with convenient cross-handle, at work overhead
welding in a tunnel.
• Simple operation
• Lightweight
• High welding speed
• Stepless adjustment of temperature and drive
• Perfect welding result even in harsh environmental
conditions thanks to hot-air system.
TWINNY S: Perfect weight.
This lightweight tool is optimized for overhead welding
and is ideal for thin materials used in civil engineering
and tunnel construction. Leister offers a choice between
replaceable combi-wedges with or without test channel.
100.539
Technical Data
Voltage V~ 120 / 230
Power W 2900
Temperature °F 176 - 1100
Max. overlap mm 125 mm
Speed
drive 256:1
drive 144:1
ft/min 0.7 – 8.2
4.6 – 13 (20)
Welding pressure N 1000 / 500 (256:1 / 144:1)
Size (L × W × H) inches 14 × 15 × 11
Weight lbs 14 – 15
Conformity mark
Protection class II
Article No.119.031 TWINNY S for tunnel construction, drive 256:1, 230 V /
2900 W, with test channel, combi-wedge long, Euro plug
119.027 TWINNY S for civil engineering, drive 256:1, 230 V /
2900 W, with test channel, combi-wedge long, Euro plug
119.008 TWINNY S for civil engineering, drive 144:1, 230 V /
2900 W, with test channel, combi-wedge short, Euro plug
128.808 TWINNY S for civil engineering, drive 144:1, 19 ft/min,
230 V / 2900 W, with test channel, combi-wedge short, Euro plug
119.039 TWINNY S for tunnel construction, drive 256 : 1, 120V/1900W,
with test channel, combi-wedge long, w/o plug
Extremely light cross handle 5 lbs,
material: aluminum
Long guide-bar, complete (shown)
Guide handle, complete
Combi-wedge short
50 mm, with test channel
30 mm, with test channel
50 mm, without test channel
30 mm, without test channel
Combi-wedge long, complete
50 mm) with test channel
50 mm, without test channel,
slotted, perforated
USB memory stick
TWINNY T USB
Storage case
(included with purchase)
230 V / 2100 W heating element,
TWINNY T / T USB
120 V / 1800 W heating element,
TWINNY T / T USB
230 V / 2750 W heating element,
TWINNY S
230 V / 2100 W heating element,
TWINNY S
120 V / 1800 W heating element,
TWINNY S
Cvile engineering version: Welder, manual, guide-bar long (129.224), storage case
Tunneling version: Welder, manual, guide-bar short, storage case
See COMET for roles.
81
115.274115.176115.712115.857115.921
115.276 138.570
115.281115.279115.699115.703115.701
115.280 115.278 115.702 115.700
108.985
142.717
Civ
il E
ngin
eerin
g /
G
EO
Semiautomatic hot-air welder
TRIAC DRIVE AT Accessories TRIAC DRIVE AT
12 mm pressure roller, steel
30 mm pressure roller, steel
40 mm pressure rolle, steel
30 mm pressure roller, silicone
40 mm pressure roller, silicone
Single supporting carrier, brass
Silicone roller
Supporting wheel, brass
Overlap welding nozzle, inside,
push-fit
38 mm, with grip
30 mm, with grip
12 mm, without grip
38 mm, without grip
30 mm, without grip
Overlap welding nozzle, outside,
push-fit
38 mm, with grip
30 mm, with grip
38 mm, without grip
30 mm, without grip
Storage case
(included with purchase)
230 V / 1550 W heating element
for TRIAC ST
120 V / 1550 W heating element
for TRIAC ST
230 V / 1550 W heating element
for TRIAC AT
TRIAC DRIVE AT: The little all-rounder
This semi-automatic hot-air welder that's truly one-of-a-
kind. Its flexible concept enables the TRIAC DRIVE AT
to be used in all kinds of applications. The perfect choice for welding joint sealing tape.
• Consistent and up to 3 times faster than hand welding
• Unique semiautomatic welding machine
• Can perform automatic welding in places other devices
cannot reach
• With guide, inside or outside nozzle for all precision work in
tunnels (available as optional accessory)
142.718
142.637
114.682
Technical Data
Voltage V~ 230
Power W 1700
Temperature °F 176 - 1202
Speed ft/min 1.6 – 9.8
Air flow cfm (68 °F) 4.2 – 8.5
Size (L × W × H) inches 13 × 14 × 10
Weight lbs 9 (with 10 ft cord)
Conformity mark
Protection class II
Article No.115.125 TRIAC DRIVE ST without guide, 100-120 V 1600 W, nozzle outside,
without grip, 40 mm welding nozzle
117.331 TRIAC DRIVE AT 230 V / 1700 W, inside, without guide, 30 mm
welding nozzle, without grip, pressure roller silicone, EURO-plug
148.606 TRIAC DRIVE AT 230 V / 1700 W, inside, without guide, 12 mm
welding nozzle, with grip, pressure roller steel, EURO-plug
148.605 TRIAC DRIVE AT 230 V / 1700 W, inside, without guide, 40 mm
welding nozzle, without grip, pressure roller steel, EURO-plug
Additional versions available upon request.
82 www.leister.com
146.239146.240
146.241146.242145.899
146.245146.246146.247
146.232146.233146.234
146.230146.218
117.055
136.859
117.790
116.367
149.744
86
WELDPLAST S6: The workhorse.
WELDPLAST S6 is the world's highest rated handheld
extrusion welder. With an output of 13 lbs/hr, it is sur-
prisingly maneuverable. It features a brushless, preheat
motor, multifunction display and comfortable ergo-grip,
making the S6 Leister's flagship extrusion welder.
Digitally-regulated extrusion welder
WELDPLAST S6 Accessories WELDPLAST S6
WELTPLAST S6, Gold Mine Mexico.
• 13 lbs output per hour
• Highest possible preheating capacity
• Adjustable control wheel
• Maintenance-free hot-air blower
• Multifunctional display
* a = welding seam thickness
Welding shoe complete
54 × 40 × 52 mm blank welding shoe
74 × 50 × 58 mm blank welding shoe
25 mm overlap
35 mm overlap
40 mm overlap
20 mm V-seam
25 mm V-seam
30 mm V-seam
20 mm fillet weld seam (a = 14 mm*)
25 mm fillet weld seam (a = 17.5 mm*)
30 mm fillet weld seam (a = 21 mm*)
Corner seam 14 mm
Corner seam 20 mm
35 mm preheat nozzle, large
50 mm preheat nozzle, XL large
Side hot-air guide
(Position 9h/3h)
Ultra strong storage case
WELDPLAST S6
(included with purchase)
Insulation sleeve / heat blanket
Technical Data
Voltage V~ 230
Power W 4600
Material PE /PP
Welding rod mm 4 – 5
Output lbs/hr 8.6 – 13.2
Size (L × W × H) inches 33 × 5 × 10
Weight lbs 31
Conformity mark
Protection class I
Article No.134.318 Extrusion Welder WELDPLAST S6, 230 V / 4600 W,
with CEE 32A plug
Included with purchase: WELDPLAST S6, overlap welding shoe, storage case
General accessories
83
146.239146.240
146.241146.242145.899
146.243146.244146.245146.246146.247
146.231146.232146.233146.234
146.230146.218
144.904
145.704
117.064117.065
117.053117.518141.177
136.231
149.723
86
Civ
il E
ngin
eerin
g /
G
EO
Digitally-regulated extrusion welder
WELDPLAST S4
• Compact housing design reduces noise and guarantees
optimal cooling for the electronics and drive.
• Microprocessor to regulate the welding process and to
monitor the tool
• Menu with function programs
• Dual-sided twist-free wire intake
• Maintenance-free blower
Accessories WELDPLAST S4
The powerful WELDPLAST S4 at work.
WELDPLAST S4
The WELDPLAST S4 is the first extrusion welder of its
kind with brushless, maintenance-free motor for gener-
ating preheated air. Output of up to 8.8 pounds per
hour is made possible thanks to the S4's powerful
drive system.
Welding shoe complete
54 × 40 × 52 mm blank welding shoe
74 × 50 × 58 mm blank welding shoe
25 mm overlap
35 mm overlap
40 mm overlap
12 mm V-seam
15 mm V-seam
20 mm V-seam
25 mm V-seam
30 mm V-seam
15 mm fillet weld seam (a = 10 mm*)
20 mm fillet weld seam (a = 14 mm*)
25 mm fillet weld seam (a = 17.5 mm*)
30 mm fillet weld seam (a = 21 mm*)
Corner seam 14 mm
Corner seam 20 mm
45° angled adapter
90° angled adapter
Caution: You must use welding shoes
with an integrated air guide for this
Side hot-air guide
Top hot-air guide
preheating nozzle
small, 20 mm
medium, 25 mm
large, 35 mm
Pre-heat reflector
Insulation sleeve / heat blanket
* a = welding seam thickness
Technical Data
Voltage V~ 230
Power W 3680
Material PE /PP
Welding rod mm 3 – 4 / 4 – 5
Output lbs/hr 3.3 – 8.8
Size (L × W × H) inches 22 × 4 × 12
Weight lbs 19
Conformity mark
Protection class I
Article No.146.812 WELDPLAST S4, 230 V / 3680 W, 4–5 mm, top hot air guide,
40 mm overlap welding shoe, preheating nozzle large, with Euro plug,
storage case
116.948 WELDPLAST S4, 230 V / 3680 W, 3–4 mm, side hot air guide, blank
welding shoe, preheating nozzle large, medium and small, with Euro
plug, storage case
General accessories
84 www.leister.com
145.945145.946
145.896145.947145.897
145.915145.907145.903145.909
145.944145.812145.940
146.645146.649146.651
145.811145.488
139.460
139.461
134.361
143.776
155.829
131.451
136.231
154.002
86
WELDPLAST S2: The masterpiece.
The WELDPLAST S2 is a compact, ergonomically-
designed workhorse. The handy size extruder puts
out over four pounds per hour an can even weld TPO
materials without difficulty.
Digitally-regulated extrusion welder
WELDPLAST S2 / S2 TPO Accessories WELDPLAST S2 / S2 TPO
The robust WELDPLAST S2 welding a patch in a tunneling
application.
• Maintenance-free blower
• Perfect weld seam quality
• Multifunctional display
• Ergonomic and handy
• Successfully operated worldwide
Welding shoe complete
45 × 30 × 54 mm blank welding shoe
74 × 50 × 58 mm blank welding shoe
25 mm overlap
30 mm overlap
35 mm overlap
8 /10 mm V-seam
12 mm V-seam
15 mm V-seam
20 mm V-seam
8 / 10 mm fillet weld (a = 7 mm*)
15 mm fillet weld (a = 10*)
20 mm fillet weld (a = 14 mm*)
Corner outside seam 10 mm
Corner outside seam 12 mm
Corner outside seam 15 mm
Corner seam 14 mm
Corner seam 20 mm
45° angled adapter
90° angled adapter
Air filter
(included with purchase)
Textile dust filter
(sold separately)
Air filter
Tool rest
Pre-heat reflector
Insulation sleeve / heat blanket
* a = welding seam thickness
Technical Data
Voltage V~ 230
Power W 3000
Material standard version PE /PP
Welding rod mm 3 – 4
Output 3 mm lbs/hPE: 1.3 – 2.9
PP: 1.1 – 2.65
Output 4 mm lbs/hPE: 2.2 – 5.0
PP: 2.0 – 4.4
Size (L × W × H) inches 18 × 4 × 10
Weight lbs 13
Conformity mark
Protection class I
Article No.127.215 WELDPLAST S2, 230 V / 3000 W, with Euro plug
Included with purchase: WELDPLAST S2, blank welding shoe, storage case
136.602 WELDPLAST S2, 230 V / 3000 W, TPO, with Euro plug
Included with purchase: WELDPLAST S2, UBL-blank welding shoe, storage case
General accessories
85
Civ
il E
ngin
eerin
g /
G
EO
Analog extrusion welder
FUSION 3
• High welding performance
• Compact and handy
• Motor start-up protection prevents cold start
• Dual-sided twist-free wire intake
• 360° rotatable welding shoe
Analog extrusion welder
FUSION 3C
• High welding performance
• Compact and handy
• Motor start-up protection prevents cold start
• Dual-sided twist-free wire intake
• 360° rotatable welding shoe
FUSION 3 / 3C: THE slim twins.
With its long and narrow shape, the FUSION 3 enables
comfortable work, even on the ground. The sligthly
shorter 3C also provides an astounding output volume
of up to eight pounds per hour. Due to its length, the FUSION 3 is especially suited for civil
engineering applications.
Technical Data
Version 3 – 4 Version 4 – 5mm
Welding rod mm 3 4 4 5
Output PE lbs/hr 4.4 – 5.5 5.9 – 7.9 4.6 – 5.7 5.9 – 7.9
Output PP lbs/hr 4.0 – 5.0 5.5 – 7.5 4.0 – 5.3 5.5 – 7.5
Voltage V~ 230
Power W 3500
Material PE / PP
Size (L × W × H) inches 26 × 4 × 7
Weight lbs 16
Conformity mark
Protection class II
Artikel-Nr. 118.300 FUSION 3, 230 V / 3500 W, welding rod 3–4 mm, Euro plug
144.615 FUSION 3, 230 V / 3500 W, welding rod 4–5 mm, Euro plug
Included with purchase: FUSION 3, blank welding shoe, storage case
Technical Data
Version 3 – 4 Version 4 – 5mm
Welding rod mm 3 4 4 5
Output PE lbs/hr 4.4 – 5.5 5.9 – 7.9 4.6 – 5.7 5.9 – 7.9
Output PP lbs/hr 4.0 – 5.0 5.5 – 7.5 4.0 – 5.3 5.5 – 7.5
Voltage V~ 230
Power W 3200
Material PE / PP
Size (L × W × H) inches 23 × 4 × 9
Weight lbs 15
Conformity mark
Protection class II
Artikel-Nr. 123.866 FUSION 3C, 230 V / 3200 W, Welding rod 3–4 mm, Euro plug
144.826 FUSION 3C, 230 V / 3200 W, Welding rod 4–5 mm, Euro plug
Included with purchase: FUSION 3C, blank welding shoe, storage case
86 www.leister.com
145.945145.946
145.896145.947145.897
145.915145.907145.903145.909145.916145.905
145.944145.812145.940145.816145.817
146.643146.645146.649146.651
145.811145.488
148.817
148.816
135.082
131.451
160.454
136.231
149.421149.420
144.095
123.173119.540
134.567109.984
113.268123.561
Accessories FUSION 3 / FUSION 3C General accessories
Welding shoe complete
45 × 30 × 54 mm blank welding shoe
74 × 50 × 58 mm blank welding shoe
25 mm overlap
30 mm overlap
35 mm overlap
8 /10 mm V-seam
12 mm V-seam
15 mm V-seam
20 mm V-seam
25 mm V-seam
30 mm V-seam
8 / 10 mm fillet weld (a = 7 mm*)
15 mm fillet weld (a = 10 mm*)
20 mm fillet weld (a = 14 mm*)
25 mm fillet weld (a = 17.5 mm*)
30 mm fillet weld (a = 21 mm*)
Corner outside seam 8 mm
Corner outside seam 10 mm
Corner outside seam 12 mm
Corner outside seam 15 mm
Corner seam 14 mm
Corner seam 20 mm
45° angled adapter
90° angled adapter
Stainless steel air filter for FUSION 3C
Tool restWELDPLAST S2 / S2 PVC / FUSION 2
FUSION 3C
WELDPLAST S4 / S6 / FUSION 3
Pre-heat reflector
Insulation sleeve FUSION 3
Insulation sleeve FUSION 3C
Welding rod de-reeler
Storage case
WELDPLAST S4 / FUSION 3
WELDPLAST S2 / S2 TPO / FUSION
3C
(included with purchase)
Heating element,
230 V / 2600 W, for WELDPLAST S6
230 V / 2200 W, for WELDPLAST
S4 / S2
230 V / 1100 + 1100 W, for FUSION 3
230 V / 1750 W, for FUSION 3C
The FUSION 3 for comfortable working in upright positions.
