Date post: | 02-Jan-2016 |
Category: |
Documents |
Upload: | vicente-malvica |
View: | 376 times |
Download: | 72 times |
3D TRAINING3D TRAINING
UseBookmarks
ForNavigation
Published January 3rd 2011Published January 3rd, 2011Updated February 10th, 2011
3D TRAINING INDEX3D TRAINING INDEX
TABLE OF CONTENTS 02 TELEVSION 3D LAYOUT SECTION 17
SUBJECT PAGE SUBJECT PAGETABLE OF CONTENTS 02
3D FUNDAMENTAL SECTION 03• 3D Fundamentals (What is 3D?) 04
LG 3D TV 3D broadcasting 05
TELEVSION 3D LAYOUT SECTION 17• 55LX6500 Circuit Board Layout 18• 47LX9500 Circuit Board Layout 19• 55LX6500 Connector Identification 20
47LX6500 Connector Identification 21• LG 3D TV 3D broadcasting 05• LG 3D Emitter & Glasses 06• Active glasses 3DTV components 07• 3D Active Glasses Type 08• T CON with 3D Formatter 09
• 47LX6500 Connector Identification 21• 47LX9500 Connector Identification 22• 55LX6500 T-CON/3D Board Components Identified 23• 47LX9500 T-CON/3D Board Components Identified 24• T CON/3D Board LVDS P802 to Main Board• T-CON with 3D Formatter 09
• 3D Video viewing range and Compatible 3D Formats 10
TROUBLESHOOING 3D SECTION 11
• T-CON/3D Board LVDS P802 to Main Board P7800 Voltage and Diode Check 25
• 55LX6500 Main Board Layout 26• 47LX6500 Main Board Layout 27• 47LX9500 Main Board Layout 28
• 3D Troubleshooting: 3D Not Working (Pg 1 of 4) 12
• 3D Troubleshooting: 3D Not Working (Pg 2 of 4) 13
S
y• Main Board Connector P7800 to T-CON/3D • P802 Voltage and Diode Check 29
REFERENCE SECTION 30• LX6500 Series 3D Troubleshooting:
3D Not Working (Pg 3 of 4) 14• LX9500 Series 3D Troubleshooting:
3D Not Working (Pg 4 of 4) 15• Eye Tiredness Information 16
• Ref. 1: HDMI 1.4 Information 31• Ref. 2: HDMI 1.4 3D Frame Packing Structure 32• Ref. 3: HDMI 1.4 3D Frame Packing Structure 33
February 3D TV Training2
Eye Tiredness Information 163D Training Conclusion Page 34
3D FUNDAMENTAL SECTION3D FUNDAMENTAL SECTION
This section will give you an understanding 3D as it relates to Televisions.
February 3D TV Training3
3D Fundamentals (What is 3D?)3D Fundamentals (What is 3D?)Each eye looks at an image from slightly different angles. Therefore, the brain takes these two different images and translates them into one image giving us depth perception. This is difficult to reproduce on a 2 dimensional screen We have to come up with a scheme that will allow us toreproduce on a 2 dimensional screen. We have to come up with a scheme that will allow us to see the same image from two different angles giving us 3D effects.
If the two images were added together without
Note: The Left and Right eye are actually seeing the same image but from a different angle, but for this explanation one is shown inverted from the other for clarity purposes simply to show there
g gthe brain doing the calculations to combine them, they would appear out of focus.
February 3D TV Training4
for this explanation one is shown inverted from the other for clarity purposes simply to show there is a difference between the two images seen by each eye.
LG 3D TV 3D broadcastingLG 3D TV 3D broadcasting3D for All types of broadcasting signals1. Input of broadcasting signal HD SD Onlinep g g2. Press “3D” button for mode change3. Select type of input source4. In case 3D looks *abnormal, press “L/R
Select” on remote and select “R/L”.
Broadcasting Broadcasting Video
Input
Input
Input(1)
*Abnormality may be caused by reversed L/R order of the input signal. If TV already in Left/Right change to Right/Left or vice versa.
USBPort
ComponentCompositeRF, S-Video
HDMIComponent
RF
(2)(4)
(3)
Top & Bottom Side by Side CheckerBoard
Single frame Sequential
February 3D TV Training5
Note: Picture behind the menu is showing a side by side format.
