+ All Categories
Home > Documents > LIGHTING RACKS - 1&1 Internet · LIGHTING RACKS POUCHES WINDSHIELDS ACCENTS FLOORBOARDS ... LED H4...

LIGHTING RACKS - 1&1 Internet · LIGHTING RACKS POUCHES WINDSHIELDS ACCENTS FLOORBOARDS ... LED H4...

Date post: 09-Apr-2018
Category:
Upload: trannhan
View: 213 times
Download: 0 times
Share this document with a friend
12
NEW PRODUCT CATALOG SUPPLEMENT TOURING & CRUISING WWW.BIGBIKEPARTS.COM 85 + NEW ACCESSORIES LINERS LIGHTING RACKS POUCHES WINDSHIELDS ACCENTS FLOORBOARDS & MUCH MORE
Transcript

N E W P R O D U C T C A T A L O G S U P P L E M E N TTOURING & CRUISING

W W W . B I G B I K E P A R T S . C O M

85+NEWACCESSORIES

LINERS LIGHTINGRACKSPOUCHESWINDSHIELDSACCENTSFLOORBOARDS& MUCH MORE

2 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

LED MR16 Replacement BulbThis high-output, high-intensity Litespan LED from Big Bike Parts® is an easily installed replacement for your halogen MR16 lights. LEDs operate at a lower temperature and power load than halogen with an average 25,000 hours of use. This miniature LED reflector bulb produces 400 Lumens from its 12 volt 7 watt 6 LED output with a bright white 4000k color output. These non-dimmable Litespan LEDs fit all standard MR16 Bi-Pin GU5.3 bases. Their concentrated beam angle of 20° puts more light down the road in front of you for true driving light capability. Replaces all Big Bike Parts® MR16 Halogen bulbs as used in its # 16-104A, 2-542, 52-757 and Mini Driving Light kits

Rectangular Rocker SwitchThis Rectangular Rocker Switch from Big Bike Parts® is a perfect fit for the existing Victory Cross Country/Magnum switch expansion knock outs on each side of the radio. This single pole switch has standard ¼" spade connectors for ease of use. The black textured finish is a great match with the Victory dash and supports up to 10 amps. Fits cut outs of .48" x 1.072" sizes.

Helmet Headset 7 Pin HarleyThis popular helmet headset is now available in 7 Pin Din for the 1998 and newer Harleys. The slim unobtrusive headset microphone is attached to a flexible boom for easy positioning in full face, open face and modular helmets. Comes with a quick disconnect plug allowing for convenient detachment and attachment. Headset includes an 8 foot coiled cord for connection into the bike’s 7 Pin Din connection. The proven high frequency speakers provide clear, crisp sound for music and audio.Fitment Part No. Unit MSRP

Harley 1998 & newer 13-204 Set $89.95

Helmet Headset 7 Pin Replacement Cord

13-209 Each $29.95

13-204

Replacement AntennaOccasionally something breaks or get damaged on your bike. It is for this reason Big Bike Parts® introduces a replacement CB Antenna Base Staff Assembly and Tips for the GL1500 and GL1800 Goldwing. Universal fitment with OEM and Big Bike Parts antennas. Sold as an assembly with the base staff and tip or just the CB tip.

Fitment Part No. Unit MSRP

C.B. Antenna Staff & Tip 952657S Set $49.95

C.B. Antenna Tip Only 952657T Each $6.95

952657S

LED Mini Driving LightsAn LED version of the Big Bike Parts® Mini Driving Lights with built in visors is now available. These die cast chrome universal LED Mini Driving Lights are 3¾" long with a 2⅜" diameter that can mount to existing light bars with the 8mm threaded stem. Set screw bezeling allows for complete rotation of the visor.

Description Part No. Unit MSRP

LED Mini Driving Light 16-104LED Each $65.95

Replacement Bulb 10-1625 Each $24.95

Fitment Part No. Unit MSRP

LED MR16 Replacement Bulb 10-1625 Each $24.95

LED H4 CREE BulbBig Bike Parts® brings to the industry new LEDs based on requirements for ballasted replacement assemblies. This new H4 LED Replacement assembly utilizes the exceptional quality of CREE LEDs in a ballasted driver with cooling fan. This new H4 LED Replacement offers a bright white 6000K color with 22 watts at 2000 lumens on Low Beam and a whopping 30 watts at 2600 lumens on high beam. As H4 bulbs are used by almost every motorcycle manufacture since the 1980’s these CREE LED Ballasted Replacements will fit most pre 2013 Harleys; GL1200 and GL1500 Honda Goldwings, Valkyrie and VTXs; Kawasaki Vulcans; Suzuki 800s to 1600s; Victory Vision and Yamaha V-Stars, Royal Star, Road Star and V-Maxs.

Fitment Part No. Unit MSRP

LED H4 CREE Bulb 10-106 Each $65.95

Fitment Part No. Unit MSRP

Black Rectangular Rocker Switch

16-38 Each $2.95

Touring / Cruiser / Trike AccessoriesH E L M E T H E A D S E T + L E D B U L B S & L I G H T + A N T E N N A + R O C K E R S W I T C H

16-104LED10-106

10-1625

16-38

3N e w P r o d u c t C a t a l o g S u p p l e m e n t • w w w . b i g b i k e p a r t s . c o m • E - m a i l i n f o @ b i g b i k e p a r t s . c o m

Straight Valve StemsThese Aluminum Tire Valve Stems are available in either silver or black anodized finish. Their low profile is only 13/16" in length, making them fit any tight space needing a compact stance. The metal base will not pull thru the wheel rim, which needs a minimum of 8mm hole for clearance. An inner and outer rubber grommet washer provides a leak proof seal. An external nut allows for easy tightening of the valve stem for any needed maintenance. Sold as a pair.

