List of IEC Standards

List of IEC standards

From Wikipedia, the free encyclopedia

Jump to: navigation, search

To distinguish standards published by the International Electrotechnical Commission numerically from other

international standards, their number range was shifted in 1997 by adding 60000. So what used to be called

IEC 27 is now officially IEC 60027, and so on. However, the old numbers remain commonly used. The 60000

series of standards are also found preceded by EN to indicate the IEC standards harmonized as European

standards; for example IEC 60034 would be EN 60034. IEC standards are also being adopted as harmonized

standards by other certifying bodies such as BSI (Great Britain), CSA (Canada), UL (USA) and SABS (South

Africa). IEC standards harmonized by other certifying bodies generally have some noted differences from the

original IEC standard.[1]

This list is incomplete; you can help by expanding it.

This is an incomplete list of IEC standards that includes many of the more widely known and used ones,

with a particular emphasis on those that are discussed in Wikipedia articles:

IEC 60027 Letter symbols to be used in electrical technology...

IEC 60034 Rotating electrical machinery

IEC 60038 IEC Standard Voltages

IEC 60044 Instrument transformers

IEC 60044-1 Current transformers

IEC 60050 International Electrotechnical Vocabulary

IEC 60062 Marking codes for resistors and capacitors

IEC 60063 Preferred number series for resistors and capacitors

IEC 60065 Audio, video and similar electronic apparatus - Safety requirements

IEC 60068 Environmental Testing

IEC 60071 Insulation Co-ordination

IEC 60073 Basic Safety principles for man-machine interface, marking and identification

IEC 60076 Power Transformers

IEC 60079 Parts 1-14 Electrical Installations in Hazardous Areas

IEC 60085 Electrical insulation

IEC 60086 Primary batteries

IEC 60086-3 Watch batteries

IEC 60094 Magnetic tape sound recording and reproducing systems

IEC 60094-5 Electrical magnetic tape properties

IEC 60094-6 Reel-to-reel systems

IEC 60094-7 Cassette for commercial tape records and domestic use

IEC 60096 Radio-frequency cables

IEC 60098 Rumble measurement on Vinyl Disc Turntables

IEC 60099-4 Metal oxide Surge arresters without gaps for AC systems

IEC 60099-5 Selection and Application Recommendations

IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices

IEC 60137 Bushings for alternating voltages above 1000V

IEC 60146 Semiconductor Converters

IEC 60169 Radio-frequency connectors

List of IEC standards - Wikipedia, the free encyclopedia file:///C:/DOCUME~1/Monzur/LOCALS~1/Temp/Temporary Directory 1...

1 of 13 11/28/2011 1:59 PM

IEC 60169-2 unmatched coaxial connector (Belling-Lee TV Aerial Plug)

IEC 60169-8 BNC connector, 50 ohm

IEC 60169-9 SMC connector, 50 ohm

IEC 60169-10 SMB connector, 50 ohm

IEC 60169-15 SMA connector, 50 ohm

IEC 60169-16 N connector, 50 ohm or 75 ohm

IEC 60169-16 TNC connector, 50 ohm

IEC 60169-24 F connector, 75 ohm

IEC 60179 Replaced by IEC 60651 Replaced by IEC 61672-1 Ed.1.0 (2002) Sound Level Meters

IEC 60183 Guide to the selection of high voltage cables

IEC 60204 Safety of machinery

IEC 60214 On-load tap changers

IEC 60228 Conductors of insulated cables

IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment

IEC 60238 Edison screw lampholders

IEC 60245 Rubber-Insulated Cables

IEC 60255 Electrical Relays

IEC 60268 Sound system equipment

IEC 60268-1 General

IEC 60268-2 Explanation of general terms and calculation methods

IEC 60268-3 Amplifiers

IEC 60268-4 Microphones

IEC 60268-5 Loudspeakers

IEC 60268-6 Auxiliary passive elements

IEC 60268-7 Headphones and earphones

IEC 60268-8 Automatic gain control devices

IEC 60268-9 Artificial reverberation, time delay and frequency shift equipment

IEC 60268-10 Peak programme level meters

IEC 60268-11 Application of connectors for the interconnection of sound system components