LG 3D Emitter & GlassesLG 3D Emitter & Glasses
Convenient Emitter built-in to TVIR Sync
• Wider viewing angle• Longer Viewing distance• Longer battery life
600
600
7m
(1h 50m charging / 40h battery life)• Better sync performance
IR EmitterLocation
User friendly Glasses1) L-frame for glasses users 3
Power ButtonPress On LED blinks 1 timePress Off LED blinks 3 times
Auto shutoff after 1 min ) g2) UV coating to prevent scratch 3) LED indicator for user convenience4) Easy to Recharge with USB port
1
2
of no sync
4USB Charge Port(8 i i i USB)
Power LEDRed when charging
G
Power LEDWhen discharged
Bli k f 1 i th h t ff
February 3D TV Training6
(8-pin mini USB) Green when charged Blinks for 1 min. then shutoff
Active glasses 3DTV componentsActive glasses 3DTV components Shutter Actuator circuit board
1Hr. 50min
Battery
IR
Charge Time
IR Receiver
40Hr. Charge
*TN LCD shutter
3D Sync signalTwisted State light passes On State light blocked
Syncsignal USB Charge Port
(8-pin mini USB)
TV with built in IR Transmitter
light passes On State light blocked
*TN LCD h tt*TN = Twisted Nematic
*TN LCD shutter
February 3D TV Training7
3D Active Glasses Type3D Active Glasses Type
Shutter glasses type 3D: Separating left and right images by synchronizing the TV and the glassesSeparating left and right images by synchronizing the TV and the glasses.
Fundamentals of Shutter glasses
Between Frames
Frame 1
Frame 2
The image is Displayed using two different viewing angles every other frame
The 3D Glasses are then synchronized with the two different
images to give the 3D effect.They are blanked between scene
February 3D TV Training8
angles every other frame. ychanges.
TT--CON with 3D FormatterCON with 3D Formatter3D Formatter
- All Formats of input are available and converted by 3D technology- Full HD input available - 3D Enhancement
1) Sid b Sid1) Line by LineHDMI 1.3
1) Side by Side
2) Top and Bottom
R
L 2) Frame by Frame
3) Checkerboard
3D Formatter
R Anaglyph (Passive)4) Frame Sequential
(Full Resolution available) L
I t l d (P i )
g y ( )
Interlaced (Passive)R
L
5) Over/Under
HDMI 1.4Vert or Horz
February 3D TV Training9
3D Video viewing range and Compatible 3D Formats 3D Video viewing range and Compatible 3D Formats
VIEWING CONDITIONS Maximum Optimump
ViewingDistance
7 m(22.9 ft)
3 m - 7 m(9.8 ft - 22.9 ft)
ViewingAngle 140º (When the viewing distance is 3 m (22.9 ft)Angle
Signal Resolution HorizontalFrequency kHz
VerticalFrequency Hz Playable 3D video format
Accepted 3D Formats
Frequency kHz Frequency Hz
720P 1280X720 45
60
Top & Bottom, Side by SideHDMI (V1.4 with HDMI 3D
Frame Packing1080i 33.75 Top & Bottom, Side by Side
HDMIInput
1920X10801080p
67.5Top & Bottom, Side by Side
Checker BoardSingle Frame Sequential
27 24
Top & Bottom, Side by SideChecker Board27 24 HDMI (V1.4 with HDMI 3DFrame Packing
33.75 30 Top & Bottom, Side by SideChecker Board
USB Top & Bottom Side by Side
February 3D TV Training10
USBInput 1080p 1920X1080 33.75 30 Top & Bottom, Side by Side
Checker Board
TROUBLESHOOING 3D SECTIONTROUBLESHOOING 3D SECTION
This section will give you troubleshooting guidelines for LG 3D Televisions.
February 3D TV Training11
3D Troubleshooting Flow Chart Page 1 of 43D Troubleshooting Flow Chart Page 1 of 4
38 December 2011 3D Troubleshooting LCD-DV
Original: p/n: EBR69838801Sub: p/n: EBR72073501
Use Sub p/n for interference on certain remotes.
OK
Check 3D_SYNC LineMain P7800 pin 49T-CON/3D P802 pin 2
Check 3D Emitter Board Connector 1pin : 5V NG
Replace 3D Emitter Assy.
Cable Open
Red Power LED should stay on solid for about 3 sec. then go off. When power button is pressed for Power Off, the LED will blink 3 times.Note 1: The Red LED will blink constantly for 1 minute if battery is discharged.Note 2: Glasses can operate using the USB connector plugged in if batteries are not charged.
