LineRunner Product Overview - Saudi...

PRO

DU

CT

over

view

LineRunner Product Overview (2008 02 12).indd 1LineRunner Product Overview (2008 02 12).indd 1 12.02.2008 10:39:1212.02.2008 10:39:12

2

This is LineRunner

LineRunner Provides

Modern point-to-point data transmission for professional applications of public and private network operators

SHDSL with up to 5.7 Mbps via copper lines

Data transmission via copper lines and optical fi bres or leased lines

Many housing types for indoor and outdoor installation

Controllable via the integrative network management system ASMOS

Developed and manufactured according to ISO 9001

LineRunner Applications

For interconnection of single LANs, remote data terminals or multiple utilisation of existing copper cables for telephone extensions, for desktop-desktop connections or bus structures to connect up to 63 locations over onetransmission path:

We have the perfect solution for all of your applications.

Table of Contents

LineRunner SHDSL LCM/DTM 4

LineRunner SCADA NG 8

LineRunner ASMOS 10


3

LineRunner SHDSL

carries out 4.6 Mbps data transmissionaccording to standardised SHDSL methods. Modules with a variety of interfaces andremotely supplied regenerators to increase transmission ranges mean that even special solutions are possible.

The desktop can be easily adapted to customer requirements due to the pluggable optional application interface.

LineRunner SCADA NG

is the solution for effi ciently connecting numerous points on long routes (e.g. alongside motorways, railway lines, pipelines etc.) with a maximum of 5.7 Mbps.

LineRunner SCADA NG operates with themultidrop principle. So each SCADA modem is the station‘s port and regenerator simulta-neously. High ranges and variable topologies (point-to-point, line, ring) allow economic and reliable deployment of modern telecontrol networks.

LineRunner ASMOS

is the network management system forthe entire LineRunner family. Installed on a Windows PC you can confi gure, manage and monitor all LineRunner systems withLineRunner ASMOS.

An Ethernet or RS-232 connection allowsdata exchange between ASMOS and thecomponents.

Using ASMOS you can control up to 8000network elements from a single networkmanagement central point.

LIN

ER

UN

NE

R S

OLU

TIO

NS


4

LineRunner SHDSL LCM/DTM


LCM/DTM modules are the new generation of the LineRunner SHDSL classic units.

SHDSL LCM is the central offi ce module for classic subracks. The module is designed for mixed operation with all "Classic" transmis-sion modules in a subrack. The line card can be equipped with an Ethernet port as an option for 4.6 Mbps.

SHDSL DTM is the designation of the desktops. Two versions are available. A metal housing (DTM-M) or a plastic housing (DTM). It provides a G.703 interface (120 ohms) and a slot for an optional user interface. G.703 (75 ohms), X.21, V.24, V.35, V.36 and Ethernet are available.

Applications

LAN Interconnection

You can link your company network without using leased lines. Employ our DTM with the MOD Ethernet in your central and remote branches or buildings to establish Ethernet connection with max. 4.6 Mbps.

Cellular Access Network

Link your GSM/UMTS base stations and BTS/Node B in city areas with small cells using a cost-effective E1 connection.

At all X/V interfaces subbitrates between 600 bps and 56.4 kbps can be confi gured in addition (dependent from the optional user interface) besides the n x 64 kbps transmission rates.

Whenever employed as NT all modules can be remotely supplied by the central LT unit. In addition a DC current source or the normal mains can supply the DTM modules.

Each desktop can be equipped with an optional remote supply module, so it can remotely supply a NT or regenerator. 1-pair or 2-pair versions are available as.

SHDSL DTM desktops are employed as net-work terminations for the Multi-Service Access Platforms MileGate and UMUX.


5

LIN

ER

UN

NE

R D

SL L

CM

/DTM

LineRunner SHDSL LCM/DTM provides you with a bandwidth of max. 4.6 Mbps via the optional Ethernet application interface.

LineRunner SHDSL DTM is the compact new network termination for leased lines with the Multi-Service Access Multiplexer UMUX. A maximum of 128 leased lines can be mul-tiplexed on one STM-4 interface. Combine UMUX and LineRunner SHDSL DTM for highly fl exible SHDSL transmission networks for a variety of applications. For further information on the UMUX family please refer to the UMUX product information.

A maximum of 2 regenerators (with complete management capability and remote supply) can be integrated in the transmission routes. The outdoor housing is prepared for installation of LineRunner transmission technology even in the toughest of environmental conditions.

