+ All Categories
Home > Documents > Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting...

Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting...

Date post: 31-Jan-2018
Category:
Upload: donguyet
View: 218 times
Download: 0 times
Share this document with a friend
10
2 2/8 Lighting Technology Zones 1&2; 21&22 Catalogue number logic Light Fittings for Fluorescent Lamp BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC -NEC Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Single or dual lamp versions Available lamp and power Fluorescent lamps: 18W x 1, 36W x 1, 58W x 1, 18W x 2, 36W x 2, 58W x 2. LED lamps: 9W x 1, 9W x 2, 18W x 1, 18W x 2. The glass tube stands 4J impact. Enclosure in copper-free aluminium, powder coated surface, yellow (RAL1021). Electronic ballast, wide voltage range, rapid starting, stable performance, power factor0.95. End of lamp life (EOL) rectification effect protection. Class I, Zone 1 and Zone 2 Class I, Division 1, Groups A, B, C, D BAY51-x L: pole type X: ceiling type J: Emergency lighting (optional) Mounting Lamp number Lamp power (W) LED: Only for LED lamp Explosion-proof light fittings for fluorescent lamp http:// www.waromgroup.com General Catalogue 01.01.2013
Transcript
Page 1: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

22

2/8

Lighting Technology

2/9

Zones 1&2; 21&22

■ Catalogue number logic

Selection table

BAY51-18 x 1X

BAY51-18 x 1L

BAY51-36 x 1X

BAY51-36 x 1L

BAY51-58 x 1X

BAY51-58 x 1L

18 x 1

18 x 1

36 x 1

36 x 1

58 x 1

58 x 1

5.60

6.50

8.80

9.30

10.40

10.85

BAY51-18 x 2X

BAY51-18 x 2L

BAY51-36 x 2X

BAY51-36 x 2L

BAY51-58 x 2X

BAY51-58 x 2L

18 x 2

18 x 2

36 x 2

36 x 2

58 x 2

58 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

10.60

11.55

16.30

16.85

18.30

19.20

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for

Fluorescent Lamp

Explosion protection to

-CENELEC

-IEC

-NEC

Can be used in

Zone 1 and Zone 2

Zone 21 and Zone 22

Single or dual lamp versions

Available lamp and power

Fluorescent lamps: 18W x 1, 36W x 1, 58W x 1,

18W x 2, 36W x 2, 58W x 2.

LED lamps: 9W x 1, 9W x 2, 18W x 1, 18W x 2.

The glass tube stands 4J impact.

Enclosure in copper-free aluminium, powder coated surface,

yellow (RAL1021).

Electronic ballast, wide voltage range, rapid starting, stable

performance, power factor≥0.95.

End of lamp life (EOL) rectification effect protection.

Class I, Zone 1 and Zone 2

Class I, Division 1, Groups A, B, C, D

BAY51-□ □ x □ □ □

L: pole type

X: ceiling type

J: Emergency lighting (optional)

Mounting

Lamp number

Lamp power (W)

LED: Only for LED lamp

Explosion-proof light fittings for fluorescent lamp

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/15~16).

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-□x1□ BAY51-□x2□

Φ100

Φ100

http:// www.waromgroup.comGeneral Catalogue 01.01.2013http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof light fittings for fluorescent lamp BAY51-□x□□

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Ballast

Wire guard (optional)

Exposed fastener

Lamp

Lamp brand

Lamp power (W)

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Cable entries

Single lamp

Dual lamp

Cable gland (optional)

LCIE 09 ATEX 3046; IECEx CQM 12.0042X; FM (USA); POCC CN. 05.B03637(Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021)

Toughened glass, stands 4J impact

Electronic ballast

Powder coated carbon steel (white) or stainless steel

Stainless steel

PHILIPS T8 (supplied with the light fittings)

18W x 1 18W x 2

36W x 1 36W x 2

58W x 1 58W x 2

100~300V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-20℃~+55℃ (-60℃~+55℃)23 x 1.5~4mm (L+N+PE)

2 x M25 x 1.5 Plug

2 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

ГБ

II 2 G Ex d IIC T6 Gb Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66 Ex t IIIC T80℃ Db IP66