IEC 60268-12 Application of connectors for broadcast and similar use

IEC 60268-13 Listening tests on loudspeakers

IEC 60268-14 Circular and elliptical loudspeakers; outer frame diameters and mounting

dimensions

IEC 60268-16 Objective rating of speech intelligibility by speech transmission index

IEC 60268-17 Standard volume indicators

IEC 60268-18 Peak programme level meters - Digital audio peak level meter

IEC 60269 Low voltage fuses

IEC 60269-1 General requirements

IEC 60269-2 Supplementary requirements for fuses for use by authorized persons (fuses mainly

for industrial application)

IEC 60269-3 Supplementary requirements for fuses for use by unskilled persons (fuses mainly for

household and similar applications)

IEC 60269-4 Supplementary requirements for fuse-links for the protection of semiconductor

devices

IEC 60270 High-Voltage Test Techniques - Partial Discharge Measurements

IEC 60287 Calculation of permissible current in cables at steady state rating

IEC 60296 Mineral Insulating oils for transformers & switchgear

IEC 60297 19-inch rack

IEC 60309 Plugs, socket-outlets and couplers for industrial purposes

IEC 60317 Specifications for particular types of winding wires

IEC 60320 Appliance couplers for household and similar general purposes (IEC connector)


2 of 13 11/28/2011 1:59 PM

IEC 60331 Tests for Electric Cables under Fire Conditions

IEC 60335-1 Safety of electrical household appliances; Part 1

IEC 60335-2-2 Safety of Household and similar elecrical appliances; Part 2-2: Particular

requirements for Vacuum Cleaners and Water-suction Cleaning Appliances

IEC 60335-2-3 Safety of Household and similar elecrical appliances; Part 2-3: Particular

requirements for Electric Irons

IEC 60335-2-5 Safety of Household and similar electrical appliances; Part 2-5: Particular

requirements for dishwashers


Requirements for Stationary Cooking Ranges, Hobs, Ovens and Similar Appliances


Requirements for Washing Machines


requirements for Shavers, Hair Clippers and similar appliances


requirements for Grills, Toasters and similar portable cooking appliances


requirements for Floor Treatment Machines and Wet Scrubbing Machines


Requirements for Tumbler Dyers


requirements for Warming Plates and similar appliances


requirements for Deep Fat Fryers, Frying Pans and similar appliances


requirements for Kitchen Machines


requirements for Appliances for Heating Liquids


requirements for Food Waste Disposers


requirements for Blankets, Pads, Clothing and similar flexible heating appliances


Requirements for Storage Water Heaters


Requirements for Appliances for Skin or Hair Care


Requirements for refrigerating appliances, ice-cream appliances and ice makers


Requirements for Microwave Ovens


requirements for Battery Chargers


requirements for Room Heaters


Requirements for Massage Appliances


Requirements for Instantaneous Water Heaters


Requirements for Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements



3 of 13 11/28/2011 1:59 PM

Requirements for Commercial Electrical Deep Fat Fryers


Requirements for Commercial Electrical Griddles and Griddle Grills


Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers


Requirements for Pumps for liquids having a temperature not exceeding 35 degrees C


Requirements for Commercial Electric Forced Convection Ovens, Steam Cookers and Steam-

Convection Ovens


Requirements for Clothes Dryers and Towel Rails


Requirements for Ironers


Requirements for Portable Heating Tools and Similar Appliances


Requirements for Commercial Electric Boiling Pans


Requirements for Commercial Electric Grillers and Toasters


Requirements for Commercial Electric Hot Cupboards


Requirements for Stationary Circulation Pumps for Heating and Service Water Installations


Requirements for Oral Hygiene Appliances


Requirements for Surface-Cleaning Appliances Employing Liquids


Requirements for Projectors and Similar Appliances


Requirements for Commercial Electric Dishwashing Machines


Requirements for Commercial Electric Rinsing Sinks


Requirements for Commercial Electric Kitchen Machines


Requirements for Floor Treatment and Floor Cleaning Machines, for Industrial and Commercial

Use


Requirements for Spray Extraction Appliances, for Industrial and Commercial Use


Requirements for Wet and Dry Vacuum Cleaners, Including Power Brush, for Industrial and

