Spare parts for:
This catalogue is automatically generated. Therefore, the sequence of the items might not be always shown at best.Updates will be issued in case of additionsand/or amendments.
<T2
GrindersT2>
This catalogue is automatically generated. Therefore, the sequence of the items might not be always shown at best.Updates will be issued in case of additionsand/or amendments.
Re
l. 2
01
6-0
33
01
40
6
Coffee grinders
Suitable for: Suitable for:
<|
1 2 5 1 1 6 9|>
FR A N KE L EFT G R IN D IN G BU R R S P A IR<|
1 2 5 1 1 8 4|>
G R IN D .BU R RS (P A IR ) N EC T A R Hø external 64 mm - ø internal 37 mm external ø 63.5 mm - internal ø 38 mm
thickness 8,5 mm - 3 fixing holes thickness 9 mm - 3 mounting holes
<|
1 2 5 1 1 8 3|>
G R IN D .BU R RS (P A IR )R H EA L H<|
1 2 5 1 1 9 0|>
G R IN D IN G BU RR S PA IR M A Z ZER R Hexternal ø 64 mm - internal ø 38 mm external ø 58 mm - internal ø 33,5 mm
thickness 9 mm - 3 mounting holes thickness 8.5 mm - 3 fastening holes for Grinder-dispenser (MAZZER) MINI
<|
1 2 5 1 1 5 6|>
G R IN D IN G BU RR S PA IR NEC TA -LA V A ZZA R H<|
1 2 5 1 1 7 1|>
G R IN D IN G BU RR S PA IR RH EA L Hexternal ø 63.5 mm - internal ø 38 mm external ø 54 mm - internal ø 33 mm
thickness 9 mm - 3 mounting holes thickness 8 mm - 3 fixing holes
<|
1 2 5 1 1 7 2|>
G R IN D IN G BU RR S PA IR RH EA L H<|
1 2 5 1 1 6 1|>
S C HA ER ER L EFT G R IN D ING BU R R S P A IRexternal ø 64 mm - internal ø 38 mm ø external 65 mm - ø internal 35 mm
thickness 9 mm - 3 fixing holes thickness 8,4 mm - 2 fixing holes
<|
1 2 5 1 1 5 7|>
T HER M O PL A N LEFT G RIN D IN G BU RR S PA IR<| |>
ø external 64 mm - ø internal 37 mm thickness 8,6 mm - 3 fixing holes
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
ANFIMT2>
<|
1 2 5 1 0 0 2|>
G R IN D IN G BU RR S A NFIM (P A IR ) L EFT<|
1 2 5 1 0 0 1|>
G R IN D IN G BU RR S A NFIN (P A IR ) L EFTexternal ø 64 mm - internal ø 37 mm external ø 54 mm - internal ø 32 mm
thickness 9 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Coffee grinder (ANFIM) CAIMANO ON DEMAND for Grinder-dispenser (ANFIM) BEST - SUPERBEST for Grinder-dispenser (ANFIM) CAIMANO - LUSSO for Grinder-dispenser (SPAZIALE) LUX800
ANFIM 64 ANFIM 54
<|
1 2 5 1 0 0 3|>
G R IN D IN G BU RR S A NFIN (P A IR ) L H<|
1 2 5 1 1 2 0|>
G R IN D IN G BU RR S PA IR AN FIM L Hexternal ø 75 mm - internal ø 43 mm external ø 50 mm - internal ø 30 mm
thickness 9 mm - 3 mounting holes thickness 7.6 mm - 3 mounting holes for Grinder-dispenser (ANFIM) for Coffee grinder (ANFIM) HAUSSELF CAIMANO SPECIAL450 AUTOMATICO for Grinder-dispenser (ANFIM) HAUS CAIMANO SPECIAL450 TIMER SPECIAL450 AUTOMATICO - SPECIAL450 TIMER SUPER CAIMANO - SUPERLUSSO for Grinder-dispenser (SPAZIALE) S/LUX450
ANFIM 75 ANFIM 75-SP ANFIM 50
<T2
ARISTARCOT2>
<|
1 2 5 1 0 1 8|>
G R IN D IN G BU RR S A RIST A R C O (PA IR) R IG HT<| |>
external ø 64 mm - internal ø 37 mm thickness 8.5 mm - 3 fixing holes for Grinder-dispenser (ARISTARCO) EMA75 - EMA80 SE/N
ARISTARCO 70111
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
ARISTARCOT2>
<|
1 2 5 1 0 0 6|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R H<|
1 2 5 1 0 0 7|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R Hexternal ø 58 mm - internal ø 34 mm external ø 84 mm - internal ø 45 mm
thickness 8 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (ARISTARCO) EMA80 for Grinder-dispenser (GAGGIA) MD85 for Grinder-dispenser (SAECO) MS85
ARISTARCO 70110 ARISTARCO 70113
<|
1 2 5 1 0 1 4|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R H<| |>
external ø 74 mm - internal ø 42.5 mm thickness 9 mm - 3 fixing holes for Grinder-dispenser (ARISTARCO) EMA80
ARISTARCO 70112
<T2
ASTORIA CMAT2>
<|
1 2 5 1 1 4 2|>
C O N IC A L GR IND IN G B UR R S C OM P A K (PA IR) RH<|
1 2 5 1 1 2 5|>
G R IN D .BU R RS A ST OR IA -M A H LK O NIG (P A IR ) L EFTexternal ø 68/49 mm - internal ø 41/13 mm external ø 65 mm - internal ø 38 mm
thickness 25 mm - 4 mounting holes thickness 8.4 mm - 2 mounting holes for Grinder-dispenser (COMPAK) K10 for Coffee grinder (ASTORIA CMA) K30 for Grinder-dispenser (MAHLKÖNIG) K30 for Grinder-dispenser (RENEKA) MK10
ASTORIA CMA 28217016 ASTORIA CMA 28530000 ASTORIA CMA 28530001 ASTORIA CMA 28530002
<|
1 2 5 1 9 2 7|>
G R IN D .BU R RS M A ZZER (P A IR) RH S IN GL E-P H.<|
1 2 5 1 0 5 6|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.external ø 83 mm - internal ø 49 mm external ø 64 mm - internal ø 37 mm
thickness 9.6 mm - 3 fixing holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (MAZZER) MAJOR for Grinder-dispenser (MAZZER) SUPERJOLLY MAJOR ELETTRONICO
ASTORIA CMA 28215 ASTORIA CMA 28213
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 9 3 0|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.<|
1 2 5 1 9 3 3|>
G R IN D .BU R RS M A ZZER (P A IR) RIG HT TH R EE-PHexternal ø 64 mm - internal ø 37 mm external ø 83 mm - internal ø 49 mm
thickness 8.4 mm - 3 fixing holes thickness 9.6 mm - 3 fixing holes for Grinder-dispenser (MAZZER) SUPERJOLLY for Grinder-dispenser (MAZZER) MAJOR - ROYAL ROYAL ELETTRONICO - STARK
ASTORIA CMA 28213001 ASTORIA CMA 28215001
<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFT<|
1 2 5 1 1 3 7|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R Hexternal ø 64 mm - internal ø 38 mm external ø 54 mm - internal ø 32 mm
thickness 9 mm - 3 fixing holes thickness 8.5 mm - 3 mounting holes for Grinder-dispenser (BRASILIA) CC45 - RR45 for Grinder-dispenser (COMPAK) K3 RR55 - RR65 - R80 for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
ASTORIA CMA 28216 ASTORIA CMA 28217013
<|
1 2 5 1 1 3 8|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R H<|
1 2 5 1 5 0 3|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R Hexternal ø 58 mm - internal ø 33 mm ø internal 43 mm - ø external 75 mm
thickness 8.5 mm - 3 mounting holes thickness 10.5 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K3 for Grinder-dispenser (COMPAK) K7
ASTORIA CMA 28217014 ASTORIA CMA 28217002
<|
1 2 5 1 1 4 0|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R IG H T<|
1 2 5 1 1 2 8|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFTexternal ø 82.5 mm - internal ø 49 mm external ø 65 mm - internal ø 30 mm
thickness 9.5 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Coffee grinder (COMPAK) A8 for Grinder-dispenser (ASTORIA CMA) C for Grinder-dispenser (COMPAK) K8 for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA ETIOPIA - HAWAI - HAWAI2 - MICHIGAN MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008
ASTORIA CMA 28217011 ASTORIA CMA 28500016
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 6 3 4|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFT<|
1 2 5 1 2 2 5|>
G R IN D IN G BU RR S PA IR AS TO R IA -M A HL K ON IG L Hexternal ø 59 mm - internal ø 34 mm external ø 65 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes thickness 8.4 mm - 2 fixing holes for Coffee grinder (CUNILL) ELCAFETRANQUILO for Coffee grinder (ASTORIA CMA) K30 RUMBA for Coffee grinder (MAHLKÖNIG) K30 for Grinder-dispenser (ASTORIA CMA) C for Coffee grinder (RENEKA) MK10 for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA FULLMETAL - MARFIL - MEXICO - SPACE - TAURO UGANDA for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2 MILADY - NEWFUTURSM - RIMINI
ASTORIA CMA 28500005 ASTORIA CMA
<|
1 2 5 1 5 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K R H<|
1 2 5 1 5 0 4|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R Hexternal ø 60 mm - internal ø 36 mm external ø 63.5 mm - internal ø 38 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K5 for Grinder-dispenser (COMPAK) K5 - K6
ASTORIA CMA 28217006 ASTORIA CMA 28217000
<|
1 2 5 1 7 0 7|>
G R IN D IN G BU RR S PA IR RO SS I L H<|
1 2 5 1 0 9 3|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HTBURRS "HEAVY DUTY" - duration increased by 70% ø external 80 mm - ø internal 41 mm
compared to a standard grinding burr thickness 10 mm - 3 fixing holes they do not deform for Grinder-dispenser (COMPAK) K8 lower contamination of ground coffee external ø 63,5 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
ASTORIA CMA ASTORIA CMA 28217005
<|
1 2 5 1 9 2 9|>
S IN GL E-P H. G R IN D IN G BU R R S P A IR M A ZZER R H<| |>
external ø 64 mm - internal ø 37 mm thickness 8.4 mm - 3 fixing holes for Grinder-dispenser (MAZZER) SUPERJOLLY
