Lenel Systems International Inc. -...

Lenel Systems International Inc.HARDWARE PRODUCTS CATALOG

PERPETUAL INNOVATION

Acc

ess

Con

trol

Vide

oC

rede

ntia

l

ContentsAccess Control Hardware

Controllers & Interfaces Intelligent System Controllers

Intelligent Dual Reader Controller

Reader Interface Modules

Input/Output Control Modules

Reader Interface Gateways

Star Multiplexer

Readers & Keypads Magnetic Card Access Readers

Proximity Card Readers

OpenCard™ & OpenProx™ Readers

Biometric Reader

Indestructible Keypads & Readers

Command Keypad

Power Supplies and Enclosures Multi-Agency Power Supply/Chargers

CE-Marked Power Supply/Chargers

Identity Credential Hardware

Capture Hardware USB Capture Kit

Digital Video Hardware

Video Recorders Video Recorders for OnGuard VideoManager™

Network Video Cameras Fixed Network Cameras

Speed Dome Network Cameras

Video Encoders Single Channel Video Encoder

Contact Information

Page

1

9

11

15

19

23

25

27

33

36

39

43

45

47

49

51

53

57

61

64

Manage Everything...

Access C

ontrol

LNL-500

The LNL-500 Intelligent System Controller (ISC) by Lenel serves as the access control engine for

an OnGuard system. The ISC provides power, performance, and flexibility for the most demanding

applications. Multiple combinations of Input Control Modules, Output Control Modules, and Card

Reader Interface Modules can be connected.

The ISC can communicate upstream at 38.4 Kbps via RS-232/RS-485 multidropped configuration,

modem dial-up communication, or Ethernet TCP/IP networks. The ISC can store up to 12,500

cardholders. The ISC can have two downstream 2-wire RS-485 channels or one 4-wire RS-485

channel. In either configuration, you may connect up to 32 readers or 16 devices. Each device

(LNL-1100, LNL-1200, LNL-1300,LNL-1320) uses one device address.

Features and Functionality

■ Host communications - 38.4 Kbps direct wire (RS-232/RS-485 multidropped), Ethernet TCP/IP,

or dial-up communication

■ 12 VAC or 12 VDC input power

■ Supports up to 8 different card formats simultaneously

■ Enhanced anti-passback capabilities

■ Flash memory for real-time program updates

■ Lithium battery back-up

■ Up to 32,000 access levels

■ 255 holidays with grouping

■ 255 timezones, each with 6 time intervals

■ Elevator control, support for 64 floors

■ 512 KB on-board memory (Up to 12,500 cardholders)

■ Up to 16 downstream devices and 32 readers

■ Alarm masking

■ Individual extended held open and strike times (ADA required)

■ Up to 9-digit PIN codes

■ Biometric smart card template storage support

■ Status LEDs for heartbeat, upstream and downstream communication

■ 2 dedicated inputs for tamper and power failure status

■ NIST certified Advanced Encryption Standard (AES) 128-bit communication algorithm

Intelligent System Controller

1

Acc

ess

Con

trol

LNL-500

2

Controller OptionsLNL-500Host Communications

LNL-ETHLAN-MICR

Dial-Up ModemLNL-56KEXTLNL-DC336K

Power Supplies & EnclosuresLNL-AL400ULX

LNL-AL600ULX-4CB6

ABT-12

SpecificationsPrimary Power (DC or AC)

DC input:AC input:

Memory and Clock BackupEnvironmental

Temperature:

Humidity:Mechanical

Dimensions:Weight:

Approvals

Standard 512 KB on-board memory

CoBox Micro serial server, flash ROM, RJ-45 (10/100Base-T), diagnostic LEDs, dimensions 1.57 x 1.93 in. (39 x 49 mm), internally powered, standoffs included

56 K external modem with cables12 VDC-powered, 33.6 K external modem for Intelligent System Controller

Lenel UL Listed 4 A, 110 VAC Power Supply - 12 VDC or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL Listed Power Supply - 12 VDC or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery Kit - 12 VDC, 12 AH battery (PS-12120)

* The ISC is for use in low voltage, power-limited, class 2 circuits only.12 VDC ± 15%. 250 mA12 VAC ± 15%. 400 mA RMS3 V lithium, type BR2325

Operating: 32° to 158° F ( 0° to +70° C)Storage: -67° to 185° F (-55° to +85° C)0 to 95% RHNC

6 x 5 x 1 in. (152 x 127 x 25 mm)8 oz. (230 g) nominalUL 294 and 1076-listed, CE-marked, RoHS compliantNIST certified Advanced Encryption Standard (AES) 128-bit communication algorithm

RS-485 multidrop

LNL-1300Up to 16 Single ReaderInterface Modules

LNL-1100Input Control Module

(Up to 16 Inputs perLNL-1100)

LNL-1200Output Control Module

(Up to 16 Outputs perLNL-1200)

LNL-1320Up to 16 Dual ReaderInterface Modules

Up to 16 Downstream Devices(32 Readers Max)

Downstream Communication

Two 2-wire ports orOne 4-wire port

LNL-500Intelligent System Controller

OnGuard Security Server

CORPORATE HEADQUARTERS LOCAL AREA NETWORK (TCP/IP)

Access C

ontrol

LNL-1000

The LNL-1000 Intelligent System Controller (ISC) by Lenel serves as the access control engine for

an OnGuard system. The ISC provides power, performance, and flexibility for the most demanding

applications. Multiple combinations of Input Control Modules, Output Control Modules, and Card

Reader Interface Modules can be attached.

The ISC can communicate upstream at 38.4 Kbps via RS-232/RS-485 multidropped

configurations, modem dial-up communication, or Ethernet TCP/IP networks. The ISC can store up

to 175,000 cardholders online. Each ISC can have four downstream 2-wire RS-485 channels or

two 4-wire RS-485 channels. In either configuration, up to 64 readers or 32 devices may be

connected to a single ISC. Each device (LNL-1100, LNL-1200, LNL-1300, or LNL-1320) uses one

device address.


■ Host communications - 38.4 Kbps direct wire (RS-232/485 multidropped), Ethernet TCP/IP,

or dial-up


■ Supports up to 16 different formats (8 card formats and 8 asset formats)



■ Lithium battery back-up

■ Up to 32,000 access levels


■ 255 timezones, each with 6 time intervals


■ 1 MB on-board memory, expandable to 4 MB (up to 175,000 cardholders)

■ Up to 32 downstream devices and 64 readers

■ Alarm masking


■ Up to 9-digit PIN codes


■ Two dedicated inputs for tamper and power failure status

■ Biometric credential-based device support

■ NIST certified Advanced Encryption Standard (AES) 128-bit communication algorithm


3

Acc

ess

Con

trol

LNL-1000

Controller OptionsLNL-1000Memory Options

LNL-1003MKHost Communications

LNL-ETHLAN



DC input:AC input:

Memory and Clock BackupCommunication Ports

Port 1:Ports 2-5:

InputsCabinet Tamper Monitor:Power Fault Monitor:

Wire RequirementsPower:RS-485:RS-232:Inputs:

EnvironmentalTemperature:Humidity:

MechanicalDimensions:Weight:

Approvals

Standard 1 MB on-board memory

3 MB memory expansion kit (Includes 3 MB memory and expansion board)

Micro serial server, flash ROM, DB25 serial port RJ-45 (10/100Base-T)Ethernet interface, diagnostic LEDs, external power 120 VAC with cables

56 K external modem with cables12 VDC-powered/33.6 K external modem for Intelligent System Controller

* The ISC is for use in low voltage, power-limited, class 2 circuits only.12 VDC ± 15%. 350 mA12 VAC ± 15%. 600 mA RMS 3 V lithium, type BR2325

RS-232 or RS-485 (2-wire or 4-wire) 9600 to 38.4 Kbps asyncRS-485 (2-wire or 4-wire) 9600 to 38.4 Kbps async

Unsupervised, dedicatedUnsupervised, dedicated

1 twisted pair, 18 AWG24 AWG twisted pair(s) with shield, 4000 ft. (1219 m) maximum24 AWG, 25 ft. (7.6 m) maximumTwisted pair, 30 ohms maximum

Operating: 32° to 158° F (0° to +70° C) Storage: -67° to 185° F (-55° to +85° C)0 to 95% RHNC


RS-485 multidrop








Downstream Communication

Four 2-wire ports orTwo 4-wire ports or

Combination 2- and 4-wire ports




4

Access C

ontrol

LNL-2000

The LNL-2000 Intelligent System Controller (ISC) from Lenel is designed for advanced access

control applications. As the access control engine for the OnGuard system, the ISC provides

power and functionality. The ISC can communicate to the host computer in a single- or dual-path

configuration of Ethernet, dial-up or direct connect communication (RS-232/RS-485 combinations).

Multiple combinations of Input Control Modules, Output Control Modules, Biometric Gateways, and

Card Reader Interface Modules (up to 32 devices, 64 readers) can be configured.

The LNL-2000 can communicate upstream to the host computer at up to 115.2 Kbps via RS-232,

RS-485 multidropped, dial-up, or Ethernet communication. The LNL-2000 can store up to 350,000

cardholders online, and supports selective download for larger cardholder databases. The ISC has

two host communication ports. It also has four downstream communication ports, which support

either four 2-wire or two 4-wire RS-485 communication. In either configuration, you may connect

up to 32 devices in many combinations of LNL-1100, LNL-1200,LNL-1300, LNL-1320, LNL-500B,

and LNL-500W modules.


■ Host dual path communication enabled - direct wire (RS-232/RS-485 multi-dropped), Ethernet

TCP/IP, or dial-up communications

■ 1 MB on board memory expandable to 8 MB (up to 350,000 cardholders)



■ Biometric template storage support for RSI®, Identix®, and Bioscrypt®



■ Lithium battery back-up for event memory

■ Up to 32,000 access level permissions


■ 255 timezones, each with 6 intervals

■ Elevator control support for up to 128 floors

■ Alarm masking


■ Up to 9-digit user PIN codes



■ NIST Certified Advanced Encryption Standard (AES) 128-bit algorithm for communications


5

Acc

ess

Con

trol

LNL-2000

6

Controller OptionsLNL-2000Memory Options

LNL-1003MKLNL-1007MK

Host CommunicationsLNL-ETHLANLNL-ETHLAN-MICR



DC input:AC input:

Memory and Clock BackupCommunication Ports

Port 1, 6:Ports 2-5:



EnvironmentalTemperature:

Humidity:Mechanical

Dimensions:Weight:

Approvals

Standard 1 MB on-board memory

3 MB memory expansion kit (Includes 3 MB memory and expansion board)7 MB memory expansion kit (Includes 7 MB memory and expansion board)

Micro serial server, flash ROM, DB25 serial port RJ-45 (10/100Base-T)CoBox Micro serial server, flash ROM, RJ-45 (10/100Base-T), diagnostic LEDs, dimensions 1.6 x 1.9 in. (40 x 49 mm), internally powered and includes standoffs

56 K external Modem with cables12 VDC-powered/33.6 K external modem for Intelligent System Controller

* The ISC is for use in low voltage, power-limited, class 2 circuits only.12 VDC ± 15%. 400 mA12 VAC ± 15%. 650 mA RMS 3 V lithium, type BR2325

RS-232 or RS-485 (2-wire or 4-wire) 9600 to 115.2 Kbps asyncRS-485 (2-wire or 4-wire) 9600 to 38.4K bps async



Operating: 32° to 158° F (0° to +70° C)Storage: -67° to 185° F (-55° to +85° C)0 to 95% RHNC


RS-485 multidrop







Downstream CommunicationFour 2-wire portsTwo 4-wire ports

Combination 2- and 4-wire ports



LNL-1300

Hand GeometryReaders

FingerprintReadersor

LNL-500B



Up to 8 Biometric Devices

Access C

ontrol

LNL-3300

The LNL-3300 Intelligent System Controller (ISC) by Lenel is designed for advanced access

control applications. As the access control engine for the OnGuard system, the ISC provides

power and functionality. The ISC can communicate to the host computer in a single- or dual-path

configuration of Ethernet, dial-up or direct connect RS-485 communication. Multiple combinations

of Input Control Modules, Output Control Modules and Card Reader Interface Modules (up to 64

devices) can be configured.

Utilizing its native Ethernet communications and an advanced 32-bit processor, the LNL-3300 can

communicate upstream to the host computer through its primary Ethernet port, with throughput up

to 8 times greater than the fastest serial connections. The secondary port can communicate at up

to 115.2 Kbps using 2-wire RS-485 multidrop, dial-up, or an Ethernet daughterboard connection.

The LNL-3300 can store up to 500,000 cardholders in non-volatile flash memory, and supports

selective download for larger cardholder databases. The two downstream RS-485 2-wire ports

can be used to connect up to 64 devices (64 doors) in many combinations of LNL-1100, LNL-1200,

LNL-1300, LNL-1320, LNL-500B, and LNL-500W modules.


■ On-board high-speed Ethernet 10/100Base-T upstream port provides up to 8 times higher

throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported.

