+ All Categories
Home > Documents > Linha Bass SW11A - Rev 00-03-07 - Iris€¦ · Title Linha Bass SW11A - Rev 00-03-07 Author:...

Linha Bass SW11A - Rev 00-03-07 - Iris€¦ · Title Linha Bass SW11A - Rev 00-03-07 Author:...

Date post: 19-Oct-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
The subwoofers 8” (4 Ohms), 10” and 12” (4 or 4+4 ohms) impedance and 120, 200 and 250W RMS, respective powers. Specially designed to reproduce the frequencies extremely low situated at the audible spectrum limit, making them the best choice for the reproduction of the deep bass range on automotive systems. The midbass 6" low profile, specially designed to reproduce the midbass frequencies from 60 Hz, the midbass 6” has 4 ohms impedance and 70W RMS. Line Bass characteristics: The cone is made of metallic sislver injected polypropylene. The surround is made of a modern ITR technology (Injected Thermoplastic Rubber) offering high compliance and resilience, specially developed to damp the standing waves. The reinforced steel frame provides the subwoofers with higher structural rigidity and has epoxy finishing. A plastic ring covers the magnetic assembly giving the product an excellent look and mechanical structure. The spider is made of impregnated Policotton fiber, specially developed for this application, providing the moving system with the necessary stiffness to properly control cone excursion and minimize distortion. 0 0 0 0 0 0 Dust cap with innovative appearance. 1 2 Power handling specifications refer to normal speech and/or music program, reproduced by an amplifier producing no more than 5% distortion. Power is calculated as true RMS voltage squared divided by the nominal impedance of the loudspeaker. Brazilian Standard NBR 10.303, with pink noise during 2 hours uninterrupted. Nominal diameter . . . . . . . . . . . . . . . . . . . . . . . mm (in) Nominal impedance . . . . . . . . . . . . . . . . . . . . . . . . . . Power handling MAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W RMS (NBR 10.303) . . . . . . . . . . . . . . . . . . . . . W Sensitivity (1W@1m) . . . . . . . . . . . . . . . . . . . . dB SPL Frequency response @ -10 dB . . . . . . . . . . . . . . . . Hz Volume displaced by woofer . . . . . . . . . . . . . . . . . l (ft ) Magnet weight . . . . . . . . . . . . . . . . . . . . . . . . . . . g (oz) Voice coil diameter . . . . . . . . . . . . . . . . . . . . . . mm (in) Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g (lb) W 1 2 3 TECHNICAL SPECIFICATIONS 8SW11A 10SW11A 10SW11A-DVC 12SW11A 12SW11A-DVC 254 (10) 4 400 200 87 45 to 3,000 1.3 (0.046) 920 (32.45) 38 (1.5) 3,230 (7.12) 254 (10) 4+4 200+200 100+100 87 35 to 3,000 1.3(0.046) 920 (32.45) 38 (1.5) 3,230 (7.12) 305 (12) 4 500 250 88 35 to 2,500 2.2 (0.078) 1,240 (43.74) 46 (1.81) 4,200 (9.26) 204 (8) 4 240 120 87 40 to 2,000 0.8 (0.028) 620 (21.87) 38 (1.5) 1,920 (4.22) 305 (12) 4+4 250+250 125+125 87 35 to 2,500 2.2 (0.078) 1,240 (43.74) 46 (1.81) 4,200 (9.26) 6MB11A 152 (6) 4 140 70 88 60 to 5,000 0.6(0.021) 340(12) 31.7(1.25) 860(1.89) A variation of ± 20% is allowed. Fs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hz Re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Qms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Qes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Qts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I (ft ) Ref Eff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . % Sd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . m (in ) Vd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cm (in ) Xmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm (in) l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T.m W 3 2 2 3 3 b THIELE-SMALL PARAMETERS 8SW11A 10SW11A 10SW11A-DVC 12SW11A 12SW11A-DVC 38 3.6 13.28 1.15 1.06 50.51 (1.77) 0.23 0.035 (54.3) 140 (8,54) 4.5 (0.18) 6.76 35 1.8 13.59 0.71 0.67 52 (1.83) 0.32 0.035 (54.3) 155.8 (9.51) 4.5 (0.18) 6.1 36 3.7 12.96 1.06 0.98 66 (2.32) 0.28 0.052 (80.6) 312.0 (19.0) 6.0 (0.23) 9.4 35 3.2 9.46 0.62 0.59 53(1.88) 0.36 0.022 (34.1) 77.9 (4.75) 3.5 (0.14) 8.1 34 1.8 12.89 0.65 0.61 67(2.36) 0.41 0.052 (80.6) 312.0(19.0) 6.0 (0.23) 8.6 6MB11A 77 3.7 5.0 1.9 1.4 10.4(0.36) 0.3 0.014(21.7) 24.5(1.49) 1.75(0.07) 3.5 8SW11A 6MB11A 10SW11A 10SW11A-DVC 12SW11A 12SW11A-DVC 6MB11A / 8SW11A 10SW11A 12SW11A 10SW11A-DVC / 12SW11A-DVC / / Dimensões em mm. 6MB11A 8SW11A 10SW11A / 10SW11A-DVC (8x) 5,5x8 ø 318 ø 292 13 60 71 143 ø 178 ø 278 (4x) 5x7 ø 204 ø 194 8 ø 141 ø 182 102 39 54 (8x) 5,5x8 ø 264 ø 243 10 53 63 126 ø 158 ø 227 12SW11A / 12SW11A-DVC 166 O 156 92 O 143 O 57 34 18 5
Transcript
  • The subwoofers 8” (4 Ohms), 10” and 12” (4 or 4+4 ohms) impedanceand 120, 200 and 250W RMS, respective powers. Specially designed toreproduce the frequencies extremely low situated at the audible spectrumlimit, making them the best choice for the reproduction of the deep bassrange on automotive systems. The midbass 6" low profile, specially designedto reproduce the midbass frequencies from 60 Hz, the midbass 6” has 4ohms impedance and 70W RMS.