Fitment Part No. Unit MSRP

Silver Anodized MW 8mm holes

5-801 Pair $11.95

Black Anodized MW 8mm holes

5-801BK Pair $11.95

5-801

5-801BKLock-On Valve Stem ExtensionIt can be difficult to attach an air chuck on your valve stem to check or add air, Big Bike Parts® has simplified this process with their Lock-On Valve Stem Extension. This convenient flexible nylon air hose locks on with a snap to your tire valve stem extending access 24" allowing easy access for checking and filling any tire. This Lock-On Valve Stem Extension actually improves safety by making it easier to do routine pressure checks and fills. Designed with a universal lock on stem connection.

Fitment Part No. Unit MSRP

Lock-On Valve Stem Extension 5-803 Each $9.95

Universal Trailer Wire HarnessAs motorcycles get more complex with electronic ignitions, fuel injection, ABS braking and other sensitive electronics, isolating electronics between your motorcycle and trailer is critical for safe riding. This Universal Electronically Isolated Trailer Wire Harness eliminates electronic backflow with heavy duty self-setting relays to protect your motorcycle. This five wire system provides direct connection for running, brake, left/right turn signal and ground. Weather resistant gel sealed splice connectors are included to make an easy and durable connection for long term use. Designed for use on Harleys, Yamahas and other great trailer pulling vehicles.

Fitment Part No. Unit MSRP

Universal Electronically Isolated Trailer Wire Harness

16-125 Each $55.95

Tour Rack RisersGet more clearance under your luggage racks allowing for easy cleaning or to allowing other accessories to fit below. Big Bike Parts® has the perfect solution with the new Tour Rack Risers. These Rack Risers universally fit ½" diameter tubes with a custom recessed bevel to securely fit and enhance your original rack legs. They extend rack legs ⅝" and fit racks with ½" round legs. Comes as a complete set of 4 Rack Risers with two sets of bolts, 4 x 6 mm (M6) bolts and 4" x ¼" - 20 bolts, to replace the shorter bolts that come with most racks. For best fit place risers between the rack leg and the angled feet that come with Show Chrome Accessories® racks.

Fitment Part No. Unit MSRPTour Rack Riser for ½” Tube 52-837 Set $22.95

Universal Trike Rear Fender BraBased on your feedback, Hopnel™ has updated it’s Black Classic Trike Rear Fender Bra to include two choices of mounting. The screw in snaps are now optional. While snaps add a decorative flare, they are supplemented by a full width hook and loop alternative that goes across the top. Choose the adhesive backed loop for attachment to your bike or the snaps provided, or use both. These Trike Rear Fender Bras absorb the scuffs, scrapes, and scratches that plague the front of most rear trike fenders. Embedded steel straps wrap to the bottom of the fenders and two snaps or hook and loop both hold the top. Fits most Trike rear fenders without flares, such as Motor Trike, Champion, Lehman, Hannigan, California, Roadsmith, and Harley. Fitment Part No. Unit MSRP

Trike Rear Fender Bra. Fits Most Trikes - Motor Trike, Lehman, Champion, Hannigan, Harley, etc.

H50-03BKC Pair $49.95

T R A I L E R W I R E H A R N E S S + V A L V E S T E M S + T R I K E B R A S + R A C K R I S E R S

16-125

5-803

52-837

H50-03BKC

4 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

Gadget BarThis new Gadget Bar snaps into our Smart Mount™ accessory receiver as used on our beverage holder and smart phone/GPS holder. The Gadget Bar’s ⅞" round tube and 4½" width allows for placement of additional handlebar mounted accessories and gadgets, should the need arise. This universal Gadget Bar will accept any attachment capable of mounting to a ⅞" handlebar, allowing you to bring everything and mount it within easy access. Can be ordered with a complete handlebar mount or separately to fit with your existing beverage or Smart Mount™ GPS/phone mount. Fitment Part No. Unit MSRP

Gadget Bar with Handlebar Face Clamp for Honda, Yamaha, etc. with 32-35mm O.C. Hole Spacing 52-844 Kit $49.95

Gadget Bar with Handlebar Face Clamp for Can-Am RT SE 2010-2015 41-167 Kit $49.95

Gadget Bar Only for Receiver Mounts. Fits BBP # 52-835, 52-836, 41-165, 41-171, 52-839, 52-840 52-844G Each $19.95

GPS/Cell Phone Holder For Driver or PassengerAll these new Smart Mount™ for cellphones and GPS units fit our existing handlebar and armrest mounts used with the Smart Mount™ Beverage Holders. This holder accommodates most Smartphones and GPS units up to 3½" wide, and includes ½" expansion tabs. Rubber gripped back and foam side tabs hold your equipment securely in place. An additional single web strap is included for those that want a little more personal security on rough roads. Available by itself to fit your existing Smart Mount™ Beverage Holder Mounts or sold with either a handlebar mount or armrest mount.