Commercial Use


Requirements for Portable Immersion Heaters


Requirements for Commercial Refrigerating Appliances with an incorporated or remote

refrigerant condensing unit or compressor


Requirements for Commercial Microwave Ovens


4 of 13 11/28/2011 1:59 PM

IEC 60364 Electrical installations of buildings

IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing

equipment

IEC 60417-1 Graphical symbols for use on equipment; Part 1: Overview and Application

IEC 60439 Low voltage switchgear and controlgear assemblies; Part 1: Type-Tested and partially type

tested assemblies

IEC 60445 Basic and safety principles for man-machine interface

IEC 60446 Wiring colours

IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1KV up

to 30KV

IEC 60529 Degrees of protection provided by enclosures (IP Code)

IEC 60571 Electronic equipment used on rail vehicles

IEC 60574 Audio-visual, video and television equipment and systems

IEC 60598-1 Luminaires: General Requirements

IEC 60559: 1989 Binary floating-point arithmetic for microprocessor systems (equivalent to IEEE

754-1989)

IEC 60694 Common clauses for high-voltage switchgear and control gear standards

IEC 60601-1 Medical Electrical Equipment; Part 1: General Requirements for Safety.

IEC 60601-1-1 Medical electrical equipment; Part 1-1: General requirements for safety -

Collateral standard: Safety requirements for medical electrical system.

IEC 60601-1-2 Medical electrical equipment; Part 1-2 : General requirements for safety - Section

2: Collateral standard: Electromagnetic compatibility - Requirements and tests.

IEC 60601-1-4 Medical Electrical Equipment; Part 1-4: General Requirements for Safety -

Collateral Standard. Programmable Electrical Medical Systems.

IEC 60601-1-8 Medical Electrical Equipment; Part 1-8: General Requirements for Safety -

Collateral Standard: General requirements, tests and guidance for alarm systems in medical

electrical equipment and medical electrical systems

IEC 60601-1-9 Medical electrical equipment; Part 1-9: General requirements for basic safety and

essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-10 Medical electrical equipment; Part 1-10: General requirements for basic safety

and essential performance - Collateral Standard: Requirements for the development of

physiologic closed-loop controllers

IEC 60601-2-33 Medical electrical equipment; Part 2-33: Particular requirements for basic safety

and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-37 Medical electrical equipment; Part 2-37: Particular requirements for the basic

safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards

IEC 60603-2: Detail specification for two-part connectors with assessed quality, for printed

boards, for basic grid of 2.54 mm (0.1 in) with common mounting features

IEC 60603-7-1: Connectors for electronic equipment; Part 7-1: Detail specification for 8-way,

shielded free and fixed connectors with common mating features, with assessed quality


unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz


unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz


shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz


shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz

IEC 60617 Graphical symbols for diagrams

IEC 60617-12 Graphical symbols for diagrams; Part 12: Binary logic elements (Logic gates)


5 of 13 11/28/2011 1:59 PM

IEC 60651 Sound level meters (status is withdrawn)

IEC 60694 High-voltage switchgear. Common specifications

IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for

mechanical support of electrical devices in switchgear and controlgear installations.

IEC 60721 Classification of environmental conditions

IEC 60726 Dry type power transformers

IEC 60747 Semiconductor devices; Part 1: General

IEC 60747-2 Discrete semiconductor devices and integrated circuits; Part 2: Rectifier Diodes

IEC 60747-4 Discrete semiconductor devices; Part 4: Microwave diodes and transistors

IEC 60747-5-4 Discrete semiconductor devices; Part 5-4: Optoelectronic devices Semiconductor

lasers

IEC 60747-6 Discrete semiconductor devices; Part 6: Thyristors

IEC 60747-7 Discrete semiconductor devices; Part 7: Bipolar transistors

IEC 60747-7-5 Discrete semiconductor devices; Part 7: Bipolar transistors for power switching

applications

IEC 60747-8 Discrete semiconductor devices; Part 8: Field-effect transistors

IEC 60747-8-4 Discrete semiconductor devices; Part 8-4: Metal-oxide-semiconductor field-

effect transistors (MOSFETs) for power switching applications

IEC 60747-9 Discrete semiconductor devices; Part 9: Insulated-gate bipolar transistors (IGBTs)