Make sure the 3D Glassesare charged
Change the 3D Glasses
No 3D Sync
OK Possible *FPGA (Main) or *FRC (T-CON/3D) has problems.Replace It or T-CON/3D Board.
For details about making the 3D Sync line check, see next page.
Check 3D Emitter Voltage of Main Board
P2401 pin 1 : 5V NG
Disconnect Connector P2401, recheck 5V pin 1.If OK, check 3D emitter board connector pin 1 diode check, should read Open. 5V_Emitter developed by IC2401 pins 6-7
OK
NG
NG*FPGA: Field Programmable Gate Array*FRC: Frame Rate Converter
No 3D
Use a Digital Camera or Cell Phone Camera to look at the transmitter to see if the two LEDs are illuminated.
If you are having trouble seeing 3D, Try changing the 3D selection types if it is difficult to determine what format the 3D movie is in. Example: Top/Bottom, Side by Side, Checker Board, Frame Sequential.Make sure you are using at least version 1.3 HDMI cable. (1.4 HDMI will auto select).
Play a 3D Movie
A simple test is to hold the glasses about 1 ft. in front of you towards a white sheet of paper. The glasses should still able to see the 3D Emitter signal from the TV while playing a 3D movie. If the glasses sync up the paper will appear as looking through normal sun glasses, if not synced, the paper will appear amber in color.
Don’t forget to try swapping the L/R selection by pressing the “3D Setting button” on the remote control. (Blue Button in the Special Function Buttons)
LEDsOn
Charged
NoChange
Original: p/n: EBR69838701Sub: p/n: EBR72073601
LX6500 Series
LX9500 Series
3D Troubleshooting Flow Chart Page 2 of 43D Troubleshooting Flow Chart Page 2 of 4
39 December 2011 3D Troubleshooting LCD-DV
Continued from previous page
Q906 (Collector)5.5V p/p 60 Hz
Q907 (Collector)3.9V p/p 60 Hz
“3D-Emitter" to P2401 "Main"
Pin LABEL SBY Run Diode Check
1 +5V_EMITTER 0V 5.1V Open
2 Gnd Gnd Gnd Gnd
3 3D_SYNC 0V 1.6V Open
15) 5.1V6) 0V7) 0V8) Gnd
4) 5.1V3) 1.6V2) 2.15V1) 5.1V
Possible Main or T-CON/3D has problems.
Replace T-CON/3D orMain Board
Should be
OKReplace T-CON
(Formatter B/D)
B) 0.61VE) GndC) 0.03V
Q906
B) 0VE) GndC) 1.9V
Q907
B) 0VE) GndC) 3.5V
Q102IC100
5.3V p/p 12 MHz
5.5V p/p 60 Hz
Check 3D_SYNC Line Main P7800 pin 50 T-CON/3D P802 pin 2
Should be
5.5V p/p 60 Hz
1.6VDC
Check Q906, Q907 of T-CON/3D Board
NG
NG
Additional Information On the 3D Emitter Board
LED LEDOriginal: p/n: EBR69838801
Sub: p/n: EBR72073501Use Sub p/n for interference
on certain remotes.Original: p/n: EBR69838701
Sub: p/n: EBR72073601LX6500 Series LX9500 Series
To TFT Panel
3D IR
Check 3D_SYNC Line Main P802 pin 2
Check 3D_SYNC LinePin 3
Main Board
P7800 Pin 50
P2401Pin 3
A1
A2 C
P805
IC1000
EB
C E B
C
EB
CEB
C
P806
IC102
P101X100
25MHz
IC600
2.52V
2.53V
3.4V
13
25
48
P802P804P803
IC502
IC307IC200
IC205IC302L306
IC301L305
IC304
IC1002 IC1001
IC500 IC400
SW400
IC801
L314
IC308
Q700
L700
IC201
IC204
IC700
Q702L702
IC305
L309
IC306
L601
EB
C
EB
C
P900
L307
L600IC309
IC501
Q1004Q1003
Q1002Q1001
L701 Q701
Q906Q907
D602
D600
D601
L802
11.42VLVDS 12V
TP
n/c
A1A2C
D603
IC310
B) 0.61VE) GndC) 0.03V
Q906
B) 0VE) GndC) 1.9V
Q907
T-CON3D Board
5.5V p/p 60 Hz
1.6VDC
5.5V p/p 60 Hz
1.6VDC
LX6500 3D Sync Troubleshooting Flow Chart Page 3 of 4LX6500 3D Sync Troubleshooting Flow Chart Page 3 of 4
