AUCTIONLIVE ON-SITE& WEBCAST

Tuesday, May 5th, 2009Beginning at 10:00am EDT7000 Fly Road, East Syracuse, NY 13057Preview: Monday, May 4th, 2009, 9:00am to 4:00pm EDT

WEBCASTCan’t attend the auction in person?Bid live online at www.BIDITUP.com

HEADERS & MULTI-DIEWIRE DRAWERSTHREAD ROLLERSPINCH POINTERWIRE STRAIGHTENING &CUT-OFF MACHINESBUTT WELDERSMATERIAL HANDLINGHYDRAULIC PRESSESMAXIPRESSSTRAIGHT SIDE PRESSO.B.I. PRESSESSHOP & ARBOR PRESSESSHOP BUILT MACHINESPRODUCTION MACHINESSHAVING MACHINES

INDUCTION HEATERLATHESHORIZONTAL MILLVERTICAL MILLSSECOND OPERATION LATHESHAPERD.E. GRINDERS / BUFFERSSURFACE GRINDERSTOOL & CUTTER GRINDERSDRILLSTAPPERBELT SANDERSSHEARBOX & PAN BRAKEPUNCHARC WELDERS

INSPECTION & MEASURINGSCALESSAWSBLAST CABINETDUST & MIST COLLECTORSPARTS WASHINGAIR COMPRESSORS & DRYERSTRUCKSFLOOR WASHERFORKLIFTSMANLIFTMATERIAL HANDLINGMISCELLANEOUS MACHINERYAND EQUIPMENTOFFICE FURNITURE & EQUIPMENT

NATIONAL S-3 4 DIE BOLT MAKER ASAHI-OKUMA 2 DIE 3 BLOW COLD HEADER 1/2” WATERBURY #33 DSOD

Plant Closed

EXCEPTIONAL ROD HEADING AND COLD FORMING FACILITYManufacturer of Special Multi Die Cold Formed and Long Headed Parts

BIDITUP WORLDWIDE: www.biditup.com

2007 2008

– 2 – TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034

COLD FORMERS • HEADERS • BOLT MAKERS

1” NATIONAL 1000-6 5 DIE COLD FORMER, 5” max. die kickout, 70 PPM, NutFormer Transfer, S/N 38907, RB 2005 – Located in Dayton, OH call for appt. to inspect3/4” NATIONAL 750 6 DIE 7 STATION COLD FORMER, 4” kickout, up to 70 PPM,universal transfer, TKO, with double-reel decoiler, S/N 38418, RB 1995 – Located inDayton, OH call for appt. to inspect5/8” NATIONAL MODEL 625 5 DIE PARTS FORMER, 3” kickout, 70 PPM TKO,Universal Transfer, Brankamp load monitor, parts and chip conveyors, S/N 38178, recently RB1/2” ASAHI-OKUMA ORH-120 2 DIE 3 BLOW COLD HEADER, 4” cutoff length,up to 100 PPM, Straightener attachment, S/N 0014-173142, new 1973, RB 20081/2” NATIONAL S-3 4 DIE BOLTMAKER with thread roller and pointer, Straightenerattachment, 5” UH, 80 - 100 PPM, magnetic conveyors, S/N 28658, RB 2007 by National3/8” NATIONAL 56 2 DIE 3 BLOW COLD HEADER, 75 mm cutoff length, 150 PPM,(2 available), S/N 40886, 40852 – Located in Rockford, IL, call for appt. to inspect

3/8” NATIONAL S-2 BOLTMAKER 4 die, 3-1/2” under head, 100 PPM, TKO,S/N 29924, Located in Rockford, IL, call for appt. to inspect3/8” NATIONAL 6L-4 HIGH SPEED 4 DIE BOLTMAKER, 3-1/8” under head,220 PPM, TKO, S/N 43408 – Located in Rockford, IL, call for appt. to inspect3/8” NAKASHIMADA EXTRA LONG STROKE DSSD, MODEL NS-80L, 8” UH,9 ½” cut-off, 30 to 80 PPM, Straightener attachment, S/N 990030, new 1999,“like new” condition1/4” NATIONAL 4 DIE BOLTMAKER, 2-1/2” UH, 125 PPM, S/N 27324 –Located in Rockford, IL , call for appt. to inspect1/4” NATIONAL 4 DIE BOLTMAKER, 2-1/2” UH, with thread rolling station,Straightener attachment, 100 PPM, AC variable speed drive, S/N 23154