IEC 60747-12-1 Discrete semiconductor devices; Part 12-1: Optoelectronic devices - Blank

detail specification for light emitting infrared emitting diodes with/without pigtail for fibre optic

systems and sub-systems

IEC 60747-12-3 Discrete semiconductor devices; Part 12-3: Optoelectronic Devices - Blank

detail specification for Light-Emitting Diodes (LEDs) for display applications

IEC 60748 Semiconductor devices - integrated circuits

IEC 60774 VHS/S-VHS video tape cassette system

IEC 60793 Optical fibres

IEC 60825 Laser safety

IEC 60812 - International Standard on Fault Mode and Effects Analysis

IEC 60870 Telecontrol equipment and systems

IEC 60870-1 General considerations

IEC 60870-2 Operating conditions

IEC 60870-3 Interfaces (electrical characteristics)

IEC 60870-4 Performance requirements

IEC 60870-5 Transmission protocols

IEC 60870-5-101 Companion standard for basic telecontrol tasks

IEC 60870-5-102 Companion standard for the transmission of integrated totals in electric

power systems

IEC 60870-5-103 Companion standard for the informative interface of protection

equipment

IEC 60870-5-104 Network access for IEC 60870-5-101 using standard transport profiles

IEC 60870-6 Telecontrol protocols compatible with ISO and ITU-T recommendations

IEC 60874 Connectors for optical fibres

IEC 60884 Plugs and socket-outlets for household and similar purposes

Defines general requirements of such plugs and sockets. The many particular forms used in

different countries are listed in IEC/TR 60083 (formerly IECEE CEE-7).

IEC 60898-1 Electrical accessories. Circuit breakers for overcurrent protection for household and

similar installations. Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified)

IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes


6 of 13 11/28/2011 1:59 PM

IEC 60906-1: Plugs and socket-outlets 16 A 250 V AC

This is the system the IEC recommends as the worldwide standard for countries using

220-240 V AC. Switzerland uses already a very similar plug.

IEC 60906-2: Plugs and socket-outlets 15 A 125 V AC

This is the system used in the United States, Canada, and Japan.

IEC 60906-3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, AC and DC

IEC 60908 Compact disk digital audio system

IEC 60921 Ballasts for tubular fluorescent lamps - Performance requirements

IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

IEC 60942 Electroacoustics - Sound calibrators

IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General

Requirements - Methods of Testing and Required Test Results

IEC 60947 Standards for low-voltage switchgear and controlgear

IEC 60950 Safety of information technology equipment

IEC 61000 Electromagnetic compatibility (EMC)

IEC 61000-2-1: Guide to electromagnetic environment for low-frequency conducted

disturbances and signalling in public power supply systems

IEC-61000-2-2: Environment - Compatibility Levels for Low-Frequency Conducted

Disturbances and Signalling in Public Low-Voltage Power Supply Systems

IEC-61000-2-3: Environment - Description of the environment - Radiated and non-network-

frequency-related conducted phenomena

IEC-61000-2-4: Environment - Compatibility levels in industrial plants for low-frequency

conducted disturbances

IEC-61000-2-5: Environment - Classification of electromagnetic environments. Basic EMC

publication

IEC-61000-2-6: Environment - Assessment of the emission levels in the power supply of

industrial plants as regards low-frequency conducted disturbances

IEC 61000-2-7: Environment - Low frequency magnetic fields in various environments

IEC-61000-2-8: Environment - Voltage dips and short interruptions on public electric power

supply systems with statistical measurement results

IEC 61000-2-9: Environment - Description of HEMP environment. Radiated disturbance. Basic

EMC publication

IEC 61000-2-10: Environment - Description of HEMP environment. Conducted disturbance

IEC 61000-3-2: Limits - Limits for harmonic current emissions (equipment input current up to

and including 16 A per phase)

IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public

low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to

conditional connection

IEC 61000-3-4: Limits - Limitation of emission of harmonic currents in low-voltage power

supply systems for equipment with rated current greater than 16 A

IEC 61000-3-6: Limits - Assessment of emission limits for distorting loads in MV and HV power

systems

IEC 61000-3-7: Limits - Assessment of emission limits for fluctuating loads in MV and HV power

systems

IEC 61000-3-8: Limits - Guide to signalling on low-voltage electrical installations. Emission

levels, frequency bands and electromagnetic disturbance levels

IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public

low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to

conditional connection

IEC 61000-4-1: Testing and measurement techniques - Overview of IEC 61000-4 series

IEC 61000-4-2: Testing and measurement techniques - Electrostatic discharge immunity tests.


