LOCK / KEYThere is no additional charge for key numbers 151‑999 but they could potentially add...

ofs.com imagine a place® 800.521.5381 2020 Pricing K

FIELD INSTALLED CORES & KEYS

Field Installed Cores & Keys Select the “LOCK” option when ordering product with a lock. The product will initially ship with a plastic plug, which will be removed in the field and the lock core installed.

Cores & Keys will ship in a separate package. Multiple cores and keys may be shipped together in one package.

You do not need a Core Change to install the original lock core. Once installed, a Core Change is requred for removal. A Core Change may be ordered for $32 list.

KEYING TYPES

Three keying options are available to pick from to be field installed. (Keyed Alike, Keyed Random & Keyed Consecutive)

Keyed Alike all cores and keys on that line will match the starting key number selected.

Keyed Random all cores and keys on that line will be randomly selected. You do not have to pick a key number with this option.Note: you could end up with two of the same number when ordering large quantities.

Keyed Consecutive all keys included in the quantity will be numbered in consecuctive order starting with the starting key number you select. This will make sure no two numbers are the same. You must pick a starting key number.

Standard Key # numbers range between 100‑200 when using the Nickel color and 100‑150 when using Black or Brass. Additional numbers 151‑999 are available when using Black or Nickel Cores. There is no additional charge for key numbers 151‑999 but they could potentially add additional lead time.

USING LOCK OPTION

Five lock core models are available to pick from to be field installed. They are:

The options available on these models are:

OPTION 1: Color (Black, Nickel or Brass)OPTION 2: Type (Alike, Random or Consecutive)OPTION 3: Starting Key # (This applies to the Alike and Consecutive types only)OPTION 4: Number of Sets

LOCK-SET- 1This includes 1 core & 1 key

LOCK-SET- 2This includes 2 cores & 2 keys




100

100

100

101

128

143

100

101

102

When using “LOCK” option your cores and keys must be ordered separately by ordering LOCK-SET(s) (see below for ordering instructions) to satisfy the number of locking mechanisms required for product on your PO.

EXAMPLES

Example of using Keyed Alike If you have one office that requires multiple cores & keys which all need to be the same lock number you could order

Model Color Type Starting # Number of SetsLOCK‑SET‑2 Black Alike 100 1

In this scenarios you would receive (2) cores and keys with the key number of 100.

Example of using Keyed RandomIf you had 8 workstations that required one unique core & key per user you could order

Model Color Type Starting # Number of SetsLOCK‑SET‑1 Black Random n/a 8

In this scenario you would receive (8) cores and keys consisting of 8 different numbers chosen randomly.

Example of using Keyed ConsecutiveIf you had multiple offices that required (2) cores & keys per office where each office requires matching keys you could order

Model Color Type Starting # Number of SetsLOCK‑SET‑2 Black Consecutive 100 6

In this scenario you would receive (6) sets of cores and keys consisting of key numbers that would start from 100. You would have (2) 100’s, (2) 101’s, (2)102’s...(2) 105’s.

LOCK / KEY

ofs.com imagine a place® 800.521.5381 2020 Pricing O

MODIFICATION LIST

mod# modification detail list price

1. MOD#1 Standard OFS Hardware Pulls $26 Each

2. MOD#2 All Modular Top, End Panel, and Back Panel Cut Downs $104

3. MOD#3 Move or Add Grommets (customer to specify location) $73 Each

4. MOD#4 Reinforced Drawers - factory installed metal support bars. (Available on lateral files and on 16”D file drawers)Applicable on filing in most casegoods 24”D or under. Contact Customer Service or Specials Costing for applicability on other items.

Per$31 Drawer

5. MOD#5 Fabric Tackboards (any size reduction or an increase in height up to 6”) $52

6. MOD#6 Contemporary - BBF to FF No Upcharge

7. MOD#7 Contemporary - FF to BBF No Upcharge

8. MOD#8 Wire Access Cutout in Back Panel (4" x 4") - Available on Bridges, Returns, Credenzas, & Corner Units.Cannot be located closer than 3" from any edge. (customer to specify location)

No Upcharge

9. MOD#9 Wire Access Cutout in Back Panel (12" x 12") - Available on Bridges, Returns, Credenzas, & Corner Units.Cannot be located closer than 3" from any edge. For units with Signature Band, top clearance is 6". (customer to specify location)

No Upcharge

10. MOD#10 Locking (non-electronic) for wood or laminate doors only. Per individual storage section (no vertical divider). $156

11. MOD#11 Seating with 2 Different Fabrics Two Same Grade Fabrics = Next Higher Grade Two Different Grade Fabrics = Higher of the Two Three Different Grade Fabrics = Highest of the Three (Note: Contrasting welt only available in a single fabric. Two-toned welt is not available.) (two-tone diagram required from customer at time of ordering - contact customer service)

12. MOD#12 Plywood Drawers $52 Each

13. MOD#13 Venting Slots (customer to specify location) $78

14. MOD#14 All Bullets or P Tables Removal of Modesty Panel No Upcharge

15. MOD#15 Highback or Wallmount Organizers Removal of Doors No Upcharge

17. MOD#17 Wire Access Door in Back Panel (18" x 15") Left Hinge - Available on Bridges, Returns, Credenzas, & Corner Units.Top clearance is 3". (customer to specify location) Note: Not Available on Pulse, Quest-Laminate, or Cambria-Laminate

$463 Each

18. MOD#18 Set of 4 Casters - Available on some Pedestals $57

19. MOD#19 Full Wood Panel Set of Doors on Bookcase 72" Tall and under $832

20. MOD#20 Full Wood Panel Set of Doors on Bookcase 30" Tall and under $390

22. MOD#22 Casegood Units Cutdown — TFL, HPL and Veneer Width Only (cannot affect drawer size, glass or metal items) 15% Upcharge

23. MOD#23 Increase Worksurface or Top Depth from 48”D – 59.5”D — TFL, HPL and Veneer Only Excludes 3D Laminate Tops (Note: larger tops may require proportionately larger bases and support)

35% Upcharge

24. MOD#24 Specify Built Up TFL Units Only in Two Color Options Must Indicate Specific Laminate Placement (drawing recommended)

No Upcharge

Liability Clause:This pricing structure represents the more commonly requested product modifications. Although these modifications can be applied to the vast majority of products listed in our price books, some modifications cannot be applied to products with non-standard design features. Please contact your Customer Service Representative if you require assistance.

How to Order:

ExampleQty MOD# Model Number Modification Detail Options

1 MOD#2 34-10824MCT cut down to 104” wide B5A - BUW - G1 - G1

Price

$1,568 + $104 = $1,672

435ofs.com imagine a place® 800.521.5381 2020 Pricing

Pulse Casegoods

LAMINATE

Quality laminate panel construction using thermally-fused laminate with 1mm PP edge.

PRIMARY WORKSURFACE

1.125" thick worksurfaces are thermally-fused laminate with a 3mm PP edge. Primary worksurfaces are profiled on approach and user sides; secondary worksurfaces are profiled on user side only. Durable scratch-resistant matte finish on all units. Optional high pressure laminate tops available.

RECESSED DESK MODESTY

36"D Rectangular Desk - 9" 30"D Rectangular Desk - 3" 36"D Bow Desk (Ends are 30") - 3"

PEDESTALS

Full or 3/4 pedestals with full modesty panels are standard.

WIRE MANAGEMENT

Wire management is standard in returns, bridge units, credenzas, corner units and hutch units.

DRAWERS

Engineered composite wood material with mitered corners provides excellent strength and durability. Woodgrain patterned drawer sides provide a consistent appearance and are stain resistant and easily cleaned.

FILE DRAWERS

File drawers have full extension, progressive action slides with steel ball bearing suspensions. They accommodate letter or legal filing.

END AND BACK PANEL GRAIN DIRECTION

End panels on all desks, credenzas, returns, bridges, P-tables, bullet tables, wardrobes, lateral files, bookcases, corner units, cockpit corner units, modular pedestals, shells and wing assemblies are all vertical grain.

Back panels on units that are 60" overall and larger have horizontal grain direction.

LOCKING

Pedestal locks secure all drawers with the turn of a single key. All units are standard shipped keyed alike. Specific key requirements may be specified on the purchase order at the time the order is placed for field installation (ships separately). Removable lock cores allow for re-keying in the field.

Built up units (desks, credenzas, returns, etc.) locking is on inside of pedestal except for multi-files or lateral files. Multi-flies, lateral files and modular products locking is on front of pedestal.

FILING

See page 1099 for diagrams of all Pulse filing capabilities.


Pulse Casegoods

FINISH OPTIONS AND FABRIC PARTNERS

Available in (EW) Bead, (EX) Flair and (EY) Square edges only:

(EW) Bead (EX) Flair (EY) Square

TFL Woodgrain Laminate

Quartered Flat CutQE2 Molasses VM2 Cognac

DS2 Desert MC2 Mocha

KD2 Kodiak LC2 Sienna

NW2 Root BU2 Burnished

EN2 Toffee BE2 Blonde

CO2 Linen MH2 Honey

PC2 Pecan LM2 Ochre

QR2 Quarry

ST2 Steel

TFL Solid Color Laminate

FW2 Frosty White

HPL Finish available on worksurface only – 10% upcharge(When HPL top is specified, the chassis will be matching TFL)

HPL Woodgrain Laminate (10% upcharge)

Quartered Flat CutQEP Molasses MGP Cognac

DSP Desert CMP Mocha

KDP Kodiak CHP Sienna

NWP Root BUP Burnished

MEP Toffee BEP Blonde

COP Linen HNP Honey

PCP Pecan TMP Ochre

QRP Quarry

STP Steel

HPL Solid Color Laminate (10% upcharge)

FWP Frosty White

Available in (EY) Square edge only:

TFL Woodgrain Laminate (10% upcharge)

QuarteredNG2 Natural Champagne

NH2 Natural Steamwash


BL2 Black

GR2 Grey

RW2 Pure White

SG2 Slate Grey

HPL Finish available on worksurface only – 10% upcharge(When HPL top is specified, the chassis will be matching TFL)


QuarteredNGP Natural Champagne

NHP Natural Steamwash


BLP Black

GRP Grey

RWP Pure White

SGP Slate Grey

Fabric Partners

ARC-COMwww.arc-com.com

ARCHITEXwww.architex-ljh.com

CAMIRAwww.camirafabrics.com

CARNEGIEwww.carnegiefabrics.com

C.F. STINSONwww.cfstinson.com

DESIGNTEXwww.designtex.com

GREEN HIDESwww.greenhides.com

HELVETIA LEATHERwww.helvetialeather.com

MAHARAM

www.maharam.com

MAYER FABRICSwww.mayerfabrics.com

MOMENTUM

www.themomgroup.com

SPRADLING INTERNATIONAL, INC.

www.spradlingvinyl.com

ULTRAFABRICSwww.ultrafabricsllc.com


Pulse Casegoods

DRAWER PULL OPTIONS

Axis Crest Empire Era Forte Grip Icon

Note: Not available on Org@Tower Desk.

STANDARD GROMMETS (FACTORY INSTALLED)

Grommets are standard on these secondary worksurfaces: returns, bridge units, credenzas, corner units and hutch units.

overall size 3.375" x 2" inside dimensions with inserts 1.5" x 0.75" inside dimensions without inserts 2.9375" x 1.5"

OPTIONAL WORKSURFACE GROMMETS (FACTORY INSTALLED)

Grommets Location Option: listG1 No GrommetG2 Grommet on Right $ 73G3 Grommet in Center 73G4 Grommet on Left 73G5 Grommets Right and Left 146G6 Grommets Right and Center 146G7 Grommets Left and Center 146G8 Grommets Right, Left and Center 219

Note: Desk grommet options: G1, G2, G4 and G5 only.

Note: Bridges, Returns, Kneespace Credenzas are standard with G3 center grommet; for other grommet options on these units: Add upcharge of $73 list for grommets specified in addition to center grommet; i.e. for G5 Right and Left, add $146 list; for G6 Right and Center, add $73 list.

Grommet Color:

G1 No Grommet

LJ Black (Standard Pull Finish: Onyx, Gold, Graphite, Oiled Bronze, Soft Bronze)

LK Satin Nickel (Standard Pull Finish: Bone White, Buff, Chalk, Luster Grey, Polar, Warm Grey)

HA Mechanism/Grommet Finish:

BLKM BlackMSLM Satin Nickel/Silver


Pulse Casegoods

ADJUSTABLE HEIGHT PEDESTAL DESK STANDARD FEATURES

• ElectronicHeightAdjustable(30"-46"H)

• TableMaximumWeightAllowanceis100lbs.

• FullFixedRecessedModestyPanel(9"on36"DDesk,3"on30"DDesk)

• Two16"DBoxDrawers

• Fixed8"DShelfinKneespace

• LetterorLegalFiling

• LockingPedestals(LocksLocatedinKneespace)

• OptionalHeightAdjustablePartialModestyPanelAttachestoWorksurface

• OptionalCenterDrawer(seepage517)

• NOTE:NotRecommendedforUsewithTackboard

SINGLE PEDESTAL

model w d h wt cu ft list

4-6630HALPD-2 LEFT 66 30 30 303 40 $ 4,466

4-7230HALPD-2 LEFT 72 30 30 325 44 $ 4,527

4-7236HALPD-2 LEFT 72 36 30 345 62 $ 4,583

4-6630HARPD-2 RIGHT 66 30 30 303 40 $ 4,466

4-7230HARPD-2 RIGHT 72 30 30 325 44 $ 4,527

4-7236HARPD-2 RIGHT 72 36 30 345 62 $ 4,583

• One16"DFileDrawer

• 66"Whas51.125"WKneespace

• 72"Whas55.125"WKneespace

• NOTE:LooseSupportIncludedforAttachingtoStaticReturnorBridge

DOUBLE PEDESTAL


4-6630HADP-2 34.25"WKneespace 66 30 30 346 40 $ 4,908

4-7230HADP-2 40.25"WKneespace 72 30 30 379 44 $ 4,915

4-7236HADP-2 40.25"WKneespace 72 36 30 431 62 $ 4,922

• Three16"DFileDrawers

OPTIONS

Finish Edge Pull Pull Finish Modesty Grommet Control Panel Lock

TFLWoodgrainLaminate

QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2

Flat CutVM2MC2

LC2BU2

BE2MH2

LM2

TFLSolidColorLaminate

FW2

HPLWoodgrainLaminate(10%upcharge)

QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP

HPLSolidColorLaminate(10%upcharge)

FWP

NOTE:WhenHPLtopisspecified,the

chassiswillbematchingTFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT BoneWhite

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL LusterGrey

H1P OiledBronze

BKO Onyx

POLR Polar

SNCK SatinNickel

SBRZ SoftBronze

H1F WarmGrey

X9 NoPartialModesty-

Standard

GJ PartialModesty$336

G1 NoGrommet-

StandardG2 Right$73G4 Left$73G5 RightandLeft

$146

NOTE:ForGrommet

Finishseepage437

SCal/Min Report Alarm Set

C4T Classic-Standard

PDSW PaddleSwitch

Locking -SpecifcKey

• LocksorderedseparatelyseepageK

LCK1 Requires1LockCore

4-6630HALPD-2 4-7230HALPD-2 4-7236HALPD-2 4-6630HARPD-2 4-7230HARPD-2 4-7236HARPD-2 LCK2 Requires2LockCores 4-6630HADP-2 4-7230HADP-2 4-7236HADP-2


BL2 GR2 RW2 SG2 Textured Laminate (10% upcharge)NG2 NH2


BLP GRP RWP SGP Textured Laminate (10% upcharge)NGP NHP

NOTE:WhenHPLtopisspecified,the

chassiswillbematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|pull|pullfinish|modesty|grommet|controlpanel|lock.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-6630HALPD-2

Finish Edge Pull Pull Finish Modesty Grommet Control Panel Lock

CO2 EW Grip BWT X9 G1 C4T LCK1


Pulse Casegoods

ADJUSTABLE HEIGHT DESK SHELL STANDARD FEATURES

• ElectronicHeightAdjustable(30"-46"H)


• FullFixedRecessedModestyPanel(3")

• Fixed8"DShelfinKneespace



• NOTE:LooseSupportIncludedforAttachingtoStaticReturnorBridge

• NOTE:NotRecommendedforUsewithTackboard


4-6030HASHEL-2 60 30 30 216 37 $ 3,617

4-6630HASHEL-2 66 30 30 226 40 $ 3,824

4-7230HASHEL-2 72 30 30 238 44 $ 3,962

4-7236HASHEL-2 72 36 30 261 62 $ 4,243

OPTIONS

Finish Edge Modesty Grommet HA Mechanism/Grommet Finish Control Panel


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2

Flat CutVM2 MC2 LC2 BU2 BE2 MH2 LM2


FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP

Flat CutMGP CMP CHP BUP BEP HNP TMP


FWP

NOTE:WhenHPLtopisspecified,thechassiswill

bematchingTFL

EW Bead

EX Flair

EY Square


Standard


G1 NoGrommet-StandardG2 Right$73G4 Left$73G5 RightandLeft$146

BLKM Black

MSLM SatinNickel/SilverS

Cal/Min Report Alarm Set


PDSW PaddleSwitch






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|modesty|grommet|mechanism/grommetfinish|controlpanel.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-6030HASHEL-2


CO2 EW X9 G1 BLKM C4T


Pulse Casegoods

ADJUSTABLE HEIGHT TABLE DESK STANDARD FEATURES

• ElectronicHeightAdjustable(22.75"-48.75"H)


• RectangularWorksurfacewithProfileallFourSides

• OffsetSquareLiftingColumn

• FlatBaseFootwithGlide



4-4830HAD 48 30 22.75 130 26 $ 2,306

4-5430HAD 54 30 22.75 145 29 $ 2,344

4-6030HAD 60 30 22.75 157 33 $ 2,401

4-6630HAD 66 30 22.75 165 36 $ 2,478

4-7230HAD 72 30 22.75 174 39 $ 2,517

4-7236HAD 72 36 22.75 196 46 $ 2,590

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


bematchingTFL

EW Bead

EX Flair

EY Square


Standard

GJ PartialModesty

4-4830HAD$3194-5430HAD$3374-6030HAD$3554-6630HAD$3674-7230HAD$3804-7236HAD$380

G1 NoGrommet-StandardG2 Right$73G4 Left$73G5 RightandLeft$146

BLKM Black




PDSW PaddleSwitch






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|modesty|grommet|mechanism/grommet|controlpanel.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-4830HAD




Pulse Casegoods

ADJUSTABLE HEIGHT TABLE BRIDGE STANDARD FEATURES

• ElectronicHeightAdjustable(22.75"-48.75"H)


• RectangularWorksurfacewithProfileonUserSide

• ShortGrainDirection

• OffsetSquareLiftingColumn

• FlatBaseFootwithGlide


• G3CenterGrommetStandard


4-2242HAB 42 22 22.75 106 17 $ 2,158

4-2248HAB 48 22 22.75 117 20 $ 2,193

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP

NOTE:WhenHPLtopisspecified,thechassiswillbe

matchingTFL

EW Bead

EX Flair

EY Square


Standard


G1 NoGrommet

G3 Center-StandardBLKM Black




PDSW PaddleSwitch





NOTE:WhenHPLtopisspecified,thechassiswillbe

matchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|modesty|grommet|mechanism/grommet|controlpanel.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-2242HAB




Pulse Casegoods

WIRE MANAGEMENT TROUGH STANDARD FEATURES


WMT-23 23 4.5 2.25 3 1 $ 45

WMT-33 33.38 4.5 2.25 6 1 $ 67

WMT-44 43.5 4.5 2.25 9 1 $ 74

WMT-54 54.75 4.5 2.25 12 1 $ 90

HOW TO ORDER

MODEL NUMBER

WMT-23


Pulse Casegoods

DOUBLE PEDESTAL DESK STANDARD FEATURES

• Two Box Drawers

• Locking Pedestals

• Adjustable Levelers

• Optional Center Drawer (see page 517)

FULL PEDESTAL


4-6030FDP 28.25"W Kneespace 60 30 29.94 289 37 $ 1,967

4-6630FDP 34.25"W Kneespace 66 30 29.94 298 42 $ 2,104

4-7230FDP 40.25"W Kneespace 72 30 29.94 329 45 $ 2,112

4-7236FDP 40.25"W Kneespace 72 36 29.94 381 54 $ 2,118

• Recessed Modesty (3" on 30"D Desks, 9" on 36"D Desk)

• Three File Drawers (Letter or Legal)

3/4 PEDESTAL


4-6030DP 28.25"W Kneespace 60 30 29.94 255 37 $ 1,773

4-6630DP 34.25"W Kneespace 66 30 29.94 285 42 $ 1,829

4-7230DP 40.25"W Kneespace 72 30 29.94 315 45 $ 1,842

4-7236DP 40.25"W Kneespace 72 36 29.94 347 54 $ 1,851

• Recessed Modesty (3" on 30"D Desks, 9" on 36"D Desk)

• Two File Drawers (Letter or Legal)

BOW SHAPED WORKSURFACE


4-7236FDPB 40.25"W Kneespace 72 36 29.94 386 54 $ 2,579

• Recessed Modesty (3" at Ends, 9" at Bow)

• Three File Drawers (Letter or Legal)

• 30"D Ends

OPTIONS

Finish Edge Pull Pull Finish Grommet Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP

NOTE: When HPL top is specified, the chassis will

be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet - StandardG2 Right $73G4 Left $73G5 Right and Left $146

NOTE: For Grommet Finish

see page 437

Locking - Specifc Key

• Locks ordered separately see page K

LCK2 Requires 2 Lock Cores






be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull | pull finish | grommet | lock. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-6030FDP

\Finish Edge Pull Pull Finish Grommet Lock

CO2 EW Grip BWT G1 LCK2


Pulse Casegoods

TABLE DESK STANDARD FEATURES



4-6836TD 68 36 29.94 200 51 $ 1,944

OPTIONS

Finish Edge Modesty Fabric/Grade (if applicable) Leg


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

FR No Modesty - StandardGJ Laminate $162

Matte Silver-Framed

JX Frosted Insert $464KA Fabric Insert (specify

fabric-see pricing below)

Grade, Vendor, Pattern, Color Satin Nickel

MN with Ebony Feet - StandardMM with Casters $208






be matching TFL

EY Square

Modesty (KA - Fabric)yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

2.5 50 334 375 422 481 563 681 798 916 1,033 1,151 1,269 1,386 1,504 1,621 1,739 849 968 1,084

HOW TO ORDER SPECIFY: Finish | edge | modesty | textile pattern and color (if applicable) | leg. See page 436 for a full list of finishes and graded-in fabric options.

