VINÇOTTE sa/nv
Business Class Kantorenpark Jan Olieslagerslaan , 35
1800 Vilvoorde
Belgium
0026 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
1 / 175
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
2 / 175
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
INSTITUTO DE SOLDADURA E QUALIDADE
Av.Prof.Dr.Cavaco Silva, nº33 Taguspark-Oeiras
2740 -120 Porto Salvo
Portugal
0028 11. Injection or compression rubber-moulding machinery
with manual loading or unloading
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
3 / 175
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
4 / 175
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
51105 Köln
Germany
0035 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
5 / 175
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
TÜV SÜD Industrie Service GmbH
Westendstraße 199
80686 München
Germany
0036 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
TÜV NORD CERT GmbH
Langemarckstraße 20
45141 Essen
Germany
0044 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
6 / 175
21. Logic units to ensure safety functions
IMQ ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ
S.P.A.
Via Quintiliano, 43
20138 - MILANO
Italy
0051 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
7 / 175
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
8 / 175
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
BUREAU VERITAS INSPECCION Y TESTING, S.L.
UNIPERSONAL
Camí Can Ametller, 34 Edificio Bureau Veritas 08195
Sant Cugat del Vallés (Barcelona)
08195 SANT CUGAT DEL VALLES (BARCELONA)
Spain
0056 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
9 / 175
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
OCA INSPECCION, CONTROL Y PREVENCION,
S.A.U.
Via de las dos Castillas, 7 Edificio OCA Group
28224 POZUELO DE ALARCON
Spain
0058 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
APAVE
Immeuble Canopy - 6 Rue du Général Audran
CS 60123 - 92 412 COURBEVOIE Cedex
France
0060 10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
ISTITUTO DI CERTIFICAZIONE EUROPEA PRODOTTI
INDUSTRIALI S.P.A.
Via Paolo Belizzi, 29/33
29122 - PIACENZA (PC)
Italy
0066 6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
10 / 175
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
11 / 175
23. Falling-object protective structures (FOPS)
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
12 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
MTIC InterCert S.r.l.
Sede Legale: Via G.Leopardi, 14 - Sede Operativa: Via
Moscova, 11
20123 - Milano (MI) - 20017 - Rho (MI)
Italy
0068 19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
13 / 175
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
14 / 175
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
2. Hand-fed surface planing machinery for woodworking
INSTITUT NATIONAL DE L'ENVIRONNEMENT
INDUSTRIEL ET DES RISQUES
Parc Technologique Alata BP 2
F60550 Verneuil-en-Halatte
France
0080 21. Logic units to ensure safety functions
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
TÜV Thüringen e.V.
Melchendorfer Straße 64
99096 Erfurt
Germany
0090 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
15 / 175
16. Vehicle servicing lifts
LLOYD'S REGISTER ESPAÑA, S.A.
C/ Princesa, 29-1°
28008 MADRID
Spain
0094 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
AENOR INTERNACIONAL, S.A. (Unipersonal)
Génova, 6
E-28004 MADRID
Spain
0099 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
16 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
17 / 175
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
18 / 175
Konformitätsbewertungsstelle der
Physikalisch-Technischen Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany
0102 18. Portable cartridge-operated fixing and other impact
machinery
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Institut für Arbeitsschutz der Deutschen Gesetzlichen
Unfallversicherung (IFA) Prüf- und Zertifizierungsstelle
im DGUV Test
Alte Heerstraße 111
D-53757 Sankt Augustin
Germany
0121 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
TÜV SÜD Product Service GmbH Zertifizierstellen
Ridlerstraße 65
80339 MÜNCHEN
Germany
0123 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
19 / 175
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
20 / 175
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
DEKRA Testing and Certification GmbH
Handwerkstraße 15
70565 Stuttgart
0158 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
21 / 175
Germany following type: hydraulic-powered roof supports
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
19. Protective devices designed to detect the presence
of persons
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
22 / 175
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
23 / 175
8. Portable chainsaws for woodworking
TÜV Rheinland LGA Products GmbH
Tillystraße 2
90431 Nürnberg
Germany
0197 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
24 / 175
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
25 / 175
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
ANCCP Certification Agency Srl
Via Dello Struggino, 6
57121 - LIVORNO (LI)
Italy
0302 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
26 / 175
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
27 / 175
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
DGUV Test Prüf- und Zertifizierungsstelle Elektrotechnik
Fachbereich Energie Textil Elektro Medienerzeugnisse
der Deutschen Gesetzlichen Unfallversicherung e.V.