7 of 13 11/28/2011 1:59 PM

Basic EMC publication

IEC 61000-4-3: Testing and measurement techniques - Radiated, radio-frequency,

electromagnetic field immunity test

IEC 61000-4-4: Testing and measurement techniques - Electrical fast transient/burst immunity

test. Basic EMC publication

IEC 61000-4-5: Testing and measurement techniques - Surge immunity test

IEC 61000-4-6: Testing and measurement techniques - Immunity to conducted disturbances,

induced by radio-frequency fields

IEC 61000-4-7: Testing and measurement techniques - General guide on harmonics and

interharmonics measurements and instrumentation, for power supply systems and equipment

connected thereto

IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity

test. Basic EMC publication

IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test. Basic

EMC publication

IEC 61000-4-10: Testing and measurement techniques - Damped oscillatory magnetic field

immunity test. Basic EMC publication

IEC 61000-4-11: Testing and measurement techniques Voltage dips, short interruptions and

voltage variations immunity tests. Basic EMC publication

IEC 61000-4-12: Testing and measurement techniques - Oscillatory waves immunity test. Basic

EMC publication

IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including

mains signalling at A.C. power port, low frequency immunity tests

IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test

IEC 61000-4-15: Testing and measurement techniques - Flickermeter. Functional and design

specifications. Basic EMC publication

IEC 61000-4-16: Testing and measurement techniques - Test for immunity to conducted,

common mode disturbances in the frequency range 0 Hz to 150 kHz

IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port

immunity test

IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for

HEMP and other radiated disturbances

IEC 61000-4-24: Testing and measurement techniques - Test methods for protective devices for

HEMP conducted disturbance. Basic EMC publication

IEC 61000-4-25: Testing and measurement techniques - HEMP immunity test methods for

equipment and systems

IEC 61000-4-27: Testing and measurement techniques - Unbalance, immunity test

IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity

test

IEC 61000-4-29: Testing and measurement techniques - Testing and measurement techniques.

Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

IEC 61000-4-30: Testing and measurement techniques - Power quality measurement methods

IEC 61000-5-1: Installation and mitigation guidelines - General considerations. Basic EMC

publication

IEC 61000-5-2: Installation and mitigation guidelines - Earthing and cabling

IEC 61000-5-5: Installation and mitigation guidelines - Specification of protective devices for

HEMP conducted disturbance. Basic EMC publication

IEC 61000-5-7: Installation and mitigation guidelines - Degrees of protection provided by

enclosures against electromagnetic disturbances (EM code)

IEC 61000-6-1:Generic standard -EMC - Susceptibility - Residential, Commercial and Light

industry


8 of 13 11/28/2011 1:59 PM

IEC 61000-6-2: Generic standard - EMC - Susceptibility - Industrial

IEC 61000-6-3: Generic standard - EMC - Emissions - Residential,Commercial and Light

industry

IEC 61000-6-4: Generic standard - EMC - Emissions - Industry

IEC 61000-6-6: Generic standards - HEMP immunity for indoor equipment

IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for

household and similar uses (RCBO's)

IEC 61010-1: Safety requirements for electrical equipment for measurement, control and laboratory

use, Part 1 general requirements.

IEC 61010-2-010 Part 2-010: Particular requirements for laboratory equipment for the heating of

materials

IEC 61010-2-020 Part 2-020: Particular requirements for laboratory centrifuges

IEC 61010-2-032 Part 2-032: Particular requirements for hand-held and hand-manipulated

current sensors for electrical test and measurement

IEC 61010-2-040 Part 2-040: Particular requirements for sterilizers and washer-disinfectors used

to treat medical materials

IEC 61010-2-051 Part 2-051: Particular requirements for laboratory equipment for mixing and

stirring

IEC 61010-2-061 Part 2-061: Particular requirements for laboratory atomic spectrometers with

thermal atomization and ionization

IEC 61010-2-081 Part 2-081: Particular requirements for automatic and semi-automatic

laboratory equipment for analysis and other purposes

IEC 61010-2-081am1 Part 2-081: Particular requirements for automatic and semi-automatic

laboratory equipment for analysis and other purposes

IEC 61010-2-101 Part 2-101 Particular requirements for in vitro diagnostic (IVD) medical

equipment.