FUSION 3C with heat blanket.
87
134.832
108.185
144.416
145.813146.449
163.003
163.004
143.828
137.855
138.902
138.539C
ivil
Eng
inee
ring
/
GE
O
Blank in uniform size, quickly produced with the Coupon Cutter.
Accessories EXAMO 300F USB, 600F USB
EXAMO: The inspector.
Will your seam meet industry standards? Can it with-
stand the specified peel, tensile and shear forces?
EXAMO performs tests at the construction site—quick-
ly, reliably and effortlessly.
• Construction-site approved
• Handy, robust and reliable
• Testing of elongation, peak force, tear force, test speed
and position
• Optional jaws suitable for geo textiles (see accessories)
• Electronic recording of measurement data
Testing and calibration kit
to test and calibrate
your EXAMO USB
Jaw kit 2.36 inch 60 mm)
for geotextiles, includes two pairs of
jaws
USB Memory-stick
COUPON CUTTER 0.79 × 5.9 inch
COUPON CUTTER 0.98 × 5.9 inch
Holder Cutting knife complete ( Retro
fitting of 0.79 (20) and 5.9 inch
(25 mm) Blade cutters) Cutting plate
Spare Blade set (0.79 and 5.9 inch)
Cutting plate
Leister cutter with four spare blades
Hooked blade for LEISTER-cutter
(10 dispenser with 10 pcs=100 pcs)
Straight-edge blade for LEISTER-cutter
(10 dispenser with 10 pcs = 100 pcs)
Tensiometer
EXAMO 300F USB, 600F USB
Technical Data
Type 300F USB 600F USB
Voltage V~ 230 230
Power W 200 200
Tensile load N 4000 4000
Jaw spacing mm 5 – 300 5 – 600
Range inches 11.8 23.6
Test speed inches/min 0.8 – 21.6 0.8 – 21.6
Sample thickness mil max. 276 max. 276
Sample width inchesmax. 1.6
(2.4 optional)
max. 1.6
(2.4 optional)
Size (L × W × H) inches29 × 11 × 7
(storage case)
41 × 11 × 7
(storage case)
Weight lbs 30.8 38.6
Conformity mark
Protection class I
Article No.: 139.063 EXAMO 600F USB, 120 V / 200 W, incl. USB memory stick, without plug
139.059 EXAMO 300F USB, 230 V / 200 W, incl. USB memory stick, Euro plug
88 www.leister.com
Article No.: 153.026 VACUUM BELL 320 mm
152.981 VACUUM BOX 32" x 12" x 6" (830 x 320 x 150 mm)
153.024 VACUUM PUMP 230V
153.025 VACUUM PUMP 120V
Caution: The complete testing system is made up from a combination of one
VACUUM BOX or VACUUM BELL to be operated with one VACUUM PUMP.
VACUUM PUMP / VACUUM BOX: Fast and reliable.
The simple, safe and non-destructive way to test the tightness of overlap weld seams, using the Leister
VACUUM BOX/BELL. Soapy water is applied to the welding zone to be checked. After connection to the VACUUM
PUMP, a vacuum is generated above the zone with the VACUUM BOX/BELL. Thanks to its generous dimensions,
and the practical drain valve, even longer weld seams can be tested quickly and reliably.
Testing instruments
VACUUM PUMP
• Simple and precise tightness testing
• Round structural form, ideal for details and uneven surfaces.
• Manometer bar/psi
• Large testing area
• Simple handling
• Clear arrangement of the fittings
• Manometer bar/psi
• Durable VACUUM PUMP
• Perfectly packaged and handy
• Flexible, robust hose
Testing instruments
VACUUM BOXTesting instruments
VACUUM BELL
89
142.569 150.142
Civ
il E
ngin
eerin
g /
G
EO
Article No.: 142.475 Flexible injection needle with manometer
Article No.: 150.720 Tapered injection needle with manometer (standard)
158.374 Tapered injection needle with manometer PSI (ASTM)
Flexible spare needle
(fits also to 150.720)
Accessories Accessories Tapered Spare needle
(fits also to 142.475)
Compressed air testing device.
The reliable and handy compressed air testing device
from Leister is the perfect solution for testing the tight-
ness of double tap seams with test channels. The revised
model now offers even more reliable results – not only
during operation but also for the discovery of leaks.
• Thin, flexible needle
• Simple and precise tightness testing
• High user safety through hand and needle protection
• Manometer with bar and psi scale
• Practical device case
Testing instrument
Compressed air testing device with thin test needle
Testing instrument
Compressed air testing device with thick test needle
• Very strong, tapered needle
• Simple and precise tightness testing
• High user safety through hand and needle protection
• Manometer with bar and psi scale
• Practical device case
Testing the leak-tightness of lap seams with test channel.
Manometer standard
(bar/psi)
Manometer ASTM
(psi/kPa)
Standard
Standard
ASTM
91
92
94 / 95
96
97
98 / 99
100
101 / 102
103
104
105
12 – 15
13 – 15
18 / 19
26 / 27
28
29
30 / 31
31
32
34 / 35
Pla
stic
Fab
ricat
ion
Plastic Fabrication
Overview of extrusion welders
FUSION 1
WELDPLAST S6
WELDPLAST S4
WELDPLAST S2 / S2 PVC
WELDPLAST 1
FUSION 3 / 3C
FUSION 2
General accessories extrusion welders
Welding rods
Hot-Air Hand Tools
TRIAC ST
TRIAC AT
HOT JET S
AIRSTREAM ST
ROBUST
WELDING PEN R / WELDING PEN S
DIODE PID / DIODE S
MINOR
LABOR S
General accessories
Air purification system, Spain. Material: HDPE
The Wave House, San Diego. Material: PVC
Electroplating tank, Turkey. Material: PP
92 www.leister.com
a
s
αs
s
a
s
α
1 1 1 1 2 2 2 3
96 97 98 / 99 100 101 / 102 101 / 102 103 94 / 95
6.05.54.53.52.51.50.5 5.04.03.02.01.00.0
WELDPLAST S1
WELDPLAST S2
WELDPLAST S4
FUSION 3
FUSION 3C
FUSION 2
WELDPLAST S6
15 – 25
8 – 15
15 – 25
25 – 35
15 – 25
5 – 8
4 – 8
FUSION 14 – 8
Fillet welding seam X-seams = ¹³⁄32" – 1 ¹9⁄32" = α 60°
s = 2" – 2 ¹³⁄32" = α 50°
V-seams = ³⁄16" – ¹³⁄16" = α 60°
s = 1" – 1 ³⁄16" = α 50°
Overlap seamCorner outside seam
Product comparison
Digitally-regulated extrusion welders Analog extrusion welders
Device type WELDPLAST S6 WELDPLAST S4 WELDPLAST S2 WELDPLAST S1 FUSION 3 FUSION 3C FUSION 2 FUSION 1
Output (HDPE) lbs / hr 8.6 – 13.2 3.3 – 8.8 1.3 – 5.0 0.4 – 1.8 3.5 – 7.7 3.5 – 7.7 2.9 – 4.0 0.6 – 1.7
Material HDPE, PP HDPE, PP HDPE, PP, PVC PE, PP, PVC, etc. HDPE, PP HDPE, PP HDPE, PP PE, PP
Wall thickness inches ¹9⁄32 - 1 ¹9⁄32 5⁄16 - 1 ¹³⁄32 5⁄32 - ¹³⁄16 5⁄32 - ¹³⁄32 5⁄16 - 1 5⁄16 - 1 ¼ – ¹9⁄32 5⁄32 - ¹³⁄32
Welding rod inches 5⁄32 - ³⁄16 ⅛ - 5⁄32 / 5⁄32-³⁄16 ⅛ - 5⁄32 ⅛ - 5⁄32 ⅛ - 5⁄32 / 5⁄32 - ³⁄16 ³⁄16 ⅛ or 5⁄32
Weight lbs 31 18 13 10 16 15 13 7.5
Length inches 32 22 18 17 27 23 18 17
Voltage V~ 230 230 230 120 / 230 230 230 230 120
Screw extruder yes yes yes yes yes yes yes yes
Container construction
Pipeline construction
Landfills / civil engineering
Brushless blower yes yes yes yes no no no no
Remarks
Catalog page
Overview of Extrusion Welders Output (lbs / hr)
Possibilities of welding seams a = seam size s = material thickness α = milling angle
very suitable suitable unsuitable 1: Air and Plast temperatures electronically controlled with integrated display.
2: Hot air heated extruder temperature controlled manually.
3: Warm air heated extruder, air temperature electronically controlled with integrated display.
Ideal wall thickness (inches) Min Max
12.011.09.07.05.03.01.0 10.08.06.04.02.00.0
0.6 – 1.0
0.3 – 0.6
0.6 – 1.0
1.0 – 1.4
0.6 – 1.0
0.2 – 0.3
0.2 – 0.3
0.2 – 0.3
94 www.leister.com
3
1
2
1
2
3
4
2
3 44
Digitally regulated extrusion welder
FUSION 1
Rod shape: Reduced design for increased maneu-
verability in small spaces
Double-sided wire intake: For more flexibility when welding
LED light: To illuminate the welding area
Handle: Can be mounted for one-handed
welding
Ingeniously simple – FUSION 1
Your satisfaction is our goal. Which is why we are developing welding devices to meet your requests and requi-
rements. And with the usual LEISTER quality, of course. The reduced design of the FUSION 1 offers increased
maneuverability when welding. Flexibility guarantees an optimally mountable handle. Ingeniously simple extrusion
welding – FUSION 1.
95
104
163.793
163.778
163.780
163.779
163.782
163.784
163.785
163.786
162.665
Pla
stic
Fab
ricat
ion
Accessories FUSION 1
Digitally regulated extrusion welder
FUSION 1
• Controlled: Automatically controlled air temperature
• Suspension device: Effortlessly weld longer by hanging up
the device
• Compact and slimline: Thanks to integrated air guide
Technical data
Voltage V~ 120
Power W 1450
Materials PE, PP
Welding rod inch ⅛ or 5⁄32 (3 or 4 mm)
Output 3 HD-PE lbs/hr 0.6 – 1.0
Output 4 HD-PE lbs/hr 0.7 – 1.7
Size (L × B × H) inches17.16 × 3.62 × 5.24
(9.29 with handle)
Weight lbs 7.5
Conformity marking
Protection class II
Article No.: 162.799 FUSION 1, 120 V / 1450 W, with US-plug
162.800 FUSION 1, 230 V / 1200 W, with EU-plug
163.165 FUSION 1, 230 V / 1200 W, with CEE-plug
Included with purchase: FUSION 1, case, welding shoe, Allen key, instruction
manual, handle
FUSION 1 – More flexibility during welding thanks to its slim design.
General accessories
Welding shoe CL14 IA
Welding shoe K5/6 IA
Welding shoe K8/10 IA
Welding shoe K12 IA
Angled welding shoe AK-10 70°
Angled welding shoe AK-10 30°
Angled welding shoe AV-10 30°
Welding shoe Rohling IA
Insulation sleeve
96 www.leister.com
146.239146.240
146.241146.242145.899
146.245146.246146.247
146.232146.233146.234
146.644146.646146.652
146.230146.218
117.055
136.859
117.790
149.744
104
*a = Welding seam thickness
Digitally regulated extrusion welder
WELDPLAST S6
• 13 lbs/hr output
• Highest possible preheating capacity
• Adjustable control wheel
• Maintenance-free hot-air blower
• Multifunctional display
Accessories WELDPLAST S6
The WELDPLAST S6 is guided easily with the practical control
wheel grip.
WELDPLAST S6: The workhorse.
WELDPLAST S6 is the highest rated handheld extrusion
welder. With an output of 13 lbs / hr, it is surprisingly
maneuverable. It features a brushless, preheated motor,
multifunction display and comfortable ergo-grip,
making the S6 Leister's flagship extrusion welder.
Welding shoe complete2 ⅛" × 1 9⁄16" × 2 ¹⁄16" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank welding shoe
1" (25 mm) overlap
1 ⅜" (35 mm) overlap
1 9⁄16" (40 mm) overlap
²5⁄32" (20 mm) V-seam
1" (25 mm) V-seam
1 ³⁄16" (30 mm) V-seam
²5⁄32" fillet weld seam (a = 9⁄16"*)
1" fillet weld seam (a = ¹¹⁄16"*)
1 ³⁄16" fillet weld seam (a = ¹³⁄16"*)
Corner outside seam ¹³⁄32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam 9⁄16" (14 mm)
Corner seam ¹9⁄32" (15 mm)
1 ⅜" (35 mm) preheating nozzle, large
2" (50 mm) preheating nozzle, XL
Side hot-air guide
Insulation sleeve / heat blanket
WELDPLAST S6
General accessories
Technical Data
Voltage V~ 230
Power W 4600
Material PE / PP
Welding rod inches (mm) 5⁄32 or ³⁄16 (4 or 5 mm)
Output lbs / hr 8.6 – 13.2
Size (L × W × H) inches 33 × 5 × 10
Weight lbs 31
Conformity mark
Protection class I
Article No.: 134.318 WELDPLAST S6, 230 V / 4600 W, CEE 32A plug
Included with purchase: WELDPLAST S6, overlap welding shoe, storage case
97
146.239146.240
146.241146.242145.899
146.243146.244146.245146.246146.247
146.231146.232146.233146.234
146.642146.644146.646146.652
146.230146.218
144.904
145.704
117.064
117.065
117.053117.518141.177
149.723
104
Pla
stic
Fab
ricat
ion
Digitally-regulated extrusion welder
WELDPLAST S4
WELDPLAST S4: The workmate.
The WELDPLAST S4 is the first extrusion welder of
its kind with a brushless, maintenance-free motor for
generating preheated air. Output, of up to 8.8 lbs/hr, is
possible thanks to the S4's powerful drive system.
Accessories WELDPLAST S4
The powerful WELDPLAST S4 in use.
• Compact housing design reduces noise and guarantees
optimal cooling for the electronics and drive.
• Microprocessor regulates the welding process and monitors
the tool
• Menu with function programs
• Dual-sided, twist-free wire intake
• Maintenance-free blower
Welding shoe complete2 ⅛" × 1 9⁄16" × 2 ¹⁄16" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank welding shoe
1" (25 mm) overlap
1 ⅜" (35 mm) overlap
1 9⁄16" (40 mm) overlap
¹5⁄32" (12 mm) V-seam
¹9⁄32" (15 mm) V-seam
²5⁄32" (20 mm) V-seam
1" (25 mm) V-seam
1 ³⁄16" (30 mm) V-seam
¹9⁄32" fillet weld seam (a = ¹³/32"*)
²5⁄32" fillet weld seam (a = 9/16"*)
1" fillet weld seam (a = ¹¹⁄16"*)
1 ³⁄16" fillet weld seam (a = ¹³⁄16"*)
Corner outside seam 5⁄16" (8 mm)
Corner outside seam ¹³⁄32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam ¹5⁄32" (12 mm)
Corner seam ²5⁄32" (20 mm)
Angled adapter 45°
Angled adapter 90°
Caution: You must use welding shoes
with an integrated air guide for this.
Side hot-air guide
Top hot-air guide
Preheating nozzle
Small ²5⁄32" (20 mm)
Medium 1" (25 mm)
Large 1 ⅜" (35 mm)
Insulation sleeve / heat blanket
WELDPLAST S4
* a = Welding seam thickness
General accessories
Technical Data
Voltage V~ 230
Power W 3680
Material PE / PP
Welding rod inches (mm) ⅛ - 5⁄32 (3 - 4 mm) / 5⁄32 - ³⁄16 (4 - 5 mm)
Output lbs / hr 4.9 – 8.8
Size (L × W × H) inches 22 × 4 × 12
Weight lbs 18
Conformity mark
Protection class I
Article No.: 116.948 WELDPLAST S4, 230 V / 3680 W, ⅛ - 5⁄32" (3 – 4 mm), Euro
plug, blank welding shoe
146.813 WELDPLAST S4, 230 V / 3680 W, 5⁄32 - ³⁄16" (4 – 5 mm), Euro
plug, welding shoe K 15
Included with purchase: WELDPLAST S4, preheating nozzle large, medium and
small, storage case
98 www.leister.com
Digitally-regulated extrusion welder
WELDPLAST S2
Digitally-regulated extrusion welder
WELDPLAST S2 PVC
• Optimized for PVC-U
• Perfect weld seam quality
• PVC-specific extrusion menu
• Corrosion protection
• Standby mode
• Maintenance-free blower
• Perfect weld seam quality
• Multifunctional display
• Ergonomic and handy
• Highly used worldwide worldwide
WELDPLAST S2 / S2 PVC: The masterpieces.