MODEL NUMBER

4-6836TD

Finish Edge Modesty Fabric/Grade (if applicable) Leg

CO2 EW FR Grade 3, Momentum, Hue, Smoke MN


Pulse Casegoods

P-SHAPED TABLE WORKSURFACE WITH END PANEL STANDARD FEATURES

• P-Shaped Worksurface Profiled on Rim, 36"W Side has Square Edge

• 12"H Laminate Modesty Panel

• 4" Metal Cylinder


• Cannot be Used as a Freestanding Unit


• Ships KD


4-7242EPTL/CB4 LEFT 72 42 29.94 198 18 $ 2,097

4-8442EPTL/CB4 LEFT 84 42 29.94 218 20 $ 2,484

• End Panel on Right

4-7242EPTR/CB4 RIGHT 72 42 29.94 198 18 $ 2,097

4-8442EPTR/CB4 RIGHT 84 42 29.94 218 20 $ 2,484

• End Panel on Left

OPTIONS

Finish Edge Base Finish Grommet Grommet Color


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet - StandardKP Grommet $73

G1 No Grommet - StandardLJ Black

LK Satin Nickel






be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | base finish | grommet | grommet color. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7242EPTL/CB4


CO2 EW BWT G1 G1


Pulse Casegoods

P-SHAPED TABLE WORKSURFACE STANDARD FEATURES

• Profiled on Rim, 36"W Side has Square Edge

• 29.9375"H with Base




4-7242LPT LEFT 72 42 1.13 125 9 $ 1,249

4-7242RPT RIGHT 72 42 1.13 125 9 $ 1,249

4-8442LPT LEFT 84 42 1.13 135 10 $ 1,620

4-8442RPT RIGHT 84 42 1.13 135 10 $ 1,620

• Use with 4-CB4 or 4-SB4 Base

• 84"W Requires a Modesty Panel or Additional Support

OPTIONS

Finish Edge


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP

NOTE: When HPL top is specified, the chassis will be matching TFL

EW Bead

EX Flair

EY Square


BL2 GR2 RW2 SG2 HPL Solid Color Laminate (10% upcharge)

BLP GRP RWP SGP Textured Laminate (10% upcharge)NG2 NH2

Textured Laminate (10% upcharge)NGP NHP


EY Square

HOW TO ORDER SPECIFY: Finish | edge. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7242LPT

Finish Edge

CO2 EW


Pulse Casegoods

BULLET SHAPED TABLE WORKSURFACE WITH END PANEL STANDARD FEATURES

• Bullet Shaped Worksurface Profiled on Rim

• 12"H Laminate Modesty Panel

• 4" Metal Cylinder




• Ships KD

• 30" and 36"W Side has Square Edge


4-6630EBTL/CB4 LEFT 66 30 29.94 123 12 $ 1,665

4-7236EBTL/CB4 LEFT 72 36 29.94 168 15 $ 1,711

4-8436EBTL/CB4 LEFT 84 36 29.94 202 17 $ 2,097

• End Panel on Right

4-6630EBTR/CB4 RIGHT 66 30 29.94 123 12 $ 1,665

4-7236EBTR/CB4 RIGHT 72 36 29.94 168 15 $ 1,711

4-8436EBTR/CB4 RIGHT 84 36 29.94 202 17 $ 2,097

• End Panel on Left

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP

NOTE: When HPL top is specified, the chassis will be

matching TFL

EW Bead

EX Flair

EY Square

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SBRZ Soft Bronze

H1F Warm Grey



LK Satin Nickel






matching TFL

EY Square


MODEL NUMBER

4-6630EBTL/CB4


CO2 EW BWT G1 G1


Pulse Casegoods

BULLET SHAPED TABLE WORKSURFACE STANDARD FEATURES

• Worksurface Profiled on Rim




• Use with 4-CB4 or 4-SB4 Base

• 30" and 36"D Side has Square Edge

• 84"W Requires a Modesty Panel or Additional Support


4-6630BT 66 30 1.13 84 6 $ 1,061

4-7236BT 72 36 1.13 95 6 $ 1,086

4-8436BT 84 36 1.13 125 7 $ 1,453

OPTIONS

Finish Edge


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square






EY Square


MODEL NUMBER

4-6630BT

Finish Edge

CO2 EW


Pulse Casegoods

BULLET AND P-SHAPED WORKSURFACE BASE STANDARD FEATURES

• Use on Bullet Table Worksurfaces 4-8436BT, 4-7236BT and 4-6630BT

• Use on P-Worksurfaces 4-8442LPT, 4-8442RPT and 4-7242LPT, 4-7242RPT

• Use on Cockpit Bullet Corner Tables 4-7248LBTF and 4-7248RBTF

• 4" Metal Cylinder Base



4-CB4 4 4 28.81 33 1 $ 320

OPTIONS

Base Finish

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SBRZ Soft Bronze

H1F Warm Grey

HOW TO ORDER SPECIFY: Base finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-CB4

Base Finish

BWT


Pulse Casegoods

OPTIONAL BASE FOR BULLET AND P-SHAPED WORKSURFACES STANDARD FEATURES

• Laminate Base • Adjustable Leveler


4-SB4 3.5 3.5 28.75 33 1 $ 759

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2

Flat CutVM2 MC2 LC2 BU2 BE2 MH2 LM2Textured Laminate (10% upcharge)NG2 NH2


BL2 FW2 GR2 RW2 SG2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP

Flat CutMGP CMP CHP BUP BEP HNP TMPTextured Laminate (10% upcharge)NGP NHP


BLP FWP GRP RWP SGP

HOW TO ORDER SPECIFY: Finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-SB4

Finish

CO2


Pulse Casegoods

MODESTY PANEL FOR BULLET AND P-SHAPED TABLES STANDARD FEATURES

LAMINATE


4-1245TMP 48 1 12 12 2 $ 200

• Use on 6630 Bullet Tables

4-1252TMP 51 1 12 14 2 $ 212

• Use on 7236 Bullet Tables, 7248 Cockpit Bullet Tables and 7242 P-Tables

4-1266TMP 63 1 12 18 3 $ 321

• Use on 8436 Bullet Tables and 8442 P-Tables


4-2930TEP 30 1 28.81 20 3 $ 289

• Use on 30"W Bullet Worksurfaces

4-2936TEP 36 1 28.81 26 3 $ 297

• Use on 36"W Bullet and P-Worksurfaces

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP

Flat CutMGP CMP CHP BUP BEP HNP TMPTextured Laminate (10% upcharge)NGP NHP


BLP FWP GRP RWP SGP


MODEL NUMBER

4-1245TMP

Finish

CO2


Pulse Casegoods

MODESTY PANEL FOR BULLET AND P-SHAPED TABLES STANDARD FEATURES



4-1245TMPG 48 0.75 12 12 2 $ 595

• Use on 6630 Bullet Tables

4-1252TMPG 51 0.75 12 14 2 $ 605

• Use on 7236 Bullet Tables, 7248 Cockpit Bullet Tables and 7242 P-Tables

4-1266TMPG 63 0.75 12 18 3 $ 645

• Use on 8436 Bullet Tables and 8442 P-Tables

• Matte Silver-Framed Frosted Insert

HOW TO ORDER

MODEL NUMBER

4-1245TMPG


Pulse Casegoods

DOOR CREDENZA STANDARD FEATURES

• Locking Pedestals • Adjustable Levelers

FULL PEDESTAL


4-6022FCRD 60 22 29.94 276 26 $ 2,047

4-6622FCRD 66 22 29.94 284 28 $ 2,077

4-7222FCRD 72 22 29.94 310 34 $ 2,224

• Four File Drawers (Letter or Legal)

• Adjustable Shelf Behind Doors

3/4 PEDESTAL


4-6622CRD 66 22 29.94 230 28 $ 1,782

4-7222CRD 72 22 29.94 255 34 $ 1,934

• Two Box Drawers


OPTIONS

Finish Edge Pull Pull Finish Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey









matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull | pull finish | lock. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-6022FCRD


CO2 EW Grip BWT LCK2


Pulse Casegoods

KNEESPACE CREDENZA STANDARD FEATURES

• Locking Pedestals • Adjustable Levelers

FULL PEDESTAL


4-6022FCR 60 22 29.94 230 26 $ 1,867

• 28.25"W Kneespace

4-6622FCR 66 22 29.94 245 28 $ 1,888


4-7222FCR 72 22 29.94 260 34 $ 1,977


3/4 PEDESTAL


4-6622CR 66 22 29.94 215 28 $ 1,636


4-7222CR 72 22 29.94 225 34 $ 1,773


• Four File Drawers (Letter or Legal)

• Two Box Drawers


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet

G2 Right $73G3 Center - StandardG4 Left $73G5 Right and Left $146G6 Right and Center $73G7 Left and Center $73G8 Right, Left and Center $146

NOTE: For Grommet Finish see

page 437









be matching TFL

EY Square


MODEL NUMBER

4-6022FCR




Pulse Casegoods

LATERAL FILE CREDENZA STANDARD FEATURES

• FourLateralFileDrawers(LetterorLegal) • DrawerFrontLockingwithAnti-TiltMechanism • AdjustableLevelers


4-6022CLF 60 22 29.94 281 30 $ 2,845

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


bematchingTFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT BoneWhite

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL LusterGrey

H1P OiledBronze

BKO Onyx

POLR Polar

SNCK SatinNickel

SBRZ SoftBronze

H1F WarmGrey

Locking -SpecifcKey

• LocksorderedseparatelyseepageK

LCK2 Requires2LockCores






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|pull|pullfinish|lock.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-6022CLF




Pulse Casegoods

BUFFET CREDENZA STANDARD FEATURES

• Two Drawers • Four Doors - Storage Space with Two Adjustable Shelves



4-7036BCC 71 20 36 314 37 $ 2,621

OPTIONS

Finish Edge Pull Pull FInish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey






EY Square

HOW TO ORDER SPECIFY: Finish | edge finish | edge | pull | pull finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7036BCC

Finish Edge Pull Pull Finish

CO2 EW Grip BWT


Pulse Casegoods

TRANSACTION COUNTER STANDARD FEATURES

• Profiled on User Side and Approach Sides • Optional Task Lights (see page 1082)


4-6614TC 66 14.13 14 95 9 $ 563

4-7214TC 72 14.13 14 110 10 $ 581

OPTIONS

Finish Edge


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square






EY Square


MODEL NUMBER

4-6614TC

Finish Edge

CO2 EW


Pulse Casegoods

HIGHBACK ORGANIZER STANDARD FEATURES

• Square Edge Only

• Six Hinged Doors

• Wire Management

• 23.9375"H Clearance

• Finished Back Unless W3 Toolbar Specified

• Optional Task Lights (see page 1082)

• Optional Work Tools to Use with Toolbar (see page 469)

yds com for optionmodel w d h wt cu ft W4 W5 list

4-9043HD6-2 90 15 42.5 260 43 1 2.75 $ 2,337

4-9643HD6-2 96 15 42.5 275 45 1 2.75 $ 2,538

4-10643HD6-2 106 15 42.5 285 46 1.25 3.25 $ 2,580

• NOTE: Optional Three Locks - available on door option JB only

OPTIONS

Finish Door Inside Back Panel Fabric/Grade (if applicable) Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

JB Laminate Panel - StandardJC Matte Silver-Framed Frosted Insert $333

W2 No Tackboard - Standard X9 No Fabric NL No Lock - Standard



LCK3 Requires 3 Lock

Cores $225

NOTE: NL - no lock must

be chosen when door JC is specified

W4 Tackboard/White Markerboard/Tackboard

W5 Tackboard/Toolbar/Tackboard

See pricing below

Grade, Vendor, Pattern,

Color

NOTE: Fabric must be tested

and approved for tackboard

use/compatibility

Fabric Tackboard W4yds sq ft comcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

1 n/a 754 770 789 813 846 893 940 987 1,034 1,081 1,128 1,175 1,222 1,269 1,316 n/a n/a n/a

1.25 n/a 758 779 802 831 873 931 990 1,049 1,108 1,167 1,225 1,284 1,343 1,402 1,460 n/a n/a n/a


2.75 n/a 996 1,041 1,093 1,158 1,248 1,377 1,507 1,636 1,765 1,895 2,024 2,153 2,283 2,412 2,541 n/a n/a n/a

3.25 n/a 1,003 1,056 1,118 1,194 1,301 1,454 1,607 1,759 1,912 2,065 2,218 2,371 2,524 2,676 2,829 n/a n/a n/a

HOW TO ORDER SPECIFY: Finish | door | inside back panel | textile pattern and color (if applicable) | lock. See page 436 for a full list of finishes and graded-in fabric options.

MODEL NUMBER

4-9043HD6-2


CO2 JB W2Grade 3, Momentum, Hue, Smoke

NL


Pulse Casegoods

HIGHBACK ORGANIZER STANDARD FEATURES


• Four Hinged Doors

• Wire Management


• Finished Back Unless W3 Toolbar Specified



yds com for optionmodel w d h wt cu ft W4 W5 list

4-6043HD4-2 60 15 42.5 189 27 0.75 1.75 $ 1,397

4-6643HD4-2 66 15 42.5 203 29 0.75 2 $ 1,467

4-7243HD4-2 72 15 42.5 215 32 0.75 2.25 $ 1,522

4-7843HD4-2 78 15 42.5 229 35 0.75 2.25 $ 1,849

4-8443HD4-2 84 15 42.5 242 37 0.75 2.5 $ 1,892

• NOTE: Optional Two Locks - available on door option JB only

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2

Flat CutVM2MC2

LC2BU2

BE2MH2

LM2

Textured Laminate (10% upcharge)NG2 NH2


BL2 FW2 GR2 RW2 SG2

JB Laminate Panel - StandardJC Matte Silver-Framed Frosted Insert $276

W2 No Tackboard - StandardW3 Toolbar in Back Panel/No Tackboard/

Unfinished Back $276

X9 No Fabric NL No Lock - Standard



LCK2 Requires 2 Lock Cores $150

NOTE: NL - no lock must be chosen when

door JC is specified

W4 Tackboard/White Markerboard/Tackboard

W5 Tackboard/Toolbar/Tackboard

See pricing below

Grade, Vendor, Pattern, Color

NOTE: Fabric must be tested

and approved for tackboard

use/compatibility


0.75 n/a 562 574 588 606 631 666 701 737 772 807 842 878 913 948 983 n/a n/a n/a


1.75 n/a 814 843 876 917 974 1,057 1,139 1,221 1,304 1,386 1,468 1,551 1,633 1,715 1,797 n/a n/a n/a

2 n/a 817 850 888 935 1,000 1,094 1,188 1,283 1,377 1,471 1,565 1,659 1,753 1,847 1,941 n/a n/a n/a

2.25 n/a 821 858 900 953 1,027 1,133 1,239 1,345 1,451 1,556 1,662 1,768 1,874 1,980 2,085 n/a n/a n/a

2.5 n/a 825 866 913 972 1,054 1,172 1,289 1,407 1,524 1,642 1,760 1,877 1,995 2,112 2,230 n/a n/a n/a

HOW TO ORDER SPECIFY: Finish | door | inside back panel | textile pattern and color (if applicable) | lock. See page 436 for a full list of finishes and graded-in fabric options.

MODEL NUMBER

4-6043HD4-2


CO2 JB W2Grade 3, Momentum, Hue, Smoke

NL


Pulse Casegoods

ONE-PIECE TACKBOARD STANDARD FEATURES

model w d h wt cu ft

FT1089 58.38 0.5 22.63 8 2

• Use with 4-6043HD4-2

yds sq ft comcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

2 n/a 414 447 485 532 597 691 785 880 974 1,068 1,162 1,256 1,350 1,444 1,538 n/a n/a n/a


FT1088 64.38 0.5 22.63 9 2



2 n/a 431 464 502 549 614 708 802 897 991 1,085 1,179 1,273 1,367 1,461 1,555 n/a n/a n/a


FT1087 70.38 0.5 22.63 10 2



2.25 n/a 433 470 512 565 639 745 851 957 1,063 1,168 1,274 1,380 1,486 1,592 1,697 n/a n/a n/a


FT1086 76.38 0.5 22.63 11 2



2.5 n/a 459 500 547 606 688 806 923 1,041 1,158 1,276 1,394 1,511 1,629 1,746 1,864 n/a n/a n/a


FT1085 82.38 0.5 22.63 12 2



2.5 n/a 459 500 547 606 688 806 923 1,041 1,158 1,276 1,394 1,511 1,629 1,746 1,864 n/a n/a n/a


FT1084 88.38 0.5 22.63 15 2



2.75 n/a 651 696 748 813 903 1,032 1,162 1,291 1,420 1,550 1,679 1,808 1,938 2,067 2,196 n/a n/a n/a


FT1082 94.38 0.5 22.63 15 2



3 n/a 673 722 779 849 948 1,089 1,230 1,371 1,512 1,653 1,795 1,936 2,077 2,218 2,359 n/a n/a n/a

OPTIONS

Fabric/Grade


NOTE: Fabric must be tested and approved

for tackboard use/compatibility

HOW TO ORDER SPECIFY: Textile pattern and color. See page 436 for a full list of our graded-in fabric options.

