Custom Moulding, Dimensional Lumber,& Millwork
Office 812-875-2215 www.MarnerWood.com FAX 812-875-2538
LLC.
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com1
Marner Wood Products LLC. is a family owned architectural woodworking firm in Worthington, Indiana. Since our establishment, our goal has been to provide the building industry with a quality product at a competitive price. Our skilled craftsmen and fine woodworking can add a unique element of sophistication and design to any home.
We welcome you to visit our showroom at Marner Wood Products in Worthington Indiana. Our moulding, and interior door displays will give you ideas for you next building project or new home.
Our office and showroom hours are 7:30am - 4pm Monday - Friday.
General Information
Woods Available(other species available on request)
1/4 Sawn Red Oak Knotty Alder
1/4 Sawn White Oak Mahogany
Birch Poplar
Brown Maple Red Oak
Cherry Soft Maple
Clear Alder Walnut
Hard Maple White Oak
Hickory
Mouldings and MoreA virtually unending supply of mouldings and other decorative or complementary millwork from Marner Wood Products is available. Stock or custom, whatever your needs, you will find what you want from us.
MouldingStock mouldings are typically available in several species including Poplar, , but customers can choose from any species of wood they prefer. The type of wood selected determines the availability of widths and lengths. And depending on the grade of wood, the mouldings can either be stained or painted.
DimensionsEvery effort has been made to have each profile illustration rendered as accurately as possible. If you would like to see an actual profile sample, contact us.
LengthsAll orders are produced and shipped in random lengths 6'-12" unless ordered otherwise. Customer agrees to accept overage of lineal feet ordered not to exceed 10% greater than original order.
Order SpecificationsDue to the custom nature of our business, some profiles are not stocked but run to order. When ordering, please specify the profile number, wood species and footage. Orders may be placed in person, by phone, fax, or email.
PricingPrices and quotes are available from any of our professional sales team members. Please note that prices are subject to change.
Recommendations for Installation of Hardwood MouldingsMoulding should be stored indoors and off of the floor to keep it dry.
Allow mouldings to acclimate for 3 to 5 days in cool temperatures.
Adequate blocking is needed to attach crowns to ceilings and wide casing to walls.
During installation, nail mouldings securely to studs and glue mitred corners. Adhesives can be used when blocking is not available. Mitres can receive biscuit-type joinery.
Due to environmental conditions, we are not responsible for changes in mouldings during or after installation.
Unfinished woodwork is vulnerable. Apply finish as soon as possible following the manufacture instructions.
Never expose unfinished millwork to direct sunlight.
Wood SpecificationsWood is a beautiful, naturally occurring product. A variety of grain patterns and color tones will exist in the same wood specie. Growing conditions such as the amount of rainfall, soil type, sunlight, minerals and temperature contribute to these variations. Natural characteristics in the wood such as varying color shades, grain patterns, burl, pin knots, mineral deposits, and sap are not considered defects.
Architectural Millwork 2
Applied Moulding -----------------3Backbands -------------------------- 3Bar Rail ------------------------------- 4Bases ----------------------------------5Casing---------------------------------14Chair Rails----------------------------19Crowns--------------------------------20Dentil Crowns ----------------------27Framestock & Furniture Bases--29Jambs ---------------------------------30Misc. -----------------------------------30Mulls-----------------------------------32Panel Moulds------------------------32Rails------------------------------------33S4S -------------------------------------35Tongue & Vee -----------------------36Trim------------------------------------38
Contents
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
3
Applied Moulding
AM 1027/8” x 21/32”
AM 1033/4” x 3/4”
AM 1049/16” x 11/16”
AM 1055/8” x 1/2”
AM 1061" x 1/4"
AM 1073/4" x 17/32"
AM 1081 1/8" x 3/4"
Backbands
UCM 751123/4" X 1 1/8"
UCM 1061501 1/16" X 1 1/2"
UCM 1091121 1/8" x 1 1/8" UCM 131150
1 5/16" x 1 1/2"
UCM 1061251 1/6" X 1 1/4"
UCM 1121751 1/8" x 1 3/4"
A rabbeted moulding used to surround the outside edge of casing. Also called Under Cabinet Moulding.