Page 2: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

22

2/8

Lighting Technology

2/9

Zones 1&2; 21&22

■ Catalogue number logic

Selection table

BAY51-18 x 1X

BAY51-18 x 1L

BAY51-36 x 1X

BAY51-36 x 1L

BAY51-58 x 1X

BAY51-58 x 1L

18 x 1

18 x 1

36 x 1

36 x 1

58 x 1

58 x 1

5.60

6.50

8.80

9.30

10.40

10.85

BAY51-18 x 2X

BAY51-18 x 2L

BAY51-36 x 2X

BAY51-36 x 2L

BAY51-58 x 2X

BAY51-58 x 2L

18 x 2

18 x 2

36 x 2

36 x 2

58 x 2

58 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

10.60

11.55

16.30

16.85

18.30

19.20

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for

Fluorescent Lamp

Explosion protection to

-CENELEC

-IEC

-NEC

Can be used in

Zone 1 and Zone 2

Zone 21 and Zone 22

Single or dual lamp versions

Available lamp and power

Fluorescent lamps: 18W x 1, 36W x 1, 58W x 1,

18W x 2, 36W x 2, 58W x 2.

LED lamps: 9W x 1, 9W x 2, 18W x 1, 18W x 2.

The glass tube stands 4J impact.

Enclosure in copper-free aluminium, powder coated surface,

yellow (RAL1021).

Electronic ballast, wide voltage range, rapid starting, stable

performance, power factor≥0.95.

End of lamp life (EOL) rectification effect protection.

Class I, Zone 1 and Zone 2

Class I, Division 1, Groups A, B, C, D

BAY51-□ □ x □ □ □

L: pole type

X: ceiling type

J: Emergency lighting (optional)

Mounting

Lamp number

Lamp power (W)

LED: Only for LED lamp

Explosion-proof light fittings for fluorescent lamp

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/15~16).

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-□x1□ BAY51-□x2□

Φ100

Φ100

http:// www.waromgroup.comGeneral Catalogue 01.01.2013http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof light fittings for fluorescent lamp BAY51-□x□□

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Ballast

Wire guard (optional)

Exposed fastener

Lamp

Lamp brand

Lamp power (W)

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Cable entries

Single lamp

Dual lamp

Cable gland (optional)

LCIE 09 ATEX 3046; IECEx CQM 12.0042X; FM (USA); POCC CN. 05.B03637(Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021)

Toughened glass, stands 4J impact

Electronic ballast

Powder coated carbon steel (white) or stainless steel

Stainless steel

PHILIPS T8 (supplied with the light fittings)

18W x 1 18W x 2

36W x 1 36W x 2

58W x 1 58W x 2

100~300V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-20℃~+55℃ (-60℃~+55℃)23 x 1.5~4mm (L+N+PE)

2 x M25 x 1.5 Plug

2 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

ГБ

II 2 G Ex d IIC T6 Gb Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66 Ex t IIIC T80℃ Db IP66

Page 3: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

22

2/10 2/11

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Technical data

Explosion-proof emergency light fittings for fluorescent lamp BAY51-□x□□J

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Emergency unit

Ballast

Wire guard (optional)

Exposed fastener

Lamp

Lamp brand

Lamp power (W)

Emergency power (W)

Emergency start time

Charge time

Emergency lighting time

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Cable entries

Cable gland (optional)

II 2 G Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66

LCIE 13 ATEX_____; IECEx CQM 13.0004X; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021)

Toughened glass, stands 4J impact

Special emergency controller and NI-MH battery pile, with protection against over

charge and over discharge

Electronic ballast

Powder coated carbon steel (white) or stainless steel

Stainless steel

PHILIPS T8 (supplied with the light fittings)

18W x 2, 36W x 2, 58W x 2

18W x 1, 36W x 1, 58W x 1

0.3s

24h

120min (180min is optional)

100~300V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-20℃~+55℃23 x 1.5~4mm (L+N+PE)

4 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

We can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation on request.

