20
Linde Material Handling Enter the E-zone. The new Linde electric counterbalance range E 12 – E 20.
| Date post: | 08-May-2018 |
| Category: |
Documents |
| Upload: | truongthuy |
| View: | 216 times |
| Download: | 1 times |
Enter the E zone. Der neue Linde Elektrostapler E 12 – E 20.
Linde Material Handling
Enter the E-zone. The new Linde electric counterbalance range E 12 – E 20.
A matter of course for Linde. Linde raises the benchmark for functional innovation, comfort, performance, effi ciency, safety, economy and reliability with the new range: because Linde customers have high expectations – and rightly so.
Linde consistency. Once again Linde has set newstandards. Businesses can now achieve even more by using Linde electric counterbalance trucks.
Enter the E-zone
Enter the E-zone
E denotes Electricity, Energy, Effi ciency and Economy.
Linde presents a new formula for higher throughput.
Energy for your handling processes. Unique axle provides exceptional mobility.
Everything revolves around the new axle. Once again, Linde has stretched the technical boundaries. The new axle produces impressive output with minimal input. A technical masterpiece, which is both powerful and virtually indestructible.
The new axle combines compact dimensions with high performance enabling seamless, precision manoeuvrability in the toughest of applications while demanding little in return. Its new sensor-controlled cooling system provides a high level of effi ciency.
Every component of the axle has been specially developed for this new model series. The steering system and the axle form a single compact, space-saving unit.
3 The new compact axle is completely encapsulated and is virtually maintenance-free. Apart from oils there are no axle servicing costs to consider, and the unit will endure the most demanding operating conditions without failure.
3 The sealed electronic control modules are mounted directly onto the axle to enhance performance, and the shortened cable runs ensure excellent effi ciency.
3 The axle is sealed against the ingress of dust and water and the controls are also protected for trouble-free use in cold store applications.
3 Unlike conventional forklifts the new Linde range has an active, sensor-controlled cooling system which ensures that maximum levels of motor effi ciency and output are maintained for long periods even when working in very hot climates or environments.
3 The steering angle sensor on the steering axle controls the rpm of the wheels, individually for each driven wheel, on the basis of the steering setting. When the truck is turning in a curve, power is automatically reduced to the drive wheel on the inside of the curve. This increases the energy yield and the thrust force and optimises roadholding and stability characteristics. Tyre stresses are also minimised for extended tyre life.
Fans Fan cooling vanes
The drive unit remains cool and producesits full performance even at high ambienttemperatures of up to 40 °C.
Airfl ow intake
Cross-section through the axle
zone
Performance module: Traction Performance module: Lift Exploded view of a drive unit
Wheel bearing
2nd-stage gears
Maintenance-free oil bath multi-disc brake
1st-stage gears
AC motor (right)
Lift motor
Energy that is visible. Energy that goes further for longer.
Performance depends on energy. The new Linde E-trucks have a unique energy management system incorporating an advanced Linde battery state of charge indicator. Apart from accurately and reliably displaying the energy available at any given time, it also precisely measures the current and the available voltage to provide the operator with a continuous update of the battery’s overall condition; thus ensuring maximum uptime and extended battery life.
Previously, it was only possible to show the approximate battery charge level. The Linde energy management system provides advanced warning of charging requirements making it a simple matter to calculate shifts. It also enables the operator to utilise more of the available battery energy without damaging the battery through deep discharging. This increases both productivity and profi tability.
35
30
25
20
15
10
5
0Linde E 16 Competitors
32.36
29.03
25.16 25.0724.21 24.12 23.94
19.05
1 2 3 4 5 6 7
Linde engineers have calculated, measured and developed. The end result is the new E-indicator, the index for handling performance that takes account of time and energy consumption. This is the fi rst effi ciency index for the materials handling industry:
E-in
dic
ator
3
Load throughput
time x energy consumption E-indicator =
s
Energy at work.Energy rapidly regenerated.
More uptime, shorter charging times. Because of the highly effi cient axle, each battery charge lasts longer and the charging process is faster. Depending on the battery capacity, charging takes between 5.5 and 7.5 hours (utilising high-frequency charging equipment and electrolytic recirculation.) A new high-frequency on-board charger unit is optionally available for charging the battery in situ on the truck – safely and quickly. This is good for the working schedules and good for the battery.
