Lincoln Spray systems, chain lubrication and specialty systems
Industry leaderContinually satisfying our customers with the world’s best lubrication equipment and pumping systems has made Lincoln the largest and most successful company in our field. For nearly a century, companies have relied on our technical and quality leader-ship; our world-class manufacturing and customer service, and our vast network of distributors and support facilities.
Research developmentIn order to provide the best worldwide and regional application solutions. Lincoln deve-lops new products and systems at research and development facilities in the United Sta-tes Germany and India
Providing solutionsIndustrial customers in large processing plants, automotive manufacturing, pulp and paper mills, food and beverage and other manufacturing facilities can depend on solutions from Lincoln. For the toughest mobile applications, on the road or in the field, Lincoln protects heavy equipment used in mining, construction, agriculture and over-the-road trucking. In addition, Lincoln offers the best lubrication equip-ment to meet the needs of automotive service professionals.
Complete product lineLincoln supplies automated lubrication systems, pumps and pump stations and top quality lubrication equipment and accessories. Our quality systems in the Czech Republic, Germany, India and United States are ISO 9001 registered. Additionally our production sites in Czech Republic and Germany are ISO 14001 registered.
Worldwide supportWith five technical support centers on three continents, and a network of distributors supported by regional sales and service offices, our customers can always draw on our worldwide resources.
People, capabilities and systems to save resources and increase productivity
2
3
Table of Contents
SAF Pumps 6 - 7
Spray Nozzles 8
Supply Systems 21
Hydrostatic Bearing Lubrication (Oil) 20
CRL 101 Rail and Wheel Flange Lubrication 19
Cobra Chain Lubricator 18
ORSCO 17
PMA 2 Solenoid Pump 15 - 16
Centro-Matic 14
Brush Lubrication 13
Contact Lubrication 12
EOS Single-line Oil System 10 - 11
Schematic Spray System 4 - 5
Spray Systems
Chain Lubrication
Speciality systems
Accessories 9 - 10
4
Spray Lubrication Systems
Schematic Spray System
5
ApplicationslPinionlubricationlOpengears
IndustriesCement,mills,pulpandpaper
Spraysystemsusecompressedairtospraythelubricantdeliv-eredbythepumponpartsslid-ingagainstoneanotherorrollingacrossoneanother.
Common ComponentslPumps 215electricpump*
lSAFand Lubrigunpneumaticpumps
lEjectors (minipneumaticpump)**
Nozzles
lHSAwide-anglespraynozzles
CapabilitieslControllednozzlesprovide 100%monitoringofair-flow andlubricantsupplyas opposedtoairpressureand lubricantflow
lRepeatabilityofspraypattern
lCompleteaircontrolpossibility toreduceconsumption
* see Progressive & Multi-line catalogue** not covered in this catalogue – ask your Lincoln representative for details
6
SAF Pumps
Thesepneumaticbarrelpumps,SAF1-YLwithoneoutletandSAF2-YLwithtwooutletsaredesignedforuseinspraysystemsforthesupplyofadhesivelubricants(NLGI0and00).SAFpumpsareplaceddirectlyinto200literdrums.Theydonotrequireafollowerplate,thusthesupplyoflubricantispossibleevenifthedrumisseverelydent-ed.Withtheaidofanoptionalstandandwinchunit,itiseasytoexchangebarrels.
Models Part No. Description Number of Outlets Lubricant Output/Stroke Low-level615-26392-3 SAF1-YN 1 1,1cm3 no615-26393-4 SAF1-YL 1 1,1cm3 yes615-26394-3 SAF2-YN 2 2x1,1cm3 no615-26395-4 SAF2-YL 2 2x1,1cm3 yes
SAF Pump with Stand and Winch(Drum Supplied by Lubricant Supplier)
SAF1-YL
Technical Data maximumoperatingpressure 300bar(4350psi)drivingpressure minimum4bar(58psi)maximum10bar(145psi)airinletconnection 1/4NPTfemalepneumaticdriveratio 40:1soundlevel <70dB(A)lubricantoutlet G1/4f(BSPP)drumtype for200lliddedbarrelsacc.toDIN6644dimensions(LxWxH) 610x610x985mm(24x24x38.8in)
Accessories Part No. Description615-26739-1 standwithwinchforSAF1(1piniondrive)with airmaintenanceunit(FLR),pressurereliefvalve,airhosesandlubricanthoses615-26740-1 standwithwinchforSAF2(2piniondrive)with airmaintenanceunit(FLR),2pressurereliefvalves,airhosesandlubricanthoses515-30955-1 overpressurevalve(120bar)manifoldwithpressuregauge
Note: A 3/2 way air solenoid valve is required.
