www.osram.com/xy
Light is multifaceted Lunis® SL-TVariable lighting solutions set accents in retail environments.Light is OSRAM
www.osram.com | www.siteco.com
4
"One Shop – One Look" - a motto aptly describing the Lunis® SL-T as a new and flexible lighting solution for sales worlds. The single luminaire has a diversity of options: two lighting technologies, two performance packages, two mounting methods, three housing colours and a wide selection of filters and reflectors. Lunis® SL-T enables the simple configuration of ideal lighting. The luminaire is also perfect for individual zones and areas in retail outlets according to specific application, ranging from meat and cheese counters to large car showrooms and museums, and the overall, uniform appearance is always maintained.
One Shop – One Look
— Available in two technologies: LED (gross: ~3,000/5,000 lm) and HIT (35/70 W)
— Very good (CRI > 90) and good (CRI > 80) colour rendering for optimum display of goods
— Optimum colour constancy due to intelligent binning — Filters and reflectors for special applications (food and non-food)
Lunis® SL-T | Range
5
Flexibility is the maxim with the new Lunis® SL-T
spotlight family. The luminaires can be installed as
solitary solutions in 3-phase tracks.
The luminaire as a Modario® IP20 spotlight can
also be integrated into the Modario® trunking
system from Siteco, enabling targeted accents in
addition to room lighting.
6
Lunis® SL-T | Colour Rendering
Goods bathed in the very best lightGood light improves well-being, entices customers, attracts the eye and aids orientation. In short: good light simply sells better. Presenting goods in the best light at all times is one of the primary tasks of retail lighting, whether illumination should be radiant, stylish and appealing or healthy and tasty. Decisive for achieving this is the colour rendering index (CRI), a measure of how far colours with artificial lighting approximate their appearances in natural light. The LED version of the Lunis® SL-T has a colour rendering index of 93 and is thus qualified for all applications where very high colour rendition is indispensable.Consistent quality management, very careful logistics processes and intelligent chip control also ensure maximum levels of colour constancy across the complete Lunis® SL-T LED range and over their complete service life.
OSRAM product guarantees
Siteco and OSRAM aim to produce products fulfi lling maximum demands in terms of quality and function-ality. Because premium OSRAM components are assembled in the Lunis® SL-T, the following OSRAM product guarantees apply:
Lunis® SL-T (LED) 5-year guarantee on assembled
LED module
Lunis® SL-T (HIT) 5-year guarantee on control unit
Lunis® SL-T (HIT) System+ guarantee on high pressure dis-
charge lamp systems: 2-year guarantee on the OSRAM lamp (POWERBALL® HCI-TC) and a 5-year guarantee on the control unit
For information concerning specifi c conditions and mandatory product registration for the System+ guarantee, please refer to:www.osram.com/professional-guarantee
Lunis 5-year guarantee on control unit
Lunis 5-year guarantee on assembled
7
Lunis® SL-T | Quality of Light
High quality light from start to fi nishVery high colour constancy and uniform brightness for all luminaires used are two criteria for qualitative retail lighting, but intelligent binning is needed because natural deviations occur during the manufacturing of LEDs. During the binning process, LEDs are sorted into various bins according to their electronic, photometric and colour properties. The level of fi ne colour deviations is measured with the help of McAdams ellipses, and the lower the deviations the better the LEDs of a bin match each other.
Binning with low quality standards can lead to signifi cantly visible variations within a lighting system. Lunis® SL-T spotlights on the other hand are highly homogeneous in terms of light colour and brightness due to consistent and stringent sorting methods.
Binning with low quality standard
With only three McAdams ellipses they are also better than the current standard of fi ve McAdams ellipses. That means certainty: matching LEDs are supplied for replacements, after-sales and system expansions as well.
In addition, with Lunis® SL-T luminaires the natural, age-related colour drift over the complete operational life is compensated for. The quantity of red colour tone is automatically added via intelligent chip technology to prevent a drift towards the blue spectrum.
Lunis® SL-T with intelligent binning
8
Lunis® SL-T | Individuality
Light for worlds of experienceShowrooms, flagship stores, boutiques and museums are more than just exhibition spaces and locations for sales. They have fundamental concepts that unite the shop and light to create an overall work of art - it's the place where brands, brand messages and customers come together, and lighting is an essential component of modern retail architecture. Thanks to three housing colours of matt black, matt white or silver aluminium, Lunis® SL-T integrates harmoniously into a wide diversity of aesthetically sophisticated interiors. Architecture and lighting come together as a single unit. Uniform optics still enable the convincing presentation of various zones with differing functions, whether for exhibition surfaces, shop windows, aisles or accent highlights.