WELDPLAST S2 and S2 PVC are masterpieces of modern technology. While externally, they fulfill the highest
requirements of functionality and design, their interior satisfies the highest expectations concerning the material to
be processed. The WELSDPLAST S2 PVC has integrated corrosion protection and has been especially designed
to satisfy the high requirements of PVC extrusion welding. Their perfect seam quality makes both—WELDPLAST S2
and S2 PVC—reliable partners for today and tomorrow.
Technical Data
Voltage V~ 230
Power W 3000
MaterialPE / PP
Other materials on request
Welding rod inches (mm) ⅛ - 5⁄32 (3 – 4 mm)
Output 1/8" (3 mm) lbs / hr PE: 1.3 – 2.9 | PP: 1.1 – 2.65
Output 5/32" (4 mm) lbs / hr PE: 2.2 – 4.4 | PP: 2.0 – 4.4
Size (L × W × H) inches 18 × 4 × 10
Weight lbs 13
Conformity mark
Protection class I
Article No.: 127.215 WELDPLAST S2, 230 V / 3000 W, Euro plug
Included with purchase: WELDPLAST S2, welding shoe raw part, storage case
Technical Data
Voltage V~ 230
Power W 3000
MaterialPVC-U, PE, PP
Other materials on request
Welding rod inches (mm) ⅛ - 5⁄32 (3 – 4 mm)
Output 1/8" (3 mm) lbs / hr PVC-U: 0.9 – 1.7 | PE: 0.6 – 1.3
Output 5/32" (4 mm) lbs / hr PVC-U: 1.5 – 2.7 | PE: 1.0 – 2.3
Size (L × W × H) inches 18× 4× 10
Weight lbs 13
Conformity mark
Protection class I
Article No.: 135.724 WELDPLAST S2 PVC, 230 V / 3000 W, Euro plug
Included with purchase: WELDPLAST S2 PVC, 3 preheat nozzles,
welding shoe K-8/10 (5⁄16 / ¹³⁄32") (Art. no. 146.236), storage case
99
146.239146.240
146.241146.242
146.248146.249146.243146.244
146.235146.236146.231
146.642146.644146.646146.652
146.230146.218
133.850
145.945145.946
145.896145.947145.897
145.912145.915145.907145.903145.909145.916
145.943145.944145.812145.940145.816
146.643146.645146.649146.651
145.811145.488
139.460
139.461
154.002
161.119
104
Pla
stic
Fab
ricat
ion
With the WELDPLAST S2
perfect welds are possible
The 45° angled adapter
for the WELDPLAST S2
facilitates welding in difficult
positions. (accessory)
Accessories WELDPLAST S2 Accessories WELDPLAST S2 PVC
Even inside radiuses are easy to weld.The handy WELDPLAST S2 in action.
Welding shoe complete2 ⅛" × 1 9⁄16" × 2 ¹⁄16" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank shoe
1" (25 mm) overlap
1 ⅜" (35 mm) overlap
³⁄16 / ¼" (5 / 6 mm) V-seam
5⁄16 / ¹³/32" (8 / 10 mm) V-seam
¹5⁄32" (12 mm) V-seam
¹9⁄32" (15 mm) V-seam
³⁄16 / ¼" fillet weld seam (a = 5⁄32"*)
5⁄16 / ¹³/32" fillet weld seam (a = 9⁄32"*)
¹9⁄32" fillet weld seam (a = ¹³/32"*)
Corner outside seam 5⁄16 " (8 mm)
Corner outside seam ¹³/32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam 9⁄16" (14 mm)
Corner seam ²5⁄32" (20 mm)
Top hot-air guide
* a = Welding seam thickness
* a = Welding seam thickness
Welding shoe complete1 ²5⁄32" × 1 ³⁄16" × 2 ⅛" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank welding shoe
1" (25 mm) overlap
1 ³⁄16" (30 mm) overlap
1 ⅜" (35 mm) overlap
³⁄16 / ¼" ( 5 / 6 mm) V-seam
5⁄16 / ¹³/32" (8 / 10 mm) V-seam
¹5⁄32" (12 mm) V-seam
¹9⁄32" (15 mm) V-seam
²5⁄32" (20 mm) V-seam
1" (25 mm) V-seam
³⁄16 / ¼" fillet weld (a = 5⁄32"*)
5⁄16 / ¹³/32" fillet weld (a =9⁄32")
¹9⁄32" fillet weld (a = ¹³/32"*)
²5⁄32" fillet weld (a = 9⁄16"*)
1" fillet weld (a = ¹¹/16"*)
Corner outside seam 5⁄16 " (8 mm)
Corner outside seam ¹³/32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam 9⁄16" (14 mm)
Corner seam ²5⁄32" (20 mm)
45° angled adapter
90° angled adapter
Insulation sleeve / heat blanket
WELDPLAST S2
Support clamp WELDPLAST S2
General accessories
100 www.leister.com
149.430
149.402148.627149.401
149.388149.383149.385
149.364
152.720
153.143
153.236
149.600
149.456
149.461
149.467
149.469
154.107
154.106
154.002
104
Digitally regulated extrusion welder
WELDPLAST S1 Accessories WELDPLAST S1
• Functional, ergonomic design with comfort grip areas
• Equipment-class-leading output power of 1.76 lbs/hr (HDPE)
• Integrated LED lighting and hanging point
• Can work with all typical kinds of plastic
• Multifunction panel with predefined welding parameters
• BL blower, adjustable air volume
Unattainable is weldable with the new 45° and 90°
angled adapters.
Welding shoe completeBlank
³⁄16" ⁄ ¼" (5 / 6 mm) fillet weld
5⁄16" / ¹³⁄32" (8 / 10 mm) fillet weld
¹5⁄32" (12 mm) fillet weld
¹/8" / 5/32" (3 / 4 mm) V-seam
³⁄16" / ¼" (5 / 6 mm) V-seam
5⁄16" / ¹³⁄32" (8 / 10 mm) V-seam
Corner
For additional welding shoes, seeWeldplast S2 PVC
Nozzle extension
Angled adapter 45°
Angled adapter 90°
Top hot-air guide
Hot-air tube, position 6h 9⁄16"
(14 mm)
Hot-air tube, position 6h ⅝"
(16 mm)
Hot-air tube, position 9h/3h 9⁄16"
(14 mm), standard
Hot-air tube, position 9h/3h ⅝"
(16 mm)
Air nozzle set 9⁄16" (14 mm), standard
Air nozzle set ⅝" (16 mm)
Insulation sleeve WELDPLAST S1/S2
General accessories
Technical Data
Voltage V~ 230 / 120 / 100
Power W 1600 / 1800 / 1500
MaterialHD-PE, LD-PE, PP, PVC-U
PVC-C, PVDF, ECTFE, PA
Welding rod inches (mm) ⅛ or 5⁄32 (3 or 4 mm)
Output lbs / hr 0.44 – 1.76 (PVC up to 2.53 lbs / hr)
Size (L × W × H) inches 17 × 4× 10
Integrated welding profilesHD-PE, PP, PVC-U,PVC-C, PVDF
10 free profile storage spaces
Weight lbs 10
Conformity mark
Protection class I
Article No.: 148.396 WELDPLAST S1, 230 V / 1600 W, ⅛ - 5⁄32" (3 – 4 mm), Euro plug
148.395 WELDPLAST S1, 120 V / 1800 W, ⅛ - 5/32" (3 – 4 mm),
without plug
Included with purchase: WELDPLAST S1, user manual, 4 pre-heating nozzles
9⁄16" (14 mm), K10 welding shoe, storage case
WELDPLAST S1: Outstandingly compact.With the new WELDPLAST S1 compact extruder, you
can achieve perfect seam quality
101
Pla
stic
Fab
ricat
ion
Analog extrusion welder
FUSION 3
FUSION 3: Long and slim.
With its long and narrow shape, the FUSION 3 enables
comfortable work, even on the floor.
• High-quality welding performance
• Compact and handy
• Motor start-up protection prevents cold start
• Simple operation
• Dual-sided twist-free wire intake
• 360° rotating welding shoe
Analog extrusion welder
FUSION 3C
FUSION 3C: Short and handy.
The somewhat shorter FUSION 3C provides an as-
tounding output volume of up to 8 lbs per hour.
• High-quality welding performance
• Compact and handy
• Motor start-up protection prevents cold start
• Simple operation
• Dual-sided, twist-free wire intake
• 360° rotating welding shoe
Technical Data Version Version
⅛ - 5⁄32 (3-4mm) 5⁄32 - ³⁄16 (4 - 5mm)
Welding rod inches ⅛ 5⁄32 5⁄32 ³⁄16
Output PE lbs / hr 4.4 – 5.5 5.9 – 7.9 4.6 – 5.7 5.9 – 7.9
Output PP lbs / hr 4.0 – 5.0 5.5 – 7.5 4.0 – 5.3 5.5 – 7.5
Voltage V~ 230
Power W 3500
Material PE / PP
Size (L × W × H) inches 26 × 4 × 7
Weight lbs 16
Conformity mark
Protection class II
Article No.: 118.300 FUSION 3, 230 V / 3500 W, welding rod ⅛ – 5⁄32" (3 - 4 mm), Euro plug
144.615 FUSION 3, 230 V / 3500 W, welding rod 5⁄32 – ³⁄16" (4 - 5 mm), Euro plug
Included with purchase: FUSION 3, welding show overlap 1.18 inch, storage case
Technical Data Version Version
⅛ - 5⁄32 (3-4mm) 5⁄32 - ³⁄16 (4 - 5mm)
Welding rod inches ⅛ 5⁄32 5⁄32 ³⁄16
Output PE lbs / hr 4.4 – 5.5 5.9 – 7.9 4.6 – 5.7 5.9 – 7.9
Output PP lbs / hr 4.0 – 5.0 5.5 – 7.5 4.0 – 5.3 5.5 – 7.5
Voltage V~ 230
Power W 3200
Material PE / PP
Size (L × W × H) inches 23 × 4 × 9
Weight lbs 15
Conformity mark
Protection class II
Article No.: 123.866 FUSION 3C, 230 V / 3200 W, welding rod ⅛ - 5⁄32" (3 - 4 mm), Euro plug
144.826 FUSION 3C, 230 V / 3200 W, welding rod 5⁄32 - ³⁄16" (4 - 5 mm), Euro plug
Included with purchase: FUSION 3C, blank welding shoe, storage case
102 www.leister.com
145.945145.946
145.896145.947145.897
145.912145.915145.907145.903145.909145.916
145.943145.944145.812145.940145.816
146.643146.645146.649146.651
145.811145.488
148.817
148.816
149.421
149.420
104
Accessories FUSION 3 / 3C
FUSION 3C during the welding of a V-seam.Perfectly stored in the case.
* a = Welding seam thickness
Welding shoe complete1 ²5⁄32" × 1 ³⁄16" × 2 ⅛" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank welding shoe
1" (25 mm) overlap
1 ³⁄16" (30 mm) overlap
1 ⅜" (35 mm) overlap
³⁄16 / ¼" ( 5 / 6 mm) V-seam
5⁄16 / ¹³/32" (8 / 10 mm) V-seam
¹5⁄32" (12 mm) V-seam
¹9⁄32" (15 mm) V-seam
²5⁄32" (20 mm) V-seam
1" (25 mm) V-seam
³⁄16 / ¼" fillet weld (a = 5⁄32"*)
5⁄16 / ¹³/32" fillet weld (a =9⁄32")
¹9⁄32" fillet weld (a = ¹³/32"*)
²5⁄32" fillet weld (a = 9⁄16"*)
1" fillet weld (a = ¹¹/16"*)
Corner outside seam 5⁄16 " (8 mm)
Corner outside seam ¹³/32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam 9⁄16" (14 mm)
Corner seam ²5⁄32" (20 mm)
45° angled adapter
90° angled adapter
Insulation sleeve / heat blanket
FUSION 3
Insulation sleeve / heat blanket
FUSION 3C
The insulation sleeve, or heat blanket, protects the machine
from heat loss, as well as protects the operator from direct
contact with the extruder barrel.
General accessories
103
145.945145.946
145.896145.947145.897
145.912145.915145.907145.903
145.943145.944145.812
146.643146.645146.649146.651
145.811145.488
147.602
147.601
104
Pla
stic
Fab
ricat
ion
• At 18 inches, it is the shortest in its performance class!
• Motor start-up protection prevents cold start
• Simple operation
• Dual-sided, twist-free wire intake
• 360° rotating welding shoe
• Integrated electronics for stepless adjustment of the
preheating temperature and output quantity
Analog extrusion welder
FUSION 2 Accessories FUSION 2
In operation during container construction in China.
FUSION 2: The small powerhouse.
The FUSION 2 convinces with its ergonomic design.
The simple operation and first-class welding quality
have helped it to become the breakthrough product.
Welding shoe complete1 ²5⁄32" × 1 ³⁄16" × 2 ⅛" blank shoe
2 ²9⁄32" × 2" × 2 9⁄32" blank welding shoe
1" (25 mm) overlap
1 ³⁄16" (30 mm) overlap
1 ⅜" (35 mm) overlap
³⁄16 / ¼" ( 5 / 6 mm) V-seam
5⁄16 / ¹³/32" (8 / 10 mm) V-seam
¹5⁄32" (12 mm) V-seam
¹9⁄32" (15 mm) V-seam
³⁄16 / ¼" fillet weld (a = 5⁄32"*)
5⁄16 / ¹³/32" fillet weld (a =9⁄32")
¹9⁄32" fillet weld (a = ¹³/32"*)
Corner outside seam 5⁄16 " (8 mm)
Corner outside seam ¹³/32" (10 mm)
Corner outside seam ¹5⁄32" (12 mm)
Corner outside seam ¹9⁄32" (15 mm)
Corner seam 9⁄16" (14 mm)
Corner seam ²5⁄32" (20 mm)
45° angled adapter
90° angled adapter
* a = Welding seam thickness
General accessories
Technical Data
Voltage V~ 230 / 120
Power W 2800
Material PE / PP
Air temperature °F up to 640
Plastification temperature °F up to 570
Welding rod inches (mm) 5⁄32 (4 mm)
Output PE lbs / hr 2.9 – 4.0
Size (L × W × H) inches 18 × 4 × 10
Weight lbs 13
Conformity mark
Protection class II
Article No.: 150.102 FUSION 2, 120 V / 2800 W, CEE plug
119.200 FUSION 2, 230 V / 2800 W, Euro plug
Included with purchase: FUSION 2, blank welding shoe, storage case
104 www.leister.com
131.451
148.923
160.454
136.231
134.361
143.776
135.082
155.829
153.009
152.676
144.095
116.367123.173119.540
154.259
154.026
134.567109.984
113.268123.561149.265149.529149.530151.026
The WELDPLAST S4 during outdoor use in Spain.Draw welding on a PE-container with the DIODE PID.
General accessories hand extruder
Tool restWELDPLAST S2 / S2 PVC / FUSION 2
FUSION 3C
WELDPLAST S1
WELDPLAST S4 / WELDPLAST S6 /
FUSION 3
Pre-heat reflectorWELDPLAST S1/S2 / S2 PVC / S4 / S6
FUSION 2 / 3 / 3C
Air filter WELDPLAST S1 / S2 / S2
PVC (included with purchase)
Textile dust filter WELDPLAST S1 / S2
PVC (in combination with Air filter)
(not included with purchase)
Air filter FUSION 2 / 3C
Air filter WELDPLAST S2
Corner Press Tool
Welding Gauge
Welding rod de-reeler
Storage case (included with purchase)
WELDPLAST S6
WELDPLAST S4 / FUSION 3
WELDPLAST S2 / S2 PVC / S1 /
FUSION 2/ 3C
PLASTFIX lends the weld seam the necessary holding pressure.