7
Example:Stand with Winch for SAF2
Item Designation A compressedairfromcompressor B compressedairtopump C compressedairtosprayunit D lubricantfrompump E lubricanttosprayunit
Item Designation 1 maintenanceunit 2 pressurereliefdeviceHSA-TD21 3 standwithwinch 4 low-pressurehoseOD16x1040mmwith20mmstud 5 high-pressurehoseOD6x1540mmwith10mmstud 6 low-pressurehoseOD13x1040mmwith15mmstud 7 high-pressurehoseOD8x1040mmwith10mmstud 8 high-pressurehoseOD8x1540mmwith10mmstud
Dimensions(LxBxH):950x700x2200mm
8
Nozzle Selection Guide & Part NumbersMounting Style Uncontrolled Nozzles Controlled Nozzles withoutMonitoring withMonitoring Limit Switch Proximity Switch (15-250 VAC) (15-250 VAC) mountingplate HSA-TD2 HSA-TD27 HSA-TD25 HSA-TD26 SD SDLMNR SDLMKR-ES SDLMKR-EN partno.615-25677-2 partno.615-27519-2 partno.615-27518-2partno.615-27571-2single HSA-TD2 HSA-TD30 HSA-TD28 HSA-TD29mountednozzle SD SDLHNR-G SDLHKR-ESG SDLHKR-ENG(forbrackets) partno.615-25677-2 partno.615-27583-2 partno.615-27585-2partno.615-27586-2
Spray Nozzles
Lincolnspraynozzlesaredesignedforthesprayingofadhesivelubricantsonpinionsandopengears.Thenozzlesareavailableinseveralversionsthatcoverawiderangeofappli-cationsandfunctionalfeatures.TheSDLKRseriesaretheonlynozzlesthatcanmonitorboththeflowofairandlubricantwithinthenozzle.TheeconomicallypricedSDseriescanbemoni-toredexternallybymeansofaprogressivemeteringdeviceand
theaircanbecontrolledwithanairsolenoidvalve.Completemountingplatesareavailableforeasyalignment.
Technical Data lubricantoutput 0.2–20cm3(0.0122–1.22in3)perminutespraysurfacecoverage approx.150mm(6.0in)wideand80mm(3.3in)highmountingdistance 150–200mm(6–8in)fromnozzletoapplicationpointairpressure uncontrollednozzle:3bar(43psi),controllednozzle:6bar(87psi)airrequirement approx.200Nl/min(freeair)foruncontrollednozzle max.40Nl/min(freeair)forcontrollednozzleoperatingpressure max.200bar(2900psi)foruncontrollednozzle max.120bar(1740psi)forcontrollednozzleconnections air: G1/4female(BSPP)HSA-TD25,26,27 lubricant: G1/4female(BSPP) fastening: M12connections air: 8mmtubingorhosestudHSA-TD2,28,29,30 lubricant: 6mmtubingorhosestud fastening: 8.5mmdia.
Note: Air inlet is marked as „L” and lubricant inlet is marked as „S”.Tightening torque for controlled nozzles = 20 Nm, electric monitoring signal = 20 ms.