MODEL NUMBER

FT1089

Fabric/Grade

Grade 3, Momentum, Hue, Smoke


Pulse Casegoods

TWO-PIECE TACKBOARD STANDARD FEATURES

• Two 52.1875"W Pieces • Use with 4-10643HD6-2 • Set of Two


FT1080 104.38 0.5 22.63 16 2


3.25 n/a 693 746 808 884 991 1,144 1,297 1,449 1,602 1,755 1,908 2,061 2,214 2,366 2,519 n/a n/a n/a

OPTIONS

Fabric/Grade





MODEL NUMBER

FT1080

Fabric/Grade



Pulse Casegoods

WALLMOUNT ORGANIZER STANDARD FEATURES

• Organizer has Square Edge Only • Optional Task Lights (see page 1082)


4-3021HDW2 30 15 18.63 120 10 $ 643

4-3621HDW2 36 15 18.63 130 11 $ 740

4-4221HDW2 42 15 18.63 140 12 $ 850

• Two Hinged Doors

• NOTE: Optional One Lock - available on door option JB only


4-4821HDW3 48 15 18.63 150 13 $ 1,130

• Three Hinged Doors



4-6021HDW4 60 15 18.63 160 14 $ 1,331

• Use with 60"W Credenzas

4-6621HDW4 66 15 18.63 170 15 $ 1,352


4-7221HDW4 72 15 18.63 185 16 $ 1,384



• Four Hinged Doors

OPTIONS

Finish Door Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

JB Laminate Panel - StandardJC Matte Silver-Framed Frosted Insert

Two Hinged Doors $160Three and Four Hinged Doors $257

NL No Lock - Standard



LCK1 Requires 1 Lock Core

4-3021HDW2 $75 4-3621HDW2 $75 4-4221HDW2 $75LCK2 Requires 2 Lock Cores

4-4821HDW3 $150 4-6021HDW4 $150 4-6621HDW4 $150 4-7221HDW4 $150

NOTE: NL - no lock must be chosen when door JC is specified

HOW TO ORDER SPECIFY: Finish | door | lock. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3021HDW2

Finish Door Lock

CO2 JB NL


Pulse Casegoods

WALLMOUNT SHELF STANDARD FEATURES



4-3019HSW 30 14 18.63 40 9 $ 619

4-3619HSW 36 14 18.63 45 10 $ 711

4-4219HSW 42 14 18.63 50 10 $ 816

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-3019HSW

Finish

CO2


Pulse Casegoods


• Cannot be Used as Stand Alone or Mounted Directly to Wall

• Must be Used with a Wallmount Unit


FT2076 30 0.5 23.75 5 2

• Use with 30"W Wallmount Units


1.25 n/a 370 391 414 443 485 543 602 661 720 779 837 896 955 1,014 1,072 n/a n/a n/a


FT2075 36 0.5 23.75 6 n/a n/a n/a



1.5 n/a 380 405 433 468 518 588 659 729 800 870 941 1,011 1,082 1,152 1,223 n/a n/a n/a


FT2074 42 0.5 23.75 7 2



1.5 n/a 391 416 444 479 529 599 670 740 811 881 952 1,022 1,093 1,163 1,234 n/a n/a n/a


FT2073 48 0.5 23.75 8 2



1.75 n/a 394 423 456 497 554 637 719 801 884 966 1,048 1,131 1,213 1,295 1,377 n/a n/a n/a


FT2071 60 0.5 23.75 9 2

• Use with 60"W or Two 30"W Wallmount Units


2 n/a 419 452 490 537 602 696 790 885 979 1,073 1,167 1,261 1,355 1,449 1,543 n/a n/a n/a


FT2070 66 0.5 23.75 10 2



2.25 n/a 433 470 512 565 639 745 851 957 1,063 1,168 1,274 1,380 1,486 1,592 1,697 n/a n/a n/a


FT2069 72 0.5 23.75 11 2



2.5 n/a 436 477 524 583 665 783 900 1,018 1,135 1,253 1,371 1,488 1,606 1,723 1,841 n/a n/a n/a

OPTIONS

Fabric/Grade





MODEL NUMBER

FT2076

Fabric/Grade



Pulse Casegoods


• Cannot be Used as Stand Alone or Mounted Directly to Wall

• Must be Used with a Wallmount Unit


FT2139 84 0.5 23.75 13 2

• Use with Two 42"W Wallmount Units


2.75 n/a 541 586 638 703 793 922 1,052 1,181 1,310 1,440 1,569 1,698 1,828 1,957 2,086 n/a n/a n/a


FT2136 96 0.5 23.75 15 2



3 n/a 680 729 786 856 955 1,096 1,237 1,378 1,519 1,660 1,802 1,943 2,084 2,225 2,366 n/a n/a n/a

OPTIONS

Fabric/Grade





MODEL NUMBER

FT2139

Fabric/Grade



Pulse Casegoods

TACKBOARD/TOOLBAR/TACKBOARD STANDARD FEATURES

• Powder Coated Metal Toolbar • Side Powder Coated Metal Accents Provide Wire Management



FTS2106 42 2 23.75 38 2



1.5 n/a 937 962 990 1,025 1,075 1,145 1,216 1,286 1,357 1,427 1,498 1,568 1,639 1,709 1,780 n/a n/a n/a


FTS2105 48 2 23.75 42 2



1.5 n/a 937 962 990 1,025 1,075 1,145 1,216 1,286 1,357 1,427 1,498 1,568 1,639 1,709 1,780 n/a n/a n/a


FTS2020 54 2 23.75 44 2



2 n/a 972 1,005 1,043 1,090 1,155 1,249 1,343 1,438 1,532 1,626 1,720 1,814 1,908 2,002 2,096 n/a n/a n/a


FTS2019 60 2 23.75 48 3



2 n/a 1,011 1,044 1,082 1,129 1,194 1,288 1,382 1,477 1,571 1,665 1,759 1,853 1,947 2,041 2,135 n/a n/a n/a


FTS2018 66 2 23.75 50 3



2.25 n/a 1,033 1,070 1,112 1,165 1,239 1,345 1,451 1,557 1,663 1,768 1,874 1,980 2,086 2,192 2,297 n/a n/a n/a


FTS2017 72 2 23.75 52 5



2.5 n/a 1,059 1,100 1,147 1,206 1,288 1,406 1,523 1,641 1,758 1,876 1,994 2,111 2,229 2,346 2,464 n/a n/a n/a


FTS2015 84 2 23.75 58 6



2.75 n/a 1,207 1,252 1,304 1,369 1,459 1,588 1,718 1,847 1,976 2,106 2,235 2,364 2,494 2,623 2,752 n/a n/a n/a


FTS2012 96 2 23.75 64 9



3 n/a 1,437 1,486 1,543 1,613 1,712 1,853 1,994 2,135 2,276 2,417 2,559 2,700 2,841 2,982 3,123 n/a n/a n/a

TT

OPTIONS

Fabric/Grade





MODEL NUMBER

FTS2106

Fabric/Grade



Pulse Casegoods

TACKBOARD/MARKERBOARD/TACKBOARD STANDARD FEATURES

• Side Powder Coated Metal Accents Provide Wire Management

• White Laminate Markerboard

• Support Rails Included for Mounting to Wall



FTM2087 42 2 23.75 36 2



1 n/a 874 890 909 933 966 1,013 1,060 1,107 1,154 1,201 1,248 1,295 1,342 1,389 1,436 n/a n/a n/a


FTM2086 48 2 23.75 40 2



1 n/a 874 890 909 933 966 1,013 1,060 1,107 1,154 1,201 1,248 1,295 1,342 1,389 1,436 n/a n/a n/a


FTM2020 54 2 23.75 44 2



1.25 n/a 902 923 946 975 1,017 1,075 1,134 1,193 1,252 1,311 1,369 1,428 1,487 1,546 1,604 n/a n/a n/a


FTM2019 60 2 23.75 48 3



1.25 n/a 918 939 962 991 1,033 1,091 1,150 1,209 1,268 1,327 1,385 1,444 1,503 1,562 1,620 n/a n/a n/a


FTM2018 66 2 23.75 50 3


yds sq ft com

com (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

1.25 n/a 943 964 987 1,016 1,058 1,116 1,175 1,234 1,293 1,352 1,410 1,469 1,528 1,587 1,645 n/a n/a n/a


FTM2017 72 2 23.75 52 5



1.5 n/a 976 1,001 1,029 1,064 1,114 1,184 1,255 1,325 1,396 1,466 1,537 1,607 1,678 1,748 1,819 n/a n/a n/a


FTM2015 84 2 23.75 58 6



1.5 n/a 1,119 1,144 1,172 1,207 1,257 1,327 1,398 1,468 1,539 1,609 1,680 1,750 1,821 1,891 1,962 n/a n/a n/a


FTM2012 96 2 23.75 64 9



2.25 n/a 1,361 1,398 1,440 1,493 1,567 1,673 1,779 1,885 1,991 2,096 2,202 2,308 2,414 2,520 2,625 n/a n/a n/a

TM

T

OPTIONS

Fabric/Grade





MODEL NUMBER

FTM2087

Fabric/Grade



Pulse Casegoods

TACKBOARD/MARKERBOARD/TACKBOARD WITH TOOLBAR/TACKBOARD STANDARD FEATURES

• PowderCoatedMetalToolbar

• SidePowderCoatedMetalAccentsProvideWireManagement

• WhiteLaminateMarkerboard

• SupportRailsIncludedforMountingtoWall

• OptionalWorkToolstoUsewithToolbar(seepage469)


FTMS2098 42 2 23.75 38 2

• Usewith42"WWallmountUnits


1.5 n/a 1,101 1,126 1,154 1,189 1,239 1,309 1,380 1,450 1,521 1,591 1,662 1,732 1,803 1,873 1,944 n/a n/a n/a


FTMS2097 48 2 23.75 42 2



2 n/a 1,101 1,134 1,172 1,219 1,284 1,378 1,472 1,567 1,661 1,755 1,849 1,943 2,037 2,131 2,225 n/a n/a n/a


FTMS2020 54 2 23.75 44 2



2 n/a 1,135 1,168 1,206 1,253 1,318 1,412 1,506 1,601 1,695 1,789 1,883 1,977 2,071 2,165 2,259 n/a n/a n/a


FTMS2019 60 2 23.75 48 3

• Usewith60"WorTwo30"WWallmountUnits


2 n/a 1,161 1,194 1,232 1,279 1,344 1,438 1,532 1,627 1,721 1,815 1,909 2,003 2,097 2,191 2,285 n/a n/a n/a


FTMS2018 66 2 23.75 50 3



2.25 n/a 1,193 1,230 1,272 1,325 1,399 1,505 1,611 1,717 1,823 1,928 2,034 2,140 2,246 2,352 2,457 n/a n/a n/a


FTMS2017 72 2 23.75 52 5

• Usewith72"WorTwo36"WWallmountUnits


2.5 n/a 1,265 1,306 1,353 1,412 1,494 1,612 1,729 1,847 1,964 2,082 2,200 2,317 2,435 2,552 2,670 n/a n/a n/a


FTMS2015 84 2 23.75 58 6

• UsewithTwo42"WWallmountUnits


2.75 n/a 1,348 1,393 1,445 1,510 1,600 1,729 1,859 1,988 2,117 2,247 2,376 2,505 2,635 2,764 2,893 n/a n/a n/a


FTMS2012 96 2 23.75 64 9

• UsewithTwo48"WWallmountUnits


3 n/a 1,596 1,645 1,702 1,772 1,871 2,012 2,153 2,294 2,435 2,576 2,718 2,859 3,000 3,141 3,282 n/a n/a n/a

TM

T

T

OPTIONS

Fabric/Grade

Grade,Vendor,Pattern,Color

NOTE:Fabricmustbetestedandapproved

fortackboarduse/compatibility

HOW TO ORDER SPECIFY:Textilepatternandcolor.Seepage436forafulllistofourgraded-infabricoptions.

MODEL NUMBER

FTMS2098

Fabric/Grade



Pulse Casegoods

SLAT RAIL ACCESSORIES STANDARD FEATURES

• Metal • Warm Silver Finish

PAPER CLIP HOLDER


SM2-10 3.25 2.25 1.63 1 0.1 $ 56

PENCIL CUP


SM2-30 3.75 2.38 3.25 1 0.1 $ 56

SMALL TRAY


SM2-40 7.88 5.5 1.5 2 0.2 $ 56

POST-IT-NOTE TRAY


SM2-60 3.5 3.5 1.5 1 0.1 $ 56

FOLDER TRAY


SM2-70 12.5 9.13 4.5 3 1 $ 86

LARGE PAPER TRAY


SM2-80 12.5 9.13 2.75 3 1 $ 92

• With Slots for Hanging Tray SM2-90

HANGING PAPER TRAY


SM2-90 12.5 9.13 2.75 3 1 $ 104

• Hangs Under Large Paper Tray SM2-80

HOW TO ORDER

MODEL NUMBER

SM2-10


Pulse Casegoods

WALLMOUNT STORAGE BOX STANDARD FEATURES

• For Wallmounted Application Only, Includes Mounting Bracket to Install

• Unfinished Back


4-3010SBW 30 13 10 26 4 $ 697

4-3610SBW 36 13 10 30 4 $ 717

4-4210SBW 42 13 10 34 5 $ 761

• Two Openings


4-4810SBW 48 13 10 40 5 $ 789

• Three Openings


4-5410SBW2 54 13 10 43 6 $ 738

4-6010SBW2 60 13 10 47 7 $ 815

4-6610SBW2 66 13 10 51 7 $ 850

4-7210SBW2 72 13 10 55 8 $ 870

4-7810SBW2 78 13 10 59 9 $ 884

4-8410SBW2 84 13 10 63 9 $ 959

• Two Openings


4-5410SBW 54 13 10 45 6 $ 805

4-6010SBW 60 13 10 49 7 $ 881

4-6610SBW 66 13 10 53 7 $ 917

4-7210SBW 72 13 10 57 8 $ 935

4-7810SBW 78 13 10 61 9 $ 952

4-8410SBW 84 13 10 65 9 $ 1,024

• Four Openings


4-9010SBW 90 13 10 71 10 $ 1,129

4-9410SBW 94 13 10 73 10 $ 1,179

4-9610SBW 96 13 10 75 11 $ 1,206

4-10010SBW 100 13 10 79 11 $ 1,474

4-10610SBW 106 13 10 84 12 $ 1,562

• Six Openings

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-3010SBW

Finish

CO2


Pulse Casegoods

LAYERING WORKSURFACE STORAGE BOX STANDARD FEATURES

• Creates a Layered Worksurface Option for Transition from Seated Heads Down Work to Standing Meeting and Collaboration

• Finished Back


4-3010SB 30 13 10 26 4 $ 697

4-3610SB 36 13 10 30 4 $ 717

4-4210SB 42 13 10 34 5 $ 761

• Two Openings

• Rests Directly on Worksurfaces


4-4810SB 48 13 10 40 5 $ 789

• Three Openings

• Rests Directly on Worksurfaces


4-5410SB2 54 13 10 43 6 $ 738

4-6010SB2 60 13 10 47 7 $ 815

4-6610SB2 66 13 10 51 7 $ 850

4-7210SB2 72 13 10 55 8 $ 870

4-7810SB2 78 13 10 59 9 $ 884

4-8410SB2 84 13 10 63 9 $ 959

• Two Openings

• Spans on Worksurface of Two Separate Worksurfaces with a 48"W Maximum Span of Unsupported Space


4-5410SB 54 13 10 45 6 $ 805

4-6010SB 60 13 10 49 7 $ 881

4-6610SB 66 13 10 53 7 $ 917

4-7210SB 72 13 10 57 8 $ 935

4-7810SB 78 13 10 61 9 $ 952

4-8410SB 84 13 10 65 9 $ 1,024

• Four Openings



4-9010SB 90 13 10 71 10 $ 1,129

4-9410SB 94 13 10 73 10 $ 1,179

4-9610SB 96 13 10 75 11 $ 1,206

4-10010SB 100 13 10 79 11 $ 1,474

4-10610SB 106 13 10 84 12 $ 1,562

• Six Openings


OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-3010SB

Finish

CO2


Pulse Casegoods

WALL SHELF STANDARD FEATURES

• Mounting Hardware Included • NOTE: 5 lb. weight restriction per linear foot


4-1208WS 12 8 1 3 1 $ 298

4-3008WS 30 8 1 7 1 $ 316

4-3608WS 36 8 1 9 1 $ 321

4-4208WS 42 8 1 11 1 $ 331

4-4808WS 48 8 1 13 1 $ 336

4-5408WS 54 8 1 15 2 $ 375

4-6008WS 60 8 1 17 2 $ 381

4-6608WS 66 8 1 19 2 $ 387

4-7208WS 72 8 1 21 2 $ 393

OPTIONS

Finish Paper Stop


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

X9 No Paper Stop - StandardB3Z Paper Stop $74

HOW TO ORDER SPECIFY: Finish | paper stop. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-1208WS

Finish Paper Stop

CO2 X9


Pulse Casegoods

STORAGE WARDROBE STANDARD FEATURES


HINGED


4-7216LSW LEFT 15.63 24 72.5 112 23 $ 1,545

4-7216RSW RIGHT 15.63 24 72.5 112 23 $ 1,545

• Full Length Storage with Hanging Bar

• One Adjustable Shelf

• Finished Back



4-7230SW 30 24 72.5 205 40 $ 2,144

4-7236SW 36 24 72.5 217 43 $ 2,205

LEFT SIDE:

• Three Adjustable Shelves

• One Stationary Shelf

RIGHT SIDE:



• Finished Back


OPTIONS

Finish Pull Pull Finish Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





4-7216LSW $75 4-7216RSW $75LCK2 Requires 2 Lock Cores

4-7230SW $150 4-7236SW $150

HOW TO ORDER SPECIFY: Finish | pull | pull finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7216LSW


CO2 Grip BWT NL


Pulse Casegoods

STORAGE CABINET WITH LATERAL FILE STANDARD FEATURES

• Square Edge Only TOP SECTION:

• Two Adjustable Shelves

• Finished Back

BOTTOM SECTION:

• Two Lateral File Drawers (Letter or Legal)

• Central Locking with Anti-Tilt Mechanism



4-7230SCL 30 24 72.5 235 40 $ 2,580

4-7236SCL 36 24 72.5 247 43 $ 2,621

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey




HOW TO ORDER SPECIFY: Finish | pull | pull finish | lock. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7230SCL


CO2 Grip BWT LCK1


Pulse Casegoods

LATERAL FILE STANDARD FEATURES

• Drawer Front Mounted Gang Lock with Anti-Tilt • Adjustable Levelers


4-3022LF2 30 22 29.94 176 15 $ 1,154

4-3622LF2 36 22 29.94 189 18 $ 1,217

• Two Drawers (Letter or Legal)


4-3056LF4 30 22 57.69 272 28 $ 2,216

4-3656LF4 36 22 57.69 285 33 $ 2,254

• Four Drawers (Letter or Legal)

OPTIONS

Finish Edge Pull Pull FInish Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey









be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull | pull finish | lock. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3022LF2




Pulse Casegoods

BOOKCASE ORGANIZER AND BOOKCASE STANDARD FEATURES

BOOKCASE ORGANIZER


4-3043BC2 30 14 42.5 71 16 $ 727

4-3643BC2 36 14 42.5 76 28 $ 759




BOOKCASE


4-3030BC 30 14 29.94 78 10 $ 795



4-3048BC 30 14 48.5 103 16 $ 877



4-3060BC 30 14 60.5 112 20 $ 1,003


• Two Stationary Shelves

4-3072BC 30 14 72.5 150 23 $ 1,134



BOOKCASE


4-3630BC 36 14 29.94 81 11 $ 850



4-3648BC 36 14 48.5 106 18 $ 1,095



4-3660BC 36 14 60.5 114 22 $ 1,182



4-3672BC 36 14 72.5 153 26 $ 1,374






OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-3043BC2

Finish

CO2


Pulse Casegoods

MOBILE PEDESTAL STANDARD FEATURES

• One File Drawer (Letter or Legal)


4-1621MP 15.63 20.75 25.31 95 9 $ 992


• One Box Drawer

• Locking Pedestal

• Casters

WITH CUSHION


4-1621MPC 15.63 20.75 20.94 116 6

• One Tray Drawer

• Locking File Drawer

• Seat Cushion

• Casters

yds sq ft com colcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

1 20 994 1,010 1,029 1,053 1,086 1,133 1,180 1,227 1,274 1,321 1,368 1,415 1,462 1,509 1,556 1,217 1,264 1,311

OPTIONS

Finish Pull Pull Finish Lock Fabric/Grade (4-1621MPC only)


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





HOW TO ORDER SPECIFY: Finish | pull | pull finish | lock | fabric (if applicable). See page 436 for a full list of finishes and graded-in fabric options.

