LCD TV OWNER’S MANUAL 32LC5DC 32LC5DCS 32LC5DCB 37LC5DC 37LC5DCB 37LC5DC1 42LC5DC 32LX5DC 32LX5DCS 42LB5DC 32LC50C 32LC50CS 32LC50CB 32LX50C 32LX50CS 37LC50C 37LC50CB 42LB50C 42LC50C 32LG500H 37LG500H 42LG500H www.lgcommercial.com PLASMA TV MODEL 42PX8DC 42PG65C 42PG60C PLASMA TV LCD TV MODELS Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you requireservice.
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radio fre-quency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However,there is no guarantee that interference will notoccur in a particular installation. If this equipmentdoes cause harmful interference to radio or televi-sion reception, which can be determined by turningthe equipment off and on, the user is encouraged totry to correct the interference by one or more ofthe following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipmentand receiver.
- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is con-nected.
- Consult the dealer or an experienced radio/TVtechnician for help.
Any changes or modifications not expresslyapproved by the party responsible for compliancecould void the user’s authority to operate theequipment.
CAUTION
Do not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product
The lightning flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to the
presence of uninsulated “dangerous voltage”within the product’s enclosure that may be ofsufficient magnitude to constitute a risk of electricshock to persons.
The exclamation point within an equilateraltriangle is intended to alert the user to
the presence of important operating and main-tenance (servicing) instructions in the literatureaccompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding sys-tem of the building, as close to the point of the cableentry as practical.
WARNING / CAUTION
A
1
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.
Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.
Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.
Only use attachments/accessories specified bythe manufacturer.
Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over.
Unplug this apparatus during lighting storms orwhen unused for long periods of time.
Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus hasbeen exposed to rain or moisture, does not operatenormally, or has been dropped.
1
2
3
4
5
7
8
6
9
10
SAFETY INSTRUCTION
2
SAFETY INSTRUCTION
Never touch this apparatus or antenna during athunder or lighting storm.
When mounting a TV on the wall, make sure not toinstall the TV by the hanging power and signalcables on the back of the TV.
Do not allow an impact shock or any objects to fallinto the product, and do not drop onto the screenwith something.
CAUTION concerning the Power Cord :It is recommend that appliances be placed upon adedicated circuit; that is, a single outlet circuit whichpowers only that appliance and has no additionaloutlets or branch circuits. Check the specificationpage of this owner's manual to be certain.Do not connect too many appliances to the sameAC power outlet as this could result in fire or elec-tric shock.Do not overload wall outlets. Overloaded wall out-lets, loose or damaged wall outlets, extension cords,frayed power cords, or damaged or cracked wireinsulation are dangerous. Any of these conditionscould result in electric shock or fire. Periodicallyexamine the cord of your appliance, and if itsappearance indicates damage or deterioration,unplug it, discontinue use of the appliance, andhave the cord replaced with an exact replacementpart by an authorized servicer. Protect the powercord from physical or mechanical abuse, such asbeing twisted, kinked, pinched, closed in a door, orwalked upon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance. Do not make the TV with the power cord pluggedin. Do not use a damaged or loose power cord. Besure do grasp the plug when unplugging the powercord. Do not pull on the power cord to unplug theTV.
WARNING - To reduce the risk of fire or electricalshock, do not expose this product to rain, moistureor other liquids. Do not touch the TV with wethands. Do not install this product near flammableobjects such as gasoline or candles or expose theTV to direct air conditioning.
Do not expose to dripping or splashing and do notplace objects filled with liquids, such as vases, cups,etc. on or over the apparatus (e.g. on shelves abovethe unit).
GGRROOUUNNDDIINNGG
Ensure that you connect the earth ground wire toprevent possible electric shock. (i.e. a TV with athree-prong grounded AC plug must be connectedto a three-prong grouned AC outlet) If groundingmethods are not possible, have a qualified electri-cian install a separate circuit breaker.
Do not try to ground the unit by connecting it totelephone wires, lightening rods, or gas pipes.
Mains plug is the disconnecting device. The plugmust remain readily operable.
Keep the product away from direct sunlight.
12
11
14
13
16
17
18
19
Power Supply
Short-circuitBreaker
15
3
AANNTTEENNNNAASS
OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg
If an outdoor antenna is installed, follow the precau-tions below. An outdoor antenna system should notbe located in the vicinity of overhead power lines orother electric light or power circuits, or where it cancome in contact with such power lines or circuits asdeath or serious injury can occur.
Be sure the antenna system is grounded so as to pro-vide some protection against voltage surges andbuilt-up static charges.
Section 810 of the National Electrical Code (NEC) inthe U.S.A. provides information with respect to prop-er grounding of the mast and supporting structure,grounding of the lead-in wire to an antenna dis-charge unit, size of grounding conductors, location ofantenna discharge unit, connection to groundingelectrodes and requirements for the grounding elec-trode.
When cleaning, unplug the power cord and scrubgently with a soft cloth to prevent scratching. Do notspray water or other liquids directly on the TV aselectric shock may occur. Do not clean with chemi-cals such as alcohol, thinners or benzene.
Moving
Make sure the product is turned off, unpluggedand all cables have been removed. It may take 2 ormore people to carry larger TVs. Do not pressagainst or put stress on the front panel of the TV.
Ventilation
Install your TV where there is proper ventilation. Donot install in a confined space such as a bookcase.Do not cover the product with cloth or other mate-rials (e.g.) plastic while plugged in. Do not install inexcessively dusty places.
If you smell smoke or other odors coming from theTV or hear strange sounds, unplug the power cordcontact an authorized service center.
Do not press strongly upon the panel with a hand orsharp object such as nail, pencil or pen, or make ascratch on it.
22
20
Antenna Lead in Wire
Antenna Discharge Unit(NEC Section 810-20)Grounding Conductors(NEC Section 810-21)Ground ClampsPower Service GroundingElectrode System (NECArt 250, Part H)
Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
Owner’s Manual, Setup & Operation Guide
for Commercial Mode
Power Cord
FEATURES OF THIS TV
FOR LCD TVIf the TV feels cold to the touch, there may be asmall “flicker” when it is turned on. This is normal,there is nothing wrong with TV.
Some minute dot defects may be visible on thescreen, appearing as tiny red, green, or blue spots.However, they have no adverse effect on the moni-tor's performance.
Avoid touching the LCD screen or holding your fin-ger(s) against it for long periods of time. Doing somay produce some temporary distortion effects onthe screen.
OOnn DDiissppoossaall
a. The fluorescent lamp used in this product con-tains a small amount of mercury.
b. Do not dispose of this product with generalhousehold waste.
c. Disposal of this product must be carried out inaccordance to the regulations of your localauthority.
Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models
x 2
M4xL22
Torx plus Star head screw
(Refer to p.7, 15)
Only 42PG65C model
Cable Management ClipBolts for stand
assembly(Refer to P.14)
x 4
Protective Bracket and Bolt forPower Cord
(This feature is not available for all models.)
(Refer to P.12-13, 15)
Cable Holder
(Except 42PX8DC)
Only 32/37/42LG500H models
Bolts for stand assembly(Refer to P.15)
Protection CoverScrew for stand fixing(Refer to P.19)
x 4 x 4or
PR
EPA
RA
TIO
N
PREPARATION
Cable Holder Plug in type
holder
PR
EPA
RA
TIO
N
7
FRONT PANEL CONTROLS
Here shown may be somewhat different from your TV.
CH
VOL
ENTER
MENU
INPUT
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.Illuminates green when the TV is switched on.
CHANNEL Buttons
VOLUME Buttons
ENTER Button
MENU Button
INPUT Button
POWER Button
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C
Tighten the two of these four screws andthe two Torx plus star head screws (provid-ed as parts of the TV) to secure the TV.Tighten the two Torx plus star head screwswith a star head driver bit (not providedas parts of the TV).
x 2 x 2
x 4
Tighten the stand with thefour screws (provided as partsof the TV).
Connect digital audio from various types of equip-ment. Note: In standby mode, these ports do not work.
M.P.I
RESET/UPDATE/REMOTE CONTROL OUT
SERVICE ONLY
RGB IN (PC)
Connect the output from a PC.AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.
SPEAKER OUT 8Ω
AV (Audio/Video) IN
Connect audio/video output from an externaldevice to these jacks.S-VIDEO
Connect S-Video out from an S-VIDEO device.
COMPONENT IN
Connect a component video/audio device to thesejacks.
RJP INTERFACE
Power Cord Socket
For operation with AC power. Caution: Never attempt to operate the TV on DCpower.
ANTENNA IN
Connect over-the air signals to this jack.
1 8
9
10
11
12
2
3
4
5
6
7
13
VIDEO AUDIO VIDEO
AUDIO
MONO( )S-VI
DEO
REMOTECONTROL
OUT
RESET UPDATE
1
HDMI IN
SPEAKEROUT8
AV
IN 1
COMPONENT IN2L R
L R
AUDIO(RGB / DVI)
RGB IN
RGB(PC)
RJPINTERFACE
OPTICAL
DIGITALAUDIO OUT
SERVICE ONLY
DVI IN
1
6
9 8
4
7102
42PG60C, 42PG65C
5
32/37/42LG500H
REMOTECONTROL
OUT
AV IN
1
AUDIO VIDEOL/MONO
UPDATERESET
RG
B IN RGB(PC) AUDIO
(RGB/DVI)
COMPONENT INVIDEO AUDIO
HDMI/DVI IN
2
1(DVI)
RJPINTERFACE
SPEAKER OUT8
S-VIDEO
RS-232C IN(SERVICE ONLY)
OPTICALDIGITAL
AUDIO OUT
1
6
10
74
859
2
4
PR
EPA
RA
TIO
N
12
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
Install the CABLE MANAGEMENT as shown.
