58 PHOTO COURTESY OF COBALT BOATS
Control of light levels gives customers added value. The digital dimmer switch options provide aesthetic options for application coordination and levels of light dimming. CSA listed, the digital dimmers are designed specifically for the Marine environment.
Integrated capability using the CAN system to interface with NMEA 2000 and J1939 on MFD manufacturer’s operation systems. ITC controllers are N2K certified having met rigorous and mandatory software requirements.
The ability to easily control RGB and RGBW lighting is key to increasing customer satisfaction and creating an entertainment packed atmosphere. VersiControl controller options allow for physical or wireless control of the VersiColor RGB and RGBW lighting products. The VersiControl controllers offer several options including single, dual, or four zone opportunities for interior or exterior applications.
DIGITAL SWITCHES
MFD INTERFACE READY NMEA 2000 & J1939
VERSICONTROL RGB/RGBW CONTROLLERS
L IGHT ING CONTROLL IGHT ING CONTROL
59
60
VERSICONTROLTM RGB/RGBW CONTROLLERS
60
VERSICONTROLTM RGB/RGBW SMART SYSTEM
• NMEA 2000 Certified• Available with J1939 or NMEA 2K Network with integrated connectors for simple installation• The smart system allows the user to independently control up to four zones of lighting through either
the pad controller (RGB only) or phone app• The smart system can be used as a stand alone product or integrated into the digital dash via a CAN
Bus system or NMEA 2K network• Intuitive operation and easy visuals make controlling the lights functional and fun• The pad controller works with the RGB lighting system allowing for adjustment of the color, brightness
or color fades in each zone, while the app provides even more control and customization features. Note: Pad controller for use with RGB system only.
• Pad and control module for use with RGB system are available in 2 or 4 zone options• Small footprint and aesthetics integrate with dash and radio controls• IP66 water resistant rating• The RGBW system allows for complete color control of RGB chips and high quality white chips
independently or together
ITEM NUMBER DESCRIPTION INPUT VOLTAGE CURRENT BLUETOOTH TYPE REMOTE DISTANCE IP RATING
22ABX -KKK -SS -CC RGB/RGBW Control Module 11 - 28 V
4 Zone:20 A max
8 A per zone max2.65 A per channel
2 Zone: 16 A max
8 A per zone max2.65 A per channel
Bluetooth 4.0 BLE(Operating system:
IOS 10.0/Andriod 5.0 or greater)
100 FT IP66
21055* Four ZoneRGB Pad Controller
10 - 28 V 0.5 A N/A21055-2Z* Two Zone
RGB Pad Controller
*NOTE: The Pad Controller is for use with RGB System Only
SPECIFICATION KEY [ REPLACE A, B, Z, KKK, SS & CC AS INDICATED BELOW ]
A = Audio Option 5 = Without Audio | 7 = With Audio
B = Bluetooth Option 0 = Without Bluetooth | 1 = With Bluetooth
Z = Zone Options 2 = 2 Zone | 4 = 4 Zone
KKK = LED Color RGB = RGB | RGBW = RGBW
SS = Software 00 = J1939 | NM = MNEA2K
CC = Connector Option 00 = Without DT Connectors | 01 = With DT Connectors
2 0 2 0 M ARINE PRODUC T CATALOG 61
LIG
HTI
NG
CO
NTR
OL
• Control the color, color fade and brightness of each zone independently or together
• Backlit display provides easy in-the-dark control• Quick white button for convenience, security and
safety• Manual Bluetooth pass code reset• NOTE: For use with RGB system only
• Provides all the same control features of the control pad including color, color fade, brightness and quick white
• Additional control features available on the app include:
• Music beats• Camera color selection• Set personal custom color effects• On/Off timer• Individual zone lock-out• Personal pass code security
• NMEA 2000 Certified with integrated connectors• Custom programming available for brand
differentiation (Contact ITC for more information)
• Disabling zones one and two when the unit is in motion
• Bluetooth and CAN Bus controlled• Smart FET protection and fusing on return lines• Individual microcontroller per zone and master
micro ensures consistent light output between all zones
• Simple dip switch controls allow for easy customization including:
• Setting the system to power up in either the on or off state
• Password reset back up
CONTROL MODULE
CONTROL PAD
PHONE APP
7.5"
5"
TOP VIEW
5"
SIDE VIEW
2"
3.1"
Ø2.6"
2 ZONE CONTROLLER
4 ZONE CONTROLLER
VERSICONTROLTM RGB FOUR ZONE KNOB CONTROLLER
• Simplified RGB wiring layout allows for easier installation while still maintaining four separate zones
• Single knob controller allows for control of up to four zones with the addition of OEM supplied switches. The knob’s LED indicator displays the current color of the lights