Dimensions Model Height Length DepthnozzleSD 50mm(2.0in) 87mm(3.4in) 20mm(0.8in)nozzleSDLMKR-EN 110mm(4.3in) 140mm(5.5in) 45mm(1.8in)nozzleSDLMKR-ES 110mm(4.3in) 185mm(7.3in) 45mm(1.8in)nozzleSDLMNR 110mm(4.3in) 140mm(5.5in) 45mm(1.8in)
SD (HSA-TD2)
SDLKR (HSA-TD26)
9
Bracket Mounting,Accessories, Mounting Plates
Bracket Mounting (Bracket 515-31224-1) of SD Nozzles
Mounting Plates with SDLM Nozzles
Bracket Mounting (Bracket 515-31225-1) of SDLH Nozzles
10
Accessories, Lubricant Filter, Pressure Relief Unit
Compressed Air Block for 3 Nozzles Lubricant Filter Unit Pressure Relief Valve with Pressure Gauge
Models Part No. Description515-31224-1 bracketfornozzlesSD515-31225-1 bracketfornozzlesSDLH...615-25679-1 compressedairblockfor2nozzles airinlet:R3/8f(BSPT)outlets:8mmtube615-25680-1 compressedairblockfor3nozzles airinlet:R3/8f(BSPT)outlets:8mmtube615-25681-1 compressedairblockfor4nozzles airinlet:R3/8f(BSPT)outlets:8mmtube 628-25530-4 lubricantfilterunitwithpressuregaugeand120bar(1740psi) pressurereliefvalve(idealfor215pumpsusedforspraysystems)515-31252-2 pressurereliefunit,120bar(1740psi)withpressuregauge threadedconnections:G1/4female(BSPP)
EOSSingle-line Oil System
EOS is the reliable and most economical solution for the oil lubrication of chains. The system is a direct operating, electrically driven, single-line centralized lubrication sys-tem. The system is ideal for machines with chain drives and 12/24 VDC power supply - e.g. agricultural equipment such as balers. A typical industrial application is for packaging machine such as palletizers.
TheEOSmeteringelementssupplytherequiredoilquantityintime-controlledintervalstobrusheswhichevenlyapplytheoiltothechain.
Therequiredmeteredquantityofoilcanbeadjustedtoproperlymatchtheworkingcondition,thesizeandlengthofthechain.Themeteringrangeselectionof0.1,0.3,0.4or0.5ccmprovidesversatilitytoensurethatrequire-mentsaremet.
EOS ControllerFormachineswithoutacontrol-ler,e.g.balersintheagriculturalindustry,Lincolnoffersa12/24VDCcontroller.Theruntimeisfixedat4secondsandthepausetimeisadjustablefrom1to100minutes.ThecontrollerenablesasimpleretrofitinstallmentoftheEOSoillubricationsystem.
Single-line Oil System
11
EOS Single-line Oil Systemsfor the lubrication of Slow Moving Chains
Model Part No. Description Motor552-32404-1 PumpEOP-12 12VDC552-32405-1 PumpEOP-24 24VDC552-32397-1 MeteringelementEOE,complete.0.1cm3
552-32398-1 MeteringelementEOE,complete.0.3cm3
552-32399-1 MeteringelementEOE,complete.0.4cm3
552-32400-1 MeteringelementEOE,complete.0.5cm3
452-70235-1 Dividerbar,double452-70236-1 Dividerbar,triple452-70237-1 Dividerbar,quatruple307-19543-1 BracketforDividerbars112-35255-4 Tube,PA12HL8.0x1.0,black112-35255-3 Tube,PA12HL4.0x0.65,black
EOT Controller 12/24 VDC Part No. Description664-34135-3 Controller12VDC664-34135-4 Controller24VDC
Technical Data Powersupply 12/24VDCTolerance -15/+20%Powerrating max.0,65KWOperatingtemperature -20°C...60°C
See technical manual for details
Technical Data ReservoirSize 5lDimensions(LxWxH) 180x205x302mmPowersupply 12or24VDCMax.current at12VDC=5A/at24VDC=2.5AMax.Operatingpressure approx4barTheoreticaloutputat4bar 0,5l/minOperatingtemperature 0to40°CFactorysettinf* maxruntime4secwithapauseof30sec.Suitableoils** mineraloilSAEOW-40EMV acc.ToDINVDE879/2:199903andacc.ToENISO14982:1998
Meteringelements Colour Ring Output / stroke white 0,1cm3
red 0,3cm3
green 0,4cm3
blue 0,5cm3
Note: Please verify applications involving parameter variances with Lincoln GmbH before commissioning.* With an increase in the number of lube lines – the run time and the pause time of the electrically driven gear pump must be increased.** The following oils may not be used in the EOS: used oil, gear oil, glucose oil and plant oil.