MODEL NUMBER

4-1621MP

Finish Pull Pull Finish Lock Fabric/Grade (4-1621MPC only)

CO2 Grip BWT LCK1 Grade 3, Momentum, Hue, Smoke


Pulse Casegoods

CONFIGURATIONS - RIGHT L

w d h list

Total Unit Dimensions 72 84 29.94 Unit Total $ 3,040

CONSISTS OF:


4-7236FLPD 72 36 29.94 305 54 $ 1,812

• 9" Recessed Modesty

• Two Box Drawers






4-2248FRPR RIGHT 22 48 29.94 161 21 $ 1,228




• Cannot Be Used with Cockpit Corner Unit

DESK

RETURN

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7236FLPD


4-2248FRPR

G1 No Grommet



page 437









be matching TFL

EY Square


MODEL NUMBER

4-7236FLPD




Pulse Casegoods

CONFIGURATIONS - RIGHT U

w d h list


CONSISTS OF:


4-7236FLPD 72 36 29.94 305 54 $ 1,812


• Two Box Drawers






4-2248BR 22 48 29.94 100 7 $ 546

• Hinged Modesty with Latches



4-7222FCRR 72 22 29.94 220 34 $ 1,465




DESK

BRIDGE

CREDENZA

OPTIONS

Finish EdgePull (4-7236FLPD and 4-7222FCRR only) Pull Finish Grommet

Grommet Color (4-2248BR only)

Lock (4-7236FLPD and 4-7222FCRR only)


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7236FLPD


4-2248FRPR

G1 No Grommet



page 437

G1 No Grommet

LJ Black

LK Satin Nickel









be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull (if applicable) | pull finish (if applicable) | grommet | grommet color (if applicable) | lock (if applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7236FLPD

Finish EdgePull (4-7236FLPD and 4-7222FCRR only) Pull Finish Grommet

Grommet Color (4-2248BR only)

Lock (4-7236FLPD and 4-7222FCRR only)

CO2 EW Grip BWT G1 G1 LCK2


Pulse Casegoods

CONFIGURATIONS - DESK COCKPIT RIGHT U

w d h list


CONSISTS OF:


4-7248LPDC 72 48 29.94 310 66 $ 2,580


• Two Box Drawers





4-4852RCU RIGHT 48 52 29.94 183 45 $ 1,906

• Grommet in Worksurface

• 10"W Storage Shelf

• Grain Runs Parallel to 48"W Side

• Grain Runs Against 52"D Side



4-4222FRPRC RIGHT 42 22 29.94 150 19 $ 1,172




• Use with 4-4852RCU Corner Unit Only

DESK

CORNER UNIT

RETURN

OPTIONS

Finish Edge

Pull (4-7248LPDC and 4-4222FRPRC only) Pull FInish

Grommet (4-7248LPDC and 4-4222FRPRC only)

Grommet Color (4-4852RCU only)

Lock (4-7248LPDC and 4-4222FRPRC only)


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDC


4-4222FRPRC

G1 No Grommet



page 437

LJ Black

LK Satin Nickel









be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7248LPDC

Finish Edge

Pull (4-7248LPDC and 4-4222FRPRC only) Pull Finish

Grommet (4-7248LPDC and 4-4222FRPRC only)


Lock (4-7248LPDC and 4-4222FRPRC only)



Pulse Casegoods

FULL SINGLE PEDESTAL DESK STANDARD FEATURES

• Two Box Drawers






4-6630FLPD LEFT 66 30 29.94 265 42 $ 1,691

4-7230FLPD LEFT 72 30 29.94 285 45 $ 1,753

4-6630FRPD RIGHT 66 30 29.94 265 42 $ 1,691

4-7230FRPD RIGHT 72 30 29.94 285 45 $ 1,753



4-7236FLPD LEFT 72 36 29.94 305 54 $ 1,812

4-7236FRPD RIGHT 72 36 29.94 305 54 $ 1,812


BOW SHAPED WORKSURFACE


4-7236FLPDB LEFT 72 36 29.94 353 54 $ 2,247

4-7236FRPDB RIGHT 72 36 29.94 353 54 $ 2,247

• Recessed Modesty 3" at Ends, 9" at Bow

• 30"W End Panel

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey



see page 437









be matching TFL

EY Square


MODEL NUMBER

4-6630FLPD




Pulse Casegoods

3/4 SINGLE PEDESTAL DESK STANDARD FEATURES

• One Box Drawer






4-6630LPD LEFT 66 30 29.94 225 42 $ 1,499

4-7230LPD LEFT 72 30 29.94 245 45 $ 1,523

4-6630RPD RIGHT 66 30 29.94 225 42 $ 1,499

4-7230RPD RIGHT 72 30 29.94 245 45 $ 1,523


4-7236LPD LEFT 72 36 29.94 265 54 $ 1,545

4-7236RPD RIGHT 72 36 29.94 265 54 $ 1,545



OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey



see page 437









be matching TFL

EY Square


MODEL NUMBER

4-6630LPD




Pulse Casegoods

COCKPIT BULLET SHAPED CORNER STANDARD FEATURES

• BulletShapedWorksurfaceProfiledonRim,48"WSidehasSquareEdge

• CornerUnitExtension

• OneEndPanel

• AdjustableLevelers

• CannotbeUsedasaFreestandingUnit

• MustbeOrderedwith4-CB4or4-SB4



4-7248LBTF LEFT 72 48 29.94 168 11 $ 1,331

4-7248RBTF RIGHT 72 48 29.94 168 11 $ 1,331

OPTIONS

Finish Edge Grommet Grommet Color


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


bematchingTFL

EW Bead

EX Flair

EY Square

G1 NoGrommet-StandardKP Grommet$73

G1 NoGrommet-StandardLJ Black

LK SatinNickel






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|grommet|grommetcolor.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-7248LBTF


CO2 EW G1 G1


Pulse Casegoods

TABLE STANDARD FEATURES

• OneEndPanel

• 12"LaminateModestyPanel

• 4"MetalCylinderBase



• OptionalCenterDrawer(see83)

• ShipsKD

BULLET SHAPED WORKSURFACE


4-6630EBTL/CB4 LEFT 66 30 29.94 123 12 $ 1,665

4-7236EBTL/CB4 LEFT 72 36 29.94 168 15 $ 1,711

4-8436EBTL/CB4 LEFT 84 36 29.94 202 17 $ 2,097

• EndPanelonRight

4-6630EBTR/CB4 RIGHT 66 30 29.94 123 12 $ 1,665

4-7236EBTR/CB4 RIGHT 72 36 29.94 168 15 $ 1,711

4-8436EBTR/CB4 RIGHT 84 36 29.94 202 17 $ 2,097

• EndPanelonLeft

• BulletShapedWorksurfaceProfiledonRim

• 30"and36"WSideshaveSquareEdge

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


bematchingTFL

EW Bead

EX Flair

EY Square

BWT BoneWhite

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL LusterGrey

H1P OiledBronze

BKO Onyx

POLR Polar

SBRZ SoftBronze

H1F WarmGrey



LK SatinNickel






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|basefinish|grommet|grommetcolor.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-6630EBTL/CB4


CO2 EW BWT G1 G1


Pulse Casegoods

TABLE STANDARD FEATURES

• OneEndPanel

• 12"LaminateModestyPanel

• 4"MetalCylinderBase



• OptionalCenterDrawer(see83)

• ShipsKD

P-SHAPED WORKSURFACE


4-7242EPTL/CB4 LEFT 72 42 29.94 198 18 $ 2,097

4-8442EPTL/CB4 LEFT 84 42 29.94 218 20 $ 2,484

• EndPanelonRight

4-7242EPTR/CB4 RIGHT 72 42 29.94 198 18 $ 2,097

4-8442EPTR/CB4 RIGHT 84 42 29.94 218 20 $ 2,484

• EndPanelonLeft

• P-ShapedWorksurfaceProfiledonRim

• 36"WSidehasSquareEdge

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


bematchingTFL

EW Bead

EX Flair

EY Square

BWT BoneWhite

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL LusterGrey

H1P OiledBronze

BKO Onyx

POLR Polar

SBRZ SoftBronze

H1F WarmGrey



LK SatinNickel






bematchingTFL

EY Square

HOW TO ORDER SPECIFY:Finish|edge|basefinish|grommet|grommetcolor.Seepage436foracompleteofferingoffinishes.

MODEL NUMBER

4-7242EPTL/CB4


CO2 EW BWT G1 G1


Pulse Casegoods

CORNER UNIT STANDARD FEATURES

• Grain Runs from Front to Back - Perpendicular to User Side

• User Side Profiled. Connecting End and Backs are Flat.




• Use with Short Grain Modular Worksurfaces, Bridges and Returns


4-3636CU 36 36 29.94 134 28 $ 1,440

• 7.5"W Storage Shelf

4-4242CU 42 42 29.94 185 37 $ 1,598


OPTIONS

Finish Edge Grommet Color


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square

LJ Black

LK Satin Nickel






EY Square

HOW TO ORDER SPECIFY: Finish | edge | grommet color. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3636CU

Finish Edge Grommet Color

CO2 EW LJ


Pulse Casegoods

RETURN STANDARD FEATURES

• Locking Pedestal • Adjustable Levelers • Cannot be Used with Cockpit Corner Unit


4-2242FLPR LEFT 22 42 29.94 150 19 $ 1,172

4-2248FLPR LEFT 22 48 29.94 161 21 $ 1,228

4-2242FRPR RIGHT 22 42 29.94 150 19 $ 1,172

4-2248FRPR RIGHT 22 48 29.94 161 21 $ 1,228

3/4 PEDESTAL


4-2242LPR LEFT 22 42 29.94 135 19 $ 992

4-2248LPR LEFT 22 48 29.94 146 21 $ 1,095

4-2242RPR RIGHT 22 42 29.94 135 19 $ 992

4-2248RPR RIGHT 22 48 29.94 146 21 $ 1,095


• One Box Drawer


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet



page 437









be matching TFL

EY Square


MODEL NUMBER

4-2242FLPR




Pulse Casegoods

BRIDGE STANDARD FEATURES

• Hinged Modesty with Latches • Adjustable Levelers


4-2242BR 22 42 29.94 89 6 $ 525

4-2248BR 22 48 29.94 100 7 $ 546

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


matching TFL

EW Bead

EX Flair

EY Square

G1 No Grommet



LK Satin Nickel






matching TFL

EY Square


MODEL NUMBER

4-2242BR


CO2 EW G1 G1


Pulse Casegoods

SINGLE PEDESTAL CREDENZA STANDARD FEATURES

• Locking Pedestal • Adjustable Levelers

FULL PEDESTAL


4-6022FCRL LEFT 60 22 29.94 200 26 $ 1,433

4-6622FCRL LEFT 66 22 29.94 210 28 $ 1,453

4-7222FCRL LEFT 72 22 29.94 220 34 $ 1,465

4-6022FCRR RIGHT 60 22 29.94 200 26 $ 1,433

4-6622FCRR RIGHT 66 22 29.94 210 28 $ 1,453

4-7222FCRR RIGHT 72 22 29.94 220 34 $ 1,465

3/4 PEDESTAL


4-6622CRL LEFT 66 22 29.94 185 28 $ 1,304

4-7222CRL LEFT 72 22 29.94 195 34 $ 1,370

4-6622CRR RIGHT 66 22 29.94 185 28 $ 1,304

4-7222CRR RIGHT 72 22 29.94 195 34 $ 1,370


• One Box Drawer


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet



page 437









be matching TFL

EY Square


MODEL NUMBER

4-6022FCRL




Pulse Casegoods

SINGLE PEDESTAL CREDENZA STANDARD FEATURES


LATERAL FILE


4-7222CRLL LEFT 72 22 29.94 230 34 $ 1,895

4-7222CRRL RIGHT 72 22 29.94 230 34 $ 1,895



MULTI FILE


4-7222CRLM 72 22 29.94 230 34 $ 1,974

4-7222CRRM 72 22 29.94 230 34 $ 1,974

• Two Box Drawers


• One Lateral File Drawer (Letter or Legal)

• Locking File and Lateral File Drawers

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet



page 437









be matching TFL

EY Square


MODEL NUMBER

4-7222CRLL




Pulse Casegoods

CONFIGURATIONS - RECEPTION STATION

w d h list

Total Unit Dimensions 89.75 89.75 44.5 Unit Total $ 5,157

CONSISTS OF:


4-4242CUW 41.75 41.75 44 193 47 $ 1,879

• Grain Runs from Side to Side - Parallel to User Side




• Transaction Counter


4-4822LPRW LEFT 48 22.5 44 201 30 $ 1,639





• Long Grain


4-4822RPRW RIGHT 48 22.5 44 201 30 $ 1,639

• Two Box Drawers





• Long Grain

CORNER UNIT

RETURN

RETURN

OPTIONS

Finish EdgePull (4-4822LPRW and 4-4822RPRW only) Pull Finish

Grommet (4-4822LPRW and 4-4822RPRW only)

Grommet Color (4-4242CUW only)

Lock (4-4822LPRW and 4-4822RPRW only)


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP

NOTE: When HPL top is specified, the chassis

will be matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet


LJ Black

LK Satin Nickel








NOTE: When HPL top is specified, the chassis

will be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-4242CUW

Finish Edge

Pull (4-4822LPRW and 4-4822RPRW only) Pull Finish

Grommet (4-4822LPRW and 4-4822RPRW only)

Grommet Color (4-4242CUW only)

Lock (4-4822LPRW and 4-4822RPRW only)

CO2 EW BWT LJ


Pulse Casegoods

CONFIGURATIONS - BOW SHAPED DESK COCKPIT RIGHT U WITH HIGHBACK ORGANIZER

w d h list


See Next Page for Options

CONSISTS OF:


4-7248LPDCB LEFT 72 48 29.94 310 66 $ 2,580

• Recessed Modesty, 3" at Ends, 9" at Bow

• Two Box Drawers



• 42"W Right End Panel



4-4852RCU RIGHT 48 52 29.94 183 45 $ 1,906






4-4222FRPRC RIGHT 42 22 29.94 150 19 $ 1,172

• Long Grain Direction






4-9043HD6-2 90 15 42.5 260 43 $ 2,337

• User Over 48"W Cockpit Corner Unit and 42"W Return


• Wire Management





4-4822FRPRC RIGHT 48 22 29.94 161 21 $ 1,228






• NOTE: Use 4-9643HD6-2 Highback Organizer

DESK

CORNER UNIT

RETURN

HIGHBACK ORGANIZER

ALSO AVAILABLE: LARGE RETURN

Pulse Casegoods


See Previous Page for Model Numbers

OPTIONS

Finish

Edge (not available on 4-9043HD6-2)

Door (4-9043HD6-2 only)

Pull (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only) Pull Finish

Grommet (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only)


Lock (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2

HPL Woodgrain Laminate

(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP

HPL Solid Color Laminate

(10% upcharge)

FWP

NOTE: HPL finishes not

available on Highback

Organizer

NOTE: When HPL top is

specified, the chassis will

be matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -

StandardJC Matte Silver-

Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDCB


4-4222FRPRC and

4-4822FRPRC

G1 No Grommet


LJ Black

LK Satin Nickel




Core

4-7248LPDCB 4-4222FRPRC 4-4822FRPRC





Cores

4-9043HD6-2 $225




BL2 GR2 RW2 SG2Textured Laminate (10% upcharge)NG2 NH2


(10% upcharge)

BLP GRP RWP SGPTextured Laminate (10% upcharge)NGP NHP



Organizer



be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge (if applicable) | door (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable). See page 436 for

a complete offering of finishes.

MODEL NUMBER

4-7248LPDCB

Finish



Pull (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only) Pull FInish

Grommet (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only)


Lock (4-7248LPDCB, 4-4222FRPRC and 4-4822FRPRC only)

CO2 EW JB Grip BWT G1 LJ LCK1


Pulse Casegoods

CONFIGURATIONS - BOW SHAPED DESK COCKPIT LEFT U WITH HIGHBACK ORGANIZER

w d h list



CONSISTS OF:


4-7248RPDCB RIGHT 72 48 29.94 310 66 $ 2,580

• Recessed Modesty, 3" at Ends, 9" at Bow

• Two Box Drawers



• 42"W Left End Panel



4-4852LCU LEFT 48 52 29.94 183 45 $ 1,906






4-4222FLPRC LEFT 42 22 29.94 150 19 $ 1,172





• Use with 4-4852LCU Corner Unit Only


4-9043HD6-2 90 15 42.5 260 43 $ 2,337



• Wire Management





4-4822FLPRC LEFT 48 22 29.94 161 21 $ 1,228







DESK

CORNER UNIT

RETURN

HIGHBACK ORGANIZER



Pulse Casegoods


OPTIONS

Finish



Pull (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only) Pull Finish

Grommet (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only)

Grommet Color (4-4852LCU only)

Lock (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP



Organizer


specified, the chassis will be

matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248RPDCB


4-4222FLPRC and

4-4822FLPRC

G1 No Grommet


LJ Black

LK Satin Nickel




Core

4-7248RPDCB 4-4222FLPRC 4-4822FLPRC





Cores

4-9043HD6-2 $225






(10% upcharge)




Organizer



matching TFL

EY Square



MODEL NUMBER

4-7248RPDCB

Finish



Pull (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only) Pull Finish

Grommet (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only)


Lock (4-7248RPDCB, 4-4222FLPRC and 4-4822FLPRC only)



Pulse Casegoods

CONFIGURATIONS - COCKPIT RIGHT U WITH HIGHBACK ORGANIZER

w d h list



CONSISTS OF:


4-7248LPDC LEFT 72 48 29.94 310 66 $ 2,458


• Two Box Drawers





4-4852RCU RIGHT 48 52 29.94 183 45 $ 1,906






4-4222FRPRC RIGHT 42 22 29.94 150 19 $ 1,172







4-9043HD6-2 90 15 42.5 260 43 $ 2,337



• Wire Management





4-4822FRPRC RIGHT 48 22 29.94 161 21 $ 1,228







DESK

CORNER UNIT

RETURN

HIGHBACK ORGANIZER



Pulse Casegoods


OPTIONS

Finish



Pull (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only) Pull Finish

Grommet (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only)


Lock (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP



Organizer



matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDC


4-4222FRPRC and

4-4822FRPRC

G1 No Grommet


LJ Black

LK Satin Nickel




Core

4-7248LPDC 4-4222FRPRC 4-4822FRPRC





Cores

4-9043HD6-2 $225






(10% upcharge)




Organizer



matching TFL

EY Square



MODEL NUMBER

4-7248LPDC

Finish



Pull (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only) Pull Finish

Grommet (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only)


Lock (4-7248LPDC, 4-4222FRPRC and 4-4822FRPRC only)



Pulse Casegoods

CONFIGURATIONS - COCKPIT LEFT U WITH HIGHBACK ORGANIZER

w d h list



CONSISTS OF:


4-7248RPDC RIGHT 72 48 29.94 310 66 $ 2,458


• Two Box Drawers





4-4852LCU LEFT 48 52 29.94 183 45 $ 1,906






4-4222FLPRC LEFT 42 22 29.94 150 19 $ 1,172







4-9043HD6-2 90 15 42.5 260 43 $ 2,337



• Wire Management





4-4822FLPRC LEFT 48 22 29.94 161 21 $ 1,228







DESK

CORNER UNIT

RETURN

HIGHBACK ORGANIZER



Pulse Casegoods


OPTIONS

Finish



Pull (4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only) Pull Finish

Grommet 4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only)


Lock (4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP



Organizer



matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248RPDC


4-4222FLPRC and

4-4822FLPRC

G1 No Grommet


LJ Black

LK Satin Nickel




Core

4-7248RPDC 4-4222FLPRC 4-4822FLPRC





Cores

4-9043HD6-2 $225






(10% upcharge)




Organizer



matching TFL

EY Square



MODEL NUMBER

4-7248RPDC

Finish



Pull (4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only) Pull Finish

Grommet 4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only)


Lock (4-7248RPDC, 4-4222FLPRC and 4-4822FLPRC only)



Pulse Casegoods

DESK SHELL STANDARD FEATURES

• Shell Only


• Optional Pedestals (see page 501)



4-7230SHEL 72 30 29.94 195 45 $ 1,132


4-7236SHEL 72 36 29.94 216 49 $ 1,207


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


matching TFL

EW Bead

EX Flair

EY Square


G1 No Grommet

LJ Black

LK Satin Nickel






matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge | grommet | grommet color. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7230SHEL