4,6 Mbps

Confi gurations


6


Subracks Line Card

Desktops

Regenerators

SRV

V.36

V.35 via optional adapter

37-pin D-Sub jack

9 height units (HU)

16 Line Cards

SRS2

G.703 (120 ohms)

X.21

15-pin D-Sub jack

8 height units (HU)

16 Line Cards

SRA2

G.703 (75 ohms)

BNC jacks

8 height units (HU)

16 Line Cards

Regenerators

SHDSL

1-pair or 2-pair

Remote supply

Management function

Further Components for Regenerators

Housings for regenerators (see page 7)

SHDSL LCM

Data transmission with up to 4.6 Mbps

1-pair or 2-pair transmission system

Remote supply

Rate adaptive

Optional Ethernet port

ITU-T G.991.2

Desktop DTM/DTM-M

SHDSL line card included

1-pair or 2-pair transmission system

RS-232 management interface

G.703 (120 ohms) user interface

With AC (90 V ... 265 V) or DC (32 V ... 72 V) power supply

Option

Remote supply voltage for REG/NT

Optional User Interface

Ethernet 1-port bridge

Ethernet 4-port switch

G.703 (75 ohms)

X.21

V.35

V.36

X.21 with subrates

V.24 with subrates

V.35 with subrates

V.36 with subrates


7

LIN

ER

UN

NE

R D

SL L

CM

/DTM

Power Supply Adapters

Regenerator Housings

LineRunner COD

For 2 x 1-pair or 1 x 2-pair regenerators

IP code IP54

Lockable

For outdoor installation

LineRunner CID


IP code IP21

For indoor installation

LineRunner CUD


IP code IP68

For underground installation

LineRunner LPS3

For SCADA NG

Primary voltage 230 V

Mounting Brackets for DTM-M

Mounting Brackets

For LineRunner DTM-M

For installation in 19“ or ETSI subracks

LineRunner CUG1


IP code IP68

For underground installation

LineRunner LPS2

For DC version of SHDSL DTMs

Primary voltage 230 V


8

LineRunner SCADA NG

LineRunner SCADA NG (SCADA = Supervisory Control and Data Acquisition) is the broadband transmission system for reliable and cost-effective data transmission with rates up to 5.7 Mbps in telecontrol systems.

LineRunner SCADA NG is a new generation multidrop system: Data is exchanged via a net-work with several stations connected in series. Up to 63 LineRunner SCADA NG can transmit data between the single stations on a common transmission route.

LineRunner SCADA NG is a modular system that can transmit data on different transmission media (copper pairs, optical fi bre or PDH/SDH

Confi gurations

Three user interfaces are available for each LineRunner SCADA NG. A serial interface for low bandwidths and two Ethernet interfaces for large volumes of data. In each LineRunner SCADA NG with exchangeable line interfaces you can implement the change from one trans-mission medium to another.

RS-232

10BaseT

10/100BaseT

Line Interface 1

Copper pair

Optical fi bre

SDH/PDH network

Line Interface 2

Copper pair

Optical fi bre

SDH/PDH network

Applications

Use LineRunner SCADA NG to link control computers for traffi c lights to a master compu-ter in the central offi ce.

In this way the transmission route using multi-drop procedures reduces costs in comparison to point-to-point connections. Because of the ring architecture your system is protected against line disruption (e.g. during excava-tions).

LineRunner SCADA NG transmits different application data simultaneously over a trans-mission route. Video and control data can be transmitted via RS-232 and Ethernet at the same time.

Because it is so robust it can be used in rough environments, e.g. railroads and transport aut-hority facilities.

networks). Each LineRunner SCADA NG has two exchangeable line interfaces.

Computers can be connected via a serial inter-face and a maximum of two Ethernet inter-faces.

LineRunner SCADA NG can be operated in extreme environmental conditions. It can be deployed in temperatures ranging from -25° C to +70° C.

LineRunner SCADA NG is resistant to all kinds of shock, e.g. near railroads (according to EN 300019-2-3) and can be operated in envi-ronments with high levels of electro-magnetic interference.


