+ All Categories
Home > Documents > LIQUID WATERPROOFING ADMIX · Cemix® Liquid Waterproofing Admix is available in 1L, 2.5L. 5L, 20L...

LIQUID WATERPROOFING ADMIX · Cemix® Liquid Waterproofing Admix is available in 1L, 2.5L. 5L, 20L...

Date post: 22-Apr-2020
Category:
Upload: others
View: 12 times
Download: 0 times
Share this document with a friend
1
LIQUID WATERPROOFING ADMIX WATERPROOFING ADMIXTURE FOR CEMENT MIXES. DESCRIPTION: Cemix®Liquid Waterproofing Admixture improves the waterproofing properties of Cement Mixes. TYPICAL APPLICATION/USES: • Enhance waterproofing characteristics of plaster, screeds, toppings and other concrete substrates. ADVANTAGES: • Improves the waterproofing properties of Portland Cement. • Easy to use. • Durable – lasts as long as the life of the structure. • Increases the workability of the mix. • Does not affect normal cement properties. MIXING: Thoroughly agitate contents before use. Add Cemix®Liquid Waterproofing Admixture to the usual mixing water. Mix cement, sand and/or aggregates in the usual quantities. DOSAGE: Use at the rate of 1litre per 40kg bag of cement for all applications. Cemix®Liquid Waterproofing Admixture is supplied ready for use. LIMITATIONS: Ensure adequate ventilation. Do not use Cemix®Liquid Waterproofing Admixture in concrete or plaster that is in contact with drinking water. SAFETY Avoid contact with eyes & skin. Wear suitable protective clothing, gloves, eye protection & barrier cream. Wear a suitable dust mask. Wash thoroughly after handling & store any leftover material properly. FIRST AID Irrigate eyes & skin with plenty of water & seek medical advice immediately. SPILLS AND LEAKS: Keep out of sewers & storm water drains & dispose of any leftover material as trade waste in accordance with local authority guidelines. DISCLAIMER: Recommendations & advice regarding the use of this product are to be taken as a guide only. Other than as appears on this products packaging, CEMIX®LTD does not give any warranty express or implied as to the suitability of this product for your particular use, because the usage of this product is beyond the control of CEMIX® LTD. If you need advice concerning the use of suitability of this product for your particular application, please contact CEMIX®LTD first. APPLICATION: Add Cemix®Liquid Waterproofing Admixture to the mixing water for all work. CONCRETE: Normal concrete practice regarding mixing, placing and curing must be followed at all times. PLASTER: It is recommended that all work be done using a two coat method as follows: First Coat: A 10mm render of sand and cement with Cemix®Liquid Waterproofing Admixture in the mixing water. Second Coat: Build up to the required finished thickness – but not less than 20mm total thickness. The second coat must be applied not less than 24 hours after the first coat. REMEDIAL WORK: For all repair work, it is recommended that the existing surface be hacked to form a mechanical key, followed by the use of a bonding agent such as Cemix® Multibond or Cemix®Acrylbond. PACKAGING: Cemix®Liquid Waterproofing Admix is available in 1L, 2.5L. 5L, 20L & 210L. STORAGE & SHELF LIFE: Cemix®Liquid Waterproofing Admixture in a cool dry place and use within twelve (12) months. IMAGE 1L, 2.5L, 5L, 20L & 210L CEMIX LTD 19 ALFRED STREET ONEHUNGA 1061 AUCKLAND NEW ZEALAND 0800 ASK CEMIX WWW.CEMIX.CO.NZ CDS_004 | NO2001 | 02.5 | 005 | 020 | 210
Transcript
Page 1: LIQUID WATERPROOFING ADMIX · Cemix® Liquid Waterproofing Admix is available in 1L, 2.5L. 5L, 20L & 210L. STORAGE & SHELF LIFE: Cemix® Liquid Waterproofing Admixture in a cool dry

LIQUID WATERPROOFING ADMIXWATERPROOFING ADMIXTURE FOR CEMENT MIXES.

DESCRIPTION:Cemix® Liquid Waterproofing Admixture improves the waterproofing properties of Cement Mixes.

TYPICAL APPLICATION/USES:• Enhance waterproofing characteristics of plaster, screeds, toppings and other concrete substrates.

ADVANTAGES:• Improves the waterproofing properties of Portland Cement.• Easy to use.• Durable – lasts as long as the life of the structure.• Increases the workability of the mix.• Does not affect normal cement properties.

MIXING:Thoroughly agitate contents before use. Add Cemix® Liquid Waterproofing Admixture to the usual mixing water. Mix cement, sand and/or aggregates in the usual quantities.

DOSAGE:Use at the rate of 1litre per 40kg bag of cement for all applications. Cemix® Liquid Waterproofing Admixture is supplied ready for use.

LIMITATIONS:Ensure adequate ventilation. Do not use Cemix® Liquid Waterproofing Admixture in concrete or plaster that is in contact with drinking water.

SAFETYAvoid contact with eyes & skin. Wear suitable protective clothing, gloves, eye protection & barrier cream. Wear a suitable dust mask. Wash thoroughly after handling & store any leftover material properly.

FIRST AIDIrrigate eyes & skin with plenty of water & seek medical advice immediately.

SPILLS AND LEAKS:Keep out of sewers & storm water drains & dispose of any leftover material as trade waste in accordance with local authority guidelines.

DISCLAIMER:Recommendations & advice regarding the use of this product are to be taken as a guide only. Other than as appears on this products packaging, CEMIX® LTD does not give any warranty express or implied as to the suitability of this product for your particular use, because the usage of this product is beyond the control of CEMIX® LTD. If you need advice concerning the use of suitability of this product for your particular application, please contact CEMIX® LTD first.

APPLICATION:Add Cemix® Liquid Waterproofing Admixture to the mixing water for all work.

CONCRETE: Normal concrete practice regarding mixing, placing and curing must be followed at all times. PLASTER: It is recommended that all work be done using a two coat method as follows: First Coat: A 10mm render of sand and cement with Cemix® Liquid Waterproofing Admixture in the mixing water. Second Coat: Build up to the required finished thickness – but not less than 20mm total thickness. The second coat must be applied not less than 24 hours after the first coat.

REMEDIAL WORK: For all repair work, it is recommended that the existing surface be hacked to form a mechanical key, followed by the use of a bonding agent such as Cemix® Multibond or Cemix® Acrylbond. PACKAGING: Cemix® Liquid Waterproofing Admix is available in 1L, 2.5L. 5L, 20L & 210L.

STORAGE & SHELF LIFE:Cemix® Liquid Waterproofing Admixture in a cool dry place and use within twelve (12) months.

IMAGE

1L, 2.5L, 5L, 20L & 210L

CEMIX LTD19 ALFRED STREETONEHUNGA 1061 AUCKLAND NEW ZEALAND

0800 ASK CEMIXWWW.CEMIX.CO.NZ

CDS_004 | NO2001 | 02.5 | 005 | 020 | 210

Recommended