CO2 EW G1 G1


Pulse Casegoods

MODULAR PEDESTAL STANDARD FEATURES

• Use with Desk Shell 4-7236SHEL




BOX/BOX/FILE


4-1626MBFC 15.63 26 28.81 105 11 $ 883

• Two Box Drawers


FILE/FILE


4-1626MFFC 15.63 26 28.81 105 11 $ 883


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





MODEL NUMBER

4-1626MBFC


CO2 Grip BWT LCK1


Pulse Casegoods

MODULAR DESK WORKSURFACE STANDARD FEATURES

• Use as Desk Worksurface with Full Modular Cabinet Back (see page 511) or with Recessed Desk Modesty Panel (see page 503) and Pedestal Backs (see page 511) or Wing Ends (see page 504)

• Profiled Approach and User Sides

• Grain Runs Lengthwise


4-6630MCT 66 30 1.13 91 5 $ 510

4-7230MCT 72 30 1.13 101 6 $ 525

4-7830MCT 78 30 1.13 114 6 $ 562

4-8430MCT 84 30 1.13 121 7 $ 618


4-6636MCT 66 36 1.13 98 6 $ 549

4-7236MCT 72 36 1.13 106 6 $ 564

4-7836MCT 78 36 1.13 116 7 $ 604

4-8436MCT 84 36 1.13 124 8 $ 664

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square


G1 No Grommet

LJ Black

LK Satin Nickel






be matching TFL

EY Square


MODEL NUMBER

4-6630MCT


CO2 EW G1 G1


Pulse Casegoods

PANEL STANDARD FEATURES

DESK MODESTY


4-2935MCB 34.75 .75 28.81 25 2 $ 267

• Use with 66"W Worksurface

4-2941MCB 40.75 .75 28.81 25 2 $ 303


4-2947MCB 46.75 .75 28.81 25 2 $ 349


4-2953MCB 52.75 .75 28.81 25 2 $ 384


END


4-2930MEP 29 1 28.81 22 2 $ 292

• Use with 30"D Worksurfaces

4-2936MEP 35 1 28.81 26 2 $ 336


• Finished Front and Back, Edges are Unfinished

• Use Between Two 15.625"W Pedestals to Create a Breakfront Modesty

• Cannot be Used Alone as a Full Modesty

• Must be Used with Back Panel or 4-2812SP Support Panel


OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-2935MCB

Finish

CO2


Pulse Casegoods

LEFT AND RIGHT WING END ASSEMBLY STANDARD FEATURES

• Finished Back • Left Wing End Assembly Attaches to Left Side of Worksurface

• Right Wing End Assembly Attaches to Right Side of Worksurface


4-1626LWA LEFT 15.63 26 28.81 21 11 $ 466

• Use with 30"D Worksurfaces with 4" Overhang

4-1630LWA LEFT 15.63 30 28.81 22 12 $ 479


4-1636LWA LEFT 15.63 36 28.81 26 14 $ 498


4-1626RWA RIGHT 15.63 26 28.81 21 11 $ 466

• Use with 30"D Worksurfaces with 4" Overhang

4-1630RWA RIGHT 15.63 30 28.81 22 12 $ 479


4-1636RWA RIGHT 15.63 36 28.81 26 14 $ 498


OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-1626LWA

Finish

CO2


Pulse Casegoods


• Use with Modular Cabinet Back (see page 511)




BOX/BOX/FILE


4-1625MBFC 15.63 24.69 28.81 103 11 $ 908

4-1629MBFC 15.63 28.69 28.81 110 12 $ 921

4-1635MBFC 15.63 34.69 28.81 118 14 $ 946

• Two Box Drawers


FILE/FILE


4-1625MFFC 15.63 24.69 28.81 103 11 $ 908

4-1629MFFC 15.63 28.69 28.81 110 12 $ 921

4-1635MFFC 15.63 34.69 28.81 118 14 $ 946


OPTIONS

Finish Pull Pull FInish Lock


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





MODEL NUMBER

4-1625MBFC


CO2 Grip BWT LCK1


Pulse Casegoods

CREDENZA SHELL STANDARD FEATURES

• Shell Only • Adjustable Levelers • Optional Pedestals (see pages 513-515)


4-7222SHEL 72 22 29.94 199 45 $ 1,331

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square

G1 No Grommet - StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left $146G6 Right and Center $146G7 Left and Center $146G8 Right, Left and Center $219

G1 No Grommet

LJ Black

LK Satin Nickel






be matching TFL

EY Square


MODEL NUMBER

4-7222SHEL


CO2 EW G1 G1


Pulse Casegoods

STANDARD FEATURES

WORKSURFACE STRAIGHTENER


SPTR48 47.5 1.69 0.75 6 0.04 $ 45

• Use Where Unsupported Worksurface is 48"-54"W

SPTR54 54 1.69 0.75 6 0.05 $ 50


SPTR60 60 1.69 0.75 7 0.05 $ 60


SPTR66 66 1.69 0.75 8 0.06 $ 63


MOUNTING BLOCK


4-TFBLK 3 0.75 0.75 2 0.01 $ 86

• Mounting Block for use under Worksurface with Worksurface Straightener when Pencil Drawer (PD-1) is Selected

• Four per Package

• Black Metal Finish

• Used when Span of Unsupported Worksurface is Greater than 48"W

• One per 22"D Worksurface

• Two per 30" or 36"D Worksurface

HOW TO ORDER

MODEL NUMBER

SPTR48


Pulse Casegoods

MODULAR CABINET WORKSURFACE STANDARD FEATURES

• Maximum Unsupported Worksurface Span: 48"W • Profiled User Side

LONG GRAIN DIRECTION


4-3022MCT 30 22 1.13 30 2 $ 275

4-3622MCT 36 22 1.13 36 2 $ 284

4-4222MCT 42 22 1.13 40 2 $ 321

4-4822MCT 48 22 1.13 46 3 $ 369

4-5422MCT 54 22 1.13 50 3 $ 416

4-6022MCT 60 22 1.13 54 4 $ 452

4-6622MCT 66 22 1.13 62 4 $ 475

4-7222MCT 72 22 1.13 72 4 $ 480

4-7822MCT 78 22 1.13 78 4 $ 495

4-8422MCT 84 22 1.13 82 4 $ 509

4-9022MCT 90 22 1.13 90 5 $ 552

4-9622MCT 96 22 1.13 93 5 $ 567

• Use as Cabinet or Credenza Worksurface

• Maximum Unsupported Worksurface Span when using with Back Panel: 72"W

SHORT GRAIN DIRECTION


4-2230MCT 30 22 1.13 30 2 $ 275

4-2236MCT 36 22 1.13 36 2 $ 284

4-2242MCT 42 22 1.13 40 2 $ 321

4-2248MCT 48 22 1.13 46 3 $ 369

4-2254MCT 54 22 1.13 50 3 $ 416

4-2260MCT 60 22 1.13 54 4 $ 452

• Use as Bridge or Return Worksurface

• Available on 60" Length or Less

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


be matching TFL

EW Bead

EX Flair

EY Square


G1 No Grommet

LJ Black

LK Satin Nickel

NOTE: Modular cabinet tops can be modified to

a shorter length. See easy modification list on

page O for upcharge.






be matching TFL

EY Square


MODEL NUMBER

4-3022MCT


CO2 EW G1 G1


Pulse Casegoods

STANDARD FEATURES


END PANEL


4-2922MEP 21 1 28.81 17 2 $ 291

• For 22"D Worksurfaces

• Must be Used with Back Panel or 4-2812SP Support Panel

SUPPORT


4-1212SB 12 12 28.81 12 4 $ 303

• To Support 48"W or Longer Worksurfaces

SUPPORT PANEL


4-2812SP 1 12 28.81 8 1 $ 200

• To Support 22"D Worksurfaces 78"W or Longer

• Also Use at Worksurface Junctions when Using Full Back Panels

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-2922MEP

Finish

CO2


Pulse Casegoods

LEG SUPPORT STANDARD FEATURES

• Use with Modular Cabinet Worksurfaces

• Maximum Worksurface 48"W without Additional Support

• Set of Two Legs Tapering from 2.5" at Worksurface to 1" at Bottom (5"W x 5"D Connector Plate)


• Arm Clearance 28.75"W

model h wt cu ft list

MLX-2 Black 28.75 22 1 $ 364

MLC-2 Satin Nickel 28.75 22 1 $ 364

HOW TO ORDER

MODEL NUMBER

MLX-2


Pulse Casegoods

MODULAR CABINET BACK STANDARD FEATURES

• Adjustable Levelers • Not Available in Backs Less than 30"W

HORIZONTAL GRAIN


4-3029MCB 30 1 28.81 20 3 $ 244

4-3629MCB 36 1 28.81 24 3 $ 275

4-4229MCB 42 1 28.81 28 3 $ 306

4-4829MCB 48 1 28.81 32 3 $ 346

4-5429MCB 54 1 28.81 35 4 $ 378

4-6029MCB 60 1 28.81 38 4 $ 396

4-6629MCB 66 1 28.81 42 5 $ 415

4-7229MCB 72 1 28.81 46 5 $ 448

4-7829MCB 78 1 28.81 52 5 $ 471

4-8429MCB 84 1 28.81 56 5 $ 492

4-9029MCB 90 1 28.81 59 6 $ 537

4-9629MCB 96 1 28.81 62 6 $ 537

VERTICAL GRAIN


4-2916MCB 15.63 1 28.81 10 2 $ 243

4-2930MCB 30 1 28.81 20 3 $ 244

4-2936MCB 36 1 28.81 24 3 $ 275

4-2942MCB 42 1 28.81 28 3 $ 306

4-2948MCB 48 1 28.81 32 3 $ 346

4-2954MCB 54 1 28.81 35 4 $ 378

4-2960MCB 60 1 28.81 38 4 $ 396

• Available on 60"W Length or Less

OPTIONS

Finish Wire Access Slot


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

V7 No Access Slot

V8 Wire Access Slot

1.25" H Opening

Inset 6" from Either End

4-3029MCB $1074-3629MCB $1264-4229MCB $1484-4829MCB $1704-5429MCB $1904-6029MCB $2114-6629MCB $2334-7229MCB $2554-7829MCB $2754-8429MCB $2964-9029MCB $3184-9629MCB $3384-2930MCB $1074-2936MCB $1264-2942MCB $1484-2948MCB $1704-2954MCB $1904-2960MCB $211

NOTE: Not available on backs less than 30" wide

HOW TO ORDER SPECIFY: Finish | wire access slot. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3029MCB

Finish Wire Access Slot

CO2 V7


Pulse Casegoods

MODULAR FILLER PANEL STANDARD FEATURES

• Fills Overhang Gap Between Pedestals


4-2904BFP 1 4 28.81 4 1 $ 182

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-2904BFP

Finish

CO2


Pulse Casegoods


• Locking Pedestal • Adjustable Levelers • Cannot be Used as a Freestanding Unit

BOX/BOX/FILE


4-1621MBFC 15.63 20.75 28.81 95 9 $ 872

• Two Box Drawers


FILE/FILE


4-1621MFFC 15.63 20.75 28.81 95 9 $ 872


OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





MODEL NUMBER

4-1621MBFC


CO2 Grip BWT LCK1


Pulse Casegoods


OPEN


4-3021MOC 30 20 28.81 118 15 $ 792

4-3621MOC 36 20 28.81 121 18 $ 925

• Use with Modular Cabinet Worksurfaces




CPU


4-3021MCPU 30 20 28.81 145 15 $ 804


LEFT SIDE:

• CPU Storage

RIGHT SIDE:


• Partial Back

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-3021MOC

Finish

CO2


Pulse Casegoods

MODULAR STANDARD FEATURES

• Adjustable Levelers • Cannot be Used as a Freestanding Unit

LATERAL FILE PEDESTAL


4-3021MFC 30 20.75 28.81 139 15 $ 1,055

4-3621MFC 36 20.75 28.81 145 18 $ 1,130

• Two Lateral Fie Drawers (Letter or Legal)

• Locking with Anti-Tilt Mechanism

DOOR CABINET


4-3021MDC 30 20.75 28.81 126 15 $ 875

4-3621MDC 36 20.75 28.81 129 18 $ 1,071



• Locking Doors

MULTI FILE PEDESTAL


4-3021MMFL LEFT 30 20.75 28.81 81 15 $ 1,249

• File Drawer on the Left, Box/Box Drawers on the Right

4-3021MMFR RIGHT 30 20.75 28.81 81 15 $ 1,249

• File Drawer on the Right, Box/Box Drawers on the Left

PEDESTAL


4-1613MBOC 15.63 13 28.81 41 5 $ 620

• One Box Drawer



• Two Box Drawers


• One Lateral File Drawer (Letter or Legal)

• Locking File and Lateral File Drawers

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey





MODEL NUMBER

4-3021MFC


CO2 Grip BWT LCK1


Pulse Casegoods

MODULAR CABINET WORKSURFACE STANDARD FEATURES

• Profiled User Side • Grain Runs Lengthwise


4-1613MCT 15.63 13.25 1.13 9 1 $ 160

4-2213MCT 22 13.25 1.13 13 1 $ 207

4-3013MCT 30 13.25 1.13 17 1 $ 226

4-3613MCT 36 13.25 1.13 21 2 $ 245

OPTIONS

Finish Edge


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square






EY Square


MODEL NUMBER

4-1613MCT

Finish Edge

CO2 EW


Pulse Casegoods

STANDARD FEATURES

MODULAR OPEN PEDESTAL


4-1613MOC 15.63 12.25 28.81 33 5 $ 483

4-2213MOC 22 12.25 28.81 44 6 $ 568

4-3013MOC 30 12.25 28.81 59 8 $ 658

4-3613MOC 36 12.25 28.81 66 10 $ 776




CENTER DRAWER


4-OCD1 23 13 3.25 11 2 $ 409

• Use with 66"W x 30"D Bullet Tables

4-OCD 23 16.63 3.25 13 2 $ 409

• Use with Double and Single Pedestal Desks

• Use with 84" and 72"W Bullet and P-Tables

• Center Drawer with Pencil Tray

• 25.25"W with Mounting Brackets

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-1613MOC

Finish

CO2


Pulse Casegoods

OPTIONAL BENCH HEIGHT CABINETS

Convenient bench storage in 3 widths and 3 cabinet styles can be used alone or nested underneath an extended bridge with end panel in a U configuration. Optional cushions provide bench height seating for a quick consult.

Cabinet Options

Z1 - Open Z2 - 4 Tray Drawers Z3 - Tray/File Drawers

Cabinet Combinations

Single Z1 Z2 Z3

Double Z1-Z1 Z1-Z2 Z2-Z1 Z2-Z2

Z1-Z3 Z3-Z1 Z2-Z3 Z3-Z2 Z3-Z3

Triple Z1-Z1-Z1 Z1-Z1-Z2 Z1-Z2-Z1 Z2-Z1-Z1 Z1-Z1-Z3 Z1-Z3-Z1 Z3-Z1-Z1

Z2-Z2-Z2 Z2-Z2-Z1 Z2-Z1-Z2 Z1-Z2-Z2 Z2-Z2-Z3 Z2-Z3-Z2 Z3-Z2-Z2

Z3-Z3-Z3 Z3-Z3-Z1 Z3-Z1-Z3 Z1-Z3-Z3 Z3-Z3-Z2 Z3-Z2-Z3 Z2-Z3-Z3

Z1-Z2-Z3 Z1-Z3-Z2 Z2-Z1-Z3 Z2-Z3-Z1 Z3-Z1-Z2 Z3-Z2-Z1


Pulse Casegoods

SINGLE BENCH HEIGHT CABINET STANDARD FEATURES

• Optional Cushion Sold on page 522


4-3022SHC 30 22 19 93 9 $ 750

OPTIONS

Finish Cabinet Pull Pull FInish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Z1 Open - Standard

Z2 4 Tray Drawers $600

Z3 Tray/File Drawers $428

For Z1AS No Pull

For Z2 and Z3Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

HOW TO ORDER SPECIFY: Finish | cabinet | pull | pull finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3022SHC

Finish Cabinet Pull Pull Finish

CO2 Z1 Grip BWT


Pulse Casegoods

DOUBLE BENCH HEIGHT CABINET STANDARD FEATURES



4-6022SHC 60 22 19 186 18 $ 1,285

OPTIONS

Finish Left Cabinet Right Cabinet Pull Pull FInish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Z1 Open - Standard



Z1 Open - Standard



For Z1AS No Pull

For Z2 and Z3Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

HOW TO ORDER SPECIFY: Finish | left cabinet | right cabinet | pull | pull finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3022SHC

Finish Left Cabinet Right Cabinet Pull Pull FInish

CO2 Z1 Z1 Grip BWT


Pulse Casegoods

TRIPLE BENCH HEIGHT CABINET STANDARD FEATURES



4-9022SHC 90 22 19 277 27 $ 1,777

OPTIONS

Finish Left Cabinet Center Cabinet Right Cabinet Pull Pull Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2

Z1 Open - Standard



Z1 Open - Standard



Z1 Open - Standard



For Z1AS No Pull

For Z2 and Z3Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

HOW TO ORDER SPECIFY: Finish | left cabinet | center cabinet | right cabinet | pull | pull finish. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-3022SHC

Finish Left Cabinet Center Cabinet Right Cabinet Pull Pull Finish

CO2 Z1 Z1 Z1 Grip BWT


Pulse Casegoods

CUSHIONS FOR BENCH HEIGHT CABINETS STANDARD FEATURES

SINGLEmodel w d h wt cu ft

4-3022SC 29.88 22 1.5 14 1


1.25 25 405 426 449 478 520 578 637 696 755 814 872 931 990 1,049 1,107 677 736 794

DOUBLEmodel w d h wt cu ft

4-6022DC 59.88 22 1.5 28 2


2 40 788 821 859 906 971 1,065 1,159 1,254 1,348 1,442 1,536 1,630 1,724 1,818 1,912 1,206 1,301 1,394

TRIPLEmodel w d h wt cu ft

4-9022TC 89.88 22 1.5 42 3


2.75 55 1,155 1,200 1,252 1,317 1,407 1,536 1,666 1,795 1,924 2,054 2,183 2,312 2,442 2,571 2,700 1,719 1,850 1,978

OPTIONS

Fabric/Grade


NOTE: A sample of all COM fabrics must be

submitted to OFS for preliminary approval

prior to shipment of fabric. See ofs.com for

COM Ordering Instructions.