■ DNS device naming through DHCP extended commands

■ Host dual path communication enabled - on-board Ethernet TCP/IP, direct wire (RS-485, 2-wire

multidrop capable), or dial-up communications

■ 15 MB of available on-board, non-volatile flash memory

■ Battery-backed, non-volatile storage of 50,000 events

■ Firmware stored in flash memory, background download of firmware updates supported

■ 12 or 24 VDC input power


■ Biometric template storage support for Schlage Recognition Systems®, Bioscrypt®,and Identix®


■ Up to 32,000 access level permissions


■ 255 timezones, each with 6 intervals

■ Elevator control support for up to 128 floors

■ Alarm masking


■ Up to 9-digit user PIN codes

■ Status LEDs for heartbeat & battery status, upstream and downstream communication, and

memory write status


■ Advanced Encryption Standard (AES) 128-bit algorithm for communications


7

Acc

ess

Con

trol

LNL-3300

Controller OptionsLNL-3300

Secondary Host CommunicationsLNL-ETHLANLNL-ETHLAN-MICR



DC input:Memory and Clock BackupCommunication Ports

Primary (Ethernet) Port 0:Secondary Upstream Port 1:Downstream Ports 2-3:




Humidity:Mechanical

Dimensions:Weight:

Approvals

15 MB On-board flash memory available for cardholder & asset database50,000 event battery backed RAM for event log

Micro serial server, flash ROM, DB25 serial port RJ-45 (10/100Base-T)CoBox Micro serial server, flash ROM, RJ-45 (10/100Base-T), diagnostic LEDs, dimensions 1.6 x 1.9 in. (40 x 49 mm), internally powered and includes standoffs

56 K external modem with cables12 VDC-powered/33.6 K external modem for Intelligent System Controller

* The ISC is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 300 mA maximum3 V lithium, type BR2325, BR2330, CR2330

10/100Base-T Ethernet high-speed portRS-485 (2-wire) or RS-232 9600 to 115.2 Kbps async, optional Ethernet serial serverRS-485 (2-wire) 9600 to 38.4 Kbps async




5 x 6 x 1 in. (127 x 152.4 x 25 mm)4 oz. (115 g) nominalUL 294 and 1076-listed, CE-marked, ROHS compliantAdvanced Encryption Standard (AES) 128-bit communication algorithm, NIST certification pending

8









LNL-3300Intelligent

System Controller

RS-485 multidrop

Access C

ontrol

LNL-2220The LNL-2220 Intelligent Dual Reader Controller (IDRC) by Lenel provides a single board solution for interfacing one or two doors to an OnGuard system. In addition, other I/O and reader interface modules can be added on the LNL-2220’s downstream port to expand its capabilities. The LNL-2220 revolutionizes access control system architecture by allowing Ethernet connection directly from an entry location to the OnGuard server, while still providing the security, functionality, and modularity of Lenel’s proven hardware platform. The LNL-2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the LNL-2220 allows nearly all local functionality to continue unimpaired until the server connection is restored.

Utilizing its native Ethernet communications and an advanced 32-bit processor, the LNL-2220 can communicate upstream to the host computer through its Ethernet port (with a throughput up to eight times greater than the fastest serial connections), or at up to 115.2 Kbps using RS-232 communication directly or through an external dial-up modem. The LNL-2220 can store up to 250,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The downstream RS-485 two-wire port can be used to connect up to 32 devices (maximum 64 doors).

Two on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS-485 readers and the bidirectional RS-485 Open Supervised Device Protocol (OSDP) communications. Each LNL-2220 supports up to eight different card formats. The LNL-2220 includes eight inputs that support normally open, normally closed, supervised, and unsupervised circuits. In addition, four output relays support fail-safe or fail-secure operation.

Features and FunctionalityController Functionality■ On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than

serial-to-Ethernet converters. DHCP and fixed IP addressing supported.■ DNS device naming through DHCP extended commands■ 6 MB of available on-board, non-volatile flash memory■ Battery-backed, non-volatile storage of 50,000 events■ Firmware stored in flash memory, background download of firmware updates supported■ Supports up to 16 different formats (8 card formats and 8 asset formats)■ Biometric template storage support for Schlage Recognition Systems®, Bioscrypt®, and Identix®.■ Direct connection of Bioscrypt RS-485 devices■ Enhanced anti-passback capabilities■ Up to 32,000 access level permissions■ 255 holidays with grouping, 255 timezones, each with 6 intervals■ Elevator control support for up to 128 floors■ Individual extended held open and strike times (ADA required)■ Up to 9-digit user PIN codes■ 20 status LEDs■ 2 dedicated inputs for tamper and power failure status■ 12 or 24 VDC input power■ Advanced Encryption Standard (AES) 128-bit algorithm for communications

Reader Interface Functionality■ Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads■ 4 Form-C relay outputs, 5 A at 30 VDC ■ Door contact supervision (open/closed) and REX push-button monitor for each door■ Strike control and auxiliary output for each door■ Bicolor reader status LED support plus beeper control, or 2-wire LED support ■ On-board regulator allows 12 VDC reader power from 24 VDC power source

Intelligent Dual Reader Controller

9

Acc

ess

Con

trol

LNL-2220

10


LNL-2220Intelligent

System Controller







RS-485 multidrop

Controller OptionsLNL-2220



DC input:Event Memory and Clock BackupCommunication Ports

Primary (Ethernet) Port:Alternate Upstream Port 1:Downstream Port 2:

InputsTamper and Power Fail Monitors:Door position, REX, and AUX:

OutputsRelay outputs:

Reader PowerDC output:

Reader Port Compatibility


Humidity:Mechanical

Dimensions:Weight:

Approvals

6 MB On-board flash memory available for cardholder & asset database,50,000 event battery backed RAM for event log

56 K external modem with cables12 VDC-powered/33.6 K external modem

* The LNL-2220 is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 500 mA maximum3 V lithium, type BR2325, BR2330, CR2330

10/100Base-T Ethernet high-speed portRS-232 9600 to 115.2 Kbps asyncRS-485 (2-wire) 9600 to 38.4 Kbps async

Unsupervised, dedicated8, each programmable as normally open or normally closed, supervised or unsupervised circuits

4 Form-C 5 A at 30 VDC relay outputs: 2 strike, 2 auxiliary

12 VDC, 125 mA regulated when 24 VDC powered, or 12 to 24 VDC 125 mA current limitedWiegand Data1/Data0, Magnetic Clock/Data, F/2F single-wire protocol, Bioscrypt RS-485,OSDP (Open Supervised Device Protocol RS-485)

Operating: 32° to 158° F (0° to 70° C)Storage: -67° to 185° F (-55° to 85° C)0 to 95% RHNC

6 x 8 x 1 in. (152 x 203 x 25 mm)9 oz. (255 g) nominalUL 294 and 1076-listed, CE-marked, ROHS compliantAdvanced Encryption Standard (AES) 128-bit communication algorithm, NIST certification pending

Access C

ontrol

LNL-1300 Series 2

Lenel Systems International offers a Single Reader Interface (SRI) module for access control

solutions. Access control card readers, keypads, or readers with keypads that use standard

Wiegand Data1/Data0 or Clock/Data communication are supported, as are those supporting the

bidirectional RS-485 Open Supervised Device Protocol (OSDP). Lock, unlock, and facility code

offline access modes are supported on all readers connected to the SRI. Each SRI supports up to

eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

The SRI provides a vital link between the Intelligent System Controller (ISC) and the card reader

attached to the interface. As many as 32 SRI modules can be multidropped using RS-485 2-wire

communication up to 4,000 feet (1219 m) per port away from the ISC. Each SRI module is

individually addressed for increased reporting capabilities with OnGuard access control software

applications. The SRI includes two inputs that support normally open, normally closed, supervised,

and non-supervised circuits. Two output relays support fail-safe or fail-secure operation.


■ 12 or 24 VDC power supply

■ Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads

■ Two Form-C relay outputs (5 A door strike and 1 A aux relays)

■ Up to 16 different card formats (8 card formats and 8 asset formats)

■ Issue code support

■ Downloadable firmware

■ Door contact open or closed, supervised or non-supervised

■ REX push-button monitor - supervised or non-supervised

■ Strike control output

■ Bicolor or 2-wire reader status LED support

■ Reader beeper control

■ Plastic mounting channel

■ Support for offline reader access mode


Single Reader Interface Module

11

Acc

ess

Con

trol

LNL-1300 Series 2

12


LNL-AL600ULX-4CB6

ABT-12

SpecificationsPrimary Power (DC)

DC input:Reader Power

DC output:Reader Port Compatibility


Humidity:Mechanical

Dimension:Weight:

Approvals

Lenel UL-listed 4 A, 110 VAC power supply - 12 or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS capable (battery optional), UL-listedLenel UL listed power supply - 12 or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS capable (battery optional), UL-listedBattery kit - 12 VDC, 12 AH battery (PS-12120)

* The SRI is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 125 mA

12 VDC 125 mA max current limitedWiegand Data1/Data0Magnetic Clock/DataF/2F single-wire protocolOpen Supervised Device Protocol (RS-485)


2.9 x 4.25 x 1.4 in. (74 x 108 x 36 mm)4 oz. (120 g) nominalUL 294 and 1076-listed, CE-marked, RoHS compliant


RS-485 multidrop

LNL-1300Single ReaderInterface Module





LNL-1320Dual ReaderInterface Module



Access C

ontrol

LNL-1320 Series 2

Lenel Systems International offers a Dual Reader Interface (DRI) module for access control

solutions. Most access control card readers, keypads, or readers with keypads that use standard

Wiegand Data1/Data0 or Clock/Data communication are supported, as are those that support the

bidirectional RS-485 Open Supervised Device Protocol (OSDP). Lock, unlock, and facility code

offline access modes are supported on all readers connected to the DRI. Each DRI supports up to

eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

The DRI provides a vital link between the Intelligent System Controller (ISC) and the card reader

attached to the interface. As many as 32 DRI modules can be multidropped using RS-485 2-wire

or 4-wire communication up to 4,000 feet per port away from the ISC. Each DRI module is

individually addressed for increased reporting capabilities with OnGuard access control software

applications. The DRI includes eight inputs that support normally open, normally closed,

supervised, and non-supervised circuits. In addition, six output relays support fail-safe or

fail-secure operation.


■ 12 or 24 VDC power supply

■ Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads


■ Six Form-C 5 A at 30 VDC relay outputs

■ Up to 16 different formats (8 card formats and 8 asset formats)

■ Issue code support for magnetic and Wiegand formats

■ Door contact supervision (open/closed)

■ REX push-button monitor

■ Strike control output

■ Bicolor reader status LED support and 2-wire LED support

■ Beeper control

■ Dedicated tamper and power failure circuits

■ Support for offline reader access mode

■ On-board jumpers for termination

■ On-board regulator allows 12 VDC reader support from 24 VDC power source

■ DIP switch-selectable addressing

Dual Reader Interface Module

13

Acc

ess

Con

trol

14

LNL-1320 Series 2


LNL-AL600ULX-4CB6

ABT-12


DC input:Reader Power

DC output:Reader Port Compatibility


Humidity:Mechanical

Dimension:Weight:

Approvals

Lenel UL-listed 4 A, 110 VAC power supply - 12 or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL Listed Power Supply - 12 or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery kit - 12 VDC, 12 AH battery (PS-12120)

* The DRI is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 450 mA

12 VDC, 125 mA regulated or 12 to 24 VDC 125 mA current limitedWiegand Data1/Data0Magnetic Clock/DataF/2F single-wire protocolOpen Supervised Device Protocol (RS-485)

Operating: 0° to +70° C (32° to 158° F)Storage: -55° to +85° C (-67° to 185° F)0 to 95% RHNC

6 x 8 x 1 in. (152 x 203 x 25 mm)10 oz. (290 g) nominalUL 294 and 1076-listed, CE-marked, ROHS compliant


RS-485 multidrop









Access C

ontrol

LNL-1100 Series 2

The Lenel Input Control Module (ICM) provides the access control system with high-speed

acknowledgment of critical alarm points in monitored areas. The ICM communicates directly with

the Intelligent System Controller (ISC) either by 2-wire or 4-wire RS-485 communication. The ICM

has 16 configurable input control points and 2 output control relays. It supports normally open,

normally closed, supervised and non-supervised circuits.

The input circuits are scanned using an analog-to-digital converter. The digitized input status

signal is software-monitored and controlled, so that each input point can be programmed as a

supervised or non-supervised alarm point.

The output relays can also be configured for fail-safe or fail-secure operation. Each relay supports

the “On,” “Off,” and “Pulse” Lenel OnGuard software commands.


■ Grade B, A, and AA line supervision


■ 16 programmable supervised or non-supervised contacts

■ 2 Form-C 5 A, 30 VDC contacts for load switching

■ 2 dedicated inputs for tamper and power failure status

■ On-board termination jumpers



■ Status LED for host communication and heartbeat

■ Variable resistor values for line supervision


Input Control Module

15

Acc

ess

Con

trol

16

LNL-1100 Series 2


LNL-AL600ULX-4CB6

ABT-12


DC input:Memory and Clock BackupEnvironmental

Temperature:

Humidity:Mechanical

Dimension:Weight:

Approvals

Lenel UL-listed 4 A, 110 VAC power supply - 12 or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL-listed power supply - 12 or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 A) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery Kit - 12 VDC, 12 AH battery (PS-12120)

* The ICM is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 350 mA3 V lithium, type BR2325

Operating: 0° to +70° C (32° to 158° F)Storage: -55° to +85° C (-67° to 185° F)0 to 95% RHNC



RS-485 multidrop









Access C

ontrol

LNL-1200 Series 2

The Lenel Output Control Module (OCM) communicates directly with the Intelligent System

Controller (ISC) by either 2-wire or 4-wire RS-485 communication. Each OCM is an

individually-addressed device, and counts as a single device on all Intelligent System Controllers.