(DGUV)
Gustav-Heinemann-Ufer 130
50968 Köln
Germany
0340 19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Deutsche Prüf- und Zertifizierungsstelle für Land- und
Forsttechnik
Spremberger Straße 1
64823 Groß-Umstadt
Germany
0363 8. Portable chainsaws for woodworking
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
28 / 175
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
VDE Prüf- und Zertifizierungsinstitut GmbH
Merianstraße 28
63069 Offenbach
Germany
0366 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
29 / 175
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
8. Portable chainsaws for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
30 / 175
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
LGAI TECHNOLOGICAL CENTER, S. A./Applus
Campus UAB, Apto Correos 18
08193 BELLATERRA (Barcelona)
Spain
0370 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
DEKRA Industrial SAS
34/36 rue Alphonse Pluchet CS60002
92227 BAGNEUX CEDEX
France
0384 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
IRSTEA
1 rue Pierre-Gilles de Gennes CS 10030
0388 15. Guards for removable mechanical transmission
devices
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
31 / 175
92761 Antony Cedex
France14. Removable mechanical transmission devices
including their guards
DGUV Test Prüf- und Zertifizierungsstelle Holz
Fachbereich Holz und Metall der Deutschen
Gesetzlichen Unfallversicherung e.V. (DGUV)
Vollmoellerstraße 11
70563 STUTTGART
Germany
0392 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
32 / 175
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
DGUV Test Prüf- und Zertifizierungsstelle Hebezeuge,
Sicherheitskomponenten und Maschinen Fachbereich
Holz und Metall der Deutschen Gesetzlichen
Unfallversicherung e.V. (DGUV)
Arcadiastraße 8
D-40472 DÜSSELDORF
0393 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
33 / 175
Germany 11. Injection or compression rubber-moulding machinery
with manual loading or unloading
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
TEKNOLOGISK INSTITUT - Certificering & Inspektion
Kongsvang Allé 29
8000 Arhus C
Denmark
0396 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
34 / 175
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
35 / 175
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
21. Logic units to ensure safety functions
2. Hand-fed surface planing machinery for woodworking
ORGANISMO DI CERTIFICAZIONE EUROPEA SRL
Via Pietro Nenni, 32
00036 - Palestrina (RM)
Italy
0397 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
36 / 175
APAVE ITALIA CPM SRL
Via Artigiani, 63
25040 - Bienno (BS)
Italy
0398 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
ABOMA B.V.
Maxwellstraat 49a - Postbus 141
6710 BC EDE
Netherlands
0399 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
LIFTINSTITUUT B.V.
Postbus 36027
1020 MA Amsterdam
Netherlands
0400 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
RISE Research Institutes of Sweden AB
Box 857
501 15 BORAS
Sweden
0402 21. Logic units to ensure safety functions EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
37 / 175
RISE SMP SVENSK MASKINPROVNING AB
Ultunaallén 4 Box 7035
750 07 UPPSALA
Sweden
0404 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
38 / 175
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
39 / 175
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
ISTITUTO GIORDANO S.P.A.
Via Rossini, 2
47814 - Bellaria (RN)
Italy
0407 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
40 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
41 / 175
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
TÜV AUSTRIA SERVICES GMBH
Deutschstraße 10
1230 WIEN
Austria
0408 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
42 / 175
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
43 / 175
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
44 / 175
of persons
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
Kiwa Sweden AB
PO Box 7178 Råsundavägen 12
SE-170 07 SOLNA
Sweden
0409 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
DGUV Test Prüf- und Zertifizierungsstelle Fachbereich
Verkehr und Landschaft der Deutschen Gesetzlichen
Unfallversicherung e.V. (DGUV)
Ottenser Hauptstrasse 54
22765 HAMBURG
Germany
0417 13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
INSPECTA TARKASTUS OY
(Sörnäistenkatu 2) P.O. Box 1000
FIN-00581 Helsinki
Finland
0424 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
ICIM S.P.A.
Piazza Don Enrico Mapelli, 75
20099 - Sesto San Giovanni (MI)
Italy
0425 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
45 / 175
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
ITALCERT SRL
Viale Sarca, 336
20126 - MILANO
Italy
0426 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
46 / 175
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
47 / 175
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
MATERIALS INDUSTRIAL RESEARCH AND
TECHNOLOGY CENTER S.A.(MIRTEC S.A.)
A-Industrial Area
GR-38500 Volos
Greece
0437 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CENTRO DE APOIO TECNOLÓGICO À INDÚSTRIA
METALOMECÂNICA
Rua dos Plátanos, 197
4100 - 414 PORTO
Portugal
0464 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
48 / 175
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
49 / 175
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
RINA Services S.P.A.
Via Corsica, 12
16128 - GENOVA
Italy
0474 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
50 / 175
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
KIWA CERMET ITALIA S.P.A.
Via Cadriano, 23
40057 - Cadriano di Granarolo (BO)
Italy
0476 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
21. Logic units to ensure safety functions
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
51 / 175
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
52 / 175
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Eurofins Product Testing Italy S.r.l.