Spot on for trends and must-have goods! The targeted use of light in fashion stores and boutiques aids sales promotion, and the purposeful play with strong contrasts determines the attention of customers and guides their glance to products or areas intended to be focused on by retail store operators. It is vital that colours and materials are rendered according to reality and that an impression of quality is communicated.
9
Lunis® SL-T | Individuality
Showrooms are symbolic for brands. Everything has to be matched down to the last detail, and lighting is primarily for the presentation of such worlds of experience.If cars are exhibited for example, lighting must be especially carefully planned because individual light points are reflected on car bodies and may cause glare. The Lunis® SL-T spot has clip-on glare protection in the form of a protective glass that prevents a direct view of the light source.
The art of illumination and protectionMuseums and galleries are special cases. Light must be prohibited from damaging exhibited works of art, as UV radiation over longer periods of time can damage paint, colours and surfaces. The same applies to the excessive development of heat at the work of art. The LED versions of the Lunis® SL-T are highly practical in this sense, providing almost completely UV-free light. Any heat generated cannot be conducted onto the object via light rays as with conventional lighting. The HIT variant of the spotlight has a suitable UV and IR filter that protects art works from luminaire caused hazardous UV and heat/IR radiation.
Lunis® SL-T | Goods Presentation
10
Light for worlds of freshnessAppetizing, tasty, fresh and healthy - food has to be shown with special care to excite the interest of customers. Lunis® SL-T with its specific colour filters and reflectors bathes goods in the best light in food areas. To successfully gain the loyalty of customers, even daily shopping has to now become an experience, which is why lighting accents are important in markets to specifically attract attention. Various zonal lighting solutions can be implemented with a uniform design, for example higher illuminance at gondola heads, where special offers are presented. The right light says to customers: grab it!
Colour effects according to the food-stuff sector can be highlighted by using special colour filters.
— red for meat and cold meat counters
— yellow for bread and baked goods
A champagne-coloured reflector is also available as an accessory,
suitable for the illumination of cheese counters.
Lunis® SL-T | Goods Presentation
11
Trunking installed parallel to shelving is an extremely efficient lighting solution for the retail sector. Modario, the trunking system from Siteco, has already been installed in a great many outlets. The Lunis® SL spotlight is designed for simple integration into the rail system, and as a spot between general lighting it specifically illuminates individual zones.
12
Lunis® SL-T | Overview
Light for diverse applicationsA shop is not just a shop. Sales spaces all have different concepts, which is why the Lunis® SL-T has a modular design. This means it is future-safe and can be configured according to customer needs: another application demands another configuration. With HIT variants, the reflectors and filters can even be modified and retrofitted without tools.
narrow distribution medium distribution
Housing colours
for 3-phase track for Modario® trunking rail
Reflectors
Optional accessories
Light color 3000 K or 4000 K
Light source ~3000 lm or 5000 lm
Lunis® SL-T LED light source
Glare protection
LED
13
Lunis® SL-T | Overview
medium distribution
for 3-phase track for Modario® trunking rail
to choice
35 W or 70 W
Lunis® SL-T HIT light source
champagne-coloured reflector
narrow or medium distribution
360°
60°
HIT-TC-CEG8,5
narrow distribution
dichroic
UV filter
dichroic
IR filter
Dichroic
yellow filter (bread/baked goods)
Dichroicred filter
(meat/cold meat counters)
Glare protection
14
Lunis® SL-T | Application Examples
Lunis® SL-T in non-food areasfor use in standard 3-phase tracks
Boutiques
Showrooms
Shop in shop
Lunis® SL-T with LED
Beam angle narrow