(11) COLD FORMERS, HEADERS & BOLT MAKERS

1" NATIONAL MODEL 1000-6 COLD FORMER

3/4” NATIONAL 750 6 DIE 7 STATION COLD FORMER

3/8” NATIONAL 56 2 DIE 3 BLOW COLD HEADER 3/8” NATIONAL S-2 BOLTMAKER

VIEWS OF 3/8” NAKASHIMADA EXTRA LONG STROKE DSSD5/8” NATIONAL MODEL 625 5 DIE PARTS FORMER

1/4” NATIONAL 4 DIE BOLTMAKER 1/4” NATIONAL BOLTMAKER

3/8” NATIONAL 6L-4 4 DIEBOLTMAKER

1/2” ASAHI-OKUMA 2 DIE 3 BLOW COLD HEADER

2004

2008

1/2” NATIONAL S-3 4 DIE BOLT MAKER

1999

2007

ROD HEADERS • WIRE DRAWERS • THREAD ROLLERS

– 3 –Register at www.BIDITUP.com and receive auction updates via email

(2) 1/2” X 82” WATERBURY FARREL #33, DSOD FACTORY BUILT ROD HEADERS,double flywheel, 25 HP, vari-speed1/2” X 92” WATERBURY FARREL #33 DSOD FACTORY BUILT ROD HEADER,double flywheel, 40 PPM, 30 HP vari-speed, rebuilt by FTM Rebuilders 20011/2" X 63" WATERBURY #33 DSOD FACTORY BUILT ROD HEADER, 20 HP,Double Fly Wheel, S/N 167533-9

3/8" X 48" WATERBURY DSOD FACTORY BUILT, MAGAZINE FEED ROD HEADER3/16” X 36” MANVILLE DSOD MAGAZINE FEED ROD HEADER, .030" - .187" wirediameter, 36" rod lengthINDUCTION HEATER5/8” 23.5 KVA CYCLE-DYNE INDUCTION HEATER, Mdl. B-100, S/N A-1091780 (photo below)

(6) ROD HEADERS

1-1/2” KINE-ROLLER MC-4-F THREAD ROLLER, infeed/thru feed, 1 mm – 40 mmdiameter, 2 ½” thread length, S/N 6731/2” X 12” VIDEX VA-20-S DUAL DIE POCKET PLANETARY THREAD ROLLER(for T-bolts), 400 PPM, with 30” vibratory bowl feeder for T-Bolts, and 36” VibratoryBowl for long headed parts1/2” X 6” HARTFORD 20-225 THREAD ROLLER, 36” vibratory bowl feeder,20 HP, 225 PPM1/2” WATERBURY FARREL #30 FACTORY BUILT SIDE FEED THREAD ROLLER,up to 10 ft. long rods, MSC frequency drive

1/2” GREFE THREAD ROLLER with magazine side feed, capacity dia. 42” part length,S/N WDHA417/1/1974 (uses WF #30 die)3/8” GREFE THREAD ROLLER with magazine side feed, capacity 42” part length,S/N WCHSA416/1/1974 (uses WF #20 die)(3) 3/8” WATERBURY FARREL #20 THREAD ROLLERS, V-ram, adjustable pitman,horizontal hand feed, S/N 171562/1109, 136584/1037, 167729/10945/16” SHUSTER HORIZONTAL HAND FEED THREAD ROLLER, 3” Max Thread,60-120 PPM, adj. Pitman (uses #10 WF dies)

