Lock Replacement

  

Step 1:

Cut insulation behind lock mechanism.

Step 2:

After insulation is cut, the nut behind the lock will be revealed. Next you want to remove the nut be screwing in a counter-clockwise direction

Step 3:

Damaged lock is now removed. Insert new lock through Front.

Step 4:

Begin tightening nut behind the new lock, its easier to start with your fingers, then completely tighten with plyers or wrench.

Step 5:

Now that new lock is secure, place Chrome tape over the hole that you cut to remove lock. If there

are any issues with new lock, Please contact: Tech support @ 866-599-0214