LEO

LEO 8065

LED VERSION:Class A/A+/A++Luminaire suppliedwith integrated LED modulesthat cannot be replaced

A++ A+ A

HALOGEN VERSION:Class DQT14/G9

D

Leo80

EU Regulation 874/2012 - Illumination equipment energy classes

.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black

• Luminaire for installation on wall – surface mounted.• Configuration: die-cast aluminium structure, EN AB-47100

alloy (low copper content). Diffuser: transparent glass or lens with silkscreen border.

• Double layer coating for high resistance to corrosion: the aluminium components are painted with a doublecoat using powders that are compliant with QUALICOATstandards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a secondfinishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effectsalkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.

• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: I• Installation: wiring through a cable holder (5mm

C0 / C180 C90 / C270

cd / 1000 lm

351132 8859 3933 2221 14

= 1.5˚+ 1.5˚ = 20.0˚+ 20.0˚

Max Medm1.002.003.004.005.00

528

lux lux

20000

90˚

60˚

30°

3°

110

□ 8

2

Leo80

65

12313643White 2700K lm LED 129 ≠ lm OUTPUT 22

12311643White 3000K lm LED 138 ≠ lm OUTPUT 24

12316343White 4000K lm LED 148 ≠ lm OUTPUT 26

@4000K

C0 / C180 C90 / C270

cd / 1000 lm

1600

90˚

60˚

30°

3411 95 43 22 1

= 20.0˚+ 20.0˚ = 25.0˚+ 25.0˚

Max Medm1.00

2.003.004.005.00

45

lux lux

40°

110

□ 8

2

12313650White 2700K lm LED 129 ≠ lm OUTPUT 24

12311650White 3000K lm LED 139 ≠ lm OUTPUT 26

12316450White 4000K lm LED 148≠ lm OUTPUT 28

@4000K

65

Leo80 - Unidirectional - 3° - Convex LensLight Source: Power LED / 1,1W / Total power 2,5W / CRI>80 / 100÷240V / Integral electronic power supply

Leo80 - Unidirectional - 40°Light Source: Power LED / 1,1W / Total power 2,5W / CRI>80 / 100÷240V / Integral electronic power supply

Leo80

C0 / C180 C90 / C270

cd / 1000 lm

800

90˚

120˚

60˚

= 20.0˚+ 20.0˚ = 25.0˚+ 25.0˚

3411 95 43 22 1

Max Medm1.00

2.003.004.005.00

45

lux lux

40°

110

□ 8

2

12313951White 2700K lm LED 2x129 ≠ lm OUTPUT 2x24

12311951White 3000K lm LED 2x139 ≠ lm OUTPUT 2x26

12316451White 4000K lm LED 2x148 ≠ lm OUTPUT 2x28

@4000K

65

C0 / C180 C90 / C270

cd / 1000 lm

10000

90˚

120˚ 1533 2359 41132 92528 368

= 1.5˚+ 1.5˚ = 20.0˚+ 20.0˚

Max Medm5.004.003.002.001.00

21

lux lux

40°

3°

110

□ 8

2

12313253White 2700K lm LED 2x129 ≠ lm OUTPUT 22+24

12312253White 3000K lm LED 2x139≠ lm OUTPUT 24+26

12316453White 4000K lm LED 2x148≠ lm OUTPUT 26+28

@4000K

65

Leo80 - Bidirectional - 40°Light Source: Power LED / 2,2W / Total power 4W / CRI>80 / 100÷240V / Integral electronic power supply

Leo80 - Bidirectional - Combined: 3° (Convex Lens) + 40°Light Source: Power LED / 2,2W / Total power 4W / CRI>80 / 100÷240V / Integral electronic power supply

Leo80

65

5030

acc. code

prod. code 237

1232743

1232744

1232745

1232750

1232751

1232752

1232753

12311643 •12311650 •12311951 •12312253 •12313253 •12313643 •12313650 •12313951 •12316343 •12316450 •12316451 •12316453 •

Leo80

Accessories: Leo80

237SPD: (SURGE PROTECTION DEVICE) 275Vac MAXIMUM DISCHARGE CURRENT 10KA (8/20µs) MAXIMUM OPERATING CURRENT 5ASUITABLE FOR SERIES CONNEC-TION - IP66

LEO 16065

LED VERSION:Class A/A+/A++Luminaire suppliedwith integrated LED modulesthat cannot be replaced

A++ A+ A

METAL HALIDE VERSION:Class A+HIT-CE/G12

A+

Leo160

EU Regulation 874/2012 - Illumination equipment energy classes

.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black

The fitting is equipped with 2 cable input

Protection againstimpact.IK 05 - 7,00 joule

Wall fitting

• Luminaire for installation on wall – surface mounted.• Configuration: die-cast aluminium structure, EN AB-47100

alloy (low copper content). Diffuser: lens or transparent or sandblasted glass fixed to the structure through a robotic gluing system.