The OCM can be operated by either 12 or 24 VDC power. Each OCM includes dedicated tamper

and power failure input contacts.

The OCM has 16 programmable output relays that can be configured for fail-safe or fail-secure

operation. Each relay supports the “On,” “Off,” and “Pulse” Lenel OnGuard software commands.


■ 16 Form-C 5 A, 30 VDC contacts for load switching


■ 2 dedicated digital inputs for tamper and power failure status

■ RS-485 communication, multidropped (2-wire or 4-wire RS-485)

■ Up to 16 OCMs per Intelligent System Controller

■ On-board termination jumpers


■ Status LEDs for communication to the host, heartbeat and relay status


Output Control Module

17

Acc

ess

Con

trol

LNL-1200 Series 2

18


LNL-AL600ULX-4CB6

ABT-12


DC input:Environmental

Temperature:

Humidity:Mechanical

Dimension:Weight:

Approvals

Lenel UL-listed 4 A, 110 VAC power supply - 12 or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL-listed power supply - 12 VDC or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery kit - 12 VDC, 12 AH battery (PS-12120)

* The OCM is for use in low voltage, power-limited, class 2 circuits only.12 or 24 VDC ± 15%. 500 mA




RS-485 multidrop









Access C

ontrol

LNL-500B

The Lenel Biometric Reader Interface Gateway (BRI) is an extremely versatile and vital link

between the Lenel LNL-2000 or LNL-3300 Intelligent System Controllers (ISCs) and biometric

readers from multiple manufacturers. Using OnGuard Access, the gateway can be uniquely

configured to support Recognition Systems hand geometry readers, Identix fingerprint readers or

Bioscrypt fingerprint readers.

The BRI communicates at 38.4Kbps via RS-485 multidropped configuration to the ISC. The

gateway has two downstream RS-485 2-wire ports, each of which supports up to 4 uniquely

addressed biometric readers. Each downstream port supports biometric readers located up to

4,000 feet (1219 m) away from the BRI.


■ Host and downstream communications - 38.4 Kbps, 2-wire RS-485 multidropped

communications

■ 12 VDC or 12 VAC input power @ 250 mA or 400 mA

■ Supports up to 8 biometric readers

■ Supported biometric readers:

• Ingersoll Rand® - HandKey II, ID3D and HandKey CR

• Identix® V20

• Bioscrypt® V-FLEX, V-PASS-FX and V-STATION

• Lenel LNL-BIO007-xxx

■ Flash memory for real time program updates

■ Status LEDs for heartbeat, upstream and downstream communications

■ Two dedicated inputs for Cabinet Tamper and Power Failure status

■ On-board RS-485 termination jumpers

■ Easy to configure dip switches for address and communications speeds

■ Supports fingerprint and PIN code two-factor authentication

■ On-board program configuration and clock battery backup

Biometric Reader Interface Gateway

19

Acc

ess

Con

trol

LNL-500B

20

Enrollment Kit

RS-232Communication

LNL-500B

Intelligent System Controller(64 readers maximum)

LAN/WAN

One LNL-500B per port RS-485 Communication

RS-232, RS-485, Ethernet, Dial-up Communication

Ports3 2

Any supportedaccess reader

Any supportedaccess reader



Ports 2 - 5

Eight Readers Per Biometric Gateway

(address 00-07)

Software Link(s) Between Readers

Software Link(s) Between Readers

Interface OptionsLNL-500B


LNL-AL600ULX-4CB6

ABT-12


DC input:AC input:

Memory and Clock backupEnvironmental

Temperature:

Humidity:Mechanical

Dimensions:Weight:

ApprovalsSupported Readers

Lenel Biometric Reader Interface Gateway - 12 VDC or 12 VAC, (5 year lithium battery) 512KB standard memory, support for a maximum of 8 IR Hand Geometry readers per interface

Lenel UL Listed 4 A, 110 VAC Power Supply - 12 VDC or 24 VDC 4 A output (switch selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL Listed Power Supply - 12 VDC or 24 VDC 6 A output (switch selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery Kit - 12 VDC, 12 AH battery (PS-12120)

* The LNL-500B is for use in low voltage, power limited, class 2 circuits only.12 VDC ± 15%. 250 mA12 VAC ± 15%. 400 mA RMS 3 V lithium, type BR2325


6 x 5 x 1 in. (152 x 127 x 25 mm)8 oz. (230 g) nominalUL 294 and 1076-listed, CE-marked, RoHS compliantIngersoll Rand - HandKey, HandKey II, HandKey CR and ID3D readers (Firmware version 1.21 or later required)Identix V20 Readers (Firmware version 2.12 or later required)Bioscrypt V-FLEX and V-STATION (Firmware version 7.30 or later required)Lenel BioGuard Readers (LNL-BIO007-xxx)

Access C

ontrol

LNL-500W

The Lenel Wireless Reader Interface (WRI) Gateway module provides an innovative solution to

interface with Wireless products from Schlage. The gateway provides the link from the Lenel

Intelligent System Controller (ISC) to the Panel Interface Module (PIM-485-OTD) wireless receiver.

This configuration will support up to 16 Schlage wireless reader products per gateway.

The PIM-485-OTD operates in the 900 MHz license-free band, allowing rapid, no-hassle

deployment. Installation time for a standard secured entry point that requires a door contact,

Request to Exit switch, reader and door strike is reduced by as much as 40%. The 900 MHz

spread spectrum delivery model has been extensively tested to ensure that communications are

ultra-reliable. Using this wireless configuration, communicating between OnGuard and the

Schlage wireless readers is both simple and dependable.

The gateway can communicate at 38.4Kbps via RS-485 multidropped configuration to the ISC.

The gateway has two downstream RS-485 2 wire ports. Port 3 supports one PIM-485-OTD

receiver, which in turn supports up to 16 uniquely addressed Schlage Wireless reader products.

The gateway can be installed up to 4000 feet (1219 m) away from the PIM-485-OTD. This

configuration is supported for all ISCs: LNL-500, LNL-1000 and LNL-2000.


■ Host and downstream communications - 38.4 Kbps, 2 wire RS-485 multidropped

communications

■ 12 VDC or 12 VAC input power @ 250 mA or 400 mA

■ Supports up to 16 Schlage Wireless readers

■ Supported Schlage Wireless readers include:

• WA 5296 Wireless Cylindrical Lock

• WA 5696 Wireless Mortise Lock

• WA 5694 Wireless Mortise Lock with 1” Autobolt

• WA 993 Wireless Exit Kit

• WRI (Wireless Reader Interface)

• WPR (Wireless Portable Reader)


■ Status LEDs for heartbeat, upstream and downstream communications

■ Two dedicated inputs for Cabinet Tamper and Power Failure status

■ On-board RS-485 termination jumpers

■ Easy to configure dip switches for address and communication speeds

■ On-board program configuration and clock battery backup

Wireless Reader Interface Gateway

21

Acc

ess

Con

trol

LNL-500W

22

Reader OptionsLNL-500W


LNL-AL600ULX-4CB6

ABT-12


DC input:AC input:

Memory and Clock backupEnvironmental

Temperature:

Humidity:Mechanical

Dimensions:Weight:

ApprovalsSupported Readers

Lenel Wireless Reader Interface Gateway - 12 VDC or 12 VAC, (5 year lithium battery) 512KB standard memory, support for a maximum of 16 Wireless readers per interface. Requires OnGuard software version 5.10.4xx or later

Lenel UL Listed 4 A, 110 VAC Power Supply - 12 VDC or 24 VDC 4 A output (switch selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL Listed Power Supply - 12 VDC or 24 VDC 6 A output (switch selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery Kit - 12 VDC, 12 AH battery (PS-12120)

* The LNL-500W is designed for use in low voltage, power limited, class 2 circuits only.12 VDC ± 15%. 250 mA12 VAC ± 15%. 400 mA RMS 3 V lithium, type BR2325


6 x 5 x 1 in. (152 x 127 x 25 mm)8 oz. (230 g) nominalUL 294-listed, CE-marked, RoHS compliantSchlage Wireless - WA 5296, WA 5696, WA 5694, WA 993, WRI, WPR

WA 5296 Cylindrical

Ports2 3

WA 5696 MortiseWRI-OTD

Note: Up to 16 MIRL, IRL, WRI or WPR per LNL-500W

Ports 2 - 5LNL-500W

Schlage WirelessOnGuard Integration

for PIM-485-OTD



PIM-485-OTD

Access C

ontrol

LNL-8000

The Star Multiplexer from Lenel is designed to implement star topology on a downstream port of

any Lenel Intelligent System Controller or on any host communication port of any OnGuard server.

Up to eight RS-485 (2-wire) connections or four RS-485 (4-wire) connections can be made

downstream of the LNL-8000. The Lenel Star Multiplexer requires 12 VDC for power. It allows

communication protocol conversion, and provides connection with alternate communication

devices to extend effective distances.

The master or host interface can use either RS-232 or RS-485 (2-wire) communication. The Lenel

Star Multiplexer interfaces upstream with the Lenel ISC, and downstream with one of many Lenel

RS-485 products (including the LNL-1100 Input Control Module, LNL-1200 Output Control Module,

LNL-1300 Single Reader Interface Module, LNL-1320 Dual Reader Interface Module and

LNL-500A, LNL-500B, or LNL-500W Gateway Interface Modules) on each downstream port (ports

2-9). A maximum of eight (8) devices are allowed per downstream port.


■ Host communications - 38.4 Kbps direct wire (RS-232/RS-485 multidropped)

■ 12 VDC input power


■ Support for either 2-wire or 4-wire RS-485 topologies

■ RS-485 on-board termination is jumper selectable

■ Can be used for retrofit and new wiring configurations

Star Multiplexer

23

Acc

ess

Con

trol

LNL-8000

24

Mechanical and Architectural Characteristics and WiringRequirements

Communications


LNL-AL600ULX-4CB6

ABT-12



Temperature:

Humidity:Mechanical

Dimensions:Weight:

Approvals

The acceptable power supply is 12 VDC. Locate the power source as close as possible to the LNL-8000.Use a minimum of 18 AWG (one twisted pair) wiring for the power supply. Communication with the Intelligent System Controller is via a 2-wire or 4-wire RS-485 interface. The interface allows multidrop communication on a single ISC port, up to 4,000 feet (1219 m) away per port. It also can be used to convert a single RS-232 communication port to a multidrop RS-485 port. Use twisted pair(s) with a minimum of 24 AWG and a shield for communication. The 2-wire or 4-wire communications with end-of-line termination are jumper-selectable.

Lenel UL-listed 4 A, 110 VAC power supply - 12 VDC or 24 VDC 4 A output (switch-selectable), 120 VAC input, continuous supply current with enclosure (12 x 16 x 4.5 in. / 305 x 406 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedLenel UL-listed power supply - 12 VDC or 24 VDC 6 A output (switch-selectable), 120 VAC (1.6 amps) input, continuous supply current with enclosure (18 x 24 x 4.5 in. / 457 x 610 x 114 mm), lock and open frame transformer, tamper switch, UPS-capable (battery optional), UL-listedBattery kit - 12 VDC, 12 AH battery (PS-12120)

* This module is for use in low voltage, power limited, class 2 circuits only.12 VDC ± 15%, 250 mA


6 x 5 x 1 in. (152 x 127 x 25 mm)4 oz. (180 g) nominalUL 294 and 1076-listed, CE-marked

LNL-1300

OnGuard Security

Server

LNL-1320

2 3 4 5 6 7 8 9

LNL-8000Star Multiplexer

2 3 4 5 6 7 8 9

LNL-8000Star Multiplexer(Up to 4 multiplexers)Up to 32 Downstream

RS-485 Devices(up to 8 per port)

1 2 3 4 1 2 3 4 1 2 3 4




Access C

ontrol

LNL-2005WLenel Systems International’s magnetic card access readers are durable, dependable, convenient, and competitively-priced. The magnetic card access readers are available in both 12 VDC and optional 5 VDC models. The readers have a fully-weatherized metal casing shell that provides strength and durability. The readers are first treated with an anti-corrosion film, then coated with a tough, abrasion-resistant, beige or black textured finish that complements any interior or exterior decor. The readers accept low and high coercivity magnetic stripe cards. Track 2 magnetic readers are standard, but Track 1 and Track 3 readers are available optionally.

The readers communicate to the Intelligent System Controller (ISC) through one of two reader interface modules. The single (LNL-1300) or dual (LNL-1320) reader interface module interprets magnetic (Clock/Data) data from the reader, and sends the signal back to the ISC via RS-485 communication. The reader can be located up to 500 feet (152 m) away from the reader interface module.