Via Courgnè, 21
10156 - TORINO (TO)
Italy
0477 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
53 / 175
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
54 / 175
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
SLG PRÜF UND ZERTIFIZIERUNGS GMBH
Burgstädter Strasse 20
0494 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
55 / 175
09232 Hartmannsdorf
Germanyfixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
56 / 175
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
57 / 175
STICHTING KEURINGSBUREAU HOUT (SKH)
Nieuwe kanaal 9c, P.O. Box 159
6700 AD WAGENINGEN
Netherlands
0502 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
58 / 175
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
VENETA ENGINEERING SRL
Via Lovanio, 8/10
37135 - VERONA
Italy
0505 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
17. Devices for the lifting of persons or of persons and
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
59 / 175
goods involving a hazard of falling from a vertical height
of more than three metres
Deutsche Gesetzliche Unfallversicherung e.V. DGUV
Test Prüf- und Zertifizierungsstelle Fachbereich
Bauwesen c/o BG BAU - Prävention
Am Knie 6
81241 MÜNCHEN
Germany
0515 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
DGUV Test Prüf- und Zertifizierungsstelle
Nahrungsmittel und Verpackung Fachbereich
Nahrungsmittel der Deutschen Gesetzlichen
Unfallversicherung e.V. (DGUV)
Dynamostraße, 7-11
68165 MANNHEIM
Germany
0556 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
60 / 175
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
Rambøll Oil and Gas AS
P.O. Box 113
3015 Drammen
Norway
0572 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
SGS FIMKO OY
Takomotie 8
00380 HELSINKI
Finland
0598 1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
61 / 175
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
62 / 175
with similar physical characteristics
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
DEKRA Industrial AB
Hemvärnsgatan 11B
171 54 SOLNA
0640 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
63 / 175
Sweden of more than three metres
Deutsche Gesetzliche Unfallversicherung e.V. (DGUV),
DGUV Test, Prüf- und Zertifizierungsstelle, Fachbereich
Holz und Metall
Isaac-Fulda-Allee 18
55124 MAINZ
Germany
0697 19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
64 / 175
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
65 / 175
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
ECO - European Certifying Organization S.p.A.
Via Mengolina, 33
48018 - Faenza (RA)
Italy
0714 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
66 / 175
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
67 / 175
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
8. Portable chainsaws for woodworking
DGUV Test Prüf- und Zertifizierungsstelle Druck und
Papierverarbeitung Fachbereich Energie Textil Elektro
Medienerzeugnisse der Deutschen Gesetzlichen
Unfallversicherung e.V. (DGUV)
Rheinstraße 6-8
65185 WIESBADEN
Germany
0739 1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
68 / 175
working with meat and material with similar physical
characteristics
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
SOCOTEC Equipements
5, place des Frères Montgolfier Guyancourt, - CS 20732
0
78182 Saint-Quentin-en-Yvelines Cedex
France
0744 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
ift Rosenheim GmbH
Theodor-Gietl-Straße 7-9
83026 Rosenheim
Germany
0757 19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
SEUCER SRL
Via Vivaio, 16
20122 - MILANO
0897 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
69 / 175
Italy goods involving a hazard of falling from a vertical height
of more than three metres
EUCERT Organismo di Certificazione Europeo s.r.l.
Via G. Paisiello, 152
50144 - FIRENZE
Italy
0899 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
16. Vehicle servicing lifts
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
SICURCERT S.r.l.
Via Gaspare Spontini, 10
51100 - PISTOIA (PT)
Italy
0902 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
INTERTEK DEUTSCHLAND GMBH
Stangenstraße 1
70771 LEINFELDEN-ECHTERDINGEN
Germany
0905 1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
70 / 175
2. Hand-fed surface planing machinery for woodworking
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
71 / 175
with manual loading or unloading
8. Portable chainsaws for woodworking
21. Logic units to ensure safety functions
TUV AUSTRIA HELLAS LTD
Mesogeion Ave 429
153 43 Ag. Paraskeyi Athens
Greece
0906 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CENPI SCRL - CONSORZIO EUROPEO DI
NORMALIZZAZIONE E PREVENZIONE INFORTUNI
VIA MALTA 12 - INT. 145
25124 BRESCIA
Italy
0934 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
IeS INGEGNERIA E SICUREZZA DEGASPERI S.R.L.
Via Marie Curie, 17
39100 - BOLZANO (BZ)
Italy
0937 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
TUV ITALIA SRL
Via Mauro Macchi, 27
20124 - Milano (MI)
Italy
0948 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
72 / 175
21. Logic units to ensure safety functions
TÜV Rheinland InterCert Muszaki Felügyeleti és
Tanúsító Korlátolt Felelosségu Társaság
Gizella út 51-57.
H-1143 Budapest
Hungary
1008 21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
73 / 175
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
74 / 175
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
STROJIRENSKY ZKUSEBNI USTAV s.p.