40 December 2011 3D Troubleshooting LCD-DV
Continued from previous page
To TFT Panel
To TFT Panel
3D IR
Check 3D_SYNC Line Main P7800 pin 50
Check 3D_SYNC LinePin 3
Main Board
P7800 Pin 50
P2401Pin 3
B) 0.61VE) GndC) 0.03V
Q906
B) 0VE) GndC) 1.9V
Q907
T-CON3D Board
5.5V p/p 60 Hz
1.6VDC
5.5V p/p 60 Hz
1.6VDC
LX9500 3D Sync Troubleshooting Flow Chart Page 4 of 4LX9500 3D Sync Troubleshooting Flow Chart Page 4 of 4
41 December 2011 3D Troubleshooting LCD-DV
Continued from previous page
To TFT Panel
Q803
E
C
B
IC400
P805
ECB
Q702
Q804Q907Q906
IC1000
IC500
E
BC E B
C
EB
C
E
BC
EB
C
EB
C
Q701 L701
SW400IC306
IC1001IC1002
IC801P806
IC309
IC102
L309
IC305IC701
L702
IC700P804
Q700IC310L314
IC203IC308 L700
P101
IC204
IC201
X100
25MHz
P802P803IC200
IC205
Q1002Q1001
Q1004Q1003
P901
n/cL601
IC600
L600
IC302L307
IC304L305
IC301IC307
L306
IC202
A2
A1 C
D60020.68V
1.2V
1.27V
8.2V
2.52V
2.53V
3.3V 3.33V
1.85V
1.88V
3.4V
1.07V
1.05V
11.4V11.36V
3.34V3.35V
8V Pin 1125.6V Pin 8
8V Pin 61
8.2V Pins 73-74
3.4V Pins 76-77
16V Pins 79-80
-5V Pins 71
25.6V Pins 666V Pins 63-64
8.2V Pins 7-8
3.4V Pins 4-5 8V Pin 21
6V Pins 18-1925.6V Pins 16
-5V Pins 11
16V Pins 1-2
8.2V
3.4V
L802L801
12VLVDS
TP
25.6V16V
6V Pin 2
16V Pin 42
3.4V 23-2413
25
48
Check 3D_SYNC Line Main P802 pin 2
Eye Tiredness InformationEye Tiredness Information
Why your eyes get tired while you’re seeing 3D images :• The color clarity and resolution of 3D images are lower than those of 2D.• 3D images deliver strong effects. Viewing “popping out” images, which is distorted, for a long time
makes you more tired. • Accommodation and convergence (Your both eyes focus a single point)• 3D presentation with glasses displays unnatural images due to no time difference during eye
3DC safety guidelines for distribution of 3D displays suitable for human eyes were made at the 3D Consortium 2006
3D presentation with glasses displays unnatural images due to no time difference during eye movements.
at the 3D Consortium 2006
• It is recommended to see 3D images within a distance of 2m. • The brain is not able to adjust the focus when you are more
than 2m away from the TV.• Customers don’t have the condition for seeing a display
within 2m, below warning sentence should be noticeable.
If it is impossible for customer to view 3D image displayed on the screen 2m away from the display,displayed on the screen 2m away from the display, keep in mind that the convergence angle should not exceed 2 degrees.
• For example, when you see the display 1m away from the TV, th di t f 3D i i t h ld b ithi
The brain gets confused because of the distance difference between the
actual image and the popping up image
February 3D TV Training16
the distance of any 3D image popping out should be within 38cm.
image.
TELEVSION 3D LAYOUT SECTIONTELEVSION 3D LAYOUT SECTION
This section will give you information about how 3D was added to LG Televisions.
February 3D TV Training17
55LX6500 Circuit 55LX6500 Circuit Board LayoutBoard Layout
Panel Backlight ConnectionsThese clips will
Warning: The Frame may have sharp edges
Panel Backlight ConnectionsThese clips will fall. Put screw to
secure.