Photometric data (BAY51-□x□□, BAY51-□x□□J)

18W x 1 photometric data

Rated luminous flux:1050lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

192

190

187

186

186

182

174

168

155

140

Angle

50

55

60

65

70

75

80

85

90

CP

127

115

105

82

32

0

0

0

0

18W x 2 photometric data

Rated luminous flux:2100lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

402

400

395

397

390

387

380

375

356

345

Angle

50

55

60

65

70

75

80

85

90

CP

328

302

280

254

212

133

58

0

0

36W x 1 photometric data

Rated luminous flux:2500lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

417

415

412

410

405

405

405

400

385

370

Angle

50

55

60

65

70

75

80

85

90

CP

350

312

280

235

205

149

90

0

0

36W x 2 photometric data

Rated luminous flux:5000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

895

897

889

881

880

875

865

845

805

775

Angle

50

55

60

65

70

75

80

85

90

CP

740

682

615

550

465

330

176

0

0

58W x 1 photometric data

Rated luminous flux:4000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

690

688

680

675

665

660

656

640

620

595

Angle

50

55

60

65

70

75

80

85

90

CP

555

502

465

420

372

294

190

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

1447

1445

1436

1427

1430

1420

1390

1350

1290

1250

Angle

50

55

60

65

70

75

80

85

90

CP

1197

1085

985

880

725

525

365

0

0

58W x 2 photometric data

Rated luminous flux:8000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Selection table

BAY51-18 x 2XJ

BAY51-18 x 2LJ

BAY51-36 x 2XJ

18 x 2

18 x 2

36 x 2

14.50

14.60

20.20

BAY51-36 x 2LJ

BAY51-58 x 2XJ

BAY51-58 x 2LJ

36 x 2

58 x 2

58 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

20.30

22.20

22.30

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/17).

http:// www.waromgroup.comGeneral Catalogue 01.01.2013http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-□x2□J

575(18W)1185(36W)1487(58W)

970(18W)1570(36W)1878(58W)

250

Φ2

10

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

Page 4: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

22

2/10 2/11

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

Technical data

Explosion-proof emergency light fittings for fluorescent lamp BAY51-□x□□J

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Emergency unit

Ballast

Wire guard (optional)

Exposed fastener

Lamp

Lamp brand

Lamp power (W)

Emergency power (W)

Emergency start time

Charge time

Emergency lighting time

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Cable entries

Cable gland (optional)

II 2 G Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66

LCIE 13 ATEX_____; IECEx CQM 13.0004X; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021)

Toughened glass, stands 4J impact

Special emergency controller and NI-MH battery pile, with protection against over

charge and over discharge

Electronic ballast

Powder coated carbon steel (white) or stainless steel

Stainless steel

PHILIPS T8 (supplied with the light fittings)

18W x 2, 36W x 2, 58W x 2

18W x 1, 36W x 1, 58W x 1

0.3s

24h

120min (180min is optional)

100~300V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-20℃~+55℃23 x 1.5~4mm (L+N+PE)

4 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

We can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation on request.

Photometric data (BAY51-□x□□, BAY51-□x□□J)

18W x 1 photometric data

Rated luminous flux:1050lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

192

190

187

186

186

182

174

168

155

140

Angle

50

55

60

65

70

75

80

85

90

CP

127

115

105

82

32

0

0

0

0

18W x 2 photometric data

Rated luminous flux:2100lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

402

400

395

397

390

387

380

375

356

345

Angle

50

55

60

65

70

75

80

85

90

CP

328

302

280

254

212

133

58

0

0

36W x 1 photometric data

Rated luminous flux:2500lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

417

415

412

410

405

405

405

400

385

370

Angle

50

55

60

65

70

75

80

85

90

CP

350

312

280

235

205

149

90

0

0

36W x 2 photometric data

Rated luminous flux:5000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

895

897

889

881

880

875

865

845

805

775

Angle

50

55

60

65

70

75

80

85

90

CP

740

682

615

550

465

330

176

0

0

58W x 1 photometric data

Rated luminous flux:4000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

690

688

680

675

665

660

656

640

620

595

Angle

50

55

60

65

70

75

80

85

90

CP

555

502

465

420

372

294

190

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

1447

1445

1436

1427

1430

1420

1390

1350

1290

1250

Angle

50

55

60

65

70

75

80

85

90

CP

1197

1085

985

880

725

525

365

0

0

58W x 2 photometric data

Rated luminous flux:8000lm;

The data from PHILIPS lamp;

Luminous intensity distribution cd/1000lm

Selection table

BAY51-18 x 2XJ

BAY51-18 x 2LJ

BAY51-36 x 2XJ

18 x 2

18 x 2

36 x 2

14.50

14.60

20.20

BAY51-36 x 2LJ

BAY51-58 x 2XJ

BAY51-58 x 2LJ

36 x 2

58 x 2

58 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

20.30

22.20

22.30

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/17).

