+ All Categories
Home > Documents > LMU-800™ GPRS/CDMA/HSPA Series

LMU-800™ GPRS/CDMA/HSPA Series

Date post: 09-Dec-2021
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
2
EXPERIENCE THE ADVANTAGE GSM/GPRS, CDMA 1xRTT or HSPA configuration Economical and flexible device Superior GPS and cellular performance Internal or external cellular antenna for easy installation Built-in backup battery Built-in 3-axis accelerometer for motion, tilt, and impact detection Low power sleep modes 3 Inputs and 3 outputs Over-the-air update capability for configuration and firmware The LMU-800 is an economical, full-featured vehicle tracking product designed for easy and reliable installation in automobiles. The LMU-800 is an ideal solution for stolen vehicle, vehicle finance, auto rental and other automotive track and trace applications where internal back-up battery is required. COMPETITIVE PRICE, COMPETITIVE TECHNOLOGY, COMPETITIVE EDGE The LMU-800 high-value tracking unit from CalAmp features a small size, superior GPS performance, an internal 200mAh back-up battery, ultra low power sleep modes, 3-axis accelerometer for motion sense, and three inputs and three outputs (I/O). The LMU-800 is a complete vehicle tracking and communication device incorporating next-generation, super- sensitive GPS technology on GSM/GPRS/CDMA 1xRTT/HSPA cellular networks for installation in any 12 or 24 volt mobile vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the LMU-800 mountable virtually anywhere in the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communication link between the device and your application servers. The LMU-800 is designed to dramatically reduce cost of ownership, power and size while providing excellent field reliability. FLEXIBILITY The LMU-800 employs CalAmp’s advanced industry on-board alert engine, PEG™ (Programmable Event Generator) to monitor external conditions and support customer- defined exception-based rules to meet your applications requirements. PEG ™ monitors the vehicle environments and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over- the-air once the unit has been fielded. OVER-THE-AIR SERVICEABILITY The LMU-800 leverages CalAmp’s management and maintenance system, PULS™ (Programming, Updates and Logistics System), for all over-the-air configuration parameters, PEG rules, and firmware. This out-of-the-box hands free configuration and automatic post- installation upgrades can monitor unit health status across your customers’ fleets to identify issues before they become expensive problems. CalAmp Corp. | www.calamp.com LMU-800™ GPRS/CDMA/HSPA Series Flexible, Economical GPS Tracking Unit
Transcript
Page 1: LMU-800™ GPRS/CDMA/HSPA Series

EXPERIENCE THE ADVANTAGE

• GSM/GPRS, CDMA 1xRTT or HSPA

configuration

• Economical and flexible device

• Superior GPS and cellular performance

• Internal or external cellular antenna for

easy installation

• Built-in backup battery

• Built-in 3-axis accelerometer for

motion, tilt, and impact detection

• Low power sleep modes

• 3 Inputs and 3 outputs

• Over-the-air update capability for

configuration and firmware

The LMU-800 is an economical, full-featured vehicle tracking product designed for easy and reliable installation in automobiles. The LMU-800 is an ideal solution for stolen vehicle, vehicle finance, auto rental and other automotive track and trace applications where internal back-up battery is required.

COMPETITIVE PRICE, COMPETITIVE TECHNOLOGY, COMPETITIVE EDGE

The LMU-800 high-value tracking unit from CalAmp features a small size, superior GPS performance, an internal 200mAh back-up battery, ultra low power sleep modes, 3-axis accelerometer for motion sense, and three inputs and three outputs (I/O). The LMU-800 is a complete vehicle tracking and communication device incorporating next-generation, super-sensitive GPS technology on GSM/GPRS/CDMA 1xRTT/HSPA cellular networks for installation in any 12 or 24 volt mobile vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the LMU-800 mountable virtually anywhere in the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communication link between the device and your application servers. The LMU-800 is designed to dramatically reduce cost of ownership, power and size while providing excellent field reliability.

FLEXIBILITY

The LMU-800 employs CalAmp’s advanced industry on-board alert engine, PEG™ (Programmable Event Generator) to monitor external conditions and support customer-defined exception-based rules to meet your applications requirements. PEG ™ monitors the vehicle environments and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded. OVER-THE-AIR SERVICEABILITY

The LMU-800 leverages CalAmp’s management and maintenance system, PULS™ (Programming, Updates and Logistics System), for all over-the-air configuration parameters, PEG rules, and firmware. This out-of-the-box hands free configuration and automatic post-installation upgrades can monitor unit health status across your customers’ fleets to identify issues before they become expensive problems.