Fitment Part No. Unit MSRP

GPS/Phone Handlebar Mount For Handlebar Face Clamps 32-35mm Hole Spacing 52-839 Kit $59.95

GPS/Phone Armrest Mount For All Big Bike Parts® Armrests and select others. 52-840 Kit $59.95

GPS/Phone Handlebar Mount For Can-Am RT 41-171 Kit $59.95

GPS/Phone Holder Only without Receiver For Handlebar or Armrest. 52-835P Each $32.95

52-844 52-844G41-167

41-17152-835P 52-84052-839

Inferno™ Heated Grips with Thumb Warmer for ATV / SnowmobileInferno™ Heated Grips with Thumb Warmer for your ATV or Snowmobile are the standard in power sports heating. Our grips will maintain a whopping 170° F, which means they heat the actual grip and your hand versus losing it all to the cold. The grips work with open or closed ended bars and use Big Bike Parts® industry leading E-Z™ controller for easy single button control with 5 pre-set heat settings. New smart logic design allows the activation of an optional battery saver mode which will shut the grips off if your battery voltage falls below 12.5 volts. The Thumb Warmer is a Plug ‘N Go installation and works with all Big Bike Parts® heated grip wire harnesses, allowing them to be added to existing installations. These grips fit ⅞" snowmobile and ATV bars, no throttle sleeves.

Fitment Part No. Unit MSRP

Inferno™ Heated Grips with Thumb Warmer For ATV/Snowmobile ⅞” bars 17-992 Set $89.95

Inferno™ Thumb Warmer Only 17-991 Each $16.95

G P S / P H O N E H O L D E R + G A D G E T B A R + H E A T E D G R I P S

17-992

Touring / Cruiser / Trike / ATV Accessories

5N e w P r o d u c t C a t a l o g S u p p l e m e n t • w w w . b i g b i k e p a r t s . c o m • E - m a i l i n f o @ b i g b i k e p a r t s . c o m

Fitment Part No. Unit MSRP

Beachcomber with 1” Clamp. Fits 1” Highway Bars 21-340 Kit $249.95

Beachcomber with 1¼” Clamp. Fits 1¼” Highway Bars 21-341 Kit $249.95

Beachcomber with 6mm Passenger Mount. For VT750 Spirit, VT1300 S/R/T, VTX1300 2004- , VTX1300C 2004- , VTX1800 2005- , C50, M50, VStar950, 1100, 1300

21-342 Kit $249.95

Beachcomber with 8mm Passenger Mount. For VT1100 C2 European Model only 1994, VTX1800 2002-2004, VN900, VN1500 Vulcan Classic, VN1600, VN1700, VN2000, VL1500

21-343 Kit $249.95

Beachcomber Passenger Boards for Most Harley’s 1986 to current. 7/16” Male Mount 21-912 Kit $249.95

Beachcomber Passenger for Can-Am RT 41-175 Kit $259.95

Beachcomber Driver for Can-Am RT SE 2010-2015, Not 2013-2015 S-SE or LTD 41-176 Kit $259.95

Beachcomber Boards for Highway BarsBeachcomber Boards tip the scales of style and function with a fresh design from Big Bike Parts®. These new boards fill the demands of motorcycles in style, comfort and performance. Made from forged aluminum, the Beachcomber Boards are CNC milled for unparalleled strength and durability and finished with Show Chrome Accessories® brilliant chrome finish. The Beachcomber Board utilizes an anti-rotation system mount to allow fitments in a 360° range and insure the boards will not pivot once secured. A generous board size of 6¼" x 4" x 1" allows a comfortable foot rest and is available in a variety of fitments for driver, passenger or highway bars.

21-340 21-342

Fitment Part No. Unit MSRP

Cruis™ Board Passenger for Most Harley’s 1986 & newer. 7/16” Male Mount 21-910 Kit $125.95

Vantage Board Passenger for Most Harley’s 1986 & newer 21-911 Kit $249.95

Vantage and Cruis™ Boards for HarleyBig Bike Parts® introduces all new fitments for its popular passenger Vantage and Cruis™

Boards now available with Harley 7/16" passenger mounts. These boards fill the demands of motorcycles in style, comfort and performance. Made from forged aluminum, these boards are CNC milled for unparalleled strength and durability and finished with Show Chrome Accessories® brilliant chrome. Each board utilizes Big Bike Parts® anti-rotation system mount to allow fitments in a 360° range and insure the boards will not pivot once secured. Generous board sizes allow for a comfortable foot rest for your passenger. These boards are designed to fit all Harley models 1986 and newer with 7/16" male mount-style foot peg supports.

Lever LacesIt is the simple things that make the difference! Big Bike Parts® Leather Lever Laces have been around forever, but are now improved. A thicker leather material gives these Leather Lever Laces a fresh look and firmer feel. These 1¾" x 4½" leather grips have 12" long laces that cover and hang from your levers. They lace over the brake and clutch levers.

Fitment Part No. Unit MSRP

Fits Most Brake & Clutch Levers 17-110 Pair $19.95

41-175 & 41-176

21-910 21-911

B O A R D S + L E V E R L A C E S

17-110

6 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

C O V E R S + R A C K B A G + B A C K R E S T O R G A N I Z E R

UltraGard™ Classic SeriesThree new covers have been added to the UltraGard™ Classic Series line of covers offering exceptional value without compromising the features you have come to expect. From large touring, bagger, trike, Can-Am, cruiser, street bike, scooter or a trailer, the Classic Series is a great value.•Tailor fit designs take into account the natural stance of your motorcycle.•Heavy duty water resistant polyurethane coated polyester provides excellent protection against weather, dirt and pollution.•UV stabilized to maximize fabric life and minimize color fading from sun exposure.•Scorch resistant heat shield protects the cover from hot exhaust pipes and allows use of cover immediately after riding.•Double stitched, four fold interlocking seams to provide durability and a water tight closure.•Zippered windshield and sissy bar pockets on cruiser covers expand to fit many bike configurations.•SoftTek windshield liner to prevent scratching.•Largerust-proof grommets prevent tearing.•Sewnelastic hem and bungee cord ensures a tight custom fit. •Highvisibilityreflective logo adds safety while parked.•Convenientandcompact storage pouch is easily portable.•Fiveyearwarranty.