Features■ 12 VDC power supply (optional 5 VDC available)■ Bidirectional card swipe■ One million card pass read head■ Choice of three attractive weatherproof finishes: black, beige, antique brass■ Single bicolored LED for reader status■ Audible indicator beeper contacts■ Strike controlled by reader interface■ DIP switch-selectable data outputs■ Maximum 500 feet (152 m) distance from reader interface module■ RJ-45 jack for quick installation■ Track 2 standard (Track 1 and 3 optional)

SpecificationsPrimary power (DC)

DC input:

Current:Environmental

Temperature:

Humidity: Mechanical

Dimension:Weight:

Approvals

Magnetic Card Access Reader

25

* The reader is for use in low voltage, power-limited, class 2 circuits only.12 V model: 12 VDC (10.2 to 13.8 VDC)5 V model: 5.8 VDC (4.9 to 6.4 VDC) 50 mA maximum, 25 mA typical


1.95 x 5.50 x 1.30 in. (50 x 140 x 33 mm)10 oz. (290 g) nominalUL 294 and 1076-listed, CE-marked

Acc

ess

Con

trol

LNL-2010/2020 series Lenel Systems International’s Magnetic Card Access Readers are durable, dependable, convenient and competitively priced. The Magnetic Card Access Readers are available in both 12 VDC and optional 5 VDC models. The LNL-2010W is a magnetic swipe only reader, and the LNL-2020W includes a twelve-position keypad (available with an indestructible keypad). The readers have a fully weatherized metal casing shell, which provides strength and durability. The readers are first treated with an anti-corrosion film and then coated with a tough, abrasion resistant, beige or black textured finish that complements any interior or exterior decor. The readers accept low and high coercivity magnetic stripe cards. Track 2 magnetic readers are standard, but optional Track 1 or Track 3 readers are available.

The readers communicate with the Intelligent System Controller (ISC) through one of two reader interface modules. The single (LNL-1300) or dual (LNL-1320) reader interface module interprets the Wiegand communication (Data 1/Data 0 or Clock and Data) from the reader and sends the signal back to the ISC via RS-485 communication. The reader can be located up to 500 feet (152 m) away from the reader interface module.

Features■ Host communications - 38.4 Kbps direct wire (RS-232/RS-485 multidropped), Ethernet TCP/IP,or dial-up communication■ 12 VDC power supply (optional 5 VDC available)■ Bidirectional card swipe■ One million card pass read head■ Choice of three attractive weatherproof finishes: black and beige (antique brass optional)■ Two single-color LEDs for reader status■ Track 2 default (optional Track 1 and 3)■ Audible indicator beeper contacts■ Strike controlled by reader interface module■ DIP switch selectable data outputs■ Maximum 500 feet (152 m) distance from reader interface module■ RJ-45 jack for quick installation■ Optional tamper switch■ 12-position keypad (LNL-2020W only)■ (Optional) indestructible keypad, LNL-2020W-NDK

SpecificationsPrimary power (DC)

DC input:

Current:Environmental

Temperature:

Humidity: Mechanical

Dimension:Weight:

Approvals

Magnetic Card Access Readers

26

* The ISC is for use in low voltage, power-limited, class 2 circuits only.12 V Model: 12 VDC (10.2 to 13.8 VDC)5 V Model: 5.8 VDC (4.9 to 6.4 VDC) 50 mA maximum, 25 mA typical


1.9 x 5.5 x 1.3 in. (50 x 140 x 33 mm)10 oz. (290 g) nominalUL 294 and 1076-listed, CE-marked

Access C

ontrol

LenelProx LPSR-2400

The LenelProx LPSR-2400 special range proximity reader is Lenel’s latest engineering

achievement. With a respectable read range of 4 to 5.5 in. (102 to 140 mm), the LPSR-2400

delivers exceptional read range without compromising quality, durability, or performance.

The LPSR-2400 is a full-featured, Wiegand-compatible reader with LED and annunciator. The

LPSR-2400 reader is metal-compensated, resulting in minimal loss of read range when mounted

on a metal mullion.

The LPSR-2400’s electronics are potted in UL-approved potting compound to seal them against

adverse environmental conditions. The reader is manufactured in an ISO 9000-certified facility to

meet the highest quality standard. The attractive enclosure comes in a dark gray or beige color,

and may be mounted on mullions or single-gang electrical boxes, or directly to an interior or

exterior wall.

Features

■ Read range: 4 to 5.5 in. (102 to 140 mm)

■ Electronics potted with epoxy compound for protection in demanding environmental applications

■ LED for visual feedback, piezo for audio feedback

■ Compatible with all Wiegand access control systems

■ Industry standard Wiegand (26- to 56-bit) output

■ Attractive high-tech enclosure

Specifications

■ Transmitting frequency: 125 kHz

■ Voltage: 5 to 12 VDC

■ Current requirement: 40 to 70 mA

■ Output format: Wiegand

■ Operating temperature: -31° to 150° F (-35° to 65° C)

■ Operating humidity: 0 to 95% non-condensing

■ Weight: 4 oz. (113 g)

■ Dimensions: 4.5 x 1.8 x 0.7 in. (114 x 45 x 18 mm)

■ Color: Dark gray (standard) or beige

■ Cable: 10 conductor (#22 AWG) stranded with continuous shield for typical Wiegand installations

■ Certifications: Complies with FCC Part 15, UL 294-Listing and CE-Mark pending

Proximity Reader

27

Acc

ess

Con

trol

LenelProx LPMM-6800

Lenel’s standard mullion mount reader (LPMM-6800) offers the read range of a mid-range reader

at the cost of a “mini.” It is designed to be mounted directly on a metal door frame/mullion.

Because it is metal-compensated, there is minimal reduction in read range. The LPMM-6800 has a

read range of 6 to 8 in. (152 to 203 mm). It is designed for indoor and outdoor applications.

The LPMM-6800’s electronics are potted with a UL-approved compound that makes them

impervious to the elements. The reader is manufactured in an ISO 9000-certified facility to achieve

the highest quality standard. It is highly reliable, warranted for life, and available in either dark gray

(standard) or beige color.

The LPMM-6800 reader can easily be configured to meet the needs of virtually any access control

system. The reader outputs both Wiegand and RS-232 data, and features annunciator and LED

feedback.

Features

■ Read range: 6 to 8 in. (152 to 203 mm)

■ Compact modular design for metal frame (mullion) mounting

■ Electronics potted with epoxy compound for protection in demanding environmental applications


■ Industry-standard Wiegand and RS-232 output

■ Indoor and outdoor application

Specifications




■ Audio alarm: 4 kHz burst

■ Output formats: Wiegand & RS-232



■ Weight: 6 oz. (170 g)





Mullion Mount Proximity Reader

28

Access C

ontrol

LenelProx LPSP-6820

The LenelProx LPSP-6820 proximity reader is ideally suited for applications where a tasteful

appearance makes a difference. It has an attractive package that looks good whether it is placed

outside the boardroom or at the front gate in the rain or snow.

The LPSP-6820 offers a stylish appearance and a superior read range of 6 to 8 in. (152 to 203

mm). It is designed to be mounted on a standard single-gang electric wall box, or on the surface of

an interior or exterior wall. The LPSP-6820 is available in dark gray or beige color, and is certain to

blend in with the architectural design of any building. It is easily installed, and the two-piece

construction allows the covers to be switched to accommodate color changes.

The LPSP-6820 outputs Wiegand and RS-232 formats and is compatible with all access control

systems. The electronics are potted with UL-approved potting compound that protects the reader

from harsh environmental conditions. It is manufactured in an ISO 9000-certified facility to achieve

the highest quality standards. The LPSP-6820 is highly reliable, warranted for life and capable of

providing the best read range in its class.

Features


■ Electronics potted with epoxy compound for demanding environmental applications


■ Industry-standard Wiegand and RS-232 output

■ Proximity technology – no contact required

■ Attractive, high-tech enclosure

■ Indoor and outdoor applications

Specifications





■ Output formats: Wiegand and RS-232

■ Operating temperatures: -31° to 150° F (-35° to 65° C)


■ Weight: 8 oz. (227 g)




■ Certifications: Complies with FCC Part 15, UL 294-Listing and CE-mark pending

Proximity Reader

29

30

Acc

ess

Con

trol

LenelProx LPKP-6840

The LenelProx LPKP-6840 reader is a combination keypad and switchplate proximity reader. It is

specifically designed for high-security applications that require dual verification.

The LPKP-6840 proximity reader offers dual functionality and a superior read range of 6 to 8 in.

(152 to 203 mm). It is designed to mount on a standard single-gang electric wall box, or on the

surface of an interior or exterior wall. The entire unit is UL 294-listed as an indoor/outdoor access

control device.

The LPKP-6840 keypad/proximity reader outputs industry-standard Wiegand (26 to 56 bit) format.

The keypad output is programmable to match the requirements of a majority of access control

systems. The proximity reader also simultaneously outputs an RS-232 signal, which duplicates the

Wiegand output from the proximity cards/tags for integration with time and attendance or debit

systems. It is manufactured in an ISO 9000-certified facility to achieve the highest quality

standards. The LPKP-6840 is highly reliable, warranted for life, and capable of outputting Wiegand

data in multiple configurations.

Features

■ Read range: 6 to 8 in. (152 x 203 mm)


■ Industry-standard Wiegand and simultaneous RS-232 output

■ Lifetime warranty

■ Available in a choice of keypad output configurations (default is 8 bit)

Specifications





■ Output formats:

• Wiegand and RS-232 for card/tag reader

• Wiegand only for keypad

■ Operating temperatures: -31° to 150° F (-35° to 65° C)


■ Weight: 8 oz. (227 g)


■ Color: Dark gray or beige

■ Cable: 10 conductor stranded with continuous shield for typical Wiegand installations


Proximity Reader with Keypad

Access C

ontrol

LenelProx LPMR-1824

The LenelProx LPMR-1824 is a standout among mid-range proximity readers. It boasts an

industry-best 18 to 24 in. (457 to 610 mm) read range, and a compact enclosure. No more

misreads or fumbling to get the card close enough to the reader. The LPMR-1824 reads at

maximum range every time. And it does so at an unprecedented 600 mA at 12 VDC.

The LPMR-1824 is designed for indoor or outdoor applications. Its electronics are potted with a

UL-approved epoxy to seal them against adverse environmental conditions. The LPMR-1824 is

manufactured in an ISO 9000-certified facility to achieve the highest quality standard. It is highly

reliable and has a lifetime warranty. It has both Wiegand and RS-232 protocol interfaces, and is

compatible with all standard access control systems.

The two-piece construction of the LPMR-1824 makes for fast and easy installation.

Features


■ Electronics potted with epoxy compound for weather resistance


■ Compatible with all Wiegand access control systems

■ Channeled housing allows for rear or side mounting

■ Proximity technology - no contact required

■ Metal-compensated version available for mounting on metal surface

■ Industry standard Wiegand and RS-232 data output

Specifications







■ Weight: 25 oz. (709 g)


■ Color: Dark gray


■ Certifications: Complies with FCC Part 15, UL 294, 1076-Listing and CE-Mark pending

Mid-Range Proximity Reader

31

Acc

ess

Con

trol

LenelProx LPLR-911

The LenelProx LPLR-911 long range reader is in a class by itself, with an industry-best, 9 to 11 ft.

(2.75 x 3.35 m) read range within and a compact package. The LPLR-911 is ideal for outdoor

applications such as AVI (automatic vehicle identification), parking entry, and gate controls. The

LPLR-911 is also perfect for indoor applications such as asset monitoring and tracking.

Operating in the license-free 900 MHz band, the LPLR-911 is the first access control reader to

combine the convenience of 900 MHz technology with a fast multi-tag feature and Wiegand format

output. The multi-tag capability makes it easy to set up portal or hallway asset monitoring stations

to determine the flow of assets.

The innovative construction of the LPLR-911 reader seals it against adverse environmental

conditions. It is manufactured in an ISO 9000-certified facility to achieve the highest quality

standard. The reader delivers an impressive combination of high styling and superior range. It

offers Wiegand and RS-232 protocol interfaces and compatibility with all standard access control

systems.

Features

■ Read range: 9 to 11 ft. (2.75 to 3.35 m) with 1.0 A at 6.5 VDC, to 0.4 A at 15 VDC

■ Housing sealed for weather resistance

■ Anti-collision technology and multiple tag reading capability

■ Compatible with existing access control system and asset tracking systems

■ Utilizes passive tag technology (no battery)

Specifications

■ Industry standard Wiegand and RS-232 data output

■ Transmitting frequency: 902 to 928 MHz

■ Voltage: 6.5 to 15 VDC

■ Current requirement: 1.0 to 0.4 A

■ Output formats: Wiegand and RS-232



■ Weight: 37.5 oz. (1.06 kg)

■ Dimensions: 8 x 9.5 x 1.125 in. (203 x 241 x 286 mm)

■ Color: Beige

■ Cable: 9 conductor stranded (#22 AWG) with continuous shield for typical installations


Long Range Proximity Reader

32

Access C

ontrol

LNL-XF

The Lenel OpenCard Reader series includes the most flexible readers in the industry. A single

reader supports all applicable ISO standards (14443 and 15693), including the new U.S.

Government PIV standard. All Lenel OpenCard Readers contain both 125 kHz proximity and

13.56 MHz contactless smart card support in one unit. Lenel OpenCard Readers provide

compatibility with Lenel prox, HID® proximity, GE/CASI ProxLite®, XceedID proximity, AWID

proximity and most 13.56 MHz technologies (see chart on back). By offering 125 kHz and 13.56

MHz technology in one reader, Lenel protects customers from obsolescence in the transition from

proximity technology to contactless smart card technology. Even if customers want to continue

using proximity technology today, the new Lenel OpenCard Readers offer economical migration to

the latest in smart card technology while accommodating their budget or timeline.

Product Applications

The mullion reader is perfect for narrow-rail mullion installations. It can be used as a sleek and

unobtrusive unit, as well as for standard wall-mounted reader applications.

The mid-range reader is ideal for mounting on single gang US electrical boxes. The read range

provided by this attractive package makes it the standard of choice for most wall-mounted

installations.