(10) THREAD ROLLERS ________________________________________________________________

1/2” WATERBURY FARREL NO. 30 THREAD ROLLER 1/2” HARTFORD 20-225 THREAD ROLLER 1/2” GREFE THREAD ROLLER

3/8” WATERBURY FARREL NO. 20THREAD ROLLERS

5/16” SHUSTER THREAD ROLLER 5/8” INDUCTION HEATER FORROD HEADER & FEED TABLE

1/2” X 12” VIDEX VA-20-S DUAL DIE POCKETPLANETARY THREAD ROLLER

RMG #89 AUTODRAWWIRE DRAWERS RMG #67 AUTODRAWWIRE DRAWERS KINEFAC MC-4-F THREAD ROLLER

1994

1 OF 3

(13) WIRE DRAWERSRMG MODEL 89-30125-70 AUTODRAW, 30 HP, 125 FPM,S/N 95073545 New 1995(4) RMG MODEL 89-30232-70 AUTODRAW WIRE DRAWERS, 30HP, 232 FPM, 36” capstan, S/N 94013179, New 1994, S/N 98021994,New 1998, S/N 94013178, New 1994, S/N 90112565, New 1990RMG MODEL 89-2071-67, 69 FPM, 20 HP, SN#92082899, New 1992(2) RMG MODEL 67-25131-76, 28" Capstan, 25 HP, 130 FPM,S/N 940133176, SN 94013177 New 1994RMG MODEL 67-30234-76, AUTODRAW, 28” capstan, 30 HP,230 FPM, S/N 93123174, 1993RMG MODEL 56-20220-20, Autodraw, 24” dia. capstan, 20 HP,220 FPM, S/N 84011067, New 1984,RMG MODEL 56-0552-87, Autodraw, 24” capstan, 5 HP, 50 FPM,S/N 99034739, New 1999RMG MODEL 45-10103-68, AUTODRAW, 10 HP, 103 FPM,SN 93123175, New 19933/4” AJAX #4 IN-LINE WIRE DRAWER FOR NATIONAL COLDFORMERS

3/8” WATERBURY FARREL 3/16” MANVILLE MAGAZINE ROD HEADER1/2” WATERBURY FARREL NO. 33 1/2” WATERBURY FARREL

2001

2 AVAILABLE

1998

1 OF 7

3 AVAILABLE

– 4 – TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034

PINCH POINTER • WIRE STRAIGHTENING & CUT-OFF MACHINES & THREAD • BUTT WELDERS • MATERIAL HANDLINGHYDRAULIC PRESSES • MAXIPRESS • STRAIGHT SIDE PRESS • O.B.I. PRESSES

PINCH POINTER1/4” WATERBURY FARREL NO.1 PINCH POINTER

(5) WIRE STRAIGHTENING & CUT-OFFMACHINES AND THREAD5/8” VIDEX VAS-25-S AUTOMATIC STRAIGHTEN & CUT,AND SINGLE-END THREADING, 65” max. rod length, 4” threadlength, 25 HP, 2 AC drives S/N 321. new 19971/2 “ VIDEX VAS-20-S AUTOMATIC STRAIGHTEN & CUT,AND SINGLE-END THREADING, 65” max. rod length, 4” threadlength, 2 AC drives, S/N 360, new 19981/2” SHUSTER 3AV WIRE STRAIGHTENER AND CUT-OFF,102” cut-off, S/N 312745/16” LEWIS 2CV WIRE STRAIGHTENER AND CUT-OFF,6ʼ cutoff length, S/N 2CV-708-61/8” SHUSTER 1V18 WIRE STRAIGHTENER AND CUT-OFF,38” Cutoff Length, S/N 1V18C 239-67

(2) BUTT WELDERSFASTENER ENGINEERS PORTABLE BUTT WELDER,capacity dia. ¼”-3/4”, Model BW-35-7, S/N 794/335MICRO-WELD STEEL ROD BUTT WELDER, capacity dia. 1-16”-1/2”,S/N 24542