Description Color Fitment Part No. Unit MSRPXL Trike Cover Black/Charcoal XT 4-466BC Each $85.95Can-Am Spyder F3 Series Black/Charcoal F3 4-476BC Each $79.95

Can-Am 2010 - RT/RTS/RT Limited. Half Cover

Black H 4-457BK Each $44.95

Deluxe Expander Rack BagHopnel™ sewn products introduces our generous 3500 Deluxe Expander Rack Bag that easily secures to most luggage racks. The main compartment measures over two cubic feet of storage space with a reinforced body providing consistent packing space and durability. The large 22" x 15’’ x 9½" main compartment has zippered expander pockets on each end, providing an additional 5" of extra storage space. The bottom is reinforced with a no slip textured surface, ensuring your luggage stays in place for long term use and wear. Includes a top 15½" x 6" convenient zippered mesh pouch and two more end zippered 13" x 6" pockets. A tethered all weather vinyl coated rain cover can retreat to its own zippered pocket when not in use. Comes with four hold down fastener points with quick install straps to allow fitment to almost every motorcycle luggage rack. Comes with convenient shoulder strap.

Fitment Part No. Unit MSRP

Fits Most Luggage Racks H50-113BK Each $109.95

4-466BC 4-476BC 4-457BK

Backrest Organizer for Goldwing and Can-Am SpyderAdd convenient storage to your backrest in a snap with a Hopnel™ Backrest Organizer. This dual pocket organizer attaches to the existing snaps as found on backrests from Big Bike Parts®, Hopnel™ and Show Chrome Accessories® for the Goldwing GL1500/GL1800 and Can-Am Spyder. Overall size is 8¾" x 6½" x 2½" with three storage compartments. One zippered pouch measuring 6½" x 3½" x 2¼", one larger zippered pouch measuring 6½" x 5" x 2¼" and a mesh 4½" x 4" pocket. The # H50-114PO is designed for the Goldwing GL1500/GL1800 models fitting Big Bike Parts® backrests # 2-377, 52-567, 52-637, 52-771, and 52-797. The # H41-168PO is designed with material for the Can-Am Spyder and Goldwing F6B fitting Big Bike Parts® backrests # 41-158, 41-168 and 52-832. Made in the USA.

Fitment Part No. Unit MSRPGoldwing GL1800 and GL1500 Models Fitting BBP Backrest # 2-377, 52-567, 52-637, 52-771, 52-797 H50-114PO Each $49.95Can-Am Spyder and Goldwing F6B Fitting BBP Backrest # 41-158, 41-168, 52-832 H41-168PO Each $49.95H50-114PO

Covers & Storage Solutions

H50-113BK

7N e w P r o d u c t C a t a l o g S u p p l e m e n t • w w w . b i g b i k e p a r t s . c o m • E - m a i l i n f o @ b i g b i k e p a r t s . c o m

S A D D L E B A G L I D B R A S + P O U C H E S + S A D D L E B A G & T R U N K L I N E R S

Saddlebag Lid Bra Set For Harley and VictoryIntroducing the all new Hopnel™ Saddlebag Lid Bra Set for the Harley FLH and Victory Cross Country and Cross Road models. Saddlebag Lid Bras stop the scratches and cover those that might already be there. A tapered design leaves the saddlebag lids exposed while protecting and covering the front portion. Secures in place with hook and loop to the inside top of the saddlebag lid in four locations. Removes easily for cleaning. Made in the USA.Fitment Part No. Unit MSRPHarley-Davidson FLH 1993-2013

HD90-012BKC Pair $65.95

Harley-Davidson FLH 2014 - HD90-013BKC Pair $65.95Victory Cross Models V30-103BKC Pair $65.95

3500 Large Trunk Liner Bag For Harley FLHThis Hopnel™ 3500 Trunk Liner Bag for the Harley FLH features over 2 cubic feet of storage. This 23" x 16" x 9½" Trunk Liner Bag maximizes trunk space, while the convenient carry handles allow you to load your trunk quickly and easily. A unique double zipper makes packing and access extremely simple from the top or from the side. By using the side zipper, the Trunk Liner Bag opens the full side profile of the bag to allow maximum suitcase style packing. An additional six inch double sided top zipper provides a handy top flap allowing access to special items without having to unpack the whole bag. Comes with carry handles and side pocket. Designed for use with Harley FLH trunks, but also fits the Indian Roadmaster and Honda Goldwing GL1500.

Fitment Dimensions Part No. Unit MSRP

Harley FLH Tour Trunks

23” x 16” x 9 ½” HDTL Each $29.95

2750 Trunk Liner Bag For Victory Cross CountryHopnel™ creates another must have accessory with a new 2750 Trunk Liner Bag for the Victory Cross Country. This 20" x 17½" x 8" Trunk Liner Bag allows you to fill the unique shape of the Victory trunk quickly and efficiently. A full length zippered top makes packing and retrieving items simple and convenient. In addition to the generous main storage area is a separate 8" x 12" zippered compartment allowing quick access to personal items. Designed for use with Victory Cross Country Trunks.