ASTORIA CMA 28213
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
AZKOYENT2>
<|
1 2 5 1 1 2 9|>
G R IN D IN G BU RR S PA IR AZ KO YEN -D IT TIN G L H<| |>
external ø 64 mm - internal ø 37 mm thickness 8.6 mm - 3 mounting holes for Coffee grinder (AZKOYEN) M2 for Coffee grinder (FUTURMAT-ARIETE) Q9
AZKOYEN 09710010 AZKOYEN 09710020
<T2
BEZZERAT2>
<|
1 2 5 1 7 0 2|>
G R IN D IN G BU RR S (P A IR ) O BEL LH<|
1 2 5 1 0 6 2|>
G R IN D IN G BU RR S OBE L (P A IR) LEFTGRIND BURRS "HEAVY DUTY" +70% longer life cycle external ø 50 mm - internal ø 30 mm
compared to a standard grinding burr thickness 8 mm - 3 fixing holes they do not deform for Grinder-dispenser (BEZZERA) BB004 - BB95 less contamination of milled coffee for Grinder-dispenser (CARIMALI) MJUNIOR ø external 63.5 mm - ø internal 37.5 mm for Grinder-dispenser (FIAMMA RST) MCF2 thickness 9 mm - 3 fixing holes for Grinder-dispenser (OBEL) JUNIOR for Grinder-dispenser (SPAZIALE) JUNIOR
BEZZERA BEZZERA 0BDF8
<|
1 2 5 1 0 6 1|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) LEFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB003 - BB105 BB90 for Grinder-dispenser (CARIMALI) M1 - M3 for Grinder-dispenser (OBEL) DSQ - EB - MITO for Grinder-dispenser (PAVONI) ZIP for Grinder-dispenser (RENEKA) B14
BEZZERA 0BEB08
<T2
BIANCHIT2>
<|
1 2 5 1 1 6 4|>
G R IN D IN G BU RR S PA IR BIA N C H I R H<|
1 2 5 1 1 6 5|>
G R IN D IN G BU RR S PA IR BIA N C H I R Hexternal ø 64 mm - internal ø 37 mm external ø 64 mm - internal ø 38 mm
thickness 8.5 mm - 3 mounting holes thickness 8.5 mm - 3 mounting holes
BIANCHI 18007316 BIANCHI 18007316-01 BIANCHI 18007326
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 1 6 6|>
G R IN D IN G BU RR S PA IR BIA N C H I R H<|
1 2 5 1 1 6 7|>
G R IN D IN G BU RR S PA IR BIA N C H I R Hexternal ø 54 mm - internal ø 31 mm external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 mounting holes thickness 8 mm - 3 mounting holes
BIANCHI 18006616 BIANCHI 18006116
<T2
BRASILIAT2>
<|
1 2 5 1 0 5 0|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<| |>
external ø 38/30 mm - internal ø 26/7 mm thickness 17/20,3 mm for Coffee grinder (ISOMAC) GRANMACININO PROFESSIONALE - ROBY for Grinder-dispenser (BRASILIA) FM for Grinder-dispenser (IBERITAL) MINIMOLINO for Grinder-dispenser (ROSSI) FM
BRASILIA 13659.3.00.04
<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<|
1 2 5 1 0 1 6|>
G R IN D IN G BU RR S (P A IR ) R O SS I L EFTexternal ø 68/49 mm - internal ø 41/13 mm external ø 50 mm - internal ø 31 mm
thickness 25 mm - 4 mounting holes thickness 8.5 mm - 3 mounting holes inner groove for feather key for Grinder-dispenser (BRASILIA) BFD for Grinder-dispenser (BRASILIA) MC for Grinder-dispenser (ROSSI) BFD for Grinder-dispenser (CASADIO) GC98 for Grinder-dispenser (MACAP) M7K - M7KA - M7KT for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
BRASILIA 03603.3.00.04 BRASILIA 00059.3.00.04
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFT<|
1 2 5 1 0 1 7|>
G R IN D IN G BU RR S BR A SILIA (P AIR ) L EFTexternal ø 64 mm - internal ø 38 mm external ø 63 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (BRASILIA) CC45 - RR45 for Grinder-dispenser (BRASILIA) VIP RR55 - RR65 - R80 for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
BRASILIA 00058.2.00.04 BRASILIA 00058.3.00.04 BRASILIA 05617.3.00.04
<|
1 2 5 1 0 9 4|>
G R IN D IN G BU RR S PA IR RO SS I L H<|
1 2 5 1 7 0 7|>
G R IN D IN G BU RR S PA IR RO SS I L Hexternal ø 63.5 mm - internal ø 38 mm BURRS "HEAVY DUTY" - duration increased by 70%
thickness 9 mm - 3 mounting holes compared to a standard grinding burr for Grinder-dispenser (BRASILIA) MAC64 they do not deform for Grinder-dispenser (ROSSI) MAC64 - RR55OD lower contamination of ground coffee external ø 63,5 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
BRASILIA 19164.3.00.04 BRASILIA
<T2
CARIMALIT2>
<|
1 2 5 1 7 0 2|>
G R IN D IN G BU RR S (P A IR ) O BEL LH<| |>
GRIND BURRS "HEAVY DUTY" +70% longer life cycle compared to a standard grinding burr they do not deform less contamination of milled coffee ø external 63.5 mm - ø internal 37.5 mm thickness 9 mm - 3 fixing holes
CARIMALI
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
CARIMALIT2>
<|
1 2 5 1 0 6 2|>
G R IN D IN G BU RR S OBE L (P A IR) LEFT<|
1 2 5 1 1 1 4|>
G R IN D IN G BU RR S OBE L (P A IR) LEFTexternal ø 50 mm - internal ø 30 mm external ø 75 mm - internal ø 43.6 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB004 - BB95 for Grinder-dispenser (CARIMALI) GT - G1 for Grinder-dispenser (CARIMALI) MJUNIOR for Grinder-dispenser (OBEL) GLOBO "G" for Grinder-dispenser (FIAMMA RST) MCF2 for Grinder-dispenser (OBEL) JUNIOR for Grinder-dispenser (SPAZIALE) JUNIOR
CARIMALI 95.01485 CARIMALI 95.01324
<|
1 2 5 1 0 6 1|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) LEFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB003 - BB105 BB90 for Grinder-dispenser (CARIMALI) M1 - M3 for Grinder-dispenser (OBEL) DSQ - EB - MITO for Grinder-dispenser (PAVONI) ZIP for Grinder-dispenser (RENEKA) B14
CARIMALI 95.00404
<T2
CASADIOT2>
<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<|
1 2 5 1 1 9 1|>
G R IN D IN G BU RR S (P A IR ) C A S A D IO R Hexternal ø 68/49 mm - internal ø 41/13 mm external ø 63 mm - internal ø 38 mm
thickness 25 mm - 4 mounting holes thickness 9 mm - 3 mounting holes inner groove for feather key for Coffee grinder (CASADIO) ENEAONDEMAND for Grinder-dispenser (BRASILIA) MC for Grinder-dispenser (CASADIO) ENEA for Grinder-dispenser (CASADIO) GC98 for Grinder-dispenser (MACAP) M7K - M7KA - M7KT for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
CASADIO 41008320002 CASADIO 537060000
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 2 1|>
G R IN D IN G BU RR S C A SA D IO (PA IR ) LE FT<|
1 2 5 1 0 2 3|>
G R IN D IN G BU RR S C A SA D IO (PA IR ) LE FTexternal ø 53 mm - internal ø 30 mm external ø 64 mm - internal ø 34.5 mm
thickness 8.5 mm - 3 fixing holes thickness 10 mm - 2 fixing holes for Grinder-dispenser (CASADIO) EXPORT for Grinder-dispenser (CASADIO) MOKABIX
CASADIO 41005870002 CASADIO 41000390102
<|
1 2 5 1 0 2 2|>
G R IN D IN G BU RR S C A SA D IO (PA IR ) R IG H T<|
1 2 5 1 0 2 5|>
G R IN D IN G BU RR S C A SA D IO-ISA (P A IR ) L EFTexternal ø 64 mm - internal ø 34.5 mm external ø 84 mm - internal ø 45 mm
thickness 10 mm - 2 fixing holes thickness 10.3 mm - 3 fixing holes for Grinder-dispenser (CASADIO) MOKABIX for Grinder-dispenser (CASADIO) G84 - MOKABIX
CASADIO CASADIO 41000760102
<|
1 2 5 1 1 8 7|>
G R IN D IN G BU RR S C A SA D IO/C IM BA L I/F AE M A R H<|
1 2 5 1 1 8 9|>
G R IN D IN G BU RR S PA IR C A SA D IO C O N IC A R Hexternal ø 63.5 mm - internal ø 38 mm external ø 68/49 mm - internal ø 42/11 mm
thickness 9 mm - 3 fastening holes thickness 25 mm - 4 fastening holes for Grinder-dispenser (CASADIO) THEO64 inner groove for feather for Grinder-dispenser (CIMBALI) 7S for Grinder-dispenser (CASADIO) THEOCONIC for Grinder-dispenser (FAEMA) MD7S - ME64
CASADIO 537048800 CASADIO 965157000
<|
1 2 5 1 1 1 0|>
G R IN D IN G BU RR S PA IR C A SA D IO C O N IC A L R H<|
1 2 5 1 1 8 8|>
G R IN D IN G BU RR S PA IR C A SA D IO R Hexternal ø 47/32 mm - internal ø 28/10 mm external ø 84 mm - internal ø 46 mm
thickness 20 mm thickness 9.3 mm - 3 fastening holes complete with star gasket for Grinder-dispenser (CASADIO) THEO84 for Coffee grinder (CASADIO) ISTANTANEO ISTANTANEONEW
CASADIO 40090890000 CASADIO 41009030002 CASADIO 50160100100 CASADIO 537048900
CASADIO 537046700
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
CIMBALIT2>
<|
1 2 5 1 1 3 5|>
G R .BU RR S C IM BA L I-FA EM A TITA N IU M (P A IR ) L H<| |>
external ø 63.5 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes
CIMBALI 427-867-000 CIMBALI 463-727-000
<|
1 2 5 1 7 0 6|>
G R IN D .BU R RS P A IR C IM BA L I-FA EM A C O NIC . R H<|
1 2 5 1 7 0 3|>
G R IN D IN G BU RR S (P A IR ) C IM BA LI/FA EM A R HGRIND BURRS "HEAVY DUTY" +70% longer life cycle GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr compared to a standard grinding burr they do not deform they do not deform less contamination of ground coffee less contamination of milled coffee external ø 68/49 mm - internal ø 40/11 mm ø external 75 mm - ø internal 43.5 mm thickness 25 mm - 4 fixing holes thickness 9 mm - 3 fixing holes