Hudcova 56b
621 00 BRNO
Czech Republic
1015 1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
75 / 175
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
76 / 175
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
1.1. Circular saws (single- or multi-blade) - sawing
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
77 / 175
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
STATNI ZKUSEBNA STROJU, a. s.
Tranovskeho 622/11
163 04 PRAHA 6
Czech Republic
1016 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
78 / 175
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
79 / 175
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
TÜV SÜD Czech s. r. o.
Novodvorska 994
142 21 PRAHA 4
Czech Republic
1017 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
80 / 175
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
81 / 175
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
VVUU, a.s.
Pikartska 1337/7
716 07 OSTRAVA - RADVANICE
Czech Republic
1019 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
82 / 175
E.S.C. ENGINEERING SAFETY CERTIFICATION S.r.l.
Viale della Regione, 6
93100 - Caltanissetta (CL)
Italy
1094 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
EUROPEAN INSPECTION AND CERTIFICATION
COMPANY SA - EUROCERT SA
89 Chlois and Likovrisis
144 52 Metamorfosi ATTIKIS ATHENS
Greece
1128 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
SGS – Statutory Services Belgium vzw/asbl
Boulevard International 55/K
1070 BRUXELLES
Belgium
1179 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
TÜV NEDERLAND QA B.V.
Ekkersrijt 4401
5692 DL Son en Breugel
Netherlands
1231 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
ETEL SA
39 Sof. Venizelou and 9 Solonos
15232 CHALANDRI, ATHENS
Greece
1240 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Suva CERTIFICATION
Rösslimattstrasse 39, Postfach 4358
6002 LUZERN
Switzerland
1246 4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
83 / 175
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
84 / 175
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
85 / 175
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
Zertifizierungsstelle SIBE Schweiz
Brünigstrasse 18
6005 LUZERN
Switzerland
1247 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
86 / 175
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
87 / 175
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
88 / 175
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
ENTE CERTIFICAZIONE MACCHINE SRL
Via Ca’ Bella, 243/A - loc. Castello di Serravalle
40053 Valsamoggia (BO)
Italy
1282 4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
89 / 175
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
90 / 175
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
14. Removable mechanical transmission devices
including their guards
16. Vehicle servicing lifts
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
Technicky skusobny ustav Piestany s.p.
Krajinska cesta 2929/9
1299 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
91 / 175
921 24 Piestany
Slovakiafixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
92 / 175
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
93 / 175
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
SLOVENIAN INSTITUTE OF QUALITY AND
METROLOGY - SIQ
Mašera - Spasi#eva ulica 10
1000 LJUBLJANA
Slovenia
1304 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
94 / 175
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
95 / 175
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
96 / 175
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
TÜV SÜD SLOVAKIA s.r.o.
Jasikova 6
821 03 BRATISLAVA
Slovakia
1353 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
97 / 175
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
98 / 175
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Technicka inspekcia a.s.
Trnavska cesta 56
821 01 BRATISLAVA
Slovakia
1354 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
99 / 175
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
100 / 175
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
BUREAU VERITAS ITALIA S.P.A.
Viale Monza, 347
20126 - MILANO (MI)
Italy
1370 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
101 / 175
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
SGS ITALIA S.P.A.
Via Caldera, 21
20153 - MILANO (MI)
Italy
1381 11. Injection or compression rubber-moulding machinery
with manual loading or unloading
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
102 / 175
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
TECHNICKE LABORATORE OPAVA, akciova
spolecnost
Tesinska 2962/79b
74601 Opava
Czech Republic
1384 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
STATE LIMITED LIABILITY COMPANY
CERTIFICATION AND TESTING CENTRE
Darza street 12, Priekulu pagasts
LV-4126 Cesu rajons
Latvia
1411 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
103 / 175
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
104 / 175
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
ÉMI-TÜV SÜD MIN#SÉGÜGYI ÉS
BIZTONSÁGTECHNIKAI KFT.
Dózsa György u. 26.
2000 SZENTENDRE
Hungary
1417 16. Vehicle servicing lifts
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
105 / 175
of more than three metres
TÜV Rheinland-KTI M#szaki Ellen#rz# és Szolgáltató
Kft.
Thán Károly u. 3-5
1119 Budapest
Hungary
1423 13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
URZAD DOZORU TECHNICZNEGO
ul. Szczesliwicka 34
02-353 Warszawa
Poland
1433 13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
21. Logic units to ensure safety functions
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
ZAKLADY BADAN I ATESTACJI ZETOM; IM. PROF. F.