Fitment Dimensions Part No. Unit MSRP

Victory Cross Country Trunks

20’’ x 17 ½“x 8’’ HVTL Each $29.95

1900 Saddlebag Liner for Victory CrossHopnel™ Saddlebag Liners for the Victory Cross models are made from durable polyurethane backed polyester. These liners will not wear out and will provide excellent weather resistance to protect what is inside. The generous 23¾" long compartment has a double sided top zipper allowing quick and easy access to its 7" width for packing. Its sturdy 2" wide carry handles join together with a leather loop for a secure closure and effortless handling. Fits 2010 and newer hard bags as used on the Victory Cross models. Measures 23¾" x 12" x 7".

Fitment Part No. Unit MSRPVictory Cross Models 2010 - HVSL Each $32.95

Black Classic Dual Pouch For Harley FLHEnhance your on-bike storage and convenience with the Black Classic Dual Pouch. The dual pouch design also allows air to pass through new vented Harley fairings unobstructed. Mounting easily to the windshield, pouches are secured by the compression between the windshield and fairing. Included are two large pieces of hook and loop attachments to allow even more pouch stability. Measuring 4½" x 3" x 1½", these pouches are a perfect place for a garage opener, phone or other smaller items you want readily available. Made in the USA.Fitment Part No. Unit MSRPHarley FLH 1996 to current HD90-102BC Pair $39.95

Hide A Key PouchThis great little Hopnel™ pouch allows you hide an extra key on your bike and keep it clean and ready to use should you need it. A 6" hook and loop strap provides a secure fit that will not give way, even under the harshest conditions. The pouch is 3½" in length and 2¼" in width to easily accommodate the largest key we could find. Made from weather resistant marine vinyl. Universal use. Made in the USA. Fitment Part No. Unit MSRPUniversal HPKP Each $8.95

HD90-013BKC

V30-103BKC

HDTL HVTL

HD90-102BC

HVSL

HPKP

8 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

T U X E D O T I E S + W I N D S H I E L D S + C L E A N E R / P O L I S H

Hopnel™ Black Classic Tuxedo Ties for VictoryA Hopnel™ Tuxedo Tie enhances the wide Victory gas tank and provides wear and scratch protection. Black Classic Tuxedo Ties come with a generous 7¼" x 4½" x 1½" storage pouch that easily accommodates your cell phone behind a clear pocket and stores other items you need handy in the main pouch. The pouch can be easily removed using Big Bike Parts® EZ Lock™ mount. Simply twist and replace with numerous other optional accessories, including: Hopnel™ Map Pouch # H50-01BLT, Beverage Holder # HD90-112BEV, and EZ Carry™ Conceal Carry # H50-111CCP & # H50-112CCP. Attaches securely under the seat by removing two bolts, and under the gas cap with three bolts. Made in the USA. Fitment Part No. Unit MSRPVictory Cross Countryand Cross Roads 2010-

V30-101BKC Each $59.95

Victory Cruisers Vegas, Kingpin, Judge, Boardwalk, etc

V30-102BKC Each $59.95

Adjustable Flip Windshield for GL1800, Harley FLH and Victory Cross CountryBig Bike Parts® market leading Adjustable Flip Baggershield™ Windshield for the GL1800 Goldwing just got taller. A 5" taller Adjustable Flip Windshield is now available for GL1800 Goldwing as well as one for the Harley FLH and Victory Cross Country. These dual use windshields are perfect for a trip around town or quickly turning into a taller touring windshield. A short tinted lower shield provides everyday protection with over the top visibility. With a quick twist of three thumb attachments, you can flip the clear taller panel into place and make a full touring windshield for those times you need it. This versatility makes these windshields a perfect touring or around town choice. Made from 3/16" DOT optically clear Lucite® Acrylic these shields provide years of proven performance. The BBP # 20-127 fits the 2001-2015 Goldwing GL1800 with a low 15" to a raised 25" windshield. The BBP # 20-126 fits the 2010 and newer Victory Cross Country offering a low 12" to a raised 18¼" windshield. The BBP # 20-124 fits the 1996-2013 FLH with a low 7¾" to a raised 11¾" windshield. The BBP # 20-123 fits the 2014 and newer FLH and offer a low 8" to a raised 14" windshield. Made in the USA.Fitment Height Range Part No. Unit MSRPGL1800 Goldwing 2001 & newer 15” to 25” 20-127 Each $235.95Victory Cross Country 2010 & newer 12” to 18¼” 20-126 Each $199.95Harley FLH 1996-2013 7¾” to 11¾” 20-124 Each $169.95Harley FLH 2014 & newer 8” to 14” 20-123 Each $165.95

Windshield Cleaner and PolishAs a windshield manufacturer for all types of motorcycles Big Bike Parts® knows what it takes to keep windshields performing at their best, by keeping them clear and clean. When customers asked Big Bike Parts® what windshield cleaner and polish they use, the answer was simple. After testing several cleaners extensively, Big Bike Parts® found Slipstreamer’s plastic cleaner and polish to be the top performer due to its rich cream that easily cleans and restoring the optical clarity of plastics. Its ease of use on all plastic surfaces, especially windshields, brings back the new luster so often lost with many other cleaners.

