CONTENTS
Lift Eye & Beam Testing 04
CFS Site Testing Service 04
Lift Suspension Eye Range 05
System for new concrete structures 06
Systems for existing concrete structures 06
Systems for steelwork applications 07
Lift Structures 08
Drill Fixings for Guide Rails 10
Guide Rail Fitting Systems 11
Channels for fixing to lightweight metal decks 11
RAMPA Inserts 12
Cavity Fixings 12
Cast-in Insert Systems 13
Cast-in Channels and T-Bolts for block & concrete shafts 13
Certifications 14
Quality, innovation, support
These three words are at the heart of everything CFS provides to the construction industry, and remain as true today as when the business was first founded back in 2000 by Tim Chart.
The goal of CFS is to provide an enhanced level of service within the existing market, while always delivering cost-effective, technically brilliant solutions that resolve any application problem. Making this goal a reality is only possible through the drive, passion and commitment of the whole CFS team, who for over a decade have held the company’s philosophy true:
Analysis – Discussion – Action – Result
Quality products you can trust
Ideally suited to concrete, steel or composite structures, the highly innovative CFS product range includes cast-in inserts, post-fix solutions, facia panels, guide rail systems and lift structures to meet your lift requirements.
The company is always pushing to develop new products to meet the needs of a forward moving industry. Product quality is also key to CFS’ continued success, which is why the company is proud to be ISO 9001 certified.
Testing and technical support
CFS is a member of the LEEA Association (Lifting Equipment Engineers Association) and fully understands the importance of on-site testing for both safety reasons and for peace of mind. CFS can also provide rapid technical backup for the many products provided, while full AutoCAD drawing services are available. Furthermore, CFS has the services of qualified engineers to assist with all projects.
Recent CFS projects include:
• The Shard - London
• Leadenhall Building - London
• Centenary Quay - Southamptone: [email protected]
t: +44 (0) 1491 578166
f: +44 (0) 1491 578166
www.cfsfixings.com
INTRODUCTION
LIFT PRODUCT RANGE
LIFT EYE & BEAM TESTING LIFT SUSPENSION EYE RANGE
SYSTEMS FOR NEW CONCRETE STRUCTURES
• CFS provides a comprehensive site and laboratory testing service and we can load test up to 10,0T
• Test certificates are provided
• We offer a rapid response time
• Tests are conducted by means of tensioned chain to the lift pit or from the top of the slab accessed through door openings
• All operatives have CSCS cards and will liaise carefully with the contractor to establish the most suitable test method
• Method statements and risk assessments are carried out for each project and provided on request
• Members of LEEA
• CFS can test resin bolts, through bolts, cast-in channels and all types of drilled and cast-in fixing
• Members of LEEA
Cast in rotating eye when tested with bridge
Resin Bolt tested With Tension Tester Channel Tension Tester
Bolt on beam rotating eye when tested with chain
Site Testing Service
For Guide Rail Fixings
Cast-in Inserts
Applications for use with Cast-in Inserts
CFS SITE TESTING SERVICE
CFS lift suspension eye systems offer optimum solutions for both new build & modernisation projects.
They have been designed to provide the best technical solution for fixing to concrete or steel structures. CFS has used its extensive knowledge of
concrete insert design to provide a safe and easy to use cast in product for the contractor.
For existing concrete slabs, we have options for drilling through or fixing to the slab soffit. We can offer fixed, rotating and fold flat versions of eyes
– ideal where headroom is tight.
With steel structures we can design and supply the supporting steel structure, with eyes that are specifically designed for welding to steelwork or can be post fixed by drilling to steel beams.