AM 1011 1/8” x 3/4”
Architectural Millwork 4
Bar Rail
Bar 40961 1/4" x 3"
Bar 516441 3/4" x 4 1/2"
Thank you for your interest in Marner Wood Products moulding. We have many different moulding profiles you can select from to enhance the appearance and value of your business, or home. Dollar for dollar hardwood moulding may be one of the best investments a homeowner or builder can make. It has been said that for every $2000 in mouldings purchased a homeowner can realize up to a $10,000 increase on home value.
We add new profiles regularly so please ask to see any newly added profiles.
Custom molding profiles can be replicated and milled to your exact requirements. We design and grind our own tooling, matching your existing moulding pattern is no problem.
Many Mouldings may be used for applications other than how we have categorized them in the catalog.
A moulding used to dress the edge of a bar or countertop.
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
5
Bases
BB 32511/16" x 3 1/4"
BB 42511/16" x 4 1/4"
BB 52511/16" x 5 1/4"
BB 72511/16" x 7 1/4"
BB Base
Applied where floor and walls meet, forming a visual foundation. Protects walls from kicks, bumps, furniture etc. Base may be referred to as One, Two or Three Member. Base Shoe & Base Cap are used to conceal uneven floor and wall junctions.
Architectural Millwork 6
Bases
CB 32511/16" x 3 1/4"
CB 42511/16" x 4 1/4"
CB 52511/16" x 5 1/4"
CB 72511/16" x 7 1/4"
CB Base
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
7
Bases
DB 32511/16" x 3 1/4
DB 42511/16" x 4 1/4
DB 52511/16" x 5 1/4
DB 72511/16" x 7 1/4
Architectural Millwork 8
Bases
EB 52511/16" x 5 1/4
EB 72511/16" x 7 1/4"
Bases
FPB 72511/16" x 7 1/4"
EB 42511/16" x 4 1/4
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
9
Bases
GB 32511/16" x 3 1/4"
GB 42511/16" x 4 1/4"
GB 52511/16" x 5 1/4"
GB 72511/16" x 7 1/4"GB Base
Architectural Millwork 10
Bases
OGB 32511/16" x 3 1/4"
OGB 42511/16" x 4 1/4"
OGB 52511/16" x 5 1/4"
OGB 72511/16" x 7 1/4" OGB Base
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
11
Bases
PB 32511/16" x 7 1/4"
PB 42511/16" x 4 1/4"
PB 52511/16" x 5 1/4"
PB Base
PB 72511/16" x 7 1/4"
Architectural Millwork 12
Bases
PG 32511/16" x 3 1/4"
PG 42511/16" x 4 1/4"
PG 52511/16" x 5 1/4"
PG 72511/16" x 7 1/4"
PG Base
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
13
Bases
RB 52511/16" x 5 1/4"
SB 40011/16" x 4"
TDB 32511/16" x 3 1/4"
WB 40011/16" x 4"
RB 525 Base
Architectural Millwork 14
CasingCasing is the wood trim or moulding applied to openings such as doors, windows and archways. Casings are used to cover the gap between the wall and the frame. Casings are the most visible trim or moulding and as such help define the character of a room.