Scraper blade
Contour scraper
Heating element230 V / 2600 W, WELDPLAST S6
230 V / 2200 W, WELDPLAST S4 /
S2 / S2 PVC
230 V / 1100 + 1100 W, FUSION 3
230 V / 1750 W, FUSION 2 / 3C
230 V / 1000 W, WELDPLAST S1
120 V / 1100 W, WELDPLAST S1
100 V / 1050 W, WELDPLAST S1
120 V / 1750 W, FUSION 2
105
104.297 A
104.298 A
104.313 A
104.308 A
106.654 C
106.642 A
104.304 A
104.303 A
107.036
A
107.037
A
107.040
C
104.283 A
104.294 A
104.284 B
104.299 B
106.650 C
104.300 A
161.612 D
104.287 A
104.301 A
104.288 B
126.356 C
161.611 D
104.296 A
104.278 A
106.641 A
104.280 B
104.279 B
104.302 A
104.295 A
113.587 A
107.027 C
3.7
5.7
5
7
28
4
Pla
stic
Fab
ricat
ion
Welding rods
Article
Pro
file
Colo
ur
lbs
Welding accessories div.
PA welding rod 6.6
PC welding rod 6.6
PC welding rod / ABS / ALPHA (Honda) 6.6
PUR welding rod 6.6
Xenoy welding band 4.4
PPs welding rod, flame resistant 6.6
PVDF welding rod 6.6
POM welding rod 6.6
Test bundles
Test bundle bodywork welding rods, each consisting of
profile A pieces of 14.6" single marked
6x HDPE, 6x PP, 6x PA, 6x PC, 6x ABS, 6x PCABS / APLHA Honda,
6x PC / PBTP / Xenoy
Test bundles standard each consisting of
profile A pieces of 14.6"single marked
5x PVC-U, 5x PVC-P, 5x PP, 5x ABS, 5x HDPE, 3x PC, 3x PA,
3x POM, 3x LDPE, 3x PC / ABS / ALPHA Honda,
3x PC / PBTP / Xenoy
Test bundle welding band each consisting of
profile A pieces of 14.6" single marked
9x HDPE, 8x ³⁄32" white, 9x PP, 8x ³⁄32" natural, 9x ABS,
8x ³⁄32" white, 9x PC / PBTP / Xenoy grey
ArticleP
rofil
e
Colo
ur
lbs
Welding accessories PE
HDPE welding rod 6.6
HDPE welding rod 6.6
HDPE welding rod 11
HDPE welding rod 11
HDPE welding band 2.2
LDPE welding rod 6.6
HDPE welding rod 4.4
Welding accessories PP
PP welding rod 6.6
PP welding rod 6.6
PP welding rod 11
PP welding band 4.4
PP welding rod 4.4
Welding accessories PVC
PVC-U welding rod (hard) 6.6
PVC-U welding rod (hard) 6.6
PVC-U welding rod 6.6
PVC-U welding rod (hard) 11
PVC-U welding rod (hard) 11
PVC-P welding rod (soft) 6.6
Welding accessories ABS
ABS welding rod 6.6
ABS welding rod 6.6
ABS welding band 2.2
³⁄165⁄32
7⁄32 9⁄32
Profile sizesDimensions in inches
Profile A Profile B Profile C Profile D
³⁄32
5⁄16
107
108
109
110 / 111
112
113
114
115
12 – 15
13 – 15
16 / 17
18 / 19
20 / 21
34 / 35
Floo
ring
/ In
terio
r D
ecor
atio
n
Flooring / Interior Decoration
Product overview
Floor welding procedures
MINIFLOOR Drive Unit
UNIFLOOR E / UNIFLOOR S
GROOVER
GROOVY
General accessories
Hot-Air Hand Tools
TRIAC ST
TRIAC AT
ELECTRON ST
HOT JET S
GHIBLI AW
General accessories
Promotes the life of the floor.
Suitable for aseptic applications.
Suitable for frequent cleaning.
108 www.leister.com
114 113 110 / 111 112
Close loop SystemMit der close loop Technik werden die Parameter auch bei Spannungsschwankungen permanent konstant gehalten um eine siche-re Schweissung in Baustellenumgebung zu ermöglichen.
Closed loop System (Geregelt) Open loop System (Gesteuert)
Geräte-Typ GROOVY GROOVER MINIFLOOR UNIFLOOR
HauptanwendungHanfugenhobel für elastische Bodenbeläge
Fugenfräse für elastische Bodenbeläge
Antriebseinheit für das Verschweissen
der elastischen Bodenbeläge
Schweissautomat für das Verschweissen
der elastischen BodenbelägeFugenbreite mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Fugentiefe mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Geschwinigkeit m/min - Stufe 1 (Linoleum)4 - 6
Stufe 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Temperatur °C - - 40 - 620 (mit TRIAC AT) 80 - 620Luftmenge % - - 20 - 100 (mit TRIAC AT) 50 - 100Spannung V - 120 / 230 100 - 230 120 / 230Frequenz Hz - 50 / 60 50 / 60 50 / 60
Leistungsaufnahme W - Stufe 1 (Linoleum)350
Stufe 2 (PVC, TPU, PU)700
Antriebseinheit5
mit TRIAC AT1605 2300
Gewicht kg 0.29 6.7 5.3 6.6 11.5Abmessung mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215Kabellänge m - 3 3 3Startparameter*Materialien Linoleum (Stufe 1) PVC, TPU, PU (Stufe 2) Linoleum PVC, TPU, PU Linoleum PVC, TPU, PUGeschwinigkeit m/min - 5 10 1.5 1.5 3 3Temperatur °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Luftmenge % - - - 100% 100% 100% 100%
Katalogseite
*Die aufgeführten Parameter sind lediglich Richtwerte (Raumtemperatur 20°C). Eine Testschweissung unter Berücksichtigung der Materialherstellerangaben ist unabdingbar.
Übersicht
Gerätewahl
Boden
Closed-loop systemThe closed-loop technology means that the parameters are kept constant at all times, even in the event of voltage fluctuations, enab-ling reliable welding in the building site environment.
Closed loop System Open loop System
Typ GROOVY GROOVER MINIFLOOR UNIFLOOR
Area of applicationGouging tool for
elastic floor coverings
Grooving machine for elastic floor coverings
Drive unit for welding elastic floor coverings
Welder for welding elastic floor coverings
Groove wide mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Groove depth mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Speed m/min - Phase 1 (Linoleum)4 - 6
Phase 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Temperature °C - - 40 - 620 (with TRIAC AT) 80 - 620Air flow range % - - 20 - 100 (with TRIAC AT) 50 - 100Voltage V - 120 / 230 100 - 230 120 / 230Frequenz Hz - 50 / 60 50 / 60 50 / 60
Power W - Phase 1 (Linoleum)350
Phase 2 (PVC, TPU, PU)700
drive unit5
with TRIAC AT1605 2300
Weight kg 0.29 6.7 5.3 6.6 11.5Size mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215Cable length m - 3 3 3Startup parameters*Materials Linoleum (Phase 1)PVC, TPU, PU (Phase 2) Linoleum PVC, TPU, PU Linoleum PVC, TPU, PUSpeed m/min - 5 10 1.5 1.5 3 3Temperature °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Air flow range % - - - 100% 100% 100% 100%
Catalog page
*The parameters listed are purely reference values (room temperature 20°C). A test weld which takes into account the information provided by the material manufacturer is absolutely essential.
Overview Flooring
Closed-loop systemClosed-loop technology means that the parameters are kept constant at all times, even in the event of voltage fluctuations, enabling reliable welding in the building site environment.
Closed-Loop System Open Loop System
Type GROOVY GROOVER MINIFLOOR UNIFLOOR
Area of applicationGouging tool for
plastic floor coverings
Grooving machine for plastic floor coverings
Drive unit for welding plastic floor coverings
Welder for welding plastic floor coverings
Groove wide inch 0.1 / 0.14 0.1 / 0.11 / 0.14 / 0.16 0.1 - 0.16 0.1 - 0.16Groove depth inch 0.02 - 0.1 0.0 - 0.16 0.1 - 0.16 0.1 - 0.16
Speed ft/min - Phase 1 (Linoleum)13 - 19
Phase 2 (PVC, TPU, PU)26 - 39 1.6 - 14 3.3 – 24.6
Temperature °F - - 104 - 1148 (with TRIAC AT) 176 - 1148Air flow range % - - 20 - 100 (with TRIAC AT) 50 - 100Voltage V - 120 / 230 100 - 230 120 / 230Frequenz Hz - 50 / 60 50 / 60 50 / 60
Power W - Phase 1 (Linoleum)350
Phase 2 (PVC, TPU, PU)700
drive unit5
with TRIAC AT1605 2300
Weight lbs 0.64 14.7 11.6 14.5 25Size inch 7 × 2 × 4 9 × 8 × 10 12 x 9 x 10 20 x 9 x 12 17 × 11 × 9Cable length ft - 10 10 10Startup parameters*Materials Linoleum (Phase 1)PVC, TPU, PU (Phase 2) Linoleum PVC, TPU, PU Linoleum PVC, TPU, PUSpeed ft/min - 16 32 4.9 4.9 9.8 9.8Temperature °F - - - 752 - 842 932 - 1022 752 - 842 932 - 1022Air flow range % - - - 100% 100% 100% 100%
Catalog page
*The parameters listed are purely reference values (room temperature 20°C / 68°F). A test weld, which takes into account the information provided by the material manufacturer, is absolutely essential.
Overview Flooring
闭环系统凭借闭环技术,即使电压发生波动时也能保持参数的持久恒定状态,从而确保施工现场的安全焊接。
闭环系统 开环系统
型号 GROOVY GROOVER MINIFLOOR UNIFLOOR
应用领域 用于弹性地板的手刨 用于弹性地板的开槽机 焊接弹性地板的驱动单元 焊接弹性地板的自动焊接设备
溝寬 mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0槽深 mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
驱动速度 m/min - 1級 (亚麻地板)4 - 6
2級 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
温度 °C - - 40 - 620 (同 TRIAC AT) 80 - 620空气量范围 % - - 20 - 100 (同 TRIAC AT) 50 - 100电压 V - 120 / 230 100 - 230 120 / 230频率 Hz - 50 / 60 50 / 60 50 / 60
功率 W - 1級 (亚麻地板)350
2級 (PVC, TPU, PU)700
驅動單元5
同 TRIAC AT1605 2300
重量 kg 0.29 6.7 5.3 6.6 11.5尺寸 mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245495 x 225 x 295 420 x 270 x 215電纜長度 m - 3 3 3啟動參數*物料 亚麻地板 (1級) PVC, TPU, PU (2級) 亚麻地板 PVC, TPU, PU 亚麻地板 PVC, TPU, PU速度 m/min - 5 10 1.5 1.5 3 3温度 °C - - - 400 - 450 500 - 550 400 - 450 500 - 550空气量范围 % - - - 100% 100% 100% 100%本书页码
*所列出参数均仅为参考值(室温 20°C)。必须根据材料制造商所提供的数据进行一次测试焊接。
地板工具產品清單
閉ループシステム建設現場の環境において安全な溶接を可能にするため、パラメータは電圧変動の場合であっても閉ループ技術により恒久的に一定に保たれます。
Closed loop System Open loop System
機種 GROOVY GROOVER MINIFLOOR UNIFLOOR
適用範囲 弾力性床材の共同成形品 弾力性床材用グルービングマシン 弾力性床材の溶接用ドライブ
ユニット 弾力性床材の溶接用溶接機
広い溝 mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0深溝 mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
速度 m/min - レベル1 (リノリウム)4 - 6
レベル2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
温度 °C - - 40 - 620 (とともに TRIAC AT) 80 - 620風量レンジ % - - 20 - 100 (とともに TRIAC AT) 50 - 100電圧 V - 120 / 230 100 - 230 120 / 230周波数 Hz - 50 / 60 50 / 60 50 / 60
出力 W - レベル1 (リノリウム)350
レベル 2 (PVC, TPU, PU)700
ドライブユニット5
とともに TRIAC AT1605 2300
重量 kg 0.29 6.7 5.3 6.6 11.5寸法 mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215ケーブル長 m - 3 3 3起動パラメータ*材料 リノリウム(レベル1) PVC, TPU, PU (レベル12) リノリウム PVC, TPU, PU リノリウム PVC, TPU, PU速度 m/min - 5 10 1.5 1.5 3 3温度 °C - - - 400 - 450 500 - 550 400 - 450 500 - 550風量レンジ % - - - 100% 100% 100% 100%カタログページ
*記載されているパラメータは近似値です (室温 20°C)。材料メーカーの指示を考慮した溶接試験が不可欠です。
製品リストの床
Closed loop SystemMet de close loop-techniek worden de parameters ook bij spanningsfluctuaties permanent constant gehouden om een veilige las-procedure op bouwplaatsen mogelijk te maken.
Closed loop System Open loop System
Type apparaat GROOVY GROOVER MINIFLOOR UNIFLOOR
ToepassingsgebiedHandvoegenschaaf
voor elastische vloerbedekkingen
Voegenfrees voor elastische vloerbedekkingen
Aandrijfmodule voor het lassen van elastische vloerbedekkingen
Lasautomaat voor het lassen van elastische vloerbedekkingen
Voegbreed mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Voegdiepte mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Snelheid m/min - Level 1 (Linoleum)4 - 6
Level 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Temperatuur °C - - 40 - 620 (met TRIAC AT) 80 - 620Luchthoeveelheid % - - 20 - 100 (met TRIAC AT) 50 - 100Spanning V - 120 / 230 100 - 230 120 / 230Frequentie Hz - 50 / 60 50 / 60 50 / 60
Vermogen W - Level 1 (Linoleum)350
Level 2 (PVC, TPU, PU)700
Aandrijfeenheid5
met TRIAC AT1605 2300
Gewicht kg 0.29 6.7 5.3 6.6 11.5Grootte mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215Kabellengte m - 3 3 3Startup parameters*Materialen Linoleum (Level 1) PVC, TPU, PU (Level 2) Linoleum PVC, TPU, PU Linoleum PVC, TPU, PUSnelheid m/min - 5 10 1.5 1.5 3 3Temperatuur °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Luchthoeveelheid % - - - 100% 100% 100% 100%
Catalogus Pagina
*De vermelde parameterwaarden zijn richtwaarden (kamertemperatuur 20 °C). Wij adviseren u dringend een testlas te maken waarbij u dan rekening moet houden met de door de fabrikant verstrekte materiaalgegevens.
Overzicht
Vloeren
Closed loop SystemGrâce à la technique « close loop », les paramètres sont également maintenus constants lors des fluctuations de tension, et ce, afin de garantir un soudage sûr dans l'environnement de chantier.
Closed loop System Open loop System
Type d’appareil GROOVY GROOVER MINIFLOOR UNIFLOOR
ApplicationsGougeur à main pour les revêtements de
sol souples
Fraiseuse à joints pour les revêtements de sol souples
Unité de commande pour le soudage des revêtements de sol souples
Soudeuse automatique pour le sou-dage des revêtements de sol souples
Large joint mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Profondeur joint mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Vitesse m/min - Etape 1 (Linoléum)4 - 6
Etape 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Température °C - - 40 - 620 (avec TRIAC AT) 80 - 620Plage de débit d’air % - - 20 - 100 (avec TRIAC AT) 50 - 100Tension V - 120 / 230 100 - 230 120 / 230Fréquence Hz - 50 / 60 50 / 60 50 / 60
Puissance W - Etape 1 (Linoléum)350
Etape 2 (PVC, TPU, PU)700
Unité d'entraînement5
avec TRIAC AT1605 2300
Poids kg 0.29 6.7 5.3 6.6 11.5Dimensions mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215Longueur du câble m - 3 3 3Paramètres de démarrage*Matériels Linoléum (Etape 1)PVC, TPU, PU (Etape 2) Linoléum PVC, TPU, PU Linoléum PVC, TPU, PUVitesse m/min - 5 10 1.5 1.5 3 3Température °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Plage de débit d’air % - - - 100% 100% 100% 100%
Page du catalogue
*Les paramètres mentionnés sont fournis uniquement à titre indicatif (température ambiante : 20 °C). Un soudage d’essai en respectant les indications du fabricant du matériau est indispensable.