The mid-range keypad reader is ideal for higher security applications where two-factor (card

and/or PIN) authentication is desired. This reader may be mounted on a standard U.S. single gang

electrical box, or used in any typical wall-mounted application.


■ Compatibility: compatible with industry standard 125 kHz proximity and 13.56 MHz contactless

technologies

■ Easy migration

■ Optional GSA approved PIV support

■ Modular design: allows easy removal or addition of keypad in the field

■ Read range: up to 8 in. (203 mm), depending on card technology

■ Integrated tamper detection

■ Tri-state LED (red, green, amber): Visual indicator and audio feedback representing status and

activity information

■ Accommodates interior, exterior, metal and non-metal installation environments

■ Lifetime warranty against defective workmanship and materials

Lenel OpenCard™ Readers

33

Acc

ess

Con

trol

LNL-XF

34

Supported Standards and Technologies125 kHz Proximity

ISO 15693 13.56 MHz Vicinity

Reader OptionsStandard ReadersLNL-XF1100DLNL-XF2100DLNL-XF2110D

SpecificationsFrequencyStandardsOperating TemperaturePhysical Dimensions (HWD)

LNL-XF1100D:

LNL-XF21XXD:

WeightLNL-XF1100D:LNL-XF21XXD:

Voltage RangeMax. Current Requirement

LNL-XF1100D:LNL-XF2100D:LNL-XF2110D:

MaterialSystem InterfaceCable SpecificationCabling DistanceCertifications

LenelProxGE CASI ProxLite®

HID® ProximityXceedID™

AWID® Proximity

XceedID ISO-X™ Secure SectorInfineon my-d® Secure SectorHID iCLASS® Serial NumberInfineon my-d® Serial NumberInside Contactless PicoTag® Serial No.ST Microelectronics® Serial NumberTexas Instruments Tag-It® Serial No.

125 kHz and 13.56 MHzISO 15693 and ISO 14443-31° to 151°F (-35° to 67°C)

5.85” x 1.72” x 1.14” (149 cm x 43 cm x 29 mm)5.85” x 4.5” x 1.45” (149 cm x 114 cm x 37 mm)

0.6 lbs. (.27 kg)1.05 lbs. (.48 kg)8 to 16 VDC

Avg. 95 mA DC, Peak 254 mA DCAvg. 95 mA DC, Peak 218 mA DCAvg. 120 mA DC, Peak 215 mA DCPBT PolymerWiegand (Standard)22AWG 12 Conductor ShieldedWiegand Output: 500 ft. (152m)FCC CertificationCanadian FCC CertificationUL 294-Listed, CE-MarkedR&TTE Directive (15 EU Countries)GSA Approved for FIPS-201 (PIV models only)

ISO 14443 13.56 MHz Proximity

Max. Read Range125 kHz:

LNL-XF1100D, up to 5” (127 mm)LNL-XF21XXD, up to 8” (203 mm)

13.56 MHz:ISO 15693

• LNL-XF1100D, up to 4.5” (114 mm)• LNL-XF21XXD, up to 6” (152 mm)

ISO 14443 MIFARE Standard• LNL-XF1100D, up to 2” (51 mm)• LNL-XF21XXD, up to 3” (76 mm)

ISO 14443 MIFARE DESFire• LNL-XF1100D, up to 1.5” (38 mm)• LNL-XF21XXD, up to 2.5” 64 mm)

ISO 14443 PIV• LNL-XF1100D, up to 1” (25 mm)• LNL-XF21XXD, up to 2” (51 mm)

*Maximum read range depends on credential type/form factor andinstallation conditions

Lenel OpenCard Format SectorXceedID Secure MIFAREDESFire® Serial NumberMIFARE® Serial NumberU.S. Government PIV Data Model

Description(Standard Black) Mullion mount; Wiegand output(Standard Black) 1-Gang US mount; Wiegand output(Standard Black) 1-Gang US mount; Keypad; Wiegand output

PIV ReadersLNL-XF1100D-PIVLNL-XF2100D-PIVLNL-XF2110D-PIV

Access C

ontrol

Lenel OpenProx™ Reader

35

LNL-XF1050The Lenel OpenProx Reader is the most flexible 125 kHz proximity card reader in the industry. It supports all major 125 kHz card standards. The Lenel OpenProx Reader provides compatibility with HID® proximity, GE/CASI ProxLite®, XceedID® proximity, AWID®, and LenelProx card formats. Lenel provides a single compact reader that can integrate diverse proximity card populations, or allow seamless transition from one 125 kHz technology to another.

Product ApplicationsThe mullion reader is perfect for narrow-rail mullion installations. It can be used as a sleek and unobtrusive unit, as well as in standard wall-mounted reader applications.

Features and Functionality■ Compatible with industry standard 125 kHz proximity technology■ Easy Migration■ Tri-state LED (red, green, amber): Visual indicator and audio feedback representing status and

activity information■ Accommodates interior, exterior, metal and non-metal installation environments■ Lifetime warranty against defective workmanship and materials

SpecificationsFrequency:Operating temperature:Physical dimension (HWD):

Weight:Voltage range:Power supply:Max. current requirement:

Material:Max. read range:

System interface:Cable specification:

Cabling distance:

Certifications:

125 kHz-31° to 151°F (-35° to 67°C)4.1” x 1.72” x 1.0”(104 cm x 44 cm x 25 mm)0.45 lbs. (.20 kg)5 to 16 VDCLinear DCAvg. 55 mA DCPeak 167 mA DCPBT PolymerUp to 3” (76 mm)** Maximum read range depends on credential type/form factor and installation conditionsWiegandRecommended cable is 22AWG (18AWG preferred), minimum 5 conductor shielded (4 plus shield)in retrofit installs. Wiegand Output 18 AWG: 500 ft. (152 m)Wiegand Output 22 AWG: 200 ft. (60 m)FCC CertificationCanadian FCC CertificationUL 294 and 1076-listedR&TTE Directive (15 EU Countries)CE-marked

Acc

ess

Con

trol

Three-Factor Biometric Reader Recessed Enclosure

36

LNL-BIO-007-ENC

The LNL-BIO-007 Reader Recessed Enclosure is designed to mount any model of the BIO-007

series of readers. The enclosure comes standard with a brushed aluminum finish plate.

Alternatively, it can be ordered with black or gold finish plates to match BIO-007 reader color

options. The enclosure comes standard with six ¾” to 1” (19 to 25 mm) conduit knock outs,

security screws and a security tool. The recessed enclosure contains a built-in 24VAC input to

12VDC output power for a single BIO-007 reader. The enclosure can be used for new or existing

installations.

Specifications

Enclosure

■ Dimensions (approximate): 11.25 x 5.25 x 3.25 in. (286 x 133 x 83 mm)

■ Color: Gray

■ Finish plate: brushed aluminum is standard; black or gold optional

■ Includes reader mounting screws and hardware

■ Suggested mounting height - approximately 54” (1371.6 mm) from floor to top of unit

Linear Power Supply/Charger

■ 12VDC output

■ 2 Amps of continuous supply current @ 12VDC

■ 24 VAC transformer requirements per unit

■ 24 VAC/40VA for 12VDC output (not included)

■ Filtered and electronically regulated outputs

■ Short circuit and thermal overload protection

■ Built-in charger for sealed lead acid or gel type battery backup

■ Maximum charge current: 0.3 Amp

■ Zero voltage drop upon transfer to battery backup

■ AC input and DC output LED indicators

■ Lifetime warranty

Board

■ Dimensions (approximate): 3.0 x 2.5 x 1.5 in. (76 x 64 x 38 mm)

Access C

ontrol

LNL-BIO-007

The LNL-BIO-007 access reader is durable, dependable, and competitively priced. Designed for

indoor or outdoor use, the reader combines three forms of authentication: proximity reader, PIN

pad, and fingerprint sensor. The PIN and fingerprint authentication are standard; the proximity

reader is optional. All three reader modes can be configured to support timezone control.

The BIO-007 transmits a credential number to the Intelligent System Controller through a Wiegand

interface. The ISC then delivers fingerprint template(s) to the BIO-007 though the LNL-500B

Biometric Gateway and matching is performed within the BIO-007. The results of the match are

then returned to the Gateway for appropriate action and reporting to OnGuard.

The indestructible keypad is based on BaranTec’s patented Piezo Switch technology. The

power-driven Bioscrypt fingerprint sensor utilizes a powerful DSP processor. Unlike other biometric

products, this sensor is hidden until a valid credential and/or PIN is presented. Then the fingerprint

sensor door opens. After verification occurs, the fingerprint sensor door closes into a secure

vandal-resistant position.


■ 12 VDC power supply @ 1.8 amps

■ Three factors of authentication: card, PIN, fingerprint

■ Data output: Wiegand Data1/Data0

■ Biometric output: RS-485

■ Keypad interface: 8-bit burst

■ Keypad layout: 4 across & 3 down

■ Brushed aluminum finish, also available in black finish

■ Vandal-resistant design

■ Weather-resistant housing

■ Three LEDs for reader status

■ Audible indicator buzzer

■ 24-month warranty

Three Factor Biometric Reader

37

Acc

ess

Con

trol

LNL-BIO-007

38

Reader OptionsLNL-BIO007LNL-BIO007-HIDLNL-BIO007-HIDW

Reader FinishesStandardAlternate



Temperature:Humidity:

MechanicalCase:Dimensions:Weight:Read range:Mounting height:

TechnologySupported:Sensor:FAR:FRR:

Approvals

Reader unit with PIN pad and fingerprint sensor.Reader unit with built-in HID technology (HID 125 KHz proximity sensor).Outdoor reader with thermal heat kit. Recommended for readers installed outdoors, where temperature is below -4° F. (-20° C)

Silver finishBlack finish (To specify the alternate finish, add the following suffix to the part number: -B)

* The BIO-007 reader is for use in low voltage, power-limited, class 2 circuits only.12 VDC @ 1.6 amps (12 VDC @ 1.8 amps with use of thermal heat kit)

32° to 122° F (0° to 50°C), operating. (-4° to 158° F / -20° to +70°C with use of thermal heat kit)0 to 95% RHNC

Brushed aluminum construction, anodized3.94 x 8.92 x 2.6 in. (100 x 227 x 66 mm)4.71 lbs. (2.1365 kg) nominal1 to 2 in. ( 25 to 51 mm)Between 48 and 54 in. (1219 and 1372 mm) recommended

Encoding: 125 KHz HID proximity cardsBioscrypt(False Acceptance Rate) 0.2%(False Rejection Rate) 1.0%CE-Marked

LNL-2000 Intelligent System Controller

LNL-500B LNL-1300/1320RS - 485 multidrop

BIO-007

Proximity and keypad Wiegand output to reader interface module (6 wires)

RS-485 to fingerprint sensor (3 wires)

Access C

ontrol

LNL-826S121NN

Lenel Systems International’s indestructible keypads offer the ultimate in strength and durability

where PIN entry and maximum security are required. With a tamperproof keypad and a

weatherproof, solid brushed aluminum casing, Lenel indestructible keypads are designed to

function dependably even in harsh climates or high-risk environments. The keypads are compliant

with the Americans with Disabilities Act (ADA) guidelines.

The LNL-826S121NN 12-position keypad is configured to have two keys across by six keys down,

and is intended for use in mullion mounting applications. It features an eight-bit word data output

format, 12 to 28 volts DC power, 30 mA current draw, and red and green status LEDs. The keypad

uses solid state piezo sounder technology to provide audible feedback. A natural aluminum color

is standard, but other colors are also available upon request.

Features

■ Anodized graphics

■ Waterproof and dustproof IP68

■ 2 x 6 in. (51 x 152 mm) configuration keypad type

■ Click and lock mounting screws

Specifications

■ Protocol: 8 bit word output


■ Power: 12 to 28 VDC

■ Current: 30 mA

■ Environment: IP68; 100% RH

■ Temperature: -40° to 158 F° (-40° to +70° C)

■ FCC-certified, CE-marked

■ Brushed aluminum construction; other colors available optionally

Application Note

Lenel keypad readers can be used either by themselves or in conjunction with almost any other

reader technology. The eight-bit burst output format enables these keypads to be wired in parallel

with any other reader technology, including proximity, magnetic stripe, MIFARE, Vicinity, etc.

Detailed wiring information is provided in the Lenel hardware installation manuals.

Indestructible Keypad

39

Acc

ess

Con

trol

LNL-834S121NN

Lenel Systems International’s indestructible keypads offer the ultimate in strength and durability

where PIN entry and maximum security are required. With a tamperproof keypad and a

weatherproof, solid brushed aluminum casing, Lenel indestructible keypads are designed to



The LNL-834S121NN 12-position keypad is configured to have three keys across by four keys

down, and is intended for single gang electrical box installation. It features an eight-bit word data

output format, 12 to 28 volts DC power, 30 mA current draw, and red and green status LEDs. The

keypad uses solid state piezo sounder technology to provide audible feedback. A natural aluminum

color is standard, but other colors are also available upon request.

Features



■ 3 x 4 in. (76 to 102 mm) configuration keypad type


Specifications

■ Protocol: 8 bit word output



■ Current: 30 mA


■ Temperature: -40° to 158° F (-40° to +70° C)

■ FCC-certified, CE-marked


Application Note

Lenel keypad readers can be used either by themselves or in conjunction with almost any other

reader technology. The eight-bit burst output format enables these keypads to be wired in parallel

with any other reader technology, including proximity, magnetic stripe, MIFARE, Vicinity, etc.