Clip
Inverter
Main BoardPower Supply
(SMPS)LVDS Cable
Clip Clip
Soft Touch
T-CON/3DClip
Clip
InvisibleIR/LED
Key Board
InvisibleLG LOGO 3D Emitter
Panel Connection Points
February 3D TV Training18
InvisibleSpeaker Right
IR/LED Board
InvisibleSpeaker Left
LG LOGO Board
3D EmitterBoard
47LX9500 Circuit 47LX9500 Circuit Board LayoutBoard Layout
Extension BoardA (Main) Extension Board
Extension Board(Secondary)
Warning: The Frame has many sharp edges
Inverter Main Inverter Secondary
B (Main)
Power Supply
Main Board
(SMPS)
LVDS Cable
Woofer
Keyboard
T-CON/3D
InvisibleIR/LED InvisibleLG Logo 3D Emitter
Panel Connection Points To Logo
February 3D TV Training19
InvisibleSpeaker Right
IR/LED Board
InvisibleSpeaker Left
LG Logo Board
3D EmitterBoard
POWERSUPPLY
Speaker (Front Left)
AC In
55LX6500 Connector Identification Diagram55LX6500 Connector Identification DiagramTFT PANEL
20 February 3D TV Training
Speaker (Front Right)IR/Intelligent Sensor board
INVERTER
p/n: EBR6948890155LX6500-UB_AUSWLJR
p/n: EBU6098780255LX6500-UB_AUSWLUR
p/n: EAJ61111801
p/n: EAB60961501 p/n: EAB60961501
p/n EBR64966201
p/n: EAY60908802
SK101
P204 P205 P201
CN103 CN102
CN2
P8000
P8800
To TFT Panel
V1~V16 If the Panel is replaced, reset the UTTTime. Service Menu,
System 1 Item 12
T-CON
P802
P806 P805
P7802P7901
P7800
P8200
P8100n/c
n/cP1000
3D Emitter board
Soft Touch Keys
J3 J2 J1
P803
MAINBOARD
P2401
P101n/c
n/c
P900
Panel Backlight Connections
CN101
P804
P7803
Comes with Panel
Comes with Panel
Center LOGO Original: p/n: EBR69838801
Sub: p/n: EBR72073501Use Sub p/n for interference
on certain remotes.
POWERSUPPLY
AC In
IR LOGO
47LX6500 Connector Identification Diagram47LX6500 Connector Identification DiagramTFT PANEL
21 February 3D TV Training
Speaker (Front Right)Soft Touch Keys
p/n: EAJ61111701
p/n: EAB60961501 p/n: EAV60793302
p/n: EAY60803402
SK101
P204
J1J2
J3
If the Panel is replaced, reset the UTTTime. Service Menu, System 1 Item 12
P205
P201
To LEDs
White Plug
Black Plug
p/n: EBR69490101AUSWLJR
p/n: EBU60987702AUSWLUR
P8000
P8800
To TFT Panel
T-CON
P802
P806 P805
P7803
P7800
P8200
P8100n/c
n/cP1000
P803
MAIN BOARD
P2401
P101n/c
n/c
P900
P804
Comes with Panel
P7802
3D Emitter boardOriginal: p/n: EBR69838801
Sub: p/n: EBR72073501p/n: EAB60961501
Speaker (Front Right)
p/n: EAD61078208
p/n: EAD60956344
p/n: EBR64966201AUSWLJR
p/n: EBU64966207AUSWLUR
p/n: EBR64966801Use Sub p/n for interference
on certain remotes.