Fitment Part No. Unit MSRP7 oz. Bottle 4-137 Each $10.95

V30-101BKC

V30-102BKC

20-123

20-124

20-126

20-127

Touring / Bagger / Cruiser Accessories

4-137

9N e w P r o d u c t C a t a l o g S u p p l e m e n t • w w w . b i g b i k e p a r t s . c o m • E - m a i l i n f o @ b i g b i k e p a r t s . c o m

D R I V I N G L I G H T K I T S + H E A D L I G H T P R O T E C T I O N

Increased Visibility For Yamaha VenturesNew lights bar for the Yamaha Royal Star Venture 1999-2012. Bright 3½” 55 Watt Halogen lights are available with Big Bike Parts® Elliptical or Contour styling. The Elliptical chrome light bar is made from formed steel. The light weight Contour light bar is made from CNC forged aluminum. Both light bars have turn signal relocation access below the driving lights for either OEM or custom turn signal relocation mount kits sold separately. Includes mounting bracket to remount the OEM fork deflectors. Fitment Part No. Unit MSRPElliptical 3½” Halogen Light Bar 61-115 Kit $269.95Contours 3½” Halogen Light Bar 61-116 Kit $329.95

Driving Light Kit For Victory Cross Country Halogen or LEDThis compact driving light mount for the Victory Cross Country and Magnum models. Positioned in-line with the headlight for a true driving light experience, these mounts provide a clean look by attaching to the existing turn signal mounts. Available with either 3½" 55 watt visored Halogen or LED lights, or as mounts only, to use with existing lights. These 3½" light housings are Big Bike Parts® market leading steel housing with a built in visor on the bezel creating that pure custom look. Big Bike Parts® 3½" Halogen or LED Spot lights come complete with wiring and custom switch for the Victory fairing.

Fitment Part No. Unit MSRP3½” 55 W Halogen Driving Light 30-101 Kit $179.953½” LED Spot Light 30-101L Kit $359.95Mounting Bracket Only 30-101X Kit $69.95

Driving Light For HarleyBig Bike Parts® driving light kit for the 1996 and newer Harley FLH mounts to the turn signal bracket attached to the front fork. These Show Chrome Accessories® light kits include steel mounts, wire harness and a relay switch to isolate from the FLH electrical systems. Available with your choice of 3½" 55 watt Halogen Lights or 3½" LED High Intensity Lights, both come in our industry leading 3½" chrome visored light housing. The LED version features dual high intensity LEDs in each driving light.

Fitment Part No. Unit MSRP3½” LED High Intensity Light Kit. Harley FLH 1996 & newer

91-312L Kit $369.95

3½” Halogen Light Kit. Harley FLH 1996 and newer

91-312 Kit $239.95

Driving Light Mounting Bracket Only. Harley FLH 1996-2015

91-312X Kit $89.95

91-312L

91-312L

91-312

30-101L

30-101L

30-101

61-116

61-115

7" Round LampGardTM

LampGard™ protection is now available for 7" cruiser headlights. Made from clear acrylic, these headlight protectors can take a beating from rocks and other road debris without reducing headlight luminance. Fits most 7" round headlights with a shallow curve, such as: 1960-2015 Harleys; Yamaha V-Stars, Road Star, Royal Star; Honda VT600, VT750, VT1100; Kawasaki VN 900, VN1500; and Suzuki VL 800, VL 1500, C50, C90, with a single bulb. Made in the USA. Fitment Part No. Unit MSRP

Fits most 7” round headlights with a shallow curve

91-311 Ea $24.95

91-311

10 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

F O G L I G H T S + C H R O M E L O W E R C O W L + S C U F F P A D S + S E A T B O L T S

Lower Cowl with Rectangular Knockouts for GL1800Add a brilliant chrome lower cowl matching the GL1800 Goldwing styling for 2012 and later models. This new Show Chrome Accessories® lower cowl is made with the same exceptional quality Goldwing riders have come to know from Big Bike Parts®. With rectangular knockout blanks, made for Show Chrome Accessories® LED Rectangular Fog Light Kit, you can ride your GL1800 in style, having that brilliant chrome finish you’ve come to love, while maintaining your original rectangular OEM styling. Upgrade your earlier 2001 through 2010 Goldwing GL1800 to the new Rectangular Lower Cowl Style and combine with Big Bike Parts® LED Fog Lights (BBP # 52-906) to maximize seeing and being seen. Designed with reinforced tabs for a stronger secure fit over OEM and mounts with existing hardware.

Fitment Part No. Unit MSRPHonda Goldwing GL1800 2001-2015 models

52-908 Each $149.95

Saddlebag Scuff PadsThese new Rear Saddlebag Scuff Pads protect your saddlebags from scratches when using helmet hangers on 2012 and newer Goldwings. The unique curved design with custom pattern cut outs add a decorative protective flair to the F6B Goldwing, with Big Bike Parts® popular Soft Carbon Fiber look. Scuff pads measure 4" x 6½" and securely mount with 3M adhesive backing for a no mar installation.