Luminaire luminous efficacy 75 lm/W
Net luminous flux 2620 lm
Colour rendering (CRI) > 90
Colour temperature 3000 K
Lunis® SL-T with LED
Beam angle medium
Luminaire luminous efficacy 95 lm/W
Net luminous flux 5230 lm
Colour rendering (CRI) > 80
Colour temperature 4000 K
Lunis® SL-T with HIT
Beam angle narrow
Luminaire luminous efficacy 67 lm/W
Net luminous flux 2800 lm
Colour rendering (CRI) > 90
Colour temperature 4000 K
15
Lunis® SL-T | Application Examples
Lunis® SL-T in food areasas Modario® spotlight integrated in a Modario® trunking system
Fruit and vegetables
Gondola head
Service counter
Modario® spotlight with LED
Beam angle Medium
Luminaire luminous efficacy 75 lm/W
Net luminous flux 2620 lm
Colour rendering (CRI) > 90
Colour temperature 3000 K
Modario® spotlight with LED
Beam angle narrow
Luminaire luminous efficacy 94 lm/W
Net luminous flux 3260 lm
Colour rendering (CRI) > 80
Colour temperature 4000 K
Modario® spotlight with HIT
Beam angle narrow
Luminaire luminous efficacy 67 lm/W
Net luminous flux 2800 lm
Colour rendering (CRI) > 90
Colour temperature 4000 K
with red dichroic filter
16
Lunis® SL-T | Accessories
Glare protection
for reduction of luminance with direct viewing
into spotlight | plastic, silver-coated | simple
mounting: clipped into refl ector
Dichroic conversion fi lters
for optimal presentation particularly for fresh
products due to improved fi lter characteristics
with less heating of glass (compared to con-
ventional fi lter glass) | fi lters for various food-
stuffs and other sensitive goods | simple
mounting via laying into mounting ring of
refl ector
Glare protection
for reduction of luminance with direct viewing
into spotlight | clear disk, frosted in central
area and on outer edge | simple mounting via
laying into mounting ring of refl ector
Refl ector, champagne-coloured
for optimal display of products, especially
baked goods and cheese | aluminium refl ector,
champagne-coloured | for replacing standard
refl ector
Refl ector, silver
for subsequent modifi cation of the beam angle
| aluminium refl ector, silver-colour | for
replacing standard refl ector
Lunis® SL-T | optical accessory for LED configuration
Type Order No.OSRAM
Order No.Siteco
Glare protection 4052899902961 5DS90900
Lunis® SL-T | optical accessory for HIT-TC-CE configuration
Type Order No.OSRAM
Order No.Siteco
Conversion filter for baked goods/cheese 4052899902619 5DS7000B
Conversion filter for meat/sausage/fish 4052899902602 5DS7000W
IR filter 4052899902596 5DS7000I
UV + IR filter 4052899902589 5DS7000U
Type Order No.OSRAM
Order No.Siteco
Glare protection 4052899902664 5DS9545BEE
Type Order No.OSRAM
Order No.Siteco
Reflector, champagne-coloured, narrow distr. 4052899902626 5DS7102G
Reflector, champagne-coloured, med. distr. 4052899902633 5DS7103G
Type Order No.OSRAM
Order No.Siteco
Reflector, silver, narrow distribution 4052899902640 5DS7102S
Reflector, silver, medium distribution 4052899902657 5DS7103S
17
Lunis® SL-T | Modario® Spotlight
Modario® IP20 SpotlightLunis® SL-T is not only available as a solitary solution for 3-phase tracks, but also as a spot unit for the Modario® trunking system from Siteco under the name of Modario® IP20 spotlight. This means Modario® offers flexible solutions in the shop sector for combining homogeneous general lighting with accenting for goods presentation within a single system.
The Modario® trunking system with fully compatible modular construction adapts individually to complex lighting tasks. The basis is the 5 or 10-core wired trunking rail and an open distribution insert. Various reflectors, socket outlet modules, tracks and spots such as the Modario® IP20 spotlight module are available.
Modario® trunking system detailed: www.siteco.com/modario
Ord
er n
umb
ers
7QC
P04
1GB
| 19
62
03.
2015
| Te
chni
cal m
odifi
catio
ns a
nd e
rror
s su
bje
ct t
o ch
ange
.
www.osram.com | www.siteco.com
OSRAM GmbH
Head office:
Marcel-Breuer-Strasse 6
80807 Munich | Germany
Phone +49 89 6213-0
Fax +49 89 6213-2020
www.osram.com
Siteco Beleuchtungstechnik GmbH
Head office:
Georg-Simon-Ohm-Strasse 50
83301 Traunreut | Germany
Phone +49 8669 33-0
Fax +49 8669 33-397
www.siteco.com
Member of