Vue d’ensemble Sols
Sistema closed loopCon la tecnica close loop i parametri rimangono costanti anche in caso di fluttuazioni di tensione, al fine di permettere una saldatura sicura nell'area cantiere.
Sistema Closed loop Sistema Open loop
Tipo di apparecchio GROOVY GROOVER MINIFLOOR UNIFLOOR
Campo d'impiegoSgorbia manuale
per rivestimenti per pavimenti resilienti
Fresa per fughe per rivestimenti per pavimenti resilienti
Unità di azionamento per la saldatura per rivestimenti di pavimenti resilienti
Dispositivo automatico di saldatura per rivestimenti di pavimenti resilienti
Larghezza fuga mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Profondità fuga mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Celerità di trasmissione m/min - Livello 1 (Linoleum)4 - 6
Livello 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Temperatura °C - - 40 - 620 (con TRIAC AT) 80 - 620Gamma di quantità dell'aria % - - 20 - 100 (con TRIAC AT) 50 - 100Tensione V - 120 / 230 100 - 230 120 / 230Frequenza Hz - 50 / 60 50 / 60 50 / 60
Potenza W - Livello 1 (Linoleum)350
Livello 2 (PVC, TPU, PU)700
Unità di aziona-mento 5
con TRIAC AT1605 2300
Peso kg 0.29 6.7 5.3 6.6 11.5Dimensioni mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215Lunghezza del cavo m - 3 3 3Parametri di avvio*Materiale Linoleum (Livello 1)PVC, TPU, PU (Livello 2) Linoleum PVC, TPU, PU Linoleum PVC, TPU, PUCelerità di trasmissione m/min - 5 10 1.5 1.5 3 3Temperatura °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Gamma di quantità dell›aria % - - - 100% 100% 100% 100%
Pagina catalogo
*I parametri elencati sono solo valori orientativi (temperatura ambiente 20°C). Una saldatura di prova tenendo conto dei dati del fabbricante dei materiali è imprescindibile.
Panoramica Pavimenti
Closed loop SystemGracias a la tecnología close loop, los parámetros se mantienen constantes permanentemente, incluso con variaciones de tensión, para así hacer posible una soldadura segura en el entorno del equipo.
Closed loop System Open loop System
Tipo GROOVY GROOVER MINIFLOOR UNIFLOOR
Ámbito de aplicaciónCepillo acanalador
manual para revesti-mientos de suelo
elásticos
Fresadora de ranuras para revestimientos de suelo elásticos
Dispositivo de guía para soldadura de revestimientos de suelo elásticos
Dispositivo automático para soldadura de revestimientos de
suelo elásticosAncha de la hendidura mm 2.5 / 3.5 2.5 / 2.8 / 3.5 / 4.0 2.5 - 4.0 2.5 - 4.0Profundidad de la hendidura mm 0.5 - 2.5 0.0 - 4.0 2.5 - 4.0 2.5 - 4.0
Velocidad m/min - Nivel 1 (Linóleo)4 - 6
Nivel 2 (PVC, TPU, PU)8 - 12 0.5 - 4.5 1.0 - 7.5
Temperatura °C - - 40 - 620 (con TRIAC AT) 80 - 620Gama de caudal de aire % - - 20 - 100 (con TRIAC AT) 50 - 100Tensión V - 120 / 230 100 - 230 120 / 230Frecuencia Hz - 50 / 60 50 / 60 50 / 60
Potencia W - Nivel 1 (Linóleo)350
Nivel 2 (PVC, TPU, PU)700
Unidad de accio-namiento 5
con TRIAC AT1605 2300
Peso kg 0.29 6.7 5.3 6.6 11.5Dimensiones mm 180 x 42 x 92 240 x 205 x 255 310 x 225 x 245 495 x 225 x 295 420 x 270 x 215La longitud del cable m - 3 3 3Parámetros de inicio*Materiales Linóleo (Nivel 1) PVC, TPU, PU (Nivel 2) Linóleo PVC, TPU, PU Linóleo PVC, TPU, PUVelocidad m/min - 5 10 1.5 1.5 3 3Temperatura °C - - - 400 - 450 500 - 550 400 - 450 500 - 550Gama de caudal de aire % - - - 100% 100% 100% 100%
Página
*Los parámetros indicados son valores de referencia (temperatura ambiente 20°C). Es indispensable realizar una soldadura de prueba prestando atención a los datos del fabricante de material.
Vista general Pisos
109
Floo
ring
and
Inte
rior
Dec
orat
ion
Step 1: Milling the groove
with the GROOVER.
Step 2: Inserting the welding rod into
the groove with the
UNIFLOOR E hot-air welder.
Step 3: Remove the excess welding
rod with trimmer guide
and spatula
Step 4: Leveling the protruding
welding rod with the spatula.
Procedures for welding floor coverings
110 www.leister.com
1
2
3
4
5
6
1
3
4
5
2
MINIFLOOR – effizient und erschwinglich für jedermann!
Die MINIFLOOR Drive Unit macht aus Ihrem Heissluft Handgerät in wenigen Sekunden einen MINIFLOOR Heiss-
luft Schweissautomaten. Das erhöht die Schweissqualität, erleichtert die Arbeit und reduziert den Zeitaufwand
erheblich. Sein Einsatz lohnt sich bereits ab Schweissnahtlängen von 1.20 m und dank seines geringen Gewichts
(5.3 kg) lässt er sich mühelos transportieren. Der MINIFLOOR schweisst randabfahrend, nahtlos und dies nahezu
Heissluft Schweissautomat
MINIFLOOR
Rückwärtskompatibel: Auch ältere TRIAC-Modelle können dank Wechse-leinsätzen problemlos angeschlossen werden.
Werkzeuglose Montage / Demontage des De-reelers: Falls der de-reeler nicht eingesetzt werden kann, kann der Schweissdraht trotzdem kontrolliert in die Schnell-schweissdüse geführt werden.
Unglaublich schnell: Trotz seines geringen Gewichts bietet der MINIFLOOR eine Schweissgeschwin-digkeit von rund 2 m/min, was nahezu einer Verdoppelung gegenüber der Schweissgeschwindigkeit beim Hand-schweissen entspricht.
Der Schnell-Klemmverschluss für die TRIAC-Halterung erlaubt eine Montage bzw. Demontage des TRIAC innert weniger Sekunden. Die Stromversorgung für das Handgerät ist in der MINIFLOOR Drive Unit integriert, wie auch die Möglichkeit das Kabel zu fixieren.
Integrierter Anfahrsensor: Mit der individuell einstellbaren Anfahr- Verzögerung an der MINIFLOOR- Fahreinheit (Drive Unit) lässt sich das Anfahren jederzeit den persönlichen Bedürfnissen anpassen. Dabei sorgt der lange Führungsarm für hervorra-gende Spurtreue.
Der minimale Wandabstand von nur 51 mm sorgt für problemloses Verschweissen von gängigen Hohlkeh-len oder auch Hochzügen. Die kom-pakte niedrige Bauhöhe ermöglicht durchgängiges Schweissen bereits ab 295 mm tiefen Durchgängen.
MINIFLOOR – efficient and affordable for everyone!
The MINIFLOOR turns your hot-air hand tool into an automatic welder within seconds; increases the weld quality,
facilitates work, and reduces time considerably. Its use is worthwhile from weld lengths of 1.20 m/4 ft., and thanks
to its lightweight design of 5.3 kg/12 lbs., the MINIFLOOR can be transported effortlessly.
Hot-air welder
MINIFLOOR
Reverse compatibility: Thanks to the interchangeable inserts, even older TRIAC models can be connected without a hitch.
Tool-free assembly of the de-reeler: even if the de-reeler is missing you may count on hassle-free handling, as well as smooth feeding of the welding rod into the “air-slide” of the speed welding nozzle.
Incredibly fast: Despite its light-weight design, the MINIFLOOR offers a welding speed of about 2 m/6.5 ft per minute, nearly double the speed of manual welding.
The quick-lock fastening system at the clamp allows for assembling / dismantling of the TRIAC in a matter of seconds. The power supply for the hand tool is integrated in the MINIFLOOR drive unit and you have the possibility to securely fasten the cable.
The individually-adjustable, start-up delay of the MINIFLOOR drive unit enables modificiation of the startup according to individual needs. The long guide ensures outstanding precision along the seam.
The 51 mm/2 inches minimum distance from the wall, ensures trouble-free welding around cons-truction pipes and L-skirts. Due to its compact height, the MINIFLOOR seamlessly welds beneath obstacles with a minimum clearance of 295 mm /12 inches.
MINIFLOOR – efficient and affordable for everyone!
The MINIFLOOR turns your hot-air hand tool into an automatic welder within seconds; increases the weld quality,
facilitates work, and reduces time considerably. Its use is worthwhile from weld lengths of 1.20 m (4 ft.), and thanks
to its lightweight design of 5.3 kg (12 lbs.), the MINIFLOOR can be transported effortlessly.
Hot-air welder
MINIFLOOR
Reverse compatibility: Thanks to the interchangeable inserts, even older TRIAC models can be connected without a hitch.
Tool-free assembly of de-reeler: Even if the de-reeler is missing you may count on hassle-free handling, as well as smooth feeding of the welding rod into the “air-slide” of the speed welding nozzle.
Incredibly fast: Despite its light-weight design, the MINIFLOOR offers a welding speed of about 2 m/6.5 ft per minute, nearly double the speed of manual welding.
Quick-lock fastening system: This system allows for attaching / detach-ing of the TRIAC in a matter of sec-onds. The power supply for the hand tool is integrated into the MINIFLOOR drive unit and allows the possibility of securely fastening the cable.
The individually-adjustable, start-up delay: Enables modificiation of the startup according to individual needs. The long guide ensures outstanding precision along the seam.
51 mm/2 inches minimum distance from the wall: Ensures trouble-free welding around construction pipes and L-skirts. Due to its compact height, the MINIFLOOR seamlessly welds beneath obstacles with a minimum clearance of 295 mm (12 inches).
MINIFLOOR – 为每个人提供低价优的服务!
在短短几分钟内,MINIFLOOR Drive Unit(行驶单元)就能将手持式热风焊枪转变成 MINIFLOOR 自动焊接设备。这样会提高焊接质量,便于作业并且减少用工时间。在焊缝长度超过 1.20 m 后,该单元就大有用武之地,而且由于重量轻 (5.3 kg),可以轻松地搬运。热风自动焊接机MINIFLOOR是短接合缝、小型工地的理想选择。
自动焊接设备热气
MINIFLOOR向下兼容:即使采用较早版本的 TRIAC 型号,也能借助可更换的插接件轻而易举地连接。
安装/拆卸焊条绕线盘无需工具: 即使无法使用焊条绕线盘,也仍可将焊条受控地装到快速焊接风嘴上。
超乎想象的迅速:尽管 MINIFLOOR 的重量很小,但是焊接速度约 2 m/min,几乎相当于手动焊接速度的两倍。
TRIAC 支架的快速锁闭件可使 TRIAC 在短短几秒内完成装卸热风焊枪的电源取自MINIFLOOR驱动单元,焊枪的电源线可以固定。
可调式启动传感器:借助 MINIFLOOR 行驶单元上可单独调节的启动延迟功能,启动可根据个人需求随时进行调整。此外,修长的导向臂确保精确地沿着焊缝运行。
最小墙距只有 51 mm,这样保证在常见内角倒圆或踢脚线上焊接也毫无困难。紧凑且低矮的结构高度可实现深度为 295 mm 以上通道的连续焊接。
ミニフロア – 効率よくリーズナブルな自動溶接機!
ミニフロア駆動ユニットにより、お手持ちのハンド熱風機があっという間にミニフロア熱風自動溶接機に変身。溶接のクオリティが一気にアップするだけでなく、使い方も簡単で作業時間を大幅に削減できます。長さ1.2 m以上の溶着でもすでに威力を発揮し、軽量(5.3 kg)なので持ち運びも楽々。ミニフロアでは端から溶着を開始できるため継ぎ目もできず、手作業時に比べて
熱風自動溶接機
ミニフロア後方互換性あり:ゴム製アダプターで旧モデルのトリアックも簡単に接続できます。
巻取機の取り付け / 取り外しに工具は不要: 巻取機を使用できない場合でも、溶接棒を一定の速度でスピード溶接ノズルに送ることができます。
超高速:軽量なだけでなく、ミニフロアの溶接速度は約2 m/分にも上り、手作業に比べてほぼ倍速での溶着が可能です。
クランプでトリアックを簡単に固定できるため、トリアックの取り付け / 取り外しも一瞬で終了。また、ハンド熱風機の電源が ミニフロア駆動ユニットに内蔵されているほか、ケーブルもまとめてユニットに固定できるようになっています。
発進センサー内蔵:ミニフロア駆動ユニットの発進は個別に調整できるようになっており、状況に応じていつでも発進のタイミングを設定できます。さらに、長いガイドローラーのおかげでズレも生じません。
壁との最小間隔51 mmで壁際の平縁や傾斜面の溶着も楽々。コンパクトな低位置設計により、深さ295 mmからコンスタントな溶接が可能です。
MINIFLOOR - efficiënt en betaalbaar voor iedereen!
De MINIFLOOR maakt van uw hetelucht handgereedschap in een handomdraai een volautomatische lasautomaat;
verhoogt de laskwaliteit, vergemakkelijkt het werk en vermindert de arbeidsduur aanzienlijk. Vanaf 1 meter laslengte
is het al de moeite waard om deze lasautomaat in te zetten. Dankzij het functionele ontwerp en lage gewicht
(5,3 kg) kan de MINIFLOOR moeiteloos naar de volgende klus worden gedragen.
Hetelucht lasautomaat
MINIFLOOR
Compatibiliteit: Dankzij de verwissel-bare inlegschalen, kunnen ook oudere TRIAC modellen zonder probleem worden aangesloten.
Gereedschap is niet nodig voor montage van de haspel: zelfs als de haspel ontbreekt kunt u de automaat probleemloos gebruiken en wordt de lasdraad makkelijk door het snellas-mondstuk geleid.
Bijzonder snel: mede dankzij het lage gewicht. De MINIFLOOR last met een snelheid van ongeveer 2 m per minuut, bijna het dubbele van de snelheid bij het handmatig lassen.
Het handige klemsysteem zorgt ervoor dat u de TRIAC in een paar seconden kunt monteren of demonte-ren. De voeding voor het handtoestel is geïntegreerd in de MINIFLOOR en u kunt de kabel stevig vastmaken.
Instelbare startschakelaar: stel het startmoment in naar eigen wens. De lange geleidearm verzekert u van perfecte geleiding in de lasnaad.
De MINIFLOOR kan op 51 mm afstand langs de muur lassen. Door zijn compacte formaat en geringe hoogte kan de MINIFLOOR al lassen als de beschikbare hoogte slechts 295 mm is. (b.v. onder gemonteerde stoelen en banken)
MINIFLOOR – efficace et abordable pour tous !
L’unité de commande MINIFLOOR transforme votre appareil manuel de soufflerie à air chaud en une soudeuse
automatique à air chaud MINIFLOOR en l’espace de quelques secondes, ce qui permet d’augmenter la qualité
de soudage, de faciliter le travail et de réduire nettement le temps nécessaire aux travaux. Son utilisation s’avère
avantageuse dès une longueur de cordon de soudure de 1,20 m et grâce à son poids réduit de 5,3 kg, elle
Soudeuse automatique à air chaud
MINIFLOOR
Rétrocompatible : même les modèles TRIAC plus anciens peuvent être raccordés sans problème grâce à des inserts interchangeables.