CalAmp Corp. | www.calamp.com

LMU-800™ GPRS/CDMA/HSPA SeriesFlexible, Economical GPS Tracking Unit

Page 2: LMU-800™ GPRS/CDMA/HSPA Series

About CalAmpCalAmp Corp. (NASDAQ: CAMP) is a proven leader in providing wirelesscommunications solutions to a broad array of vertical market applications and customers. CalAmp’s extensive portfolio of intelligent communications devices streamline otherwise complex machine-to-machine (M2M) deployments. These solutions enable customers to optimize their operations by collecting, monitoring and efficiently reporting business critical data and desired intelligence from high-value remote assets. For more information, please visit www.calamp.com.

CalAmp Corp. | www.calamp.com

CalAmp Corp.2117 Salk Avenue, Suite 200, Carlsbad, CA 92008T: 760.438.9010 l F: 760.438.5835www.calamp.comCalAmp Corp. l www.calamp.com© 2015 CalAmp. Rev: 6.15.15All specifications are typical and subject to change without notice

ENVIRONMENTALTemperature -30° to + 75° C (connected to primary power) -40° to + 85° C (storage)Humidity 95% R.H. @ 50° C non-condensingShock and Vibration U.S. Military Standard 202G and 801G, SAE J1455EMC/EMI SAE J1113; FCC-Part 15B; Industry CanadaRoHS Compliant

ELECTRICALOperating Voltage 7-32 VDC (momentary) 9-30 VDC (start-up, operating)Power Consumption <7mA @ 12V (deep sleep) <22mA @ 12V (radio-active sleep) <29mA @ 12V (SMS+UDP connection, GPS off) <115mA @ 12V (continuous transmit)

PHYSICALDimensions 3.5” x 2.125” x 0.625” (89 x 54 x 16mm)Weight 3.7oz (106g) Internal

CONNECTORS, SIM ACCESSSIM Access Internal (GSM,GPRS or HSPA variant only)Connection Type Captive 8 wire harnessGPS Antenna External SMA (tamper monitoring, 3 V) or internalCellular Antenna External SMC or internal

CERTIFICATIONSFully certified FCC, CE, IC, PTCRB, Applicable Carriers

MOUNTINGTie-wrap or adhesive

KEY FEATURES • UDP and SMS-based messaging • Super sensitive GPS (-162dBm) • Internal 200mAh back-up battery • Ultra-low power sleep mode (<2mA) • 3-axis accelerometer for motion sense and tilt • 3 inputs and 3 outputs • Voltage monitoring and low battery notification • 2,000 buffered messages • Built-in harness • 10 Built-in geo-fences • PEG™ Exception-Based Rules • Automatic, over-the-air unit configurations on power-up (PULS™) • Over-the-air firmware download (PULS™) • Web-based device management (PULS™) • Optional Internal or external cellular and GPS antennas • Optional starter interrupt harness • Optional ODB-II easy install harness • Optional serial programming cable

GENERALCommunication Modes GPRS/EDGE/HSPA CDMA 1xRTT packet data, UDP and SMSOperating Voltage 12 and 24 volt vehicle systems

GPS Location Technology 50 channel GPS (with SBAS)Enhancement Technology SBAS: WAAS, EGNOS, MSAS, GAGANTracking Sensitivity -162 dBmAcquisition Sensitivity -147 dBmLocation Accuracy 2.0mAGPS Capable

CELLULARData Support SMS, UDP packet dataOperating Bands (MHz) GSM/GPRS 850/900/1800/1900 CDMA/ 1xRTT 850/1900 HSPA/UMTS 800(VI)/ 850(V)/ 900(VIII)/ 1700(IV)/ 1900(II)/ 2100(I)Transmitter Power GSM/GPRS 850/900 32.5 dBm 1800/1900 29.3 dBm CDMA/1xRTT 850 24 dBm 1900 23 dBm HSPA/UMTS (all bands) 23 dBmHSPA Data Rates 5.6 Mbps upload/ 7.2 Mbps downloadHSPA Fallback EDGE/GPRS/GSM quad band EDGE MCS1-MCS9 3GPP release 6

COMPREHENSIVE I/ODigital Inputs 3 fixed bias/ programmable biasDigital Outputs 3 open collector (150 mA) Analog Inputs 1 internal VCC monitorStatus LED’s GPS and cellular

DEVELOPMENT SUPPORT OPTIONSCustomized hardware and software development available on request

LMU-800 SPECIFICATIONS


Recommended