How to remove the CABLE MANAGEMENT
GG Hold the CABLE MANAGEMENT with both hands andpull it backward.
CABLE MANAGEMENT
GG Do not hold the CABLE MANAGEMENT when movingthe product.
- If the product is dropped, you may be injured or theproduct may be damaged.
NOTE
1
2
Install the CABLE HOLDER as shown.
CABLE HOLDER
2
BOLT
Here shown may be somewhat different from your TV.
PROTECTIVE BRACKET
(This feature is not available for all models.)
PR
EPA
RA
TIO
N
13
(This feature is not available for all models.)
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
2
Install the CABLE HOLDER as shown.
CABLE HOLDER
3
BOLT
To separate the CABLE HOLDER, loosen the boltinstalled the set.
1
PROTECTIVE BRACKET
PR
EPA
RA
TIO
N
14
PREPARATION
42PX8DC
Hold the CABLE MANAGEMENT with both hands and pull it as shown.
Connect the cables as necessary.
To connect an additional equipment, see theEXTERNAL EQUIPMENT SETUP section.
1
2
Install the CABLE MANAGEMENT as shown.3
45°
Connect the cables as necessary.
To connect additional equipment, see theEXTERNAL EQUIPMENT SETUP section.
1
Install the CABLE MANAGEMENT CLIP asshown. (Except 42PG60C model)
If your TV has CABLE HOLDER, fix it as shownand bundle the cables.
2
CABLE MANAGEMENT CLIP
CABLE HOLDER
GG Do not hold the CABLE MANAGEMENT CLIPwhen moving the TV.- If the TV is dropped, you may be injured or
the product may be broken.
NOTE!
How to remove the CABLE MANAGEMENT CLIP(Except 42PG60C model)
GG First, press the cable management. Hold theCCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP with bothhands and pull it upward.
42PG60C, 42PG65C
BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV.
PR
EPA
RA
TIO
N
15
1
2
3
After removing the stand, install the included pprrootteeccttiioonnccoovveerr over the hole for the stand.
Press the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TV until youhear it click.
PROTECTION COVER
STAND INSTALLATIONBACK COVER FOR WIRE ARRANGEMENT
Assemble the parts of the SSTTAANNDD BBOODDYY
with CCOOVVEERR BBAASSEE of the TV.2
Assemble the TV as shown.3
4
SSTTAANNDD BBOODDYY
CCOOVVEERR BBAASSEE
Carefully place the TV screen side down on a cush-ioned surface to protect the screen from damage.
1
GG When assembling the desk type stand, make surethe bolt is fully tightened (If not tightened fully,the TV can tilt forward after the product installa-tion). Do not over tighten.
GG With some TVs, the PLUG IN TYPE HOLDER
and the CABLE HOLDER are included. If theseholders are inserted into the hole provided onback of the TV, they cannot be removed.
NOTE!
or
x 4
Tighten the stand with thefour screws (provided asparts of the TV).
Tighten the two of these four screwsand the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tightenthe two Torx plus star head screws with a star head dri-ver bit (not provided as parts of the TV).
x 2 x 2
Connect the cables as necessary.
To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVEBRACKET/Screw or PLUG IN TYPE HOLDERfor power code. It will help prevent the powercable from being removed by accident.
PROTECTIVE BRACKET(This feature is not available for all models.)
PLUG IN TYPE HOLDER
Install the CABLE MANAGEMENT CLIP as shown.
If your TV has the CABLE HOLDER, install it asshown and bundle the cables.
CABLE MANAGEMENT CLIP
CABLE HOLDER
Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.
3322//3377//4422LLGG550000HH
or
PR
EPA
RA
TIO
N
16
PREPARATION
STAND INSTALLATION
Carefully place the product screen side downon a cushioned surface that will protect prod-uct and screen from damage.
Assemble the product stand with the productas shown.
Securely install the 4 bolts provided as shownbelow.
1
2
3
32/37LC5DC*, 32/37LC50C*
Carefully place the TV screen side down on acushioned surface to protect the screen fromdamage.
Assemble the product stand with the product asshown.
Tighten the 4 bolts securely using the holes inthe back of the TV.
1
2
3
42PG65C
GG After inserting the MPI slot/card, install theproduct stand.
NOTE
PR
EPA
RA
TIO
N
17
ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) onthe wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (not provided as parts of the product, must pur-chase separately) to tie the product. It is safer to tie the rope so itbecomes horizontal between the wall and the product.
The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the opti-
mum viewing angle.
SWIVEL STAND
20° (37LC5DC1, 42LC5DC, 42LC50C, 42PX8DC,
42LB5DC, 42LB50C, 42PG65C models)
90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C, 32/37/42LG500H
models)
This feature is not available for all models.
PR
EPA
RA
TIO
N
18
PREPARATION
ATTACHING THE TV TO A DESK
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially caus-ing injury or damaging the product.
* SSccrreewwss -- MM55 xx LL ((ttaabbllee ddeepptthh ++ 88~1100 mmmm))ex) table depth-15mm: Bolts - M5 x 25
4-Screws(not provided as parts of the product)
Stand
Desk
32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
4-Screws(not provided as parts of the product)
Stand
2-Screws(not provided as parts of the product)
Stand
42PG65C
42PX8DC
4-Screws(not provided as parts of the product)
Stand
Desk
Here shown may be somewhat different from your TV.
32LX5DC*, 32LX50C*
32/37/42LG500H
4-Screws(not provided as parts of the product)
Stand
Desk
PR
EPA
RA
TIO
N
19
VESA WALL MOUNTING
For proper ventilation, allow a clearance of 4inches on each
side from the wall.
Image shown may differ from your TV.
DESKTOP PEDESTAL INSTALLATION
GG Ensure adequate ventilation by following the clearance recommendations.
CAUTION
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
GG Screw length needed depends on the wall mount used. For further information, refer to the VESAWall Mounting Instruction Guide.
NOTE
Product ModelVESA
(A * B)
32LC5DC*, 32LC50C*, 32LX5DC*,32LX50C*, 32LG500H
37LG500H, 42LG500H
32/37/42LC5DC*, 32/37/42LC50C*,42LB5DC, 42LB50C
42PG60C
42PX8DC
200 * 100
200 * 200
600 * 400
400 * 400
600 * 400
LCD TV
PLASMA TV
AA
BB
4 inches
4 inches
4 inches4 inches
This feature is not available for all models.
This feature is not available for all models.
WARNING
GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installationinstructions. Tipping, shaking, or rocking the machine may cause injury.
1-Screw(provided as parts of the product)
Desk
Stand
32/37/42LG500H
PR
EPA
RA
TIO
N
20
PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections.
For optimum picture quality, adjust antenna direction if needed.
2. Cable
WallAntennaSocket
OutdoorAntenna(VHF, UHF)
Cable TVWall Jack
Multi-family Dwellings/Apartments(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wirewhen connecting the antenna.
Copper Wire
ANTENNAANTENNA IN IN M.P.I.
ANTENNAANTENNA IN IN M.P.I.
ANTENNAANTENNA IN IN M.P.I.
GG The TV will let you know when the analog, cable, and digital channel scans are complete.NOTE
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.
Antenna
UHF
Signal
Amplifier
VHF
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
21
HD RECEIVER SETUP
EXTERNAL EQUIPMENT SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.
( )
( )( )S-VIDEO
M.P.I.1(DVI)
RJPRFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
VIDEO AUDIO
Y L RPB PR
When connecting Component cable
1 2
1. How to connect
Connect the video outputs (Y, PB, PR) of the digital set
top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks onthe set. Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top box to
the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.2
1
2. How to use Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select CCoommppoonneenntt input source with using the IINNPPUUTT
button on the remote control.
Signal
480i
480p
720p
1080i
1080p
Component
Yes
Yes
Yes
Yes
Yes
HDMI1/DVI, HDMI2
No
Yes
Yes
Yes
Yes
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of external equipment setup mainly use picture for LCD TV(Except 32/37/42LG500H) models.
* 42LB5DC, 42LB50C model only
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
22
EXTERNAL EQUIPMENT SETUP
When connecting HDMI cable
Connect the digital set-top box to HHDDMMII//DDVVII IINN11((DDVVII)) or 22 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select HHDDMMII11//DDVVII or HHDDMMII22 input source with usingthe IINNPPUUTT button on the remote control.
2
1
( )
VIDEO AUDIO( )
M.P.I1(DVI)
RJPINTERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
( )
HDMI-DTV OUTPUT
1
GG If the device does not support Auto HDMI, you need to setthe output resolution appropriately.
NOTE
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
23
VIDEO AUDIOVIDEO
AUDIOMONO( )
S-VIDEO
REMOTECONTROL
OUT
RGB IN
AUDIOIN
(RGB, DVI)
RESET
UPDATE
M.P.I.1(DVI)
RJPINTERFACE
2
SERVICE ONLYHDMI/DVI IN
SPEAKEROUT8 AV IN 1COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
( )( )
L RDVI-DTV OUTPUT
Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set.
Connect the audio output of the digital set-top box to the AAUUDDIIOO IINN ((RRGGBB,,DDVVII)) jack on the set.
1. How to connect
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HHDDMMII11//DDVVII or HHDDMMII22 input source with using the IINNPPUUTT button on the remote control.