STAUBA W KATOWICACH SP. Z O.O.
ul. Ks. Bpa Herberta Bednorza 17
40-384 KATOWICE
Poland
1436 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CENTRALNY INSTYTUT OCHRONY PRACY -
PANSTWOWY INSTYTUT BADAWCZY (CIOP-PIB)
1437 1.1. Circular saws (single- or multi-blade) - sawing EC type-examination Annex IX - Art. 12
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
106 / 175
ul. Czerniakowska 16
00-701 WARSZAWA
Poland
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
Full quality assurance (3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
107 / 175
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
108 / 175
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
SIE# BADAWCZA #UKASIEWICZ - INSTYTUT
MIKROELEKTRONIKI I FOTONIKI - ODDZIA#
PREDOM
ul. Krakowiakow 53
02-255 WARSZAWA
Poland
1451 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
109 / 175
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
GLÓWNY INSTYTUT GÓRNICTWA
Plac Gwarków 1
40 166 KATOWICE
Poland
1453 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
110 / 175
SIE# BADAWCZA #UKASIEWICZ - INSTYTUT
MECHANIZACJI BUDOWNICTWA I GORNICTWA
SKALNEGO
ul. Racjonalizacji 6/8
02-673 Warszawa
Poland
1454 14. Removable mechanical transmission devices
including their guards
18. Portable cartridge-operated fixing and other impact
machinery
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
SIEC BADAWCZA LUKASIEWICZ - KRAKOWSKI
INSTYTUT TECHNOLOGICZNY
Ul. Zakopianska 73
30-418 KRAKOW
Poland
1455 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
111 / 175
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
112 / 175
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
21. Logic units to ensure safety functions
INSTYTUT TECHNIKI GORNICZEJ KOMAG
ul. Pszczynska 37
44-101 GLIWICE
Poland
1456 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Osrodek Badan i Certyfikacji SIMPTESTCERT Sp. z o.o.
ul. Astrow 10
40-045 KATOWICE
Poland
1458 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
113 / 175
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
114 / 175
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
INSTYTUT TECHNOLOGICZNO-PRZYRODNICZY
Falenty ul. Hrabska 3
05-090 RASZYN
Poland
1459 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
115 / 175
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
8. Portable chainsaws for woodworking
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
116 / 175
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
OSRODEK BADAN, ATESTACJI I CERTYFIKACJI
OBAC SP. Z.O.O.
ul. Labedzka 21
44-121 GLIWICE
Poland
1461 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
117 / 175
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
118 / 175
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
21. Logic units to ensure safety functions
TRANSPORTOWY DOZOR TECHNICZNY
ul. Pu#awska 125
02-707 WARSZAWA
Poland
1468 23. Falling-object protective structures (FOPS)
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
22. Roll-over protective structures (ROPS)
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
INSTITUTE OF OCCUPATIONAL SAFETY
Pot k izviru 6
1000 LJUBLJANA
Slovenia
1493 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
INOVA CENTRUM INNOWACJI TECHNICZNYCH SP.
Z O.O.
Ul. Marii Sklodowskiej - Curie 183
59-301 LUBIN
1547 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
23. Falling-object protective structures (FOPS)
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
119 / 175
Poland 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
16. Vehicle servicing lifts
22. Roll-over protective structures (ROPS)
CNIM SRL
Via della Ferratella in Laterano, 41
00184 - ROMA
Italy
1562 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
QMSCERT AUDITS-INSPECTIONS-CERTIFICATIONS
LTD. (Q-CERT LTD.)
26th October 90
54627 Thessaloniki
Greece
1617 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
SGS-TÜV Saar GmbH
Am TÜV 1
66280 SULZBACH
Germany
1637 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
120 / 175
TRIVENETO SRL
Via 8/9 Maggio 1848, 70
31041 Cornuda (TV)
Italy
1708 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CERTAT S.r.l.
Via Mentana, 50
05100 - TERNI (TR)
Italy
1752 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CERTIFICAZIONI SRL
Via 1° Maggio, 86/C
40026 - IMOLA (BO)
Italy
1791 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CEPROM S.A.
Sediu: Str. Fântânele, nr.FN (Platforma Industrial#),
Satu Mare, jude#ul Satu Mare;
440240 Satu Mare
Romania
1802 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
121 / 175
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
122 / 175
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Institutul National de Cercetare-Dezvoltare pentru Masini
si Instalatii destinate Agriculturii si Industriei Alimentare
Bulevardul Ion Ionescu de la Brad 6, sector 1
013813 Bucuresti
Romania
1804 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
123 / 175
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
124 / 175
mm and a speed exceeding 30 mm/s
22. Roll-over protective structures (ROPS)
HHC/DRS B.V.
De Kokkel 4a
1723 HX Noord-Scharwoude
Netherlands
1869 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CENTER FOR TESTING AND EUROPEAN
CERTIFICATION Ltd.
