Liftstar Heavy Hydraulic Winches2,000 - 5,000 kg (4,400 - 11,000 lb)
Gearbox-in-drum design reduces size and helps the winch fit in compact applications
Rugged cast steel construction delivers long-life and durability
Minimum 18:1 drum diameter to wire rope diameter
Lever control allows for precise positioning
Hydraulic motor offers high torque and high efficiency at low motor speed
Accu-Spool with wire rope installed option
Skid Frame option
Ideal for:
Onshore Offshore Marine
Liftstar Heavy Hydraulic Winches2,000 - 5,000 kg (4,400 - 11,000 lb)
Ingersoll Rand heavy hydraulic Liftstar winches are designed for just about any lifting application you can throw at them. They feature reliable hydraulic motors for capacities up to 5,000 kg. They can be mounted on a rigid support and operate in any position provided the drum is horizontal. With enclosed gear boxes for protection and cast iron and steel construction for durability, Liftstar heavy hydraulic winches will keep your production operating for years.
B
A
790(31.1)
560(22.05)
825
(32.
48)
20(0
.79)
934(36.77)
21 (0.83)
21 (0.83)95(3.74)
680
(26.
77)
363
(14.
49)
350
(13.
78)
Models Amm (in)
Bmm (in)
Cmm (in)
LS5000H75-L 355 (13.98) 650 (25.59) 934 (36.77)
LS5000H75GC-L 728 (28.66) 1,023 (40.28) 1,307 (51.46)
Bolt Pattern
Rope Entry
Rope E
ntry
460
(18.
11)
D
LIFSTAR HYDRAULIC WINCH
LS5000H75-L
934(36.77)
260
(10.
23)
B
95(3.74)
20(0
.79)
Ø21 (0.83)
~825
(32.
48)
Ø36
8(Ø
14.4
9)
Ø68
0(Ø
26.7
7)
350
(13.
78)
A
560(22.05)
~790(31.1)
60(2.36)
18(0.71)
B
454
(17.
87)
340
(13.
39)
227
(8.9
4)
227(8.94)
C
AD
500(19.67)
725
(28.
54)
12(0
.47)
273
(10.
75)
Bolt Pattern
Ø27
3(1
0.75
)
340
(13.
39)
DLIFSTAR HYDRAULIC
WINCHLS2000H30-L
60(2.36)
A
Ø45
4(1
7.87
) 227
(8.9
4)
C
B
Rope E
ntry
Rope Entry
500(19.67)12
(0.4
7)Ø18 (0.71)
~725
(28.
54)
Models# of
Bolt HolesD
mm (in)
LS2000H30-L 4 449 (17.68)
LS2000H30GC-L 4 634 (24.96)
Models Amm (in)
Bmm (in)
Cmm (in)
LS2000H30-L 300 (11.81) 509 (20.04) 732 (28.82)
LS2000H30GC-L 485 (19.09) 694 (27.32) 917 (36.10)
Models# of
Bolt HolesD
mm (in)
LS5000H75-L 8 580 (22.83)
LS5000H75GC-L 8 953 (37.52)
(1) Recommended minimum breaking force of wire rope based on top layer line pull rating.(2) Drum Capacity is based on tightly wound wire rope and 1/2" freeboad from the top of the flange to the top layer. Recommended drum working capacity is
80% of values shown.(3) Max storage capacity is tightly wound with no freeboard.
Grooved Drum and Press Roller
Automatic spooling device
Optional pendant
General Characteristics. Performance based on 150 bar (2,180 psi) inlet pressure
Model
Motor Displacement
cm3/rev (in3/rev)
Max Flow with Rated Load
L/min (gal/min)
Operating Pressure
bar (psi)
Drum Torque
N-m (lb-ft)
Net Weight
kg (lb)
LS2000H30-L 30 (1.80) 65 (17.2) 150 (2,180) 3,610 (2,662) 300 (661)
LS2000H30GC-L 30 (1.80) 65 (17.2) 150 (2,180) 3,610 (2,662) 353 (778)
LS5000H75-L 75 (4.60) 142 (37.5) 150 (2,180) 12,700 (9,367) 730 (1,609)
LS5000H75GC-L 75 (4.60) 142 (37.5) 150 (2,180) 12,700 (9,367) 987 (2,176)
General Performance. Performance is based 5:1 design factor.