12
Selection of Available Guide Blocks for Single Roller Chains Chain Size DIN ISO Nr. Type Guide Block Description Part No.3/4”x7/16” 12B-1 upper* compl.200RK-1F3/4x7/162S 526-32700-1 Lower** compl.200RK-1F3/4x7/16 526-32699-11”x17mm 16B-1 upper* compl.200RK-1F1“x17mm2S 526-32704-1 Lower** compl.200RK-1F1“x17mm 526-32703-111/4”x3/4” 20B-1 upper* compl.200RK-1F11/4x3/42S 526-32708-1 Lower** compl.200RK-1F11/4x3/4 526-32707-111/2”x1” 24B-1 upper* compl.200RK-1F11/2x12S 526-32706-1 Lower** compl.200RK-1F11/2x1 526-32705-1
* with lubricant connections M 6x1 (2S = 2 lubricant connections, 3S = 3 lubricant connections** without lubricant connections
Selection of Available Guide Blocks for Double Roller Chains Chain Size DIN ISO Nr. Type Guide Block Description Part No.3/4”x7/16” 12B-2 upper* compl.200RK-2F3/4x7/163S 526-32710-1 Lower** compl.200RK-2F3/4x7/16 526-32709-121/2”x11/2” 40B-2 upper* compl.200RK-2F21/2x11/23S 526-32714-1 Lower** compl.200RK-2F21/2x11/23S 526-32713-1
Contact Lubricationwith Guide Blocks
Thecontactlubricationcom-prises2polymer-plasticblocksbetweenwhichthechainruns.Theguideblocksfitexactlytothesizeandtypeofchain(rollerchainsaccording.toDIN8187).
Theupperblockhaschannelsthatdirectthelubricanttothechain.Thelubricantisdistributedalongthelengthoftheblockallowingittopenetratethechain.
Thissystemoffersessentialadvantages-theworstofthedirtonthechainiscleanedoff,thechainisguidedandsuppliedwithcontinuouslubricant.Thecontactlubricationhasanextraordinarylonglifethankstohighlywear-resistantplasticsthatareveryrobustandinsensitivetocon-taminationandknocks.
ApplicationsContactlubricationisidealforslowandfastmovingchains(uptoamax.of40m/min).Alltypesoflubricant-fromlowviscosityoiltolubricationgreasescanbeused.Lincolncentralizedlubrica-tionsystemsprovidetheopti-mumlubricantsupply.
Thesystemhasbeendesignedespeciallyforchainsinpalletconveyorsystems,e.g.inthefoodandbeverageindustry.Palletsystemsforreturngoodsareparticularlyexposedtoahighgradeofcontamination:woodchips,brokenglass,andinthewinter,iceparticlessticktothechainandresultinprematurewear.Otherapplicationsforacontactlubricationsystemarepassengerorfreightelevatorsaswellasescalators.
Guide Blocks & Mounting
Contact Lubrication
13
QuicklubProgressive System for Grease or Oil for Slow Moving, Small Chains
Chain Lubrication
The Lincoln brush lubrication in conjunction with the Quicklub 203 pump provides an econom-ical entry-level chain lubrication system. The Quicklub range does however offer numer-ous add-on possibilities. As a result, it fulfils all expectations for an easy, maintenance-friendly and high quality lubri-cation system.
Brushlubricationnotonlylubri-catesthecontactpointsofthelinks,butrathertheentirechain.Thepumpsuppliesthelubricanteitherdirectlyorviaaprogressivemeteringdevicetothebrushes,whichevenlyapplythelubricanttothechain.Asaresult,high-viscouschainoilsandlubricantsuptoNLGIclass2canbeeasily,economicallyandreliablyapplied.
Aprogressivesystemcanserveupto100lubricationpoints,thusseveralbrushesmaybeposi-tionedalongthechainstoensuresufficientlubricantsupply.
Optionalsystemmonitoringisofferedwitha203pumpincor-poratingtheappropriatePCBandcorrespondingprogressivemeteringdevices.Additionaloptionsincludelowlevelmoni-toring.
14
Centro-MaticCentralized Lubrication System
Oil Lubrication for slow moving chainslThechainspeedcanbeupto 6m/minifbrushesareused.lForcontact-freesquirtapplications,thechainspeedisdependentonthechaindivi-sionandthetotalnumberofSL-43lubricantinjectors.
TheCentro-Maticsystemisasingle-linesystem.Oneapplica-tionforaCentro-Maticsystemistheoillubricationofchains.