2, Industrialna Str. post box 131
6000 Stara Zagora
Bulgaria
1871 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
125 / 175
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
126 / 175
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
VERICERT SRL
Via L. Masotti n. 5
48124 - in Fornace Zarattini (RA)
Italy
1878 2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
127 / 175
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
128 / 175
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
129 / 175
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
19. Protective devices designed to detect the presence
of persons
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
21. Logic units to ensure safety functions
Kiwa Belgelendirme Hizmetleri A.#.
#TOSB 9. CAD. NO:15 Tepeören Tuzla / #STANBUL
Istanbul
Turkey
1984 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
130 / 175
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
131 / 175
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
SRAC CERT SRL
Str. Vasile Parvan nr.14, cod 010216, sector 1
Bucuresti
Romania
2003 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Full quality assurance Annex X - Art. 12 (3)
(c) and (4) (b)
J.S. HAMILTON POLAND Sp. z o.o.
ul. Chwaszczynska 180 81-571 Gdynia
2057 12.1. Machinery for underground working of the
following type: locomotives and brake-vans
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
132 / 175
Jednostka Certyfikujaca ul. Wyzwolenia 14 41-103
Siemianowice Slaskie
Poland
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
16. Vehicle servicing lifts
Annex X - Art. 12 (3)
(c) and (4) (b)
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
"NB LIFTCONTROL" Ltd.
34, Totleben Blvd., Building No 5; P.O.Box No40
1606 Sofia
Bulgaria
2090 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Alberk QA Uluslararas# Teknik Kontrol ve Belgelendirme
Anonim #irketi
Barbaros Mahallesi Ak Zambak Sokak Varyap Meridyan
A Blok Kat: 19 Ata#ehir
Istanbul
Turkey
2138 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
16. Vehicle servicing lifts
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Sozialversicherung für Landwirtschaft, Forsten und
Gartenbau
Weißensteinstraße 70/72
34131 Kassel
Germany
2157 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
133 / 175
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
134 / 175
POTA Prüf-Organisation Technischer Anlagen
Hornweg 31
6370 Kitzbühel
Austria
2187 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Szutest Uygunluk De#erlendirme A.#.
Tatl#su Mahallesi Akif #nan Sk. No:1/1 Ümraniye /
#stanbul
#STANBUL
Turkey
2195 1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
135 / 175
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Full quality assurance Annex X - Art. 12 (3)
(c) and (4) (b)
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
SGS Supervise Gözetme Etüd Kontrol Servisleri A.#. 2218 1.1. Circular saws (single- or multi-blade) - sawing EC type-examination Annex IX - Art. 12
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
136 / 175
Ba#lar Mahallesi Osmanpa#a Caddesi No:95 Ba#c#lar
#stanbul
Turkey
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
137 / 175
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
138 / 175
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
SWISS APPROVAL TECHNISCHE BEWERTUNG S.A.
TRAPEZOUNTOS & DIGENI AKRITA STREET
P.C. 19200, GREECE
ELEFSINA
Greece
2221 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Projects etc Pty Ltd
7 Clunies Ross Court, Brisbane Technology Park,
Eight Mile Plains, QLD 4113
Australia
2241 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
139 / 175
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
140 / 175
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
12.1. Machinery for underground working of the
following type: locomotives and brake-vans
12.2. Machinery for underground working of the
following type: hydraulic-powered roof supports
13. Manually loaded trucks for the collection of
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
141 / 175
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
TUV CYPRUS LTD
2 Papaflessas str., 2235 Latsia. Postal Address: P.O
BOX 20732, 1663 Nicosia
Nicosia
Cyprus
2261 20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
142 / 175
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
19. Protective devices designed to detect the presence
of persons
UDEM Uluslararasi Belgelendirme Denetim Egitim
Merkezi San. ve Tic. A.#.
Mutlukent Mahallesi 2073 Sokak No:10
Umitkoy-CANKAYA
Ankara
Turkey
2292 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
143 / 175
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
144 / 175
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
ELETTRA SRL
Via Matteucci, 10
50041 - Calenzano (FI)
Italy
2321 16. Vehicle servicing lifts
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Nortest Cyprus LTD
98 Arch. Makariou 2224, Latsia
Lefkosia
Cyprus
2338 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Quality Italia S.r.l.
Via Camerata Picena 385
00138 ROMA (RM)
Italy
2342 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
INTEGRA 96 Uluslararas# Ürün ve Sistem
Belgelendirme Ba#. Den. Göz. E#it. Hiz. Ltd. #ti.
Maltepe Mahallesi 8090/1 Sokak No:5A Çi#li/#ZM#R
2422 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
145 / 175
#zmir
Turkeymm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
(c) and (4) (b)
BENART Uluslararas# Teknik Kontrol ve Belgelendirme
Ltd. #ti.
#vedikköy Mahallesi Melih Gökçek Bulvar# No: 140/15
Yenimahalle/Ankara
Ankara
Turkey
2430 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
146 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
147 / 175
characteristics
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
LL-C (Certification) Czech Republic a.s.