MATERIAL HANDLING(2) RMG TRI-FLIPPERS, (3) 4000 LBS. COILS

LIFTING/TIP UNIT FOR PARTS LOADING

RMG POWER PAY-OFF, Model 1216-02, S/N 907140, new 1990APPROX. (12) LAZY SUSAN STYLE TURNTABLES

LARGE QUANTITIES OF PARTS CONVEYORS

36” DIA. VIBRATORY BOWL FEED

34” DIA. VIBRATORY BOWL FEED

24” DIA. VIBRATORY BOWL FEED

(2) 20” DIA. VIBRATORY BOWL FEEDS

(2) 15” DIA. VIBRATORY BOWL FEEDS

(2) 12” DIA. VIBRATORY BOWL FEEDS

(3) PENTALIFT 2500 LBS. SCISSORS LIFT TABLES w/roller conveyor500 KG. CAPACITY PARTS LOADER

500 KG. CAPACITY PARTS LOADING FLIPPER

500 LBS. CAP. PORTABLE LIFT TABLE

(3) GESSLING PARTS CONVEYORS, Mdl. Drahtboy VII/SLIVONIA MAGNETIC PARTS LOADER CONVEYOR

(2) DOUBLE REEL UNCOILERS

(2) HYDRAULIC PRESSESERIE 500 TON 4-POST HYDRAULIC UP-ACTING PRESS,bed area 20” x 20”WATSON STILLMAN 300 TON 4-PORT HYDRAULIC UP-ACTINGPRESS, bed area 16” x 16”

MAXIPRESSNATIONAL 300 TON MAXIPRESS, air clutch, auto. Lubrication,distance between frames 20”, Helm load guard control, S/N 17404

STRAIGHT SIDE PRESSARGCO 200 TON STRAIGHT SIDE DOUBLE CRANK PRESS,bed area 30” x 60”, windows 19 ½”w x 16”H, Auto.lub, air clutch,dual ram counter balance, distance between side frames 53 ½”,power parts conveyor and Datum 12 Station rotary transfer unit

(3) O.B.I. PRESSES110 TON USI CLEARING O.B.I. PRESS, single geared, air clutch,stroke 6”, shut height 18 1/8”, ram adj. 3 ½”, 40 SPM, bed 30” x 39”,air cushion, light curtains, dual palm buttons, S/N 51.119622 TON NIAGARA M22 O.B.I. PRESS, air clutch, bed 12” x 21”,stroke 2 ½”, adj. 2”, shut height 9”, speeds 30-90 SPM,dual palms, S/N 4948810 TON FEDERAL O.B.I. PRESS, air actuated clutch, Automaticfront parts feeder

VIDEX VAS-20-L X 65" WIRE STRAIGHTENER/CUT-OFF

LEWIS 2CV WIRE STRAIGHTENER/CUT-OFF SHUSTER 3AV WIRE STRAIGHTENER/CUT-OFF

SHUSTER 1V18 WIRE STRAIGHTENER/CUT-OFF FASTENER ENGINEERSBUTT WELDER

WATSON STILLMAN300 TON HYD. PRESS

RMG TRI-FLIPPERS

RMG 1216-02 POWER PAY-OFF

PARTIAL VIEW VIBRATORY BOWL FEEDS

GOESSLING PARTS LOADERS ERIE 500 TON HYDRAULIC PRESS

VIDEX VAS-25 X 65"L WIRE STRAIGHTENER/CUT-OFF

1997

1998

1 OF 2

1 OF 3

– 5 –Register at www.BIDITUP.com and receive auction updates via email

SHOP & ARBOR PRESSES • SHOP BUILT MACHINES • PRODUCTION MACHINES • SHAVING MACHINES • LATHES • MILLSSECOND OPERATION LATHE • SHAPER • D.E. GRINDERS/BUFFERS • SURFACE GRINDERS • TOOL & CUTTER GRINDERS

(3) SHOP & ARBOR PRESSES25 TON D&L HAND HYDRAULIC H-FRAME SHOP PRESSNO. 3 BENCH ARBOR PRESSGREENERD NO. 2 BENCH ARBOR PRESS

(7) SHOP BUILT MACHINES(2) CUSTOM BUILT WIRE BENDING MACHINES w/hydraulic unit(2) SHOP BUILT HORIZONTAL DRILLING, REAMINGAND FORMING MACHINES w/hydraulic unit(2) SHOP BUILT HORIZONTAL PRODUCTIONDRILLING MACHINESSPECIAL BRIDGEPORT VERTICAL MILLING MACHINE