TheCentro-Maticoilsystemoperatesintermittentlywithachangeinpressureandpressurerelief.Acentralizedpumpsuppliestheconnectedinjectorswithoil.Theinjectorsuppliesthemeteredquantityofoilunderpressure(52-69bar)andthemeteringchamberisfilled.Afterthemain-linepressurehasbeenrelieved,thepresetquantityofoilfromthemeteringpistonisforcedinfrontofthesupplypiston.TheLincoln“SL”injectorsarethekeycom-ponentofaCentro-Maticsystem.
Theinjectorsareinfinitelyadjust-ableandtheyareequippedwithanindicatorpinforvisualmonitoring.SL-43injectors,withapneumaticallydrivensingle-strokecentralizedlubricationpump,aremostcommonlyusedforoillubricationofchains.
System AdvantageslSwitchingonandoffofindividualchaingroupsispossiblelExactmetering,independentofoilviscosityandflowresistancelThehighoperatingpressureoftheinjectorenablesaccurateoilexpulsionlLubricateswithoutcom-pressedair
83667 Single-stroke PumpPneumaticdriveAirinletpressure2.9-3.4barRatio20:1Output7.3cm3
Reservoircapacity2LHeight470mm
82885 Single-stroke Pump(notshown)Asabove,exceptReservoircapacity0.59L
Height264mm
Note: Controller andpressure reducer required
SL-43 InjectorsAdjustable0.016to0.131cm3
Manifoldsavailablewith1to4lubricantinjectors
We design each Centro-Matic chain lubrication system from individual components to suit your requirements.
15
PMA 2 Solenoid Pumpwith Squirt Nozzles
The PMA 2 solenoid pump is designed for a contact-free oil lubrication of chains. The exact metered quantity of oil is squirted without air (airless), and without producing an oil mist, while the chain is in oper-ation. The lubricant can also be directly applied via brushes or lubrication points.
Thepump’sfastcyclefrequencyof5Hertzenablestrouble-freelubricationoffastmovingchains.Asinglepumpcansupply1to6oilsquirtnozzles.Double-nozzlesarealsoavail-ablewhichfurtherincreasethenumberofpointsservedbythe
pump.Themeteredquantityofoilpercycleiseither30mmor60mm
Thedrivemagnetischaracter-izedbyitshighperformanceandlongduty-cycle,thusenablingareliableoperationofthepumpinextremeconditions.Thepumpisavailablein24VDC,120VACand230VACversions.Anoptionalproximityswitchforthepumpoffersasimplemethodtoelectricallymonitorthefunc-tion.
Otheraccessoriesincludea13ora36litrereservoirforoil.Bothreservoirsareequippedwith
PMA 2 Pump System
electricallow-levelcontrolandalargefillingportcomprisingastrainer.
System Advantages & FeatureslMeteredoilquantity30mmor60mmpercyclelAvailablein24VDC,120VACand230VACversionslOptionalelectricalmonitoringviaaproximityswitchl1to6outletsthatcanserveindividualordoublenozzleslUpto5lubricationcyclespersecond(dependingonthesystem)lAirlesslubrication–oilmistfree
16
PMA 2 Solenoid Pumpwith Squirt Nozzles
Squirt Nozzle PMA 2 Pump
Accessories Part No. Description615-28660-3 Squirtnozzlefor6mmtube615-29209-1 Double-nozzle,straightfor6mmtube615-29301-1 Double-nozzle,90ºfor6mmtube651-28691-1 13lplasticreservoirwithelectriclow-level(floatswitch)651-28685-1 36lplasticreservoirwithelectriclow-level(floatswitch)
Models with 60 mm3 Output (0.0036 in3) - Standard VersionsPart No. Description Number of Supply Voltage Proximity Outlets Switch
651-40947-1 PMA2-...-1-60-230AC 1 230VAC no651-40947-3 PMA2-...-2-60-230AC 2 no651-40947-9 PMA2-...-4-60-230AC 4 no651-40948-2 PMA2-...-6-60-230AC 6 no651-40947-4 PMA2-...-2-60-230AC-N 2 yes651-40948-1 PMA2-...-4-60-230AC-N 4 yes651-40945-2 PMA2-...-1-60-24DC 1 24VDC no651-40945-3 PMA2-...-2-60-24DC 2 no651-40945-4 PMA2-...-4-60-24DC 4 no651-40945-6 PMA2-...-6-60-24DC 6 no651-40945-8 PMA2-...-2-60-24DC-N 2 yes651-40945-5 PMA2-...-4-60-24DC-N 4 yes651-40946-1 PMA2-...-2-60-120AC 2 120VAC no
Models with 30 mm3 Output (0.0018 in3) - Standard VersionsPart No. Description Number of Supply Voltage Proximity Outlets Switch651-40947-3 PMA2-...-2-30-230AC 2 230VAC no651-40947-7 PMA2-...-4-30-230AC 4 230VAC no651-40947-2 PMA2-...-2-30-230AC-N 2 230VAC yes651-40945-1 PMA2-...-1-30-24DC 1 24VDC no
17
ORSCOMinimum Quantity Oil Spray System
Oil Spray System for Extreme Fast Moving Chains ORSCOspraysystemscovertheentireoillubricationrangefromslowtofastmovingchains.Itis,however,especiallyidealforthelubricationofextremefastmovingchainsorforcriticalapplicationswhereover-lubricationorproductcontaminationmustbeavoided.