POWERSUPPLY
Speaker (Front Left)
AC In
Logo
47LX9500 Connector Identification Diagram47LX9500 Connector Identification Diagram
n/c
TFT PANEL
22 February 3D TV Training
Speaker (Front Right)IR/Intelligent Sensor board
INVERTER(Main) INVERTER
(Secondary)
p/n: EBR69489001
p/n: AFB73089901
p/n: EAB61353002 p/n: EAB61353002p/n EBT61093402
p/n: EAY60803402
CN3
CN4
CN5
CN6
CN7
CN8
CN9
CN10
CN11
CN14
CN15
CN16
CN17
CN18
CN19
CN20
CN22
CN25
CN26
CN27
CN28
CN29
CN30
CN31
CN32
CN33
n/c
CN1
SK101
CN2
P204 P205 P201
CN1 CN3 CN2
CN11
CN4
CN5
CN12
CN104
CN105
CN23
CN24P7900P7802
P8000
P8800
To TFT Panel
CN13
LED
Extension B
oard
LED
Extension B
oard
LED
Extension B
oard
CN103
CN101
V25~V32
V33~V40
V41~V48
V49~V56
V57~V64
V65~V72
V73~V80
V81~V88
V89~V96
V73~V80
V81~V88
V1~V8
V9~V16
V17~V24
V25~V32
V33~V40
V41~V48
V49~V56
V105~V112
V113~V120
V121~V128
V29~V136
V137~V144
V145~V152
V153~V160
V161~V168
If the Panel is replaced, reset the UTTTime. Service Menu, System 1 Item 12
T-CON
P802
P806 P805
V169~V176
P7803
P7901P7800
P2100
P2101
P8200
P2000
P8100 n/c
P2200
n/cP1000Woofer
3D Emitter board
Control Keys
J4 J2 J1
P100
P803
P804
MAINBOARD
Comes with Cabinet Assy.Item 300 p/n ABJ73128201
J1
P2401
CN21
P101 n/c
n/cP901
Original: p/n: EBR69838701Sub: p/n: EBR72073601
Use Sub p/n for interference on certain remotes.
LX6500 Series TLX6500 Series T--CON/3D CON/3D Board Board Components Components IdentifiedIdentified
FRCTruMotion
DDRs DDRs
FPGAFPGA
EEPROM EEPROM
TFT TFTController ControllerDC to DC
February 3D TV Training23
LX9500 Series LX9500 Series TT--CON/3D Board CON/3D Board Components Components IdentifiedIdentified
DDRs DDRs
FRCTruMotion
FPGA
TFT TFTEEPROM EEPROM
DC to DC
TFTController
TFTController
EEPROM EEPROM
February 3D TV Training24
Pin Label Run Diode Check Pin Label Run Diode
Check
TT--CON/3D Board LVDS P802 to Main Board P7800 Voltage and Diode CheckCON/3D Board LVDS P802 to Main Board P7800 Voltage and Diode CheckP802 LVDS Connector "T-CON/3D Board“ to P7800 "Main"
1 Gnd Gnd Gnd 24 RRXA4- 1.26V 1.67V
2 3D_Sync_Out 0.03V 2.34V 25 RRXA4+ 1.08V 1.67V
3 *V_SYNC 3.33V 1V 26 Gnd Gnd Gnd
4 SDA3_3.3V 3.34V 1.73V 27 n/c n/c n/c
P802
5 SCL3_3.3V 3.34V 1.73V 28 RRXB0- 1.19V 1.67V
6 FRC_RESET 3.32V Open 29 RRXB0+ 1.19V 1.67V
7 n/c n/c n/c 30 RRXB1- 1.19V 1.67V
8 3DTV 0V Open 31 RRXB1+ 1.16V 1.67V T-CON/3D 19 3D_DIM 0V Open 32 RRXB2- 1.2V 1.67V
10 3D_DIM_2 0.05V Open 33 RRXB2+ 1.14V 1.67V
11 n/c n/c n/c 34 Gnd Gnd Gnd
12 RRXA0- 1.17V 1.67V 35 RRXBCK- 1.16V 1.67V
13 RRXA0+ 1 19V 1 67V 36 RRXBCK+ 1 2V 1 67V
Text in Blue are LVDS video signals.