CIMBALI CIMBALI
<|
1 2 5 1 1 8 7|>
G R IN D IN G BU RR S C A SA D IO/C IM BA L I/F AE M A R H<|
1 2 5 1 0 3 1|>
G R IN D IN G BU RR S C IM BA L I (PA IR ) R IG H Texternal ø 63.5 mm - internal ø 38 mm external ø 54 mm - internal ø 32 mm
thickness 9 mm - 3 fastening holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (CASADIO) THEO64 for Grinder-dispenser (CIMBALI) 7S for Grinder-dispenser (FAEMA) MD7S - ME64
CIMBALI 537-048-800 CIMBALI
<|
1 2 5 1 0 3 2|>
G R IN D IN G BU RR S C IM BA L I (PA IR ) R IG H T<|
1 2 5 1 0 4 2|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L Hexternal ø 64 mm - internal ø 37 mm external ø 54 mm - internal ø 31 mm
thickness 9 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Grinder-dispenser (CIMBALI) ALINOX - MD JUNIOR for Grinder-dispenser (FAEMA) MPN for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
CIMBALI 535-100-200 CIMBALI
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 4 3|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L H<|
1 2 5 1 0 1 5|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R Hexternal ø 62 mm - internal ø 38 mm external ø 75 mm - internal ø 44 mm
thickness 9 mm - 3 fixing holes thickness 9.4 mm - 3 fixing holes for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP for Grinder-dispenser (CIMBALI) MAGNUM for Grinder-dispenser (FAEMA) MD3000
CIMBALI CIMBALI 800-133-539 CIMBALI 990-709-000
<|
1 2 5 1 0 4 1|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R H<|
1 2 5 1 0 4 4|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R Hexternal ø 54 mm - internal ø 31 mm external ø 64 mm - internal ø 38 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (FAEMA) MPN for Grinder-dispenser (FAEMA) MD SILVER
CIMBALI 4801-116-730 CIMBALI 4801-119-956
<|
1 2 5 1 0 4 6|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R IGH T<|
1 2 5 1 1 7 0|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R IGH Texternal ø 75 mm - internal ø 43.5 mm ø external 63,5 mm - ø internal 38 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (CIMBALI) MAGNUM for Coffee grinder (CIMBALI) MAGNUMONDEMAND for Grinder-dispenser (FAEMA) MD2000
CIMBALI 4801-133-539 CIMBALI 537-041-300 CIMBALI 916-116-000
<|
1 2 5 1 0 3 6|>
G R IN D IN G BU RR S D R M -A L IN O X (P A IR) RIG HT<|
1 2 5 1 0 4 5|>
G R IN D IN G BU RR S FA EM A C ON IC A L (P A IR) RHexternal ø 68 mm - internal ø 43 mm external ø 68/49 mm - internal ø 41/11 mm
thickness 8 mm - 3 fixing holes thickness 25 mm - 4 fixing holes for Grinder-dispenser (CIMBALI) ALINOX A for Grinder-dispenser (CIMBALI) CONIK for Grinder-dispenser (FAEMA) MC90 - MC99
CIMBALI 803-130-050 CIMBALI 2801-131-470
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 4 7|>
G R IN D IN G BU RR S PA IR C IM BA L I R H<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (CIMBALI) MD MAX
CIMBALI 803-130-055
<T2
COMPAKT2>
<|
1 2 5 1 1 4 2|>
C O N IC A L GR IND IN G B UR R S C OM P A K (PA IR) RH<|
1 2 5 1 1 3 7|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R Hexternal ø 68/49 mm - internal ø 41/13 mm external ø 54 mm - internal ø 32 mm
thickness 25 mm - 4 mounting holes thickness 8.5 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K10 for Grinder-dispenser (COMPAK) K3
COMPAK K.3068 COMPAK K.2054
<|
1 2 5 1 1 3 8|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R H<|
1 2 5 1 5 0 3|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R Hexternal ø 58 mm - internal ø 33 mm ø internal 43 mm - ø external 75 mm
thickness 8.5 mm - 3 mounting holes thickness 10.5 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K3 for Grinder-dispenser (COMPAK) K7
COMPAK K.2058 COMPAK K...98
<|
1 2 5 1 1 4 0|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R IG H T<|
1 2 5 1 5 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K R Hexternal ø 82.5 mm - internal ø 49 mm external ø 60 mm - internal ø 36 mm
thickness 9.5 mm - 3 mounting holes thickness 8 mm - 3 fixing holes for Coffee grinder (COMPAK) A8 for Grinder-dispenser (COMPAK) K5 for Grinder-dispenser (COMPAK) K8
COMPAK K..812 COMPAK
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 5 0 4|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R H<|
1 2 5 1 7 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R Hexternal ø 63.5 mm - internal ø 38 mm GRIND BURRS "HEAVY DUTY" +70% longer life cycle
thickness 9 mm - 3 mounting holes compared to a standard grinding burr for Grinder-dispenser (COMPAK) K5 - K6 they do not deform less contamination of ground coffee external ø 63 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
COMPAK K...99 COMPAK
<|
1 2 5 1 0 9 2|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HT<|
1 2 5 1 0 9 3|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HTø external 63 mm - ø internal 38 mm ø external 80 mm - ø internal 41 mm
thickness 9 mm - 3 fixing holes thickness 10 mm - 3 fixing holes for Grinder-dispenser (COMPAK) K8
COMPAK COMPAK K..247
<T2
CUNILLT2>
<|
5 0 7 2 4 5 5|>
BU R R P A IR C U N IL L LH<| |>
ø external 59 mm - ø internal 34 mm thickness 9 mm - 3 fastening holes ORIGINAL
CUNILL MC0059/060
<|
1 2 5 1 1 2 8|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFT<|
1 2 5 1 6 3 4|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFTexternal ø 65 mm - internal ø 30 mm external ø 59 mm - internal ø 34 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (ASTORIA CMA) C for Coffee grinder (CUNILL) ELCAFETRANQUILO for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA RUMBA ETIOPIA - HAWAI - HAWAI2 - MICHIGAN for Grinder-dispenser (ASTORIA CMA) C MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008 for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA FULLMETAL - MARFIL - MEXICO - SPACE - TAURO UGANDA for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2 MILADY - NEWFUTURSM - RIMINI
CUNILL 058/061MOL CUNILL 058MOL CUNILL 061MOL CUNILL MC59/060 CUNILL 059/060MOL CUNILL 059MOL
CUNILL MC058/061 CUNILL 060MOL CUNILL MC0059/060
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
DITTINGT2>
<|
1 2 5 1 1 2 5|>
G R IN D .BU R RS A ST OR IA -M A H LK O NIG (P A IR ) L EFT<| |>
external ø 65 mm - internal ø 38 mm thickness 8.4 mm - 2 mounting holes for Coffee grinder (ASTORIA CMA) K30 for Grinder-dispenser (MAHLKÖNIG) K30 for Grinder-dispenser (RENEKA) MK10
DITTING
<|
1 2 5 1 2 2 5|>
G R IN D IN G BU RR S PA IR AS TO R IA -M A HL K ON IG L H<| |>
external ø 65 mm - internal ø 38 mm thickness 8.4 mm - 2 fixing holes for Coffee grinder (ASTORIA CMA) K30 for Coffee grinder (MAHLKÖNIG) K30 for Coffee grinder (RENEKA) MK10
DITTING
<T2
DRMT2>
<|
1 2 5 1 0 3 2|>
G R IN D IN G BU RR S C IM BA L I (PA IR ) R IG H T<|
1 2 5 1 0 3 6|>
G R IN D IN G BU RR S D R M -A L IN O X (P A IR) RIG HTexternal ø 64 mm - internal ø 37 mm external ø 68 mm - internal ø 43 mm
thickness 9 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Grinder-dispenser (CIMBALI) ALINOX - MD JUNIOR for Grinder-dispenser (CIMBALI) ALINOX A
DRM MA640009/0014 DRM
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
ELEKTRAT2>
<|
1 2 5 1 3 0 4|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<| |>
external ø 65 mm - internal ø 38 mm thickness 8.5 mm - 3 fixing holes for Coffee grinder (MACAP) MC6 - MC6T for Grinder-dispenser (ELEKTRA) MX - MXA for Grinder-dispenser (GAGGIA) MD64NEW for Grinder-dispenser (MACAP) MX - MXA - MXT for Grinder-dispenser (SPAZIALE) ASTRO12 ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
ELEKTRA C0004M122
<|
1 2 5 1 3 1 0|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<| |>
external ø 74 mm - internal ø 42 mm thickness 9 mm - 3 fixing holes for Coffee grinder (ELEKTRA) MC7 - MC7T for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7 M7A - M7T for Grinder-dispenser (GAGGIA) MD75
ELEKTRA C0004M121
<T2
EROST2>
<|
1 2 5 1 0 3 7|>
G R IN D IN G BU RR S ER OS C ON IC A L (PA IR ) R IG HT<| |>
external ø 49/68 mm - internal ø 13/45 mm thickness 25 mm
EROS
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
ESPRESSO RESOURCET2>
<|
1 2 5 1 0 5 0|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<|
1 2 5 1 0 1 6|>
G R IN D IN G BU RR S (P A IR ) R O SS I L EFTexternal ø 38/30 mm - internal ø 26/7 mm external ø 50 mm - internal ø 31 mm