2. How to use
2
1
1
2
When connecting HDMI to DVI cable
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
24
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting Component cable
( )( )S-VIDEO
M.P.I.1(DVI)
RJPERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO OUT
(OPTICAL)
VIDEO AUDIO
Y L RPB PR
( )
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Connect the video outputs (Y, PB, PR) of the DVD tothe CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.
1. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select CCoommppoonneenntt input source with using the IINNPPUUTT
button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
1 2
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
25
When connecting with an S-Video cable
AUDIO
REMOTECONTROL
OUT
RESET
UPDATE
M.P.I.S
SPEOAV IN 1NT IN
GITALUDIO OUTTICAL)
( )( )
AUDIOMONO( )
S-VIDEOVIDEO
L RS-VIDEOAUDIO
1 2
VIDEO AUDIO( )
M.P.I1(DVI)
RJPINTERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO OUT
(OPTICAL)
( )
HDMI-DVD OUTPUT
( )
1
Connect the S-VIDEO output of the DVD to theSS --VVIIDDEEOO input on the set.
Connect the audio outputs of the DVD to the AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select AAVV11 input source with using the IINNPPUUTT button onthe remote control.
If connected to AAVV IINN22, select AAVV22 input source.
Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
Connect the HDMI output of the DVD to theHHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
Select HHDDMMII11//DDVVII or HHDDMMII22 input source with usingthe IINNPPUUTT button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
2
1
GG If the device does not support Auto HDMI, you need toset the output resolution appropriately.
NOTE
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
26
EXTERNAL EQUIPMENT SETUP
VCR SETUP
When connecting with an antenna
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen
may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
( )
( )
ANTENNAANTENNA IN IN M.PM.P.I..I.
L RS-VIDEO VIDEO
OUTPUTSWITCH
ANT IN
ANT OUT
Wall Jack
Antenna
1
2
Connect the RF antenna out socket of the VCR to the AAnntteennnnaa socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
1. How to connect
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
2. How to use
2
1
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
27
GG Do not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.
CAUTION
When connecting with a RCA cable
GG The picture quality is improved: compared to normalcomposite (RCA cable) input.
NOTE
AUDIO
REMOTECONTROL
OUT
R
RESET
UPDATE
M.P.I.SERV
SPEAKEOUT
8 AV IN 1T IN
TALDIO UTCAL)
AUDIOMONO( )
S-VIDEOVIDEO
( )
L RS-VIDEO VIDEO
OUTPUTSWITCH
ANT IN
ANT OUT
ANTENNA IN M.P.I.
( )
AUDIO
REMOTECONTROL
OUT
RESET
UPDATE
M.P.I.SER
SPEAKOUT
8 AV IN 1ENT IN
GITALAUDIO OUT
PTICAL)
AUDIOMONO( )
S-VIDEOVIDEO
L RS-VIDEO VIDEO
OUTPUTSWITCH
ANT IN
ANT OUT
ANTENNA IN M.P.I.
Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)
1. How to connect
2. How to use
Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)
Select AAVV11 input source with using the IINNPPUUTT button onthe remote control.
If connected to AAVV IINN22, select AAVV22 input source.
When connecting with an S-Video cable
Connect the S-VIDEO output of the VCR to theSS --VVIIDDEEOO input on the set.
Connect the audio outputs of the VCR to the AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
Insert a video tape into the VCR and press PLAY on the VCR.(Refer to the VCR owner’s manual.)
Select AAVV11 input source with using the IINNPPUUTT button onthe remote control.
If connected to AAVV IINN22, select AAVV22 input source.
1
2
1
GG If you have a mono VCR, con-nect the audio cable from theVCR to the AAUUDDIIOOLL//MMOONNOO jack of the set.
NOTE
1
1 2
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
28
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUTPUT
VIDEO AUDIO( )
S-V
M.P.I.1(DVI)
RJPNTERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
GG When connecting with external audio equipments, such as ampli-fiers or speakers, please turn the TV speakers off. (GG pp..5588)
NOTE
GG Do not look into the optical output port. Looking at thelaser beam may damage your vision.
CAUTION
Connect one end of an optical cable to the TV DigitalAudio (Optical) Output port.
Connect the other end of the optical cable to thedigital audio (optical) input on the audio equipment.
Set the “TV Speaker option - Off” in the AUDIOmenu. (GG pp..5588). See the external audio equipmentinstruction manual for operation.
1. How to connect
2
3
1
1
2
OTHER A/V SOURCE SETUP
AV IN 2L/
MONO
RAU
DIO
VIDE
O
S-VIDEO
L RVIDEO
Camcorder
Video Game SetConnect the AAUUDDIIOO/VVIIDDEEOO jacksbetween TV and external equipment.Match the jack colors.
(Video = yellow, Audio Left = white, andAudio Right = red)
1. How to connect
2. How to use
Select AAVV22 input source with using theIINNPPUUTT button on the remote control.
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
29
PC SETUP
When connecting HDMI to DVI cable
Connect the DVI output of the PC to the HHDDMMII//DDVVIIIINN 11((DDVVII)) jack on the set.
Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII)) jack on the set.
1. How to connect
2. How to use
Turn on the PC and the set
Select HHDDMMII11//DDVVII input source with using the IINNPPUUTT
button on the remote control.
2
1
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15pin cable
Connect the RGB output of the PC to the RRGGBB IINN
jack on the set.
Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB,, DDVVII)) jack on the set.
1. How to connect
2. How to use
Turn on the PC and the set.
Select RRGGBB--PPCC input source with using the IINNPPUUTT buttonon the remote control.
2
1
VIDEO( )
1(DVI)
RJPINTERFACE
2
HDMI/DVI IN
COMPONENT
DIGITAAUDIO
OUT(OPTICA
DVI-PC OUTPUT AUDIO
( )
( )
RGB IN
AUDIOIN
(RGB, DVI)
VICE ONLY
ER
( )
1
2
RGB OUTPUT AUDIO
( )
VIDEOAUDIO
MONO( )
REMOTECONTROL
OUT
RGB IN
AUDIOIN
(RGB, DVI)
ATE
SERVICE ONLY
SPEAKEROUT8 AV IN 1
12
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
30
EXTERNAL EQUIPMENT SETUP
GG Depending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.
GG Check the image on your TV. There may be noiseassociated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise is pre-sent, change the PC output to another resolution,change the refresh rate to another rate or adjustthe brightness and contrast on the VIDEO menuuntil the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change thePC graphic card or consult the manufacturer ofthe PC graphic card.
GG Avoid keeping a fixed image on the screen for along period of time. The fixed image may becomepermanently imprinted on the screen.
GG The synchronization input form for Horizontal andVertical frequencies is separate.
When using the remote control, aim it at the remote control sensor on the TV.
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND INFOSWAPEZ PIC
TIMER
MUTE
CH
SAP
CC RATIOMENU
VCR
POWER
1 2 3
4 5 6
7 8 9
0 FLASHBACK
PIP PIP CH - PIP CH + PIP INPUT
PAGE
NUMBER button
VCR/DVD control buttons
Turns your TV or any other programmed equipment onor off, depending on mode.
In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2input sources, screen returns to the last TV channel.
External input modes rotate in regular sequence: TV, AV1-2, Component, RGB, HDMI1/DVI and HDMI2.
Selects: RGB,HDMI1/DVI, HDMI2 and Component inputsources.
Adjusts brightness on screen.
Switches the sub picture Double Window or off mode. GGpp..4411--4422
Changes the PIP channel. GG pp..4422
Select the connected input source for the sub-picture. GG pp..4411
Selects the factory preset picture depend on the viewingenvironment. GG pp..4455
Selects the factory preset sound for type of program. GGpp..5555
Exchange the main/sub images. GG pp..4422
Control video cassette recorders or DVD players.
Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.
Tune to the last channel viewed.
POWER
TV INPUT
INPUT
MULTI
PIP
PIP CH +/-
PIP INPUT
EZ PIC
EZ SOUND
SWAP(or PIPSWAP)
— (DASH)
FLASH BACK
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
33
Open the battery compartment cover on the backside and install the batteries matching correctpolarity (+ with +, - with -).
Install two 1.5V AA batteries(or 1.5V AAA)Don’t mix old or used batteries with new ones.
Close cover.
Installing Batteries
Select the remote’s operating mode: TV, DVD, VCR (orSTB).
Change the aspect ratio. GG pp..4433--4444
Select a closed caption. GG pp..6622(*In DTV/CADTV mode GG pp..6633)
Navigate the on-screen menus and adjust the system set-tings to your preference.
Clears all on-screen displays and returns to TV viewingfrom any menu.
Displays the main menu.
Display information at the top of the screen.
Increase/decrease the sound level.
Select the amount of time before your TV turns off auto-matically. GG pp..6699
Switch the sound on or off. GG pp..3344
Select available channels.
Move from one full set of screen information to the next one.
MODE
RATIO
CC
THUMBSTICK(Up/Down/Left/Right/ENTER)
EXIT(orRETURN)
MENU
INFO
VOLUME UP/DOWN
TIMER
MUTE
CHANNELUP/DOWN
PAGEUP/DOWN
MUTE
RETURN
TIMER
TV POWER
RATIO CC
ENTER
VOL CH
1 2 3
4 5 6
7 8
0
9
FLASHBK
VCR
DVD
INPUT
MENU INFO i
STB
PAGE
PIP SAP
PIP CH- PIP CH+ PIP SWAP PIP INPUT
(Only 42PG60C, 42PG65C, 32/37/42LG500H models)
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
34
WATCHING TV /CHANNEL CONTROL
TURNING ON TV
NOTE
GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the (or OONN//OOFFFF) button onthe TV or press the PPOOWWEERR button on the remote control.