12V
13 RRXA0+ 1.19V 1.67V 36 RRXBCK+ 1.2V 1.67V
14 RRXA1- 1.19V 1.67V 37 Gnd Gnd Gnd
15 RRXA1+ 1.17V 1.67V 38 RRXB3- 1.22V 1.67V
16 RRXA2- 1.22V 1.67V 39 RRXB3+ 1.14V 1.67V
17 RRXA2+ 1.14V 1.67V 40 RRXB4- 1.26V 1.67V
*Pin 25.5V p/p 60 Hz
3D-Sync
18 Gnd Gnd Gnd 41 RRXB4+ 1.09V 1.67V
19 RRXACK- 1.16V 1.67V 42-46 Gnd Gnd Gnd
20 RRXACK+ 1.20V 1.67V 47 n/c n/c n/c
21 Gnd Gnd Gnd 48-51 PANEL_VCC 11.58V Open T-CON/3D B+
*Pin 2 Only active when a 3D source is played. (1.63V)
February 3D TV Training25
22 RRXA3- 1.20V 1.67V
23 RRXA3+ 1.14V 1.67VDiode Check taken with meter in Diode Mode with all Connectors Removed
55LX6500 55LX6500 Main Main Board Board L tL t
To T-CON/3DP7800
To 3D Emitter
To T-CON/3DP7803P7802
LayoutLayout
Video Processor IC900 and
Di i IC9701
P7901To Inverter
P8000To SMPS
P2401IC9701
P2300Dimming IC9701
runs Hot. This is normal.P8200 To Front IR
P1000n/c
n/c
Component or
P8100n/c
n/cIC900Video
Processor
Component or Composite
These connectors are Mini plug typeLAN
Wi l M di B HeadphoneWireless Media Box Remote
Headphone
February 3D TV Training26
P8800 To Speakers
To T-CON/3D
P7800See next page for component
P2401To 3D Emitter
To T-CON/3D
P7802
Video Processor IC900 and
Dimming IC9701
P8000To SMPS
component identification P7803
To T-CON/3DIC9701 Micro
Dimming IC9701 runs Hot.
This is normal.P8200 To Front IR
P1000n/c
IC8101 Micro
IC900 Video Processor
47LX6500 Main 47LX6500 Main Board LayoutBoard Layout
P8100n/c
n/cProcessor
Component or Composite
These connectors are Mini plug type
LAN
Wireless Media BoxWireless Media Box Remote
February 3D TV Training27
P8800 To Speaker
To T-CON/3D
P7800P7900
To Inverter (Main)
To 3D Emitter
To T-CON/3D
To T-CON/3D P2401P7803
P7802
Micro and Video Processor IC900
and
P7901To Inverter
(Secondary)
P8000To SMPS
P2100 to Woofer
P2101 to Right Speaker
To T CON/3D
and Dimming IC9701
runs Hot. This is normal.
P8200 To Front IR
P1000n/c
47LX950047LX9500 MainMain
P8100n/cP2000 to Motion Remote
IC900Video
Processor
47LX9500 47LX9500 Main Main Board LayoutBoard Layout Component or
CompositeThese connectors are Mini plug type
LAN
Wireless Media BoxWireless Media Box Remote
February 3D TV Training28
P2200 to Logo boardP8800 To Left Speaker
Main Board Connector P7800 to TMain Board Connector P7800 to T--CON/3D P802 Voltage and Diode CheckCON/3D P802 Voltage and Diode CheckThere are no Stand-By Voltages for the ConnectorDiode Mode values taken with all Connectors RemovedP7800 Connector “Main" to “T-CON/3D“ P802
Pin Label Run Diode Check Pin Label Run Diode Check Pin Label Run Diode Check
1 PANEL_VCC 11.59V Open 18 Gnd Gnd Gnd 35 RRXA2+ 1.14V 0.97V
2 PANEL_VCC 11.59V Open 19 RRXB2+ 1.14V 0.97V 36 RRXA2- 1.22V 1.15V
3 PANEL_VCC 11.59V Open 20 RRXB2- 1.2V 1.15V 37 RRXA1+ 1.17V 0.97V
4 PANEL_VCC 11.59V Open 21 RRXB1+ 1.16V 0.97V 38 RRXA1- 1.19V 1.15V
5 n/c n/c n/c 22 RRXB1- 1.19V 1.15V 39 RRXA0+ 1.19V 0.97V
6 Gnd Gnd Gnd 23 RRXB0+ 1.19V 0.97V 40 RRXA0- 1.17V 1.15V
7 Gnd Gnd Gnd 24 RRXB0- 1.19V 1.15V 41 n/c n/c n/c
8 Gnd Gnd Gnd 25 n/c n/c n/c 42 3D_DIM_2 0.05V 1.03V
9 Gnd Gnd Gnd 26 Gnd Gnd Gnd 43 3D_DIM 0V 1.03V
10 Gnd Gnd Gnd 27 RRXA4+ 1.08V 0.97V 44 3DTV 0V Open
11 RRXB4+ 1 09V 0 97V 28 RRXA4- 1 26V 1 15V 45 n/c n/c n/c11 RRXB4+ 1.09V 0.97V 28 RRXA4 1.26V 1.15V 45 n/c n/c n/c
12 RRXB4- 1.26V 1.15V 29 RRXA3+ 1.14V 0.97V 46 FRC_RESET 3.32V Open
13 RRXB3+ 1.14V 0.97V 30 RRXA3- 1.2V 1.15V 47 SCL3_3.3V 3.34V 1.04V
14 RRXB3- 1.22V 1.15V 31 Gnd Gnd Gnd 48 SDA3_3.3V 3.34V 1.04V
15 G d G d G d 32 RRXACK 1 2V 0 97V 49 V SYNC 3 33V 0 998V15 Gnd Gnd Gnd 32 RRXACK+ 1.2V 0.97V 49 V_SYNC 3.33V 0.998V
16 RRXBCK+ 1.2V 0.97V 33 RRXACK- 1.16V 1.15V 50 *3D_Sync_Out 0.03V Open
17 RRXBCK- 1.16V 1.15V 34 Gnd Gnd Gnd 51 Gnd Gnd Gnd
5 5V / 60 H*Pi 50 O l ti h 3D
February 3D TV Training29
5.5V p/p 60 Hz3D-Sync
*Pin 50 Only active when a 3D source is played. (1.63V)
INDEX SECTION HDMI 1.4 INFORMATIONINDEX SECTION HDMI 1.4 INFORMATION
This section will give you some technical specification for HDMI 1.4.