thickness 17/20,3 mm thickness 8.5 mm - 3 mounting holes for Coffee grinder (ISOMAC) GRANMACININO for Grinder-dispenser (BRASILIA) BFD PROFESSIONALE - ROBY for Grinder-dispenser (ROSSI) BFD for Grinder-dispenser (BRASILIA) FM for Grinder-dispenser (IBERITAL) MINIMOLINO for Grinder-dispenser (ROSSI) FM
ESPRESSO RESOURCE 709 ESPRESSO RESOURCE 8180
<|
1 2 5 1 0 0 2|>
G R IN D IN G BU RR S A NFIM (P A IR ) L EFT<|
1 2 5 1 0 0 3|>
G R IN D IN G BU RR S A NFIN (P A IR ) L Hexternal ø 64 mm - internal ø 37 mm external ø 75 mm - internal ø 43 mm
thickness 9 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Coffee grinder (ANFIM) CAIMANO ON DEMAND for Grinder-dispenser (ANFIM) for Grinder-dispenser (ANFIM) CAIMANO - LUSSO CAIMANO SPECIAL450 AUTOMATICO for Grinder-dispenser (SPAZIALE) LUX800 CAIMANO SPECIAL450 TIMER SPECIAL450 AUTOMATICO - SPECIAL450 TIMER SUPER CAIMANO - SUPERLUSSO for Grinder-dispenser (SPAZIALE) S/LUX450
ESPRESSO RESOURCE 6092 ESPRESSO RESOURCE 6869
<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFT<|
1 2 5 1 1 2 8|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFTexternal ø 64 mm - internal ø 38 mm external ø 65 mm - internal ø 30 mm
thickness 9 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (BRASILIA) CC45 - RR45 for Grinder-dispenser (ASTORIA CMA) C RR55 - RR65 - R80 for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 ETIOPIA - HAWAI - HAWAI2 - MICHIGAN for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008 for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
ESPRESSO RESOURCE 4865 ESPRESSO RESOURCE 6048
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 6 3 4|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFT<|
1 2 5 1 0 8 4|>
G R IN D IN G BU RR S FIO R ENZ A TO C S (PA IR ) R Hexternal ø 59 mm - internal ø 34 mm external ø 83 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes thickness 10 mm - 3 mounting holes for Coffee grinder (CUNILL) ELCAFETRANQUILO for Grinder-dispenser (FIORENZATO C.S.) DOGE83 RUMBA for Grinder-dispenser (VIBIEMME) VB83 for Grinder-dispenser (ASTORIA CMA) C for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA FULLMETAL - MARFIL - MEXICO - SPACE - TAURO UGANDA for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2 MILADY - NEWFUTURSM - RIMINI
ESPRESSO RESOURCE 5800 ESPRESSO RESOURCE 897 ESPRESSO RESOURCE 12287
<|
1 2 5 1 3 0 2|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 3 0 4|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HTexternal ø 68 mm - internal ø 38 mm external ø 65 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes thickness 8.5 mm - 3 fixing holes for Grinder-dispenser (SPAZIALE) M900 - M900A for Coffee grinder (MACAP) MC6 - MC6T M900T for Grinder-dispenser (ELEKTRA) MX - MXA for Grinder-dispenser (GAGGIA) MD64NEW for Grinder-dispenser (MACAP) MX - MXA - MXT for Grinder-dispenser (SPAZIALE) ASTRO12 ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
ESPRESSO RESOURCE 12299 ESPRESSO RESOURCE 12297
<|
1 2 5 1 3 1 0|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 5 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K R Hexternal ø 74 mm - internal ø 42 mm external ø 60 mm - internal ø 36 mm
thickness 9 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Coffee grinder (ELEKTRA) MC7 - MC7T for Grinder-dispenser (COMPAK) K5 for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7 M7A - M7T for Grinder-dispenser (GAGGIA) MD75
ESPRESSO RESOURCE 12298 ESPRESSO RESOURCE 2643
<|
1 2 5 1 5 0 4|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R H<|
1 2 5 1 0 8 7|>
G R IN D IN G BU RR S SA N M AR C O (P A IR ) R Hexternal ø 63.5 mm - internal ø 38 mm external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K5 - K6 for Grinder-dispenser (SAN MARCO) SM95 - SM95A SM96 - SM97
ESPRESSO RESOURCE 9081 ESPRESSO RESOURCE 8185
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 9 3|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HT<| |>
ø external 80 mm - ø internal 41 mm thickness 10 mm - 3 fixing holes for Grinder-dispenser (COMPAK) K8
ESPRESSO RESOURCE 10194
<T2
EUREKAT2>
<|
1 2 5 1 0 3 8|>
C O N IC A L GR IND IN G B UR R S EU R EK A (P A IR ) R H<|
1 2 5 1 0 7 0|>
G R IN D IN G BU RR S EU REK A (P A IR ) R Hexternal ø 68/49 mm - internal ø 45/13 mm external ø 70 mm - internal ø 38 mm
thickness 25 mm - 4 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (EUREKA) LUSSO MDLCA/C for Grinder-dispenser (EUREKA) MONDIALMDM for Grinder-dispenser (NUOVA SIMONELLI) MDLCA/C
EUREKA E-13/68 EUREKA E-13/68CP EUREKA MAC70CP
<|
1 2 5 1 0 7 3|>
G R IN D IN G BU RR S EU REK A (P A IR ) R H<|
1 2 5 1 0 6 0|>
G R IN D IN G BU RR S EU REK A (P A IR ) R IGH Texternal ø 85 mm - internal ø 37 mm external ø 74 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (EUREKA) MCD for Grinder-dispenser (EUREKA) LUSSO MDLCA75 LUSSO MDML for Grinder-dispenser (NUOVA SIMONELLI) MDL MDLCA
EUREKA MAC85 EUREKA MAC85CP EUREKA MAC74 EUREKA MAC74CP EUREKA MAC75
<|
1 2 5 1 0 6 8|>
G R IN D IN G BU RR S EU REK A (P A IR ) R IGH T<|
1 2 5 1 0 7 4|>
G R IN D IN G BU RR S EU REK A (P A IR ) R IGH Texternal ø 60 mm - internal ø 38 mm external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (EUREKA) MDMEA for Grinder-dispenser (EUREKA) MDLCA - MDMCA for Grinder-dispenser (NUOVA SIMONELLI) MDX - MDXA
EUREKA MAC60 EUREKA MAC60CP EUREKA MAC64 EUREKA MAC64CP EUREKA MAC64TR
EUREKA MAC65
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 6 9|>
G R IN D IN G BU RR S EU REK A P A IR RH<| |>
ø external 50 mm - ø internal 30 mm thickness 7.5 mm - 3 mounting holes for Grinder-dispenser (EUREKA) MCF for Grinder-dispenser (NUOVA SIMONELLI) MCF
EUREKA MAC50 EUREKA MAC50CP
<T2
FAEMAT2>
<|
1 2 5 1 1 3 5|>
G R .BU RR S C IM BA L I-FA EM A TITA N IU M (P A IR ) L H<|
1 2 5 1 7 0 6|>
G R IN D .BU R RS P A IR C IM BA L I-FA EM A C O NIC . R Hexternal ø 63.5 mm - internal ø 38 mm GRIND BURRS "HEAVY DUTY" +70% longer life cycle
thickness 9 mm - 3 mounting holes compared to a standard grinding burr they do not deform less contamination of ground coffee external ø 68/49 mm - internal ø 40/11 mm thickness 25 mm - 4 fixing holes
FAEMA 427867000 FAEMA 463727000 FAEMA
<|
1 2 5 1 7 0 3|>
G R IN D IN G BU RR S (P A IR ) C IM BA LI/FA EM A R H<|
1 2 5 1 1 8 7|>
G R IN D IN G BU RR S C A SA D IO/C IM BA L I/F AE M A R HGRIND BURRS "HEAVY DUTY" +70% longer life cycle external ø 63.5 mm - internal ø 38 mm
compared to a standard grinding burr thickness 9 mm - 3 fastening holes they do not deform for Grinder-dispenser (CASADIO) THEO64 less contamination of milled coffee for Grinder-dispenser (CIMBALI) 7S ø external 75 mm - ø internal 43.5 mm for Grinder-dispenser (FAEMA) MD7S - ME64 thickness 9 mm - 3 fixing holes
FAEMA FAEMA 537048800
<|
1 2 5 1 0 4 2|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L H<|
1 2 5 1 0 4 3|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L Hexternal ø 54 mm - internal ø 31 mm external ø 62 mm - internal ø 38 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (FAEMA) MPN for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FAEMA FAEMA
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 1 5|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R H<|
1 2 5 1 0 4 1|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R Hexternal ø 75 mm - internal ø 44 mm external ø 54 mm - internal ø 31 mm
thickness 9.4 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Grinder-dispenser (CIMBALI) MAGNUM for Grinder-dispenser (FAEMA) MPN for Grinder-dispenser (FAEMA) MD3000
FAEMA 990709000 FAEMA 4801116730
<|
1 2 5 1 0 4 4|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R H<|
1 2 5 1 0 4 6|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R IGH Texternal ø 64 mm - internal ø 38 mm external ø 75 mm - internal ø 43.5 mm
thickness 9 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (FAEMA) MD SILVER for Grinder-dispenser (CIMBALI) MAGNUM for Grinder-dispenser (FAEMA) MD2000
FAEMA 4801119956 FAEMA 4801133539
<|
1 2 5 1 1 7 0|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR ) R IGH T<|
1 2 5 1 0 4 5|>
G R IN D IN G BU RR S FA EM A C ON IC A L (P A IR) RHø external 63,5 mm - ø internal 38 mm external ø 68/49 mm - internal ø 41/11 mm
thickness 9 mm - 3 fixing holes thickness 25 mm - 4 fixing holes for Coffee grinder (CIMBALI) MAGNUMONDEMAND for Grinder-dispenser (CIMBALI) CONIK for Grinder-dispenser (FAEMA) MC90 - MC99
FAEMA 537041300 FAEMA 2801131470
<T2
FIAMMA RSTT2>