http:// www.waromgroup.comGeneral Catalogue 01.01.2013http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-□x2□J

575(18W)1185(36W)1487(58W)

970(18W)1570(36W)1878(58W)

250

Φ2

10

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

0

40

90°

60°

30°

80

120

160

200

Page 5: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51- LED□x2□J

575(9W)1185(18W)

970(9W)1570(18W)

250

Φ2

10

2

2/12

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof LED light fittings for fluorescent lamp BAY51-LED □x□□

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Power controller

Wire guard (optional)

Exposed fastener

Lamp

Lamp specification

Lamp power (W)

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Mounting

Cable entries

Single lamp

Dual lamp

Cable gland

II 2 G Ex d IIC T6 Gb

II 2 D Ex t IIIC T80℃ Db IP66

LCIE 11 ATEX 3112X; IECEx CQM 12.0005; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021).

Toughened glass, stands 4J impact.

Wide voltage input, CC-CV (constant current - constant voltage) output, power factor

≥0.98, with function of distributed current, constant current, surge-proof and anti-

electromagnetic interference, and protection against overcurrent, open circuit, and

short circuit.

Powder coated carbon steel (white) or stainless steel

Stainless steel

CREE plural white LED modules (supplied with the light fittings)

9W x 1, 9W x 2, 18W x 1, 18W x 2

110~265V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-40℃~+55℃2 3 x 1.5~4mm (L+N+PE)

Ceiling type, pole type

2 x M25 x 1.5 Plug

2 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

Selection table

BAY51-LED 9 x 1X

BAY51-LED 9 x 1L

BAY51-LED 9 x 2X

BAY51-LED 9 x 2L

9 x 1

9 x 1

9 x 2

9 x 2

5.50

5.90

9.80

10.50

BAY51-LED 18 x 1X

BAY51-LED 18 x 1L

BAY51-LED 18 x 2X

BAY51-LED 18 x 2L

18 x 1

18 x 1

18 x 2

18 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

8.30

8.35

15.70

16.40

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/15~16).

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-LED□x1□ BAY51-LED□x2□

Φ10

0 Φ10

0

2

2/13

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof emergency LED light fittings for fluorescent lamp BAY51-LED □x□□J

Selection table

BAY51-LED 9 x 2XJ

BAY51-LED 9 x 2LJ

9 x 2

9 x 2

13.70

13.80

BAY51-LED 18 x 2XJ

BAY51-LED 18 x 2LJ

18 x 2

18 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

19.40

19.50

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/17).

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Power controller

Emergency unit

Wire guard (optional)

Exposed fastener

Lamp

Lamp specification

Lamp power (W)

Emergency power (W)

Emergency start time

Charge time

Emergency lighting time

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Mounting

Cable entries

Cable gland

II 2 G Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66

LCIE 13 ATEX ; IECEx; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2011, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021).

Toughened glass, stands 4J impact.

Wide voltage input, CC-CV (constant current - constant voltage) output, power factor

≥0.98, with function of distributed current, constant current, surge-proof and anti-

electromagnetic interference, and protection against overcurrent, open circuit, and

short circuit.

Special emergency controller and NI-MH battery pile, with protection against over

charge and over discharge

Powder coated carbon steel (white) or stainless steel

Stainless steel

CREE plural white LED modules (supplied with the light fittings)

9W x 2, 18W x 2

9W x 1, 18W x 1

0.3s

24h

120min (180min is optional)

110~265V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-40℃~+55℃2 3 x 1.5~4mm (L+N+PE)

Ceiling type, pole type

4 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

Page 6: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51- LED□x2□J

575(9W)1185(18W)

970(9W)1570(18W)

250

Φ2

10

2

2/12

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof LED light fittings for fluorescent lamp BAY51-LED □x□□

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Power controller

Wire guard (optional)

Exposed fastener

Lamp

Lamp specification

Lamp power (W)

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Mounting

Cable entries

Single lamp

Dual lamp

Cable gland

II 2 G Ex d IIC T6 Gb

II 2 D Ex t IIIC T80℃ Db IP66

LCIE 11 ATEX 3112X; IECEx CQM 12.0005; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021).

Toughened glass, stands 4J impact.

Wide voltage input, CC-CV (constant current - constant voltage) output, power factor

≥0.98, with function of distributed current, constant current, surge-proof and anti-

electromagnetic interference, and protection against overcurrent, open circuit, and

short circuit.