BCA 2875 3/4" x 2 7/8"
BCA 3003/4" x 3"
BCA 3373/4" x 3 3/8"
BCA 3563/4" x 3 9/16"
BCA 4063/4" x 4 1/16"
BCA 5503/4" x 5 1/2"
ACA 3253/4" x 3 1/4"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
15
Casing
BCA 3623/4" x 3 5/8"
BCA 4253/4" x 4 1/4"
BVCA 3253/4" x 3 1/4"
CCA 2253/4" x 2 1/4"
CCA 2753/4" x 2 3/4"
CCA 3503/4" x 3 1/2"
CCA 4253/4" x 4 1/4"
BCA 2753/4" x 2 3/4"
Architectural Millwork 16
Casing
DCA 26253/4" x 2 5/8"
DCA 4253/4" x 4 1/4"
ECA 2753/4" x 2 3/4"
FCA 2753/4" x 2 3/4"
FCA 3373/4" x 3 3/8"
FCA 3503/4" x 3 1/2"
LCA 2253/4" x 2 1/4"
LCA 2753/4" x 2 3/4"
LCA 3503/4" x 3 1/2"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
17
Casing
OWCA Profile Corner
TDCA 2253/4" x 2 1/4"
VBC 3503/4" x 3 1/2"
MCA 2253/4" x 2 1/4"
MCA 2753/4" x 2 3/4"
MCA 3503/4" x 3 1/2"
OWCA 2753/4" x 2 3/4"
OWCA 3503/4" x 3 1/2"
Architectural Millwork 18
Casing
RCA 2753/4" x 2 3/4"
RCA 3503/4" x 3 1/2"
RCA 4253/4" x 4 1/4"
SCA 2503/4" x 2 1/2"
SCA 2753/4" x 2 3/4"
SCA 3503/4" x 3 1/2"
SCA 2253/4" x 2 1/4"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
19
Chair Rails
CH 563259/16" x 3 1/4"
CH 753503/4" x 3 1/2"
CH 1062371 1/16" x 2 38"
CHCAP 751753/4" x 1 3/4"
CH 7532511/16" x 3 1/4"
Interior moulding applied about one third up from the floor, paralleling Base Moulding and encircling the room. Originally used to prevent chairs from marring walls. Used today as a key decorative detail in traditional and colonial designs.
CH 6826211/16" x 2 5/8"
CH 6832511/16" x 3 1/4"
CH 1194831 3/16 x 4 13/16"
CH 6827511/16" x 2 3/4"
CH 1003251" x 3 1/4"
Architectural Millwork 20
CrownsCrown Moulding is usually installed in the corner where the ceiling and wall meet. It is a transitional moulding used to fill gaps and uneven edges or just add distinction to the room. The Crown Moulding can be as large as 15" depending on the style of the room. Mouldings can be combined to make a compound Crown Mould.
4 3/8"
4 3/
8"
BCM 60013/16" x 6"
Projection
Hei
ght
BCM 52513/16" x 5 1/4"
Projection
Hei
ght
BCM 3253/4" x 3 1/4""
2 3/8"
2 3/
8"
Projection
Hei
ght
1 15/16"
1 15
/16"
Projection
Hei
ght
ACR 2753/4" x 2 3/4"
3 1/
8"
Projection
Hei
ght
3 1/8"
BCM 4253/4" x 4 1/4"
3 3/8"
3 5/
8"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
21
Crowns
BCM 72513/16" x 7 1/4"
BCR 1759/16" x 1 3/4"
BCR 2255/8" x 2 1/4"
BCR 4253/4" x 4 1/4"
1 3/8"
1 3/
4"
5 1/8"
5 1/
8"
1 1/8"
1 7/
16"
Projection
Hei
ght
Projection
Hei
ght
Projection
Hei
ght
BCR 32511/16" x 3 1/4"
2"
2 9/
16"
Projection
Hei
ght
2 3/4"
3 7/
16"
Projection
Hei
ght
BCR 27519/32" x 2 3/4"
1 3/4"
2 1/
4"
Projection
Hei
ght
Architectural Millwork 22
Crowns
CCM 37513/16" x 3 3/4"
CCM 4001 1/8"" x 4"
2 3/4"
2 3/
4"
2 15/16"
2 15
/16"
BCR 5253/4" x 5 1/4"
3 1/2"
4 5/
16" Projection
Hei
ght
BCR 72513/16" x 7 1/4"
4 9/16"
5 13
/16"
Projection
Hei
ght
Projection
Hei
ght
Projection
Hei
ght
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
23
Crowns
CCM 650
1 1/8" x 6 1/2"
4 13/16"4
5/8"
CCM 52513/16" x 5 1/4"
3 1/2"
4 1/
4"
Projection
Hei
ght
ProjectionH
eigh
t
CCM 28753/4" x 2 7/8"2 1/16"
2 1/
16"
Projection
Hei
ght
CCR 1759/16" x 1 3/4"
1 1/4"
1 1/
4"
Projection