<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes for Grinder-dispenser (BRASILIA) CC45 - RR45 RR55 - RR65 - R80 for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
FIAMMA RST 5.0.052.4435
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
FIAMMA RSTT2>
<|
1 2 5 1 0 6 2|>
G R IN D IN G BU RR S OBE L (P A IR) LEFT<|
1 2 5 1 7 0 7|>
G R IN D IN G BU RR S PA IR RO SS I L Hexternal ø 50 mm - internal ø 30 mm BURRS "HEAVY DUTY" - duration increased by 70%
thickness 8 mm - 3 fixing holes compared to a standard grinding burr for Grinder-dispenser (BEZZERA) BB004 - BB95 they do not deform for Grinder-dispenser (CARIMALI) MJUNIOR lower contamination of ground coffee for Grinder-dispenser (FIAMMA RST) MCF2 external ø 63,5 mm - internal ø 38 mm for Grinder-dispenser (OBEL) JUNIOR thickness 9 mm - 3 fixing holes for Grinder-dispenser (SPAZIALE) JUNIOR
FIAMMA RST 5.0.051.008F FIAMMA RST
<T2
FIORENZATO C.S.T2>
<|
1 2 5 1 0 8 8|>
G R .BU RR S F IO RE NZ AT O C S (P A IR) C ON IC A L R H<| |>
external ø 71/49 mm - internal ø 41/13 mm thickness 25 mm - 3 mounting holes for Grinder-dispenser (FIORENZATO C.S.) DOGECONICO
FIORENZATO C.S. A3200018
<|
1 2 5 1 0 8 4|>
G R IN D IN G BU RR S FIO R ENZ A TO C S (PA IR ) R H<|
1 2 5 1 0 7 8|>
G R IN D IN G BU RR S FIO R ENZ A TO C S R IGH Texternal ø 83 mm - internal ø 45 mm external ø 63 mm - internal ø 38 mm
thickness 10 mm - 3 mounting holes thickness 9.5 mm - 3 mounting holes for Grinder-dispenser (FIORENZATO C.S.) DOGE83 for Grinder-dispenser (FIORENZATO C.S.) DOGE63 for Grinder-dispenser (VIBIEMME) VB83 for Grinder-dispenser (QUAMAR) M1 - M80 - T80 T80D for Grinder-dispenser (VIBIEMME) VB63
FIORENZATO C.S. A3200083 FIORENZATO C.S. A3200063
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
FIORENZATO M.C.T2>
<|
1 2 5 1 0 3 0|>
G R IN D IN G BU RR S FIO R ENZ A TO M C (P A IR ) R H<| |>
external ø 64 mm - internal ø 37 mm thickness 8.5 mm - 3 mounting holes for Grinder-dispenser (FIORENZATO M.C.) F5
FIORENZATO M.C. 001.002.034 FIORENZATO M.C. 400000005
<|
1 2 5 1 0 3 3|>
G R IN D IN G BU RR S FIO R ENZ A TO M C (P A IR ) R H<| |>
external ø 82.5 mm - internal ø 49 mm thickness 9.5 mm - 3 mounting holes for Grinder-dispenser (FIORENZATO M.C.) F6
FIORENZATO M.C. 001.002.030 FIORENZATO M.C. 400000004
<T2
FUTURMAT-ARIETET2>
<|
1 2 5 1 0 4 2|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L H<|
1 2 5 1 0 4 3|>
G R IN D IN G BU RR S C IM BA L I-FA EM A (P A IR )L Hexternal ø 54 mm - internal ø 31 mm external ø 62 mm - internal ø 38 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (FAEMA) MPN for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FUTURMAT-ARIETE 00896209 FUTURMAT-ARIETE 00888008
<|
1 2 5 1 6 3 4|>
G R IN D IN G BU RR S C U NIL L (P A IR) LEFT<| |>
external ø 59 mm - internal ø 34 mm thickness 9 mm - 3 mounting holes for Coffee grinder (CUNILL) ELCAFETRANQUILO RUMBA for Grinder-dispenser (ASTORIA CMA) C for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA FULLMETAL - MARFIL - MEXICO - SPACE - TAURO UGANDA for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2 MILADY - NEWFUTURSM - RIMINI
FUTURMAT-ARIETE 26000059/060
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
GAGGIAT2>
<|
1 2 5 1 1 4 6|>
C ER A M IC G R IN D ING BU R R S S AE C O (PA IR ) LE FT<|
1 2 5 1 0 9 8|>
C O N IC .G R IN D .BU R R S S A EC O-G A G GIA (P A IR ) R Hexternal ø 48 mm - internal ø 28 mm external ø 47.8/31.7 mm - internal ø 28/10 mm
thickness 6.5 mm thickness 20 mm
GAGGIA 146520100 GAGGIA 226477700
<|
1 2 5 1 1 9 9|>
C O N IC A L GR IND .BU RR S PA IR S A EC O -G A G G IA R H<|
1 2 5 1 0 0 6|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R Hø external 47.8/31.7 mm - ø internal 28/10 mm external ø 58 mm - internal ø 34 mm
thickness 20 mm thickness 8 mm - 3 mounting holes
GAGGIA 226477700 GAGGIA
<|
1 2 5 1 0 0 7|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R H<|
1 2 5 1 0 1 4|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R Hexternal ø 84 mm - internal ø 45 mm external ø 74 mm - internal ø 42.5 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (ARISTARCO) EMA80 for Grinder-dispenser (ARISTARCO) EMA80 for Grinder-dispenser (GAGGIA) MD85 for Grinder-dispenser (SAECO) MS85
GAGGIA MDB0248 GAGGIA
<|
1 2 5 1 3 0 4|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 3 0 8|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HTexternal ø 65 mm - internal ø 38 mm external ø 58 mm - internal ø 34 mm
thickness 8.5 mm - 3 fixing holes thickness 8.5 mm - 3 fixing holes for Coffee grinder (MACAP) MC6 - MC6T for Coffee grinder (MACAP) MC4 - MC4T - MC5 - MC5T for Grinder-dispenser (ELEKTRA) MX - MXA for Grinder-dispenser (MACAP) MD58COMPACT - M4 for Grinder-dispenser (GAGGIA) MD64NEW M4A - M4T - M5 - M5A - M5T for Grinder-dispenser (MACAP) MX - MXA - MXT for Grinder-dispenser (SPAZIALE) ASTRO12 ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
GAGGIA 4931C0004M122 GAGGIA 4931C0004M135
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 3 1 0|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 1 7 3|>
G R IN D IN G BU RR S PA IR SA EC O /G A GG IA R Hexternal ø 74 mm - internal ø 42 mm external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes thickness 8.5 mm - 3 fixing holes for Coffee grinder (ELEKTRA) MC7 - MC7T for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7 M7A - M7T for Grinder-dispenser (GAGGIA) MD75
GAGGIA 4931C0004M121 GAGGIA 9141.072
<T2
GAGGIA SPAGNAT2>
<|
1 2 5 1 6 3 1|>
G R IN D IN G BU RR S GA G G IA S PA G N A (P A IR ) L EFT<| |>
ø external 63,5 mm - ø internal 34 mm thickness 10,5 mm - 2 fixing holes
GAGGIA SPAGNA
<|
1 2 5 1 6 3 2|>
G R IN D IN G BU RR S GA G G IA S PA G N A (P A IR ) L EFT<|
1 2 5 1 6 3 3|>
G R IN D IN G BU RR S GA G G IA S PA G N A (P A IR ) L EFTø external 59 mm - ø internal 33 mm ø external 53 mm - ø internal 30 mm
thickness 9,5 mm - 3 fixing holes thisckness 9 mm - 3 fixing holes
GAGGIA SPAGNA GAGGIA SPAGNA
<T2
ISOMACT2>
<|
1 2 5 1 0 5 0|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<| |>
external ø 38/30 mm - internal ø 26/7 mm thickness 17/20,3 mm for Coffee grinder (ISOMAC) GRANMACININO PROFESSIONALE - ROBY for Grinder-dispenser (BRASILIA) FM for Grinder-dispenser (IBERITAL) MINIMOLINO for Grinder-dispenser (ROSSI) FM
ISOMAC IS000437
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
MACAPT2>
<|
1 2 5 1 1 0 1|>
C O N IC A L GR IND IN G B UR R S M A C A P (P A IR ) R IGH T<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RHexternal ø 63/40 mm - internal ø 33/13 mm external ø 68/49 mm - internal ø 41/13 mm
thickness 23 mm - 3 mounting holes thickness 25 mm - 4 mounting holes for Grinder-dispenser (MACAP) MXK - MXKA - MXKT inner groove for feather key for Grinder-dispenser (SPAZIALE) ASTRO8/CA for Grinder-dispenser (BRASILIA) MC for Grinder-dispenser (CASADIO) GC98 for Grinder-dispenser (MACAP) M7K - M7KA - M7KT for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
MACAP C0004M122B MACAP C0004M121B
<|
1 2 5 1 0 9 7|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 3 0 2|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HTexternal ø 74 mm - internal ø 43 mm external ø 68 mm - internal ø 38 mm
height 9 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (MACAP) M7A900 - M7T900 for Grinder-dispenser (SPAZIALE) M900 - M900A M7900 M900T
MACAP C0004M121A MACAP C0004M123
<|
1 2 5 1 3 0 4|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 3 0 8|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HTexternal ø 65 mm - internal ø 38 mm external ø 58 mm - internal ø 34 mm
thickness 8.5 mm - 3 fixing holes thickness 8.5 mm - 3 fixing holes for Coffee grinder (MACAP) MC6 - MC6T for Coffee grinder (MACAP) MC4 - MC4T - MC5 - MC5T for Grinder-dispenser (ELEKTRA) MX - MXA for Grinder-dispenser (MACAP) MD58COMPACT - M4 for Grinder-dispenser (GAGGIA) MD64NEW M4A - M4T - M5 - M5A - M5T for Grinder-dispenser (MACAP) MX - MXA - MXT for Grinder-dispenser (SPAZIALE) ASTRO12 ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
MACAP C0004M122 MACAP C0004M135
<|
1 2 5 1 3 1 0|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 0 9 5|>
G R IN D IN G BU RR S PA IR M A C A P R Hexternal ø 74 mm - internal ø 42 mm external ø 58 mm - internal ø 34 mm
thickness 9 mm - 3 fixing holes height 8.5 mm - 3 mounting holes for Coffee grinder (ELEKTRA) MC7 - MC7T for Grinder-dispenser (MACAP) M4D - M5D for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7 M7A - M7T for Grinder-dispenser (GAGGIA) MD75