(3) PRODUCTION MACHINESKINGSBURY 9-STATION ROTARY TRANSFER MACHINE,S/N B-12561STANDARD 3-STATION VERTICAL PRODUCTIONDRILLING MACHINEMSO-10-901 3-STATION PRODUCTION ROTARYDRILLING MACHINE

(6) SHAVING MACHINES(3) TOWA SHAVERS, MODEL T0-38, Max. shank diameter .748”,length 2.36”, 3 HP, collet type, (2) with vibratory bowl feeders,S/N 97085, 98071, 99076(3) TOWNSEND HIGH SPEED SHAVERS, up to 3/4” x 3”

(6) LATHES(3) 15” X 54”CC LEBLOND REGAL SERVO SHIFT LATHES,Spindle bore 2 ¼”, Inch/Metric threading, hard bed, 4-jaw chuck,Aloris tool post, speeds to 1800 RPM, S/N 13C-525, 11C-1440, 11C-602(2) MOTORIZED SPEED LATHES mounted on benchHERBERT HAND TURRET LATHE

HORIZONTAL MILL2M CINCINNATI UNIVERSAL MILL, No.50, table 10 ½” x 52 ¾”,Arbor Support, S/N E3971

(5) VERTICAL MILLS(2) 3 HP SUPERMAX VARIABLE SPEED VERTICAL MILLS,R-8 taper, 9” x 48” powerfeed table, Mitutoyo 2-axes D.R.O.,S/N T8210595, T8210593, New 1993(2) 2 HP SERIES I BRIDGEPORT VARIABLE SPEED VERTICALMILLS, R-8 taper, 9” x 42” power feed table, Sargon 2-axes D.R.O.,S/N 161098, 198447TREE 2UVRC VARIABLE SPEED VERTICAL MILL, 10 ½” x 42” table,speeds to 3300 RPM, Sargon 2 axes D.R.O., S/N 11033

SECOND OPERATION LATHEHARDINGE DSM-59 SUPER PRECISION SECOND OPERATIONLATHE, tailstock, collet closer, 3500 RPM, Swivel compound,3-jaw chuck, S/N 59-19796-T

SHAPER24” CINCINNATI PLAIN SHAPER w/swivel vise

(6) D.E. GRINDERS / BUFFERS6” CRAFTSMAN D.E. PEDESTAL BUFFER(4) 6” DAYTON D.E. PEDESTAL GRINDERS6” BALDOR D.E. CARBIDE PEDESTAL GRINDER

(4) SURFACE GRINDERSTHOMPSON 8” X 24” MDL. B HYDRAULIC SURFACE GRINDER,8” x 24” permanent magnetic chuck, S/N B3421HARIG 6” X 18” 618W HYDRAULIC SURFACE GRINDER,6” x 18” permanent magnetic chuck, S/N 3635-W8” X 15” BRIDGEPORT HAND FEED SURFACE GRINDER,8” x 15” permanent magnetic chuck6” X 18” K.O.LEE HAND FEED SURFACE GRINDER,6” x 18” permanent magnetic chuck

(2) TOOL & CUTTER GRINDERSBA960 K.O.LEE UNIVERSAL TOOL & CUTTER GRINDER,Motorized work head, S/N 7183-8-60SP2500 DAREX DRILL SHARPENER

