1
To Remove: To Install: DEF-LOCTM Model# GG-EZDEF1 Locking DEF Cap for '13+ Dodge Ram Diesels DEF-LOCTM www.genosgarage.com 770-886-2500 Geno’s Garage, 1150 Samples Industrial Dr., Cumming, GA 30041, 770-886-2500 Align the Secure Key over the screw head and slip it on. Align the Secure Key over the screw head and slip it on. Align the Secure Key over the screw head and slip it on. Turn the Secure Key counterclockwise until it stops. Again, do not overtorque the key. It will break/twist off the c-clip. Remove the Secure Key. Remove the cap from the filler neck by screwing unit counter clockwise and pulling up. Turn the Secure Key clockwise until the screw is LIGHTLY tight. CAUTION: Yes, we're shouting "LIGHTLY." If you overtwist the key it will break/twist off the small c-clip that holds the lock in place. Remove Secure Key. Unit will be secured. Turn the Secure Key counterclockwise until it stops. Remove Secure Key. Locking Ward will be fully up in its retracted position. Slide unit in filler neck and turn clockwise until it stops. Lightly tightening the Secure Screw is enough to ensure a secure system and an easy-to-unlock cap for the future.
![MARINE DIESELS WORKING CYCLE MONITORING ON THE BASE … diesels … · engines of Wartsila RT-flex and MAN ME types. Fig. 1. IMES GmbH pressure sensor [1] These types of diesels need](https://static.documents.pub/doc/80x56/5eabde67f5ecbf463c2ed6a2/marine-diesels-working-cycle-monitoring-on-the-base-diesels-engines-of-wartsila.jpg)