• Double layer coating for high resistance to corrosion: the aluminium components are painted with a doublecoat using powders that are compliant with QUALICOATstandards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a secondfinishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of thealuminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effectsalkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.

• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: I• Installation: wiring through two cable holders

(8mm

Leo160

2°

4°

40°

220

□ 16

022

0□

160

220

□ 16

0

C0 / C180 C90 / C270

cd / 1000 lm

20000

90˚

60˚

30°

1639635 410282 182159 102102 66

= 1.0˚+ 1.0˚ = 23.0˚+ 23.0˚

Max Medm1.00

2.003.004.005.00

2542

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

600

90˚

60˚

30°

1530583 382259 170146 9693 61

= 2.0˚+ 2.0˚ = 20.0˚+ 20.0˚

Max Medm1.00

2.003.004.005.00

2333

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

80

90˚

60˚

30°

20979 5235 2320 1313 8

= 21.0˚+ 21.0˚ = 25.0˚+ 25.0˚

Max Medm1.00

2.003.004.005.00

316

lux lux

65

65

65

@4000K

12315144White 2700K lm LED 574 ≠ lm OUTPUT 112

12324144White 3000K lm LED 617 ≠ lm OUTPUT 120

12324044White 4000K lm LED 663 ≠ lm OUTPUT 129

1233543HIT-CE 35W G12

1233550HIT-CE 35W G12

Leo160 - Unidirectional - 2° - Convex Lens

Leo160 - Unidirectional - 4° - Convex Lens

Leo160 - Unidirectional - 40°

Electronic ballast

Electronic ballast

Light Source: Power LED / 6,2W / Total power 9,8W / CRI>80 / 110÷240V / Integral electronic power supply

Leo160

65°

220

□ 16

0

C0 / C180 C90 / C270

cd / 1000 lm

750

90˚

60˚

30°

11252 2823 1213 78 4

= 32.0˚+ 32.0˚ = 43.0˚+ 43.0˚

Max Medm1.00

2.003.004.005.00

208

lux lux

65

@4000K

12315152White 2700K lm LED 574 ≠ lm OUTPUT 257

12324152White 3000K lm LED 617 ≠ lm OUTPUT 276

12324052White 4000K lm LED 663 ≠ lm OUTPUT 297

Leo160 - Unidirectional - 65°Light Source: Power LED / 6,2W / Total power 9,8W / CRI>80 / 110÷240V / Integral electronic power supply

Leo160

75°

4°

220

□ 16

022

0□

160

4°

220

□ 16

0

C0 / C180 C90 / C270

cd / 1000 lm

600

90˚

120˚

61146 96259 170583 3822333 1530

= 2.0˚+ 2.0˚ = 20.0˚+ 20.0˚

Max Medm5.004.003.002.001.00

93

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

60

90˚

60˚

120˚

11456 2828 1314 79 5

= 28.0˚+ 28.0˚ = 36.0˚+ 28.0˚

Max Medm1.00

2.003.004.005.00

225

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

600

90˚

60˚

120˚

1530583 382259 170146 9693 61

= 2.0˚+ 2.0˚ = 20.0˚+ 20.0˚

Max Medm1.00

2.003.004.005.00

2333

lux lux

65

65

65

1233554HIT-CE 35W G12

1233547HIT-CE 35W G12

1233545HIT-CE 35W G12

Leo160 - Bidirectional - Combined: 4° (Convex Lens) + 75°

Leo160 - Bidirectional - Sandblasted Glass

Leo160 - Omnidirectional - 4° - Convex Lens

Electronic ballast

Electronic ballast

Electronic ballast

Leo160

40°

65°

220

□ 16

022

0□

160

220

□ 16

0

C0 / C180 C90 / C270

cd / 1000 lm

80

90˚

60˚

120˚

20979 5235 2320 1313 8

= 21.0˚+ 21.0˚ = 25.0˚+ 25.0˚

Max Medm1.00

2.003.004.005.00

316

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚160

11252 2823 1213 78 4

= 32.0˚+ 32.0˚ = 43.0˚+ 43.0˚

Max Medm1.00

2.003.004.005.00

208

lux lux

C0 / C180 C90 / C270

cd / 1000 lm

60

90˚

60˚

120˚

11456 2828 1314 79 5

= 28.0˚+ 28.0˚ = 36.0˚+ 28.0˚

Max Medm1.00

2.003.004.005.00

225

lux lux

65

65

65

1233553HIT-CE 35W G12

1233548HIT-CE 35W G12

@4000K

12315454White 2700K lm LED 4x574 ≠ lm OUTPUT 4x257

12324454White 3000K lm LED 4x617 ≠ lm OUTPUT 4x276

12324354White 4000K lm LED 4x663 ≠ lm OUTPUT 4x297

Leo160 - Omnidirectional - 40°

Leo160 - Omnidirectional - Sandblasted Glass

Leo160 - Omnidirectional - 65°

Electronic ballast

Electronic ballast

Light Source: Power LED / 24,8W / Total power 28,6W / CRI>80 / 110÷240V / Integral electronic power supply

