Introduction If you are involved in the lifting industry sector from design, manufacture, refurbishment and repair through to the hire, maintenance and use of lifting equipment then you must ensure that the lifting equipment is safe for use. The Lifting Equipment Engineering Association (LEEA) has played a key role within the lifting industry worldwide, from training and standards setting through to health and safety, the provision of technical and legal and advice and the development of examination and licensing systems. This flyer provides information relating to local and international regulations as provided by LEEA and in accordance with Lifting operation and Lifting Equipment Regulation 1998 (LOLER). How often must lifting equipment and accessories be thoroughly examined and certification? FOR ALL YOUR INSPECTION NEEDS LIFTING EQUIPMENT THOROUGH EXAMINATION AND CERTIFICATION What is thorough examination? This is a systematic and detailed examination of the equipment and safety-critical parts, carried out at specified intervals by a competent person who must then complete a written report. (Lifting Operation and Lifting Equipment Regulations 1998 (LOLER) Before using it for first time After assembly and before use at each location Regularly, while in service: - 6 months, for lifting equipment and any associated accessories used to lift people - 6 months for all lifting accessories - 12 months for all other lifting equipment Following exceptional circumstances Before using it for first time Relocation After Major repair No using in 6 month - 6 months, for crane lifting accessiones yearly internal > 3 ton > 50 ton - 3 months > 50 ton - 12 months < 3 ton Crane Law LEEA
Transcript
Introduction If you are involved in the lifting industry sector from design, manufacture, refurbishment and repair through
to the hire, maintenance and use of lifting equipment then you must ensure that the lifting equipment is safe for use.
The Lifting Equipment Engineering Association (LEEA) has played a key role within the lifting industry worldwide, from
training and standards setting through to health and safety, the provision of technical and legal and advice and the
development of examination and licensing systems. This flyer provides information relating to local and international
regulations as provided by LEEA and in accordance with Lifting operation and Lifting Equipment Regulation 1998
(LOLER).
How often must lifting equipment and accessories be thoroughly examined and certi�cation?
FOR ALL YOUR INSPECTION NEEDS
LIFTING EQUIPMENT THOROUGHEXAMINATION AND CERTIFICATION
What is thorough examination?This is a systematic and detailed examination of the equipment and safety-critical parts, carried out at
specified intervals by a competent person who must then complete a written report.
(Lifting Operation and Lifting Equipment Regulations 1998 (LOLER)
Before using it for first time
After assembly and before use at each location
Regularly, while in service:
- 6 months, for lifting equipment
and any associated accessories used to lift people
- 6 months for all lifting accessories
- 12 months for all other lifting equipment
Following exceptional circumstances
Before using it for first time
Relocation
After Major repair
No using in 6 month
- 6 months, for crane lifting accessiones yearly internal
> 3 ton > 50 ton
- 3 months > 50 ton
- 12 months < 3 ton
Crane LawLEEA
Visual examination
Function checks
Measurements of wear by specific tools
Traditional NDT (non-destructive testing MT,PT,UT,RT,VT,ET,ACFM)
Load test
Lifting Appliances
What is covered by a thorough examination of lifting equipment and load test?This depends on the professional judgement of the competent person undertaking the examination,
but needs to include all matters which affect the safety of the lifting equipment,
including likely deterioration with time. Methods used include :
Our scope is very wide and includes a range of equipment. There are two main categories as below
Lifting Appliances mean work equipment for lifting and lowering loads.
The definition includes attachments used to anchor, fix or support the equipment.
Lifting Accessories mean lifting tools for attaching loads to machinery for lifting.
Thorough Examination check list report
Certificate of thorough examination in accordance with LEEA membership
Por Jor 1&2 (ปจ 1&2 ) In accordance with Thai Regulation By Thai professional engineer
Extend Performance and lifetime
Save Money
Ensure safety and Availability
Minimize Risk.
Reporting and Certi�cation
Your Business bene�t
Visual inspection with supplementary NDT
Measurement of wear
Function test
Load test
Lifting Accessories
What equipment is covered by Dacon Inspection-Services?
Lifting Appliances
Lifting Accessories
- Stationary Crane
- Soft sling
- Manual hoist- Air operated hoist- Electrical hoist- Telehandler and industrial lift truck- Scissor Lift- Cargo Lift- Moblie Crane
