Lever-Tumbler Mechanical Deadbolt Lock for Utility Closet Access Doors and Panels
Investment cast prison paracentric key (must be ordered separately)
Bolt Keepers (must be ordered separately)
Mortise With Dust Box7010KD
Mortise 7010K
Surface Applied7010SA
Application The 7010 is the industry standard lever tumbler deadbolt widely used in correctional facilities for maximum security locking of utility access panels.
The 7010 is recommended for key controlled locking of electrical and plumbing access panels, roof hatches, and miscellaneous small openings within the secure perimeter of a jail or prison.
The 7010 is not recommended for use on full size doors. Both locking and unlocking is accomplished with a proprietary RRBLS paracentric type key. The key cannot be removed from the lock unless the bolt is fully extended and deadlocked. This safety feature alerts the user to an obstruction in the bolt keeper or receiver which would jeopardize security.
National Fire
Equipment Ltd.
40 Edilcan DriveConcord Ontario, L4K 3S6
Phone: ( ) 905 761-6355
3.000"
2.437"
3.687"1.250"
4.250" 1.750"
0.500" Bolt projection
0.625" Bolt throw
0.375" Bolt projection
0.625" Bolt throw
0.750"0.906"
1.500"
1.50" Bolt
0.750" Bolt
2.225"
Paracentric Key Mechanical Deadbolt for Utility Closet Access Doors and Panels
Standard Features• Industrystandardtemplate• Investmentcaststeellockcase,zincplated• Stainlesssteeldeadbolt• Onepiecebronzeparacentriccylinder• Boltretractedprojection1/2”• Boltthrow:5/8”• Boltsize:1-1/2”x3/4”• Fourmountingscrewsincluded
Accessories (mustbeorderedseparately)• Prison key –Investmentcastbronzealloy–specifyquantityofkeysrequired
•Bolt keepers 7010K standardmortise 7010KD mortisewithdustbox 7010SA surfaceapplied
Lock Mountings (mustbeorderedseparately)Theaccesspanelmanufacturerusuallyprovidesamountingplateforthe7010lock.OtherwiseRRBLSfactorymountingsareavailableforhollowmetalandplatedoors.Theyareconstructedof7-gaugesteelandelectroplatedforcorrosionresistance.
Mountingisremovableforcleaningandrepairoflock.Escutcheonsmustbepurchasedseparately.Allmountingscrewsareincluded.Consultfactorydirectlyfortemplateoflockmountings.
•Hollow Metal Mounting (specifyHMMounting)–foruseonhollowmetaldoors.
• PlateMounting (specifyPMounting)–foruseonsteelplatedoors.Allowslocktoberimmounted.
Model & Keying
7012 Keyed one side
7016 Keyed both sides
See our "Hand of Locks
Reference Guide" for description
and symbol.
See the "Lock Mountings" section on this page
for description and symbol.
See the "Accessories"
section on this pagefor description
and symbol.
Lock Mounting AccessoriesHand of Lock
7012 – – –LHR HM Mounting (specify accessories here)
Ordering Information Model Description
7012 Keyedoneside
7016 Keyedbothsides
7010, 03-24-09
Ordering Example
Security WarningWithlever-tumblerlockskeyedontwosides(i.e.7016),itisimportantthattheenduseralwaysremovethekeyfromalockeddoor.Ifthekeyisleftinthelock,forinstanceonthenon-securesidetofacilitatefrequentunlocking,theboltcanberetractedfromtheoppositebyturningthecylinderwithacommontool.(e,g,screwdriver).Thisposesanunacceptableandpotentiallydangeroussecurityrisk!
7010
Note:Thisillustrationisforinformationonly.Donotuseforconstruction.ConsultR.R.BrinkCustomerServicePersonnelfortemplates.
National Fire
Equipment Ltd.
40 Edilcan DriveConcord Ontario, L4K 3S6
Phone: ( ) 905 761-6355