Fitment Part No. Unit MSRPHonda Goldwing 2012 & newer 52-841 Pair $29.95

Tapered Seat Boltsfor GoldwingTired of trying to align your seat bolts every time you remove your seat? New Tapered Seat Bolts from Big Bike Parts® solve this problem once and for all. These custom made bolts with tapered tips are self-aligning and make installing your Goldwing seat as easy as 1, 2, 3, 4. Made from stainless steel allowing easy use year after year. Available in three special kits for your OEM GL1500/GL1800, F6B, and aftermarket GL1500 hooped backrests.Fitment Part No. Unit MSRPTapered Seat Bolt Set. M8 - 1.25 x 75. Fits GL1500/GL1800 Rails

52-842 Set $16.95

Tapered Seat Bolt Set. M8 - 1.25 x 75 & 95mm. Fits F6B Seat

52-843 Set $16.95

Tapered Seat Bolt Set. M8 - 1.25 x 95. Fits GL1500 BBP # 2-37X

52-576 Set $16.95

52-842

LED Driving Fog Light Kit for GL1500Show Chrome Accessories® expands it’s Driving Light Kits for the GL1500 by offering an enhanced LED version along with it's Halogen counterpart. These Driving Light Kits change the lower cowl cornering light on pre 1998 GL1500 Goldwing into true driving fog lights. The new LED version includes two hi-intensity, 750 lumen LEDs, in bright condenser bulbs. True plug and play simplicity easily plugs into existing OEM wiring harness on all GL1500 Goldwing 1988 to 2000. Replace the black rubber moldings with Chrome Trim Accents BBP # 52-573 for a true custom finish.

Fitment Part No. Unit MSRP750 Lumens LED Driving Light Kit. Honda Goldwing GL1500, 1988-2000

52-595L Kit $169.95

Goldwing / Harley Accessories

52-595l

52-595l

52-908

52-908

Exceptional Quality& Service Since 1981

11N e w P r o d u c t C a t a l o g S u p p l e m e n t • w w w . b i g b i k e p a r t s . c o m • E - m a i l i n f o @ b i g b i k e p a r t s . c o m

A R M R E S T + L U G G A G E R A C K S + F E N D E R A C C E N T + F A I R I N G A C C E N T S

Front Fender Tip Accent for Harley FLHBig Bike Parts® adds to its extensive line of accessories for the Harley FLH with an all new Front Fender Accent. This Front Fender Accent brings a nostalgic look to the FLH with this form fitted contoured ABS Chrome Front Fender Accent. Easily attaches with double sided tape to front fender of the 1988 and newer Harley FLH models.

Fitment Part No. Unit MSRPHarley FLH 1988-2015 91-310 Each $29.95

Vantage Six Rail RackA market changing luggage rack to fit Harley Tour Pak® trunks. This Six Rail Vantage Rack has no weld joints, making it truly unique and clean. The use of CNC machining of extruded billet aluminum has enabled Big Bike Parts® to create this fresh design without any welding. The custom extruded aluminum tubes hold the rails in place with blind screws from below enhancing its clean design. The mounting feet are also bottom mounted with threaded studs that eliminate the need to weld. The spacing of the feet is designed to match most existing tubular racks such as BBP’s # 91-306, making the Vantage Rack an easy update on almost any Harley. Big Bike Parts® includes it’s special angled stainless steel leg washers that properly secure the feet to the trunk lid and minimize the pressure that causes trunk lid cracking. The Vantage Rack is designed to clear the OEM spoiler, Big Bike Parts® has Rack Risers BBP # 52-837 for clearing other spoilers or accessories, if needed. Available in either bright chrome or anodized black finish.Fitment Part No. Unit MSRP

Chrome Vantage Rack for Harley FLH & FLT Tour Paks

91-307 Each $179.95

Black Anodized Vantage Rack for Harley FLH & FLT Tour Paks

91-307BK Each $179.95

Tour Rack Riser Kit. ⅝” Riser Leg Extension Fits Show Chrome Accessories® Rack Washers. Fits ½” Tubing. Set of 4

52-837 Set $22.95

Deluxe Passenger Armrest SystemBig Bike Parts® brings its market leading Passenger Armrest system to the Harley FLH. The armrest system mounts securely to the existing Harley Tour Pak® with four bolts. A unique slotted assembly allows the armrest to be mounted with a 1" forward or backward position. The armrest can easily swing out of the way allowing use of the quick release Harley Tour Pak®. The base mount assembly is black powder coat and the mounting arms are Show Chrome Accessories® brilliant chrome finish. The use of Big Bike Parts® standardized armrest plates allows mounting of our Armrest Beverage Holder # 52-836, Armrest Phone Holder # 52-840 or Armrest Pouch # H18ARCBK.

Fitment Part No. Unit MSRP

For Harley FLH Passenger Tour Pak 2014-

91-313 Kit $259.95

91-307

91-307BK 52-837

Fairing Vent Trim for Harley FLHX and FLHTImprove the look of the new vented Harley batwing fairing with two all new accessories. Show Chrome Accessories® brilliant chrome Fairing Vent Trim easily replaces the OEM black vent trim for a custom appearance. Use Show Chrome Accessories® chrome stainless steel honeycomb screen to keep road bugs and grime out of your cockpit. The honeycomb screen can be mounted with the OEM vent trim or combined with Big Bike Parts® new chrome Fairing Vent Trim. Designed for the 2014 & newer batwing fairing vent as used on the FLHX and FLHT models. Sold separately or together as a kit.Fitment Part No. Unit MSRPChrome Fairing Vent with Screen. Harley FLHX / FLHT 2014 & newer

91-308WS Kit $65.95

Chrome Fairing Vent Trim Only. Harley FLHX / FLHT 2014 & newer

91-308 Each $39.95

Fairing Vent Screen Only. Harley FLHX / FLHT 2014 & newer

91-309 Each $25.95

91-308

91-308WS

91-309

Posi-Lock™ Fasteners For Harley SaddlebagsKeep your Saddlebags secured. The U-Clip Nut provides a great anti-theft feature by preventing the removal of the saddlebag using a wrench or pliers. The 1½" black knob makes attachment and removal easy and insures your installed saddlebags stay in place. These Posi-Lock™ Fasteners are sold as a set of 4.