MACAP MACAP C0004M121 MACAP C0004M135A
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 1 0 4|>
G R IN D IN G BU RR S PA IR M A C A P R H<| |>
external ø 64.6 mm - internal ø 38 mm height 8.6 mm - 3 mounting holes for Grinder-dispenser (MACAP) MXA900 - MXT900 MX900
MACAP C0004M122A
<T2
MAHLKÖNIGT2>
<|
1 2 5 1 1 2 5|>
G R IN D .BU R RS A ST OR IA -M A H LK O NIG (P A IR ) L EFT<|
1 2 5 1 2 2 5|>
G R IN D IN G BU RR S PA IR AS TO R IA -M A HL K ON IG L Hexternal ø 65 mm - internal ø 38 mm external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes thickness 8.4 mm - 2 fixing holes for Coffee grinder (ASTORIA CMA) K30 for Coffee grinder (ASTORIA CMA) K30 for Grinder-dispenser (MAHLKÖNIG) K30 for Coffee grinder (MAHLKÖNIG) K30 for Grinder-dispenser (RENEKA) MK10 for Coffee grinder (RENEKA) MK10
MAHLKÖNIG MAHLKÖNIG
<T2
MARCFI-ANCAST2>
<|
1 2 5 1 5 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K R H<| |>
external ø 60 mm - internal ø 36 mm thickness 8 mm - 3 fixing holes for Grinder-dispenser (COMPAK) K5
MARCFI-ANCAS K-246
<|
1 2 5 1 5 0 4|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R H<|
1 2 5 1 0 9 3|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HTexternal ø 63.5 mm - internal ø 38 mm ø external 80 mm - ø internal 41 mm
thickness 9 mm - 3 mounting holes thickness 10 mm - 3 fixing holes for Grinder-dispenser (COMPAK) K5 - K6 for Grinder-dispenser (COMPAK) K8
MARCFI-ANCAS K-99 MARCFI-ANCAS K-247
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
MAZZERT2>
<|
1 2 5 1 0 2 0|>
C O N .GR .BU R R S M A ZZ ER (PA IR ) R H S IN G LE-P H .<| |>
external ø 63/40 mm - internal ø 40/12 mm thickness 23 mm - 3 mounting holes inner grooving for feather for Grinder-dispenser (MAZZER) KONY KONY ELETTRONICO
MAZZER FMA00191C-C MAZZER FMA00191C/A
<|
1 2 5 1 9 1 4|>
C O N .GR .BU R R S M A ZZ ER (PA IR ) R H S IN G LE-P H .<|
1 2 5 1 0 2 6|>
C O N .GR .BU R R S M A ZZ ER (PA IR ) R H T HR EE-P H .external ø 71/49 mm - internal ø 41/14 mm external ø 67/44.5 mm - internal ø 44.5/14 mm
thickness 25 mm - 3 fixing holes thickness 23 mm - 3 mounting holes for Grinder-dispenser (MAZZER) ROBUR inner grooving for feather key ROBUR ELETTRONICO for Grinder-dispenser (MAZZER) KONY
MAZZER FMA00186C MAZZER FMA00186C-C MAZZER FMA00192C MAZZER FMA00192C-C
<|
1 2 5 1 9 1 3|>
C O N .GR .BU R R S M A ZZ ER (PA IR ) R H T HR EE-P H .<|
1 2 5 1 1 1 6|>
G R IN D .BU R RS M A ZZER (P A IR) RH S IN GL E-P H.external ø 83/59 mm - internal ø 52/14 mm external ø 70 mm - internal ø 40 mm
thickness 25 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (MAZZER) ROBUR for Grinder-dispenser (MAZZER) M100
MAZZER FMA00187C MAZZER FMA00187C-C MAZZER FMA00175M
<|
1 2 5 1 1 1 8|>
G R IN D .BU R RS M A ZZER (P A IR) RH S IN GL E-P H.<|
1 2 5 1 9 2 7|>
G R IN D .BU R RS M A ZZER (P A IR) RH S IN GL E-P H.external ø 83 mm - internal ø 49 mm external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 mounting holes thickness 9.6 mm - 3 fixing holes for Grinder-dispenser (MAZZER) MAJOR for Grinder-dispenser (MAZZER) MAJOR MAJOR ELETTRONICO MAJOR ELETTRONICO
MAZZER FMA00151A MAZZER FMA00151D MAZZER FMA00151A
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 9 3 5|>
G R IN D .BU R RS M A ZZER (P A IR) RH S IN GL E-P H.<|
1 2 5 1 0 5 6|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.external ø 64 mm - internal ø 37 mm external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (MAZZER) SUPERJOLLY for Grinder-dispenser (MAZZER) SUPERJOLLY
MAZZER FMA00033M MAZZER FMA00033T
<|
1 2 5 1 1 1 7|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.<|
1 2 5 1 9 2 8|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.external ø 70 mm - internal ø 40 mm external ø 83 mm - internal ø 49 mm
thickness 9 mm - 3 mounting holes thickness 9.6 mm - 3 fixing holes for Grinder-dispenser (MAZZER) M100 for Grinder-dispenser (MAZZER) MAJOR - ROYAL ROYAL ELETTRONICO - STARK
MAZZER FMA00175T MAZZER FMA00151C
<|
1 2 5 1 9 3 0|>
G R IN D .BU R RS M A ZZER (P A IR) RH T HR EE-P H.<|
1 2 5 1 9 3 3|>
G R IN D .BU R RS M A ZZER (P A IR) RIG HT TH R EE-PHexternal ø 64 mm - internal ø 37 mm external ø 83 mm - internal ø 49 mm
thickness 8.4 mm - 3 fixing holes thickness 9.6 mm - 3 fixing holes for Grinder-dispenser (MAZZER) SUPERJOLLY for Grinder-dispenser (MAZZER) MAJOR - ROYAL ROYAL ELETTRONICO - STARK
MAZZER FMA00033T MAZZER FMA00151M MAZZER FMA00151B
<|
1 2 5 1 1 7 9|>
G R IN D .BU R RS (P A IR ) M A ZZ ER 1 -P H A SE C O N .R H<|
1 2 5 1 1 8 0|>
G R IN D .BU R RS (P A IR ) M A ZZ ER 3 -P H A SE C O N .R Hexternal ø 63/40 mm - internal ø 40/12 mm external ø 67/44.5 mm - internal ø 44.5/14 mm
thickness 23 mm - 3 mounting holes thickness 23 mm - 3 mounting holes inner groove for feather inner groove for feather for Grinder-dispenser (MAZZER) KONY for Grinder-dispenser (MAZZER) KONY KONY ELETTRONICO
MAZZER FMA00191C/C MAZZER FMA00192C-C
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 1 7 8|>
G R IN D .BU R RS (P A IR ) M A ZZ ER 3 -P H A SE R H<|
5 0 1 9 9 6 0|>
G R IN D .BU R RS (P A IR ) M A ZZ ER 3 -P H A SE R Hexternal ø 83 mm - internal ø 49 mm external ø 115 mm - internal ø 68 mm
thickness 9.6 mm - 3 mounting holes thickness 12 mm - 3 mounting holes for Grinder-dispenser (MAZZER) MAJOR - ROYAL for Grinder-dispenser (MAZZER) M1000 ROYAL ELETTRONICO - STARK
MAZZER FMA00151B MAZZER FMA00174T
<|
1 2 5 1 1 8 1|>
G R IN D .BU R RS (P A IR ) 1 -P H AS E M A ZZE R C O N .R H<|
1 2 5 1 2 1 5|>
G R IN D IN G BU RR S (P A IR ) M A ZZ ER R Hexternal ø 71/49 mm - internal ø 41/14 mm external ø 64 mm - internal ø 37 mm
thickness 25 mm - 3 mounting holes thickness 8.4 mm - 3 mounting holes for Grinder-dispenser (MAZZER) ROBUR for Grinder-dispenser (MAZZER) MINI ELETTRONICO A ROBUR ELETTRONICO MINI ELETTRONICO B
MAZZER FMA00186C-C MAZZER
<|
1 2 5 1 7 0 4|>
G R IN D IN G BU RR S (P A IR ) M A ZZ ER S IN G L E-P H R<|
1 2 5 1 7 0 0|>
G R IN D IN G BU RR S (P A IR ) M A ZZ ER 1 -P H AS E R HGRIND BURRS "HEAVY DUTY" +70% longer life cycle GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr compared to a standard grinding burr they do not deform they do not deform less contamination of milled coffee less contamination of milled coffee ø external 83 mm - ø internal 49 mm ø external 64 mm - ø internal 38 mm thickness 9.5 mm - 3 fixing holes thickness 8.5 mm - 3 fixing holes
MAZZER MAZZER
<|
1 2 5 1 1 1 5|>
G R IN D IN G BU RR S M AZ ZER (P A IR ) R H<|
1 2 5 1 2 1 5|>
G R IN D IN G BU RR S (P A IR ) M A ZZ ER R Hexternal ø 64 mm - internal ø 37 mm external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes thickness 8.4 mm - 3 mounting holes for Grinder-dispenser (MAZZER) MINIELETTRONICO A for Grinder-dispenser (MAZZER) MINI ELETTRONICO A MINIELETTRONICO B MINI ELETTRONICO B
MAZZER FMA00189D MAZZER
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 9 1 5|>
G R IN D IN G BU RR S M AZ ZER (P A IR ) R H<|
5 0 1 9 9 5 9|>
P A IR OF B UR R S M A ZZ ER SING L E-PH A SE R Hexternal ø 58 mm - internal ø 33.5 mm external ø 115 mm - internal ø 68 mm
thickness 8.5 mm - 3 fixing holes 12 mm thickness - 3 fastening holes for Grinder-dispenser (MAZZER) MINI for Grinder-dispenser (MAZZER) M1000
MAZZER FMA00182D MAZZER FMA00174M
<|
1 2 5 1 9 2 9|>
S IN GL E-P H. G R IN D IN G BU R R S P A IR M A ZZER R H<|
1 2 5 1 2 0 1|>
S IN GL E-P H.C ON IC .GR IN.BUR R P A IR M A ZZER R Hexternal ø 64 mm - internal ø 37 mm GRIND.BURRS "HEAVY DUTY"-lifespan increased by 70%
thickness 8.4 mm - 3 fixing holes compared to a standard grinding burr for Grinder-dispenser (MAZZER) SUPERJOLLY they do not deform less contamination of ground coffee external ø 71/49 mm - internal ø 41/14 mm thickness 25 mm - 3 fixing holes
MAZZER FMA00033M MAZZER
<|
1 2 5 1 7 0 5|>
3 -PH A S E C ON IC .G RIN D .BU R RS PA IR M A Z ZER R H<| |>
GRIND.BURRS "HEAVY DUTY" +70% longer service life compared to a standard grinding burr they do not deform lower contamination of ground coffee external ø 83/59 mm - internal ø 50/14 mm thickness 25 mm - 3 fixing holes
MAZZER FMA00187C-C
<T2
NUOVA SIMONELLIT2>
<|
1 2 5 1 0 3 8|>