Montage/démontage du dévidoir sans outil : si le dévidoir ne peut pas être utilisé, la baguette de soudage peut tout de même être introduite de façon contrôlée dans la buse de soudage rapide.
Incroyablement rapide : malgré son poids réduit, le dispositif MINIFLOOR permet une vitesse de soudage d’environ 2 m/min, soit presque le double de la vitesse en soudage manuel.
Le système de fermeture par serrage rapide pour le support du TRIAC permet un montage et un démontage de l’appareil TRIAC en quelques secondes. L’alimentation de l’appareil manuel est intégrée à l’unité de commande MINIFLOOR, tout com-me le dispositif de fixation du câble.
Capteur de démarrage intégré : la fonction de temporisation du démarrage réglable individuellement sur l’unité de commande (Drive Unit) MINIFLOOR permet d’adapter à tout moment le démarrage aux besoins spécifiques. Le long bras de guidage assure également une excellente stabilité de la trajectoire.
L’écart minimal par rapport au mur de seulement 51 mm permet un soudage facile des gorges les plus courantes et même des jonctions verticales. La faible hauteur de l’unité permet un soudage continu dès lors que le passage mesure au moins 295 mm de hauteur.
MINIFLOOR - efficiente e accessibile a tutti!
L'unità motrice di MINIFLOOR trasforma in pochi secondi il vostro apparecchio portatile ad aria calda in una
saldatrice automatica MINIFLOOR. In tal modo è possibile incrementare la qualità della saldatura, facilitare il
lavoro e ridurre notevolmente le tempistiche. Può essere impiegato per cordoni di saldatura a partire da 1,20 metri,
e grazie al suo peso contenuto (5,3 kg) è facilmente trasportabile. Il MINIFLOOR salda i bordi senza giunture e a
Saldatrice automatica ad aria calda
MINIFLOOR
Compatibile con apparecchi precedenti: anche i modelli TRIAC precedenti possono essere collegati grazie alle unità di conversione.
Montaggio /smontaggio dell'avvolgicavo senza strumenti: qualora non fosse possibile utilizzare l'avvolgicavo, il filo può comunque essere reinserito in maniera controllata nell'ugello di saldatura veloce.
Incredibilmente veloce: nonostante il suo peso contenuto, MINIFLOOR offre una velocità di saldatura di circa 2 m/min, corrispondente a quasi il doppio di una saldatrice manuale.
La chiusura rapida a scatto per il supporto consente il montaggio e lo smontaggio del TRIAC in pochi secondi. La corrente elettrica per l'apparecchio manuale è integrata all'unità motrice del MINIFLOOR, come pure la possibilità di fissare il cavo.
Sensore di avvio integrato: con l'avvio ritardato regolabile individualmente nell'unità motrice del MINIFLOOR, è possibile gestire l'avvio dell'apparecchio secondo le proprie esigenze. Il lungo braccio guida garantisce un eccellente mantenimento della traccia.
La distanza minima di soli 51 mm assicura una saldatura senza problemi dei consueti raccordi e bordi rialzati. L'altezza d'installazione contenuta consente di effettuare saldature continue in spazi di accesso a partire da 295 mm.
MINIFLOOR: ¡eficiente y asequible para todo el mundo!
El dispositivo de guía MINIFLOOR convierte su dispositivo manual de aire caliente en una máquina de soldar
automática en pocos segundos. De esta manera mejorará la calidad de la soldadura, verá su trabajo facilitado
y terminará mucho más rápido. Es perfecta para costuras de soldadura desde 1,20 m, y gracias a su peso
reducido (5,3 kg) puede transportarse sin esfuerzo. El MINIFLOOR suelda partiendo del borde, sin interrupciones
Máquina de soldar automática de aire caliente
MINIFLOOR
Retrocompatible: Pueden conectarse también sin problemas modelos TRIAC más antiguos gracias a los accesorios intercambiables.
Montaje / desmontaje sin herramientas del desbobinador: Incluso si el desbobinador no puede utilizarse, el alambre de soldadura puede introducirse en la boquilla de soldadura rápida de forma controlada.
Increíble velocidad: A pesar de su ligereza, el MINIFLOOR alcanza una velocidad de soldadura de aprox. 2 m/min, casi el doble que a mano.
El sistema de fijación rápido del soporte TRIAC permite un montaje/desmontaje de la unidad TRIAC en pocos segundos. La alimentación de corriente del dispositivo manual está integrada en el dispositivo de guía MINIFLOOR, y existe la posibilidad de fijar el cable.
Sensor de arranque integrado: Con el retardo de arranque ajustable individualmente del dispositivo de guía (Drive Unit) MINIFLOOR, el arranque puede adaptarse en cualquier momento a las necesidades específicas de cada situación. El brazo guía garantiza una precisión extraordinaria.
La distancia mínima a la pared de solo 51 mm permite soldaduras en zonas marginales y rodapiés con toda facilidad. Gracias a su altura reducida, la MINIFLOOR es capaz de soldar por debajo de obstáculos a partir de 295 mm de espacio libre.
111
154.266
156.531
154.723
100.303
105.432105.433
154.425159.436
163.870
115
Fuss
böd
en u
nd
Inne
ndek
orat
ione
n
Heissluft Schweissautomat / Fahreinheit
MINIFLOOR Drive Unit
• Einziger Schweissautomat, der die Möglichkeit bietet, auf einfachste Weise ein Heissluft Handgerät anzuschliessen.
• Einsatz lohnt sich schon ab Schweissnahtlängen von 1.2 m • Zuverlässige Schweizer Qualität • Randabfahrendes Schweissen ermöglicht nur noch einen Übergang entlang der Schweissnaht – das spart Zeit!
• Mit 6.6 kg inkl. TRIAC AT/Düsen ist der MINIFLOOR ein Leichtgewicht und problemlos transportierbar.
• NEU: Verbesserte Spurtreue!
Technische Daten
MINIFLOOR nur Drive Unit mit TRIAC ATSpannung V~ 100 – 230 100 / 120 / 230
Frequenz Hz 50 / 60 50 / 60
Leistung W 5 1600
Temperatur °C 40 – 620
Luftmengenbereich % 20 – 100%
Antriebsgeschwindigkeit m/min 0.5 – 4.5 0.5 – 4.5
Elektronik Geregelt Geregelt / Display
Gebläse Bürsten Motor
Schweissnahtbreite mm 2.5 / 3.5
Abmessungen (L × W × H) mm 310 × 225 × 245 495 × 225 × 295
Gewicht kg 5.3 6.6 (inkl. Düsen)
Konformitätszeichen
Schutzklasse I |
Professionell, kostengünstig, unglaublich vielseitig: MINIFLOOR (TRIAC plus Drive Unit) für smarte Bodenprofis.
Zubehör MINIFLOOR Drive Unit
doppelt so schnell wie von Hand. Ideal für kurze Fugen
und kleine Objekte.
MINIFLOOR Drive Unit
Artikel-Nr. 154.330 MINIFLOOR drive unit, mit EU-Stecker; 230V154.334 MINIFLOOR drive unit, mit CH-Stecker; 230V154.337 MINIFLOOR drive unit, mit UK-Stecker; 110V154.338 MINIFLOOR dirve unit, mit AUS-Stecker; 230VIm Lieferumfang enthalten: Kunststoffkoffer, Rollenhalter, Gummieinlage-Set 57 - 60 mm, Klettverschluss - 2 Stück, Handbuch
154.335 MINIFLOOR drive unit, mit US/JP-Stecker; 120V154.336 MINIFLOOR drive unit, ohne Stecker; 230VIm Lieferumfang enthalten: Kunststoffkoffer, Rollenhalter, Gummieinlage-Set 57 - 60 mm, Gummieinlage-Set 64 - 65 mm, Klettverschluss - 2 Stück, Handbuch
TRIAC AT / TRIAC STAlle Modelle und Artikel-Nummern finden Sie im Kapitel Handgeräte.
Koffer zu MINIFLOOR
Tragegurt für Leister-Koffer
Gummieinsatz zur TRIAC-Halterung (alte Generation 64 mm)
Rohrdüse 5 mm für TRIAC
Schnellschweissdüse „air-slide“ für 5 mm Rohrdüse (100.303), push-fit
4 mm 5 mm (empfohlen)
Ersatz FührungsräderFührungsrad 0.5 mmFührungsrad 2.0 mm
Zusatzgewicht, erhöht die Spurtreue. Kompatibel mit Vorgängermodel
Allgemeines Zubehör
Floo
ring
and
Inte
rior
Dec
orat
ion
Hot-air welder / drive unit
MINIFLOOR Drive Unit
• The only automatic welder with the possibility of connecting a hot-air hand tool in the simplest manner.
• Worthwhile from weld lengths of 1.20 m/4 ft. • Swiss Quality you can rely on. • Due to (51 mm/2 inches) minimum distance from the wall, there is only one required joint along the weld seam, and THAT saves time!
• Weighting in at 6.6 kg / 15 lbs (incl. TRIAC AT / nozzles) the MINIFLOOR is a lightweight and easily transportable solution.
• NEW: Improved directional stability!
Technical Data
MINIFLOOR Drive Unit only with TRIAC ATVoltage V~ 100 – 230 100 / 120 / 230
Frequency Hz 50 / 60 50 / 60
Power W 5 1600
Temperature °C 40 – 620
Air flow range % 20 – 100%
Drive speed m/min 0.5 – 4.5 0.5 – 4.5
Control Closed-loop Closed-loop / Display
Blower Brush motor
Welding seam mm 2.5 / 3.5
Size (L × W × H) mm 310 × 225 × 245 495 × 225 × 295
Weight kg 5.3 6.6 (incl. Nozzles)
Conformity marks
Protection class I |
Professional, inexpensive, incredibly versatile: The new MINIFLOOR (TRIAC plus drive unit) for smart professionals.
Accessories MINIFLOOR Drive Unit
The MINIFLOOR is ideal for short joints and small
projects.
MINIFLOOR Drive Unit
Article No.: 154.330 MINIFLOOR drive unit, with EU-plug; 230V154.334 MINIFLOOR drive unit, with CH-plug; 230V154.337 MINIFLOOR drive unit, with UK-plug; 110V154.338 MINIFLOOR dirve unit, with AUS-plug; 230VScope of delivery: Plastic case, Roller Holder, Rubber pad set 57 - 60 mm, Velcro fastener 2 pcs, Operating Manual
154.335 MINIFLOOR drive unit, with US/JP-plug; 120V154.336 MINIFLOOR drive unit, without plug; 230VScope of delivery: Plastic case, Roller Holder, Rubber pad set 57 - 60 mm, Rubber pad set 64 - 65 mm, Velcro fastener 2 pcs, Operating Manual
TRIAC AT / TRIAC STAll models and part numbers can be found at chapter Hot-Air Hand Tools
Storage case MINIFLOOR
Carrying strap for Leister Case
Rubber pads for TRIAC-bracket (old generation 64 mm)
5 mm, tubular nozzle, push-fit
Speed weld nozzle, with small air-slide, push-fit on 5 mm tubular nozzle
4 mm 5 mm (recommended)
Replacement Guide wheelGuide wheel 0.5 mmGuide wheel 2.0 mm
Additional weight, increases the directional stability. Compatible with previous models
General accessories
Floo
ring
and
Inte
rior
Dec
orat
ion
Hot-air welder / drive unit
MINIFLOOR Drive Unit
• The only automatic welder with capability of connecting a hot-air hand tool in the simplest manner.
• Worthwhile from weld lengths of 1.20 m (4 ft.) • Swiss quality you can rely on. • Due to minimum distance of 51 mm (2.2 inches) from the wall, there is only one required joint along the weld seam, and THAT saves time!
• Weighing in at 6.6 kg (15 lbs ) (incl. TRIAC AT & nozzles) the MINIFLOOR is a lightweight and easily transportable solution.
• NEW: Improved directional stability!
Technical Data
MINIFLOOR Drive Unit only with TRIAC ATVoltage V~ 100 – 230 100 / 120 / 230
Frequency Hz 50 / 60 50 / 60
Power W 5 1600
Temperature °F 100 – 1150
Air flow range % 20 – 100%
Drive speed fpm 1.8 – 14.8 1.8 – 14.8
Control Closed-loop Closed-loop / Display
Blower Brush motor
Welding seam inch 1.0 / 1.4
Size (L × W × H) inch 12 × 9 × 10 20 × 9 × 12
Weight lbs 12 15 (incl. Nozzles)
Conformity marks
Protection class I |
Professional, inexpensive, incredibly versatile: The new MINIFLOOR (TRIAC plus drive unit) for smart professionals.
Accessories MINIFLOOR Drive Unit
The MINIFLOOR is ideal for short joints and small
projects.
MINIFLOOR Drive Unit
Article No.: 154.335 MINIFLOOR drive unit, with US/JP-plug; 120V154.336 MINIFLOOR drive unit, without plug; 230VScope of delivery: Plastic case, Roller Holder, Rubber pad set 2.25 - 2.4 inch, Rubber pad set 2.5 - 2.6 inch, Velcro fastener 2 pcs, Operating Manual
154.330 MINIFLOOR drive unit, with EU-plug; 230V154.334 MINIFLOOR drive unit, with CH-plug; 230V154.337 MINIFLOOR drive unit, with UK-plug; 110V154.338 MINIFLOOR dirve unit, with AUS-plug; 230VScope of delivery: Plastic case, Roller Holder, Rubber pad set 2.25 - 2.4 inch, Velcro fastener 2 pcs, Operating Manual
TRIAC AT / TRIAC STAll models and part numbers can be found at chapter Hot-Air Hand Tools
Storage case MINIFLOOR
Carrying strap for storage case
Rubber pads for TRIAC-bracket (old generation 64 mm / 2.5 inch)
5 mm / 0.2 inch, tubular nozzle, push-fit
Speed welding nozzle, with small air-slide, push-fit on 5 mm tubular nozzle
4 mm / 0.16 inch 5 mm / 0.2 inch (recommended)
Replacement guide wheelGuide wheel 0.5 mm / 0.02 inchGuide wheel 2.0 mm / 0.08 inch
Additional weight, increases the directional stability. Compatible with previous models
General accessories
地板
铺装
及室
内装
修
热风式自动焊接机
MINIFLOOR Drive Unit(行驶单元)
• 独一无二的自动焊接设备可以最简单的方式连接热风焊枪 • 在焊缝长度超过 1.2 m 后,该单元就大有用武之地 • 可靠的瑞士品质 • 沿边缘移动的焊接还可实现沿着焊缝的过渡–
这样可以节省时间! • MINIFLOOR 重量轻,包括 TRIAC AT/风嘴在内仅 6.6 kg,
搬运轻便。 • 新:改善方向穩定性!
