SWIVEL LIFT BSL 350
Lift systems
11.2016
Swivelling 2 x 90°
AMF-Bruns GmbH & Co. KG I Hauptstraße 101 I 26689 ApenTelefon +49 (0) 44 89 / 72 72 50 I Fax +49 (0) 44 89 / 62 45
www.amf-bruns.de
AMF-BRUNS SWIVEL LIFT BSL 350
» The BSL 350 is operating successfully in innumerable vehicles in Germany and abroad for more than 30 years now
» Lift can be swivelled 2 x 90°
» Platform can be accessed directly from pavement
» Minimum space requirement behind the vehicle. Easy to swivel in and out even under narrow traffic conditions
» Lifting and lowering operations are carried out averted to the vehicle’s rear edge to prevent foot entrapment
» Due to its compact construction, the BSL 350 does only need minimum space in the passenger cabin whilst in non-operating state
» Two roll-off stops and handrails ensure safe lifting and lowering operation » Robust, bearing-supported lifting unit; absolutely maintenance-free as well as weather-proof for maximum life-time
» An additional lift locking device at the vehicle floor ensures rattle-free driving
» Manual pump for emergency operation
» Hydraulic power pack integrated in lifting unit: - No additional space loss in the passenger cabin
- Easy to install
» Meets EN 1756, II requirements
» Compatible with EMC in accordance with the EU legislation
THESE FACTS MAKE ALL THE DIFFERENCE
TECHNICAL DATA
» SWL 350 kg
» Platform size Approx. 950 x 1.200 mm
» Unladen weight Approx. 150 kg
» Lifting time Approx. 10 sec
» Lowering time Approx. 8 sec
» Control By push buttons
» Lowering operation By unladen weight
» Lifting operation Hydraulic power pack
» Power Electro-hydraulic from battery, 12V; strong, low-noise power pack integrated in lifting unit
» Swivel devices Dust-proof enclosed; splash-proof; with roller bearings and permanently lubricated
» Lifting unit Maintenance-free roller guides – no sliding friction!
Swivel lift folded back in a space-saving way. Lowered lift, ready for wheelchair access.The AMF-Bruns swivel lift BSL 350 in lifting operation.
Swivelling 2 x 90°