Hei
ght
CCR 37513/16" x 3 3/4"
Projection
Hei
ght
2 3/
4"
2 3/4"
Architectural Millwork 24
Crowns
CCR 42513/16" x 4 1/4"
CCR 7251 1/2" x 7 1/4"
3 1/
8"
3 1/8"
5 3/8"
5 3/
8"
Projection
Hei
ght
Projection
Hei
ght
CCR 52513/16" x 5 1/4"
3 7/
8"
3 7/8"Projection
Hei
ght
CCR 32513/16" x 3 1/4"
2 3/
8"
2 3/8"
Projection
Hei
ght
CCR 27513/16" x 2 3/4"Projection
Hei
ght
2"
2"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com25
Crowns
DBM 3253/4" x 3 1/4"
DBM 4253/4" x 4 1/4"
DBM 5253/4" x 5 1/4"
ECR 7251 3/16" x 7 1/4"
2 1/4"
2 1/
4"
3 1/16"
3 1/
16"
5"
5 3/
16"
Projection
Hei
ght
Projection
Hei
ght
3 7/8"
3 7/
8"
Projection
Hei
ght
Projection
Hei
ght
Architectural Millwork 26
Crowns
ECR 4253/4" x 4 1/4" ECR 525
3/4" x 5 1/4"
3 1/8"
3"
Projection
Hei
ght
3 7/8"
3 3/
4"
Projection
Hei
ght
Projection
Hei
ght
3 1/4"
2 3/
8"
FCR 4003/4" x 4"
ECR 5003/4" x 5"
4 5/16'
2 1/
4"
Projection
Hei
ght
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com27
Crowns
SCM 4253/4" x 4 1/4"
Dentil Crowns
DCR 2753/4" x 2 3/4"
2 11/16"
3 1/
8"
1 15/16"
1 15
/16"
Dentil 521009/16" x 1"
Reed 50621/2" x 5/8"
SCM 3253/4" x 3 1/4"2"
2 7/
16"
Projection
Hei
ght Projection
Hei
ght
Projection
Hei
ght
Dentil 751873/4" x 1 7/8"
Architectural Millwork 28
Dentil Crowns
DCR 3753/4" x 3 3/4"
Series of small square blocks evenly spaced and projecting like teeth as used in cornice, front entrances, crossheads and mantels.
2 3/
4"
2 3/4" 2 5/8"
3 1/
8"
DCR 4003/4" x 4"
Projection
Hei
ght
Projection
Hei
ght
DCR 5253/4" x 5 1/4"
3 13/16"
3 13
/16"
Projection
Hei
ght
DCR 53713/16" x 5 3/8"
3"
4 1/
2"
Projection
Hei
ght
Dentil 50621/2" x 5/8"
1/2 Rope
1/4 Rope
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
29
Framestock & Furniture Bases
Framestock 1503/4" x 1 1/2"
Framestock 2003/4" x 2"
FB 4001" x 4"
FB 52511/16" x 5 1/4"
FB 3501 1/4" x 3 1/2"
DCW2253/4" x 2 1/4"
Architectural Millwork 30
Jambs
Misc.
FJ 4563/4" x 4 9/16"
RJ 4563/4" x 4 9/16"
Top and two sides of a door or window frame which contact the door or sash; top jamb and side jambs.
Circle Casing Block
Keystone Casing Block
Casing Block
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
31
Misc.
TG Louver5/8" x 4"
Inside Corner Block Outside Corner Block
Radius Corner4 1/4" x 1 1/2"
TGB 37300Sample Block
3/8" x 3"
Mulls
M 251001/4" x 1"
M 251251/4" x 1 1/4"
M 251501/4" x 1 1/2"
M 251751/4" x 1 3/4"
M 252001/4" x 2"
Panel Moulds
PM 621255/8" x 1 1/4"
PM 622005/8" x 2"
PM 6515011/16" x 1 1/2"
PM 751503/4" x 1 1/2"
PM 752003/4" x 2"
PM 752253/4" x 2 1/4"
PM 8116013/16" x 1 5/8"
The upright or vertical piece dividing the panels in a door; the vertical piece of a sash, window or door frame between openings in a multiple-opening frame. It forms a division between units of a window, door, or screen or it can also be used decoratively.
Architectural Millwork 32
PM 8117513/16" x 1 3/4"
Panel Moulds
PM 8120013/16" x 2"
PM 871507/8" x 1 1/2"
PM 871627/8" x 1 5/8"
PM 1002001" x 2"
WallRails
Ball Rail 22"
Ball Rail 33"
A panel moulding is a decorative pattern used to trim out raised panel wall construction or applied directly to a wall to create a panelled appearance.