技术数据 仅 Drive Unit(行驶单元) 带 TRIAC AT
MINIFLOOR电压 V~ 100 – 230 100 / 120 / 230频率 Hz 50 / 60 50 / 60功率 W 5 1600温度 °C 40 – 620空气量范围 % 20 – 100%驱动速度 m/min 0.5 – 4.5 0.5 – 4.5电子设备 闭环控制 闭环控制/数显鼓风机 有刷马达焊缝宽度 mm 2.5 / 3.5尺寸(长 × 宽 × 高) mm 310 × 225 × 245 495 × 225 × 295重量 kg 5.3 6.6(包括喷嘴)欧标合格标识保护等级 I |
专业、成本低、超乎想象的多样化: 为明智的施工专业人员设计的 MINIFLOOR (TRIAC焊枪加驱动单元的组合)
附件 MINIFLOOR Drive Unit
MINIFLOOR Drive Unit(行驶单元)
货号 154.330 MINIFLOOR drive unit,配有欧标插头;230V154.334 MINIFLOOR drive unit,配有瑞士插头;230V154.337 MINIFLOOR drive unit,配有英国插头;110V154.338 MINIFLOOR dirve unit,配有澳大利亚插头;230V配送范围: 塑料外壳,滚轮架,橡胶垫定 57 - 60毫米,尼龙搭扣2个,操作手册
154.335 MINIFLOOR drive unit,配有美国/日本插头;120V154.336 MINIFLOOR drive unit,无插头;230V配送范围: 塑料外壳,滚轮架,橡胶垫定 57 - 60毫米,橡胶垫定 64 - 65毫米, 尼龙搭扣2个,操作手册
TRIAC AT / TRIAC ST所有型號和部件號均可在熱空氣手動工具章節中找到
MINIFLOOR 的工具箱
Leister 机箱的条背带
TRIAC 支架用的橡胶垫(老一代产品 64 mm)
用于 TRIAC 的管式喷嘴 5 mm
快速焊接风嘴 "air-slide" 用于 5 mm 管式喷嘴 (100.303) push-fit(推入配合)
4 mm 5 mm(推荐)
更換導輪導輪 0.5 mm導輪 2.0 mm
增加重量,增加方向穩定性。 與以前的型號兼容
通用附件
床施
行/室
内装
飾
熱風自動溶接機 / 駆動ユニット
ミニフロア駆動ユニット
• 簡単にハンド熱風機を接続できる唯一の自動溶接機 • 長さ1.2 m以上の溶着ですでに威力を発揮 • スイス製ならではの品質 • 端から溶着を開始できるため、継ぎ目に沿って一気に溶接が可
能 – 作業時間を大幅に短縮! • トリアックとノズル装着状態でもわずか6.6 kgと軽量なミニフ
ロアなら、持ち運びも楽々• NEW:方向安定性が向上!
テクニカルデータ 駆動ユニットのみ トリアック AT 装着時ミニフロア
電圧 V~ 100 – 230 100 / 120 / 230周波数 Hz 50 / 60 50 / 60出力 W 5 1600温度 ℃ 40 – 620風量レンジ % 20 – 100%駆動速度 m/分 0.5 – 4.5 0.5 – 4.5電子 制御 制御 / ディスプレイ送風機 ブラシモータ溶着幅 mm 2.5 / 3.5寸法 (長さ x 幅 x 高さ) mm 310 x 225 x 245 495 x 225 x 295重量 kg 5.3 6.6(ノズル込み)適合規格マーク保護クラス I |
低コストなのにプロのような仕上がり!使い方も多彩:ミニフロア(トリアックと駆動ユニット)で床施工が一気に楽に
アクセサリー
作業時間をほぼ半分にまで短縮できるため、ちょっとした接合部や小型部品の溶着に最適です。
ミニフロア駆動ユニット
品番 154.330 ミニフロア駆動ユニット、EUプラグ付き、230V154.334 ミニフロア駆動ユニット、CHプラグ付き、230V154.337 ミニフロア駆動ユニット、UKプラグ付き、110V154.338 ミニフロア駆動ユニット、AUSプラグ付き、230V納品内容: プラスチックケース、ローラホルダ、 57セットラバーパッド - 60ミリメートル、ベルクロファスナー2個、取扱説明書
154.335 ミニフロア駆動ユニット、US/JPプラグ付き、120V154.336 ミニフロア駆動ユニット、プラグなし、230V納品内容: プラスチックケース、ローラホルダ、 57セットラバーパッド - 60ミリメートル、 64セットラバーパッド - 65ミリメートルベルクロファスナー2個、取扱説明書
トライアックAT /トライアックSTすべてのモデルと部品番号は、熱風ハンドツールの章に記載されています。
ミニフロア収納ケース
Leister ケース向けキャリング・ストラップ
トリアック固定用ゴム製アダプター(旧モデル用 64 mm)
トリアック用パイプノズル 5 mm
5 mm のパイプノズル(100.303)用スピード溶接ノズル「air-slide」(差込式)
4 mm 5 mm(推奨)
交換用ガイドホイールガイドホイール 0.5 mmガイドホイール 2.0 mm
重量を増やすと方向安定性が向上します。 以前のモデルとの互換性
汎用アクセサリ
Vlo
eren
/
inte
rieur
afw
erki
ng
Hetelucht lasautomaat/ aandrijving
MINIFLOOR Drive Unit
• De enige lasautomaat die u de mogelijkheid geeft om op een simpele manier een hetelucht handapparaat aan te sluiten • Vanaf 1 meter laslengte loont het al om de automaat in te zetten • Betrouwbare Zwitserse kwaliteit • Direct starten vanaf de wand. Nog maar 1 overgang op de
gehele lasnaad. Dat bespaart tijd! • Dankzij het functionele ontwerp en lage gewicht( 6,6kg incl.
TRIAC AT) kan de MINIFLOOR moeiteloos naar de volgende klus worden gedragen • NIEUW: Verbeterde richtingsstabiliteit!
Technische gegevens
MINIFLOOR Drive Unit met TRIAC ATSpanning V~ 100 – 230 100 / 120 / 230
Frequentie Hz 50 / 60 50 / 60
Vermogen W 5 1 600
Temperatuur °C 40 – 620
Luchthoeveelheid % 20 – 100 %
Snelheid m/min 0,5 – 4,5 0,5 – 4,5
Bediening Closed-loop Closed-loop/ Display
Ventilator koolborstelmotor
Lasnaad mm 2,5 / 3,5
Grootte (L × B × H) mm 310 × 225 × 245 495 × 225 × 295
Gewicht kg 5,3 6.6 (incl. mondstuk)
Conformiteitskenmerk
Beschermklasse I |
Professioneel, betaalbaar, en veelzijdig: Met de nieuwe MINIFLOOR direct vanaf de wand starten.
Toebehoren MINIFLOOR Drive Unit
De MINIFLOOR is zeer geschikt voor kleine tot middel-
grote projecten.
MINIFLOOR Drive Unit
Article No.: 154.330 MINIFLOOR drive unit, met EU-stekker; 230V 154.334 MINIFLOOR drive unit, met CH-stekker; 230V 154.335 MINIFLOOR drive unit, met US/JP-stekker; 120V 154.336 MINIFLOOR drive unit, met CN-stekker; 230V 154.337 MINIFLOOR drive unit, met UK-stekker; 110V 154.338 MINIFLOOR dirve unit, met AUS-stekker; 230V
TRIAC AT / TRIAC STAlle modellen en onderdeelnummers zijn te vinden op Handapparaten
Opberg box MINIFLOOR (inbegrepen bij levering)Draagriem voor Leister-koffer
Inlegschaal voor TRIAC handvat (oude generatie 64 mm)
5 mm, Buismondstuk, opschuif
Snellasmondstuk, met kleine luchts-leuf, opschuif 5 mm buismondstuk
4 mm 5 mm (aanbevolen)
VervangingsgeleiderStuurwiel 0.5 mmStuurwiel 2.0 mm
Extra gewicht, verhoogt de directionele stabiliteit. Compatibel met eerdere modellen
Algemeen toebehoren
Sol
s /
Déc
orat
ion
inté
rieur
e
Soudeuse automatique à air chaud / unité de commande
Unité de commande MINIFLOOR
• Seule soudeuse automatique à pouvoir être raccordée en toute simplicité à un appareil manuel de soufflerie à air chaud. • Utilisation avantageuse dès une longueur de cordon de
soudure de 1,2 m • Qualité et fiabilité suisses • Grâce au soudage à partir du bord, une seule passe est
désormais nécessaire le long du cordon de soudure, ce qui permet de gagner du temps ! • Pesant 6,6 kg avec le TRIAC AT/les buses, le dispositif
MINIFLOOR est un véritable poids plume, qui se transporte très facilement. • NOUVEAU: Amélioration de la stabilité directionnelle!
Caractéristiques techniques uniquement unité de commande
avec TRIAC AT
MINIFLOORTension V~ 100 – 230 100 / 120 / 230
Fréquence Hz 50 / 60 50 / 60
Puissance W 5 1 600
Température °C 40 – 620
Plage de débit d’air % 20 – 100 %
Vitesse d’entraînement m/min 0,5 – 4,5 0,5 – 4,5
Système électronique Régulé Régulé / écran
Soufflerie Moteur à balais
Largeur du cordon mm 2,5 / 3,5
Dimensions (L x l x H) mm 310 × 225 × 245 495 × 225 × 295
Poids kg 5,3 6,6 (avec les buses)
Marque de conformité
Classe de protection I |
Professionnel, économique et incroyablement polyvalent : le dispositif MINIFLOOR (TRIAC avec unité de commande) pour les vrais pros de la pose de revêtements de sol.
Accessoires
Unité de commande MINIFLOOR
se transporte sans effort. Le dispositif MINIFLOOR
soude à partir du bord, sans cordon et ce, presque
deux fois plus vite qu’à la main. Il est idéal pour les joints
courts et les petites surfaces.
Unité de commande MINIFLOOR
Réf. article 154.330 Unité de commande MINIFLOOR, avec fiche UE ; 230 V154.334 Unité de commande MINIFLOOR, avec fiche CH ; 230 V154.337 Unité de commande MINIFLOOR, avec fiche R-U ; 110 V154.338 Unité de commande MINIFLOOR, avec fiche AUS ; 230 VÉtendue des fournitures: Boîtier en plastique, Porte-rouleau, patin en caoutchouc fixé 57 - 60 mm, fermeture velcro 2 pcs, Manuel d'utilisation
154.335 Unité de commande MINIFLOOR, avec fiche US/JP ; 120 V154.336 Unité de commande MINIFLOOR, sans fiche; 230 VÉtendue des fournitures: Boîtier en plastique, Porte-rouleau, patin en caoutchouc fixé 57 - 60 mm, patin en caoutchouc fixé 64 - 65 mm, fermeture velcro 2 pcs, Manuel d'utilisation
TRIAC AT / TRIAC STTous les modèles et références des articles sont disponibles dans le chapitre Appareils manuels
Mallette pour MINIFLOOR
Sangle de transport pour mallette Leister
Insert en caoutchouc pour le support du TRIAC (ancienne génération
64 mm)
Buse tubulaire 5 mm pour TRIAC
Buse de soudage rapide « air-slide » pour buse tubulaire 5 mm (100.303) assemblage par emboîtement
4 mm 5 mm (recommandée)
Roue de guidage de rechangeRoue de guidage 0.5 mmRoue de guidage 2.0 mm
Poids supplémentaire, augmente la stabilité directionnelle. Compatible avec les modèles précédents
Accessoires généraux
Pav
imen
ti /
dec
oraz
ioni
inte
rne
Saldatrice automatica ad aria calda / unità di trasporto
MINIFLOOR unità motrice
• L'unica saldatrice automatica che offre la possibilità di connettere in maniera semplice un apparecchio manuale ad aria calda. • Può essere impiegato per cordoni di saldatura a partire da
1,20 metri. • Comprovata qualità svizzera. • La saldatura ai bordi consente anche il passaggio lungo il
cordone di saldatura – risparmiando tempo! • Con 6,6 kg incluso TRIAC AT/ugelli, il MINIFLOOR è
leggerissimo e facilmente trasportabile. • NOVITÀ: stabilità direzionale migliorata!
Specifiche tecniche
MINIFLOOR solo unità motrice con TRIAC ATTensione V~ 100 – 230 100 / 120 / 230
Frequenza Hz 50 / 60 50 / 60
Potenza W 5 1600
Temperatura °C 40 – 620
Gamma di quantità dell'aria % 20 – 100%
Celerità di trasmissione m/min 0,5 – 4,5 0,5 – 4,5
Elettronica Regolata Regolata / Display
Soffianti Motore a carboncini
Direzione di saldatura mm 2,5 / 3,5
Dimensioni (L × L × A) mm 310 × 225 × 245 495 × 225 × 295
Peso kg 5,3 6,6 (incl. ugelli)
Marchio di omologazione
Classe di protezione I |
Professionale, economico, incredibilmente versatile: MINIFLOOR (TRIAC più unità motrice) per brillanti professionisti dei pavimenti.
Accessori MINIFLOOR unità motrice
velocità quasi doppia rispetto alla saldatura manuale.
Ideale per fughe corte e piccoli oggetti.
MINIFLOOR unità motrice
N. articolo 154.330 MINIFLOOR unità motrice, con spina UE; 230V154.334 MINIFLOOR unità motrice, con spina CH; 230V154.337 MINIFLOOR unità motrice, con spina UK; 110V154.338 MINIFLOOR unità motrice, con spina AUS; 230VLa fornitura comprende: Custodia in plastica, supporto del rullo, il rilievo di gomma set 57 - 60 mm, chiusura in velcro 2 pezzi, Istruzioni per l'uso
154.335 MINIFLOOR unità motrice, con spina USA/GIAPP.; 120V154.336 MINIFLOOR unità motrice, senza spina; 230VLa fornitura comprende: Custodia in plastica, supporto del rullo, il rilievo di gomma set 57 - 60 mm, il rilievo di gomma set 64 - 65 mm, chiusura in velcro 2 pezzi, Istruzioni per l'uso
TRIAC AT / TRIAC STTutti i modelli e i codici degli articoli sono reperibili nel capitolo Apparecchi manuali
Contenitore del MINIFLOOR
Cinghia di trasporto per cassetta Leister
Inserto in gomma per il supporto del TRIAC (vecchia generazione 64 mm)
Ugello a tubo 5 mm per il TRIAC
Ugello di saldatura veloce "air-sli-de" per ugello a tubo di 5 mm (100.303), push-fit
4 mm 5 mm (consigliato)
Ruota guida di ricambioRuota guida 0.2 mmRuota guida 5.0 mm
Peso aggiuntivo, aumenta la stabilità direzionale. Compatibile con i modelli precedenti
Accessori generali
Pis
os /
Dec
orac
ión
d
e in
terio
res
Soldadora automática de aire caliente / unidad de desplazamiento
Dispositivo de guía MINIFLOOR
• La única máquina automática de soldadura que ofrece la posibilidad de conectar una dispositivo manual de aire caliente de la forma más sencilla. • Ideal a partir de costuras de soldaduras de 1,2 m • Calidad suiza de confianza • La soldadura desde el borde permite acabar el trabajo con
una sola pasada a lo largo de la costura – así se ahorra tiempo • Con 6,6 kg de peso incl. TRIAC AT/boquillas, el MINIFLOOR
es un peso ligero, y puede transportarse fácilmente. • NUEVO: ¡estabilidad direccional mejorada!
Datos técnicos solo Dispositivo de guía
con TRIAC AT
MINIFLOORTensión V~ 100 – 230 100 / 120 / 230
Frecuencia Hz 50 / 60 50 / 60
Potencia W 5 1600
Temperatura ºC 40 – 620
Gama de caudal de aire % 20 – 100%
Velocidad de accionamiento m/min 0,5 – 4,5 0,5 – 4,5
Sistema electrónico Regulado Regulado / Pantalla
Soplador Motor con escobillas
Anchura de la costura mm 2,5/3,5
Dimensiones (l × a × a) mm 310 × 225 × 245 495 × 225 × 295
Peso kg 5,3 6,6 (incl. boquillas)
Marca de conformidad
Clase de protección I |
Profesional, económico e increíblemente versátil: MINIFLOOR (TRIAC más dispositivo de guía) para profesionales inteligentes.
Accesorios
Dispositivo de guía MINIFLOOR
y casi el doble de rápido que a mano. Es ideal para
uniones cortas y pequeños proyectos.