Oil Spray Systems for Production LinesAfurtherapplicationfortheORSCOsystemisfortheoilingofcomponentssuchascylinders,shaftsetc.intheproduction,aswellastoollubricationinthemetal-formingindustry.
Oilandspray-airareonlyfirstcombinedinaspecialmixingchamberwithinthenozzle.Thecompressedairactsmerelyasatransportmediumtocarrytheminuteoilquantitytothepointoflubrication(notanoil-mistlubrica-tion).
Eachnozzleissuppliedintermit-tently(minimumcyclefrequencyof2Hz)byapneumaticallyoper-atedinjectorpumpwithameteredamountofoil(15mmor60mm).
Dependingontheinjectorversionandthecyclefrequency,eitheranultra-fineorathickeroilfilmisapplied.
Orsco Spray NozzlesNumerousnozzletypes,invari-ousversions,enabletheORSCOspraysystemtocovermostappli-cations.
Thespraynozzlestype„SWN“(asshown)withdifferentspraypatternsareusedforexampleinchainlubricationapplications.SpraynozzleSWNLPhastheconnectionsontheside,whileSWNILhastheconnectionsattheback.Pleaseinquireforfurtherdetailedinformation.
Compact Series PumpsWhenanexistingPLCisavailable,ourstandardcomponentscanbeeasilyused.
Thestandardseriescanaccom-modateupto8injectorpumps-witheither15mmor60mmperstroke.Themodulesareavailablewithorwithoutcomponentssuchasairsolenoids,pressureswitch-es,airfilter/regulator,etc.
Whererequired,weconfigure&designeachpumpassemblytoexactlymatchyourneedsandspecificapplication.
Lubrication System SeriesThesemodulesarecompletepre-assembledlubricationsystemstationsthatincludeacontroller,airsolenoidvalves,airfilter,oilreservoirandinjectorpumps.
Thenumberandtypeofinjec-torpumpsareselectable.ThestandardSeries170system(seephoto)isavailablewithupto16injectorpumpswithachoiceof15mmor60mmoutputperstroke.
Thelistofequipmentforeachmodulecanbeindividuallyconfig-uredfromstandardcomponents.Pleaseaskusforfurtherdetails.
Pleaseinquireaboutcustomtai-loredlubricationsystems(Series200&300)withmorethan16injectorpumps,and/orcustomerspecificcontrollers,orwithaddi-tionalmonitoringfunctions.Wewilldesignasystemtoyourspecifications.
Oil Spray System for Production Lines Pump Series VS, Without ReservoirPump Series VSR, 4L Oil Reservoir
Spray Nozzle - SWN LP, Side ConnectionsSpray Nozzle - SWN IP, Back Connections
Standard System Series 170 Typ 170
18
Cobra Lubricator
Metering and Monitoring Unit
Cobra 1X
TheenhancedCobra1XfromLincoln’schainlubricationrangeisparticularlysuitableforconveyorchainsandconveyorlines,inwhichtheinnerrollerandstudofthechainarelubricatedwhilethechainisinoperation.ThesystemcansupplyeitherNLGIclass2greaseoroil.Anewdrivetechnology,whichisacombinationofapneumaticandmechanicaldrive,aswellasanewlydesignedlubricationhead,providestwokeyadvantages:•Theloadsubjectedtothechainissubstantiallylower
lAhighermaximumlubricantpressureofupto150bar
Thenewlydesignedlubricationheadenablesanexactmeteringfrom0.2cmto2cmperlubri-cationcycle,andtheadjustingscrewpermitsinfinitemeteringadjustingwithinthisrange.Visualmonitoringisperformedviaanindicatorpin.