Fitment Part No. Unit MSRPHarley FLH & FLT Saddlebags 1995 & newer

91-314 Set $17.95

91-313

91-310

91-314

12 T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )T o l l F r e e D e a l e r O r d e r L i n e 1 - 8 0 0 - 8 2 6 - 2 4 1 1 • C o n s u m e r I n q u i r y L i n e 1 - 8 8 8 - B I G - B I K E ( 1 - 8 8 8 - 2 4 4 - 2 4 5 3 )

A I R D E F L E C T O R S + C O W L B R A + L E D L I G H T I N G + M U D F L A P + B R A K E P E D A L

Air Deflectors For Can-Am RTBig Bike Parts®, the market leader in Can-Am RT Accessories introduces two new Air Deflectors for 2010 and newer. These Above and Below Mirror Air Deflectors are a must have comfort accessory. They easily mount to the existing OEM deflectors by attaching chrome hardware that essentially extends the OEM deflectors to air deflectors that really work. Control air flow by pivoting deflectors up to 130 degrees to divert air directly into or away from the riding pocket. The Above Mirror Air Deflectors are 4" x 7" while the Below Mirror Air Deflectors are 5" x 6", both made from clear acrylic to match the OEM.

Fitment Part No. Unit MSRPAbove Mirror Air Deflector. Can-Am RT 2010 & newer

41-177 Pair $85.95

Below Mirror Air Deflector. Can-Am RT 2010 & newer

41-178 Pair $105.95

Rear Mudflap Extension Accent For Can-Am RTThis Rear Mudflap Extension Accent looks so natural on the Can-Am RT it should be a stock accessory. Big Bike Parts® Mudflap Extension Accent extends the OEM rear mudflap by 5", minimizing debris kick up to following riders and is a must have when pulling a trailer to reduce chipping. A decorative chrome accent makes the OEM fender and Mudflap Extension Accent look as one. Attaches easily with double sided tape and 2 screws. Works with most trailer hitches, including BBP # 41-164 Hitch.

Fitment Part No. Unit MSRPCan-Am RT 2010 & newer 41-166 Each $109.95

Multi-Function LED Trunk Light for Can-Am RTThis new Multi-Function LED Trunk Light offers running light, brake light and turn signal functionality in a single compact unit. It uses small ultra-efficient high intensity LEDs offering superb brightness with low power usage. The LED assemblies are enclosed in sealed weather resistant pods to provide maintenance free all-weather protection. The stylish contoured chrome housing mounts low to allow for luggage racks. Attaches with double sided tape for a secure installation. Requires drilling to run the wire lead which connects to existing wiring with T-Taps, no additional components are needed. Fitment Part No. Unit MSRPCan-Am RT 2010 & newer 41-172 Kit $199.95

Front Cowl & Trunk Bra Set For Can-Am RTHopnel™ expands its popular Can-Am RT Trunk Bra Set to include 2010-2013 models. This attractive, finish saving accessory is designed to reduce the nicks, chips, and bugs that pummel the front cowl and front trunk of the Can-Am RT. This two piece set has a tailored bra for the front trunk and another tailored sewn wrap for the front lower intake cowl. The Front Cowl and Trunk Bra Set greatly reduces the road rash the Can-Am RT takes, and provides a clean blacked-out look to the front cowl without covering the chrome. Both the upper and lower bras wrap into the front trunk lip and are held securely in place with special adhesive backed hook and stitched loop. Available in black and made in the USA. Fitment Part No. Unit MSRPFront Cowl and Trunk Bra Set.Can-Am RT 2010-2013

H41-158BK Set $39.95

Front Cowl and Trunk Bra Set.Can-Am RT 2014 & newer

H41-157BK Set $39.95

LED Visibility Brings Safety to Can-Am Front EndReplace the OEM front reflectors with custom ultra-efficient high intensity LEDs offering superb brightness in a reflector that includes running and turn signal functionality. Replace the OEM front fender center reflectors with Big Bike Parts® amber Multi-Function Front Fender Center LED Lights housing 32 SMD LEDs. Replace the OEM front fender rear facing reflectors with red Multi-Function Front Fender Rear Facing LED Light housing 24 SMD LEDs. The LED assemblies are sealed for maintenance free all-weather protection. No drilling required. Connects to existing wiring with T-Taps, no additional components are needed. Fits all Can-Am Spyder RS-S, ST-S, RT-S, ST-LTD, RT-LTD 2013 and newer.

Full Size Brake Pedal For Can-Am SpyderFull Size Brake Pedal replaces the OEM brake pedal cover with a larger 4½" long by 2" wide pedal cover. It mounts the same as the existing OEM brake pedal cover with a rust proof steel channel reinforcing the high density rubber pad. This larger brake pedal cover allows a more comfortable use of the brake pedal without your foot constantly falling off. Fits all Can-Am Spyder models.

Fitment Part No. Unit MSRPMulti-Function Front Fender Center LED Lights

41-173 Pair $149.95

Multi-Function Front Fender Rear Facing LED Lights

41-174 Pair $129.95Fitment Part No. Unit MSRPCan-Am Spyder RT/RS/ST/GS/F3 41-179 Each $29.95

Can-Am Accessories


Recommended