Select the viewing source by using the IINNPPUUTT((oorr TTVV IINNPPUUTT)) button onthe remote control.
This TV is programmed to remember which power state it was last set to,even if the power cord is out.
When finished using the TV, press the PPOOWWEERR button on the remote con-trol. The TV reverts to standby mode.
1
2
3
Press the CCHH (( ++ or -- )) or CCHH (( or )) or NNUUMMBBEERR buttons to selecta channel number.
1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Press the VVOOLL (( + or -) button to adjust the volume.
If you want to switch the sound off, press the MMUUTTEE button.
You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL (( + or -)button.
Adjust the volume to suit your personal preference.
1
2
3
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
35
ON-SCREEN MENUS SELECTION
Press the MMEENNUU button and then use DD or EE or or button to select the eachmenu.
Press the GG or button and then use DD EE FF GG or button to display theavailable menus.
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
2
1
SETUP VIDEO
SCREEN
TIME
AUDIO
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
EZ Picture
Color Temperature
XD
Advanced
Reset
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV Speakers
Auto Clock
Manual Clock
Off Timer
On Timer
Auto Off
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
LOCK
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
OPTION
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Only 42PX8DC model
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
36
WATCHING TV /CHANNEL CONTROL
CHANNEL SETUP
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select EEZZ SSccaann.
Press the EENNTTEERR button to begin the channel search.Allow EEZZ SSccaann to complete the channel search cyclefor AANNTTEENNNNAA and CCAABBLLEE.
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.
EZ Scan G
Manual Scan
Channel Edit
DTV Signal
Channel LabelSelection ( G or ) leads youto the EZ scan screen.
EZ Scan G
Manual Scan
Channel Edit
DTV Signal
Channel Label
2
3
1
1
2
3
Auto Scan (EZ Scan)
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Selection ( G or ) leads youto the EZ scan screen.
MENU Prev.Next
Processing EZ scan...
ANALOG 9
Found Channel(s) 4
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
37
A password is required to gain access to Manual Scan
menu if the Lock System is turned on.
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select MMaannuuaall SSccaann.
Press the GG or button and then use DD or EE oror button to select Analog(TT VV, CCAATTVV),
Digital(DDTTVV, CCAADDTTVV).
Press the GG or button and then use DD or EE oror button to select channel you want to add or
delete.
Press the EENNTTEERR button to add or delete the channel.
Press the EEXXIITT or RREETTUURRNN button to return to TVviewing or press MMEENNUU button to return to the previ-ous menu.
EZ Scan
Manual Scan G
Channel Edit
DTV Signal
Channel Label
Channel Type Number
ANALOG 2
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
2
1
4
3
6
5
Channel Type Number
ANALOG GG 2
Press to delete the channel.
ANALOG 2
DDEE
1
2
3 4 5
Add/Delete Channel (Manual Scan)
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
38
WATCHING TV /CHANNEL CONTROL
A Custom List can be created by toggling each channel on
or off with ENTER button. The channels in the Custom List
are displayed in black, and the channels deleted from the
Custom List are displayed in gray. Once a channel is high-
lighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.
A password is required to gain access to Manual Scan menu
if the Lock System is turned on.
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select CChhaannnneell EEddiitt.
Press the GG or button and then use DD or EE oror button to select AANNAALLOOGG or DDIIGGIITTAALL.
Press the GG or button and then use DD or EE oror button to select channel and then use the
EENNTTEERR button to add or delete it.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
2
1
3
4
5
1
2
3 4
Channel Editing
DDEE
G
DD
EE
ANALOG
EZ Scan
Manual Scan
Channel Edit G
DTV Signal
Channel Label
ANALOG
DD
EE
2-0
4-0
6-0
9-0
11-0
13-0
14-0
2-0
4-0
6-0
9-0
11-0
13-0
14-0
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
39
DTV SIGNAL STRENGTH
This feature displays the DTV signal levels being received
and indicates whether you need to adjust your antenna or
digital cable input. The higher the signal strength, the less
likely you are to experience picture degradation.
DTV Signal: This function is only available when the input
signal is DTV or CADTV.
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select DDTTVV SSiiggnnaall ..
View the on-screen signal strength monitor to seethe quality of the signal being received.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previ-ous menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label
Bad Normal Good
2
3
4
1
1
2 3
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
WA
TC
HIN
G T
V / C
HA
NN
EL C
ON
TR
OL
40
WATCHING TV /CHANNEL CONTROL
CHANNEL LABEL
Choose preset labels for your channels. If a channel label is provided on the signal from thebroadcasting station, the TV displays a short name for achannel even if you didn't preset a label for the channel.
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select CChhaannnneell LLaabbeell ..
Press the GG or button and then use DD or EE oror button to select a channel to label.
Press the GG or button and then use DD or EE oror button to select the appropriate label for thechannel.
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label G
2
3
4
5
1
1
2 3
Ch. ANALOG 2
Logo No Logo
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
41
WATCHING DW (DOUBLE WINDOW)
PICTURE CONTROL
Double Window mode splits the screen into two images, allowing two picture
sources to be shown on the TV screen at the same time. Each source is given half
the screen.
Watching Double Window
Press the PP IIPP button to access the sub picture.
DW Mode
Selecting an Input Signal Source for Double Window
Use the PPIIPP IINNPPUUTT button to select the input source for the sub picture.
Each press of PPIIPP IINNPPUUTT button changes the PIP source.
PIP Off
Use the PPIIPP IINNPPUUTT button to select the input source for the sub picture. Each press of PPIIPP IINNPPUUTT buttonchanges the PIP source.
Main Picture Source Available Sub Picture Sources
TV AV1, AV2
AV1 TV, AV2
AV2 TV, AV1
RGB, Component, HDMI1/DVI, HDMI2 TV, AV1, and AV2
PIC
TU
RE
CO
NT
RO
L
42
PICTURE CONTROL
Repeatedly, use the SSWWAAPP or PPIIPP SSWWAAPP button to switch the main and sub pictures.
Component, RGB, HDMI1/DVI, HDMI2 input sources for the main picture can’t be used to swap themain and sub pictures.
Swapping the PIP / Double Window
1
TV Program Selection for PIP
Use the PPIIPP CCHH ++//-- button to select a channel for the sub picture.
The selected channel number is displayed just below the input source of main picture.
1
PIC
TU
RE
CO
NT
RO
L
43
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you
need to specify how the picture is to be displayed.
RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
Set by program
Selects the proper picture proportion to match the source’s image.
4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Press the RRAATTIIOO button repeatedly to select the desired picture format.
You can also adjust AAssppeecctt RRaattiioo in the OOPPTTIIOONN menu.
1
4:3
Set By Program Set By Program
(4:3 4:3) (16:9 16:9)
16:9
PIC
TU
RE
CO
NT
RO
L
44
PICTURE CONTROL
Horizon
The screen size is, more enlarged at both sides, to create a spectacular view.
Zoom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portionsof the picture will be cropped.
Zoom 2
Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The pic-ture taking a halfway trade off between alteration and screen coverage.
Horizon
Zoom 1
Zoom 2
PIC
TU
RE
CO
NT
RO
L
45
PRESET PICTURE SETTINGS
EZ Picture - Preset
Press the EEZZ PPIICC button repeatedly to select the pictureappearance setup option as below(Except 42PG60C,42PG65C models):
DDaayyll iigghhtt, NNoorrmmaall, NNiigghhtt TTiimmee, UUsseerr11, and UUsseerr22
(your own settings).
Press the EEXXIITT or RREETTUURRNN button to save and return to TVviewing.
EZ Picture adjusts the TV for the best picture appearance. Select
the preset value in the EZ Picture menu based on the program
category.
DDaayylliigghhtt, NNoorrmmaall, NNiigghhtt TTiimmee Settings are preset for the opti-
mum picture quality at the factory and are not adjustable.
In the UUsseerr11 and UUsseerr22 modes only, user can directly adjust
the contrast, brightness, color, sharpness, tint.
You can also use the VVIIDDEEOO menu to adjust EEZZ PPiiccttuurree.
2
1
EZ Picture G
Color Temperature
XD
Advanced
Reset
Daylight
Normal
Night time
User 1
User 2
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
46
PICTURE CONTROL
Color Tone - Preset
Choose one of three automatic color adjustments. Set to
warm to enhance hotter colors such as red, or set to cool
to see less intense colors with more blue.
When selecting EZ Picture (User 1 and User 2), you canchoose the CCoolloorr TTeemmppeerraattuurree.
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select CCoolloorr TTeemmppeerraattuurree.
Press the GG or button and then use DD or EE oror button to select either CCooooll, NNoorrmmaall, WWaarrmm orUUsseerr.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
2
3
4
1
EZ Picture
Color Temperature G
XD
Advanced
Reset
Cool
Normal
Warm
User
1
2 3
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
47
MANUAL PICTURE ADJUSTMENT
EZ Picture - User Mode
Adjust the picture appearance to suit your preference and
viewing situations.
This feature operate only if the EZ Picture set UUsseerr 11 orUUsseerr 22.
EZ Picture
Color Temperature
XD
Advanced
Reset
Daylight
Normal
Night Time
User 1 G
User 2
Contrast 85 FF G
EE
User1
Contrast 85 G
Brightness 50
Color 50
Sharpness 50
Tint 0 R G
1
2 3
4
5
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select EEZZ PPiiccttuurree.
Press the GG or button and then use DD or EE oror button to select UUsseerr 11 or UUsseerr 22.