The following information is necessary when requesting a quote for a Cobra system
l NumberofchainslDistancebetweenthechainslDeviationsoflubricatingnipple–horizontallyandverticallylPositionofchainatCobramountingplacelNumberoflubricatingpoints/chainlDoesthechainmoveforwardandbackward?
l SpeedofchainlPitchofchainlTotallengthofchain/conveyorlTypeofoperation–continuous,interval(pauseandruntimesneeded)lTypeoflubricatingnipplelTemperatureinmountingarealCompressedairsupplypressure
lElectricalsupplylEnvironmentalinfluences–humidity,aggressive environment,etc.lTypeoflubricant
System Benefits l ForoilandgreaseuptoNLGIclass2lLubricationfrequencyof1cyclepersecond.lSupplyquantityof0.2cmto2cmperstrokelLubricantpressureofmax.150barlForchainspeedsupto24m/minlManualStart/Stoporoptionalautomated(electropneumatic)lVisualmonitoringviaindicatorpinlNocontrolcabinetrequired(forthestandardversion)
ApplicationslMininglSteel&ironindustrylCementindustrylAutomotiveplantslFoodprocessingoperations
Forcomplicatedapplicationswithintricateaccess–weofferacom-pletepneumaticallycontrolledCobra501unit.
Cobrasystemscanbeindividu-allydesignedtosuityourappli-cation.Ourproject&systemsengineerswillgladlyofferyouacustom-designedsystemtomatchyourrequirements
Technical Data Max.lubricationcyclefrequency 1lubeimpluseeverysecondMax.chainspeed 400mm/s(24m/min)
19
CRL 101 – Automated Wheel Flange Lubrication for rails and wheels of cranes and other Rail Vehicles
TheLincolnCRL101usestwolubricationrollersfortheleftandrightflankofthecranerailtoevenlyapplylubricant.
Regularlubricationofrailscon-siderablyincreasesthelifeexpec-tancyofthewheelsandreducesthewearontherailitself.Thislowersrepaircostsandmoreimportantly,reducescostlydown-time.
The system is suitable for all types of cranes that operate on a rail profile according to DIN 536 Part 1 (size A 45 to A 120). It is especially ideal for harbour cranes, as well as overhead or gantry cranes.
Thelubricantsupplytothelubri-cantrollersistypicallyprovidedbyaLincolnmultilinepumptype205andadownstreampro-gressivemeteringdevicetypeSSV6-K.Theindicatorpinonthemeteringdevicecanbeusedtovisuallydetermineiflubricantisevenlyflowing.
Thepumpisavailableindiffer-entratiosandwithanadjustablepumpelement,thusenablingtheexactmatchingofoutputversusrequirement.Asaresult,inmostcasesanelectricalcontrolpanelforthepumpisnotrequired.Thedriveofthepumpissimplyrunintandemwiththatofthecrane’sdrive.
Thepumpreservoirisavail-ablein4,8or30litercapacity(withoptionallowlevelcontrol).Biodegradablelubricantsorlubri-cantwithaddedsolidparticlesmaybeused.Pleasecontactusforqueriesonapprovedlubri-cants.
System CharacteristicslReservoircapacity:4l,8lor30l–optionalelectriclevelcontrollForcranerailwidthsfrom45to120mmlR1/4”flexiblelubricationlineconnection
Wheel Flange Lubrication
Schematic: Wheel Flange Lubrication
20
HydrostaticBearing Lubrication (Oil)
Applicationsl Hydrostaticandhydrodynamic lubricationoflargebearings (Cementkilns)lTurbineslSteelmillslGearslPapermachineslPowerstationsThesystemsmaybeclassifiedintothefollowinggroups:lOilsupplysystems-hydrauliclLubricationoilsupplysystemslBlockingoilsystems(usedto maintainseparationpoints-e.g. differentpressuresormediums)lRegulation/controloilsystems
Thesystemsdifferlargelydepend-ingontherequirementsanddesiredfeaturesofthecustomer.Ourprojectengineersarealwayspleasedtoprovideyouwithatailor-madesystemtomeetyourapplication.