Powder coated carbon steel (white) or stainless steel

Stainless steel

CREE plural white LED modules (supplied with the light fittings)

9W x 1, 9W x 2, 18W x 1, 18W x 2

110~265V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-40℃~+55℃2 3 x 1.5~4mm (L+N+PE)

Ceiling type, pole type

2 x M25 x 1.5 Plug

2 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

Selection table

BAY51-LED 9 x 1X

BAY51-LED 9 x 1L

BAY51-LED 9 x 2X

BAY51-LED 9 x 2L

9 x 1

9 x 1

9 x 2

9 x 2

5.50

5.90

9.80

10.50

BAY51-LED 18 x 1X

BAY51-LED 18 x 1L

BAY51-LED 18 x 2X

BAY51-LED 18 x 2L

18 x 1

18 x 1

18 x 2

18 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

8.30

8.35

15.70

16.40

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/15~16).

Dimension drawings (all dimensions in mm) - subject to alteration

BAY51-LED□x1□ BAY51-LED□x2□

Φ10

0 Φ10

0

2

2/13

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Technical data

Explosion-proof emergency LED light fittings for fluorescent lamp BAY51-LED □x□□J

Selection table

BAY51-LED 9 x 2XJ

BAY51-LED 9 x 2LJ

9 x 2

9 x 2

13.70

13.80

BAY51-LED 18 x 2XJ

BAY51-LED 18 x 2LJ

18 x 2

18 x 2

Type/Ordering code Lamp power(W) Weight(kg) Type/Ordering code Lamp power(W) Weight(kg)

19.40

19.50

Note: Products above include all the mounting accessories listed in Mounting Accessories & Spare Parts Table (see P2/17).

Explosion protection

Gas explosion protection

Dust explosion protection

Certificates

Conformity to standards

Material

Enclosure

Glass tube

Power controller

Emergency unit

Wire guard (optional)

Exposed fastener

Lamp

Lamp specification

Lamp power (W)

Emergency power (W)

Emergency start time

Charge time

Emergency lighting time

Rated voltage

Earthing protection

Degree of protection

Ambient temperature

Terminal

Mounting

Cable entries

Cable gland

II 2 G Ex d IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66

LCIE 13 ATEX ; IECEx; FM (USA); GOST.R (Russia)

EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009

IEC 60079-0: 2011, IEC 60079-1: 2007, IEC 60079-31: 2008

Copper-free aluminium, powder coated surface, yellow (RAL1021).

Toughened glass, stands 4J impact.

Wide voltage input, CC-CV (constant current - constant voltage) output, power factor

≥0.98, with function of distributed current, constant current, surge-proof and anti-

electromagnetic interference, and protection against overcurrent, open circuit, and

short circuit.

Special emergency controller and NI-MH battery pile, with protection against over

charge and over discharge

Powder coated carbon steel (white) or stainless steel

Stainless steel

CREE plural white LED modules (supplied with the light fittings)

9W x 2, 18W x 2

9W x 1, 18W x 1

0.3s

24h

120min (180min is optional)

110~265V AC 50/60Hz

M5 (internal & external earth bolts)

IP66

-40℃~+55℃2 3 x 1.5~4mm (L+N+PE)

Ceiling type, pole type

4 x M25 x 1.5 Plug

DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P7/20~25.

Page 7: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

2

2/14

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

2

2/15

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Photometric data (BAY51-LED□ x □□, BAY51-LED□ x □□J)

Angle

0

5

10

15

20

25

30

35

40

45

CP

215

210

204

198

187

177

166

154

140

127

Angle

50

55

60

65

70

75

80

85

90

CP

113

100

85

75

60

48

28

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

418

415

410

400

390

375

360

340

320

295

Angle

50

55

60

65

70

75

80

85

90

CP

270

245

220

190

160

115

45

0

0

9W x 1 photometric data

Rated luminous flux:945lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

9W x 2 photometric data

Rated luminous flux:1890lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

405

405

400

396

380

376

362

345

326

306

Angle

50

55

60

65

70

75

80

85

90

CP

282

260

232

202

150

107

63

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

818

817

810

795

775

750

720

680

640

595

Angle

50

55

60

65

70

75

80

85

90

CP

500

500

430

365

303

230

131

0

0

18W x 1 photometric data

Rated luminous flux:1890lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

18W x 2 photometric data

Rated luminous flux:3780lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

We can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation on request.