MODEL NUMBER

4-3022SC

Fabric/Grade



Pulse Casegoods

CONFIGURATIONS - MODULAR RIGHT U

model w d h list

M4-1 Total Unit Dimensions 72 106 72.44 Unit Total $ 7,419


CONSISTS OF:


4-7236SHEL 72 36 29.94 216 49 $ 1,207






4-1626MBFC 15.63 26 28.81 105 11 $ 883

• Two Box Drawers






4-2248BR 22 48 29.94 100 7 $ 546




4-7222SHEL 72 22 29.94 199 45 $ 1,331


• Optional Pedestals (see pages 513-515)


4-1621MFFC 15.63 20.75 28.81 95 9 $ 872






4-10643HD6-2 106 15 42.5 285 46 $ 2,580


• Finished Back

• Wire Management




DESK SHELL

BOX/BOX/FILE PEDESTAL

BRIDGE

CREDENZA SHELL (SHELL ONLY)

FILE/FILE PEDESTAL

HIGHBACK ORGANIZER


Pulse Casegoods


OPTIONS

Finish

Edge (4-7236SHEL, 4-2248BR and 4-7222SHEL only)


Pull (4-1626MBFC and 4-1621MFFC only) Pull Finish

Grommet (4-7236SHEL, 4-2248BR and 4-7222SHEL only)

Grommet Color (4-7236SHEL, 4-2248BR and 4-7222SHEL only)

Lock (4-1626MBFC, 4-1621MFFC, and 4-10643HD6-2 only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP


available on Pedestals or

Highback Organizer



matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7236SHEL


4-2248BR

G1 No Grommet

G2 Right $73G3 Center - StandardG4 Left $73G5 Right and Left $146G6 Right and Center $73G7 Left and Center $73G8 Right, Left and Center

$146

4-7222SHEL

G1 No Grommet - StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left $146G6 Right and Center $146G7 Left and Center $146G8 Right, Left and Center

$219

G1 No Grommet

LJ Black

LK Satin Nickel




Core

4-1626MBFC 4-1621MFFC





Cores

4-10643HD6-2 $225






(10% upcharge)




Highback Organizer



matching TFL

EY Square



MODEL NUMBER

4-7236SHEL

Finish



Pull (4-1626MBFC and 4-1621MFFC only) Pull Finish




CO2 EW G1 G1


Pulse Casegoods

CONFIGURATIONS - MODULAR LEFT U

model w d h list



CONSISTS OF:


4-7236SHEL 72 36 29.94 216 49 $ 1,207






4-1626MBFC 15.63 26 28.81 105 11 $ 883

• Two Box Drawers






4-2248BR 22 48 29.94 100 7 $ 546




4-7222SHEL 72 22 29.94 199 45 $ 1,331


• Optional Pedestals (see pages 513-515)


4-1621MFFC 15.63 20.75 28.81 95 9 $ 872






4-10643HD6-2 106 15 42.5 285 46 $ 2,580


• Finished Back

• Wire Management




DESK SHELL


BRIDGE

CREDENZA SHELL (SHELL ONLY)

FILE/FILE PEDESTAL

HIGHBACK ORGANIZER


Pulse Casegoods


OPTIONS

Finish



Pull (4-1626MBFC and 4-1621MFFC only) Pull FInish





QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP



Highback Organizer



be matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $333

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7236SHEL


4-2248BR

G1 No Grommet

G2 Right $73G3 Center - StandardG4 Left $73G5 Right and Left $146G6 Right and Center $73G7 Left and Center $73G8 Right, Left and Center

$146

4-7222SHEL

G1 No Grommet - StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left $146G6 Right and Center $146G7 Left and Center $146G8 Right, Left and Center

$219

G1 No Grommet

LJ Black

LK Satin Nickel




Core

4-1626MBFC 4-1621MFFC





Cores

4-10643HD6-2 $225






(10% upcharge)




Highback Organizer



be matching TFL

EY Square



MODEL NUMBER

4-7236SHEL

Finish



Pull (4-1626MBFC and 4-1621MFFC only) Pull FInish




CO2 EW G1 G1


Pulse Casegoods

CONFIGURATIONS - BOW SHAPED COCKPIT RIGHT U WITH MODULAR CREDENZA

model w d h list



CONSISTS OF:


4-7248LPDCB LEFT 72 48 29.94 310 66 $ 2,580


• Two Box Drawers






4-4852RCU RIGHT 48 52 29.94 183 45 $ 1,906





4-7222MCT 72 22 1.13 72 4 $ 480

• Profiled on User Side


4-7229MCB 72 1 28.81 46 5 $ 448

• Grain Runs Horizontally



4-3021MFC 30 20.75 28.81 139 15 $ 1,055






4-1621MFFC 15.63 20.75 28.81 95 9 $ 872





DESK

CORNER UNIT

MODULAR CABINET WORKSURFACE

MODULAR CABINET BACK

TWO DRAWER LATERAL FILE PEDESTAL

FILE/FILE PEDESTAL


Pulse Casegoods


OPTIONS

Finish

Edge (4-7248LPDCB, 4-4852RCU and 4-7222MCT only)

Pull (4-7248LPDCB, 4-3021MFC and 4-1621MFFC only) Pull FInish

Grommet (4-7248LPDCB and 4-7222MCT only)

Grommet Color (4-4852RCU and 4-7222MCT only)

Lock (4-7248LPDCB, 4-3021MFC and 4-1621MFFC only)

Wire Access Slot (4-7229MCB only)


QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP



Modular Cabinet Back



matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDCB


4-7222MCT


G1 No Grommet -

StandardLJ Black

LK Satin Nickel



LCK1 Requires 1 Lock CoreV7 No Access

Slot

V8 Wire Access

Slot $2551.25" H Opening

Inset 6" from

Either End




(10% upcharge)







matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable) | wire access slot (if applicable). See

page 436 for a complete offering of finishes.

MODEL NUMBER

4-7248LPDCB

Finish


Pull (4-7248LPDCB, 4-3021MFC and 4-1621MFFC only) Pull FInish







Pulse Casegoods

CONFIGURATIONS - BOW SHAPED COCKPIT LEFT U WITH MODULAR CREDENZA

model w d h list



CONSISTS OF:


4-7248RPDCB RIGHT 72 48 29.94 310 66 $ 2,580


• Two Box Drawers






4-4852LCU LEFT 48 52 29.94 183 45 $ 1,906





4-7222MCT 72 22 1.13 72 4 $ 480



4-7229MCB 72 1 28.81 46 5 $ 448




4-3021MFC 30 20.75 28.81 139 15 $ 1,055






4-1621MFFC 15.63 20.75 28.81 95 9 $ 872





DESK

CORNER UNIT



TWO DRAWER LATERAL FILE PEDESTAL

FILE/FILE PEDESTAL


Pulse Casegoods


OPTIONS

Finish


Pull (4-7248RPDCB, 4-3021MFC and 4-1621MFFC only) Pull Finish


Grommet Color (4-4852RCU AND 4-7222MCT only)




QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP






matching TFL

EW Bead

EX Flair

EY Square

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDCB


4-7222MCT


G1 No Grommet -

StandardLJ Black

LK Satin Nickel



LCK1 Requires 1 Lock CoreV7 No Access

Slot

V8 Wire Access


Inset 6" from

Either End




(10% upcharge)







matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable) | wire access slot (if applicable). See

page 436 for a complete offering of finishes.

MODEL NUMBER

4-7248RPDCB

Finish


Pull (4-7248RPDCB, 4-3021MFC and 4-1621MFFC only) Pull FInish


Grommet Color (4-4852RCU AND 4-7222MCT only)





Pulse Casegoods

CONFIGURATIONS - BULLET RIGHT L WITH WALL UNIT

model w d h list



CONSISTS OF:


4-7230SW 30 24 72.5 205 40 $ 2,144

• Finished Back


LEFT SIDE:



RIGHT SIDE:




4-8436BT 84 36 1.13 125 7 $ 1,453

• Bullet Shaped Worksurface Profiled on Rim




• Requires a Modesty Panel or Additional Support


4-CB4 4 4 28.81 33 1 $ 320

• 4" Metal Cylinder Base



4-2936TEP 36 1 28.81 26 3 $ 297



4-1266TMP 63 1 12 18 3 $ 321


4-7222MCT 72 22 1.13 72 4 $ 480



4-7229MCB 72 1 28.81 46 5 $ 448




4-3021MCPU 30 20 28.81 145 15 $ 804


LEFT SIDE:

• CPU Storage

RIGHT SIDE:


• Partial Back


4-3022LF2 30 22 29.94 176 15 $ 1,154

• Drawer Front Mounted Gang Lock with Anti-Tilt


• Two Drawers (Letter or Legal)


4-1621MP 15.63 20.75 25.31 95 9 $ 992



• One Box Drawer


• Casters

STORAGE WARDROBE

BULLET WORKSURFACE

BASE

END PANEL

MODESTY PANEL



CPU PEDESTAL

LATERAL FILE

MOBILE PEDESTAL


Pulse Casegoods

CONFIGURATIONS - BULLET RIGHT L WITH WALL UNIT - CONTINUED


4-3621HDW2 36 15 18.63 130 11 $ 740


• Organizer has Square Edge Only




4-7221HDW4 72 15 18.63 185 16 $ 1,384






4-3021HDW2 30 15 18.63 120 10 $ 643





See Previous Page for More Model Numbers

36" WALLMOUNT ORGANIZER



OPTIONS

Finish

Edge (4-8436BT, 4-7222MCT and 4-3022LF2 only)

Door (4-3621HDW2, 4-7221HDW4 and 4-3021HDW2 only)

Pull (4-7230SW, 4-3022LF2 and 4-1621MP only) Pull FInish

Grommet (4-7222MCT only)

Grommet Color (4-7222MCT only)

Lock (4-1621MP, 4-3621HDW2, 4-3021HDW2, 4-7230SW, 4-7221HDW4 only)



QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP

NOTE: HPL finishes

only available on Bullet

Worksurface, Modular

Cabinet Worksurface and

Lateral File



be matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel

- Standard

JC Matte Silver-

Framed Frosted

Insert

4-3621HDW2 and

4-3021HDW2 $1604-7221HDW4 $257

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

G1 No Grommet -

StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left $146G6 Right and Center $146G7 Left and Center $146G8 Right, Left and Center

$219

G1 No Grommet -

StandardLJ Black

LK Satin Nickel




Core

4-1621MP





Core

4-3621HDW2 $75 4-3021HDW2 $75 LCK2 Requires 2 Lock

Cores

4-7230SW $150 4-7221HDW4 $150

NOTE: NL - no lock

must be chosen when


on 4-3621HDW2

4-3021HDW2,

4-7221HDW4

V7 No Access Slot

V8 Wire Access Slot

$2551.25" H Opening

Inset 6" from Either

End




(10% upcharge)


NOTE: HPL finishes

only available on Bullet

Worksurface, Modular

Cabinet Worksurface and

Lateral File



be matching TFL

EY Square

HOW TO ORDE SPECIFY: Finish | edge (if applicable) | door (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable) | wire access slot

(if applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7230SW

Finish

Edge (4-8436BT, 4-7222MCT and 4-3022LF2 only)

Door (4-3621HDW2, 4-7221HDW4 and 4-3021HDW2 only)

Pull (4-7230SW, 4-3022LF2 and 4-1621MP only) Pull Finish

Grommet (4-7222MCT only)

Grommet Color (4-7222MCT only)

Lock (4-1621MP, 4-3621HDW2, 4-3021HDW2, 4-7230SW, 4-7221HDW4 only)


CO2 Grip BWT NL


Pulse Casegoods

CONFIGURATIONS - BOW SHAPED COCKPIT RIGHT U WITH WARDROBE

model w d h list

M4-6 Total Unit Dimensions 105.63 100 72.5 Unit Total $ 9,664


CONSISTS OF:


4-7248LPDCB LEFT 72 48 29.94 310 66 $ 2,580


• Two Box Drawers






4-4852RCU RIGHT 48 52 29.94 183 45 $ 1,906





4-4222MCT 42 22 1.13 40 2 $ 321



4-2942MCB 42 1 28.81 28 3 $ 306

• Grain Runs Vertically



4-1621MBFC 15.63 20.75 28.81 95 9 $ 872

• Two Box Drawers






4-1621MFFC 15.63 20.75 28.81 95 9 $ 872






4-7216RSW RIGHT 15.63 24 72.5 112 23 $ 1,545



• Finished Back



4-3021HDW2 30 15 18.63 120 10 $ 643





4-3019HSW 30 14 18.63 40 9 $ 619


DESK

CORNER UNIT




FILE/FILE PEDESTAL

STORAGE WARDROBE

TWO WALLMOUNT ORGANIZERS

SHELF ORGANIZER


Pulse Casegoods


OPTIONS

Finish


Door (4-3021HDW2 only)

Pull (4-7248LPDCB, 4-1621MBFC, 4-1621MFFC and 4-7216RSW only) Pull Finish



Lock (4-7248LPDCB, 4-1621MBFC, 4-1621MFFC,4-7216RSW, 4-3021HDW2)



QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP

NOTE: HPL finishes only

available on Desk, Corner

Unit and Modular Cabinet

Worksurface



be matching TFL

EW Bead

EX Flair

EY Square

JB Laminate Panel -


Framed Frosted

Insert $160

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248LPDCB

G1 No Grommet -

StandardKP Grommet $73

4-4222MCT

G1 No Grommet -

StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left

$146G6 Right and

Center $146G7 Left and

Center $146G8 Right, Left and

Center $219

G1 No Grommet -

StandardLJ Black

LK Satin Nickel




Core

4-7248LPDCB 4-1621MBFC 4-1621MFFC





Core

4-7216RSW $75 4-3021HDW2 $75

NOTE: NL - no lock

must be chosen when


on 4-3021HDW2

V7 No Access

Slot

V8 Wire Access

Slot $148 1.25" H Opening

Inset 6" from

Either End




(10% upcharge)





Worksurface



be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge (if applicable) | door (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) |

lock (if applicable) | wire access slot (if applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7248LPDCB

Finish



Pull (4-7248LPDCB, 4-1621MBFC, 4-1621MFFC and 4-7216RSW only) Pull Finish



Lock (4-7248LPDCB, 4-1621MBFC, 4-1621MFFC,4-7216RSW, 4-3021HDW2)




Pulse Casegoods

CONFIGURATIONS - BOW SHAPED COCKPIT LEFT U WITH WARDROBE

model w d h list

M4-7 Total Unit Dimensions 105.63 100 72.5 Unit Total $ 9,664


CONSISTS OF:


4-7248RPDCB RIGHT 72 48 29.94 310 66 $ 2,580


• Two Box Drawers






4-4852LCU LEFT 48 52 29.94 183 45 $ 1,906





4-4222MCT 42 22 1.13 40 2 $ 321



4-2942MCB 42 1 28.81 28 3 $ 306

• Grain Runs Vertically



4-1621MBFC 15.63 20.75 28.81 95 9 $ 872

• Two Box Drawers






4-1621MFFC 15.63 20.75 28.81 95 9 $ 872






4-7216LSW LEFT 15.63 24 72.5 112 23 $ 1,545



• Finished Back



4-3021HDW2 30 15 18.63 120 10 $ 643





4-3019HSW 30 14 18.63 40 9 $ 619


DESK

CORNER UNIT




FILE/FILE PEDESTAL

STORAGE WARDROBE

TWO WALLMOUNT ORGANIZERS

SHELF ORGANIZER


Pulse Casegoods


OPTIONS

Finish

Edge (4-7248RPDCB, 4-4852LCU and 4-4222MCT only)


Pull (4-7248RPDCB, 4-1621MBFC, 4-1621MFFC and 4-7216LSW only) Pull Finish

Grommet (4-7248RPDCB and 4-4222MCT only)

Grommet Color (4-4852LCU and 4222MCT only)

Lock (4-7248RPDCB, 4-1621MBFC, 4-1621MFFC, 4-7216LSW, 4-3021HDW2)



QuarteredQE2DS2KD2

NW2EN2 CO2

PC2QR2ST2

Flat CutVM2MC2

LC2BU2

BE2 MH2

LM2


FW2


(10% upcharge)

QuarteredQEPDSPKDP

NWPMEPCOP

PCPQRPSTP

Flat CutMGPCMP

CHPBUP

BEPHNP

TMP


(10% upcharge)

FWP




Worksurface



be matching TFL

EW Bead

EX Flair

EY Square

JB Laminate

Panel - StandardJC Matte Silver-

Framed Frosted

Insert $160

Axis

Crest

Empire

Era

Forte

Grip

Icon

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SNCK Satin Nickel

SBRZ Soft Bronze

H1F Warm Grey

4-7248RPDCB

G1 No Grommet -

StandardKP Grommet $73

4-4222MCT

G1 No Grommet -

StandardG2 Right $73G3 Center $73G4 Left $73G5 Right and Left

$146G6 Right and

Center $146G7 Left and

Center $146G8 Right, Left and

Center $219

G1 No Grommet -

StandardLJ Black

LK Satin Nickel




Core

4-7248RPDCB 4-1621MBFC 4-1621MFFC





Core

4-7216LSW $75 4-3021HDW2 $75

NOTE: NL - no lock

must be chosen when


on 4-3021HDW2

V7 No Access

Slot

V8 Wire Access


Inset 6" from

Either End




(10% upcharge)





Worksurface



be matching TFL

EY Square

HOW TO ORDER SPECIFY: Finish | edge (if applicable) | door (if applicable) | pull (if applicable) | pull finish (if applicable) | grommet (if applicable) | grommet color (if applicable) | lock (if applicable) | wire access slot (if

applicable). See page 436 for a complete offering of finishes.

MODEL NUMBER

4-7248RPDCB

Finish

Edge (4-7248RPDCB, 4-4852LCU and 4-4222MCT only)


Pull (4-7248RPDCB, 4-1621MBFC, 4-1621MFFC and 4-7216LSW only) Pull FInish

Grommet (4-7248RPDCB and 4-4222MCT only)

Grommet Color (4-4852LCU and 4222MCT only)

Lock (4-7248RPDCB, 4-1621MBFC, 4-1621MFFC, 4-7216LSW, 4-3021HDW2)




Pulse Casegoods

CONFERENCE WORKSURFACE STANDARD FEATURES

ROUND


4-36RT 36 36 1.13 55 4 $ 657

• Seats Three to Four

4-42RT 42 42 1.13 60 5 $ 674

• Seats Four

4-48RT 48 48 1.13 75 7 $ 685

• Seats Four to Five

• 1.125" Thick Round Worksurface

• One Base Required

OPTIONS

Finish Edge Power Cutout


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square

QR No Power Cutout

NOTE: To order power

cutout, select location. See

page 1097.

NOTE: Options are for

cutout opening only.

Grommets and power

supplies must be ordered

separately. See page 1098.






EY Square

HOW TO ORDER SPECIFY: Finish | edge | power cutout. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-36RT


CO2 EW QR


Pulse Casegoods


RECTANGULAR


4-7236RT 72 36 1.13 114 9 $ 720

• One Piece Worksurface

• Two Bases Required

• Seats Six

4-9642RT 96 42 1.13 157 13 $ 1,331



• Seats Eight

4-12048RT 120 48 1.13 234 20 $ 1,849

• Two Piece Worksurface

• Three Bases Required

• Seats Ten

4-14448RT 144 48 1.13 294 24 $ 1,933



• Seats Twelve

• 1.125" Thick Rectangular Worksurface

OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square

QR No Power Cutout



page 1097.



Grommets and power








EY Square


MODEL NUMBER

4-7236RT


CO2 EW QR


Pulse Casegoods


RACETRACK


4-7236AT 72 36 1.13 105 9 $ 965



• Seats Six

4-9642AT 96 42 1.13 152 13 $ 1,529



• Seats Eight

4-12048AT 120 48 1.13 224 20 $ 2,142



• Seats 10

4-14448AT 144 48 1.13 274 24 $ 2,251



• Seats 12

BOAT-SHAPED


4-9642BT 96 42 1.13 154 13 $ 1,571



• Seats Eight

4-12048BT 120 48 1.13 228 20 $ 2,182



• Seats 10

4-14448BT 144 48 1.13 278 24 $ 2,269



• Seats 12



OPTIONS



QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



FW2


QuarteredQEPDSP

KDPNWP

MEPCOP

PCPQRP

STP



FWP


EW Bead

EX Flair

EY Square

QR No Power Cutout



page 1097.



Grommets and power








EY Square


MODEL NUMBER

4-7236AT


CO2 EW QR


Pulse Casegoods

LAMINATE CYLINDER BASE BASE STANDARD FEATURES


• Overall Height with Worksurface 29.875"

• NOTE: All Round Conference Worksurfaces Require Additional Weight in the Base when Using Cylinder Bases to Provent the Table from Tipping Over. OFS Provides Instruction Sheets and Clear 6ML Bags with Base. Customer must Provide Dry Sand for the Additional Weight.


4-20CB 20 20 28.75 40 11 $ 1,130

• 8"W x 8"D Wire Access Door

• Arm Clearance: 1.125" Worksurface - 28.75"H

• Use One Base with 42" and 48" Round Worksurfaces

• Use Three Bases with 12' Worksurfaces


4-18CB 18 18 28.75 88 12 $ 1,094

• Arm Clearance 28.75"H

• Use One Base with 36" Round Worksurface

• NOTE: OFS Provides Additional Weight

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-20CB

Finish

CO2


Pulse Casegoods

BASE STANDARD FEATURES

• Adjustable Levelers • Overall Height with Worksurface 29.875"H • Arm Clearance 1.125" Worksurface - 28.75"H

PANEL


4-21PB 21 2.06 28.75 37 5 $ 308

• Use Two Bases with 6' Worksurfaces

4-24PB 24 2.06 28.75 42 5 $ 308


• Use Three Bases with 10' and 12' Worksurfaces

ELLIPSE


4-24EB 24 6 28.75 50 5 $ 1,130

• Laminate Ellipse Base



OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-21PB

Finish

CO2


Pulse Casegoods

WIRE ACCESS BASE STANDARD FEATURES

• Wire Pass-Thru from Worksurface to Bottom


• Overall Height 29.875"H

• Arm Clearance 28.75"H

CONTEMPORARY PANEL BASE


4-21PBW 21 2.13 28.75 22 4 $ 760


4-24PBW 23.88 2.13 28.75 26 5 $ 760



PANEL BASE WITH ALUMINUM END CAPS


PBT-M24 24 5 28.75 42 5 $ 941

• Removable Access Panel for Wire Access



V-BASE


4-22VB 22.25 10.38 28.75 52 7 $ 1,129

• Curved Base

• Use Two Bases with 42" and 48" Round Worksurfaces

• Use Two Bases with 6' and 8' Worksurfaces

• Use Two Bases and One Compatible Base with 10' and 12' Worksurfaces

OPTIONS

Finish


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2


MODEL NUMBER

4-21PB

Finish

CO2


Pulse Casegoods

METAL BASE STANDARD FEATURES

• Set of Two Metal Square Bases • Use Two Sets with 36", 42" and 48" Round Worksurfaces


4-L2S 2 2 28.25 16 1 $ 187

REESE BASE


4-R7L 7 7 28.75 10 1 $ 244

• Metal Reese Base with Glides (Set of Two)

• For Use on Rectanglular Worksurfaces Only

• Maximum Size Worksurface 72" x 36"

• Adjustable Leverlers

• Includes all Mounting Hardware

OPTIONS

Base Color

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SBRZ Soft Bronze

H1F Warm Grey

HOW TO ORDER SPECIFY: Base color. See page 436 for a complete offering of finishes.