Detailed wiring information is provided in the Lenel hardware installation manuals.

Indestructible Keypad

40

Access C

ontrol

BT-LPKP-NDK

The Lenel BT-LPKP-NDK indestructible keypad reader offers the ultimate in strength and durability

where proximity and PIN entry are required. With a tamperproof keypad and a weatherproof, solid

brushed aluminum casing, Lenel indestructible keypads are designed to function dependably even

in harsh climates or high-risk environments. The keypads are compliant with the Americans with

Disabilities Act (ADA) guidelines.

The model BT-LPKP-NDK reader is equipped with two electronically interlocked devices – a Lenel

format proximity reader and a piezoelectric keypad – contained within a single, nearly

indestructible, metal housing. The 12-position keypad is configured to have three keys across by

four keys down, and is designed for both international and U.S. single gang electrical box

mounting applications. It features an eight-bit word data output format, 5 to 12 volts DC power, 120

mA current draw, and red and green status LEDs. The keypad uses solid state piezo sounder

technology to provide audible feedback. A natural aluminum color is standard, but other colors are

also available upon request.

Features





Specifications

■ Protocol: Wiegand + 8 bit word output



■ Current: 120 mA



■ Read Range: 2 to 3 in. (51 to 76 mm)

■ FCC-Certified/UL, ULC- and CE-mark pending


Indestructible Keypad with Lenel Proximity

41

Acc

ess

Con

trol

BT-ASPKP-HID/iCLASS

The Lenel BT-ASPKP-HID/BT-ASPKP-iCLASS indestructible keypad reader offers the ultimate in

strength and durability where proximity and PIN entry are required. With a tamperproof keypad

and a weatherproof, solid brushed aluminum casing, Lenel indestructible keypads are designed to



The model BT-ASPKP-HID/BT-ASPKP-iCLASS reader is equipped with two electronically

interlocked devices – an HID format proximity or iCLASS reader, and a piezoelectric keypad –

contained within a single, indestructible, metal housing. The 12-position keypad is configured to

have two keys across by five keys down, and is designed for both international and U.S. single

gang electrical box mounting applications. It features an eight-bit word data output format, 5 to 12

volts DC power, 150 mA current draw, and red and green status LEDs. The keypad uses solid

state piezo sounder technology to provide audible feedback. A natural aluminum color is standard,

but other colors are also available upon request.

Features





Specifications

■ Protocol: Wiegand + 8 bit word output



■ Current: 150 mA



■ Read Range: 1 to 2 in. (25 to 51 mm)

■ FCC-Certified Part 15, CE-marked


■ Available in either 125 MHz proximity or 13.56 iCLASS

Indestructible Keypad with HID® Proximity or iCLASS™ 13.56

42

Access C

ontrol

LNL-CK

The LNL-CK Lenel Command Keypad integrates a 32-character backlit LCD display with a

16-position keypad and a reader port. The command keypad serves as a command reader,

a reader from which user commands can be issued to execute local I/O functions. Reader

command programming is accomplished using the OnGuard System Administration application.

The LNL-CK display indicates time in either 12 or 24-hour clock format. The format is automatically

chosen based on the regional settings of the computer on which the Communication Server is

running. The LNL-CK display also provides command status and other text feedback during reader

operations. For example, when performing the Extended Held Open command, the LNL-CK

displays the countdown time before the Held Open time is reached, as well as basic intrusion

arm/disarm functions.

The LNL-CK communicates with the Lenel Intelligent System Controller (ISC) either through direct,

multidrop, 2-wire RS-485 communication to the ISC, or through a reader port of a Lenel Dual

Reader Interface Module (LNL-1320).

The LNL-CK may be configured in one of three ways: as a stand-alone RS-485 device, as an

alternate reader to a primary reader, or as a reader device connected to the Wiegand input of a

LNL-1320. In any of these modes, an optional reader with a Data1/Data0 or clock/data output may

be connected to the LNL-CK to provide Card Only, Card or PIN, or Card and PIN capability.


■ 32-character backlit LCD display

■ 16-position keypad with 4 function keys

■ Supports all “approved for use” reader technologies from Lenel that communicate using

Data1/Data0 or clock/data communication

■ Arm, Disarm, Bypass and Force Arm alarm mask groups

■ Extended Held Open Time via Command Keypad with feedback

■ Reader command support

■ Works with all Lenel Intelligent System Controllers (LNL-500, LNL-1000, LNL-2000)

■ Supports reader mode changes by Timezone control

■ Supports PIN mode on LNL-CK keypad. With optional reader, all other modes are also

supported

■ Ability to adjust backlight on/off times

■ Flash upgradable firmware

■ Built-in DIP switch selectable RS-485 termination

Lenel Command Keypad

43

Acc

ess

Con

trol

LNL-CK

44

SpecificationsPrimary Power

Voltage:Current:

ReaderPower:LED Control:Buzzer Control:Interface:


Humidity:

12 VDC +/- 15%175 mA terminal only

Pass-through (non-regulated)2-wire or 1-wire bicolor LEDAvailable with 1-wire LED control2-wire RS-485, or Wiegand

Operating: 32° to 122° F (0° to 50° C)Storage: -4° to 158° F (-20° to 70° C)0% to 95% RHNC

PhysicalColor:Dimensions:Weight:Mounting:

TechnologyCommunication:

Approvals

RS-485

LNL-CK

LNL-CK

AlternateReader

AlternateReader

Intelligent System

Controller

LNL-1320

2-WIRE RS-485 SERIAL BUS

White6.75 x 5.00 x 1.0 in. (172 x 127 x 25 mm)14 oz. (400 g) nominalSurface-mount or 3-gang box

RS-485: up to 4000 ft. (1219 m) max,24 AWG, 100 ohm impedanceWiegand: up to 500 ft. (152 m) max,18 AWG stranded wire

FCC approved, UL-listed, CE-marked

Access C

ontrol

LNL-AL400ULXThe LNL-AL400ULX is a power-limited supply/charger that will convert a 115 VAC 50/60 Hz input, into a power-limited 12 VDC or 24 VDC output (see specifications).

Features■ LNL-CTX enclosure (gray with Lenel logo)■ Offline power supply (AL400ULXL) mounted on custom Lenel bracket■ Tamper switch■ Lenel lock with two keys■ 16 stand-offs and 16 screws■ Battery leads■ Installation instructions■ Can accommodate up to 2 Lenel Access Control modules

Specifications■ UL 294 and 1076-listed■ Switch selectable 12 VDC or 24 VDC power limited output■ Class 2 rated■ Input 115 VAC 50/60 Hz, 1.45 amp■ Maximum charge current 0.7 amp■ 4 amps continuous supply current at 12 VDC■ 3 amps continuous supply current at 24 VDC■ Filtered and electronically regulated outputs■ Built-in charger for sealed lead acid or gel type batteries (Optional ABT-12)■ Automatic switchover to standby battery when AC fails■ AC input and DC output LED indicators■ AC fail supervision (form C contacts)■ Low battery supervision (form C contact)■ Low battery disconnect prevents batteries from deep discharge■ Thermal overload protection■ Short circuit protection■ Primary circuit switch for incoming 115 VAC■ Power supply board dimensions: 4.3 x 7 x 1.8 in. (108 x 178 x 44 mm)■ Enclosure dimensions: 12 x 16 x 4.5 in. (304 x 406 x 114 mm)

Ordering InformationPart Number:LNL-AL400ULXABT-12LNL-CTX

UL-Listed, Multi-Agency Power Supply/Charger

45

Description:115 VAC configurationBattery backup optionCabinet only, with lock 12 x 16 x 4.5 in. (304 x 406 x 114 mm)

Acc

ess

Con

trol

LNL-AL600ULX-4CB6The LNL-AL600ULX-4CB6 is a power-limited supply/charger that will convert a 115 VAC 60 Hz input, into a non-power-limited 12 VDC or 24 VDC output (see specifications)

Features■ LNL-CTX-6 enclosure (gray with Lenel logo)■ Offline power supply (AL600ULXL) mounted on custom Lenel bracket■ Power limited distribution module (PD4-CB)■ Tamper switch■ Lenel lock with two keys■ 48 stand-offs and 48 screws■ Battery leads■ Installation instructions■ Can accommodate up to 6 Lenel Access Control modules

Specifications■ UL 294 and 1076-listed■ Switch selectable 12 VDC or 24 VDC non-power limited output■ Input 115 VAC 60 Hz, 1.9 amp■ Maximum charge current 0.7 amp■ 6 amps continuous supply current at 12 VDC or 24 VDC■ Filtered and electronically regulated outputs■ 100 mV peak output voltage ripple■ 4 individual circuit breaker outputs■ Surge protected outputs■ Built-in charger for sealed lead acid or gel type batteries (Optional ABT-12)■ Automatic switchover to standby battery when AC fails■ Zero voltage drop when switched over to battery backup■ AC input and DC output LED indicators■ AC fail supervision (form C contacts)■ Low battery and battery presence supervision (form C contact)■ Thermal overload protection■ Short circuit protection■ Primary circuit switch for incoming 115 VAC ■ Power supply board dimensions: 4.3 x 7 x 1.8 in. (108 x 178 x 44 mm)■ Enclosure dimensions: 24 x 18 x 4.5 in. (610 x 457 x 114 mm)

Ordering InformationPart Number:LNL-AL600ULX-4CB6ABT-12LNL-CTX-6

UL-Listed, Multi-Agency Power Supply/Charger

Description:115 VAC configurationBattery backup optionCabinet only, with lock 24 x 18 x 4.5 in. (610 x 457 x 114 mm)

46

Access C

ontrol

LNL-400X-CE220

The LNL-400X-CE220 is a power-limited supply/charger that will convert a 230 VAC, 60 Hz input

into a power-limited, 12 VDC or 24 VDC output (see specifications).

Features

■ LNL-CTX enclosure (gray with Lenel logo)

■ AL400ULB power supply

■ Tamper switch

■ Lenel lock with two keys

■ 16 standoffs and 16 screws

■ Battery leads

■ Installation instructions

■ Can accommodate up to 2 Lenel Access Control modules

Specifications

■ CE-marked

■ Switch-selectable, 12 VDC or 24 VDC, power-limited output

■ Class 2 rated

■ Input 230 VAC, 60 Hz, 1.45 amp

■ Maximum charge current 0.7 amp

■ 4 amps continuous supply current at 12 VDC

■ 3 amps continuous supply current at 24 VDC


■ Built-in charger for sealed lead acid or gel type batteries (Optional ABT-12)

■ Automatic switchover to standby battery when AC fails


■ AC fail supervision (form C contacts)

■ Low battery supervision (form C contact)

■ Low battery disconnect prevents batteries from deep discharge

■ Thermal overload protection

■ Short circuit protection

■ Primary circuit switch for incoming 230 VAC

■ Power supply board dimensions: 4.3 x 7 x 1.8 in. (108 x 178 x 44 mm)

■ Enclosure dimensions: 12 x 16 x 4.5 in. (304 x 406 x 114 mm)

Ordering Information

Part Number:LNL-400X-CE220

ABT-12

LNL-CTX

CE-Marked Power Supply/Charger

47

Description:230 VAC configuration

Battery backup option

Cabinet only, with lock 12 x 16 x 4.5 in. (304 x 406 x 114 mm)

Acc

ess

Con

trol

LNL-600X6-CE220

The LNL-600X6-CE220 is a power-limited supply/charger that will convert a 230 VAC, 60 Hz input

into a non-power-limited, 12 VDC or 24 VDC output (see specifications)

Features

■ LNL-CTX-6 enclosure (gray with Lenel logo)

■ AL600ULB power supply

■ Power-limited distribution module (PD4-CB)

■ Tamper switch

■ Lenel lock with two keys

■ 48 standoffs and 48 screws

■ Battery leads

■ Installation instructions

■ Can accommodate up to 6 Lenel Access Control Modules

Specifications

■ CE-marked

■ Switch-selectable, 12 VDC or 24 VDC, non-power-limited output

■ Input 230 VAC, 60Hz, 1.9 amp

■ Maximum charge current 0.7 amp

■ 6 amps continuous supply current at 12 VDC or 24 VDC


■ 100 mV peak output voltage ripple

■ 4 individual circuit breaker outputs

■ Surge protected outputs

■ Built-in charger for sealed lead acid or gel type batteries (Optional ABT-12)

■ Automatic switchover to standby battery when AC fails

■ Zero voltage drop when switched over to battery backup


■ AC fail supervision (form C contacts)

■ Low battery and battery presence supervision (form C contact)

■ Thermal overload protection

■ Short circuit protection

■ Primary circuit switch for incoming 230 VAC

■ Power supply board dimensions: 4.3 x 7 x 1.8 in. (108 x 178 x 44 mm)

■ Enclosure dimensions: 24 x 18 x 4.5 in. (610 x 457 x 114 mm)

Ordering Information

Part Number:LNL-600X6-CE220

ABT-12

LNL-CTX-6

CE-Marked Power Supply/Charger

Description:230 VAC configuration

Battery backup option

Cabinet only, with lock 24 x 18 x 4.5 in. (610 x 457 x 114 mm)

48

CAM-20Z704-USB / CAM-21Z704-USBP

The Lenel USB Image CaptureKit offers many important features for capturing badgeholder

images. The capture kit includes a high resolution CCD (NTSC or PAL) camera with software

zoom capabilities, a fully-synchronized cool white built-in flash, a tripod system with a powered

base, TWAIN-compliant software, a USB communication cable and a universal power cable. The

camera is USB 2.0-compliant, producing high resolution live video for image capture using the

OnGuard ID CredentialCenter™ application by Lenel. The latest version of the TWAIN device

driver enables the user to control the camera’s zoom capabilities from within OnGuard. The built-in

flash illuminates both video fields evenly to minimize the effect of poor lighting environments.