Mounting type for light fittings with single lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type L: pole type (the pole is provided by user)

4-Φ8.5

Φ40

Φ48

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

90

17

5

Max

.60°2

1

82

62

175

700

1450

3 3

4

5

2

Mounting accessories and spare parts table (light fittings with single lamp tube)

Supplied according to the mounting type

0.07

0.04

0.30~0.50

0.04

0.04

0.04

0.30~0.50

Mounting

type

X: ceiling type

L: pole type

Accessories

Name

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

2

2

1

2

2

2

1

Qty Illustration

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Ordering

code

5136030

51S01X1

51S01X2

5136014

5136012

51S01X1

51S01X2

Weight

(kg)

Note: Accessories not in the table shall be supplied by user.

Φ9

2-Φ10

2-Φ7

Φ9

0

60

90°

60°

30°

120

180

240

0

60

90°

60°

30°

120

180

240

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)

Max.60°

4-Φ14150

200

150

200

140

185 11

262

Page 8: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

2

2/14

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

2

2/15

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Photometric data (BAY51-LED□ x □□, BAY51-LED□ x □□J)

Angle

0

5

10

15

20

25

30

35

40

45

CP

215

210

204

198

187

177

166

154

140

127

Angle

50

55

60

65

70

75

80

85

90

CP

113

100

85

75

60

48

28

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

418

415

410

400

390

375

360

340

320

295

Angle

50

55

60

65

70

75

80

85

90

CP

270

245

220

190

160

115

45

0

0

9W x 1 photometric data

Rated luminous flux:945lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

9W x 2 photometric data

Rated luminous flux:1890lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

Angle

0

5

10

15

20

25

30

35

40

45

CP

405

405

400

396

380

376

362

345

326

306

Angle

50

55

60

65

70

75

80

85

90

CP

282

260

232

202

150

107

63

0

0

Angle

0

5

10

15

20

25

30

35

40

45

CP

818

817

810

795

775

750

720

680

640

595

Angle

50

55

60

65

70

75

80

85

90

CP

500

500

430

365

303

230

131

0

0

18W x 1 photometric data

Rated luminous flux:1890lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

18W x 2 photometric data

Rated luminous flux:3780lm;

The data from CREE lamp;

Luminous intensity distribution cd/1000lm

We can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation on request.

Mounting type for light fittings with single lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type L: pole type (the pole is provided by user)

4-Φ8.5

Φ40

Φ48

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

90

17

5

Max

.60°2

1

82

62

175

700

1450

3 3

4

5

2

Mounting accessories and spare parts table (light fittings with single lamp tube)

Supplied according to the mounting type

0.07

0.04

0.30~0.50

0.04

0.04

0.04

0.30~0.50

Mounting

type

X: ceiling type

L: pole type

Accessories

Name

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

2

2

1

2

2

2

1

Qty Illustration

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Ordering

code

5136030

51S01X1

51S01X2

5136014

5136012

51S01X1

51S01X2

Weight

(kg)

Note: Accessories not in the table shall be supplied by user.

Φ9

2-Φ10

2-Φ7

Φ9

0

60

90°

60°

30°

120

180

240

0

60

90°

60°

30°

120

180

240

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)

Max.60°

4-Φ14150

200

150

200

140

185 11

262

Page 9: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

2

2/17

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Note: Accessories not in the table shall be supplied by user.

Supplied according to the mounting type

Mounting

type

Accessories

Name Qty Illustration

Ordering

code

Weight

(kg)

Mounting accessories and spare parts table (light fittings with dual lamp tube)

X: ceiling type

L: pole type

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

1

1

1

2

1

2

1

11

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Same as ceiling type

5136030

51S01X1

51S01X2

51D01X3

5136014

5136012

51S01X1

51D01X3

51S01X2

0.07

0.04

0.30~0.50

0.13

0.04

0.04

0.04

0.30~0.50

0.13

Φ9

2-Φ10

2-Φ7

Φ9

1

2

2/16

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Mounting type for light fittings with dual lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type L: pole type (the pole is provided by user)

4-Φ8.5

Φ40

Φ48

3

12

6

Mounting type for light fittings with dual lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type (for: BAY51-□×2XJ; BAY51-LED□×2XJ) L: pole type (the pole is provided by user)

(for: BAY51-□×2LJ; BAY51-LED□×2LJ)

1

2

47.5

67.5

175 67.5 6

90

Φ8.5

180

Φ210

3

200150

4-Φ14

200

150

96.5

260

4

5

2

6

3700

1450

Φ40

Φ48

Note: Accessories not in the table shall be supplied by user.

