Login to client 100 or (any client) and activate applications In client .
Tcode: SPRO (Go to SPRO GRCGeneral Settings)
Then activate activate applications In client.
Click on new entries.
Then generate Transport request and save it .
Activate SICF Services:
Execute SICF T-code :And select Services, then execute.
Right click on Default _hosts and select activate.
Activate BC Sets for Access control: (T-code:SCPR20 or Goto SPROGRC
Activate bellow *GRC*,*GRAC* BC stes.
Note: If you implement PCand RM you need to activate related that BC sets
Note: Select only expert mode and Do not overwrite default values.
Then click on continue.
(If you get warnings that are acceptable.)
Connectors Steps:
Step1: Create RFC connection from GRC to ERP (Ex: 100 client to 200 client) and test the connection. Through SM59 or with bellow path
create connector(Execute SPRO-GRC-CCS-IF)
Step2: Maintain connectors and connection Types.
Note: Target connector and logical port should be same.
Create Subsequent connector:Select connector and double click on subsequent connector, then new entries.
Note: Target connector and logical port should be same.
Define Group: select subsequent connector and double click on Define connector Group then click on new entries.
Assign connector to connector Types:
Select connector group and double click on Assign connector to connector Types.
Then click on new entries.
Select logical group.
Assign connectors to connectors groups:
Select logical group and double click on Assign connectors to connectors groups.
Maintain Connection Settings:
SPROGRC--CCS-IF-- Maintain Connection Settings
Select Auth-Double click on Scenario connection type link--select SAP connection Type and double click on Scenario connector link .
New entries----…….
Repeat same process as AUTH for PROV, ROLMG, SUPMG
Schedule Background jobs:PathSPRO--GRC-AC--Sync jobs---
Do for Repository and select if first time schedule the job in full sync mode.
Do for action usage sync also.
Do for role usage sync:
Job Names:
Maintain Configuration Settings(Parameter maintenance.)
Maintain Connector Settings:
Note: Environment Should be Production.
Maintain mappings for actions and connector groups:
Click on new entries.
Save.
Select connector group and double click onassign default connector group.