If the high-frequency on-board charging option is not selected Linde offers fi ve optional methods of rapid battery changing to your individual requirements.
Only Linde has so many different changing options in its range.
Whether lifting or rolling the battery out sideways or hoisting out vertically, Linde has a battery changing solution to suit your individual requirements.
With the new Linde intelligent battery management system, errors inhandling the battery are virtually eliminated; there is no danger of fi tting the wrong battery, no deep discharging and no overcharging.
The Linde high-frequency on-board charger unit for safe, rapid battery charging (optional).
zone
Energy gained through motivation. Operators enjoy driving Linde counterbalance trucks.
All the performance parameters are easy to change on a Linde forklift. Anyone who has ever driven one will confi rm this. Some of the major ergonomic features can only be appreciated by driving the truck: Linde has introduced an intuitive operator-truck interface into the cab. All the fi ngertip controls are within easy reach and require only minimal movements. The less the operator has to move in the truck, the more the operator can move with the truck.
zone
Linde PureMotion is the name given to the entire range of environmentally-friendly measures offered by Linde fork lift trucks. After all, market leadership means accepting responsibility for all aspects relating to the environment and health and wellbeing in the workplace.
Advances in Linde fork lift trucks meet or exceed current standards.
For example, comparison of vibration levels for Linde fork lift trucks with those of competitor trucks illustrates the superiority of the isolated drive axle concept, especially at higher driving speeds. When high handling performance and high driving speeds are combined, competitor trucks exceed the recommended exposure level.
In other human vibration dampening comparisons such as driving over drastically varying surfaces, Linde fork lift trucks achieve the best results.
Excellent all-round visibility makes it possible to work more effectively and productively in complete safety.
Vibr
atio
n va
lue
(m/
s2 )
1.5
1.0
0.5
0
4 8 12 16 20
Linde Series 386 E20PL Competitor 1 Competitor 2
According toEN 1305910 km/h
Usage at16 km/h
Driving speed (km/h)
Comparison measures show the clear differences in the vibration values for Linde forklifts compared with those of the competition at speeds > 10 km/h.
zone
Energy under control.Visibility increases productivity.
The more the operator is able to see during the working shift, the more productivity will be seen at the end of the shift. The better the view when driving, the more pallets per hour. Linde counterbalance trucks are superbly easy to operate and provide the perfect blend of safety, precision, effi ciency, high productivity and economy.
The reason for this lies not only in the unique drive system but also in the innovative design and layout of the chassis, cab and mast units. The operator sits beneath a self-supporting frame and protective overhead guard – the Linde ProtectorFrame. It is designed to fulfi l two essential functions: it protects the operator, and stabilises the load.
The unique, inclined top mounted tilt cylinders evenly distribute the stresses imposed by the load and stabilise it during the lifting, lowering and tilting cycles.
In addition, the mast is mounted directly to the drive axle so that road shocks are not transferred to the operator’s compartment or the load.
The result of this innovative layout is safe, precise load handling in all operating conditions as well as reduced handling costs.
The sturdy Linde ProtectorFrame ensures the operator’s safety. Isolating and cushioning road vibrations provides greater operator comfort. Insert: resilient axle suspension system.
Energy for all applications. Whether Linde electric counterbalance rangcompanies and builders‘ merchants. industries. Ideal for the paper and prmetal working industries. Ideal for tindustries. Ideal for the timber tradefor the electrical engineering industrgovernment agencies. Ideal for the plastic and food processing industriewholesalers and retailers. Ideal for tand aircraft manufacturing industrieand leather industries. Ideal for powoperations. Ideal for farm storage prIdeal for specialist retailers. Ideal for every type of warehouse and third pprocesses not mentioned here. The nrange E 12 – E 20. Ideal for your busi
standard or specialised. The new e E 12 – E 20. Ideal for construction Ideal for the drinks and bottling inting industries. Ideal for the he road transport and distribution s. Ideal for the glass trade. Ideal ies. Ideal for local and national chemical industry. Ideal for the s. Ideal for all food and non food he automotive, parts, ship building s. Ideal for the textile, clothing er generation and distribution
rocesses and farm co-operatives. ports, airports and airlines. Ideal for arty distribution. Ideal for handling new Linde electric counterbalance ness.