Press the GG or button and then use DD or EE oror button to select the desired picture option((CCoonnttrraasstt, BBrriigghhttnneessss, CCoolloorr, SShhaarrppnneessss, orTTiinntt)).
Press the GG or button and then use FF or GG or
or button to make appropriate adjustments.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
2
3
4
5
6
1
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
48
PICTURE CONTROL
You can also adjust the detailed settings (Red, Green, Blue)
by selecting the CCoolloorr TTeemmppeerraattuurree--UUsseerr menu.
Color Tone - User Mode
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select CCoolloorr TTeemmppeerraattuurree.
Press the GG or button and then use DD or EE oror button to select UUsseerr.
Press the GG or button and then use DD or EE oror button to select RReedd, GGrreeeenn, or BBlluuee.
Press the GG or button and then use FF or GG oror button to make appropriate adjustments.
The adjustment range of RReedd, GGrreeeenn, or BB ll uuee is-40 ~ +40.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
EZ Picture
Color Temperature
XD
Advanced
Reset
2
3
4
5
6
1
User
Red 0 G
Green 0
Blue 0
Cool
Normal
Warm
User G
Red 0 FF G
EE
2 3
1
4
5
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
49
XD - PICTURE IMPROVEMENT TECHNOLOGY
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select XX DD.
Press the GG or button and then use DD or EE oror button to select AAuuttoo or MMaannuuaall.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
XD is LG Electronic’s unique picture improving technology
to display a real HD source through an advanced digital sig-
nal processing algorithm.
When selecting EZ Picture options (Daylight, Normal and
Night time), XD is automatically changed to Auto.
When selecting EZ Picture options (User 1 and User 2), you
can choose the Auto / Manual.
When selecting the Manual, you can adjust the XD
Contrast, XD color and XD Noise.
EZ Picture
Color Temperature
XD G
Advanced
Reset
2
3
4
1
SSeelleeccttiinngg tthhee MMaannuuaall MMooddee
1. Press the GG or button and then use DD or EEor or button to select XXDD CCoonnttrraasstt, XXDDCCoolloorr or XXDD NNRR ((NNooiissee)), MMPPEEGG NNRR.
XXDD CCoonnttrraasstt:: Optimizing the contrast automati-cally according to the brightness of the reflection.
XXDD CCoolloorr:: Adjusting the colors of the reflectionautomatically to reproduce as closely as possibleto the natural colors.
XXDD NNRR ((NNooiissee)):: Removing the noise up to thepoint where it does not damage the original pic-ture.
MMPPEEGG NNRR:: To reduce the picture noise which mayappear on the screen during watching the TV.
2. Press the FF or GG or or button to select OOnn
or OOffff.
2 3
1
Auto
Manual
XD Contrast
On
XD Color On
XD NR
Off
MPEG NR 0
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
50
PICTURE CONTROL
ADVANCED - CINEMA MODE
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select AAddvvaanncceedd.
Press the GG or button and then use DD or EE oror button to select CCiinneemmaa.
Press the GG or button and then use DD or EE oror button to select OO nn or OOff ff.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Set up the TV for the best picture appearance for viewing
movies.
When you operate Cinema (3:2 Pull-Down Mode or Cinema
Correction Mode), the TV will adjust 24 fps video from
movies to 30 fps video for display.
This feature operates only in Analog, AV1, AV2, and
Component 480i mode.
2
3
4
5
1
2 3 4
1
EZ Picture
Color Temperature
XD
Advanced G
Reset
Cinema
Off
Black level
Low
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
51
ADVANCED - BLACK (DARKNESS) LEVEL
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select AAddvvaanncceedd.
Press the GG or button and then use DD or EE oror button to select BBllaacckk lleevveell.
Press the GG or button and then use DD or EE oror button to select LLooww or HHiigghh.
LLooww
The screen gets darker.
HHiigghh
The screen gets brighter.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Adjusting the contrast and the brightness of the screen
using the black level of the screen.
This feature operates only in AV1, AV2, HDMI1/DVI, or
HDMI2mode.
EZ Picture
Color Temperature
XD
Advanced G
Reset
Cinema
Off
Black level
Low
2
3
4
5
1
3 42
1
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
52
PICTURE CONTROL
PICTURE RESET
Press the MMEENNUU button and then use DD or EE oror button to select the VVIIDDEEOO menu.
Press the GG or button and then use DD or EE oror button to select RReesseett.
Press the GG or button to reset the Video menuoptions to original values.
Use to quickly reset all the Video menu options to their
original factory preset values.
EZ Picture
Color Temperature
XD
Advanced
Reset GTo set
2
3
1
2 3
1
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
LOW-POWER PICTURE MODE (Only 42PX8DC model)
Low power reduces the plasma display power consumption.
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select LLooww PPoowweerr.
Press the GG or button and then use DD or EE oror button to select OO nn or OOff ff.
When you select On, the screen darkens.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
2
3
4
1
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power G
Set ID
Off
On
1
32
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PIC
TU
RE
CO
NT
RO
L
53
IMAGE STICKING MINIMIZATION(ISM) METHOD
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select IISSMM MMeetthhoodd.
Press the GG or button and then use DD or EE oror button to select either NNoorrmmaall, WWhhiittee WWaasshh,
OOrrbbiitteerr or IInnvveerrssiioonn.
NNoorrmmaall
If image sticking is never a problem, ISM is not necessaryset to Normal.
WWhhiittee wwaasshh
White Wash removes permanent images from thescreen.
OOrrbbiitteerr
Orbiter may help prevent ghost images. However, itis best not to allow any fixed image to remain on thescreen. To avoid a permanent image on the screen,the image will move once per 2 minutes : Left Right Upside Downside Right Left Downside Upside.
IInnvveerrssiioonn
Inversion will automatically invert the plasma displaypanel color every 30 minutes.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
A frozen still picture from a PC/video game displayed on
the screen for prolonged periods will result in a ghost
image. Use our unique method to minimize any fixed image
on the screen.
NOTE
An excessive permanent image may be impossibleto clear entirely with White Wash. To return tonormal viewing, press any button.
2
3
4
1
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method G
Low Power
Set ID
Normal
White Wash
Orbiter
Inversion
1
32
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
54
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (EZ SOUNDRITE)
Press the MMEENNUU button and then use DD or EE oror button to select the AAUUDDIIOO menu.
Press the GG or button and then use DD or EE oror button to select EEZZ SSoouunnddRRiittee.
Press the GG or button and then use DD or EE oror button to select OO nn or OOff ff.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Scans for changes in sound levels during commercials, then
adjusts the sound to match the specified audio level.
SoundRite makes sure that the volume level remains consis-
tent whether you are watching a commercial or a regular TV
program.
2
3
4
1
Audio Language
EZ SoundRite G
EZ Sound
Balance 0
TV Speakers
Off
On
2 3
1
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
55
PRESET SOUND SETTINGS (EZ SOUND)
EZ Sound lets you enjoy the best sound without any special
adjustment because the TV sets the appropriate sound options
based on the program content.
Normal, Stadium, News, Music and Theater are preset for good
sound quality at the factory and are not adjustable.
Press the EEZZ SSOOUUNNDD button repeatedly to select theappropriate sound setup as below(Except 42PG60C,42PG65C models):
NNoorrmmaall, SSttaaddiiuumm, NNeewwss, MMuussiicc, TThheeaatteerr, and UUsseerr
(your own settings).
Press EEXXIITT or RREETTUURRNN button to return to TV viewing.
You can also adjust EEZZ SSoouunndd in the AAUUDDIIOO menu.
2
1
Audio Language
EZ SoundRite
EZ Sound G
Balance 0
TV Speakers
Normal
Stadium
News
Music
Theater
User
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
56
SOUND &LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Front Surround Off
33DD EEcchhooSSoouunndd SSyysstteemm
Creates a stunning simulated stereo effect from any monosound and a realistic three-dimensional sound with a verywide and deep sound stage.
Press the MMEENNUU button and then use DD or EE oror button to select the AAUUDDIIOO menu.
Press the GG or button and then use DD or EE oror button to select EEZZ SSoouunndd.
Press the GG or button and then use DD or EE oror button to select UUsseerr.
Press the GG or button and then use DD or EE oror button to select the desired sound option(TTrreebbllee, BBaassss, or FFrroonntt SSuurrrroouunndd).
or button to select OOff ff or 33DD EEcchhooSSoouunnddSSyysstteemm.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV Speakers
Normal
Stadium
News
Music
Theater
User G
User
Treble 50 G
Bass 50
Front Surround Off
2
3
4
5
6
1
2
1
3
4
5
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
57
BALANCE ADJUSTMENT
Press the MMEENNUU button and then use DD or EE oror button to select the AAUUDDIIOO menu.
Press the GG or button and then use DD or EE oror button to select BBaallaannccee.
Press the GG or button and then use FF or GG or
or button to make appropriate adjustments.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Adjust the left/right sound of speaker to suit your taste and
room situations.
2
3
4
1
1
2
3
Audio Language
EZ SoundRite
EZ Sound
Balance 0 G
TV Speakers
L R
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV Speakers
FF GL R
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
58
SOUND &LANGUAGE CONTROL
TV SPEAKERS ON/OFF SETUP
Press the MMEENNUU button and then use DD or EE oror button to select the AAUUDDIIOO menu.
Press the GG or button and then use DD or EE oror button to select TTVV SSppeeaakkeerrss.
Press the GG or button and then use DD or EE oror button to select OO nn or OOff ff.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Turn the TV speakers off if using external audio equipment.
Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speakers G Off
On
2
3
4
1
2 3
1
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
59
STEREO/SAP BROADCAST SETUP
This TV can receive MTS stereo programs and any SAP(Secondary Audio Program) that accompanies the stereo pro-
gram if the station transmits an additional sound signal as well
as the original one and when you select Stereo or SAP on the
remote control.
Mono sound is automatically received if the broadcast is only in
Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to the mono sound in remote
areas during stereo/SAP broadcasting.
Stereo or SAP can be received in Analog channel.
Use the SSAAPP button to select your desired MTS mode inanalog signal. Each time you press the SSAAPP button, MMoonnoo,SStteerreeoo, or SSAAPP appear in turn.
If other languages available on the digital signal, selectthem with the SSAAPP button.
Press EEXXIITT or RREETTUURRNN button to save and return to TVviewing.
2
1
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
60
SOUND &LANGUAGE CONTROL
AUDIO LANGUAGE
Other languages may be available if a digital signal is provided
by the broadcasting station.
This feature operates only in DTV/CADTV mode.
Press the MMEENNUU button and then use DD or EE oror button to select the AAUUDDIIOO menu.
Press the GG or button and then use DD or EE oror button to select AAuuddiioo LLaanngguuaaggee.
Press the GG or button and then use DD or EE oror button to select: EEnnggll iisshh, SSppaanniisshh, or
FFrreenncchh.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Audio Language G
EZ Sound
Balance
TV Speakers
English
Spanish
French
2
3
4
1
2 3
1
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
61
ON-SCREEN MENUS LANGUAGE SELECTION
Aspect Ratio
Caption/Text
Caption Options
Language G
ISM Method
Low Power
Set ID
The menus can be shown on the screen in the selected lan-
guage. First select your language.
English
Spanish
French
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select LLaanngguuaaggee..
Press the GG or button and then use DD or EE oror button to select your desired language.
From this point on, the on-screen menus will be shownin the selected language.
Press the EEXXIITT or RREETTUURRNN button to return to TVviewing or press MMEENNUU to return to the previousmenu.
1
2
3
4
1
32
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
62
SOUND &LANGUAGE CONTROL
CAPTION / TEXT
Use the CC CC button repeatedly to select Caption OOff ff, CCCC11, CCCC22, CCCC33,CCCC44, TTeexxtt11, TTeexxtt22, TTeexxtt33 or TTeexxtt44.
CCAAPPTTIIOONN
The term for the words that scroll across the bottom of the TV screen; usual-ly the audio portion of the program provided for the hearing impaired.
TTEEXXTT
The term for the words that appear in a large black frame and almost coverthe entire screen; usually messages provided by the broadcaster.
Press EEXXIITT or RREETTUURRNN to save and return to TV viewing.2
1
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a
program. Analog caption displays information at any position on the screen and
is usually the program's dialog.
Text displays information, usually at the bottom position and is used for a data
service, generally not program related.
Caption/Text, if provided by the broadcaster, would be available for both digital
and analog channels on the Antenna/Cable.
This TV is programmed to memorize the caption/text mode which was last set
when you turn the power off.
When you select the CC1 ~ Text4, Caption options must be disabled.
You can also use the OOPPTTIIOONN menu to select CCaappttiioonn/TTeexxtt.
Aspect Ratio
Caption/Text G
Caption Options
Language
ISM Method
Low Power
Set ID
Off
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
63
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select CCaappttiioonn/TTeexxtt.
Press the GG or button and then use DD or EE oror button to select available caption languages:
EEnnggll iisshh, SSppaanniisshh, or FFrreenncchh.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Choose the language you want the DTV/CADTV Captions
to appear in.
Other Languages can be chosen for digital sources only if
they are included on the program.
Aspect Ratio
Caption/Text G
Caption Options
Language
ISM Method
Low Power
Set ID
Off
English
Spanish
French
2
3
4
1
1
32
Digital Broadcasting System Captions
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SO
UN
D &
LAN
GU
AG
E C
ON
TR
OL
64
SOUND &LANGUAGE CONTROL
CAPTION OPTIONS
Aspect Ratio
Caption/Text
Caption Options G
Language
ISM Method
Low Power
Set ID
Set by Program
Custom
1
3
4
2
Customize the DTV/CADTV captions that appear on your
screen.
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select CCaappttiioonn OOppttiioonnss.
Press the GG or button and then use DD or EE oror button to select CCuussttoomm.
Press the GG or button and then use DD or EE oror button to customize the SSttyyllee, FFoonntt, etc.,
to your preference.
A preview icon is provided at the bottom of thescreen, use it to see the caption language.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
2
3
4
5
1
GG SSiizzee: Set the word size.
GG FFoonntt: Select a typeface for the text.
GG TTeexxtt CCoolloorr: Choose a color for the text.
GG TTeexxtt OOppaacciittyy: Specify the opacity for the text color.
GG BBgg ((BBaacckkggrroouunndd)) CCoolloorr: Select a background color.
GG BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy: Select the opacity for thebackground color.
GG EEddggee TTyyppee: Select an edge type.
GG EEddggee CCoolloorr: Select a color for the edges.
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Size FF A Standard G
Font Font 0
Text Color White
Text Opacity Solid
Bg Color Black
Bg Opacity Solid
Edge Type None
Edge Color Black
TIM
E S
ET
TIN
G
65
CLOCK SETTING
TIME SETTING
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the
current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly
by the auto clock function.
The factory default value of the Auto Clock is Off, because
a clock information sent each broadcasting station is different.
Press the MMEENNUU button and then use DD or EE oror button to select the TTIIMMEE menu.
Press the GG or button and then use DD or EE oror button to select AAuuttoo CClloocckk.
Press the GG or button and then use DD or EE oror button to select OO nn.
Press the GG or button and then use DD or EE oror button to select your viewing area time zone
U.S.A : EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, AAllaasskkaa or HHaawwaaiiii.
Press the GG or button and then use DD or EE oror button to select AAuuttoo, OOff ff, OO nn, depending onwhether or not your viewing area observes DaylightSaving time.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Auto Clock G
Manual Clock
Off Timer
On Timer
Auto Off
Off
On
Time Zone
Eastern
Daylight Savings
Auto
2
3
4
5
6
1
1
32 54
Auto Clock
Manual Clock
Off Timer
On Timer
Auto OffSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
TIM
E S
ET
TIN
G
66
TIME SETTING
Manual Clock Setup
Press the MMEENNUU button and then use DD or EE oror button to select the TTIIMMEE menu.
Press the GG or button and then use DD or EE oror button to select MMaannuuaall CClloocckk.
Press the GG or button and then use FF or GG or
or to select either the year, date, or time option.Once selected, use the DD or EE or or button toset the year, date, and time option.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
If the current time setting is wrong, reset the clock manually.
Auto Clock
Manual Clock G
Off Timer
On Timer
Auto Off
Year
- - - -
Date
- - / - -
Time
- - : - - - -
2
3
4
1
1
32
Auto Clock
Manual Clock
Off Timer
On Timer
Auto OffSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
TIM
E S
ET
TIN
G
67
AUTO ON/OFF TIMER SETTING
Press the MMEENNUU button and then use DD or EE oror button to select the TTIIMMEE menu.
Press the GG or button and then use DD or EE oror button to select OOffff TTiimmeerr or OOnn TTiimmeerr.
Press the GG or button and then use DD or EE oror button to select OO nn.
To cancel the OOnn//OOffff tt iimmeerr function, select OOff ff.
Press the GG or button and then use DD or EE oror button to set the hour.
Press the GG or button and then use DD or EE oror button to set the minutes.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Auto Clock
Manual Clock
Off Timer
On Timer G
Auto Off
2
3
4
5
6
1
The timer function operates only if the current time has
been set.
The Off-Timer function overrides the On-Timer function if
they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV
turns on with the On Timer function, the TV will automatically
revert to standby mode.
1
32 54
Off
On
6 : 30 AM
Auto Clock
Manual Clock
Off Timer
On Timer
Auto OffSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
TIM
E S
ET
TIN
G
68
TIME SETTING
AUTO SHUT-OFF SETTING
If set to on and there is no input signal, the TV turns off
automatically after 10 minutes.
Press the MMEENNUU button and then use DD or EE oror button to select the TTIIMMEE menu.
Press the GG or button and then use DD or EE oror button to select AAuuttoo OOffff.
Press the GG or button and then use DD or EE oror button to select OO nn or OOff ff.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Auto Clock
Manual Clock
Off Timer
On Timer
Auto Off G Off
On
If set to On and there is
no input signal, the TV
turns automatically
after 10 minutes.
2
3
4
1
1
32
Auto Clock
Manual Clock
Off Timer
On Timer
Auto OffSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
TIM
E S
ET
TIN
G
69
SLEEP TIMER SETTING
Press the TTIIMMEERR button repeatedly to select the number ofminutes. First the OOff ff option appears on the screen, followedby the following sleep timer options: 10, 20, 30, 60, 90,120, 180, and 240 minutes.
When the number of minutes you want is displayed on thescreen, press the EENNTTEERR button. The timer begins to countdown from the number of minutes selected.
To check the remaining minutes before the TV turns off, pressthe TTIIMMEERR button once.
To cancel the Sleep Timer, press the TTIIMMEERR button repeatedlyto select OOff ff.
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
2
3
4
1
SC
RE
EN
AD
JUS
TM
EN
T
70
SCREEN ADJUSTMENT
AUTO CONFIGURE (RGB [PC] MODE ONLY)
Press the MMEENNUU button and then use DD or EE oror button to select the SSCCRREEEENN menu.