Pobrezní 620/3
186 00 Praha 8
Czech Republic
2435 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
TÜV SÜD Danmark
Strandvejen 125
2900 Hellerup
Denmark
2443 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
148 / 175
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
149 / 175
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Inspecco Belgelendirme ve Gözetim Hizmetleri A. #.
#erifali Mah. Aç#kyüz Sok. No: 2-3 Ümraniye
2459 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
150 / 175
#stanbul
Turkeyof more than three metres
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
151 / 175
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
16. Vehicle servicing lifts
DNV Product Assurance AS
Veritasveien 3
1363 Høvik
Norway
2460 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Zavod za ispitivanje kvalitete robe d.o.o.
Škrape 53
2466 17. Devices for the lifting of persons or of persons and EC type-examination Annex IX - Art. 12
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
152 / 175
21000 Split
Croatiagoods involving a hazard of falling from a vertical height
of more than three metres
(3) (b) and (4) (a)
TCS Uluslararas# Belgelendirme Hizmetleri San. ve Tic.
Ltd. #ti.
Barbaros Mahallesi Kent Sokak Bovona Giyim
Apartman# No:8-10/1 Ata#ehir/#stanbul
#stanbul
Turkey
2513 16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Limited liability company "International Center for Quality
Certification - ICQC"
Skolas street 63-19
Jurmala
Latvia
2549 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
153 / 175
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
16. Vehicle servicing lifts
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
154 / 175
characteristics
Certing S.r.l.
Sede Legale: Piazza Mancini, 4 - Sede Operativa: Via
Filippo Turati, 17
00196 - ROMA (RM) - 00038 - Valmontone (RM)
Italy
2624 22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
FQC Standard Sertifikasyon Muayene Laboratuvar ve
E#itim Hizmetleri Anonim #irketi
Güzelyurt Mahallesi, 5775 Sokak No:34/A Yunusemre
MAN#SA
Turkey
2674 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Bureau Veritas Exploitation SAS
8 cours du Triangle CS 20098
92937 Paris La Défense CEDEX
France
2681 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
155 / 175
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
156 / 175
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Heiskontrollen AS
Sognsveien 75F
0855 Oslo
Norway
2692 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
UDEM Adriatic d.o.o.
Radni#ka cesta 54/R3
Zagreb
Croatia
2696 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
13. Manually loaded trucks for the collection of
household refuse incorporating a compression
mechanism
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
157 / 175
goods involving a hazard of falling from a vertical height
of more than three metres
ICR Polska Sp. z o.o.
Plac Przymierza 6
03-944 Warszawa
Poland
2703 9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
FEMKO Uluslararas# Teknik Kontrol E#itim
Belgelendirme Limited #irketi
Kaz#m Dirik Mahallesi 372/7 Sokak No:8 Bornova
#zmir
Turkey
2705 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
TÜV AUSTRIA TURK BELGELEND#RME E##T#M VE
GÖZET#M H#Z. LTD. #T#.
Çaml#k Mahallesi Dinç Sokak No:28
Ümraniye / #stanbul
Turkey
2737 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
158 / 175
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
159 / 175
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Art#bel Belgelendirme Teknik Kontrol Gözetim ve E#itim
Hizmetleri Limited #irketi
Alsancak Mahallesi 2066 Cadde No:1/1 Etimesgut /
Ankara
Turkey
2742 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
160 / 175
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
161 / 175
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
Notice Belgelendirme, Muayene ve Denetim Hizmetleri
Anonim #irketi
Esentepe Mahallesi Milangaz Caddesi No:75 A/92
Kartal/#stanbul
Istanbul
Turkey
2764 16. Vehicle servicing lifts
1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
162 / 175
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
163 / 175
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
8. Portable chainsaws for woodworking
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Safenet Certification Services Ltd
Ducart Suite Castletroy Camp Commercial Campus
Plassey Park Road Castletroy Limerick V94 Y6FD
Limerick
Ireland
2805 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
164 / 175
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
165 / 175
characteristics
8. Portable chainsaws for woodworking
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
166 / 175
23. Falling-object protective structures (FOPS)
CerTrust Kft.
Váci út 49. (DC offices) 6. em.
1134 Budapest
Hungary
2806 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
167 / 175
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
168 / 175
with manual loading or unloading
14. Removable mechanical transmission devices
including their guards
15. Guards for removable mechanical transmission
devices
19. Protective devices designed to detect the presence
of persons
22. Roll-over protective structures (ROPS)
23. Falling-object protective structures (FOPS)
Lloyd's Register Verification B.V.
K.P. van der Mandelelaan 41A
Rotterdam
Netherlands
2814 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination
Full quality assurance
Annex IX - Art. 12
(3) (b) and (4) (a)
Annex X - Art. 12 (3)
(c) and (4) (b)
UL International (Netherlands) B.V.