65

LED VERSION:Class A/A+/A++Luminaire suppliedwith integrated LED modulesthat cannot be replaced

A++ A+ A

METAL HALIDE VERSION:Class A+HIT-CE/G12

A+

LED VERSION:Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced

EU Regulation 874/2012 - Illumination equipment energy classes

.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black

The fitting is equipped with 2 cable input

Protection againstimpact.IK 05 - 7,00 joule

Bollard light

• Luminaire for installation on post – surface mounted.• Configuration: die-cast aluminium structure, EN AB-47100

alloy (low copper content), extruded aluminium post. Glass diffuser: transparent or sandblasted fixed to the structure through a robotic gluing system.

• Double layer coating for high resistance to corrosion: the aluminium components are painted with a doublecoat using powders that are compliant with QUALICOATstandards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a secondfinishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effectsalkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.

• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: I• Installation: wiring through two cable holders

(8mm

160

290

/550

/90

0 220

160

290

/550

/90

0 220

160

290

/550

/90

0 220

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

90

-1-2 10m

1

0

Lux H = 0,4 m

21

171

29

2-1

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

600

-2-4 20m

2

0

Lux H = 0,4 m

4-2

1

1131241

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

75

-1-2 10m

1

0

Lux H = 0,4 m

1351

29

2-1

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

75

-1-2 10m

1

0

Lux H = 0,4 m

16

211 26

2-1

1233547 HIT-CE 35W G12

1237147 HIT-CE 70W G12

65

65

65

@4000K

12335136HIT-CE 35W G12

123151137White 2700K lm LED 2x574 ≠ lm OUTPUT 2x207

123241137White 3000K lm LED 2x617 ≠ lm OUTPUT 2x223

123240137White 4000K lm LED 2x663 ≠ lm OUTPUT 2x240

Leo160 on post - Bidirectional - Transparent Glass

Leo160 on post - Bidirectional - Transparent Glass

Leo160 on post - Bidirectional - Sandblasted Glass

Leo160 on post

Light Source: Power LED / 12,4W / Total power 16W / CRI>80 / 110÷240V / Integral electronic power supply

Electronic ballast

Electronic ballast

Electronic ballast

160

290

/550

/90

0 220

160

290

/550

/90

0 220

160

290

/550

/90

0 220

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

90

-1-2 10m

1

0

Lux H = 0,4 m

2636

11

56

2-1

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

320

-2-4 20m

2

0

Lux H = 0,4 m

4-2

1

1131241

C0 / C180 C90 / C270

cd / 1000 lm

90˚

60˚

120˚

75

-1-2 10m

1

0

Lux H = 0,4 m

1121

36

2-1

C0 / C180 C90 / C270

cd / 1000 lm

60

90˚

60˚

120˚

11456 2828 1314 79 5

= 28.0˚+ 28.0˚ = 36.0˚+ 28.0˚

Max Medm1.00

2.003.004.005.00

225

lux lux

1233548 HIT-CE 35W G12

1237148 HIT-CE 70W G12

65

65

65

@4000K

12335117HIT-CE 35W G12

123154118White 2700K lm LED 4x574 ≠ lm OUTPUT 4x207

123244118White 3000K lm LED 4x617≠ lm OUTPUT 4x223

123243118White 4000K lm LED 4x663≠ lm OUTPUT 4x240

Leo160 on post - Omnidirectional - Transparent Glass

Leo160 on post - Omnidirectional - Transparent Glass

Leo160 on post - Omnidirectional - Sandblasted Glass

Leo160 on post

Light Source: Power LED / 24,8W / Total power 28,6W / CRI>80 / 110÷240V / Integral electronic power supply

Electronic ballast

Electronic ballast

Electronic ballast

12425 H. 70 mm

12455 H. 330 mm

12490 H. 680 mm

Leo160 on post / Poles

Leo160 on post

Top installation on pole

XXX

65

5030

160

□ 15

2

Incorrect Fixing MethodCorrect Fixing Method Correct Fixing MethodBollard �xed on plinth + �xing boltsBollard �xed on plinth + plug Do not �x the bollard directly on the ground

acc. code

prod. code 131 237

12425 •12455 •12490 •1233543

1233545

1233547

237SPD: (SURGE PROTECTION DEVICE) 275Vac MAXIMUM DISCHARGE CURRENT 10KA (8/20µs) MAXIMUM OPERATING CURRENT 5ASUITABLE FOR SERIES CONNEC-TION - IP66

131BASE PLATE AND FIXING BOLTS152 x 152 x H 160mm

Incorrect Fixing MethodDo not fi x the bollard directly on the groundwithout plinth

Correct Fixing MethodBollard fi xed on plint + suitable installation screws

Correct Fixing MethodBollard fi xed on plinth + fi xing bolts

Accessories: Leo160 - Leo160 on post

Leo160 - Leo160 on post

www.flos.com