ARGCO 200 TON S.S.D.C. PRESS USI CLEARING 110 TON O.B.I. PRESS

SHOP BUILT DRILLING, REAMING ANDFORMING MACHINE

KINGSBURY 9-STATION ROTARYTRANSFER MACHINE

NATIONAL 300 TONMAXIPRESS

TOWA COLD SHAVERSHARDINGE DSM-59 SUPER PRECISIONSECOND OPERATION LATHE22 TON NIAGARA

M22 O.B.I. PRESS

SPECIAL BUILT MACHINE, HEADING & BEND 15" X 54"CC LEBLOND REGALSERVO-SHIFT LATHES

22 TON NIAGARAM22 O.B.I. PRESS

VIEW OF SURFACE GRINDERSK.O.LEE BA960 TOOL &CUTTER GRINDERBRIDGEPORT VERT. MILL

1 OF 3

1 OF 2

1999

3 AVAILABLE

– 6 – TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034

DRILLS • TAPPER • BELT SANDERS • SHEAR • BOX & PAN BRAKE • PUNCH • ARC WELDERS • SCALES • SAWS • BLAST CABINETDUST & MIST COLLECTORS • PARTS WASHING • AIR COMPRESSORS & DRYERS • TRUCKS • FLOOR WASHER

(3) DRILLS15” DELTA DRILL, manual feed14” CENTRAL BENCH DRILL, manual feedMILWAUKEE PORTABLE MAGNETIC BASE DRILL

TAPPER2SP-HT-T SNOW DOUBLE END OPPOSED TAPPER,#4 size tapping heads, S/N 625-1500

(2) BELT SANDERS(2) 6” ROCKWELL DELTA COMBINATION VERTICAL BELTSANDERS, 12” Disc grinder

SHEAR3’ BLISS POWER SHEAR, Model 312

BOX & PAN BRAKE4’ X 12 GA. CHICAGO D&K BOX & PAN BRAKE, Mdl. W34,full fingers, S/N 66224

PUNCHNO. 2 DI-ACRO DEEP THROAT C-FRAME PUNCH, S/N BB5489

(2) ARC WELDERS250 AMP LINCOLN WIRE MATIC MIG WELDER200 AMP LINCOLN PORTABLE ARC WELDER

(8) SCALES(5) 10,000 LBS. CAP. 48” X 60” PLATFORM SCALESw/GSE 574 digital scale(3) 10,000 LBS. CAP. PORTABLE PLATFORM SCALESw/GSE 574 digital scales

(5) SAWSDO-ALL C-916, 9” X 16” HORIZONTAL BAND SAW, 1” blade, coolant,4ʼ roller conveyor, S/N 438-85514, new 1985GROB 18” VERTICAL BAND SAW, S/N 6831MILWAUKEE PORTABLE ELECTRIC SABRE SAWMARK V-CS600A 6” LAB CUT-OFF SAW10” MILWAUKEE BENCH CHOP SAW

BLAST CABINET24” X 36” INFA BLAST 2-HOLE CABINET w/collector, S/N 88-1430

(3) DUST & MIST COLLECTORS(2) ODR3000 ABSOLVENT OIL MIST COLLECTORS,S/N 20050547, 20050546AERCOLOGY DUST COLLECTOR

PARTS WASHINGGRAY MILLS PARTS WASHING TANK w/drumVECTOR WIP AUTOMATIC PARTS WASHING LINE,8' length capacity x 650 lb. capacity per basket, wash, rinse and2 station dryer, 3 minute cycle time ( 20 baskets per hour3-1/2 lbs. Gas Pressure, Built New 1996STEEL PARTS WASHING TANK w/roller conveyor

(6) AIR COMPRESSORS & DRYERS150 HP SULLAIR 20-150 H ROTARY SCREW,Skid mounted A/C 125 PSIG, air cooled, S/N 003-56083(2) 75 HP GARDNER DENVER ELECTRA-SAVER II ENCLOSEDROTARY SCREW AIR COMPRESSORS,air cooled, skid mounted, 120 PSI, S/N U35927, U35928SULLAIR PS700 PURE-AIRE REFRIGERANT AIR DRYERGARDNER DENVER RDS650A-4 REFRIGERANT AIR DRYER

(2) TRUCKS1992 FORD L8000 DIESEL BOX TRUCK, 24ʼ box,S/N 1FDXR82A4NVA163622000 FE-SP MITSUBISHI FUSO BOX TRUCK, 12ʼL, Automatic,S/N JW6BBE1H2YL005053