■ USB 1.1 (USB 2.0 compliant)

■ Cool white LEDs replace hot incandescent lights & last up to 100 times longer

■ Single control button for camera & LED, transparent & seamless via USB

■ TWAIN-compliant software interacts with OnGuard and other imaging software

■ Rapid image download compared to still image cameras

■ Real-time subject setup and scene adjustment

■ Freeze frame perfection

USB Capture Kit

49

USB Out S-Video Out

Video Out

Power • LED• Camera/Remote

Credential

CAM-20Z704-USB / CAM-21Z704-USBP

50

Camera OptionsCAM-20Z704-USB

CAM-21Z704-USBP

SpecificationsElectrical

CCD sensor:Active pixels (HxV):Horizontal resolution:Sensitivity:Signal to noise ratio:Gamma:Gain:Synchronization:Back light compensation:Shutter speed (fixed):

Mirror mode:Positive/negative mode:Iris:Video output:

Camera Power:Camera Power Consumption:

USB VideoVideo Capture:

High Resolution Still Image Capture:

Supported Image Formats:Software Drivers:

USB Bandwidth:

USB Standard:PC Minimum System Requirements:

USB NTSC CCD Image Capture Kit - includes CCD NTSC camera, synchronized cool white lights, telescoping stand, USB cable, universal 110/220 VAC power supply and device drivers.USB PAL CCD Image Capture Kit - includes CCD PAL camera, synchronized cool white lights, telescoping stand, USB cable, universal 110/220 VAC power supply and device drivers.

1/4” (6.35 mm) Sony interline CCD768 x 494 NTSC, 752 x 582 PAL>470 (TVL)1 lux at 30 IRE (F1.4 AGC Max)>48 dBDefault 0.45Automatic or manualInternal Automatic or offNTSC: Auto/Man (1/60 to 1/10000)PAL: Auto/Man (1/50 to 1/10000)Selectable on/offSelectable on/offAuto or manualUSB 1.1, USB 2.0 compliantCVBS 1Vp-p (75ohm) & Y/C (S-Video)12 VDC (9.0 to 15 VDC)5.4 watts

30 fps CIF (352 x 288)15 fps VGA (640 x 480)NTSC: 640 x 480320 x 240 RGB 24 BitPAL: 768 x 576384 x 288 RGB 24 BitRGB 16, 24 bits, YUV422, YUV12WDM streaming class driver compatible with Direct Show & VFWTWAIN DriverOpen Utility SoftwareAdjustable 0.5 Mbps to 7.5 Mbps in 0.5 Mbps increments1.1 (USB 2.0 Compliant)PC with a Pentium Processor 600 MHz with MMX and 128MB of memoryUSB PortMicrosoft Windows 98, ME, 2000, XP32 bit VGA Display Adapter

MechanicalDimensions (WxHxD):

Lens:Lens mount:FOV:Focus Range:Zoom:Durability:

EnvironmentalAmbient Operating Temperature:Storage Temperature:Kit Power:

Base 10.5 x 3.2 x 11.5 in.(267 x 83 x 292 mm)Telescope pole 29 to 54 in. (737 to 1372 mm)(floor ~ center of camera)Camera w/ lights 6.3 x 3.5 x 4.5 in. (159 x 89 x 114 mm)F1.4 to 2.8, FL=4.0 to 64.0IntegratedH= 47° (wide), 3° (tele)Infinity~1.0m (tele) to 0.01m (wide)Optical to 16 x, Digital to 128 xZoom, Focus & Iris: more than 500Kcycles at room temperature

14° to 131° F (-10° C to 55° C)

-4° to 140° F (-20° C to 60° C)90 VAC to 240 VAC 50/60 HzAuto-sensing24 watts

Cre

dent

ial

Overview

Lenel offers several powerful and easy-to-use video recording options for a multitude of digital

video recorder and network video recorder applications. With flexibility to meet needs ranging from

high-resolution to expansive online storage, Video Recorders from Lenel present many affordable

options for those considering upgrading an existing analog installation to those looking for a fresh,

network-centric solution. Video Recorders are available in stand-alone or integrated deployments.

OnGuard GO! configurations provide powerful stand-alone systems for customers needing a DVR

or NVR application. Additionally, OnGuard GO! customers can add access control and ID badging

to the stand-alone video recorder without needing an additional server or database! No matter the

application, Video Recorders from Lenel offer a powerful opportunity to address a critical staple in

any security program.

Video Boards (DVB-408 & DVB-444)

Lenel offers two video boards, the DVB-408 and the DVB-444. Each board supports

industry-leading MPEG-4 recording compression. The affordable DVB-408 has eight channels of

capacity, while the DVB-444 has four channels and includes four on-board processors for more

efficient compression. Both board options give customers the ability to start and expand robust

video systems.

DVC-ST (4U)

The DVC-ST is a reliable, rack-mountable digital video recorder with several recording and storage

options. The DVC-ST supports analog video recording with up to two DVB-408s, or up to two

DVB-444s. Each DVC-ST has three hard drive bays for SATA, allowing customers to expand to

greater than one terabyte of online storage. The DVC-ST includes a 4U, 19-inch rack mount digital

storage recorder with Windows XP Professional, 10/100/1000 Ethernet, one 80 GB internal

OS-only hard drive (optional 3 additional data hard drives), DVD/CD ROM, 1.44 floppy and mouse.

DVC-EX (3U)

The DVC-EX is a high-powered machine offering the most expansive storage capacity of any DVR

available. With eight hard drive bays, the DVC-EX has capacity for four terabytes of online

storage. In addition to storage, the DVC-EX also allows the customer to configure RAID 5 data

redundancy. The DVC-EX includes a 3U, 19-inch rack mount digital storage recorder with

Windows XP Professional, 10/100/1000 Ethernet, one 80 GB OS-hard drive (optional data hard

drives, maximum of eight), DVD/CD ROM, 1.44 floppy, mouse and rack mount rail.

Video Recorders for OnGuard VideoManager™

51

DVC-ST Chassis (4U)

DVR / GO!

DVC-EX Chassis (3U)

DVR / NVR / GO!

Video

DVC-ES

The DVC-ES is an entry-level solution that is a great fit for small DVR applications. Available with a

single DVB-408, the DVC-ES comes in a tower form factor for easy placement in any security

office. It includes a tower chassis, digital storage recorder with Windows XP Professional,

10/100/1000 Ethernet, one 80 GB internal OS-only hard drive (optional 2 additional data hard

drives), CD ROM, 1.44 floppy and mouse.

DVC-1U

The DVC-1U is a powerful and easy to use Network Video Recorder (NVR) with a small footprint.

Occupying 1/4 to 1/3 the space of traditional video recorders, the 1U form factor can easily fit in

empty rack slots, rarely requiring additional racks to house it. The DVC-1U includes a 1U

rack-mount chassis, digital storage recorder with Windows XP Professional, two 10/100/1000

Ethernet ports, one 80 GB internal OS-only hard drive, one 500 GB internal Data Storage Drive

(optional 2 additional data hard drives), and CD/RW-DVD/R.

DVC-DELL

The DVC-DELL features a trusted hardware standard supporting an entry-level NVR application.

The Dell solution offers IT-centric security operations the ability to develop a video program using

a factory-tested server configuration that optimizes performance and ensures reliability.

Stand-alone Video Recorders - OnGuard GO! (DVC-ST, DVC-EX & DVC-1U)

Customers looking for stand-alone digital video recorders can use a Lenel video recorder with the

OnGuard GO! configurations. The stand-alone video recorder’s OnGuard GO! configuration has

the administration applications and database on the video recorder, saving money by not requiring

a separate security server to launch the most powerful security system available. Furthermore,

customers can take the single stand-alone video recorder and add OnGuard’s robust Access

Control, Fire & Intrusion and ID Management applications, as well as countless software options.

For customers expanding an existing analog environment by upgrading to a DVR or by embracing

IP by migrating to network video, Lenel video recorders offer the flexibility to initiate an integrated

security architecture by focusing on stand-alone digital video, then expanding the system when the

time is right.

DVC-ES Chassis

DVR

DVC-DELL

NVR / GO!

DVC-1U

NVR / GO!

52

Vide

o

ICT 220 DN Plus

Full D1 resolution with a true de-interlaced filter produces brilliant, artifact-free video. Using

state-of-the-art MPEG-4 (video) and synchronized ADPCM (audio) encoding, the ICT 220 provides

superior video quality and improved network performance. The ICT 220 outperforms the

competition, when compared to other network cameras using still picture encoding technology

such as MJPEG or Wavelet. The ICT 220 utilizes superior cross bit rate encoding technology, ixBR

Control®, to deliver powerful bandwidth control. Using ixBR, digital video streams more fluidly

because the data is encoded and streamed at a constant rate, yet it retains all the rich data of

variable bit rate encoding!

Key Features

■ 3 Axis MiniDome (360° horizontal x 90° vertical)

■ Powerful MPEG-4 video compression

• Supports up to 30 frames per second at full D1 resolution

■ True de-interlaced filter

■ Bidirectional G.711 and G.726 audio communication

■ Synchronized full-duplex one channel audio and video

■ State-of-the-art CPU, separate codec and embedded software

■ Intelligent bit rate control (flexible for difficult network environments)

■ Embedded streaming server and embedded Web server

■ Motion-detected and event-triggered alarm processing

■ Sensor-triggered recording and FTP:

• One (1) alarm input

• One (1) relay output

■ Supports a wide range of network protocols

■ 1/3 in. (8 mm) Sony Super HAD CCD

• 410K CCD Day-Night with IR cut filter varifocal lens

• 410K CCD standard varifocal lens

• 270K CCD fixed lens

■ True Day-Night capability

■ System time management

• RTC with Time Server synchronization

■ Security support:

• User authentication

• 128-bit encrypted data stream (selectable, for added security)

Fixed Dome Digital Network Camera

53

Video

ICT 220 DN Plus

54

Resolution ■ NTSC: 30 fps

■ PAL: 25 fps

RCA Analog Display CableRCA analog cable is for analog video output from camera module

inside of network camera. Use with handheld video monitor for quick

and easy focus and field of view setup. Connects to video output.

Power and Ethernet■ Power supply input voltage: 100~250 VAC 50-60 Hz

■ Power supply output voltage: 12 VAC @ 3.3 A

■ AC power cable capacity: 250 VAC, 10~16 A

■ Camera power input: 7~23V DC Max 8 Watts

■ Mid span PoE injector power input: 12V DC 1 Amp

■ Power supply connector type: N (male)

■ Ethernet: 10/100Base-T autosensing

Package Contents■ Camera

■ Power supply

■ Type N male power connector with leads

■ Single port mid span PoE injector

■ Power cords

■ CD-ROM with software & user guide

■ RCA analog display cable

■ Install template and mounting screws

Camera Dimensions■ 5.6 x 5 in. (142 mm x 128 mm)

Certifications■ UL

■ ULC

■ FCC

■ CE

■ CCC

■ RoHS

■ NTSC: 704x480 / 352x240 / 176x144

■ PAL: 704x576 / 352x288 / 176x144

Model – ICT220 DN Plus ( 410KCCD- Day-Night)

ICT2201DN

ICT2202DN

ICT2203DN

ICT2204DN

Model- ICT220S (410KCCD )

ICT2201S

ICT2202S

ICT2203S

ICT2204S

Region

Americas- Asia Pacific

Australia

UK

Europe

Part Number by Model and RegionModel- ICT220S ( 270KCCD )

ICT2201

ICT2202

ICT2203

ICT2204

Lens

Varifocal 4.0 – 9.0 mm F1.2

Varifocal 4.0 – 9.0 mm F1.2

Fixed 3.8 mm F2.0 manual focus

Minimum Illumination (Lux)

0.1Lux / f=1.4 (AGC 0n)

0.1Lux / f=1.4 (AGC 0n)

0.3Lux

Model

ICT220DN Plus

ICT220S

ICT220

Lens

Vide

o

ICT 230 DN Plus

Full D1 resolution with a true de-interlaced filter produces brilliant, artifact-free video. Using

state-of-the-art MPEG-4 (video) and synchronized ADPCM (audio) encoding, the ICT 230 provides

superior video quality and improved network performance. The ICT 230 outperforms the

competition, when compared to other network cameras using still picture encoding technology

such as MJPEG or Wavelet. The ICT 230 utilizes superior cross bit rate encoding technology, ixBR

Control®, to deliver powerful bandwidth control. Using ixBR, digital video streams more fluidly

because the data is encoded and streamed at a constant rate, yet it retains all the rich data of

variable bit rate encoding!