Supplied according to the mounting type

Mounting

type

Accessories

Name Qty Illustration

Ordering

code

Weight

(kg)

Mounting accessories and spare parts table (light fittings with dual lamp tube)

X: ceiling type

L: pole type

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

1

1

1

2

1

2

1

11

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Same as ceiling type

5136030

51S01X1

51S01X2

51D01X3

5136014

5136012

51S01X1

51D01X3

51S01X2

0.07

0.04

0.30~0.50

0.13

0.04

0.04

0.04

0.30~0.50

0.13

Φ9

2-Φ10

2-Φ7

Φ9

1

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

90

180

67.5

67.5

47.5

175

250

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)

Max.

60°

Max.60°

700

1450

4-Φ14150

200

150

200

250

206

96.5

67.5

47.5

4

5

2

6

96.5

67.5

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)

Page 10: Lighting Technology BAY51 Series Explosion-proof Light ... · PDF fileWe can provide lighting design and data by professional lighting software DIALUX based upon simulated site situation

2

2/17

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Note: Accessories not in the table shall be supplied by user.

Supplied according to the mounting type

Mounting

type

Accessories

Name Qty Illustration

Ordering

code

Weight

(kg)

Mounting accessories and spare parts table (light fittings with dual lamp tube)

X: ceiling type

L: pole type

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

1

1

1

2

1

2

1

11

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Same as ceiling type

5136030

51S01X1

51S01X2

51D01X3

5136014

5136012

51S01X1

51D01X3

51S01X2

0.07

0.04

0.30~0.50

0.13

0.04

0.04

0.04

0.30~0.50

0.13

Φ9

2-Φ10

2-Φ7

Φ9

1

2

2/16

Light Fittings for Fluorescent Lamp

BAY51 Series Explosion-proof Light Fittings for Fluorescent Lamp

http:// www.waromgroup.comGeneral Catalogue 01.01.2013

Mounting type for light fittings with dual lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type L: pole type (the pole is provided by user)

4-Φ8.5

Φ40

Φ48

3

12

6

Mounting type for light fittings with dual lamp tube (all dimensions in mm) - subject to alteration

Installation reference

X: ceiling type (for: BAY51-□×2XJ; BAY51-LED□×2XJ) L: pole type (the pole is provided by user)

(for: BAY51-□×2LJ; BAY51-LED□×2LJ)

1

2

47.5

67.5

175 67.5 6

90

Φ8.5

180

Φ210

3

200150

4-Φ14

200

150

96.5

260

4

5

2

6

3700

1450

Φ40

Φ48

Note: Accessories not in the table shall be supplied by user.

Supplied according to the mounting type

Mounting

type

Accessories

Name Qty Illustration

Ordering

code

Weight

(kg)

Mounting accessories and spare parts table (light fittings with dual lamp tube)

X: ceiling type

L: pole type

①.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

④.G1 1/4″Pipe clamp

⑤.Mounting bracket

②.Connector

③.Steel wire rope (with hook)

⑥.Mounting bracket

1

1

1

2

1

2

1

11

Length: 0.7m (18W), 1.3m (36W), 1.6m (58W)

Same as ceiling type

Same as ceiling type

Same as ceiling type

5136030

51S01X1

51S01X2

51D01X3

5136014

5136012

51S01X1

51D01X3

51S01X2

0.07

0.04

0.30~0.50

0.13

0.04

0.04

0.04

0.30~0.50

0.13

Φ9

2-Φ10

2-Φ7

Φ9

1

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

90

180

67.5

67.5

47.5

175

250

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)

Max.

60°

Max.60°

700

1450

4-Φ14150

200

150

200

250

206

96.5

67.5

47.5

4

5

2

6

96.5

67.5

575(18W)(9W/LED)1185(36W)(18W/LED)

1487(58W)

575(18W)(9W/LED)

1185(36W)(18W/LED)

1487(58W)


Recommended