9

LIN

ER

UN

NE

R S

CA

DA

NG

Line Interfaces

SCADA NG

Basic module

For up to two line interfaces

2 x Ethernet (10BaseT and 10/100BaseT)

1 x RS-232

Management port

SNMP agent

Installation Frame MF3

Frame for installation in subracks

For 2 LineRunner SCADA NG

SHDSL Line Interface

According to ITU-T 991.2

1-pair transmission

LT/NT termination

Data rate max. 5.7 Mbps

OF1S Line Interface

Optical transmission via one monomode optical fi bre

LT/NT termination

Laser class 1

Data rate max. 2 Mbps

SCADA NG BMD

E1 Line Interface

G.703/G.704

2 Mbps

Range approx. 0.4 km

Master/slave switch

Data rate 2 Mbps

OF1L Line Interface

Optical transmission via one monomode optical fi bre, wavelength multiplexing

LT and NT module

Laser class 1

Data rate max. 2 Mbps

SCADA NG RFS/RPS SCADA NG RFS

Generates wetting current or power supply voltage

Transmission via 1 or 2 copper pairs

Direct connection to SCADA NG possible

You can supply a remote unit with voltage or wetting current via the LineRunner SCADA NG RPS. Transmission is performed via the SHDSL route on max. two separate copper pairs.

The LineRunner SCADA RPS then provides the voltages for max. two modules again. SCADA NG RPS

Transforms remote power

Connection of one or two units

Maximum power supply: 8 W

Mounting Backet MB19

For 19 " racks

With ground clamp


10

Confi gure modules on site locally with Line-Runner ASMOS CT. Installed on a laptop you can access modules via the Ethernet RS-232 interface. Even local access to subracks via an SMU/SDU is possible.

ASMOS

Desktop

Subrack with SMU/SDU and

transmission line cards

Three versions customised to the particular application are available:

LineRunner ASMOS CT

This ASMOS version is designed for local confi -guration with laptops.

LineRunner ASMOS

This ASMOS version is designed to confi gure and monitor up to 1,000 modules from a cen-tral offi ce.

LineRunner ASMOS Pro

This ASMOS version is designed for employ-ment in large installations. The ASMOS server accesses the modules, the ASMOS client serves the user to operate the modules and the data base manages the individual attributes of the modules.

LineRunner ASMOS

LineRunner ASMOS

LineRunner ASMOS is the network manage-ment system for all LineRunner modules deve-loped by KEYMILE.

LineRunner ASMOS is designed for confi gu-ration and monitoring of LineRunner DSL and LineRunner SCADA systems.

The simple user interface is designed to record and evaluate all unit states fast and cost-effec-tively. You can prioritise any fault reports using the confi gurable alarm system.

One or several subracks can be connected via IP to the central offi ce using the SMU manage-ment units.

LineRunner ASMOS Pro manages up to 8,000 LineRunner modules at the same time. LineRunner ASMOS can be installed on modern PCs with Windows® XP Professional or Windows 2003 Server.

Confi gurations


11

LIN

ER

UN

NE

R A

SMO

S

LineRunner ASMOS Pro is designed to manage even large networks. ASMOS server and the data base can be distributed on two PCs. Up to 10 ASMOS clients can access the modules at the same time. All accesses are managed using Microsoft® COM/DCOM. An extensive system of access rights protects your application against unauthorised access.

Application

Management Module

SMU

For classic subracks

Manages up to eight subracks

Suitable for SNMP agent

Access via RS-232/ Ethernet

For central access

Confi guration Module

SDU

For classic subracks

Access via RS-232

For local access

ASMOS Pro ASMOS ASMOS CTManageable modules 8000 1000 128Manageable SMUs 128 32 1Management interface Ethernet Ethernet Ethernet/seriellMax. number of clients accessing at the same time 10 – –

Management module used SMU/SMU HL SMU/SMU HL SMU/SMU HL

Comparison of LineRunner ASMOS Versions

SMU HL

Manages up to 16 desktops

Access via RS-232/Ethernet

For central access to individual desktops


WW

W.K

EY

MIL

E.C

OM

IN

FO@

KE

YM

ILE

.CO

M

© K

EYM

ILE

2008

-02-

12 V

006.

All

right

s re

serv

ed. O

ur p

rod

ucts

are

sub

ject

to

cont

inuo

us d

evel

opm

ent

and

we

rese

rve

the

right

to

amen

d s

pec

ifi ca

tions

with

out

notic

e.

Headquarters

Austria

KEYMILE International GmbH

Richard-Strauss-Straße 431230 ViennaTelefon +43 1 610 20-0Fax +43 1 610 20-2356

With subsidiaries worldwide and a global network of partners, we serve customers in over 100 countries.

AUSTRALIA • AUSTRIA • BRAZIL • CHINA • CZECH REPUBLICFRANCE • GERMANY • HUNGARY • ITALY • POLAND • RUSSIASPAIN • SWITZERLAND • THE NETHERLANDS • UNITED KINGDOM

Find your local contact on www.keymile.com


Date post:	09-Mar-2018
Category:	Documents
Upload:	lythuan
View:	219 times
Download:	4 times

LineRunner Product Overview - Saudi...

Documents