Crown Foot Anchor
• Requires no additional reinforcement
• Quick and easy to use
• Available in load capacities 1.2T to 4.0T
Cast-in Socket
• Requires site applied reinforcement
• Available in load capacities 1.2T to 12.5T
All types of Eye can be used with Crown Foot or Cast-in Socket Anchors
Rotating Type with Socket
Non-Rotating Type with Socket
Non-Rotating Type with Crown Foot Anchor
Rotating Type with Crown Foot Anchor
Suspension Eye Selection Chart
Load Group
Thread Diameter Min Slab Thickness
Crown Foot Anchor
Socket Insert
Rotating Eye (RE)
Non-rotating Eye (NR)
2.0T 20mm 130mm CRA-20-100 LS-20 RE-20 NR-20
2.5T 24mm 150mm CRA-24-115 LS-24 RE-24 NR-40
4.0T 30mm 200mm CRA-30-150 LS-30 RE-30 NR-40
Other sizes available on request
54 01491 576 466 | [email protected] www.cfsfixings.com
Combi-Anchor complete with Spreader Plate
Load Group Socket Thread Diameter
Combi Anchor C/W Spreader Plate
Non-rotating Eye
Rotating Eye Hole to drill through slab ‘W’
Threaded Bar Diameter
2.0T 20mm CASP-20 *_Length (H) NR-20 RE-20 30 Ø – 16mm
2.5T 24mm CASP-24 *_Length (H) NR-24 RE-24 37 Ø – 20mm
4.0T 30mm CASP-30 *_Length (H) NR-30 RE-30 42 Ø – 24mm
Combi-Anchor complete with spreader plate for fixing through existing slabs for use with rotating & non-rotating Eyes. Existing Slab Core Drilled to Suit.
Stud Bearing Plate for use with existing slabs
Beams can be supplied to suit your load criteria and fixing details
Rotating Eye for fixing through slabs
Rotating Eye for fixing to underside of slabs
Non-Rotating Eye for fixing through slabs
Folding Eye for fixing to underside of slabs
For use with Non-rotating eyes please specify slab thickness ‘H’ available in load groups 2T, 2.5T and 4T
CASP +REXX - CI CASP +NR
WRE - 20 - PC2T Eye fixed with M12 Through Bolts
WRE - 40 - PC 4T Eye fixed with M16 Through Bolts
VLBS-20-PC2T Eye fixed with M12 Through Bolts
VLBS-40-PC 4T Eye fixed with M16 Through Bolts
Please specify slab thickness
Steel Beams with Pre-fixed Lift Suspension Eyes
Please specify eye positions and overall length of beam to ensure adequate bearing on your block or brick walls. For Folding Eyes specify the direction of fold. CFS can advise on beam sizes.
Non-rotating Eye ‘Folding’ Type ‘FE’
• Excellent load transmission to the existing structure
• Folds flat, ideal for restricted height applications
• Incorporates a ‘bump’ stop to ensure the eye can only fold one way. Enables easy hooking into the eye by operatives
Eye Type NR Folding Non-Rotating Welded
Eye Type WRE Rotating
O/A length
The Rotating Eye ’For Welding Type ‘WRE’
• Gives excellent load distribution to the existing steel work
• Easy to place accurately
• Rotates to align with force direction
Load Group Welded Rotating Eye
Welded Folding Eye
Bolted Rotating Eye
Bolted Non- Rotating Eye
Bolted Folding Eye
UP TO 2.5T WRE-20 VLBS-20-PC WRE-20-BO NRBE-25 VLBS-20-BO
2.5T 24mm 150mm CRA-24-115 LS-24 NR-40
1 2 1. Rotating eye with packer plate bolted to beam.
2. Non-rotating eye for bolting to steel beams. Type NRBE. Please specify beam size.
Fixed on Angle Cleats in Concrete Shafts
Eyes Can Be Pre-fixed to Beams On-site
Bearing on Block Walls
76 01491 576 466 | [email protected] www.cfsfixings.com
SYSTEMS FOR EXISTING CONCRETE STRUCTURES SYSTEMS FOR STEELWORK APPLICATIONS
For use in timber or other buildings where lift loads are to be taken independently from the main building structure.
Erected by CFS personnel.
Complete with lifting beams and tested lifting eyes.
• Available for structures 2 stories to 8 stories
• Guide rails fitted to rear are not shown
• CFS produce dedicated AutoCAD drawings for each project.
CFS DIVIDER SCREENS
• Manufactured to BS EN ISO 13857 : 2008 & EN81-1/2
• Mesh Screens for protection
• Available painted or galvanised
• Manufactured to suit your project’s specific dimensions
• Installed by CFS quality trained personnel
Triple Channel Assembly to suit your beam configuration.