FLOOR WASHERTENNANT 5700 WALK BEHIND ELECTRIC FLOOR WASHERw/charger

SNOW 2SP-HT-4 DOUBLE END OPPOSED TAPPER 4' CHICAGO D&K BOX & PAN BRAKE

DO-ALL C-916 HORIZONTAL BAND SAW GROB 18" VERTICAL BAND SAW

INFA BLAST 2-HOLE BLAST CABINET ABSOLENT OIL MIST COLLECTORS

VECTOR PARTS WASHING LINE PARTS WASHER

150 HP SULLAIR AIR COMPRESSOR GARDNER DENVER AIR DRYER

1985

1 OF 2

– 7 –Register at www.BIDITUP.com and receive auction updates via email

FORKLIFTS • MANLIFT • MATERIAL HANDLING • MISCELLANEOUS MACHINERY AND EQUIPMENTINSPECTION & MEASURING • NEW TOOLING • OFFICE FURNITURE & EQUIPMENT

(5) FORKLIFTS5000 LBS. CROWN ELECTRIC RIDING FORKLIFTS, side shift attach3000 LBS. MITSUBISHI ELECTRIC RIDING FORKLIFT, Mdl. FBC15, S/N AFB1-50102(2) 3000 LBS. YALE ELECTRIC RIDING FORKLIFTS, side shift attach., 189” ht.,S/N B807N03217V, B807N03215V(2) 2400 LBS. NICHIYU ELEC. RIDING PICKERS, 185” ht., S/N 131930494, 131930692

MANLIFT1000 LBS. CAP. PORTABLE ELECTRIC SCISSORS MANLIFT

MATERIAL HANDLING(3) 4,000 LBS. PALLET JACKSMDL. 5000 PORTABLE SHOP CRANE2 TON PORTABLE A-FRAME GANTRY CRANE w/2 Ton Chain fall3 TON HUSKY FLOOR JACK

MISCELLANEOUS MACHINERY & EQUIPMENT40A RIDGID portable pipe threading stand, (8) Portable dump type scraphoppers, (3) FERRO Five FR Series battery chargers, (2) DEKA 24 cell batterychargers, (2) FER 100 battery chargers, 1400 ELECTROMARK Electric Etcher,12 gal. portable shop vac, L-W Demag unit, 12” Dia. manual rotary table,10” Dividing head w/tailstock, RUBBERMAID portable tool chest, IFC HNSIICetrifrige, PRECISION Electric lab oven, KENNEDY 10 drawer tool cabinetw/wooden top, 42” x 60” steel welding table, 36” x 120” steel welding table,Oxygen / Acetylene portable burning cart, 24” TECUMSEH Snow Blower, 8 HP,FLOW RITE SNAP-FILL portable battery refill system, (5) Heavy Duty Horizontaldrilling heads, (4) Wire straightening stands, Motorized tumbling machine,Detachable fork lift boom, Fork extensions, Forklift Maintenance platform,(4) Portable steel banding carts, (3) Cardboard Box Stapler Machines, DUOFAST pneumatic stapler, COMO 130 portable filtration system, S/N 3433,(2) RIDGID portable Shop Vac’s, Paint stripe Machine

DIRECTIONSFrom SYR (Syracuse Hancock International Airport)I-481 take exit 298W, then turn right on Fly Road, plant on right.Watch for Auction Signs.

LODGINGDOUBLETREE HOTEL SYRACUSE6301 State Route 298East Syracuse, NYPhone: (315) 432-0200

HILTON GARDEN INN6004 Fair Lakes RoadEast Syracuse, NYPhone: (315) 431-4800

INSPECTION & MEASURINGMECTRON LASER INSPECTION MACHINE w/vibratory bowl feed, roller conveyors,Direct to Carton System, S/N Q-2500-8SATEC INSTRON TENSILE TESTER, 300 KN, Model 5500-60TVL-F1, PC & printer,Mechanical test equipment, S/N 60TVLP4326, new 200114” DELTRONIC OPTICAL COMPARATOR w/Quadrachek II 2-axes D.R.O.,Model DH14-MPC, S/N A080665514” DELTRONIC OPTICAL COMPARATOR S/MPC-5, 2-axes D.R.O., typeDH214-MPC5E, S/N 2690344814TT ROCKWELL/WILSON HARDNESS TESTER, B&C Scale, S/N 3020/28324” X 24” STARRETT PINK GRANITE SURFACE PLATE w/stand, grade A96”L BROOK DIGITAL LENGTH GAUGE w/Sony 1 axis D.R.O., S/N BA1192-1ALSO INCLUDING: (18) Sets of VERMONT pin gages, Verniers, height checks,ht. gages, calipers, O.D. Mikes, ID Mikes, bore Mikes, torque wrenches, Digi-Mikes,KOSLOW Passervation 2026 tester, dial indicators, levels, risers, etc.