February 3D TV Training30
1. HDMI 1.4 new FunctionN t k (Eth t) (TV d t S t)
Index 1: HDMI 1.4 InformationIndex 1: HDMI 1.4 Information
● Network (Ethernet) (TV does not Support)● 3D video format Support (LG TV Supported TV Auto Detects Format)● Audio Return Channel (TV does not Support)● 4K x 2K Video Resolution (Supported)
Value Meaning0000 Frame Packing (Mandatory)0001 Field Alternative
2. HDMI 1.4 3D video format
2010 3DTVs models support HDMI 1.4 3D formats. 0001 Field Alternative0010 Line Alternative0011 Side-by-Side (Full)0100 L + depth0101 L + depth + graphics + graphics-depth
0110~0111 Reserved for future use
3D Optional Formats
Code 3D Structure Description Vertical active Pixel Freq (MHz) Solution
0110 0111 Reserved for future use1000 Side-by-Side (Half) (See Table H-3)
1001~1111 Reserved for future use
3. Frame Packing (3D Video Format) Code 3D Structure Description Vertical active Pixel Freq (MHz) Solution
0 Frame Packing
1920x1080p, 23.98/24Hz 2205 148.35 / 148.5 SoC L/R separation
(24Hz 48Hz) 1280x720p, 59.94/60Hz 1470 148.35 / 148.5 SoC L/R separation and
1080P/60P Scaling
1280x720p, 50Hz 1470 148.5 SoC L/R separation and 1080P/50P S li
See Index 3
See Index 2
February 3D TV Training31
1280x720p, 50Hz 1470 148.5 1080P/50P ScalingSoC (System on a Chip)
Index 2: HDMI 1.4 3D Frame Packing StructureIndex 2: HDMI 1.4 3D Frame Packing Structure1280 x 720p, 60Hz
2D Video 3D Video
Hblank Hactive
Vblank
Active video
Hblank Hactive
Vblank
VactiveVfreq(60Hz) 720
Active space
A ti id
L
Vactive
Vact_space(30)
Vact_video(720)
1470Vfreq(60Hz)
1280
Active video
R
Vactive
Vact_space(720)
12801280 1280
Vblank(30) = Vact_space(30)
Pixel Clock : 74.25 MHz Pixel Clock : 148.5 MHz
February 3D TV Training32
Back to Index 1
Index 3: HDMI 1.4 3D Frame Packing StructureIndex 3: HDMI 1.4 3D Frame Packing Structure1920 x 1080p, 24Hz
2D Video 3D Video
Hblank Hactive
Vblank
Active video
Hblank Hactive
Vblank
VactiveVfreq(24Hz) 1080
Active space
A ti id
L
Vactive
Vact_space(45)
Vact_video(1080)
2205Vfreq(24Hz)
1920
Active video
R
Vactive
Vact_space(1080)
19201920 1920
Vblank(30) = Vact_space(30)
Pixel Clock : 74.25 MHz Pixel Clock : 148.5 MHz
February 3D TV Training33
Back to Index 1
3D Training3D Training3D Training 3D Training Conclusion PageConclusion Page
Thi l d thThis concludes the 3D training
sessionsession.