Lifting solution specialists
2 | 3
A powerful partnership
2|3 A powerful partnership4|5 Made in Germany6|7 References08|09|10|11 The hoisting and crane technology12|13 Explosion-protected crane technology14|15 Natural gas liquefaction industry
Crane Systems Australia is a proudly Australian owned and operated engineering company specialising in overhead crane design, manufacture, installation, maintenance and repairs. Partnering with STAHL CraneSystems, Germany, we can offer the most comprehensive range of hoist technology and crane compo nents in the world today.
�� Electric wire rope hoists ranging from 500 kg to 160,000 kg�� Electric chain hoists ranging from 250 kg to 6,300 kg�� ATEX/IECEx Explosion Resistant hoists and crane components�� Single and double girder bridge cranes�� Full and semi portal cranes�� Jib cranes and monorail systems�� Condition monitoring systems�� Spare parts�� Preventative maintenance�� Upgrades and overhauls�� Major assessments and third party inspections�� Operator training
Our goal is customer satisfaction focusing on high productivity, efficiency and profitability for your business from our engineered lifting solutions. With an extensive range of products and services as well as many years of experience, Crane Systems Australia’s team will provide you with an effective solution to suite your materials handling requirements no matter the size.
4 | 5
Company founded by Rafael Stahl
1876 1903 1922 1953 20121998
The first electric chain hoist with round link chain is developed.
First electric hoist with wire rope and drum SC range of chain hoists
SH range of wire rope hoists
World innovation: first explosion-
protected flameproof enclosed electric
wire rope hoist
Full IECEx-certification of the portfolio for Zone 1, Zone 2, Zone 21 and Zone 22.
Made in Germany – 140 years of expertise
STAHL CraneSystems, Germany, ranks internationally among the leading manufacturers of hoisting technology and crane components and has the most extensive complete product portfolio. Throughout the world, STAHL CraneSystems is regarded as the specialist where explosionprotected crane technology is concerned. Every product stands out for its uncompromising quality, high reliability and maximum performance. The products meet all national and international directives and laws.
2011
8 | 9 | 10 | 11
Radio remote control units CPS control pendant
Overload cut-off Travel limit switch for ›cross/long travel‹
Load display
Emergency hoist limit switch (gear limit switch)
Signal transmittersSMC MulticontrollerElectrical crane components
Endcarriages for underhung cranes
Endcarriages for overhead travelling cranesFrequency inverter for ›Hoist‹ and for ›Cross/long travel‹
Crane travel drives
Explosion-protected crane travel drives
ST chain hoistSTK chain hoistSC chain hoist
STD dual chain hoist
STD VarioSH wire rope hoistAS 7 wire rope hoist
SW winch
The hoisting technology
The control technology
The hoisting and crane technology
Crane Systems Australia builds and erects highquality crane systems for the most varied requirements. Everything is possible, from simple workplace solutions to interconnecting systems to complex automation. For these projects we employ STAHL CraneSystems’ top quality hoisting technology and crane compo nents. However our indepth technical consulting comes before building and erecting your crane system. Construction and erection are dimensionally accurate and delivered on schedule. And even after erection and commissioning you have the compre hensive support of our customised After Sales Services.
The drive technology
As regards technology and costeffectiveness, the highquality hoists and crane components from STAHL CraneSystems rank among premium products throughout the world. All components mesh like precisely engineered gear wheels and work together efficiently. Nearly all components and systems are also available in explosionprotected design complying with ATEX and IECEx. The ST and SC chain hoist programmes from STAHL CraneSystems rank among the most distinctive and comprehensive on offer in the world. The robust classic ST proves itself in operation day by day in the safe working load range from 125 kg to 6,300 kg. The SC chain hoist supplements the ST chain hoist programme and will convince you with its technically mature design, one of the most uptodate available at present. It is available in five variants in the safe working load range from 6 kg to 5,000 kg. STAHL CraneSystems’ SH and AS 7 wire rope hoist programmes and the SW winch programme are reliable, highperformance, longlived and largely maintenancefree. The adaptable SH wire rope hoists are employed in the safe working load range from 500 kg to 25,000 kg. The upper safe working load range from 125,000 kg is covered by the AS 7 wire rope hoists. The SW winch programme extends the range of appli cations into the heavy lifting field up to 250,000 kg. Numerous other electrical and mechanical crane components from STAHL CraneSystems increase safety in material transport and extend the service life of your crane system.
