Positioning SystemsPositioning Components

Linear & Rotary

Single Axis

Multiple Axis

Screw Driven

Belt Driven

Standard Tables

Custom Tables

Shaft Assemblies

Single Rail

TWIN RAIL®

Carriage Assemblies

Linear Bearings

Ball Screw Assemblies

Registered by UL to ISO 9001:2000 Certificate No. A6916

For over 35 years LINTECH hasdesigned, engineered, and manufacturedpositioning components and systems foruse in a wide range of applications. Withour commitment to service, technicalsupport, in-house manufacturing, andquick deliveries, LINTECH can provideyou with a high quality product for yourpresent, or next automation task.

(800) 435-7494 (626) 358-0110 fax: (626) 303-2035

Manufacturer of Standard & Custom Positioning Components & Systems

Web Site: www.LintechMotion.com E-Mail: Lintech@LintechMotion.com

Custom Assemblies

1845 Enterprise Way, Monrovia, CA 91016

LIN ECH ®T

110 series belt driven positioning tables

Travel lengths from 1 to 45 inches

5.5 inch wide by 2.375 inch tall

100 series square rail positioning tables

Load capacities from 100 to 3100 lbs

Travel lengths from 2 to 60 inches

3.5 inch wide by 2.375 inch tall

STANDARD PRODUCTSMade in the U.S.A.

130 series square rail positioning tables

Load capacities from 25 to 200 lbs

Travel lengths from 2 to 60 inches

2.875 inch wide by 2.375 inch tall

120 &140 belt driven positioning tables

Speeds to 118 inches per second

Travel lengths from 4 to 120 inches

3.5 & 2.875 inch wide by 3.0 inch tall

Hypilon Polyester Bellows

160 series square rail positioning tables

Load capacities from 300 to 5600 lbs

Travel lengths from 6 to 60 inches

5.5 inch wide by 3.0 inch tall

90 series round rail positioning tables

Load capacities from 200 to 3300 lbs

Travel lengths from 6 to 60 inches

6 & 12 inch carriages available

170 series square rail positioning tables

Load capacities from 300 to 12,600 lbs

Travel lengths from 6 to 60 inches

5.5 inch wide by 3.0 inch tall

180 series belt driven positioning tables

Speeds to 118 inches per second

Travel lengths from 6 to 108 inches

5.5 inch wide by 3.0 inch tall

STANDARD PRODUCTSMade in the U.S.A.

300 series rotary positioning tables

Load capacities from 30 to 200 lbs

45 & 180 to 1 gear ratios

6, 8, 10, & 12 inch table tops

400 series rotary positioning tables

Load capacities to 1000 lbs

Large 4.5 inch thru hole

90, 180, 270, & 360 to 1 gear ratios

150, 200 & 250 series tables

Load capacities from 600 to 26000 lbs

Travel lengths from 6 to 62 inches

4, 6, 8, & 12 inch carriages

550 series belt driven positioning tables

Load capacities from 200 to 9000 lbs

Travel lengths from 1 to 30 feet

Speeds to 197 inches per second

SA series single shaft assemblies

Lengths from 6 to 192 inches

Shaft diameters from 0.5 to 2.0 inches

Rockwell 60C hardened & ground shafts

Carriage's compatible with TRSA series

6, 12, 18, 24, & 30 inch long carriages

Load capacities from 180 to 18000 lbs

TRSA series TWIN RAIL shaft assemblies

Rockwell 60C hardened & ground shafts

Shaft diameters from 0.5 to 2.0 inches

Lengths from 6 to 192 inches

TRCA assemblies, SLBO, & DLBO series

Ball Screw assemblies

English & Metric leads & diameters

Lengths to 137 inches

Diameters from .5 to 1.5 inches

CUSTOM POSITIONING SYSTEMS

WHERE TO PURCHASE LINTECH PRODUCTS

340 page catalog detailslinear positioning tablesthat are either screw orbelt driven. Twelve (12)different models tochoose from with loadcapacities from 25pounds (11 kg) to16,600 pounds (7530kg). Also, two (2) dif-ferent rotary tables tochoose from.

Linear & Rotary Positioning Systems Single & TWIN RAIL® Shaft AssembliesHardened and groundshaft assemblies inlengths from 6 inches to192 inches. Diametersfrom 1/2 inch to 4 inch.Pre-assembled carriageswith load capacitiesfrom 200 to 18,000 lbs.Custom assembliesavailable.

MOTION CONTROL PRODUCTS

LINTECH sells its positioning components and systems around the world, through a team ofexperienced Motion Control distributors. Each of these organizations have electrical and mechani-cal engineers on staff who are well trained on the capabilities of LINTECH products. Thesepeople stand ready to assist customers with their individual positioning needs and requirements.For the nearest distributor in your area call LINTECH or visist our web site.

Ball Screw AssembliesThree different types ofball screw assemblies -rolled, precision, andground ball screws.From 0.5 to 1.5 inch di-ameters with lengths to138 inches. English &Metric leads available.Simple, Fixed, andRigid supports in vari-ous combinations.