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
33
PM 1031251 1/32" X 1 1/4"
PM 81200 Knotch13/16" x 2"
Architectural Millwork 34
WallRails
Hand Rail 60102 1/4" x 2 3/8"
Hand Rail 61102 1/4" x 2 3/4"
Hand Rail 67192 5/8" x 3"
Used as hand support in a stairwell.
Shoe Rail 60061" x 3 1/8"
Hand Rail 62102 5/8" x 2 3/8"
S4S
Surfaced Four Sides ( S4S ) or Dimensional lumber is ready to be made into furniture, cabinets, trim or your own project. The edges are straight and parallel. Marner Wood S4S lumber is surfaced 4 sides.
We also offer S3S
Custom Sizes are available.
S4S Framestock
1" 4 1/4"
1 1/2" 5"
1 3/4" 6"
2" 8"
2 1/4" 9"
2 1/2" 10"
3" 12"
3 1/2"
Refers to square cornered dimensional boards that have all the faces and edges planed or sanded smooth, i.e. the term "surfaced-four-sides."
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com35
Woods Available(other species available on request)
1/4 Sawn Red Oak Knotty Alder
1/4 Sawn White Oak Mahogany
Birch Poplar
Brown Maple Red Oak
Cherry Soft Maple
Clear Alder Walnut
Hard Maple White Oak
Hickory
Surfaced Four Sides
2" 6"
3" 8"
3 1/2" 9 1/2"
4 9/16" 11 1/2"
5 1/2"
Architectural Millwork 36
Tongue & VeeWainscoting
Originally used to trim out raised panel wall construction. Now often used to frame attractive wall coverings for a panelled effect.
TGB 373003/8" x 3"
TGB 374003/8" x 4"
TGB 375003/8" x 5"
TGB 623005/8" x 3"
TGB 624005/8" x 4"
TGB 625005/8" x 5"
TGBD 373003/8" x 3"
TGBD 753003/4" x 3"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com37
Tongue & Vee
Wainscoting
TVG 755123/4" x 5"
TVGP 373003/8" x 3"
TVGP 374003/8" x 4"
TVGP 375003/8" x 5"
TVGP 753003/4" x 3"
TVGP 75400 3/4" x 4"
TVGP 755003/4" x 5"
Trim
Bead 31815/16" x 13/16"Ball Corner 5050
1/2" x 1/2"
Batten 25751/4" x 3/4"
Brick Mould 1252001 1/4" x 2"
CL 25501/4" x 1/2"
CL 37753/8" x 3/4" H 5075
1/2" x 3/4"
HR 751253/4" x 1 1/4"
ISC 75753/4" x 3/4"
OSC 1251 1/4" x 1 1/4"
OSC 75753/4" x 3/4"
Ball Corner 75753/4" x 3/4"
OSC 1001" x 1"
OSC 6520045 Degree5/8" x 2"
Architectural Millwork 38
ISC 1001" x 1"
ISC 87877/8" x 7/8"ISC 175
9/16" x 1 3/4"
Trim
QR 75753/4" x 3/4"
Scribe 31815/16" X 13/16"
Shoe 50751/2" x 3/4"
TR 1002001" x 2"
TR 31505/16" x 1/2"
TR 37683/8" x 11/16"
TR 37753/8" x 3/4"
TR 44507/16" x 1/2"
TR 501121/2" x 1 1/8"
TR 561259/16" x 11/4"
TR 56759/16" x 3/4"
TR 62755/8" x 3/4"
TR 50751/2" x 3/4"
TR 751403/4" x 1 7/16"
TR 751503/4" x 1 1/2"
TR 75993/4" x 1"
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
39
Trim
TR 43507/16" x 1/2"
QR 1001" x 1"
TR 43757/16" x 3/4"
Stop 371063/8" x 1"
TR 125505/16" x 1/2"
TR 5075 A1/2" x 3/4"
Architectural Millwork 40
Notes
Marner Wood Products LLC. • 9488 N 60 W Worthington IN 47471(812) 875-2215 Fax (812) 875-2538 • www.MarnerWood.com
41
Architectural Millwork 42
Photos