• Three control settings including color selection, dimming, and speed of color fade
• Choice of silver or black knob finish options• Smart FET protection on control module
prevents damage to the controller in the event of a power serge or installation error
• Knob etched with 'RGB LIGHTING' text option available
4.8"
1.2"
1.6"
2.9"
ITEM NUMBER DESCRIPTION KNOB TEXT KNOB FINISH MAX AMP DRAW VOLTAGE IP RATING OVER CURRENT PROTECTION
21090-XX -LL -SS Four Zone Controller Various See Spec Key
Various See Spec Key
20 A Max8A Max Per Zone 12-24 V IP55 25 A In-Line Fusion
ETCHED KNOBS AVAILABLE
62
SUPERIOR LIGHTING CONTROL IN THE PALM OF YOUR HANDS
VERSICONTROLTM L IGHTING SYSTEMS
SPECIFICATION KEY [ REPLACE XX, LL AND SS AS INDICATED BELOW ]
XX = Knob Type SA = Silver Knob without Text | BA = Black KnoB without Text | ST = Silver Knob with Text | BT = Black Knob without Text
LL = Wire Length 00 = 8.5” Wire Length | 01 = 22.5” Wire Length
SS = Power Controls 00 = Power Up Off | 01 = Power Up On
63
LIG
HTI
NG
CO
NTR
OL
2 0 2 0 M ARINE PRODUC T CATALOG
SUPERIOR LIGHTING CONTROL IN THE PALM OF YOUR HANDS
VERSICONTROLTM L IGHTING SYSTEMS
VERSICONTROLTM RGB FIXED COLOR SELECTOR
• Allows factory to custom program a single color light option from a nearly unlimited RGB color spectrum
• Ideal for applications where a specific color is needed to match a design scheme
• Factory programing ensures the same color is used every time and eliminates the need for field programming
ITEM NUMBER DESCRIPTION VOLTAGE MAX AMP DRAW IP RATING
21060-001 RGB Fixed Color Selection Module 12-24 V 12 A Max
4 A Max Per RGB Wire IP50
2"
3.2"
0.8"
VERSICONTROLTM RGB/RGBW SIGNAL AMPLIFIER
• Provides an additional power input that helps maintain the RGB/RGBW signal over long runs
• Prevents dimming or sync issues with other RGB/RGBW zones
• ITC recommends an amplifier when running 90% of full load with 14 gauge wire at lengths of 20’ or more.
• Lights can be run in parallel (not daisy chained) if amplifier amperage is not exceeded
3.1"
1"
2.5"ITEM NUMBER DESCRIPTION VOLTAGE MAX AMP DRAW IP
RATINGOVER CURRENT
PROTECTION
21080-18 RGB Signal Amplifier
12-24 V
18 A Max6 A Max Per RGB Wire
IP66 20 A In-Line Fuse
21081-24-01 RGBW Signal Amplifier
24 A Max6 A Max Per RGBW Wire
VERSICONTROLTM RGBW BLUETOOTH CONTROLLER
• Dual zone controller• Free companion basic smartphone app allows
the user to control the color, brightness, and fade speed (App download instructions included)
• Simple wiring instructions included with controller allow for easy installation
• Ability to create and save up to 20 presets and save color modes to personal playlists
• RGBW controller can be controlled by a smartphone or tablet
• Use with Hao Deng or Magic Light app
4.9"
1.8"
0.9"
DUAL ZONE
ITEM NUMBER DESCRIPTION VOLTAGE MAX DRAW CONNECTION TYPE IP RATING REMOTE
DISTANCE
21070-12 RGBW Dual Zone 12 - 24 V 4 A/Channel12 A Max Bluetooth 4.0 IP66 100 FT
PHOTO COURTESY OF COBALT BOATS
64
65
LIG
HTI
NG
CO
NTR
OL
2 0 2 0 M ARINE PRODUC T CATALOG
DIGITAL SWITCHES
PIR MOTION SENSOR POWER SWITCH
• Passive Infrared (PIR) sensing technology designed to detect the movement of heat emitting bodies
• Automatic on/off operation. The sensor will turn the light on when motion is detected and off again when motion is not detected for three minutes
• Daisy chain multiple lights to a single PIR• In-line replaceable fuse prevents damage to
the system• Mounting screws included for simple
installation
• Available in black or brushed nickel finishes
ITEM NUMBER DESCRIPTION FINISH MAXWATTAGE VOLTAGE MAX
AMP DRAW
690030.30.054-XX PIR Motion Sensor Power Switch
Various See Spec Key 14 W 11 - 14 V 1 A
SPECIFICATION KEY [ REPLACE XX AS INDICATED BELOW ]
XX = Finish BK = Black Cover | NI = Brushed Nickel Cover1.2"
2.2"
.5"
DIGITAL DIMMER
ITEM NUMBER DESCRIPTION FINISH LISTING MAXWATTAGE VOLTAGE MAX
AMP DRAW
21005 Digital Dimmer w/ Black Knob Black
CSA 80 W 10-14 V 6.7 A
21006-CH Chrome Cover Plate & Knob Chrome
21008-BL Black Cover Plate Black
21006-NI Brushed Nickel Cover Plate & Knob Brushed Nickel
21006-WH White Cover Plate & Knob White
• LED compatible• 12V DC 100 watt dimmer can handle up to 80
watts of draw• Recess mount with several bezel finish options
available• Order dimmer and decorative cover plate/knob
separately• High frequency: 120Hz• Dimming range: 15% - 100% with even gradual
transitions• Simple wiring: 2 wire input from power and 2
wire output to light fixtures. (Installation/wiring instructions available)
SHOWN WITH NICKEL COVER PLATE
3.7"2"
2"
.75"
21005