Light controls for performance contracting

01 | Help your project achieve Net Zero energy

02 | Save time and money, and reduce lifecycle costs

04 | Why Lutron?

06 | More than 50 years of innovative, energy-saving solutions

Lutron integrated light control retrofits deliver energy savings and long-term value to projects.

As part of its quest to bring all buildings to Net Zero energy, The Rocky Mountain Institute in conjunction with the Government Services Administration (GSA) defines deep energy retrofits as a whole-system approach that reduces building energy by over 50%. By implementing Lutron® light control strategies to reduce overall energy use by up to 23%1, buildings can get halfway to their deep energy goal.

Win more Net Zero projects by integrating light control in your proposals.

• Help meet EISA 2007 requirements with light controls by increasing building efficiency and reducing carbon footprint.

• Light controls can be used to limit heat gain and reduce HVAC energy costs.

• Cutting-edge technologies and scalable solutions ensure that new technologies can be incorporated without rewiring or extensive building renovation.

• Lutron light control solutions are designed to be easily replicated on any project, many without rewiring or expensive installation.

Help your project achieve Net Zero energy

1 Savings is based on 60% reduction in lighting energy and 14% reduction in HVAC energy use. Lighting and HVAC account for 25% and 51% of building energy use respectively (Source: Energy Information Administration. 2008. 2003 Commercial building energy consumption survey.). Contact Lutron for more information.

Lutron | 1

Save money with low-cost light control solutions

• New, low-cost products can deliver a payback of as little as 1-3 years

• Easy-to-install retrofit solutions reduce installation costs, saving you time and money on every job

• Reliable wireless technology eliminates common problems such as interference and communication errors

Reduce total project lifecycle costs

• When compared to traditional, short-term techniques like de-lamping, integrated light control retrofits deliver greater savings and long-term value to projects

• Scalable solutions ensure that you can cost-effectively integrate new strategies and technologies as they are introduced to the marketplace

Maximize energy savings with predictable deep-energy retrofits

• Lutron® controls can reduce lighting electricity use by 60% or more by implementing light control strategies1

• Help achieve Net Zero, and meet aggressive energy codes

• Easily integrate lighting and HVAC controls to generate additional savings

Reduce risk by partnering with the leader in light control technologies

• Lutron has been providing high-quality innovative light controls for more than 50 years

• Customizable Technology Support Plans help protect your system for up to 10 years to ensure you don’t incur any unexpected costs

• Your dedicated, dependable Lutron representative will be with you every step of the way to support your project

Save time and money, and reduce lifecycle costs

1 Glenn Hughes, director of construction for The New York Times Company building in New York City reports 70% lighting energy savings using Lutron systems. Jeff Choma, manager of mechanical and electrical systems at Georgian College in Ontario, Canada reports 70% lighting energy savings using Lutron systems. Lighting energy savings exceeding 60% is frequently reported by customers using Lutron solutions as part of an overall energy- savings design program. Contact Lutron for more information.

2 | Lutron

You can trust Lutron to deliver quality products and unparalleled services with experience earned through working on more than 22 GSA Green Buildings.

Combining light control strategies delivers significant energy savings while ensuring a comfortable, productive environment for employees

High-end trim sets the maximum light level based on customer requirements in each space.

Occupancy sensing turns lights on when occupants are in a space and off when they vacate the space.

Daylight harvesting dims electric lights when daylight is available to light the space.

Personal dimming control gives occupants the ability to set the light level.

Controllable window shading reduces glare and solar heat gain.

Scheduling provides changes in light levels based on time of day.

Demand response automatically reduces lighting loads during peak electricity usage times.

Plug load control automatically turns off loads after occupants leave a space.

HVAC integration controls heating, ventilation, and air conditioning systems through contact closure.

Use the following strategies to achieve deep energy savings

Lutron | 3

Controls(wired and wireless)

Sensors(wired and wireless)

Ballasts and LED drivers

Shading solutions(wired and wireless)

Retrofit Project List

Why Lutron®?

California State University Fullerton, CA

Edward Hines Jr. VA Hospital Hines, IL

Federal Reserve Building Richmond Richmond, VA

Ft. Bragg Ft Bragg, NC

Georgian College Barrie, CA

Glumac Portland, OR

Hammond Federal Courthouse Hammond, IN

Herbert Hoover Building Washington, DC

John C. Kluczynksi Federal Building Chicago, IL

Ralph H. Metcalfe Federal Building Chicago, IL

Reading Area Community College Reading, PA

San Francisco Federal Building San Francisco, CA

Thayer Hotel West Point, NY

Tip O’Neill Federal Building Boston, MA

Tyndall Air Force Base Panama City, FL

United States Military Academy at West Point West Point, NY

As the world leader in light control, Lutron is the only manufacturer in the industry to design, manufacture, and support every component of a system, from ballasts and LED drivers, to wireless sensors and controls, to automated shading solutions.

Total Light ManagementTM

4 | Lutron

As a U.S. – based company, Lutron® has the solutions to meet both Buy American Act (BAA) and Trade Agreements Act (TAA) projects.

Please contact Lutron or your authorized Lutron distributor for assistance with product selection.

BAA and TAA Compliant

Lutron can help you provide high-value, high-return energy solutions to your clients. For more than 50 years, Lutron has designed and delivered energy-saving light controls to our customers.

We are driven by a singular focus – efficient control of all the light in a space.

Our commitment to technological innovation and superb customer support allows us to provide you and your clients with the most advanced energy-saving solutions for every project.

Products

• From simple occupancy/vacancy sensors to automated shade controls and Total Light ManagementTM systems, Lutron allows you to create a light control solution for any project.

• For both new construction and retrofit projects, wireless control provides the same efficiencies without the need for rewiring or expensive installation.

Tools

• Find information on Energy Codes, Standards & Rebates on the Lutron website at www.lutron.com/incentives.• Utilize tools to help you calculate energy-saving payback data with basic project data.

Service• Maintain desired energy performance with comprehensive startup and commissioning services available.• Technical experts can help you with any product question, 24 hours a day, 7 days a week.

Just call 888.523.9466.• Standard and enhanced warranty options and technology support plans available.• Periodic system recommissioning available to guarantee system energy performance.

More than 50 years of innovative, energy-saving solutions

www.lutron.comWorld Headquarters 1.610.282.3800Technical Support Center 1.800.523.9466 (Available 24/7)Customer Service/Quotes 1.888.LUTRON1 (1.888.588.7661)

© 07/2012 Lutron Electronics Co., Inc.P/N 367-2342 REV A

.2 in. space on all sides