Press the GG or button and then use DD or EE oror button to select AAuuttoo ccoonnff iigg...
Press the GG or button to start AAuuttoo ccoonnff iigg...
When AAuuttoo ccoonnff iigg.. has finished, OO KK will beshown on screen.
If the position of the image is still not correct, tryAuto adjustment again.
If the picture needs to be adjusted more after Autoadjustment in RGB (PC), you can adjust the MMaannuuaallccoonnff iigg...
Press the EEXXIITT or RREETTUURRNN button to return to TVviewing or press the MMEENNUU button to return to theprevious menu.
Automatically adjusts picture position and minimizes image
shaking.
Although the image is still not correct, your set is functioning
properly but needs further adjustment.
1
2
3
4
5
1
2 3
Auto config. G
Manual config.
XGA Mode
Reset
To set
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SC
RE
EN
AD
JUS
TM
EN
T
71
MANUAL CONFIGURE
If the picture isn’t clear after auto adjustment and especial-
ly if characters are still trembling, adjust the picture phase
manually.
This function works in the following mode: RGB-PC, RGB-DTV,
Component 480p/720p/1080i, HDMI 480p/720p/1080i.
The Phase, Clock functions work in the following mode:
RGB-PC mode.
Press the MMEENNUU button and then use DD or EE oror button to select the SSCCRREEEENN menu.
Press the GG or button and then use DD or EE oror button to select MMaannuuaall ccoonnff iigg...
Press the GG or button and then use DD or EE oror button to select PPhhaassee, CClloocckk, HH--ppoossii--
tt iioonn or VV--ppoossiitt iioonn.
PPhhaassee
This function allows you to remove any horizontalnoise and clear or sharpen the image of characters.
CClloocckk
This function is to minimize any vertical bars orstripes visible on the screen background. And thehorizontal screen size will also change.
HH--ppoossiitt iioonn / VV--ppoossiitt iioonn
This function is to adjust picture to left/right andup/down as you prefer.
Press the FF or GG or or button to make appro-priate adjustments.
Press the EEXXIITT or RREETTUURRNN button to return to TVviewing or press the MMEENNUU button to return to theprevious menu.
1
2
3
4
5
2 3 4
1
Auto config.
Manual config. G
XGA Mode
Reset
Phase 0
Clock 0
H-Position 0
V-Position 0
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SC
RE
EN
AD
JUS
TM
EN
T
72
SCREEN ADJUSTMENT
SELECTING XGA MODE
To see a normal picture, match the resolution of RGB mode and
selection of XGA mode.
This function works in the following mode: RGB-PC mode.
If you select the 1600x1200, 1920x1200 resolution, uuXXGGAAmmooddee is displayed.
Press the MMEENNUU button and then use DD or EE oror button to select the SSCCRREEEENN menu.
Press the GG or button and then use DD or EE oror button to select XXGGAA mmooddee.
Press the GG or button and then use DD or EE oror button to select the desired XGA resolu-
tion.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
2
3
4
1
1
2 3
Auto config.
Manual config.
XGA Mode G
Reset
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SC
RE
EN
AD
JUS
TM
EN
T
73
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS)
This function operates in current mode.
To initialize the adjusted value.
Press the MMEENNUU button and then use DD or EE oror button to select the SSCCRREEEENN menu.
Press the GG or button and then use DD or EE oror button to select RReesseett.
Press the GG or button.
1
2
3
1
2 3
Auto config.
Manual config.
XGA Mode
Reset G To set
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
74
PARENTAL CONTROL / RATINGS
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratingssent by the broadcasting station. The default setting is to allow all programs to be viewed.Viewing can be blocked by choosing the type of the program and the categories. It is also possi-ble to block all program viewing for a time period. To use this function, the following must bedone:
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and televisionmovies can be blocked by TV Rating and/or Individual Categories. Movies that have been shownat the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including made-for-TV movies:
TV-G (General audience)
TV-PG (Parental guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
TV-Y (All children)
TV-Y7 (Children 7 years older)
SET PASSWORD & LOCK SYSTEM
Set up blocking schemes to block specific channels, ratings, andexternal viewing sources.
A password is required to gain access to this menu.
Press the MMEENNUU button and then use the DD or EE oror button to select the LLOOCCKK menu. Then, press the GGor button.
Enter the password as requested.
The TV is set up with the initial
password “0-0-0-0”.
Enter Password
1
Enter Password
** * *
Setting up your password
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
75
After inputting the password, use the DD or EE oror button to choose SSeett ppaasssswwoorrdd.
Press the GG or button and then choose any 4digits for your new password.
As soon as the 4 digits are entered, re-enter the same4 digits on the CCoonnff ii rrmm.
Then your changed password has been memorized.
Press EEXXIITT or RREETTUURRNN to return to TV viewing orpress MMEENNUU to return to the previous menu.
Change the password by inputting a new password twice.
Lock System
Set Password G
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
New
Confirm
2
3
1
****
****
1
2
NOTE
GG If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’on the remote control.
After inputting the password, use the DD or EE oror button to choose LLoocckk SSyysstteemm.
Press the GG or button and then use the DD or EEor or button to select OO nn or OOff ff.
When you select OO nn, the Lock System is enable.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Enables or disables the blocking scheme you set up previously.
Lock System G
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
Off
On
2
3
1
1
2
Set Password
Lock System
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
76
PARENTAL CONTROL /RATINGS
CHANNEL BLOCKING
EXTERNAL INPUT BLOCKING
Blocks any channels that you do not want to watch or that
you do not want your children to watch.
After inputting the password, use the DD or EE oror button to choose BBlloocckk CChhaannnneell.
Press the GG or button. You will now see a screenfilled with channel numbers and a preview picture.
Use DD EE FF GG or button to select achannel and then use the EENNTTEERR button to block orunblock it.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Lock System
Set Password
Block Channel G
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
2
3
4
1
1 2
Enables you to select a source to block from the external
source devices you have hooked up.
After inputting the password, use the DD or EE oror button to choose AAuuxx.. BBlloocckk.
Press the GG or button and then use the FF or GGor or button to select a source.
Press the GG or button and then use the DD or EEor or button to select OO nn or OOff ff on theeach source.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block G
Downloadable Rating
AV1 On
AV2 On
Component Off
RGB Off
HDMI1/DVI On
HDMI2 Off
2
3
4
1
1
32
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Off
On
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
1
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
77
MOVIE & TV RATING
Movie Rating (MPAA) -for USA only
Blocks movies according to the movie ratings limits specified, so children cannot view
certain movies. You can set the ratings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that the movie ratings limit only applies
to movies shown on TV, not TV programs, such as soap operas.
After inputting the password, use the DD or EE oror button to choose MMoovviiee RRaattiinngg.
Press the GG or button and then use the DD or EEor or button to select GG, PP GG, PPGG--1133, RR,NNCC--1177 or XX.
G (General audiences)
PG (Parental guidance suggested)
PG-13 (Parents strongly cautioned)
R (Restricted)
NC-17 (No one 17 and under admitted)
X (Adult only)
Blocking Off (Permits all programs)
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
GG If you set PG-13: G and PG movies will be available,PG-13, R, NC-17 and X will be blocked.
Lock System
Set Password
Block Channel
Movie Rating G
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
GPGPG-13RNC-17
X
Blocking Off
2
3
1
1
2
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Downloadable Rating
After inputting the password, use the DD or EE or orbutton to choose DDoowwnnllooaaddaabbllee RRaattiinngg.
Press the GG or button and then use the DD or EE oror button to select DDiimm00, DDiimm11, DDiimm22, or DDiimm33.
Press the GG or button and then use the DD or EEor or button to select DD11LL11, DD11LL22, or DD11LL33.
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
2
3
1
4
GG This function may become available in the future andwill be available only for digital channel signal.
GG This function operates only when TV has receivedRegion5 Rating data.
NOTE
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating G
2
1
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUPDownloadable Rating
Dim0
Dim1
Dim2
Dim3
GG Based on rating table, your TV's OSD (OnScreen Display) may differ slightly from whatis shown in this manual.
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
For USA For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
78
PARENTAL CONTROL /RATINGS
TV Rating Children -for USA only
After inputting the password, use the DD or EE or orbutton to choose TTVV RRaattiinngg--CChhii llddrreenn.
Press the GG or button and then use the DD or EE oror button to select AAggee, or FFaannttaassyy VViioolleennccee.
Press the GG or button and then use the DD or EE oror button to select block options.
Age (applies to TV-Y, TV-Y7)
Fantasy Violence (applies to TV-Y7)
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
TV Rating General -for USA only
After inputting the password, use the DD or EE or orbutton to choose TTVV RRaattiinngg--GGeenneerraall.
Press the GG or button and then use the DD or EE oror button to select AAggee, DDiiaalloogguuee, LLaanngguuaaggee,
SSeexx or VViioolleennccee.
Press the GG or button and then use the DD or EE oror button to select block options.
Age (applies to TV-G,TV-PG,TV-14,TV-MA)
Dialogue-sexual dialogue (applies to TV-PG,TV-14)
Language-adult language (applies to TV-PG,TV-14,TV-MA)
Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)
Violence (applies to TV-PG,TV-14,TV-MA)
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children G
TV Rating-General
Aux. Block
Downloadable Rating
Age
Fantasy Violence
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General G
Aux. Block
Downloadable Rating
Age
Dialogue
Language
Sex
Violence
2
3
1
2
3
1
1
2
1
2
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
PAR
EN
TAL C
ON
TR
OL / R
AT
ING
79
TV Rating English - for CANADA only
After inputting the password, use the DD or EE or orbutton to choose TTVV RRaattiinngg--EEnnggll iisshh.