Model
Line Pull Capacity Line Speed
First Layer kg (lb)
Mid Drumkg (lb)
Top Layer kg (lb)
First Layer m/min (fpm)
Mid Drumm/min (fpm)
Top Layer m/min (fpm)
LS2000H30-L 2,800 (6,200) 2,400 (5,300) 2,000 (4,400) 22 (72) 26 (85) 30 (98)
LS2000H30GC-L 2,800 (6,200) 2,400 (5,300) 2,000 (4,400) 22 (72) 26 (85) 30 (98)
LS5000H75-L 6,500 (14,330) 5,750 (12,665) 5,000 (11,000) 22 (72) 26 (85) 30 (98)
LS5000H75GC-L 6,500 (14,330) 5,750 (12,665) 5,000 (11,000) 22 (72) 26 (85) 30 (98)
Drum Capacity
Minimum Rope Breaking Force(1)
Recommended Rope Diameter
Drum Capacity per Layer(2)
m (ft)Max. Rope
Storage Capacity (3)
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5Model kN (lbs) mm (in) m (ft)
LS2000H30-L 98 (22,000) 13 (1/2) 17 (56) 36 (118) 57 (187) 79 (259) 103 (338) 156 (512)
LS2000H30GC-L 98 (22,000) 13 (1/2) 29 (95) 61 (200) 96 (314) 134 (439) 174 (570) 313 (1,026)
LS5000H75-L 245 (55,000) 20 (3/4) 20 (66) 42 (138) 66 (217) 92 (302) 120 (394) 219 (718)
LS5000H75GC-L 245 (55,000) 20 (3/4) 42 (138) 88 (289) 138 (453) 193 (633) 252 (827) 463 (1,519)Dimensions shown are mm. Dimensions in Brackets [ ] are inches. Dimensions are subject to change. Contact factory for certified drawings.
For More Information www.ingersollrandproducts.com/lifting [email protected]
www.ingersollrandproducts.com © 2015 Ingersoll Rand IRITS-0615-077
Ingersoll Rand, IR, the IR logo and Impactool are trademarks of Ingersoll Rand, its subsidiaries and/or affiliates. All other trademarks are the property of their respective owners. Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll Rand’s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation. Unless otherwise noted this equipment is not designed for transporting people or lifting loads over people. It is the user’s responsibility to determine the suitability of this product for any particular use and to check compliance with applicable regulations. Before installation, see maintenance and operations manual for additional warnings and precautions.
How to Order
Motor Displacement30 30 cm3
75 75 cm3
DrumNo letter StandardGC Long drum
Control typeL Direct lever
controlDPxxM Full flow remote
controlJCxxM Full flow remote
control
xxM Specify hose length needed in meter
OptionsCM Low temperature design (-20°C). G Drum guardK Skid frameL Automatic spooling deviceM Material traceability certificates as per
EN 10204 3.1 on main load bearing parts.P Marine paint finish.QZ Offshore paint including sandblasting.R Press rollerU Emergency stop on “JC” Joystick Control
station (On Heavy LS and PS only)W1 ABS witness test.W2 DNV witness test.W3 LRS witness test.W4 Client witness of load test.
5000H 75 GC L GQZ
Model SeriesLS Liftstar
Capacity2000H 2,000 kg5000H 5,000 kg
LS - -
• Design for custom capacities• Custom control systems• Custom product modifications• Witness testing and complete certification
to most global standards
Special OrdersA significant portion of our business is providing customized solutions for specific applications. We recognize that not all jobs are created equal and that the most cost-effective solutions may not be in an off-the-shelf item. We’ve designed and manufactured winches and hoists for applications as simple as moving bags of lettuce, to as intricate as installing critical payloads on space vehicles, including high capacity loads 100 tons and above.
• Full data package with CAD drawings• Dedicated project management for your
project from conception to delivery• Onsite services available including presale and evaluation