Key Features

■ Powerful MPEG-4 video compression

• Supports up to 30 frames per second at full D1 resolution

■ True de-interlaced filter

■ Bidirectional G.711 and G.726 audio communication

■ Synchronized full-duplex one channel audio and video

■ State-of-the-art CPU, separate codec and embedded software

■ Intelligent bit rate control (flexible for difficult network environments)



■ Sensor-triggered recording & FTP:

• One (1) alarm input

• One (1) relay output

■ Supports a wide range of network protocols

■ 1/3 in. (8 mm) Sony Super HAD CCD

• 410K CCD

• 270K CCD

■ True Day-Night capability

■ RoHS-compliant product



■ Security support:


• 128-bit encrypted data stream (selectable, for added security)

■ Lens not included

Digital Network Camera

55

Video

ICT 230 DN Plus

56

Resolution ■ NTSC: 30 fps

■ PAL: 25 fps

■ NTSC: 704x480 / 352x240 / 176x144

■ PAL: 704x576 / 352x288 / 176x144

■ Minimum Illumination 0.1 LUX / F=1.4 (AGC-on)


■ ULC

■ FCC

■ CE

■ CCC

■ RoHS

Environment■ Recommendation: For indoor use unless in housing

Temperature

■ 41~122 °F (5~50 °C) Optimum

■ 21~65 °F (-4~140 °C) Endurable

Humidity

■ 8~80% RH Optimum

■ 0~90% RH Endurable

Power and Ethernet■ Power supply input voltage: 100~250 VAC 50-60 Hz

■ Power supply output voltage: 12 VAC @ 3.3 A

■ AC power cable capacity: 250 VAC, 10~16 A

■ Camera power input: 7~23V DC Max 8 Watts

■ Mid span PoE injector power input: 12V DC 1 Amp

■ Power supply connector type: N (male)



■ Power supply

■ Single port mid span POE injector

■ Power cords

■ CD-ROM with software and user guide

■ Mounting stand

■ Type N Power connector with leads

Camera Dimensions (without lens)■ 5.3 x 2.4 x 2.2 in. (135 x 60 x 57 mm)

Model – ICT230 DN ( 410KCCD- Day-Night)

ICT2201DN

ICT2202DN

ICT2203DN

ICT2204DN

Model- ICT230S ( 270KCCD )

ICT2201S

ICT2202S

ICT2203S

ICT2204S

Region

Americas- Asia Pacific

Australia

UK

Europe

Part Number by Model and Region

Vide

o

ICT 240 DN

The ICT 240 is a full-featured IP speed dome that delivers the best of both worlds: performance

and affordability. This outdoor speed dome provides full D1 resolution (704X480 NTSC, 704X576

PAL) with a true de-interlaced filter that produces immaculate video. Stealth Spin Technology®

uses precisely machined gears, delivering unmatched smooth and accurate movement for virtually

silent operation. Using state-of-the-art MPEG-4 (video) and synchronized ADPCM (audio)

encoding, the ICT 240 provides superior video quality and improved network performance. The

ICT 240 outperforms the competition, when compared to other network cameras using still picture

encoding technology such as MJPEG or Wavelet. The ICT 240 uses ixBR® superior cross bit rate

encoding technology. Using ixBR, digital video streams more fluidly because the data is encoded

and streamed at a constant rate, yet it retains all the data of variable bit rate encoding!

Built for maximum long-life performance, the ICT 240 deploys a high-quality slip-ring, tested for

over 20 million spins!

Key Features

■ Extremely silent, outdoor speed dome IP camera

■ 1/4 in. Sony Ex-view CCD

■ Filter changeable type day and night

■ IP66 water-resistant

■ 26X optical with 12X digital zoom (selectable)

• Optional: 18X optical with 12X digital zoom

■ State-of-the-art CPU, codec and embedded software

■ Superior video compression – MPEG-4

■ Maximum 30 frames per second at D1 resolution with de-interlaced filter

■ Bidirectional audio communication – up (ADPCM), down (PCM)

■ Synchronized one channel audio and video data transmission

■ Intelligent bit rate control for flexible network deployment

■ Enhanced image quality

■ MPEG-4



■ Easy recording and playback on client PC

■ Sensor-triggered

• Four (4) alarm inputs

• Two (2) relay outputs

■ Auto-flip video – on/off configuration

■ Wide range of network protocols supported



■ Security support


• 128-bit encrypted streaming data for additional security (selectable)

Outdoor IP Digital Speed Dome

57

Video

ICT 240 DN

58

Resolution■ NTSC: 30 fps

■ PAL: 25 fps

■ NTSC: 768x494

■ PAL: 752x582

■ Horizontal Resolution: >480 TVL


■ FCC

■ CE

■ CCC

■ RoHS

■ ULC

EnvironmentTemperature

■ 41~60 °F (5~50 °C) Optimum

■ -4~140 °F (-20~60 °C) Endurable

Humidity



Video Quality■ Minimum luminance – Normal: 0.7 lux

■ Minimum luminance – Night Mode: 0.1 lux

■ Day-Night ICR: Auto/Day/Night

■ Luminance Signal-to-Noise Ratio: >50 dB

■ BLC: On/Off

Lens■ f1.6~3.8 f3.5-91.0 mm

■ Minimum video distance: .32 m (w) / 4.92 ft. (1.5 m) telephoto

Power and Ethernet■ PS input voltage: 100~250 VAC 50-60 Hz

■ PS output : 18-32 VAC @ 1.3 A

■ AC power cable: 250 VAC, 10~16 A

■ Power consumption: 24 watts maximum

■ Ethernet: 100Base-T


■ External housing (IP66)

■ Wall mount and hardware

■ CD-ROM with Software & User Guide

■ Quick Installation Guide

Weight■ 5 lbs (1.9 kg)

Pan Tilt■ Pan: 350° per second continuous rotation

■ Tilt Rotation: 0-90°

■ Accuracy: 0.024°

Privacy Zones and Sectors■ 24 programmable zones

■ 8 programmable sector patternsVi

deo

ICT 250 DN

The ICT 250 is a full-featured IP speed dome that delivers the best of both worlds: performance

and affordability. This indoor speed dome provides full D1 resolution (704X480 NTSC, 704X576

PAL) with a true de-interlaced filter that produces immaculate video. Stealth Spin Technology®

uses precisely machined gears, delivering unmatched smooth and accurate movement for virtually

silent operation. Using state-of-the-art MPEG-4 (video) and synchronized ADPCM (audio)

encoding, the ICT 250 provides superior video quality and improved network performance. The

ICT 250 outperforms the competition, when compared to other network cameras using still picture

encoding technology such as MJPEG or Wavelet. The ICT 250 uses ixBR® superior cross bit rate

encoding technology. Using ixBR, digital video streams more fluidly because the data is encoded

and streamed at a constant rate, yet it retains all the data of variable bit rate encoding!

Built for maximum long-life performance, the ICT 250 deploys a high-quality slip-ring, tested for

over 20 million spins!

Key Features

■ Stealth Spin Rotation technology

■ 1/4 in. Sony Ex-view CCD

■ Filter changeable type day and night

■ 26X optical with 12X digital zoom (selectable)

• Optional 18X optical zoom with 12X digital zoom

■ State-of-the-art CPU, codec and embedded software

■ Superior video compression – MPEG-4

■ Maximum 30 frames per second at D1 resolution with de-interlaced filter

■ Bidirectional audio communication – up (ADPCM), down (PCM)


■ Intelligent bit rate control for flexible network deployment


■ MPEG-4



■ Easy recording and playback on client PC

■ Sensor-triggered

• Four (4) alarm inputs

• Two (2) relay outputs

■ Auto-flip video – on/off configuration






• 128-bit encrypted streaming data for additional security (selectable)

Indoor IP Digital Speed Dome

59

Video

ICT 250 DN

60


■ PAL: 25 fps

■ NTSC: 768x494

■ PAL: 752x582

■ Horizontal resolution: >480 TVL


■ FCC

■ CE

■ CCC

■ RoHS

■ ULC

EnvironmentTemperature

■ 41~122 °F (5~50 °C ) Optimum

■ -4~140 °F (-20~60 °C) Endurable

Humidity



Video Quality■ Minimum luminance – Normal: 0.7 lux

■ Minimum luminance – Night Mode: 0.1 lux

■ Day-Night ICR: Auto/Day-Night

■ Luminance Signal-to-Noise Ratio: >50 dB

■ BLC: On/Off

Lens■ f1.6~3.8 f3.5-91.0 mm

■ Minimum video distance: .32 m (w) / 4.92 ft. (1.5 m) telephoto


■ PS output : 18-32 VAC @ 1.3 A





■ Ceiling mount bracket and cover


Weight■ 5 lbs (1.9 kg)

Pan Tilt■ Pan: 350° per second continuous rotation

■ Tilt rotation: 0-90°

■ Accuracy: 0.024°

Privacy Zones and Sectors■ 24 programmable zones

■ 8 programmable sector patternsVi

deo

ICT 510 Video Server

The ICT 510 single channel audio/video server supports full D1 resolution coupled with a true

de-interlaced filter to produce brilliant, artifact-free video. Owing to state-of-the-art MPEG-4 (video)

and synchronized ADPCM (audio) encoding, the ICT 510 provides superior video quality and

improved network performance. The ICT 510 outperforms the competition, when compared with

other audio video server using still picture encoding technology such as MJPEG or Wavelet. The

ICT 510 provides superior cross bit rate encoding technology, ixBR Control®, which delivers

powerful bandwidth control. Using ixBR, digital video streams more fluidly because the data is

encoded and streamed at a constant rate, yet it retains all the rich data of variable bit rate

encoding!

Key Features

■ MPEG-4 video compression

■ Supports video frame rates of up to 30 fps

■ Full D1 resolution with de-interlaced filter

■ Bidirectional G7.11 audio communication


■ Intelligent bit rate control for various network environments


■ MPEG-4 and JPEG dual streaming for mobile network

■ Embedded streaming server

■ Embedded Web server


■ Remote PTZ control via RS-485

■ Sensor-triggered one alarm input and one relay output






• Encrypted streaming data for additional security (selectable)

Single Channel AV Server

61

Video

ICT 510 Video Server

62


■ PAL: 25 fps

■ NTSC: 704x480, 356x240, 176x120

■ PAL: 704x576, 352x288, 176x144


■ FCC

■ CE

■ CCC

■ RoHS

■ ULC

Environment (indoor use only)Temperature

■ 41~122 °F (5~50 °C) Optimum

■ -4~140 °F (-20~60 °C) Endurable

Humidity




■ PS output : +12 V @ 1.3 A

■ Server input: 7~23 VAC




Package Contents■ Server

■ Regional specific power supply

■ Power cords


■ Mid span POE injector

■ Type N Power connector with leads

PC Requirement Remote Viewing (minimum) ■ P-4 1.2 GHz Processor

■ 256 MB RAM

■ Windows 2000, Windows XP Professional / Home

■ IE 5.5

■ Video monitor minimum resolution: 1024 x 768


Vide

o

63

Corporate Headquarters

1212 Pittsford-Victor RoadPittsford, NY 14534-3820TEL: 585.248.9720FAX: 585.248.9185

United Kingdom Office & Training Center

95 Maybury RoadWoking, SurreyGU21 5JL UKTEL: +44.1483.815230FAX: +44.1483.815231

Hong Kong Office & Training Center

Room 1401-2, 14/FChinachem Johnston Plaza178-186 Johnston PlazaWanchai, Hong Kong, SAR, ChinaTEL: +852.2893.2886FAX: +852.2893.7373

Dubai Office & Training Center

Building 5EB - Office 550Dubai Airport Free ZoneDubai, UAETEL: +971.4.609.1019FAX: +971.4.609.1021

Middle East Office & Training Center

Assaydeh Center, Main RoadMansourieh, Al MatnLebanonTEL: +961.4.409184FAX: +961.4.409569

Lenel Systems International is a leading provider of software and turnkey security systems for corporate and government markets. We focus on developing products that enable organizations to effectively protect and manage their people, property and assets by maximizing IT and infrastructure investments.

When we launched the OnGuard integrated solution in 1995, our pioneering efforts brought the power of leading-edge technology, the reliability of software industry standards, and the flexibility of open systems architecture to a historically proprietary security market. We swiftly moved to a leadership position by developing and delivering business solutions that protect people, property and assets. Today we are recognized as the global leader and de facto standard in software and integrated systems for commercial and government security markets.

With nearly 15,000 system installations in 90 countries worldwide, we boast a blue chip customer base with a strong presence in a broad range of vertical markets. We have earned numerous awards for technology innovation, growth, market leadership and customer satisfaction. Lenel is part of UTC Fire & Security, a business unit of United Technologies Corp. (NYSE:UTX).

Lenel’s world headquarters are located in Rochester, New York. We also have major operational centers in London, Hong Kong, Beirut and Dubai, numerous satellite offices, and sales and support coverage worldwide.

64

Contact Information

www.lenel.com Lenel Systems International, Inc.1212 Pittsford-Victor RoadPittsford, New York 14534 USATel 585.248.9720 Fax 585.248.9185www.lenel.com

© 2007 Lenel Systems International, Inc.

Lenel is a global leader in the development and delivery of scalable, integrated systems for

the commercial security market, with over 15,000 system implementations in more than 90

countries. Lenel is headquartered in Rochester, N.Y. USA, with sales and support coverage

in all major world markets. Lenel is part of UTC Fire & Security, a $4.7 billion company that

provides fire safety and security solutions to more than one million customers worldwide.

Headquartered in Connecticut, UTC Fire & Security is a business unit of United Technologies

Corp., which provides high technology products and services to the building and aerospace

industries worldwide. More information about Lenel and UTC Fire & Security can be found on

their Web sites at http://www.lenel.com and http://www.utcfireandsecurity.com.

The possibilities are endless.

Date post:	15-Jun-2018
Category:	Documents
Upload:	dinhanh
View:	237 times
Download:	6 times

Lenel Systems International Inc. -...

Documents