MODEL NUMBER

4-L2S

Base Color

BWT


Pulse Casegoods

SQUARE BASE STANDARD FEATURES

• Stainless Steel

• Matte Finish

• Use One Base with 36" Round Worksurfaces



5520-22-A2K 22 22 28.5 39 5 $ 761

HOW TO ORDER

MODEL NUMBER

5520-22-A2K


Pulse Casegoods

X BASE - STATIC STANDARD FEATURES

X BASE


TSX32 32 32 27.75 17 11 $ 610


TSX38 38 38 27.75 23 15 $ 718


OPTIONS

Finish Glide/Caster

Standard Powder Coats

BWT Bone White

BUFF Buff

CHLK Chalk

SGLD Gold

GRPH Graphite

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

SBRZ Soft Bronze

H1F Warm Grey

Studio Powder Coats (10% upcharge)

CADT Cadet

CLOV Clover

GLDN Goldenrod

HERN Heron

LATT Latte

MOSS Moss

RUSS Russet

SUNS Sunset

A4F Glides - StandardA6C Black Dual Wheel Casters $85

HOW TO ORDER SPECIFY: Finish | glide/caster.

MODEL NUMBER

TSX32

Finish Glide/Caster

BKO A4F


Pulse Casegoods

METAL BASE STANDARD FEATURES

• Adjustable Levelers • Arm Clearance 27.75"H

X BASE


MXB-32 32 32 27.75 32 4 $ 284


T BASE


MTB2 34 2 27.75 26 1 $ 275

• Use Two Bases with 6' and 8' Worksurfaces that are 36"-48"D

• Use Three Bases with 10' and 12' Worksurfaces that 36"-48"D

X4 BASE


MX4-30 30 30 27.75 53 4 $ 829


X4 BASE


MX4-38 38 38 27.75 58 4 $ 1,044


OPTIONS

Finish

RC Black

RD Pewter


MODEL NUMBER

MXB-32

Finish

RC


Pulse Casegoods

METAL CIRCULAR BASE STANDARD FEATURES

• Adjustable Levelers • Arm Clearance 28.25"H • 4" Diameter Post


MCB-23 23 23 28.25 46 2 $ 839


• Use Two Bases with 6' and 8' Worksurfaces

MCB-28 28 28 28.25 88 4 $ 1,022



MCB-23

MCB-28

OPTIONS

Finish

BWT Bone White

MSL Luster Grey

H1P Oiled Bronze

BKO Onyx

POLR Polar

H1F Warm Grey


MODEL NUMBER

MXB-32

Finish

BKO


Pulse Casegoods

VISUAL PRESENTATION BOARD STANDARD FEATURES

• Fabric Tackboard

• Flip Chart

• Display Rail with Adjustable Hooks for Flip Chart

• Non-Glare Marker Board

• Set of Four Dry Markers and Eraser

• Ledge for Eraser and Marker Storage


4-4848VP 48 5.25 48 132 12 $ 1,877


4-4848VP2 48 5 48 118 12 $ 1,191

OPTIONS

Finish Fabric/Grade (4-4848VP only)


QuarteredQE2DS2

KD2NW2

EN2 CO2

PC2QR2

ST2



BL2 FW2 GR2 RW2 SG2




Fabric Tackboard List Pricing/Gradeyds sq ft comcom (54") col 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L1 L2 L3

1.5 n/a 0 25 53 88 138 208 279 349 420 490 561 631 702 772 843 n/a n/a n/a

HOW TO ORDER SPECIFY: Finish | textile pattern and color (if applicable). See page 436 for a full list of finishes and graded-in fabric options.

MODEL NUMBER

4-4848VP

Finish Fabric/Grade (4-4848VP only)

CO2 Grade 3, Momentum, Hue, Smoke


AccessoriesDrawer Assemblies/Bracket

CENTER DRAWER STANDARD FEATURES


OCD 23 16.63 3 13 2 $ 425

• Use with Double and Single Pedestal Desks

• Use with Modular Peninsula Tops if no Modesty Panel is Specified

• Not Compatible with Tables that have Straightener Rails or Troughs

• Pencil Tray

• 25.25"W with Bracket Tabs


OCD1 23 13 3 11 2 $ 425

• Use with Built Up Peninsula Tables with Modesty Panels and with Modular Peninsula Tops if an Optional Modesty Panel is Specified

• Pencil Tray

• 25.25"W with Bracket Tabs


PD-1 12.88 19.25 2.13 4 1 $ 139

• Pencil Drawer

• Black Molded Plastic

• Field Installed

• Flush Mount only


WK/S 21.75 11 3.75 8 1 $ 493

• Wood Keyboard Tray with Extendable Suspension

• Clearance Adjustable from 1.25" to 2.5" in Quarter Inch Increments

• 22.75"W with Slides

• Specify Finish


DA16-1 12.88 5.63 1.13 2 0.2 $ 42

DA19-1 15.88 5.63 1.13 2 0.3 $ 37

• Black Plastic Pencil Tray

• Cannot be used with Multi File Pedestal


WALBKT-1 12.88 2.13 4 3 1 $ 94

• Wallmount Bracket

• Use to Support 22"D Worksurfaces when Full Support Base or Full Support Panel Cannot be used between Pedestals and/or End Panels

OPTIONS

Grain Pattern (OCD, OCD1 and WK/S Only) Finish (OCD, OCD1 and WK/S Only)

B4Z Quartered Veneer

QECDSTMNW

MGWMROOSL

PCOMGO

B5A Flat Cut Veneer

MMCMLCBUW

EBYMVWMBM

MHM

HOW TO ORDER SPECIFY: Grain pattern | finish. See page H for the designator finish name.

MODEL NUMBER

OCD

Grain Pattern (OCD, OCD1 and WK/S Only) Finish (OCD, OCD1 and WK/S Only)

B4Z MGO


AccessoriesKeyboard Assemblies

STANDARD FEATURES


KBA-1 8.3 17 2.7 9 1 $ 209

• Keyboard Arm Assembly

• Lever Free, One Touch Spring Assist Adjustable Mechanism with 17" Track

• Height and Tilt Adjustment with an Integral Visual Gauge

• All Metal Finish Black Powder Coat with Molded Soft Touch Knob

• ANSI/HFES 100 and Bifma G1 Compliant

• Use with Wood Keyboard Platform WKT


WKT 21.75 11 1 5 0.6 $ 290

• Wood Keyboard Platform

• Use with KBA-1

• Specify Finish


KBA-2 9.5 17 7.4 8 1 $ 137


• Built in Clamp for Keyboards from 5.8" to 9" Deep

• Adjustable Mechanism with 17" Track

• Height, Tilt and Swivel Adjustment

• All Metal Finish Black Powder Coat with Molded Soft Touch Adjustment Knob



KBA-3 28.3 19 2.7 15 1 $ 344


• Lever Free, One Touch Spring Assist Adjustable Mechanism with 17" Track

• Height and Tilt Adjustment with an Integral Visual Gauge

• All Metal Finish Black Powder Coat with Molded Soft Touch Knob

• Keyboard Tray with Gel-Free Foam Palm Rest and Swivel Mouse Surface

• Keyboard and Mouse Surface are RecycledHDPE



SSW-1B BLACK 35.4 24 6.2-20 40 5 $ 696

SSW-1W WHITE 35.4 24 6.2-20 40 5 $ 696

• Sit/Stand Workstation

• 13.8" Height Adjustment

• 20 Degree Keyboard Tilt Range

• Space for Two Monitors

• 35 lbs. Total Weight Capacity

• Ships Fully Assembled

OPTIONS

Finish (WKT Only)

VeneerQuarteredQECDSTMNW

MGWMROOSL

PCOMGO

Flat CutMMCMLCBUW

EBYMVWMBM

MHM

HOW TO ORDER SPECIFY: Finish (if applicable). See page H for the designator finish name.

MODEL NUMBER

WKT

Finish (WKT Only)

MFC


AccessoriesMonitor Arms and CPU Holder

STANDARD FEATURES


MA-1 n/a n/a n/a 10 1 $ 590

• Monitor Arm

• Angled Mini Arm

• Satin Chrome

• Acommodates 5-15 Lb. Monitors

• 250N Gas Cylinder

• Through Desk Mount; to pass Cables through Grommet Cutout, Cutout cannot be Smaller than 1.875". If Cables are run through another Access Point, a 0.375" Cutout is required for the Mount Bolt.


MA-1D n/a n/a n/a 10 1 $ 1,118

• Angled Mini Arm

• Satin Chrome

• Accommodates 5-15 lb. Monitors Each Arm

• 250N Gas Cylinder

• Through Desk Mount; to pass Cables through Grommet Cutout, Cutout cannot be Smaller than 1.875". If Cables are run through another Access Point, a 0.375" Cutout is required for the Mount Bolt.

SIT/STAND MONITOR-KEYBOARD ARMmodel w d h wt cu ft list

MKA-1SB STAIN BLACK 28 24 19.875 20 5 $ 913

MKA-1SS SILVER 28 24 19.875 20 5 $ 913

• Single Monitor Arm


• 28" x 18" Worksurface Platform

• Integrated Cable Management

• 6.3" Monitor Height Adjustment

• 180 Degree Independent Monitor Swivel

• Monitor Tilts, Rotates and Pans

• Grommet and Clamp Mount Provided

• 6.5-24.5 lbs. Total Weight Capacity

SIT/STAND MONITOR-KEYBOARD ARMmodel w d h wt cu ft list

MKA-1DB STAIN BLACK 28 24 19.875 25 5 $ 1,048

MKA-1DS SILVER 28 24 19.875 25 5 $ 1,048

• Dual Monitor Arm


• 28" x 18" Worksurface Platform

• Integrated Cable Management

• 6.3" Monitor Height Adjustment

• 180 Degree Independent Monitor Swivel

• Monitor Tilts, Rotates and Pans

• Grommet and Clamp Mount Provided

• 1.5-19.5 lbs. Total Weight Capacity


CPUH-1 8.3 17 18 10 1 $ 187

• CPU Holder

• Fixed or 360° Swivel

• 17" Glide Track

• Soft Touch Adjustment Knob

• Stores CPU Vertically below Worksurface

• Height Adjustable from 14.5" to 22.5"

• Width Adjustable from 3.5" to 9.3"

• All Metal Finish Black Powder Coat

HOW TO ORDER

MODEL NUMBER

MA-1


AccessoriesTask Lights

STANDARD FEATURES


TL-1 Cannot be used with 30" or 36"W Wallmount Organizers

35.04 4.38 1.3 9 0.5 $ 316

TL-2 23.23 4.38 1.3 8 0.3 $ 316

• Energy Efficient T5 3500K Fluorescent Lamp

• Normal Power Factor (NPF) Electronic Ballast

• 9' Black Southwest Rotation Cord with 90˚ Plug

• Center Cord Exit

• On/Off Switch in Center of Fixture

• Prismatic Lens

• UV Stable Silver Reflector

• Screw Mounting

• UL, CUL, Listed


TL-6 Cannot be used with 60"W Units or Less

58.66 4.38 1.3 10 0.7 $ 536

• Energy Efficient T5 3500k Fluorescent Lamp

• Normal Power Factor (NPF) Electronic Ballast

• 9' Black Southwest Rotation Cord with 90˚ Plug

• Center Cord Exit

• On/Off Switch in Center of Fixture

• Prismatic Lens

• UV Stable Silver Reflector

• Screw Mounting

• UL, CUL, Listed


TL-9 6 Watt Warm White LED Lamp

17.52 1.75 1.13 4 0.1 $ 251

TL-10 14 Watt Warm White LED Lamp

34.45 1.75 1.13 6 0.2 $ 287

• Black LED Task Light

• On/Off Switch

• 10' Black Power Cord

• Screw Mounting

• UL, CUL, Listed


TL-14 24 2.94 1 4 0.2 $ 281

TL-15 36 2.94 1 6 0.3 $ 394

TL-16 48 2.94 1 8 0.4 $ 466

• Energy Efficient LED 5200K Bulbs

• Frosted Diffuser

• Silver Frame

• 10' Power Cord

• Aluminum Construction

• Screw Mounting

• UL Listed


TL-27 20 1.25 0.375 3 0.2 $ 176

TL-28 24 1.25 0.375 3 0.3 $ 189

TL-29 32 1.25 0.375 4 0.4 $ 239

TL-30 40 1.25 0.375 4 0.5 $ 270

• Energy Efficient LED 3000K Warm White Bulbs

• Black Solid Aluminum Alloy Base

• Touch and Hold Dimming

• 0-90° Light Angle Adjustment

• 10' Power Cord

• Screw Mounting

• UL Listed


TL-20 7.7 6 15 2 1 $ 614

• Energy Efficient LED 3500K Bulbs

• Silver Frame

• 6' Power Cord

• On/Off Touch Switch with Continuous Dimming

• Clamps to Rim of Worksurface - Cannot be used on Units with Back Panel

• UL Listed

HOW TO ORDER

MODEL NUMBER

TL-1

HOW TO ORDER

MODEL NUMBER

TL-1


AccessoriesPreview Light

STANDARD FEATURES

• UL Listed


TL-S26B 6 18 15 3 2 Single $ 413

TL-26B 6 18 15 4 2 Set of 2 $ 782

• Available in Five Colors

• Desk Top with Free Standing Base

• 18 Fractional Watt Leds at 3500 K Color Temperature

• Feather Touch; ADA-Compliant Power and Light Level Control Switch


• Auto Shut Off After Nine Hours of Continuous Use

• 9' Power Cord


TL-S26C 2 18.13 17.5 3 2 Single $ 418

TL-26C 2 18.13 17.5 4 2 Set of 2 $ 794


• Clamps to Rim of Worksurface





• 9' Power Cord


TL-S26F 10 22.63 40 - 50 8 5 $ 782

• Floor Unit with Free Standing Base


• Height Adjustment from 40" - 50" from floor





• 9' Power Cord

OPTIONS

Finish

C8G Black

C8K Dark Slate

C8H Silver

C8J White

H4F Red

MODEL NUMBER

TL-S26B

Finish

C8G


AccessoriesPower Supplies

STANDARD FEATURES


PSH-16PP SILVER POWDER COAT 5.25 4.25 1.88 3 0.25 $ 319

• Requires Cutout to be Machined at a Factory - Contact your OFS Customer Service Representative for Ordering Information

• Two Electric Outlets

• 6' Hardwire Power Cord

• UL Listed


PS-55 BLACK 5.44 3.38 2.13 1 0.5 $ 196

PS-55W WHITE 5.44 3.38 2.13 1 0.5 $ 196

• Mounts below Worksurface

• Mounting Bracket Included

• Two 12 Amp Power Outlets (Front)

• One Power Outlet (Back)

• Two 2.1 Amp USB Charging Ports

• 10' Power Cord

• UL Listed


PS-60W 3.88 3.88 2 2 0.25 $ 339

• White Power Supply

• Mobile Table Top Unit

• Two 15 Amp Outlets


• 6' Cord

• UL Listed

• NOTE: Includes Interchangeable Green Top Cap

model cu ft list

RJ-11 0.1 $ 41

• Black Voice Hard Wire Jack

RJ-45 0.1 $ 38

• Black Voice and Data Hard Wire Jack


PS-62W 5.5 3.25 6.5 3 0.25 $ 347





• 6' Power Cord

NOTE: Clamp on Accessories will not work on Knife Edge Profile


PS-63W 8 4 6.88 4 0.25 $ 415



• Three 15 Amp Outlets


• One Open Data Port

• 6' Long Cord

NOTE: Clamp on Accessories will not work on Knife Edge Profile


PS-64W 6.5 3 1.88 2 0.25 $ 317





• 6' Long Cord


PS-65W 8 4 1.88 3 0.25 $ 388






• 6' Long Cord

POWER SUPPLY INSERTSmodel list

DGBV15F VGA Gender Charger $ 34

HDFF HDMI Gender Charger $ 49

TDG1026A-8C RJ45 Panel Mount Coupler $ 29

• Use with PS-63W and PS-65W

• Black Only

• UL Listed

HOW TO ORDER

MODEL NUMBER

PSH-16PP



STANDARD FEATURES

• UL Listed


PS-66B BLACK 5.1 4.4 3.25 2 0.25 $ 202

PS-66S SILVER 5.1 4.4 3.25 2 0.25 $ 202

• Requires Cutout to be Machined at a Factory - Contact Your Customer Service Representative for Ordering Information

• One 12 Amp Outlet

• One RJ-45 Data Jack

• Anodized Aluminum Finish

• 9' Cord

• UL Listed


PS-67B BLACK 5.1 4.4 3.25 2 0.25 $ 202

PS-67S SILVER 5.1 4.4 3.25 2 0.25 $ 202




• 9' Cord

• UL Listed


PS-68B BLACK 5.1 4.4 3.25 2 0.25 $ 259

PS-68S SILVER 5.1 4.4 3.25 2 0.25 $ 259





• 9' Cord

• UL Listed


PS-69B BLACK 6 4.4 3.25 3 0.25 $ 290

PS-69S SILVER 6 4.4 3.25 3 0.25 $ 290





• 9' Cord

• UL Listed


PS-70B BLACK 8.1 4.4 3.25 4 0.25 $ 355

PS-70S SILVER 8.1 4.4 3.25 4 0.25 $ 355






• 9' Cord

• UL Listed


PS-71B BLACK 8.13 8.21 2.75 7 0.5 $ 849

PS-71S SILVER 8.13 8.21 2.75 7 0.5 $ 849


SIDE 1:


• One 4.2 Amp USB Module with Two Ports

• One VGA Coupler

• 10' Power Cord

SIDE 2:



• One HDMI Coupler

• 10' Cord


PS-99B BLACK 8.1 4.4 3.25 4 0.25 $ 355

PS-99S SILVER 8.1 4.4 3.25 4 0.25 $ 355




• One HDMI Coupler


• 9' Cord

• UL Listed

HOW TO ORDER

MODEL NUMBER

PS-66B



POWER SUPPLY STANDARD FEATURES

• Requires Cutout to be Machined at a Factory - Contact your Customer Serivce Representative for Ordering Information