IEC 61043 Sound intensity meters with pairs of microphones

IEC 61058-1 Switches for Appliances - Part 1: General Requirements

IEC 61058-2-1: Particular requirements for cord switches

IEC 61058-2-4: Particular requirements for independently mounted switches

IEC 61097 Global maritime distress and safety system (GMDSS)

IEC 61097-6 Narrowband direct-printing telegraph equipment for the reception of navigational

and meteorological warnings and urgent information to ships (NAVTEX)

IEC 61131 PLC programming.

IEC 61131-3 defining PLC programming languages.

IEC 61149 Safety of mobile radios

IEC 61158 Industrial communication networks - Fieldbus specifications

IEC 61158-1 Industrial communication networks - Fieldbus specifications - Part 1: Overview and

guidance for the IEC 61158 and IEC 61784 series

IEC 61158-2 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer

specification and service definition

IEC 61158-3 Industrial communication networks - Fieldbus specifications - Part 3: Data-link

layer service definition

IEC 61158-4 Industrial communication networks - Fieldbus specifications - Part 4: Data-link

layer protocol specification

IEC 61158-5 Industrial communication networks - Fieldbus specifications - Part 5: Application

layer service definition

IEC 61158-6 Industrial communication networks - Fieldbus specifications - Part 6: Application

layer protocol specification

IEC 61162 Maritime navigation and radiocommunication equipment and systems

IEC 61162-1 Single talker and multiple listeners


9 of 13 11/28/2011 1:59 PM

IEC 61162-2 Single talker and multiple listeners, high-speed transmission

IEC 61162-3 Multiple talkers and multiple listeners, CAN Buss technology

IEC 61162-4 Multiple talkers and multiple listeners

IEC 61162-400 Ship systems interconnection - Introduction and general principles

IEC 61162-401 Ship systems interconnection - Application profile

IEC 61162-410 Ship systems interconnection - Transport profile requirements and basic

transport profile

IEC 61162-420 Ship systems interconnection - Companion standard requirements and

basic companion standards

IEC 61280 Field testing method for measuring single mode fibre optic cable

IEC 61286 Character set with electrotechnical symbols (ISO-IR 181 [1] )

IEC 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements

IEC 61346 Industrial systems, installations and equipment and industrial products — Structuring

principles and reference designations

IEC 61355 Classification and designation of documents for plants, systems and equipment

IEC 61400 Wind turbines

61400-1: Design requirements

61400-2: Design requirements for small wind turbines

61400-3: Design requirements for offshore wind turbines

61400-11: Acoustic noise measurement techniques

61400-12: Wind turbine power performance testing

61400-12-1: Power performance measurements of electricity producing wind turbines

61400-13: Measurement of mechanical loads

61400-14: Declaration of apparent sound power level and tonality values

61400-21: Measurement and assessment of power quality characteristics of grid connected wind

turbines

61400-23: Full-scale structural testing of rotor blades

61400-24: Lightning protection

61400-25: Information and information exchange for wind power plants[2]

61400-25-1: Communications for monitoring and control of wind power plants – Overall

description of principles and models

61400-25-2: Communications for monitoring and control of wind power plants –

Information models


Information exchange models

61400-25-4: Communications for monitoring and control of wind power plants – Mapping

to communication profile


Conformance testing

IEC 61439 Low-Voltage switchgear and controlgear assemblies

IEC 61499 Function blocks

IEC 61499-1 Architecture

IEC 61499-2 Software tool requirements

IEC 61499-3 Tutorial information

IEC 61499-4 Rules for compliance profiles

IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems

IEC 61511 Functional safety - safety instrumented systems for the process industry sector

IEC 61537 Cable management - Cable tray systems and cable ladder systems

IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems

IEC 61588 Precision clock synchronization protocol for networked measurement and control systems


10 of 13 11/28/2011 1:59 PM

IEC 61603 Infrared transmission of audio or video signals

IEC 61643 Surge protective devices connected to low-voltage power distribution systems

IEC 61690 Electronic design interchange format, EDIF

IEC 61690-1 Version 3 0 0

IEC 61690-2 Version 4 0 0

IEC 61784 Industrial communication networks - Profiles

IEC 61784-1 Industrial communication networks - Profiles - Part 1: Fieldbus profiles

