+ All Categories
Home > Documents > link.springer.com · Web viewHighlights: This investigation studies the dry sliding wear behaviour...

link.springer.com · Web viewHighlights: This investigation studies the dry sliding wear behaviour...

Date post: 09-Apr-2018
Category:
Upload: habao
View: 215 times
Download: 3 times
Share this document with a friend
2
Highlights: This investigation studies the dry sliding wear behaviour of Mg matrix composites reinforced with Titanium carbide (TiC) and molybdenum disulphide (MoS 2 ) particulate up to 10%, were fabricated through powder metallurgy technique. The Hardness and wear resistance of the developed composites improves significantly as compared to that of the magnesium matrix due to the courteous effect offered by both the reinforcements. The wear loss and friction coefficient of the Mg-TiC composites was abridged by the accumulation of MoS 2 . Graphical Abstract:
Transcript
Page 1: link.springer.com · Web viewHighlights: This investigation studies the dry sliding wear behaviour of Mg matrix composites reinforced with Titanium carbide (TiC) and molybdenum disulphide

Highlights: This investigation studies the dry sliding wear behaviour of Mg matrix composites

reinforced with Titanium carbide (TiC) and molybdenum disulphide (MoS2)

particulate up to 10%, were fabricated through powder metallurgy technique.

The Hardness and wear resistance of the developed composites improves significantly

as compared to that of the magnesium matrix due to the courteous effect offered by

both the reinforcements.

The wear loss and friction coefficient of the Mg-TiC composites was abridged by the

accumulation of MoS2.

Graphical Abstract:


Recommended