Divider Steels, False Pit Platforms, Door Frames, Runway motor room beam
CFS FACIA PANELS
• Manufactured to EN81-1/2
• Supplied in galvanised sheet
• Sized for your specific project
• Installed by CFS quality trained personnel
CFS COUNTER WEIGHTS
• Manufactured to suit your drawings
LIFT STRUCTURES
FREESTANDING, RESTRAINED STRUCTURES
98 01491 576 466 | [email protected] www.cfsfixings.com
1110 01491 576 466 | [email protected] www.cfsfixings.com
Together with Fischer UK, CFS have developed a wide range of post drilled fixings, providing high quality products with excellent technical support.
We have products to suit concrete, block and brick structures, available from stock on a rapid delivery service.
HSS Cobalt Drill Bits for metal
HSS Cobalt Drill Bits for metal
HSS Cobalt Drill Bits for metal
Part No. Resin Pack Size Application
94405 FIS V 360 S 6 For resin anchor studs
58000 FIS AM GUN 1 Applicator gun
48980 14-22 Brush 2 Drilled hole cleaning item
61223 FIS S NOZZLES 10 Drilled hole
cleaning item
Part No. TL Resin Studs Pack Size Application Concrete Dense Block Brickwork
90283 TL RESIN STUD M12 10 Stud for use with resin • • •
Part No. CFS S-Fix Pack Size Application Concrete Dense Block Brickwork
M12 S-FIX M16 S-FIX
M12 S-FIX M16 S-FIX
1 For block rapid fixing •
Part No. FBN II Through Bolt Pack Size Application Concrete Dense Block Brickwork
44558 M12 x 115mm 20 Bolt for concrete wall •
DRILL FIXINGS FOR GUIDE RAILS GUIDE RAIL FITTING SYSTEMS
CHANNELS FOR FIXING TO LIGHTWEIGHT METAL DECK FLOORS
c
a
b
c
a
b
Available in mild steel for welding to steelwork. 40/25 & 49/30 sections available, maximum length 3050mm
Plain back Channels
CHPB 40 (40/25)
CHPB 50 (49/30)
Triple Channel Assemblies Typical Length
TCH 40 (40/25) 550, 800, 1100, 1300 max 3000mm
TCH 50 (49/30) 550, 800, 1100, 1300 max 3000mm
CFS provides a channel incorporated within a metal edge trim profile. There is no need to worry about the uncertainty of fixing to the edge of this lightweight flooring system. Please specify floor height, return leg length and channel size.
Typical installation showing Met stop shot fired or tek- screwed down to the steel frame. Restraint straps are provided to give additional restraint to the upper edge.
c
a
b
c
a
b
CFS Met Stop 40 (40/25)
CFS Met Stop 50 (49/30)
Plain back Channels for Welding to Steel Structures
Triple Channel Assembly for welding to steel frames
CFS Type PBB
1312 01491 576 466 | [email protected] www.cfsfixings.com
Cavity Fixings
RAMPA Inserts
Part No. D L d d1 d2 L2 L3 h
RAMPA12 22 80 M12 17 15 25 30 5
22 100 M12 17 15 25 30 5
RAMPA16 25 80 M16 20 18 25 30 5
25 100 M16 20 18 25 30 5
Bolt Size Hole Diameter Thickness Anchor Clearance
Depth Clearance Min Hole Centres
Min Max
M8 x 50 9 9 24 19 25 20
M10 x 60 11 10 30 23 30 20
M10 x 130 11 55 100 23 30 20
M12 x 70 13 12 35 26 35 25
M12 x 120 13 30 85 26 35 25
M12 x 180 13 80 140 26 35 25
M16 x 90 17 13 43 36 43 35
M16 x 130 17 40 75 36 43 35
M16 x 180 17 55 125 36 43 35
M20 x 110 22 21 56 44 56 48
M20 x 140 22 51 86 44 56 48
M20 x 160 22 65 100 44 56 48
M20 x 180 22 80 120 44 56 48