C O N IC A L GR IND IN G B UR R S EU R EK A (P A IR ) R H<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RHexternal ø 68/49 mm - internal ø 45/13 mm external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 fixing holes thickness 25 mm - 4 mounting holes for Grinder-dispenser (EUREKA) LUSSO MDLCA/C inner groove for feather key for Grinder-dispenser (NUOVA SIMONELLI) MDLCA/C for Grinder-dispenser (BRASILIA) MC for Grinder-dispenser (CASADIO) GC98 for Grinder-dispenser (MACAP) M7K - M7KA - M7KT for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
NUOVA SIMONELLI 15070001 NUOVA SIMONELLI 15020001
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFT<|
1 2 5 1 0 6 0|>
G R IN D IN G BU RR S EU REK A (P A IR ) R IGH Texternal ø 64 mm - internal ø 38 mm external ø 74 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (BRASILIA) CC45 - RR45 for Grinder-dispenser (EUREKA) LUSSO MDLCA75 RR55 - RR65 - R80 LUSSO MDML for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 for Grinder-dispenser (NUOVA SIMONELLI) MDL for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA MDLCA for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
NUOVA SIMONELLI 15010030 NUOVA SIMONELLI 15080002
<|
1 2 5 1 0 7 4|>
G R IN D IN G BU RR S EU REK A (P A IR ) R IGH T<|
1 2 5 1 0 6 9|>
G R IN D IN G BU RR S EU REK A P A IR RHexternal ø 64 mm - internal ø 38 mm ø external 50 mm - ø internal 30 mm
thickness 9 mm - 3 mounting holes thickness 7.5 mm - 3 mounting holes for Grinder-dispenser (EUREKA) MDLCA - MDMCA for Grinder-dispenser (EUREKA) MCF for Grinder-dispenser (NUOVA SIMONELLI) MDX - MDXA for Grinder-dispenser (NUOVA SIMONELLI) MCF
NUOVA SIMONELLI 15050001 NUOVA SIMONELLI 15800039 NUOVA SIMONELLI 15800045
<|
1 2 5 1 7 0 7|>
G R IN D IN G BU RR S PA IR RO SS I L H<| |>
BURRS "HEAVY DUTY" - duration increased by 70% compared to a standard grinding burr they do not deform lower contamination of ground coffee external ø 63,5 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
NUOVA SIMONELLI
<T2
OBELT2>
<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<|
1 2 5 1 7 0 2|>
G R IN D IN G BU RR S (P A IR ) O BEL LHexternal ø 68/49 mm - internal ø 41/13 mm GRIND BURRS "HEAVY DUTY" +70% longer life cycle
thickness 25 mm - 4 mounting holes compared to a standard grinding burr inner groove for feather key they do not deform for Grinder-dispenser (BRASILIA) MC less contamination of milled coffee for Grinder-dispenser (CASADIO) GC98 ø external 63.5 mm - ø internal 37.5 mm for Grinder-dispenser (MACAP) M7K - M7KA - M7KT thickness 9 mm - 3 fixing holes for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
OBEL MT08K OBEL
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 6 2|>
G R IN D IN G BU RR S OBE L (P A IR) LEFT<|
1 2 5 1 1 1 4|>
G R IN D IN G BU RR S OBE L (P A IR) LEFTexternal ø 50 mm - internal ø 30 mm external ø 75 mm - internal ø 43.6 mm
thickness 8 mm - 3 fixing holes thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB004 - BB95 for Grinder-dispenser (CARIMALI) GT - G1 for Grinder-dispenser (CARIMALI) MJUNIOR for Grinder-dispenser (OBEL) GLOBO "G" for Grinder-dispenser (FIAMMA RST) MCF2 for Grinder-dispenser (OBEL) JUNIOR for Grinder-dispenser (SPAZIALE) JUNIOR
OBEL DF8 OBEL EB08/75
<|
1 2 5 1 0 6 1|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) LEFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB003 - BB105 BB90 for Grinder-dispenser (CARIMALI) M1 - M3 for Grinder-dispenser (OBEL) DSQ - EB - MITO for Grinder-dispenser (PAVONI) ZIP for Grinder-dispenser (RENEKA) B14
OBEL EB08
<T2
PAVONIT2>
<|
1 2 5 1 0 6 1|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) LEFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (BEZZERA) BB003 - BB105 BB90 for Grinder-dispenser (CARIMALI) M1 - M3 for Grinder-dispenser (OBEL) DSQ - EB - MITO for Grinder-dispenser (PAVONI) ZIP for Grinder-dispenser (RENEKA) B14
PAVONI 0BEB08
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
PROMACT2>
<|
1 2 5 1 0 7 2|>
G R IN D IN G BU RR S RA N C ILIO (P AIR ) L EFT<|
1 2 5 1 1 0 9|>
G R IN D IN G BU RR S RA N C ILIO (P AIR ) L EFTexternal ø 75 mm - internal ø 43 mm external ø 50 mm - internal ø 31 mm
thickness 10.5 mm - 3 mounting holes height 8 mm - 3 mounting holes for Grinder-dispenser (PROMAC) MD75 for Grinder-dispenser (PROMAC) MDCLUB for Grinder-dispenser (RANCILIO) MD80 for Grinder-dispenser (RANCILIO) MD40 - ROCKY
PROMAC 69000034 PROMAC 69000032
<|
1 2 5 1 0 7 1|>
G R IN D IN G BU RR S RA N C ILIO -V FA (P A IR ) L EFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (PROMAC) MD64 for Grinder-dispenser (RANCILIO) MD50 for Grinder-dispenser (VFA EXPRES) AE1464NEW AN1464 - E1464 - N1464
PROMAC 69000033
<T2
QUAMART2>
<|
1 2 5 1 0 7 8|>
G R IN D IN G BU RR S FIO R ENZ A TO C S R IGH T<|
1 2 5 1 0 5 2|>
G R IN D IN G BU RR S FIO R ENZ A TO M S (P A IR ) R Hexternal ø 63 mm - internal ø 38 mm external ø 83 mm - internal ø 45 mm
thickness 9.5 mm - 3 mounting holes thickness 10 mm - 3 fixing holes for Grinder-dispenser (FIORENZATO C.S.) DOGE63 for Grinder-dispenser (QUAMAR) T48 for Grinder-dispenser (QUAMAR) M1 - M80 - T80 T80D for Grinder-dispenser (VIBIEMME) VB63
QUAMAR 260001 QUAMAR 260003
<|
1 2 5 1 1 8 5|>
G R IN D IN G BU RR S PA IR FIO RE NZ A TO M S R H<| |>
external ø 75 mm - internal ø 43 mm thickness 10.5 mm - 3 fastening holes for Grinder-dispenser (QUAMAR) M1/E
QUAMAR 260002
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
QUICK MILLT2>
<|
1 2 5 1 2 5 0|>
G R IN D .BU R RS (P A IR ) Q U IC K M IL L R H<|
1 2 5 1 1 2 2|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) RHexternal ø 43 mm - internal ø 26 mm external ø 54 mm - internal ø 30.5 mm
thickness 7 mm - 3 fixing holes thickness 8.3 mm - 3 fixing holes
QUICK MILL FE023MA QUICK MILL
<|
1 2 5 1 0 6 6|>
G R IN D IN G BU RR S QU IC K M ILL (P A IR ) L EFT<| |>
external ø 66 mm - internal ø 35 mm thickness 9 mm - 3 fixing holes
QUICK MILL
<T2
RANCILIOT2>
<|
1 2 5 1 0 7 2|>
G R IN D IN G BU RR S RA N C ILIO (P AIR ) L EFT<|
1 2 5 1 1 0 9|>
G R IN D IN G BU RR S RA N C ILIO (P AIR ) L EFTexternal ø 75 mm - internal ø 43 mm external ø 50 mm - internal ø 31 mm
thickness 10.5 mm - 3 mounting holes height 8 mm - 3 mounting holes for Grinder-dispenser (PROMAC) MD75 for Grinder-dispenser (PROMAC) MDCLUB for Grinder-dispenser (RANCILIO) MD80 for Grinder-dispenser (RANCILIO) MD40 - ROCKY
RANCILIO 69000034 RANCILIO 69000032
<|
1 2 5 1 0 7 1|>
G R IN D IN G BU RR S RA N C ILIO -V FA (P A IR ) L EFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (PROMAC) MD64 for Grinder-dispenser (RANCILIO) MD50 for Grinder-dispenser (VFA EXPRES) AE1464NEW AN1464 - E1464 - N1464
RANCILIO 69000033
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
RENEKAT2>
<|
1 2 5 1 1 2 5|>
G R IN D .BU R RS A ST OR IA -M A H LK O NIG (P A IR ) L EFT<|
1 2 5 1 0 6 1|>
G R IN D IN G BU RR S OBE L-C A R IM A L I (P A IR) LEFTexternal ø 65 mm - internal ø 38 mm external ø 64 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes thickness 9 mm - 3 mounting holes for Coffee grinder (ASTORIA CMA) K30 for Grinder-dispenser (BEZZERA) BB003 - BB105 for Grinder-dispenser (MAHLKÖNIG) K30 BB90 for Grinder-dispenser (RENEKA) MK10 for Grinder-dispenser (CARIMALI) M1 - M3 for Grinder-dispenser (OBEL) DSQ - EB - MITO for Grinder-dispenser (PAVONI) ZIP for Grinder-dispenser (RENEKA) B14
RENEKA RENEKA 0005000
<|
1 2 5 1 2 2 5|>
G R IN D IN G BU RR S PA IR AS TO R IA -M A HL K ON IG L H<| |>
external ø 65 mm - internal ø 38 mm thickness 8.4 mm - 2 fixing holes for Coffee grinder (ASTORIA CMA) K30 for Coffee grinder (MAHLKÖNIG) K30 for Coffee grinder (RENEKA) MK10
RENEKA
<T2
ROSSIT2>
<|
1 2 5 1 0 5 0|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RH<|
1 2 5 1 0 7 6|>
C O N IC A L GR IND IN G B UR R S R O SS I (P A IR) RHexternal ø 38/30 mm - internal ø 26/7 mm external ø 68/49 mm - internal ø 41/13 mm
thickness 17/20,3 mm thickness 25 mm - 4 mounting holes for Coffee grinder (ISOMAC) GRANMACININO inner groove for feather key PROFESSIONALE - ROBY for Grinder-dispenser (BRASILIA) MC for Grinder-dispenser (BRASILIA) FM for Grinder-dispenser (CASADIO) GC98 for Grinder-dispenser (IBERITAL) MINIMOLINO for Grinder-dispenser (MACAP) M7K - M7KA - M7KT for Grinder-dispenser (ROSSI) FM for Grinder-dispenser (OBEL) MITOCONIC for Grinder-dispenser (ROSSI) MC
ROSSI 5200 ROSSI M5585 ROSSI 5585
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 1 6|>
G R IN D IN G BU RR S (P A IR ) R O SS I L EFT<|
1 2 5 1 0 1 1|>