• UL Listed


PS-72 3.5 3.5 10.14 2 0.25 $ 150


• Black Pop-Up Power Supply


• 10' Power Cord


PS-73 3.5 3.5 10.14 2 0.25 $ 99


• Black Pop-Up Power Supply


• 10' Power Cord


PS-74 BLACK 3.5 3.5 2.6 1 0.25 $ 127


• 10' Power Cord


PS-75 BLACK 3.5 3.5 2.6 1 0.25 $ 174



• 10' Power Cord


PS-78 8.25 5.25 3.75 5 0.4 $ 561


• Hinged Lid with Cord Management when Closed

• Pass Thru Wire Management Area




• 6' Power Cord


PS-79B BLACK 15.88 4.38 4.38 8 0.6 $ 1,400

PS-79S SILVER 15.88 4.38 4.38 8 0.6 $ 1,400


• One Touch Open and Close

• Safety Photo Electronic Eye Prevents Rotation when Unit is being used


• One CAT6 Data Module

• One HDMI Port

• One 3.5mm Audio Module

• One Two Port USB Charging Port

• One VGA Port

• 12' Cord


PS-80B BLACK 11.75 4.38 4.38 6 0.4 $ 1,247

PS-80S SILVER 11.75 4.38 4.38 6 0.4 $ 1,247


• One Touch Open and Close

• Safety Photo Electronic Eye Prevents Rotation when Unit is being used


• One HDMI Port

• One 2.1 Port USB Charging Port

• 12' Cord

HOW TO ORDER

MODEL NUMBER

PS-72




• UL Listed


PS-77 BLACK 12.5 2.25 1.75 3 0.25 $ 170


• Six 12 Amp Outlets

• Overload Switch

• Surge Protection

• Aluminum Housing

• 10' Power Cord


PS-83WA WHITE 7.3125 2.75 4.125 4 0.25 $ 409


• Brushed Aluminum Top Cap Finish

• Three Power Outlets

• One Duplex USB Charging Port

• 10' Power Cord

• NOTE: Includes Interchangeable White Top Cap


PS-87W White 8 3.25 3.75 4 0.5 $ 748

PS-87B Black 8 3.25 3.75 4 0.5 $ 748


• One Power Outlet

• One USB Charging Port

• Bluetooth Speaker

• 10' Power Cord


PS-88W White 8 3 2.5 3 0.5 $ 748

PS-88B Black 8 3 2.5 3 0.5 $ 748





• 10' Power Cord


PS-91W WHITE 3.88 3.88 4.31 2 0.25 $ 483

PS-91B BLACK 3.88 3.88 4.31 2 0.25 $ 483



• One Duplex USB-A Charger

• One USB-C (18 Watt) Charger

• 10' Power Cord

• UL Listed


PS-92W WHITE 4 4 3.25 3 0.5 $ 262

PS-92B BLACK 4 4 3.25 3 0.5 $ 262



• One USB-A Charging Port

• One USB-C Charging Port

• 10' Power Cord

• UL Listed


PS-93W WHITE 7.38 7 4.38 3 0.5 $ 523

PS-93B BLACK 7.38 7 4.38 3 0.5 $ 523



• Two USB-A Charging Ports

• Two Wireless Charging Mats

• 10' Power Cord

• UL Listed

HOW TO ORDER

MODEL NUMBER

PS-77



STANDARD FEATURES

AVAILABLE ON IMPULSE G2 AND PULSE ONLYmodel w d h wt cu ft list

PS-94W WHITE Outlet Box with SILVER BracketClamp on Unit

5.5 3.25 6.5 6 0.5 $ 482

PS-94B BLACK Outlet Box with BLACK BracketClamp on Unit

5.5 3.25 6.5 6 0.5 $ 482


• Two Outlets

• One Duplex USB Charger in Edge Mount Box

• Four Outlets in Undersurface Box

• 2' Power Cord to Undersurface Power Outlet Box

• 6' Power Cord

• UL Listed

AVAILABLE ON IMPULSE G2 AND PULSE ONLY

model w wt cu ft list

PS-95W Two WHITE Clamp on Units 144 12 2 $ 1,413

PS-95B Two BLACK Clamp on Units 144 12 2 $ 1,413

• Two Height Adjustable Table Electrical Harness

• Two Clamp on Units with One Power Outlet Each and One Duplex USB Charger

• Two Black Undersurface Power Units - Three Power Outlets Each

• Coiled Cord Between Tables

• Coiled Cord Infeed

• Use on Tables up to 72" in Length

• UL Listed

HOW TO ORDER

MODEL NUMBER

PS-94W





PS-60W-BC 3.88 3.88 2 2 0.25 $ 432





• 6' Braided Power Cord

• NOTE: Includes Interchangeable Green Top Cap


PS-83WA-BC WHITE 7.3125 2.75 4.125 4 0.25 $ 588


• Brushed Aluminum Top Cap Finish

• Three Power Outlets

• One Duplex USB Charging Port


• UL Listed

• NOTE: Includes Interchangeable White Top Cap


PS-87W-BC WHITE 8 3.25 3.75 4 0.5 $ 984

PS-87B-BC BLACK 8 3.25 3.75 4 0.5 $ 984






• UL Listed


PS-88W-BC WHITE 8 3 2.5 3 0.5 $ 984

PS-88B-BC BLACK 8 3 2.5 3 0.5 $ 984






• UL Listed


PS-91W-BC WHITE 3.88 3.88 4.31 2 0.25 $ 569

PS-91B-BC BLACK 3.88 3.88 4.31 2 0.25 $ 569



• One Duplex USB-A Charger

• One USB-C (18 Watt) Charger


• UL Listed


PS-92W-BC WHITE 4 4 3.25 3 0.5 $ 338

PS-92B-BC BLACK 4 4 3.25 3 0.5 $ 338



• One USB-A Charging Port

• One USB-C Charging Port


• UL Listed


PS-93W-BC WHITE 7.38 7 4.38 3 0.5 $ 661

PS-93B-BC BLACK 7.38 7 4.38 3 0.5 $ 661



• Two USB-A Charging Ports

• Two Wireless Charging Mats


• UL Listed

OPTIONS

Cord

BC1 Dusk

BC4 Brass

BC5 Peacock

BC15 Zig Zag Fog/Storm

BC17 Zig Zag Berry/Poppy

BC18 Chevron Black/White

HOW TO ORDER SPECIFY: Cord

MODEL NUMBER

PS-60W-BC

Cord

BC1




• UL Listed


PS-37 BLACK 15 9 4.75 12 2 $ 2,398

PS-38 SILVER 15 9 4.75 12 2 $ 2,414


• Six 12 Amp Power Outlets

• Two RJ-45 Cat6 Data Jacks

• One HDMI Port

• One VGA Port

• One Mini Stereo

• 10' Power Cord


PS-81B Black 15.5 9.5 6.75 8 1 $ 1,783

PS-81S Silver 15.5 9.5 6.75 8 1 $ 1,783

• Six 12 Amp Power Outlets

• Two 2 Port 4.2 Amp USB Charging Ports

• One HDMI Port

• One VGA Port

• RJ-11 Voice Jack

• RJ-45 Cat6 Data Jack

• 10' Power Cord

HOW TO ORDER

MODEL NUMBER

PS-37



STANDARD FEATURES

IISLE POWER STATIONmodel w d h wt cu ft list

PS-96S SILVER 18 18 25.5 25 8 $ 2,160

• Twelve Power Outlets

• Three USB Charging Ports

• Three USB-C Charging Ports

• 9' Power Cord

• UL Listed

SCEPTER POWER STATIONmodel w d h wt cu ft list

PS-98B BLACK 11.28 11.28 31.18 15 4 $ 2,172

PS-98W WHITE 11.28 11.28 31.18 15 4 $ 2,172

• Three Wireless Charging Sleeves (One Each Side)

• Three Power Outlets (One Each Side)

• One Duplex USB-A Charging Port (Two Sides)

• One USB-C 60 Watt Charging Port (One Side)

• 10' Power Cord

• UL Listed

HOW TO ORDER

MODEL NUMBER

PS-96S



POWER SUPPLY (VESTA) STANDARD FEATURES

model body finish w d h wt cu ft list

PS-90B BLACK 12 12 28.25 14 4 $ 1,335

PS-90F FOG 12 12 28.25 14 4 $ 1,335

PS-90S STORM 12 12 28.25 14 4 $ 1,335

PS-90W WHITE 12 12 28.25 14 4 $ 1,335

• UL Listed

OPTIONS

Power Accent Finish Cord

When PS-90B is specified:

H8P Black X9 No Cord (H7S only)H7U Standard Black Cord No Braid

BC8 Black Braid $62BC14 Pinstripe Black-White Braid $62

BC18 Chevron Black-White Braid $62

H8N Fog X9 No Cord (H7S only)H7U Standard Black Cord No Braid

BC8 Black Braid $62BC6 Fog Braid $62

H8Q Storm X9 No Cord (H7S only)H7U Standard Black Cord No Braid

BC8 Black Braid $62BC4 Brass Braid $62


When PS-90F is specified:

H8R Berry X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC4 Brass Braid $62BC6 Fog Braid $62

BC7 Berry Braid $62

H8P Black X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC6 Fog Braid $62BC14 Pinstripe Black-White Braid $62

BC15 Zig Zag Fog-Storm Braid $62BC18 Chevron Black-White Braid $62

H8X Honey X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC4 Brass Braid $62BC6 Fog Braid $62

BC2 Poppy Braid $62

H8W Peacock X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC6 Fog Braid $62BC5 Peacock Braid $62


H8U Poppy X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC6 Fog Braid $62BC10 Storm Braid $62

BC19 Chevron Poppy-Fog Braid $62

H8Q Storm X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC1 Dusk Braid $62BC10 Storm Braid $62

BC15 Zig Zag Fog-Storm Braid $62

H8V White X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC5 Peacock Braid $62BC14 Pinstripe Black-White Braid $62

BC19 Chevron Poppy-Fog Braid $62

When PS-90S is specified:

H8P Black X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC8 Black Braid $62BC10 Storm Braid $62


H8N Fog X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC6 Fog Braid $62BC10 Storm Braid $62


When PS-90W is specified:

H8R Berry X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC7 Berry Braid $62BC4 Brass Braid $62

BC2 Poppy Braid $62

H8S Dusk X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC4 Brass Braid $62BC1 Dusk Braid $62

BC10 Storm Braid $62

H8N Fog X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC7 Berry Braid $62BC6 Fog Braid $62


H8T Navy X9 No Cord (H7S only)BC4 Brass Braid $62

BC3 Navy Braid $62 BC2 Poppy Braid $62

H8Q Storm X9 No Cord (H7S only)H7T Standard White Cord No Braid

BC1 Dusk Braid $62BC10 Storm Braid $62


HOW TO ORDER SPECIFY: Power | accent finish | cord.

MODEL NUMBER

PS-90B

Power Accent Finish Cord

X9 H8P H7U

X9 No Lower Power Outlet - Standard

10' Cord

Top:

One 15 Amp Outlet

Two 2.1 Amp USB Charging Ports

One 18 WATT USB-C Charging Port

H7Q Two Lower Power Outlets $15 10' Cord

Top:

One 15 Amp Outlet



H7R Three Lower Power Outlets $43 10' Cord

Top:

One 15 Amp Outlet



H7S Battery Operated $1,136 Removable Charging Cord

Top:

Three 2.1 Amp USB Charging Ports


Body Finish Shown in Shaded Area

Accent Finish Shown in Shaded Area


AccessoriesGrommets and Wire Management

STANDARD FEATURES

model w dia h wt cu ft list

CGB-1 BLACK n/a 2.13 n/a n/a 0.1 $ 44

CGN-1 SATIN NICKEL n/a 2.13 n/a n/a 0.1 $ 44

CBB-1 ANTIQUE BRASS n/a 2.13 n/a n/a 0.1 $ 44

• Grommet

• Field Installable - For Cutout to be Machined at a Factory, Contact your Customer Serivce Representative for Ordering Information

• Inside Dimensions with Inserts .5625" Diameter

• Inside Dimensions without Inserts 1.8125" Diameter


RGB-1 BLACK 3.38 2 n/a n/a 0.1 $ 73

RGN-1 NICKEL 3.38 2 n/a n/a 0.1 $ 73

RGS-1 ANTIQUE BRASS 3.38 2 n/a n/a 0.1 $ 73

• Grommet

• Reuires Cutout to be Machined at a Factory, Contact your Customer Serivce Representative for Ordering Information

• Rectangular Grommet

• Inside Dimensions with Inserts 1.5" x .75"

• Inside Dimensions without Inserts 2.9375" x 1.5

HOW TO ORDER

MODEL NUMBER

CGB-1


AccessoriesWire Management and Charging Unit

STANDARD FEATURES


WM-12 12 2.5 1.13 n/a 0.1 $ 46

WM-24 24 2.5 1.13 n/a 0.1 $ 58

WM-36 36 2.5 1.13 n/a 0.2 $ 69

WM-48 47.5 2.5 1.13 n/a 0.2 $ 77

WM-60 59.5 2.5 1.13 n/a 0.3 $ 83

WM-72 71.5 2.5 1.13 n/a 0.3 $ 94


WM-V4 4 1 n/a n/a 0.1 $ 37

• Velcro Wire Manager

• Set of Four

model h wt cu ft list

WM-HA6 48 1 0.1 $ 92

• Fabric Wire Manager Closed by Velcro

• Easily Cut to Different Lengths if Needed

• Can Access Wires Anywhere in the Length

• Use when Power Infeed is Routed Outside of Legs


WC-2 BLACK 4.5 4.5 1.375 0.1 0.5 $ 386

• Field Installed Wireless Charging Unit

• Must be Routed in from Bottom Side of Top 1/4" from Face

• 15 WATT Charging Speed

• Cover Cap is Exposed 5/8" Below Surface

• Location Decal Provided for Face of Top

• 5' Cord

OPTIONS

Finish (WM-HA6 Only)

BLK8 Black

GRY8 Grey

WHT8 White

HOW TO ORDER SPECIFY: Finish.

MODEL NUMBER

WM-HA6

Finish (WM-HA6 Only)

BLK8


AccessoriesPind

PEG BOARDS/PEGS STANDARD FEATURES

• Painted Birch Plywood • Hang Rails Included • 1" Dia. Peg Opening

PEG BOARD model w d h wt cu ft list

PND-3232PB 32 1.25 32 20 3 $ 655

PND-3636PB 36 1.25 36 20 4 $ 669

PEG BOARD model w d h wt cu ft list

PND-4832PB (shown) 48 1.25 32 29 4 $ 732

PND-6032PB 60 1.25 32 29 5 $ 860

• NOTE: Can be Hung Horizontal or Vertical

PEG BOARD


PND-7232PB (shown) 72 1.25 32 38 7 $ 988

PND-8432PB 84 1.25 32 42 8 $ 1,111

OPTIONS

Finish

BLK Black

IRN Iron

WHT White

Studio Paints (10% upcharge)

BLUS Blush

CIDR Cider

DIJO Dijon

FALO Fallow

FERN Fern

MDNT Midnight

PINE Pine

TUND Tundra

HOW TO ORDER SPECIFY: Finish.

MODEL NUMBER

PND-3232PB

Finish

BLK


AccessoriesPind

PEG BOARD SHELF KIT STANDARD FEATURES

• Solid White Oak

• Pegs come with grooves that contain rubber O-rings

PEG BOARD SHELF KITmodel w d h wt cu ft list

PND-1405PBSK 14 5 0.75 4 0.25 $ 269

PND-1805PBSK (shown) 18 5 0.75 5 0.25 $ 287

• One Shelf with Two 1" Dia. Pegs

• Grooved on both sides (One Centered, One 1.375" from Edge)

PEGSmodel w d h wt cu ft list

PND-PBP 5 1 1 1 0.125 $ 218

• Lock in Place with a Twist

Top Side

Reverse Side

OPTIONS

Shelf Finish (not available on PND-PBP) Peg Finish

MMCQECMLCBUW DSTEBY MVW MNWMGWMBMMHM PCOMGOCLE Clear

BLK Black

IRN Iron

WHT White

Studio Paints (10% upcharge)

BLUS Blush

CIDR Cider

DIJO Dijon

FALO Fallow

FERN Fern

MDNT Midnight

PINE Pine

TUND Tundra

HOW TO ORDER SPECIFY: Shelf finish (if applicable) | peg finish. See page H for the designator finish name.

MODEL NUMBER

PND-1405PBSK

Shelf Finish (not available on PND-PBP) Peg Finish

MMC BLK


AccessoriesPower Cutout Location

POWER CUTOUT LOCATIONS

To order, add location code(s) to model number.

Example: 4-48RT | LC2 | EW | QV

Model Number Finish Edge Power Cutout

NO CUTOUT

QR No cutout

POWER CUTOUTS BETWEEN BASES

QS Between 1st base and 2nd base QT Between 2nd base and 3rd base

POWER CUTOUTS OVER BASES

QV Over 1st base QW Over 2nd base QX Over 3rd base

QS

QS

QS QT

QV

QV

QV

QV QW

QW

QV QW

QV QX

QV QXQW


AccessoriesPower Supplies / Bases

POWER SUPPLIES / CONFERENCE BASES

When centering a power supply over a base, please refer to the following:

Y = Can use standard base

M = Base must be a modification

X = Not Applicable - PS will not work over base

* Power supplies will not be concealed by base but may be located in center of base (in the V) ** PS-78, PS-79B, PS-79S, PS-80B and PS-80S will fit over these bases if the Power Supply is rotated. The base and corresponding top will need to be modified.

DESCRIPTION MODEL NO. PSH-16PPPS-66BPS-66S

PS-67BPS-67S

PS-68BPS-68S

PS-69BPS-69S

PS-70BPS-70S PS-99BPS-99S PS-71

PS-72PS-73

PS-74PS-75 PS-78

PS-79BPS-79S

PS-80BPS-80S

PS-37PS-38PS-81BPS-81S

PS-91WPS-91B

PS-92WPS-92B PS-93WPS-93B

CGB-1RGB-1RGN-1RGS-1

Cylinder 4-20CB Y Y Y Y M M M Y Y M M M M Y Y

Panel 4-21PB X X X X X X X X X X X X X X X

Panel 4-21PBW X X X X X X X X X X X X X X X

V-Base* 4-22VB Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y* Y*

Ellipse 4-24EB X X X X X X X Y Y X X X X Y Y

Panel 4-24PB X X X X X X X X X X X X X X X

Panel 4-24PBW X X X X X X X X X X X X X X X

Cylinder 11-M20CB Y Y Y Y M M M Y Y M M M M Y Y

Panel 11-M21PB X X X X X X X X X X X X X X X

Panel 11-M21PBW X X X X X X X X X X X X X X X

V-Base* 11-M22VB Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y* Y*

Ellipse 11-M24EB X X X X X X X Y Y* X X X X Y Y*


Panel 11-M24PBW X X X X X X X X X X X X X X X

Queen Anne 23-WQB36 X X X X X X X X X X X X X X X

Square 23-WSB16 Y Y Y Y M M M Y Y M X M X Y Y

Square 23-WSB20 Y Y Y Y M M M Y Y M M M M Y Y



Queen Anne 23-MQB36 X X X X X X X X X X X X X X X

Square 23-MSB16 Y Y Y Y M M M Y Y M X M X Y Y

Square 23-MSB20 Y Y Y Y M M M Y Y M M M M Y Y

Cylinder CB-18 Y Y Y Y M M M Y Y M X M X Y Y

Cylinder CB-20 Y Y Y Y M M M Y Y M M M M Y Y

Half Cylinder HC-18 Y Y Y Y M M X Y Y M X X X Y Y

Half Cylinder HC-24 Y Y Y Y M M X** Y Y M X** X** X Y Y

Panel PB-21 X X X X X X X X X X X X X X X

Panel PBW-21 X X X X X X X X X X X X X X X

Panel PB-24 X X X X X X X X X X X X X X X

Panel PBW-24 X X X X X X X X X X X X X X X

Square SB-16 Y Y Y Y M M M Y Y M X M X Y Y

Square SB-20 Y Y Y Y M M M Y Y M M M M Y Y

V-Base* VB-22 Y* Y* Y* Y* M* M* X Y* Y* M* X X X Y* Y

Panel PBT-M24 X X X X X X X Y X X X X X Y Y

Panel PBT-W24 X X X X X X X Y X X X X X Y Y


AccessoriesFiling Configurations

FILING CONFIGURATIONS

OFS offers a multitude of filing options for storage flexibility. All filing configurations meet standard file tab clearance of 1.25" above the file

frame as recommended by our file frame suppliers.

Pedestals

Lateral Files

Lateral Files: Legal and Letter Front-to-Back

LetterSide-to-Side

DesksCredenzasReturns

LetterFront-to-Back


LegalSide-to-Side


LetterDouble Front-to-Back

Letter Side-to-Side

LegalSide-to-Side

Legal and Letter Front-to-Back

Pulse Quest - Veneer Cambria - Cambria - Quest - Laminate Veneer Laminate

4-7236SCL4-3656LF44-3622LF24-3621MFC

11-7222CLF11-3858LF411-3822LF211-7222CRLL211-7222CRRL211-6622CRLL211-6622CRRL211-M3658LF411-M3622LF211-M7222CRLL211-M7222CRRL211-M6622CRLL211-M6622CRRL2

23-W3620LFC23-W3654LFC23-W7220CRLL23-W7220CRRL

23-M3620LFC23-M3654LFC23-M7220CRLL23-M7220CRRL


Accessories

Date post:	23-Mar-2020
Category:	Documents
Upload:	others
View:	11 times
Download:	0 times

LOCK / KEYThere is no additional charge for key numbers 151‑999 but they could potentially add...

Documents