ZPU09/09A Pump for Hydrostatic LubricationThishighpressurecentrallubrica-tionpumpisdesignedforuseinhydrostaticlubricationsystemsonly.Itisavailablewithoneor
twooutletsandissuitableforthesupplyofoilswithavis-cosityof20to460cSt.
ZPU09
ModelsPart No. Description Number of Outlets Motor605-27545-1 ZPU09/08GT-380-415,420-480 1 3-phasegearmotor, multi-range380-415/420-480V605-27546-1 ZPU09/08GT-500 1 3-phasegearmotor,500V605-27547-1 ZPU09A/08GT-380-415,420-480 2 3-phasegearmotor,
605-27548-1 ZPU09A/08GT-500 2 3-phasegearmotor,500V605-28960-1 ZPU09/08ST-380-415,420-480 1 3-phasegearmotor, multi-range380-415/420-480V 605-28166-1 ZPU09/08GT-000 1 withoutmotor
Technical Data ZPU09 ZPU09 ANumberofoutlets 1 2Lubricantoutput 8liters/hr.(2.1U.S.gal/hr.) 2x4liters/hr.(2x1U.S.gal/hr.)Max.operatingpressure 400bar(5800psi)Drivespeed 60rpmReservoircapacity 8lConnectionThreads PressurelineG3/8female(BSPP) FillinglineG3/8female(BSPP)
21
Supply Systems
ApplicationlBulksupplysystemslCompleteplantsystemsWeoffercompleteplantlubricationsupplysystemsthat,fromasinglesource,supplyanentirenetworkofsystems.
Containerpumpsor,ifneeded,boosterpumpsareusedtosupplysecondarypumpstations.
Boosterpumpsareusedtoassistinpumpinglubricantsoverextremelylongdistances.Whentubelengthsexceedseveralhundredmeters,boosterpumpsarerequiredtoboostthepressure.
Lincoln’slubricationsupplysystemsguaranteetrouble-freeoperationinallsortsofapplications.
Bulk Supply System
22
Notes
Bearings and unitsSeals Lubrication
systems
Mechatronics Services
The Power of Knowledge Engineering
Drawing on five areas of competence and application-specific expertise amassed over more than 100 years, SKF brings innovative solutions to OEMs and production facilities in every major industry world-wide. These five competence areas include bearings and units, seals, lubrication systems, mechatronics (combining mechanics and electronics into intelligent systems), and a wide range of services, from 3-D computer modelling to advanced condition monitoring and reliability and asset management systems. A global presence provides SKF customers uniform quality standards and worldwide product availability.
! Important information on product usageAll products from Lincoln may be used only for their intended purpose as described in this
brochure and in any instructions. If operating instructions are supplied with the products, they must be read and followed.
Not all lubricants are suitable for use in centralized lubrication systems. Lincoln does offer an inspection service to test customer supplied lubricant to determine if it can be used in a central-ized system. Lincoln lubrication systems or their components are not approved for use with gases, liquefied gases, pressurized gases in solution and fluids with a vapor pressure exceeding normal atmospheric pressure (1 013 mbar) by more than 0,5 bar at their maximum permissible temperature.
Hazardous materials of any kind, especially the materials classified as hazardous by European Community Directive EC 67/548/EEC, Article 2, Par. 2, may not be used to fill SKF centralized lubrication systems and components and delivered and/or distributed with the same.
® SKF is a registered trademark of the SKF Group.
® Lincoln, BearingSaver, Centro-Matic, Duo-Matic, Helios, ModularLube, ORSCO, PileDriver, PowerMaster, PowerLuber and Quicklub are registered trademarks of the Lincoln Industrial Corp.
© SKF Group 2015The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permis-sion is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
October 2015 · FORM W-114-EN-1510
SKF Lubrication Systems Germany GmbHHeinrich-Hertz-Str. 2-8 · 69190 WalldorfGermanyTel +49 6227 33-0Fax +49 6227 33-259
23
skf.com/lubricationskf.com lincolnindustrial.de