As individual as your business. Choose from numerous co
Everything revolves around your success.The essential features in the Linde E 12 – E 20series are not only its advanced technologybut also its high level of bespoke adaptability at an economic price.
Adaptability begins at the factory: the wide choice of capacity classes, battery sizes, battery charging and changing options, mast lift heights and motor outputs combine to provide more than 100 specifi cation confi gurations to address your specifi c materials handling issues to bring you the greatest benefi ts today, tomorrow and in the future.
P= Linde combi axle
E 16 three-wheeler
zone
E 18 three-wheeler – long wheelbase
Models
E 12
E 15
E 14
E 16
E 16
E 16
E 16
E 18
E 18
E 20
E 16 P
E 16 P
E 18 P
E 20 P
E 20 P
E 20 P
Chassis type
Compact
High
Long wheelbase
Long wheelbase
Long wheelbase
High
High
High
Long wheelbase
High/Long wheelbase
Carrying capacity
1.2 t
1.5 t
1.4 t
1.6 t
1.6 t
1.6 t
1.6 t
1.8 t
1.8 t
2.0 t
1.6 t
1.6 t
1.8 t
2.0 t
2.0 t
2.0 t
4500 mm
4500 mm
4500 mm
5000 mm
5000 mm
4500 mm
4500 mm
4000 mm
4500 mm
5000 mm
4500 mm
4500 mm
4500 mm
4500 mm
Lift height at full
residual capacity
ombinations.
Turning on the spot –the Linde close-coupled axle (left) and the Linde combi axle (right)
E 20 P four-wheeler with full cab
Aisle width 1000 x 1200
across the forks
3040 mm
3177 mm
3177 mm
3281 mm
3196 mm
3332 mm
3387 mm
3305 mm
3394 mm
3394 mm
3355 mm
3404 mm
3409 mm
3412 mm
3470 mm
3520 mm
Overall height/
Seat height
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
2.13 m /1065 mm
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
1.97 m / 908 mm
2.13 m /1065 mm
2.13 m /1065 mm
2.13 m /1065 mm
1.97 m / 908 mm
2.13 m /1065 mm
Battery
24 V 5PzS550L
24 V 8PzS880L
48 V 4PzS440L
48 V 5PzS550L
48 V 4PzS440L
48 V 5PzS700L
48 V 6PzS660L
48 V 5PzS550L
48 V 6PzS660L
48 V 6PzS660L
48 V 5PzS550L
48 V 5PzS700L
48 V 5PzS700L
48 V 5PzS700L
48 V 6PzS660L
48 V 8PzS840L
Performance
Performance Plus
Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
High Performance Plus
Ultra High Performance Plus
Ultra High Performance Plus
Ultra High Performance Plus
Ultra High Performance Plus
Ultra High Performance Plus
Ultra High Performance Plus
For automatic connection to your nearest national network company call*:
0845 608 5000www.linde-mh.co.uk
* excluding Republic of Ireland
Linde Material HandlingScotland LtdEast Kilbride
Telephone: 01355 233601
Facsimile: 01355 235833
Linde Castle LtdDurham
Telephone: 01325 311526
Facsimile: 01325 315860
Linde Jewsbury’s LtdCastleford
Telephone: 01977 668722
Facsimile: 01977 628842
Linde Sterling LtdWarrington
Telephone: 01925 651177
Facsimile: 01925 417011
Linde Creighton LtdBirmingham
Telephone: 0121 524 3300
Facsimile: 0121 524 3399
Linde Material Handling East LtdHoddesdon
Telephone: 01992 443381
Facsimile: 01992 468050
Linde Severnside LtdBridgend
Telephone: 01656 766600
Facsimile: 01656 648668
Linde Material HandlingSouth East LtdCamberley
Telephone: 01276 403400
Facsimile: 01276 403499
Handling & StorageEquipment Co LtdLisburn
Telephone: 028 9266 1010
Facsimile: 028 9266 7711
Linde Material Handling(Ireland) LtdDublin
Telephone: 00 353 1 456 6626
Facsimile: 00 353 1 456 6518
Head Offi ceLinde Material Handling (UK) LtdKingsclere Road, Basingstoke,
Hampshire RG21 6XJ
Telephone: 01256 342000
Facsimile: 01256 342923
inte
d in
Uni
ted
King
dom
. LG5
258/
6/08
No-one is closer to your business.
Excellence at work.
Linde Material Handling