G R IN D IN G BU RR S A ST RA L -RO S SI (P AIR ) L EFTexternal ø 50 mm - internal ø 31 mm external ø 64 mm - internal ø 38 mm
thickness 8.5 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (BRASILIA) BFD for Grinder-dispenser (BRASILIA) CC45 - RR45 for Grinder-dispenser (ROSSI) BFD RR55 - RR65 - R80 for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7 for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55 RR65 - R80
ROSSI 5198 ROSSI 4433
<|
1 2 5 1 0 9 4|>
G R IN D IN G BU RR S PA IR RO SS I L H<|
1 2 5 1 7 0 7|>
G R IN D IN G BU RR S PA IR RO SS I L Hexternal ø 63.5 mm - internal ø 38 mm BURRS "HEAVY DUTY" - duration increased by 70%
thickness 9 mm - 3 mounting holes compared to a standard grinding burr for Grinder-dispenser (BRASILIA) MAC64 they do not deform for Grinder-dispenser (ROSSI) MAC64 - RR55OD lower contamination of ground coffee external ø 63,5 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
ROSSI 4433.64 ROSSI
<T2
SAECOT2>
<|
1 2 5 1 1 4 6|>
C ER A M IC G R IN D ING BU R R S S AE C O (PA IR ) LE FT<| |>
external ø 48 mm - internal ø 28 mm thickness 6.5 mm
SAECO 146520100
<|
1 2 5 1 0 9 8|>
C O N IC .G R IN D .BU R R S S A EC O-G A G GIA (P A IR ) R H<|
1 2 5 1 1 9 9|>
C O N IC A L GR IND .BU RR S PA IR S A EC O -G A G G IA R Hexternal ø 47.8/31.7 mm - internal ø 28/10 mm ø external 47.8/31.7 mm - ø internal 28/10 mm
thickness 20 mm thickness 20 mm
SAECO 226477700 SAECO 9141.039 SAECO 9141.040 SAECO 226477700 SAECO 226473500
SAECO 226473500
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 0 7|>
G R IN D IN G BU RR S A RIST A R C O-G A GG IA (P A IR ) R H<|
1 2 5 1 1 7 3|>
G R IN D IN G BU RR S PA IR SA EC O /G A GG IA R Hexternal ø 84 mm - internal ø 45 mm external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 mounting holes thickness 8.5 mm - 3 fixing holes for Grinder-dispenser (ARISTARCO) EMA80 for Grinder-dispenser (GAGGIA) MD85 for Grinder-dispenser (SAECO) MS85
SAECO WGAMDB0248 SAECO 9141.072_2PZ SAECO 9141.072
<|
1 2 5 1 0 9 9|>
G R IN D IN G BU RR S SA EC O (P A IR ) L EFT<| |>
external ø 43 mm - internal ø 25 mm thickness 6.5 mm - 3 fixing holes
SAECO 126520119
<T2
SAN MARCOT2>
<|
1 2 5 1 1 3 4|>
C O N IC A L GR IND .BU RR S SA N M A R C O (P A IR ) R H<|
1 2 5 1 0 8 6|>
G R IN D IN G BU RR S SA N M AR C O (P A IR ) R Hexternal ø 68/49 mm - internal ø 40/13 mm external ø 64 mm - internal ø 37 mm
thickness 25 mm - 4 mounting holes thickness 8.5 mm - 3 mounting holes for Grinder-dispenser (SAN MARCO) SMFK - SMTK for Grinder-dispenser (SAN MARCO) SM90 - SM91 SM92
SAN MARCO 202251 SAN MARCO 202174
<|
1 2 5 1 0 8 7|>
G R IN D IN G BU RR S SA N M AR C O (P A IR ) R H<|
1 2 5 1 0 1 2|>
H A LF C ON IC AL G R IN D .BU R R S .M A RC O(PA IR) RHexternal ø 84 mm - internal ø 45 mm external ø 84/45 mm - internal ø 50/13 m
thickness 9 mm - 3 mounting holes thickness 18/9 mm - 3 mounting holes for Grinder-dispenser (SAN MARCO) SM95 - SM95A for Grinder-dispenser (SAN MARCO) SMFK - SMLK SM96 - SM97 SMMK - SM91 - SM96
SAN MARCO 202254 SAN MARCO 202213 SAN MARCO 202250
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
SANTOST2>
<|
5 0 2 3 4 4 4|>
G R IN D IN G BU RR S PA IR SA N TO S L H<| |>
external ø 64 mm - internal ø 35.5 mm thickness 9 mm - 3 mounting holes for Coffee grinder (SANTOS) 55 for Grinder-dispenser (SANTOS) 4 - 40A - 43 - 60
SANTOS 00001B SANTOS 04222 SANTOS 04227
SANTOS 43222 SANTOS 55205 SANTOS 60205
<|
1 2 5 1 0 8 1|>
G R IN D IN G BU RR S SA N TO S (PA IR ) L EFT<| |>
external ø 64 mm - internal ø 35,5 mm thickness 9 mm - 3 fixing holes for Coffee grinder (SANTOS) 55 for Grinder-dispenser (SANTOS) 40A - 43 - 60
SANTOS 00001 SANTOS 00001B SANTOS 06205
SANTOS 06302 SANTOS 40205 SANTOS 43222
SANTOS 55205 SANTOS 60205
<T2
SPAZIALET2>
<|
1 2 5 1 1 0 1|>
C O N IC A L GR IND IN G B UR R S M A C A P (P A IR ) R IGH T<|
1 2 5 1 0 0 2|>
G R IN D IN G BU RR S A NFIM (P A IR ) L EFTexternal ø 63/40 mm - internal ø 33/13 mm external ø 64 mm - internal ø 37 mm
thickness 23 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (MACAP) MXK - MXKA - MXKT for Coffee grinder (ANFIM) CAIMANO ON DEMAND for Grinder-dispenser (SPAZIALE) ASTRO8/CA for Grinder-dispenser (ANFIM) CAIMANO - LUSSO for Grinder-dispenser (SPAZIALE) LUX800
SPAZIALE 8785 SPAZIALE 749
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 0 3|>
G R IN D IN G BU RR S A NFIN (P A IR ) L H<|
1 2 5 1 3 0 2|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HTexternal ø 75 mm - internal ø 43 mm external ø 68 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes thickness 9 mm - 3 fixing holes for Grinder-dispenser (ANFIM) for Grinder-dispenser (SPAZIALE) M900 - M900A CAIMANO SPECIAL450 AUTOMATICO M900T CAIMANO SPECIAL450 TIMER SPECIAL450 AUTOMATICO - SPECIAL450 TIMER SUPER CAIMANO - SUPERLUSSO for Grinder-dispenser (SPAZIALE) S/LUX450
SPAZIALE 5592 SPAZIALE 7758
<|
1 2 5 1 3 0 4|>
G R IN D IN G BU RR S M AC A P (PA IR) RIG HT<|
1 2 5 1 0 6 2|>
G R IN D IN G BU RR S OBE L (P A IR) LEFTexternal ø 65 mm - internal ø 38 mm external ø 50 mm - internal ø 30 mm
thickness 8.5 mm - 3 fixing holes thickness 8 mm - 3 fixing holes for Coffee grinder (MACAP) MC6 - MC6T for Grinder-dispenser (BEZZERA) BB004 - BB95 for Grinder-dispenser (ELEKTRA) MX - MXA for Grinder-dispenser (CARIMALI) MJUNIOR for Grinder-dispenser (GAGGIA) MD64NEW for Grinder-dispenser (FIAMMA RST) MCF2 for Grinder-dispenser (MACAP) MX - MXA - MXT for Grinder-dispenser (OBEL) JUNIOR for Grinder-dispenser (SPAZIALE) ASTRO12 for Grinder-dispenser (SPAZIALE) JUNIOR ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
SPAZIALE 3276 SPAZIALE 4285
<T2
VFA EXPREST2>
<|
1 2 5 1 0 7 1|>
G R IN D IN G BU RR S RA N C ILIO -V FA (P A IR ) L EFT<| |>
external ø 64 mm - internal ø 38 mm thickness 9 mm - 3 mounting holes for Grinder-dispenser (PROMAC) MD64 for Grinder-dispenser (RANCILIO) MD50 for Grinder-dispenser (VFA EXPRES) AE1464NEW AN1464 - E1464 - N1464
VFA EXPRES 946005 VFA EXPRES 966005
<T2
GrindersT2>
Suitable for: Suitable for:
<T2
VIBIEMMET2>
<|
1 2 5 1 0 8 4|>
G R IN D IN G BU RR S FIO R ENZ A TO C S (PA IR ) R H<|
1 2 5 1 0 7 8|>
G R IN D IN G BU RR S FIO R ENZ A TO C S R IGH Texternal ø 83 mm - internal ø 45 mm external ø 63 mm - internal ø 38 mm
thickness 10 mm - 3 mounting holes thickness 9.5 mm - 3 mounting holes for Grinder-dispenser (FIORENZATO C.S.) DOGE83 for Grinder-dispenser (FIORENZATO C.S.) DOGE63 for Grinder-dispenser (VIBIEMME) VB83 for Grinder-dispenser (QUAMAR) M1 - M80 - T80 T80D for Grinder-dispenser (VIBIEMME) VB63
VIBIEMME MACCMADSVB83 VIBIEMME MACCMADSVB63
<T2
WEGAT2>
<|
1 2 5 1 1 3 8|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R H<| |>
external ø 58 mm - internal ø 33 mm thickness 8.5 mm - 3 mounting holes for Grinder-dispenser (COMPAK) K3
WEGA WY28217014
<|
1 2 5 1 1 4 0|>
G R IN D IN G BU RR S C OM P A K (P A IR ) R IG H T<|
1 2 5 1 5 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K R Hexternal ø 82.5 mm - internal ø 49 mm external ø 60 mm - internal ø 36 mm
thickness 9.5 mm - 3 mounting holes thickness 8 mm - 3 fixing holes for Coffee grinder (COMPAK) A8 for Grinder-dispenser (COMPAK) K5 for Grinder-dispenser (COMPAK) K8
WEGA WY28217011 WEGA WY28217006
<|
1 2 5 1 5 0 4|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R H<|
1 2 5 1 7 0 1|>
G R IN D IN G BU RR S PA IR C OM P A K-W EG A R Hexternal ø 63.5 mm - internal ø 38 mm GRIND BURRS "HEAVY DUTY" +70% longer life cycle
thickness 9 mm - 3 mounting holes compared to a standard grinding burr for Grinder-dispenser (COMPAK) K5 - K6 they do not deform less contamination of ground coffee external ø 63 mm - internal ø 38 mm thickness 9 mm - 3 fixing holes
WEGA WY28217000 WEGA
<T2
GrindersT2>
Suitable for: Suitable for:
<|
1 2 5 1 0 9 2|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HT<|
1 2 5 1 0 9 3|>
G R IN D IN G BU RR S W EG A -C O M P A K (P A IR) RIG HTø external 63 mm - ø internal 38 mm ø external 80 mm - ø internal 41 mm
thickness 9 mm - 3 fixing holes thickness 10 mm - 3 fixing holes for Grinder-dispenser (COMPAK) K8
WEGA WEGA WY28217005
<T2
GrindersT2>
The data herewith contained may change without notice and LF SpA cannot be
held responsible for possible errors stated or resulting by the use of this document.
All rights reserved. No part of this publication may be reproduced without written
permission by LF SpA.