Dispositivo de guía MINIFLOOR
N.º artículo 154.330 Dispositivo de guía MINIFLOOR, con conector EU; 230V154.334 Dispositivo de guía MINIFLOOR, con conector CH; 230V154.337 Dispositivo de guía MINIFLOOR, con conector UK; 110V154.338 Dispositivo de guía MINIFLOOR, con conector AUS; 230VAlcance del suministro: Caja de plástico, soporte de rodillo, almohadilla de goma fija 57 - 60 mm, cierre de velcro de 2 PC, Manual de Operación
154.335 Dispositivo de guía MINIFLOOR, con conector US/JP; 120V154.336 Dispositivo de guía MINIFLOOR, sin conector; 230VAlcance del suministro: Caja de plástico, soporte de rodillo, almohadilla de goma fija 57 - 60 mm, almohadilla de goma fija 64 - 65 mm, cierre de velcro de 2 PC, Manual de Operación
TRIAC AT / TRIAC STEncontrará todos los modelos y números de artículos en el capitulo Aparatos manuales
Estuche MINIFLOOR
Correa para transporte para el estuche Leister
Accesorios de goma para el soporte TRIAC (antigua generación 64 mm)
Boquilla tubular 5 mm para TRIAC
Boquilla de soldadura rápida «air-slide» para boquilla tubular de 5 mm (100.303), push-fit
4 mm 5 mm (recomendado)
Rueda guía de repuestoRueda de guía 0.5 mmRueda de guía 2.0 mm
Peso adicional, aumenta la estabilidad direccional. Compatible con modelos anteriores
Accesorios generales
112 www.leister.com
115.054
115.057
114.224
115.342
103.394
115.216
117.235
126.448
103.604103.602
115
• Reproducible results thanks to permanent regulation of the
NOMINAL and ACTUAL values
• Electronically-regulated heater and drive motor
• Steplessly controlled air flow (UNIFLOOR E only)
• All floor coverings welded without reconfiguration
• Automatic start
• Integrated wall switch
Article No.:
116.133 UNIFLOOR E, 120 V, including rod de-reeler, squeezed nozzle
(PVC and PUR), with US plug, storage case
115.345 UNIFLOOR E, 230 V, squeezed nozzle (PVC and PUR),
with Euro plug, storage case
Welding rod de-reeler
Trolley attachment
Floor welding nozzle,
optimized for PVC material
Floor welding squeezed nozzle,
for PVC + PUR material
Floor welding nozzle air-knife,
optimized for PUR material
3/3 air flap for Linoleum welding rod
2/3 air flap, optimized for PUR material
and linoleum welding rod
Storage case, plastic, greeen
(included with purchase)
Heating element, 120 V / 1800 W
Heating element, 230 V / 2100 W
UNIFLOOR E / S: A jack of all trades.
With the UNIFLOOR E automatic welder, you can
weld sheet vinyl or resilient flooring without any
reconfiguration, at speeds up to 7.5 m (25 ft.) per minute. UNIFLOOR E, the reliable partner for welding resilient flooring.
Hot-air welder
UNIFLOOR E / UNIFLOOR S Accessories UNIFLOOR E / UNIFLOOR S
103.602103.604
Technical Data
Voltage V~ 120
Power W 1800
Temperature °F 176 – 1148
Speed ft/min 3.3 – 24.6
Air flow range % 50 – 100
Size (L × W × H) inches 17 × 11 × 9
Weight (without de-reeler) lbs 25 (with 10 ft cable)
Conformity marking
Protection class I
General accessories
113
3.5
6
22
102.401
4
6
102.402
2.5
6
102.404
2.8
6102.403
3.5
6
102.405
3.5
102.406
126.448
Floo
ring
and
Inte
rior
Dec
orat
ion
• Cuts grooves into of all types of resilient floor coverings
• Extremely high, two-stage cutting speeds
• Adjustable guide roller for tracking accuracy
• Reduced dust particles when used with dust bag
• Cutting close to the edge possible
4.33 × 0.14 inch, tungsten carbide-
tipped blade, trapezium profile
(standard blade installed in most
Leister GROOVERs)
4.33 × 0.16 inch, tungsten carbide-
tipped blade, round profile
4.33 × 0.1 inch, tungsten carbide-
tipped blade, round profile
4.33 × 0.11 inch, tungsten carbide-
tipped blade, round profile
4.33 × 0.14 inch, tungsten carbide-
tipped blade, round profile
4.33 × 0.14 inch, diamond cutting
blade, semi-round profile
Storage case
(included with purchase)
Article No.: 108.395 GROOVER 120 V, tungsten carbide tipped blade 4.33 × 0.14 inch,
trapezium profile, with US plug polarized, storage case
108.396 GROOVER 120 V, tungsten carbide tipped blade 4.33 × 0.10 inch,
round profile, with US plug nonpolarized, storage case
108.393 GROOVER 230 V, tungsten carbide tipped blade 4.33 × 0.14 inch,
trapezium profile, with Euro plug, storage case
111.032 GROOVER 230 V, tungsten carbide tipped blade 4.33 × 0.14 inch,
round profile, with Euro plug, storage case
GROOVER: Dust-free milling.
The GROOVER grooving machine cuts welding grooves
into thick, tough floor coverings like sheet vinyl and oth-
er resilient flooring. The tool glides on three rollers and
cuts a uniform groove depth, even at high speeds. Strong drive suitable for PVC, PUR and linoleum materials.
Grooving machine
GROOVER Accessories GROOVER
Technical Data
Voltage V~ 120 / 230
Power W 350 / 700 (2 levels)
Cutting speeds rpmLevel 1: 14 500 (350 W)
Level 2: 18 500 (700 W)
Groove depth adjustment inches 0 – 0.16
Size (L × W × H) inches 9 × 8 × 10
Weight lbs 15 (with 10 ft cable)
Conformity marking
Approval mark
Protection class II
114 www.leister.com
151.394
150.815154.717
154.279151.453
• Lightweight and handy
• Groove preparation without milling
• Clean transition from machine-milled groove to the closure
• Ideal for surfaces that are small and difficult to access
• Precise work thanks to roller guide
• Gouge grooves directly up to connecting walls
• Adjustable groove depth
Protective plug
Blade 0.14 inch
Blade 0.1 inch
Replacement Guide wheel
Guide wheel 1.8 mm / 0.07 inch
Guide wheel pointed
GROOVY: Lightweight and handy.
The new “GROOVY” gouging tool is the lightweight, handy tool for the experienced resilient flooring installer. Its er-
gonomic shape makes it possible to achieve the desired groove width and depth up to the connecting walls, defined
and clean-cut, with little pressure.
Accessories GROOVY
Ideal for surfaces that are small and difficult of access.
Executing clean grooves up to connecting walls.
Precise and simple guidance thanks to integrated guide rollers.
Gouging tool
GROOVY
Technical Data
Groove wide inches 0.14
Groove depth inches 0.02 – 0.1
Size (L × W × H) inches 7 × 2 × 4
Weight lbs 0.64
Article number:150.809 GROOVY gouging tool, 0.14” for elastic floor coverings
115
100.303
107.144
105.576
131.867
105.567
105.575
105.431
105.432
105.433
107.139
107.137
159.848
160.550
107.270
142.281
148.933
106.970106.971
106.966
106.968
150.809
157.544
106.969
122.541
137.855
138.902
138.539
116.798
142.647
Floo
ring
and
Inte
rior
Dec
orat
ion
0.2” (5 mm), tubular nozzle, 15°
angled, push-fit (TRIAC)
0.2” (5 mm), tubular nozzle, 15°
angled, push-fit (HOT JET S)
0.2” (5 mm), tubular nozzle, 90°
angled, push-fit (TRIAC)
0.2” (5 mm), tubular nozzle, 90°
angled, push-fit (HOT JET S)
0.2” (5 mm), tubular nozzle, 6”
(150 mm), straight (HOT JET S)
0.2” (5 mm), tubular nozzle, 4”
(100 mm), straight (TRIAC)
0.12” (3 mm) speed weld nozzle,
with small air-slide, push-fit on 0.2”
(5 mm) tubular nozzle
0.16” (4 mm) speed weld nozzle,
with small air-slide, push-fit on
0.2” (5 mm) tubular nozzle
0.2” (5 mm) speed weld nozzle,
with small air-slide, push-fit on
0.2” (5 mm) tubular nozzle
0.18” × 0.5” speed weld nozzle for
fillet weld, push-fit on 0.2” (5 mm)
tubular nozzle
0.31” (8 mm) speed weld nozzle for
tape welding, push-fit on
0.2 (5 mm) tubular nozzle
speed weld nozzle 0.2” (5 mm),
with small air-slide, curved,
push-fit on 5 mm tubular nozzle
speed weld nozzle 0.1” (3 mm),
with small air-slide, curved,
push-fit on 5 mm tubular nozzle
Wide slot nozzle 6 × 0.5”
(150 x 12 mm), push-fit (ELECTRON)
Scraper nozzle (ELECTRON)
General accessories
Protective tube (ELECTRON)
Pressure roller with ball bearings
for welding rods: 0.16 – 0.2”
for welding rods: 0.08 – 0.16”
Hand grooving tool
Spare blades for hand grooving tool
“GROOVY” gouging tool for resilient
flooring applications
Leister Universal scissors 10.2 inch
with special shaft grinding
Quarter Moon Knife including leather
case, 3.9 inch stainless steel blade
Trimming guide,
for use with spatula (106.969)
Leister cutter with four spare blades
Hooked blade for LEISTER-cutter
(10 dispensers with 10 pcs=100 pcs)
Straight-edge blade for LEISTER-cutter
(10 dispensers with 10 pcs = 100 pcs)
Brass brush
Brass brush 0.12” (3 mm)
116 www.leister.com
Leister. We know how.
Leister is a world leader in the industry and one of the pioneers in the fields of hot-air, hot-wedge and extrusion
welding processes. Leister Technologies AG manufactures high-quality welding machines for demanding work for
all industries, in which plastic is processed.
Hot-air WeldingHand tools, automatic welders, stationary welding machines
In hot gas welding, the thermal energy is controlled. Heated air is fed into the workpiece and the required amount of pressure is exerted onto the wheels.
Combi-wedge WeldingCombi-wedge welding machines
When Combi-wedge welding (combination of a heated wedge and hot air), preheating of the air and the actual welding process is carried out over a wedge. The preheated air also takes partial cleaning of the workpieces.
Hot-wedge WeldingWedge welders
The process where the wedge is heated directly by heating cartridges. The generated heat is transferred directly onto the workpiece. This method also is suitable for thicker materials.
Extrusion WeldingExtrusion Welders (FUSION & WELDPLAST)
In extrusion welding, the substrate is preheated with hot air and connected by adding the extrudate. The welding rod is fed into the heater barrel and the plast is processed by the extruder screw.
Heating element
Hot air nozzle
Hot wedge
Pressure wheel
Pressure wheel
Pressure wheel
Hot air nozzle
Preheated air
Welding rod
Welding rod
Plastic membrane
Plastic membrane
Plastic membrane
Outlet (hot air)
Welding direction
Welding direction
Welding direction
Welding direction
Hot air nozzle
Hot air nozzle
Pendulum
Preheated air
Downforce
Downforce
Base material
Base material
Base material
Extrudate
Welding direction
Hot air nozzle
Draw welding nozzle
Extruder screw
Downforce
Welding rod
Know-how
Welding Methods
Pendulum WeldingHand tools
Pendulum welding requires a welding rod similar to the base material. Both
surfaces are then heated using hot air. Using an up and down, pendulum-like
motion and consistent downward pressure, the two are joined.
Draw Welding (Speed Welding)Hand tools
This welding method requires the use of a speed welding nozzle. Preheat the surfaces to the apropriate temperature. The surfaces are plasticized by hot air and joined under consistent downward pressure.
Preheated air
117
Plastic welding with Leister
In plastic welding, thermoplastic materials are joined through the combination of thermal energy, pressure and wel-
ding speed. Combined, these key factors are the main considerations in the welding of many types of applications
including: roofing, civil engineering, tunneling, tents & tarps, signs & banners, floor coverings, vehicle repairs, plastic
fabrication and many more.
Know-how
Weld Types / Weld Geometries
Welding without filler material
Welding with additional material
Overlap
Keder / Piping
Hem
Pole pockets
Tape
Antivandalism
X-seam
Corner seam
V-seamFloor seam
Fillet weld seam
Overlap seam
Outside corner seam
Double seam w/test channel
Special applications
Roofing
Technical Textiles
Civil Engineering / GEO
Plastic Fabrication
Flooring
118 www.leister.com
Have a look on:www.youtube.com/user/leisterswitzerland
Like and share us on:www.facebook.com/leisterworld
Follow us on Twitter:twitter.com/leisterworld
join us on LinkedIn:www.linkedin.com/company/leister-technologies-ag
Contents
We take the greatest care in presenting correct, complete and
up-to-date information. However, we can assume no responsi-
bility whatsoever for the information offered in this catalog. We
reserve the right to modify or update all information at any time
without prior notice.
Copyrights and trademarks
All text, images, graphics as well as their arrangement are
subject to copyright protection and other laws on the protection
of intellectual property. The reproduction, alteration, transmissi-
on or publication of this catalog in part or in its entirety, except
for personal, non-commercial use, is prohibited in all possib-
le forms.
All the marks featured in this catalog (protected all brand
marks, logos and business names) are the property of Leis-
ter Technologies AG or third parties and may not be used,
permanently downloaded, copied or distributed without prior
written consent.
Specifications
Specifications are subject to change at any time without pri-
or notice.
© 2017 Leister Technologies AG. All rights reserved.
Legal Information
The Leister Group, its employees and distribution network, are committed to be strong and reliable partners, giving you the opportunity to move your business forward.
Recognized as the worldwide leader in developing and producing quality products.« »
«
»
Serving all corners of the globe since 1949. With representation in over 100 countries, we are local worldwide and close to our customers.
«»
With strong technical and application competence, Leister provides standard products and custom engineered solutions to all major industries.
«»
«»
Leister – the synonym for quality, innovation and technology.
www.leister.com
© Copyright by Leister, Switzerland
Europe:Andorra
Austria
Belgium
Cyprus
Denmark
Finland
France
Germany
Greece
Iceland
Ireland
Italy
Luxembourg
Malta
Monaco
Netherlands
Norway
Portugal
Liechtenstein
San Marino
Spain
Sweden
Switzerland
Turkey
United Kingdom
Vatican
Albania
Armenia
Azerbaijan
Belarus
Bosnia-Herzegovina
Bulgaria
Croatia
Czech Republic
Estonia
Georgia
Hungary
Kosovo
Latvia
Lithuania
Macedonia
Moldova
Montenegro
Poland
Romania
Russia
Serbia
Slovakia
Slovenia
Ukraine
Americas:Canada
Mexico
USA
Belize
Costa Rica
El Salvador
Guatemala
Honduras
Nicaragua
Panama
Argentina
Bolivia
Brazil
Chile
Colombia
Ecuador
Peru
Venezuela
Central Asia:Kazsachstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East:Bahrain
Iran
Iraq
Israel
Jordan
Qatar
Saudi Arabia
U.A.E
Africa:Algeria
Botswana
Egypt
Ivory Coast
Kenya
Lesotho
Libya
Malawi
Morocco
Mozambique
Namibia
North Sudan
South Africa
Swaziland
Tunisia
Zambia
Zimbabwe
Asia Pacific:Bangladesh
China
Hong Kong
India
Indonesia
Japan
Korea
Macao
Malaysia
Mongolia
Philippines
Singapore
Sri Lanka
Taiwan
Thailand
Vietnam
Oceania:Australia
New Zealand
Leister Technologies AG Galileo-Strasse 10CH-6056 Kaegiswil / Switzerlandphone: +41 41 662 74 74fax: +41 41 662 74 [email protected]
Leister Technologies LLCItasca, IL 60143 / USAphone: +1 855 534 [email protected]
Leister Technologies Ltd.Shanghai 201 109 / PRCphone: +86 21 6442 [email protected]
Leister Technologies KKOsaka 564-0051 / Japan phone: +81 6 6310 62 00 [email protected]
Leister Technologies Benelux BV3991 CE Houten / Nederlandphone: +31 (0)30 2199888 [email protected]
Leister Technologies Italia s.r.l.20090 Segrate / Italiaphone: +39 02 2137647 [email protected]
Leister Technologies India Pvt600 041 Chennai / Indiaphone: +91 44 2454 3436 [email protected]
Leister Technologies Deutschland GmbH D-58093 Hagen / Germany phone: +49-(0)2331-95940 [email protected]
Your Leister Sales and Service Center:
Pla
stic
Wel
din
g /
US
/ 08
.201
8 / I
den
t No
. 108
.521
Swiss Made. Leister Technologies AG is ISO 9001 certified.
Our close worldwide network of more than 130 Sales and Service Centres in more than 100 countries.