M20 x 250 22 130 185 44 59 48
Insert Size M12 M16
Drill hole diameter in timber d1 =mm 18 21
Minimum screw-in depth in the insert Lmin = mm 12 16
M6 to M36 BZP Grade 8.8 or higher. Lengths 30-100mm. S/S Grade A2 or A4
Hexagonal Full Nut
Nylock Nut Half Nut Washer Spring Plate Washer
• The simple solution to cavity fixing
• Fixing into a girder cavity or box section available
• Ideally suited for safe, quick and easy installation
BZP and S/S Fixings
Part No. Tension Load Capacity per bolt per 250mm
Shear Load Capacity per bolt per 250mm
Typical Available Lengths (mm)
40/25 CH 8.0kN 10.kN 150, 350, 1050, 2300
49/30 CH 12.50kN 15.0kN 200, 250, 550, 800, 1300, 1550 upto 3050
Part No. Finish
40/25 TB M12 x 50 M16 x 60
M12 x 60 M12 x 60
M12 x 80 M16 x 80
Galvanised
49/30 TB M16 x 50 M20 x 60
M16 x 60 M20 x 100
M16 x 80 Galvanised
Typically for Guide Rail and Door Fixing
Channel Insert Technical DataTypical Guide Rail Fixing in a Concrete Shaft
T-bolts to suit Channels
‘Back to back’ Angles
Guide Rail
‘Clip’ Clamp
Insert
CAST-IN INSERT SYSTEMS
Part No. 40/25 Cast-in-channel
CH40-200 40/25 HDG Channel 200mm
CH40-550 40/25 HDG Channel 550mm
CH40-800 40/25 HDG Channel 800mm
CH40-1050 40/25 HDG Channel 1050mm
CH40-1300 40/25 HDG Channel 1300mm
CH40-1550 40/25 HDG Channel 1550mm
CH40-1800 40/25 HDG Channel 1800mm
Part No. T Bolts 40/25
TB40-12-50 40/25 M12 x 50
TB40-12-80 40/25 M12 x 80
TB40-12-100 40/25 M12 x 100
TB40-16-50 40/25 M16 x 50
TB40-16-80 40/25 M16 x 80
TB40-16-100 40/25 M16 x 100
Part No. 49/30 Cast-in-channel
CH49-200 49/30 HDG Channel 200mm
CH49-550 49/30 HDG Channel 550mm
CH49-800 49/30 HDG Channel 800mm
CH49-1050 49/30 HDG Channel 1050mm
CH49-1300 49/30 HDG Channel 1300mm
CH49-1550 49/30 HDG Channel 1550mm
CH49-1800 49/30 HDG Channel 1800mm
Part No. T Bolts 50/30
TB50-16-50 50/30 M16 x 50
TB50-16-80 50/30 M16 x 80
TB50-16-100 50/30 M16 x 100
Cast-in channels and T-Bolts for block & concrete shafts
L
Dd1
d d2
L3
L2
h
Suspension Eyes in top of slab
Lift suspension eye fixing to steel beam
Cast-in Channel Insert for Guide Rail fixing
Insert for door fixing
Alternative insert for block work wall
S-Fix drill fixings for guide rails
SA lift eye load testing
1514 01491 576 466 | [email protected] www.cfsfixings.com
For more information on our Lift Product range or to see other services CFS
can offer, please visit
www.cfsfixings.com
CERTIFICATIONS CFS LIFT PRODUCTSIdeally suited to architectural and civil engineering
concrete, the highly innovative CFS range includes products suitable for lift installation on precast concrete, cast stone, lifts and elevators, glass façades and brick and natural stone.
The company is forever pushing to develop new innovations that will meet the needs of a rapidly evolving industry. With outstanding quality being a key attribute to our continued success, CFS is also proud to be ISO 9001 certified.
Construction Fixing Systems Limited
Unit 2A, Westfield Estate Henley Road, Medmenham Marlow, Buckinghamshire SL7 2TA
t: +44 (0) 1491 576466
f: +44 (0) 1491 578166
www.cfsfixings.com
LIFT
PR
OD
UC
TS_1
1.17