    Line Bass characteristics:The cone is made of metallic sislver injected polypropylene.

    The surround is made of a modern ITR technology (InjectedThermoplastic Rubber) offering high compliance and resilience,specially developed to damp the standing waves.The reinforced steel frame provides the subwoofers with higherstructural rigidity and has epoxy finishing.A plastic ring covers the magnetic assembly giving the product anexcellent look and mechanical structure.The spider is made of impregnated Policotton fiber, speciallydeveloped for this application, providing the moving system with thenecessary stiffness to properly control cone excursion and minimizedistortion.

    0

    0

    0

    0

    0

    0

    Dust cap with innovative appearance.

    1

    2

    Power handling specifications refer to normal speech and/or music program, reproduced by an amplifier producing no more than 5% distortion. Power is calculated as true RMS voltage squared divided by the nominalimpedance of the loudspeaker.Brazilian Standard NBR 10.303, with pink noise during 2 hours uninterrupted.

    Nominal diameter . . . . . . . . . . . . . . . . . . . . . . . mm (in)

    Nominal impedance . . . . . . . . . . . . . . . . . . . . . . . . . .Power handling

    MAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WRMS (NBR 10.303) . . . . . . . . . . . . . . . . . . . . . W

    Sensitivity (1W@1m) . . . . . . . . . . . . . . . . . . . . dB SPLFrequency response @ -10 dB . . . . . . . . . . . . . . . . HzVolume displaced by woofer . . . . . . . . . . . . . . . . . l (ft )Magnet weight . . . . . . . . . . . . . . . . . . . . . . . . . . . g (oz)Voice coil diameter . . . . . . . . . . . . . . . . . . . . . . mm (in)Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . g (lb)

    W

    1

    2

    3

    TECHNICAL SPECIFICATIONS 8SW11A 10SW11A 10SW11A-DVC12SW11A 12SW11A-DVC

    254 (10)4

    400200

    8745 to 3,0001.3 (0.046)

    920 (32.45)38 (1.5)

    3,230 (7.12)

    254 (10)4+4

    200+200100+100

    8735 to 3,0001.3(0.046)

    920 (32.45)38 (1.5)

    3,230 (7.12)

    305 (12)4

    500250

    8835 to 2,5002.2 (0.078)

    1,240 (43.74)46 (1.81)

    4,200 (9.26)

    204 (8)4

    240120

    8740 to 2,0000.8 (0.028)

    620 (21.87)38 (1.5)

    1,920 (4.22)

    305 (12)4+4

    250+250125+125

    8735 to 2,5002.2 (0.078)

    1,240 (43.74)46 (1.81)

    4,200 (9.26)

    6MB11A

    152 (6)4

    1407088

    60 to 5,0000.6(0.021)

    340(12)31.7(1.25)860(1.89)

    A variation of ± 20% is allowed.