Westervoortsedijk 60
6827 AT ARNHEM
Netherlands
2821 19. Protective devices designed to detect the presence
of persons
20. Power-operated interlocking movable guards
designed to be used as safeguards in machinery
referred to in points 9, 10 and 11
21. Logic units to ensure safety functions
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CCQS Certification Services Limited
Block 1 Blanchardstown Corporate Park, Ballycoolin
Road, Blanchardstown, Dublin 15 D15 AKK1
Dublin
Ireland
2834 4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
169 / 175
mm and a speed exceeding 30 mm/s
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Kuiper Certificering B.V.
Van Slingelandtstraat 75, 7331NM
Apeldoorn
Netherlands
2842 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
170 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
10. Injection or compression plastics-moulding
machinery with manual loading or unloading
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
18. Portable cartridge-operated fixing and other impact
machinery
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
171 / 175
CTI-CEM International Ltd
Unit 200 Greenogue Business Park, Grants Lane,
Rathcoole
Dublin
Ireland
2845 10. Injection or compression plastics-moulding
machinery with manual loading or unloading
11. Injection or compression rubber-moulding machinery
with manual loading or unloading
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
19. Protective devices designed to detect the presence
of persons
21. Logic units to ensure safety functions
22. Roll-over protective structures (ROPS)
9. Presses, including press-brakes, for the cold working
of metals, with manual loading and/or unloading, whose
movable working parts may have a travel exceeding 6
mm and a speed exceeding 30 mm/s
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
AVACERT Anadolu Uluslararas# Belgelendirme
Denetim Teknik Kontrol E#itim ve Test Hizmetleri
Limited #irketi
Be#evler Mahallesi Kocayunus Sokak No:3 Arslan Han
## Merkezi Kat:2 No:9
Nilüfer /Bursa
Turkey
2864 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
CGS Test Hizmetleri Teknik Kontrol ve Belgelendirme
Anonim #irketi
Kay##da## Mah. Gülçin Sok. No:2/2 Ata#ehir #stanbul
#stanbul
Turkey
2891 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
172 / 175
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
FINN-Tarkastus Oy
Puusepänkatu 5
13110 Hämeenlinna
Finland
2902 17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Testplus Teknik Kontrol ve Belgelendirme Ticaret
Limited #irketi
Abdurrahmangazi Mahallesi Ebubekir Caddesi No:34/15
Sancaktepe #stanbul / TURKEY
#stanbul
Turkey
2908 1.1. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
fixed bed or support with manual feed of the workpiece
or with a demountable power feed - for working with
wood and material with similar physical characteristics or
EC type-examination Annex IX - Art. 12
(3) (b) and (4) (a)
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
173 / 175
for working with meat and material with similar physical
characteristics
1.2. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
manually operated reciprocating saw-bench or carriage -
for working with wood and material with similar physical
characteristics or for working with meat and material with
similar physical characteristics
1.3. Circular saws (single- or multi-blade) - sawing
machinery with fixed blade(s) during cutting, having a
built-in mechanical feed device for the workpieces, with
manual loading and/or unloading - for working with wood
and material with similar physical characteristics or for
working with meat and material with similar physical
characteristics
1.4. Circular saws (single- or multi-blade) - sawing
machinery with movable blade(s) during cutting, having
mechanical movement of the blade, with manual loading
and/or unloading - for working with wood and material
with similar physical characteristics or for working with
meat and material with similar physical characteristics
2. Hand-fed surface planing machinery for woodworking
3. Thicknessers for one-side dressing having a built-in
mechanical feed device, with manual loading and/or
unloading for woodworking
4.1. Band-saws with manual loading and/or unloading -
sawing machinery with fixed blade(s) during cutting,
having a fixed or reciprocating-movement bed or support
for the workpiece - for working with wood and material
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
174 / 175
with similar physical characteristics or for working with
meat and material with similar physical characteristics
4.2. Band-saws with manual loading and/or unloading -
sawing machinery with blade(s) assembled on a
carriage with reciprocating motion - for working with
wood and material with similar physical characteristics or
for working with meat and material with similar physical
characteristics
5. Combined machinery of the types referred to in points
1 to 4 and in point 7 for working with wood and material
with similar physical characteristics
6. Hand-fed tenoning machinery with several tool
holders for woodworking
7. Hand-fed vertical spindle moulding machinery for
working with wood and material with similar physical
characteristics
16. Vehicle servicing lifts
17. Devices for the lifting of persons or of persons and
goods involving a hazard of falling from a vertical height
of more than three metres
Creation Date : 29/11/2021
LIST OF BODIES NOTIFIED UNDER DIRECTIVE : 2006/42/EC Machinery
Name and address of the notified bodies Identificationnumber
Responsible for the following products Responsible for the followingprocedures or modules
Annexes orarticles of the
directives
175 / 175