12 |13
When the safety of humans and machines in hazardous areas is at stake, Crane Systems Australia’s experts use explosionprotected compo nents from STAHL CraneSystems. STAHL CraneSystems occupies an exceptional position in this specialist field thanks to its many decades of experience and expertise, its own fundamental research and development, and approvals from the Federal PhysicoTechnical Institute (PTB) and other test centres in many countries around the world. These hoisting technology and crane components rank among the safest technology on the market. The rigorous ATEX directives and IECEx regulations on mechanical and electrical explo sion protection are of course met. Explosionprotection is a sensitive subject. This is why you should draw on our experience in this area. A number of the crane systems we have installed are explo sionprotected customised solutions, working reliably day after day.
SH wire rope hoist for Zone 1, certified in acc. with ATEX and IECEx
STex chain hoist
Explosion-protected winch
Explosion-protected crane technology
�� Internationally leading specialist for explosion protection technology�� One of the world’s most compre
hensive product portfolios for Zone 1, Zone 2, Zone 21 and Zone 22�� All additional equipment available
in explosionprotected design�� Design and maintenance to ATEX and
IECEx in certified quality
Use Category Protection against Explosion protection class
Zone 1 Ex II 2 G Gas Ex de IIB T4 Gb or Ex de IIC T4 Gb
Zone 2 * Ex II 3 G Gas Ex de nA IIB T3 (T4) Gc or Ex de nA IIC T3 (T4) Gc
Zone 21 Ex II 2 D Dust Ex tb IIIC T 120 °C Db
Zone 22 Ex II 3 D Dust Ex tc IIIC T 120 °C Dc
The facts
* Available for wire rope hoists only
14 |15
Natural gas liquefaction industry
�� All safety level available�� LNG wire rope hoist in safety level 3B
is the safest on the market�� Constructed from fieldproven series
components�� Reliable, highperformance, low
maintenance, mechanism classified in acc. with FEM�� Offstandard equipment for use in
LNG plants�� Approvals in compliance with
ATEX and IECEx
There is a challenging industry behind natural gas liquefaction plants. Working with inflammable gas is susceptible to risks and may lead to accidents entailing high costs. For this reason we use hoisting tech nology from STAHL CraneSystems for all fields of LNG tech nology. Only in this way is everything optimally coordinated and continuous per for mance, long service life and high efficiency guaranteed.
STAHL CraneSystems’ LNG hoists are specifically designed for main tenance work in natural gas liquefaction plants (LNG) and certified in acc. with the strict ATEX directives and IECEx regulations. Thanks to their highquality components and robust design they are optimally suited for use in coastal areas with challenging climate conditions.
The range of LNG wire rope hoists extends from explosionprotected standard LNG wire rope hoists in safety level 1 for daytoday maintenance work, to LNG wire rope hoists with two rope drums in safety level 2, to the doubly safeguarded LNG wire rope hoists in safety level 3A and 3B guaranteeing a maximum of safety. Thanks to the redundant design and rocking suspension, STAHL CraneSystems’ LNG wire rope hoists in safety level 3B are considered to be the safest hoists on the international market available at present.
Level 1 Level 2 Level 3A Level 3B
Rope drums Ropes Hoist gear Reeving Rocking suspension
Level 1 1 1 1 1/1 –
Level 2 2 2 1 1/1 –
Level 3A 2 2 2 1/1 –
Level 3B 2 2 2 1/1
STAHL CraneSystems offers suitable wire rope hoists for all safety level
The facts
www.cranesystems.com.au
Crane Systems Australia Pty. Ltd. 17–19 Industrial Avenue, Thomastown, VIC 3074 Phone: +61 3 9091 0350, Fax: +61 3 9091 [email protected]
STAHL CraneSystems GmbH Daimlerstr. 6, 74653 Künzelsau, Germany Tel +49 7940 1280, Fax +49 7940 [email protected]