Press the GG or button and then use the DD or EE oror button to select EE, CC, CC88++, GG, PPGG, 1144++, 1188++,
or BBlloocckkiinngg OOffff.
E(Exempt)
C(Children)
C8+(Children eight years and older)
G(General programming, suitable for all audiences)
PG(Parental Guidance )
14+(Viewers 14 years and older)
18+(Adult programming)
Blocking Off(Permits all programs)
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.
TV Rating French - for CANADA only
After inputting the password, use the DD or EE or orbutton to choose TTVV RRaattiinngg--FFrreenncchh.
Press the GG or button and then use the DD or EE oror button to select EE, GG, 88 aannss++, 1133 aannss++, 1166 aannss++,
1188 aannss++, or BBlloocckkiinngg OOffff. E(Exempt)
G(General)
8 ans+(General-Not convenient for little children)
13 ans+(Not convenient for children of 13 years and younger)
16 ans+(Not convenient for children of 16 years and younger)
18 ans+(This programs is only for adults)
Blocking Off(Permits all programs)
Press EEXXIITT or RREETTUURRNN button to return to TV viewingor press MMEENNUU button to return to the previous menu.
Based on the ratings, blocks certain TV programs that you
Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
Is the sleep timer set?
Check the power control settings. Power interrupted.
No broadcast on station tuned with Auto off activated.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.
This is normal, the image is muted during the product startup process. Pleasecontact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Check antenna (Change the direction of the antenna).
AP
PE
ND
IX
81
Press the VOL or VOLUME button.
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
Adjust Balance in menu option.
A change in ambient humidity or temperature may result in an unusual noisewhen the product is turned on or off and does not indicate a fault with theproduct.
MAINTENANCEEarly malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
GG If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.
CAUTION
2
1
PRODUCT SPECIFICATIONS
MODELS 32LG500H(32LG500H-UA)
42LG500H(42LG500H-UA)
Dimensions
(Width x Height
x Depth)
Weight
With stand
Without stand
With stand
Without stand
37LG500H(37LG500H-UA)
MODELS 42PG60C(42PG60C-UA)
42PG65C(42PG65C-UA)
Dimensions
(Width x Height
x Depth)
Weight
With stand
Without stand
With stand
Without stand
41.1 x 26.7x 3.1 inches
1044.4 x680.5x 79.6mm
55.1 pounds / 25.0 kg
41.1 x 28.9 x12.1 inches
1044.4 x 735.4 x 308.0 mm
41.1 x 26.7x 4.2 inches
1044.4 x680.5x 107.6mm
61.2 pounds / 27.8 kg
55.1 pounds / 25.0 kg
(Only 42PG65C)
(Only 42PG65C)
32.0 x 23.5 x 8.9 inches
813.8 x 598.8 x 227.3 mm
32.0 x 21.2 x 4.3 inches
813.8 x 540.4 x 111.5 mm
29.9 pounds / 13.6 kg
26.6 pounds / 12.1 kg
40.7 x 28.9 x 11.5 inches
1034.0 x 735.0 x 294.0 mm
40.7 x 26.1 x 4.5 inches
1034.0 x 663.0 x 115.8 mm
48.5 pounds / 22.0 kg
42.9 pounds / 19.5 kg
36.8 x 26.9 x 11.5 inches
936.4 x 685.4 x 293.4 mm
36.8 x 24.1 x 4.4 inches
936.4 x 612.8 x 112.1 mm
40.3 pounds / 18.3 kg
34.3 pounds / 15.6 kg
AP
PE
ND
IX
83
PRODUCT SPECIFICATIONS
The specifications shown above may be changed without prior notice for quality improvement.
40.7 x 29.6 x 11.6 inches1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
Power requirement
Television System
Program Coverage
External Antenna Impedance
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
32LX5DC/S(32LX5DC/S-UA)
32LX50C/S(32LX50C/S-UA)
42PX8DC(42PX8DC-UA)
36.3 x 24.2 x 11.3 inches922.0 x 615.0x 288.0 mm
36.3 x 21.5 x 3.9 inches922.0 x 546.0 x 98.0 mm
39.0 pounds / 17.7 kg
30.4 pounds / 13.8 kg
46.7 x 28.1 x 10.6 inches1186.0 x 714.0 x 270.0 mm
46.7 x 25.7 x 3.9 inches1186.0 x 654.0 x 99.0 mm
72.5 pounds / 32.9 kg
55.6 pounds / 25.2 kg
42LB5DC(42LB5DC-UA)
42LB50C(42LB50C-UA)
40.7 x 29.6 x 11.6 inches1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
AP
PE
ND
IX
84
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
To find out whether your remote control can operate each device without programming, turn on the device(such as a VCR) and press the corresponding mode button on the remote.
After that, press the PPOOWWEERR button. If the device is turned off and it responds properly the remote controlneed not be programmed. If not, the remote should be programmed to operate the device. The program-ming procedures are explained below.
Press the MMEENNUU and MMUUTTEE button continuously at the same time for two seconds; the currently selecteddevice button is illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,you have to repeat from step 2.
Enter the appropriate code from the code table on the following pages. When pressing the button, thelight blinks at a time. If the device turned off, the programming is successful.
Press the MMEENNUU button to store the code. After blinking twice, this code is stored.
Test the remote control functions to see if the device responds properly. If not, steps 2-5.
2
3
4
5
1
Brand Codes Brand Codes Brand Codes
APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN KARDON 027
JVC 012
LG 001 010 016 025
MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
NAD 023
ONKYO 008 017
PANASONIC 003 009
PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015
SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025
Remote Control Code
DVD
AP
PE
ND
IX
85
Brand Codes Brand Codes Brand Codes
AIWA 034
AKAI 016 043 046 124
125 146
AMPRO 072
ANAM 031 033 103
AUDIO DYNAMICS 012 023 039 043
BROKSONIC 035 037 129
CANON 028 031 033
CAPEHART 108
CRAIG 003 040 135
CURTIS MATHES 031 033 041
DAEWOO 005 007 010 064
065 108 110 111
112 116 117 119
DAYTRON 108
DBX 012 023 039 043
DYNATECH 034 053
ELECTROHOME 059
EMERSON 006 017 025 027
029 031 034 035
036 037 046 101
129 131 138 153
FISHER 003 008 009 010
FUNAI 034
GE 031 033 063 072
107 109 144 147
GO VIDEO 132 136
HARMAN KARDON 012 045
HITACHI 004 018 026 034
043 063 137 150
INSTANTREPLAY 031 033
JCL 031 033
JCPENNY 012 013 015 033
040 066 101
JENSEN 043
JVC 012 031 033 043
048 050 055 060
130 150 152
KENWOOD 014 034 039 043
047 048
LG (GOLDSTAR) 001 012 013 020
101 106 114 123
LLOYD 034
LXI 003 009 013 014
017 034 101 106
MAGIN 040
MAGNAVOX 031 033 034 041
067 068012 031 033 067
MARANTZ 069
MARTA 101
MATSUI 027 030
MEI 031 033
MEMOREX 003 010 014 031
033 034 053 072
101 102 134 139
MGA 045 046 059
MINOLTA 013 020
MITSUBISHI 013 020 045 046
049 051 059 061
151
MTC 034 040
MULTITECH 024 034
NEC 012 023 039 043
048
NORDMENDE 043
OPTONICA 053 054
PANASONIC 066 070 074 083
133 140 145
PENTAX 013 020 031 033
063
PHILCO 031 034 067
PHILIPS 031 033 034 054
067 071 101
PILOT 101
PIONEER 013 021 048
PORTLAND 108
PULSAR 072
QUARTZ 011 014
QUASAR 033 066 075 145
RCA 013 020 033 034
040 041 062 063
107 109 140 144
145 147
REALISTIC 003 008 010 014
031 033 034 040
053 054 101
RICO 058
RUNCO 148
SALORA 014
SAMSUNG 032 040 102 104
105 107 109 112
113 115 120 122
125
SANSUI 022 043 048 135
SANYO 003 007 010 014
102 134
SCOTT 017 037 112 129
131
SEARS 003 008 009 010
013 014 017 020
031 042 073 081
101
SHARP 031 054 149
SHINTOM 024
SONY 003 009 031 052
056 057 058 076
077 078 149
SOUNDESIGN 034
STS 013
SYLVANIA 031 033 034 059
067
SYMPHONIC 034
TANDY 010 034
TATUNG 039 043
TEAC 034 039 043
TECHNICS 031 033 070
TEKNIKA 019 031 033 034
101
THOMAS 034
TMK 006
TOSHIBA 008 013 042 047
059 082 112 131
TOTEVISION 040 101
UNITECH 040
VECTOR RESEARCH 012
VICTOR 048
VIDEO CONCEPTS 012 034 046
VIDEOSONIC 040
WARDS 003 013 017 024
031 033 034 040
053 054 131
YAMAHA 012 034 039 043
ZENITH 034 048 056
058 072 080 101
VCR
AP
PE
ND
IX
86
APPENDIX
SET ID
Press the MMEENNUU button and then use DD or EE oror button to select the OOPPTTIIOONN menu.
Press the GG or button and then use DD or EE oror button to select SSeett IIDD.
Press the GG or button and then use DD or EE oror button to adjust SSeett IIDD to choose the
desired TV ID number. The adjustment range of Set IDis 1~99.
Press EEXXIITT or RREETTUURRNN button to return to TV view-ing or press MMEENNUU button to return to the previousmenu.
