+ All Categories
Home > Documents > Level 3 Special Project Space- lling Curves Machine... · Level 3 Special Project Space- lling...

Level 3 Special Project Space- lling Curves Machine... · Level 3 Special Project Space- lling...

Date post: 24-May-2020
Category:
Upload: others
View: 11 times
Download: 0 times
Share this document with a friend
1
Level 3 Special Project Space-filling Curves Prerequisite Concepts Concept 12 Key Concepts Concept 14 This study focuses on creating a Wunderlich Type I curve from the pattern created in the previous study. In the artifact shown below, the 9 patterns which make up the board are connected using red 1-bit bricks. Also note, that the 9 patterns are themselves connected internally. Before building this artifact it is recommended that you complete all Vitruvia exercises for Concept 14. Copyright: Victor Winter ([email protected])
Transcript
Page 1: Level 3 Special Project Space- lling Curves Machine... · Level 3 Special Project Space- lling Curves Prerequisite Concepts Concept 12 Key Concepts Concept 14 This study focuses on

Level 3 Special Project

Space-filling Curves

Prerequisite Concepts Concept 12

Key Concepts Concept 14

This study focuses on creating a Wunderlich Type I curve from the pattern created in the previousstudy. In the artifact shown below, the 9 patterns which make up the board are connected using red 1-bitbricks. Also note, that the 9 patterns are themselves connected internally. Before building this artifact itis recommended that you complete all Vitruvia exercises for Concept 14.

Copyright: Victor Winter ([email protected])

Recommended