    Fs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hz

    Re. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Qms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Qes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Qts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Vas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I (ft )Ref Eff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . %Sd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . m (in )Vd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cm (in )Xmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . mm (in)

    l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T.m

    W

    3

    2 2

    3 3

    b

    THIELE-SMALL PARAMETERS 8SW11A 10SW11A 10SW11A-DVC12SW11A 12SW11A-DVC

    383.6

    13.281.151.06

    50.51 (1.77)0.23

    0.035 (54.3)140 (8,54)4.5 (0.18)

    6.76

    351.8

    13.590.710.67

    52 (1.83)0.32

    0.035 (54.3)155.8 (9.51)

    4.5 (0.18)6.1

    363.7

    12.961.060.98

    66 (2.32)0.28

    0.052 (80.6)312.0 (19.0)

    6.0 (0.23)9.4

    353.2

    9.460.620.59

    53(1.88)0.36

    0.022 (34.1)77.9 (4.75)

    3.5 (0.14)8.1

    341.8

    12.890.650.61

    67(2.36)0.41

    0.052 (80.6)312.0(19.0)

    6.0 (0.23)8.6

    6MB11A

    773.75.01.91.4

    10.4(0.36)0.3

    0.014(21.7)24.5(1.49)1.75(0.07)

    3.5

    8SW11A6MB11A

    10SW11A

    10SW11A-DVC

    12SW11A

    12SW11A-DVC

    6MB11A / 8SW11A 10SW11A 12SW11A

    10SW11A-DVC / 12SW11A-DVC

    / /

    Dimensões em mm.

    6MB11A 8SW11A 10SW11A / 10SW11A-DVC

    (8x)5,5x8

    ø 318

    ø 292 13 60 71

    143

    ø 1

    78

    ø 2

    78

    (4x)5x7

    ø 204

    ø 194 8

    ø 1

    41

    ø 1

    82

    102

    39 54

    (8x)5,5x8

    ø 264

    ø 243 10 53 63

    126

    ø 1

    58

    ø 2

    27

    12SW11A / 12SW11A-DVC

    166O

    156

    92

    O 143

    O

    57

    34185

  • SUGGESTED ENCLOSURES

    CLOSED BOX VENTED BOX

    MODELS Duct (s)

    Qty Diam. x lenght (cm)

    8”10”12”

    112738

    223246

    112

    7.5 x 157.5 x 127.5 x 25

    Internal Volume(liters)

    Internal Volume(liters)

    The suggested enclosure volumes are related to only one speaker,including woofer and duct(s) displaced volume.

    For enclosure with more than one speaker, it is necessary to multiply thesuggested volume and duct(s) by the quantity of speakers and build themwith separeted chambers (internal division).

    A

    B

    C

    RECTANGULAR BOX TRAPEZOID RECTANGULAR BOX

    A

    B

    C

    D

    ENCLOSURES INTERNAL VOLUME CALCULATION INSTRUCTIONS

    21000

    ( (C + DA x B xInternal Volume=

    A, B, C and D are internal dimensions(in cm). The internal volume result isgiven in liters.

    Internal Volume=

    A, B and C are internal dimensions(in cm). The internal volume resultis given in liters.

    1000

    A x B x C

    8SW11A

    SOFTWARE SIMULATED REPONSE CURVES

    Closed Box.Vented Box.

    9

    6

    0

    -6

    -12

    -18

    -24

    -30

    -36

    5 10 50 100 500

    Ref Eff

    Hz

    dB

    10SW11A 10SW11A-DVC/SOFTWARE SIMULATED RESPONSE CURVES

    Closed Box.Vented Box.

    9

    6

    0

    -6

    -12

    -18

    -24

    -30

    -36

    5 10 50 100 500

    Ref Eff

    Hz

    dB

    12SW11A 12SW11A-DVC/SOFTWARE SIMULATED RESPONSE CURVES

    Closed Box.Vented Box.

    9

    6

    0

    -6

    -12

    -18

    -24

    -30

    -36

    5 10 50 100 500

    Ref Eff

    Hz

    dB

    6MB11A / 8SW11A 10SW11A 12SW11A

    10SW11A-DVC / 12SW11A-DVC

    / /

    NA 00 03 07

    www.seleniumloudspeakers.comSpecifications subject to changewithout prior notice.

    Code: Rev.: - /


Recommended