IEC 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles

for real-time networks based on ISO/IEC 8802-3

IEC 61784-3 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses

IEC 61784-5 Industrial communication networks - Profiles - Part 5: Installation of fieldbuses

IEC 61800 Adjustable speed electrical power drive systems

IEC 61850 Communication Networks and Systems in Substations

IEC 61966 Multimedia systems -- Colour measurement

IEC 61966-2-1 sRGB default RGB colour space

IEC 61966-2-4 xvYCC, the extended-gamut YCC colour space

IEC 61968 Application integration at electric utilities – System interfaces for distribution management

IEC 61970 Application integration at electric utilities – Energy management system application

program interface (EMS-API)

IEC 61993 Maritime navigation and radiocommunication equipment and systems.

IEC 62040 Uninterruptible power systems

IEC 62040-1 General and safety requirements for UPS used in operator access areas

IEC 62040-2 Electromagnetic compatibility (EMC) requirements

IEC 62040-3 Method of Specifying the Performance and Test Requirements

IEC 62056 DLM/COSEM communication protocol for reading utility meters

IEC 62196 Plugs and sockets for charging electric vehicles

IEC 62264 Enterprise-control system integration

IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external

mechanical impacts (IK code)

IEC 62270 Hydroelectric power plant automation - Guide for computer-based control

IEC 62271 Standards for high-voltage switchgear and controlgear

IEC 62271-100 High-voltage alternating current circuit breakers

IEC 62271-102 Alternating current disconnectors and earthing switches

IEC 62271-107 AC Fuse Switches 1-52kV

IEC 62271-200 AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and

up to and including 52 kV

IEC 62271-203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above

IEC 62278 Railway applications – Specification and demonstration of reliability, availability,

maintainability and safety (RAMS)

IEC 62282-2 Fuel cell technologies - Part 2: Fuel cell modules

IEC 62282-3-1 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety

IEC 62282-3-2 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test

methods

IEC 62282-3-3 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation

IEC 62282-5-1 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

IEC 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test

methods

IEC 62301 Household electrical appliances - Measurement of standby power

IEC 62304 Medical Device Software - Software Life Cycle Processes

IEC 62325 Standards related to energy market models & communications

IEC 62351 Power System Control and Associated Communications - Data and Communication


11 of 13 11/28/2011 1:59 PM

Views

Article

Discussion

Edit this page

History

Personal tools

Try Beta

Log in / create account

Navigation

Main page

Contents

Featured content

v • d • e

Security

IEC 62379-1: Common control interface for networked digital audio and video products-General

IEC 62443 Industrial communication networks - Network and system security (DRAFT)

IEC 62443-1 Terminology, concepts and models

IEC 62443-2 Establishing an industrial automation and control system security program

IEC 62443-3 Operating a manufacturing and control systems security program

IEC 62443-4 Specific security requirements for manufacturing and control systems

IEC 62443-5 Security technologies for industrial automation and control systems

IEC 62464

IEC 62464-1 Magnetic resonance equipment for medical imaging - Part 1: Determination of

essential image quality parameters

[edit] See also

List of ISO standards — covers also standards jointly published by ISO and IEC

List of IEC Technical Committees

[edit] References

^ http://www.iec.ch/webstore/custserv/faqs/faqs_about.htm#111.

^ IEC618502.

[edit] External links

Search IEC catalogue

[show] ISO Standards

Retrieved from "http://en.wikipedia.org/wiki/List_of_IEC_standards"

Categories: IEC standards

Hidden categories: Incomplete lists


12 of 13 11/28/2011 1:59 PM

Current events

Random article

Search

Interaction

About Wikipedia

Community portal

Recent changes

Contact Wikipedia

Donate to Wikipedia

Help

Toolbox

What links here

Related changes

Upload file

Special pages

Printable version

Permanent link

Cite this page

Languages

Português

Powered by MediaWiki

Wikimedia Foundation

This page was last modified on 11 February 2010 at 11:35.

Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may

apply. See Terms of Use for details.

Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

Contact us

Privacy policy

About Wikipedia

Disclaimers


13 of 13 11/28/2011 1:59 PM

Date post:	24-Oct-2014
Category:	Documents
Upload:	mahananda-saharia
View:	352 times
Download:	16 times

List of IEC Standards

Documents