NEW TOOLING_____________________OVER $1 MILLION DOLLARS WORTH OF BRAND NEW TOOLING, MACHINESPECIFIC, INCLUDING PART DRAWINGS & TOOL DRAWINGS, ETC.

OFFICE FURNITURE & EQUIPMENTDESKS, CHAIRS, TABLES, BOOK SHELVES, PC’S, PRINTERS, FAX, COPIER,COMPUTER FURNITURE, ETC.

MISCELLANEOUSINCLUDING: Electric fans, portable electric tools, hand tools, material handling equip.,header and thread roller tooling and accessories, milling tools, R-8 tooling, racks withtubing, pipe and angles, hardware, plastic hardware bins, pallet racking, shelving, racks,wire baskets, steel & wooden parts tubs, cardboard packaging and shipping suppliesand equip., carts, ladders, lights, fans, taps & dies, threading equip., tables, work vises,milling vises, drill bits, reamers, cutters, Lathe tooling, chucks, steady rests, faceplates,tool posts, collets, magnetic chucks, grinding mandrels and accessories, grindingwheels, sanding belts, V-belts, motors, electrical and electronics spares, maintenanceequip., bearings, shop furniture, storage cabinets, plant support, etc.

75 HP GARDNER DENVER ELECTRA-SAVER II AIR COMPRESSOR INSPECTION & MEASURING

NEW TOOLING PARTIAL VIEW OF FORKLIFTS MECTRON LASER INSPECTION MACHINE

MISTSUBISHI FUSO BOX TRUCKHARDNESS TESTERTENSILE TESTER FORD L8000 BOX TRUCK

1 OF 2

2001 19922000

RACKS & DRILLING HEADSELEC. SCISSORS MANLIFT

LIKENEW!

MACHINERY AUCTION, LOOK INSIDE!

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

11426 Ventura BoulevardStudio City, California 91604Phone: 818.508.7034Fax: 818.508.3025info@biditup.com

LIVEON-SITE &WEBCAST

FOR THE COMPLETE TERMS & CONDITIONS OF THE AUCTIONPlease visit our website www.BIDITUP.com and click on CWR MANUFACTURING CORP.

FEATURED AUCTIONTUESDAY, MAY 5, 2009Beginning at 10:00am EDT

7000 Fly RoadEast Syracuse, NY

EXCEPTIONAL ROD HEADINGAND COLD FORMING FACILITY

Thinking of having an auction or need an appraisal? Call us at 818.508.7034

For a Complete Listing ofUpcoming Auctions

Visit www.BIDITUP.comRegister Online and Receive AuctionUpdates and Information via E-mail.

MACHINERY AUCTIONTUESDAY, MAY 5, 2009

AUCTIONTuesday, May 5th, 2009Beginning at 10:00am EDT

PREVIEWMonday, May 4th, 20099:00am to 4:00pm EDT

LOCATION7000 Fly RoadEast Syracuse, NY 13057

WEBCASTCan’t attend the auction inperson? You can participate andbid in real time via the Internet.Preview assets with detaileddigital photos, lot catalogs,and in-depth descriptions.

For more information, visitwww.BIDITUP.com

5/8” NATIONAL MODEL 6255 DIE PARTS FORMER

WATERBURY ROD HEADER MECTRON INSPECTION SYSTEM

EXCEPTIONAL ROD HEADING AND COLD FORMING FACILITYManufacturer of Special Multi Die Cold Formed and Long Headed Parts

PlantClosed:

PlantClosed: