METHOD TO FIX HP LASERJET CM3530

50.8 FUSER ERROR

https://www.bhitmagazine.com.ng/writers/how-to-do-hp-deskjet-3755-wifi-setup/#https://www.bhitmagazine.com.ng/writers/how-to-do-hp-deskjet-3755-wifi-setup/#

METHOD TO FIX HP LASERJET CM3530

50.8 FUSER ERROR

FOR FUSERS, HP USED TO ONLY SEND YOU ONE OR TWO GENERAL

ERROR CODES. THEY’RE BEING MORE PRECISE IN-DEPTH NOW,

MAKING IT EASIER TO TROUBLESHOOT ERRORS LIKE THE HP

LASERJET CM3530 50.8 FUSER ERROR AND POTENTIALLY FIXING THE

PROBLEM WITHOUT BUYING UNNECESSARY PIECES. SURGE ARREST

OR POWER STRIPS ARE ONE THING THAT HAS BEEN KNOWN TO

TRIGGER ISSUES WITH FUSERS. EVERY DAY, MORE AND MORE

ELECTRICAL DEVICES ARE USED IN WORKPLACES. POWER STRIPS

ARE USED TO ENSURE THAT ANYTHING CAN BE PLUGGED IN AND

USED. LASERJETS ARE SIMILAR TO LARGE HEATERS IN THAT THEY

CONSUME A LOT OF ELECTRICITY, SO THEY MUST BE PLUGGED INTO

THEIR OWN SOCKET WITH NO OTHER HEATING DEVICES NEARBY.

https://www.bhitmagazine.com.ng/writers/how-to-do-hp-deskjet-3755-wifi-setup/#https://www.bhitmagazine.com.ng/writers/how-to-do-hp-deskjet-3755-wifi-setup/#https://www.hpsupportphonenumbers.com/how-to-fix-hp-envy-4500-error-code-oxc4eb827f-in-all-in-one-hp-printer/https://www.hpsupportphonenumbers.com/fix-hp-laserjet-cm3530-50-8-fuser-error/https://www.hpsupportphonenumbers.com/how-to-fix-hp-envy-4500-error-code-oxc4eb827f-in-all-in-one-hp-printer/https://www.hpsupportphonenumbers.com/how-to-fix-hp-envy-4500-error-code-oxc4eb827f-in-all-in-one-hp-printer/

TROUBLESHOOTING THE HP LASERJET CM3530 50.8 FUSER ERROR

1. VERIFY THE FUSER IS INSTALLED CORRECTLY AND FULLY SEATED.

2. CHECK THAT CONNECTOR J6007 ON THE FUSER IS SEATED CORRECTLY.

REPLACE THE CONNECTOR AS NECESSARY.

3. TURN OFF THE PRINTER.

4. REMOVE THE FUSER.

5. IF THERE IS NO CONDUCTION IN THE SUB THERMISTOR, MEASURE THE

RESISTANCE BETWEEN FUSER CONNECTORS J6007LA-1 AND J6007LA-3. IF

THE RESISTANCE IS NOT 100 OHMS TO 3 MOHMS, REPLACE THE FUSER.

6. IF THERE IS NO CONDUCTION IN THE FUSER HEATER, MEASURE THE

RESISTANCE BETWEEN FUSER CONNECTORS J6007LAF-1 AND J6007-2. IF

THE RESISTANCE IS NOT 5 OHMS TO 1 OHMS (100 TO 127 V) OR 20 OHMS TO

1 OHMS (220 TO 240 V), REPLACE THE FUSER

7. UPGRADE THE DC CONTROLLER FIRMWARE.

8. REPLACE THE DC CONTROLLER PCA.

https://www.fortwayneprinterrepair.com/wordpress/product/oem-new-kyocera-3-390-607-33-906-70-paper-feed-components

METHOD 2-

1. TURN THE MACHINE OFF THEN BACK ON. SUDDEN INTERRUPTIONS

IN POWER CAN CAUSE ERRORS LIKE THIS. THUNDERSTORMS,

WINDING DAYS, UTILITY WORK NEARBY ARE CAUSES FOR POSSIBLE

SUDDEN AND QUICK POWER OUTAGES THAT CAN LEAD TO

INCORRECT FUSER TEMPERATURE READINGS.

2. CHECK THE POWER SOURCE. FOR TESTING PURPOSES MAKE SURE

THAT YOU HAVE THE MACHINE PLUGGED STRAIGHT INTO A WALL

OUTLET.

3. IF YOU JUST REPLACED THE FUSER MAKE SURE THAT IT IS THE

RIGHT VOLTAGE FOR THE MACHINE.

4. REPLACE THE FUSING ASSEMBLY.

WE PLEDGE THE TEAM OF EXTREMELY QUALIFIED TECH-GEEKS TO

PROVIDE IMMEDIATE QUALITY SUPPORT FOR MICROSOFT WINDOWS

PROBLEMS. THEY WORK ROUND THE CLOCK AND HAVE THE

PROFOUND TECHNICAL KNOWLEDGE TO QUICKLY IDENTIFY YOUR

PRINTER PROBLEMS. OUR FEES ARE EXTREMELY NOMINAL IN

NATURE TO MEET THE REQUIREMENTS OF THE USER. SO, PLEASE DO

NOT HESITATE TO CALL HP SUPPORT PHONE NUMBER AND REMAIN

UP-TO-DATE WITH THEM.

visit us- https://www.hpsupportphonenumbers.com/fix-hp-laserjet-cm3530-50-8-fuser-error/

https://www.hpsupportphonenumbers.com/fix-hp-laserjet-cm3530-50-8-fuser-error/